gcloud 0.0.7 → 0.1.0

data/packages/gsutil/boto/tests/integration/s3/other_cacerts.txt

@@ -1,70 +0,0 @@
-# Certifcate Authority certificates for validating SSL connections.
-#
-# This file contains PEM format certificates generated from
-# http://mxr.mozilla.org/seamonkey/source/security/nss/lib/ckfw/builtins/certdata.txt
-#
-# ***** BEGIN LICENSE BLOCK *****
-# Version: MPL 1.1/GPL 2.0/LGPL 2.1
-#
-# The contents of this file are subject to the Mozilla Public License Version
-# 1.1 (the "License"); you may not use this file except in compliance with
-# the License. You may obtain a copy of the License at
-# http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS IS" basis,
-# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
-# for the specific language governing rights and limitations under the
-# License.
-#
-# The Original Code is the Netscape security libraries.
-#
-# The Initial Developer of the Original Code is
-# Netscape Communications Corporation.
-# Portions created by the Initial Developer are Copyright (C) 1994-2000
-# the Initial Developer. All Rights Reserved.
-#
-# Contributor(s):
-#
-# Alternatively, the contents of this file may be used under the terms of
-# either the GNU General Public License Version 2 or later (the "GPL"), or
-# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
-# in which case the provisions of the GPL or the LGPL are applicable instead
-# of those above. If you wish to allow use of your version of this file only
-# under the terms of either the GPL or the LGPL, and not to allow others to
-# use your version of this file under the terms of the MPL, indicate your
-# decision by deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL or the LGPL. If you do not delete
-# the provisions above, a recipient may use your version of this file under
-# the terms of any one of the MPL, the GPL or the LGPL.
-#
-# ***** END LICENSE BLOCK *****
-
-
-Comodo CA Limited, CN=Trusted Certificate Services
-==================================================
-
------BEGIN CERTIFICATE-----
-MIIEQzCCAyugAwIBAgIBATANBgkqhkiG9w0BAQUFADB/MQswCQYDVQQGEwJHQjEb
-MBkGA1UECAwSR3JlYXRlciBNYW5jaGVzdGVyMRAwDgYDVQQHDAdTYWxmb3JkMRow
-GAYDVQQKDBFDb21vZG8gQ0EgTGltaXRlZDElMCMGA1UEAwwcVHJ1c3RlZCBDZXJ0
-aWZpY2F0ZSBTZXJ2aWNlczAeFw0wNDAxMDEwMDAwMDBaFw0yODEyMzEyMzU5NTla
-MH8xCzAJBgNVBAYTAkdCMRswGQYDVQQIDBJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAO
-BgNVBAcMB1NhbGZvcmQxGjAYBgNVBAoMEUNvbW9kbyBDQSBMaW1pdGVkMSUwIwYD
-VQQDDBxUcnVzdGVkIENlcnRpZmljYXRlIFNlcnZpY2VzMIIBIjANBgkqhkiG9w0B
-AQEFAAOCAQ8AMIIBCgKCAQEA33FvNlhTWvI2VFeAxHQIIO0Yfyod5jWaHiWsnOWW
-fnJSoBVC21ndZHoa0Lh73TkVvFVIxO06AOoxEbrycXQaZ7jPM8yoMa+j49d/vzMt
-TGo87IvDktJTdyR0nAducPy9C1t2ul/y/9c3S0pgePfw+spwtOpZqqPOSC+pw7IL
-fhdyFgymBwwbOM/JYrc/oJOlh0Hyt3BAd9i+FHzjqMB6juljatEPmsbS9Is6FARW
-1O24zG71++IsWL1/T2sr92AkWCTOJu80kTrV44HQsvAEAtdbtz6SrGsSivnkBbA7
-kUlcsutT6vifR4buv5XAwAaf0lteERv0xwQ1KdJVXOTt6wIDAQABo4HJMIHGMB0G
-A1UdDgQWBBTFe1i97doladL3WRaoszLAeydb9DAOBgNVHQ8BAf8EBAMCAQYwDwYD
-VR0TAQH/BAUwAwEB/zCBgwYDVR0fBHwwejA8oDqgOIY2aHR0cDovL2NybC5jb21v
-ZG9jYS5jb20vVHJ1c3RlZENlcnRpZmljYXRlU2VydmljZXMuY3JsMDqgOKA2hjRo
-dHRwOi8vY3JsLmNvbW9kby5uZXQvVHJ1c3RlZENlcnRpZmljYXRlU2VydmljZXMu
-Y3JsMA0GCSqGSIb3DQEBBQUAA4IBAQDIk4E7ibSvuIQSTI3S8NtwuleGFTQQuS9/
-HrCoiWChisJ3DFBKmwCL2Iv0QeLQg4pKHBQGsKNoBXAxMKdTmw7pSqBYaWcOrp32
-pSxBvzwGa+RZzG0Q8ZZvH9/0BAKkn0U+yNj6NkZEUD+Cl5EfKNsYEYwq5GWDVxIS
-jBc/lDb+XbDABHcTuPQV1T84zJQ6VdCsmPW6AF/ghhmBeC8owH7TzEIK9a5QoNE+
-xqFx7D+gIIxmOom0jtTYsU0lR+4viMi14QVFwL4Ucd56/Y57fU0IlqUSc/Atyjcn
-dBInTMu2l+nZrghtWjlA3QVHdWpaIbOjGM9O9y5Xt5hwXsjEeLBi
------END CERTIFICATE-----

data/packages/gsutil/boto/tests/integration/s3/test_bucket.py

@@ -1,263 +0,0 @@
-# -*- coding: utf-8 -*-
-
-# Copyright (c) 2011 Mitch Garnaat http://garnaat.org/
-# All rights reserved.
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish, dis-
-# tribute, sublicense, and/or sell copies of the Software, and to permit
-# persons to whom the Software is furnished to do so, subject to the fol-
-# lowing conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABIL-
-# ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
-# SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-"""
-Some unit tests for the S3 Bucket
-"""
-
-import unittest
-import time
-
-from boto.exception import S3ResponseError
-from boto.s3.connection import S3Connection
-from boto.s3.bucketlogging import BucketLogging
-from boto.s3.lifecycle import Lifecycle
-from boto.s3.lifecycle import Transition
-from boto.s3.lifecycle import Rule
-from boto.s3.acl import Grant
-from boto.s3.tagging import Tags, TagSet
-from boto.s3.lifecycle import Lifecycle, Expiration, Transition
-from boto.s3.website import RedirectLocation
-
-
-class S3BucketTest (unittest.TestCase):
-    s3 = True
-
-    def setUp(self):
-        self.conn = S3Connection()
-        self.bucket_name = 'bucket-%d' % int(time.time())
-        self.bucket = self.conn.create_bucket(self.bucket_name)
-
-    def tearDown(self):
-        for key in self.bucket:
-            key.delete()
-        self.bucket.delete()
-
-    def test_next_marker(self):
-        expected = ["a/", "b", "c"]
-        for key_name in expected:
-            key = self.bucket.new_key(key_name)
-            key.set_contents_from_string(key_name)
-
-        # Normal list of first 2 keys will have
-        # no NextMarker set, so we use last key to iterate
-        # last element will be "b" so no issue.
-        rs = self.bucket.get_all_keys(max_keys=2)
-        for element in rs:
-            pass
-        self.assertEqual(element.name, "b")
-        self.assertEqual(rs.next_marker, None)
-
-        # list using delimiter of first 2 keys will have
-        # a NextMarker set (when truncated). As prefixes
-        # are grouped together at the end, we get "a/" as
-        # last element, but luckily we have next_marker.
-        rs = self.bucket.get_all_keys(max_keys=2, delimiter="/")
-        for element in rs:
-            pass
-        self.assertEqual(element.name, "a/")
-        self.assertEqual(rs.next_marker, "b")
-
-        # ensure bucket.list() still works by just
-        # popping elements off the front of expected.
-        rs = self.bucket.list()
-        for element in rs:
-            self.assertEqual(element.name, expected.pop(0))
-        self.assertEqual(expected, [])
-
-    def test_logging(self):
-        # use self.bucket as the target bucket so that teardown
-        # will delete any log files that make it into the bucket
-        # automatically and all we have to do is delete the
-        # source bucket.
-        sb_name = "src-" + self.bucket_name
-        sb = self.conn.create_bucket(sb_name)
-        # grant log write perms to target bucket using canned-acl
-        self.bucket.set_acl("log-delivery-write")
-        target_bucket = self.bucket_name
-        target_prefix = u"jp/ログ/"
-        # Check existing status is disabled
-        bls = sb.get_logging_status()
-        self.assertEqual(bls.target, None)
-        # Create a logging status and grant auth users READ PERM
-        authuri = "http://acs.amazonaws.com/groups/global/AuthenticatedUsers"
-        authr = Grant(permission="READ", type="Group", uri=authuri)
-        sb.enable_logging(target_bucket, target_prefix=target_prefix, grants=[authr])
-        # Check the status and confirm its set.
-        bls = sb.get_logging_status()
-        self.assertEqual(bls.target, target_bucket)
-        self.assertEqual(bls.prefix, target_prefix)
-        self.assertEqual(len(bls.grants), 1)
-        self.assertEqual(bls.grants[0].type, "Group")
-        self.assertEqual(bls.grants[0].uri, authuri)
-        # finally delete the src bucket
-        sb.delete()
-
-    def test_tagging(self):
-        tagging = """
-            <Tagging>
-              <TagSet>
-                 <Tag>
-                   <Key>tagkey</Key>
-                   <Value>tagvalue</Value>
-                 </Tag>
-              </TagSet>
-            </Tagging>
-        """
-        self.bucket.set_xml_tags(tagging)
-        response = self.bucket.get_tags()
-        self.assertEqual(response[0][0].key, 'tagkey')
-        self.assertEqual(response[0][0].value, 'tagvalue')
-        self.bucket.delete_tags()
-        try:
-            self.bucket.get_tags()
-        except S3ResponseError, e:
-            self.assertEqual(e.code, 'NoSuchTagSet')
-        except Exception, e:
-            self.fail("Wrong exception raised (expected S3ResponseError): %s"
-                      % e)
-        else:
-            self.fail("Expected S3ResponseError, but no exception raised.")
-
-    def test_tagging_from_objects(self):
-        """Create tags from python objects rather than raw xml."""
-        t = Tags()
-        tag_set = TagSet()
-        tag_set.add_tag('akey', 'avalue')
-        tag_set.add_tag('anotherkey', 'anothervalue')
-        t.add_tag_set(tag_set)
-        self.bucket.set_tags(t)
-        response = self.bucket.get_tags()
-        self.assertEqual(response[0][0].key, 'akey')
-        self.assertEqual(response[0][0].value, 'avalue')
-        self.assertEqual(response[0][1].key, 'anotherkey')
-        self.assertEqual(response[0][1].value, 'anothervalue')
-
-    def test_website_configuration(self):
-        response = self.bucket.configure_website('index.html')
-        self.assertTrue(response)
-        config = self.bucket.get_website_configuration()
-        self.assertEqual(config, {'WebsiteConfiguration':
-                                  {'IndexDocument': {'Suffix': 'index.html'}}})
-        config2, xml = self.bucket.get_website_configuration_with_xml()
-        self.assertEqual(config, config2)
-        self.assertTrue('<Suffix>index.html</Suffix>' in xml, xml)
-
-    def test_website_redirect_all_requests(self):
-        response = self.bucket.configure_website(
-            redirect_all_requests_to=RedirectLocation('example.com'))
-        config = self.bucket.get_website_configuration()
-        self.assertEqual(config, {
-            'WebsiteConfiguration': {
-                'RedirectAllRequestsTo': {
-                    'HostName': 'example.com'}}})
-
-        # Can configure the protocol as well.
-        response = self.bucket.configure_website(
-            redirect_all_requests_to=RedirectLocation('example.com', 'https'))
-        config = self.bucket.get_website_configuration()
-        self.assertEqual(config, {
-            'WebsiteConfiguration': {'RedirectAllRequestsTo': {
-                'HostName': 'example.com',
-                'Protocol': 'https',
-            }}}
-        )
-
-    def test_lifecycle(self):
-        lifecycle = Lifecycle()
-        lifecycle.add_rule('myid', '', 'Enabled', 30)
-        self.assertTrue(self.bucket.configure_lifecycle(lifecycle))
-        response = self.bucket.get_lifecycle_config()
-        self.assertEqual(len(response), 1)
-        actual_lifecycle = response[0]
-        self.assertEqual(actual_lifecycle.id, 'myid')
-        self.assertEqual(actual_lifecycle.prefix, '')
-        self.assertEqual(actual_lifecycle.status, 'Enabled')
-        self.assertEqual(actual_lifecycle.transition, None)
-
-    def test_lifecycle_with_glacier_transition(self):
-        lifecycle = Lifecycle()
-        transition = Transition(days=30, storage_class='GLACIER')
-        rule = Rule('myid', prefix='', status='Enabled', expiration=None,
-                    transition=transition)
-        lifecycle.append(rule)
-        self.assertTrue(self.bucket.configure_lifecycle(lifecycle))
-        response = self.bucket.get_lifecycle_config()
-        transition = response[0].transition
-        self.assertEqual(transition.days, 30)
-        self.assertEqual(transition.storage_class, 'GLACIER')
-        self.assertEqual(transition.date, None)
-
-    def test_lifecycle_multi(self):
-        date = '2022-10-12T00:00:00.000Z'
-        sc = 'GLACIER'
-        lifecycle = Lifecycle()
-        lifecycle.add_rule("1", "1/", "Enabled", 1)
-        lifecycle.add_rule("2", "2/", "Enabled", Expiration(days=2))
-        lifecycle.add_rule("3", "3/", "Enabled", Expiration(date=date))
-        lifecycle.add_rule("4", "4/", "Enabled", None,
-            Transition(days=4, storage_class=sc))
-        lifecycle.add_rule("5", "5/", "Enabled", None,
-            Transition(date=date, storage_class=sc))
-        # set the lifecycle
-        self.bucket.configure_lifecycle(lifecycle)
-        # read the lifecycle back
-        readlifecycle = self.bucket.get_lifecycle_config();
-        for rule in readlifecycle:
-            if rule.id == "1":
-                self.assertEqual(rule.prefix, "1/")
-                self.assertEqual(rule.expiration.days, 1)
-            elif rule.id == "2":
-                self.assertEqual(rule.prefix, "2/")
-                self.assertEqual(rule.expiration.days, 2)
-            elif rule.id == "3":
-                self.assertEqual(rule.prefix, "3/")
-                self.assertEqual(rule.expiration.date, date)
-            elif rule.id == "4":
-                self.assertEqual(rule.prefix, "4/")
-                self.assertEqual(rule.transition.days, 4)
-                self.assertEqual(rule.transition.storage_class, sc)
-            elif rule.id == "5":
-                self.assertEqual(rule.prefix, "5/")
-                self.assertEqual(rule.transition.date, date)
-                self.assertEqual(rule.transition.storage_class, sc)
-            else:
-                self.fail("unexpected id %s" % rule.id)
-
-    def test_lifecycle_jp(self):
-        # test lifecycle with Japanese prefix
-        name = "Japanese files"
-        prefix = u"日本語/"
-        days = 30
-        lifecycle = Lifecycle()
-        lifecycle.add_rule(name, prefix, "Enabled", days)
-        # set the lifecycle
-        self.bucket.configure_lifecycle(lifecycle)
-        # read the lifecycle back
-        readlifecycle = self.bucket.get_lifecycle_config();
-        for rule in readlifecycle:
-            self.assertEqual(rule.id, name)
-            self.assertEqual(rule.expiration.days, days)
-            #Note: Boto seems correct? AWS seems broken?
-            #self.assertEqual(rule.prefix, prefix)

data/packages/gsutil/boto/tests/integration/s3/test_cert_verification.py

@@ -1,40 +0,0 @@
-# Copyright (c) 2012 Mitch Garnaat http://garnaat.org/
-# Copyright (c) 2012 Amazon.com, Inc. or its affiliates.
-# All rights reserved.
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish, dis-
-# tribute, sublicense, and/or sell copies of the Software, and to permit
-# persons to whom the Software is furnished to do so, subject to the fol-
-# lowing conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABIL-
-# ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
-# SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-"""
-Check that all of the certs on SQS endpoints validate.
-"""
-
-import unittest
-import boto.s3
-
-
-class CertVerificationTest(unittest.TestCase):
-
-    s3 = True
-    ssl = True
-
-    def test_certs(self):
-        for region in boto.s3.regions():
-            c = region.connect()
-            c.get_all_buckets()

data/packages/gsutil/boto/tests/integration/s3/test_connection.py

@@ -1,245 +0,0 @@
-# -*- coding: utf-8 -*-
-# Copyright (c) 2006-2011 Mitch Garnaat http://garnaat.org/
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish, dis-
-# tribute, sublicense, and/or sell copies of the Software, and to permit
-# persons to whom the Software is furnished to do so, subject to the fol-
-# lowing conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABIL-
-# ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
-# SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
-# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
-# IN THE SOFTWARE.
-
-"""
-Some unit tests for the S3Connection
-"""
-
-import unittest
-import time
-import os
-import urllib
-import urlparse
-import httplib
-from boto.s3.connection import S3Connection
-from boto.s3.bucket import Bucket
-from boto.exception import S3PermissionsError, S3ResponseError
-
-
-class S3ConnectionTest (unittest.TestCase):
-    s3 = True
-
-    def test_1_basic(self):
-        print '--- running S3Connection tests ---'
-        c = S3Connection()
-        # create a new, empty bucket
-        bucket_name = 'test-%d' % int(time.time())
-        bucket = c.create_bucket(bucket_name)
-        # now try a get_bucket call and see if it's really there
-        bucket = c.get_bucket(bucket_name)
-        # test logging
-        logging_bucket = c.create_bucket(bucket_name + '-log')
-        logging_bucket.set_as_logging_target()
-        bucket.enable_logging(target_bucket=logging_bucket, target_prefix=bucket.name)
-        bucket.disable_logging()
-        c.delete_bucket(logging_bucket)
-        k = bucket.new_key('foobar')
-        s1 = 'This is a test of file upload and download'
-        s2 = 'This is a second string to test file upload and download'
-        k.set_contents_from_string(s1)
-        fp = open('foobar', 'wb')
-        # now get the contents from s3 to a local file
-        k.get_contents_to_file(fp)
-        fp.close()
-        fp = open('foobar')
-        # check to make sure content read from s3 is identical to original
-        assert s1 == fp.read(), 'corrupted file'
-        fp.close()
-        # test generated URLs
-        url = k.generate_url(3600)
-        file = urllib.urlopen(url)
-        assert s1 == file.read(), 'invalid URL %s' % url
-        url = k.generate_url(3600, force_http=True)
-        file = urllib.urlopen(url)
-        assert s1 == file.read(), 'invalid URL %s' % url
-        url = k.generate_url(3600, force_http=True, headers={'x-amz-x-token' : 'XYZ'})
-        file = urllib.urlopen(url)
-        assert s1 == file.read(), 'invalid URL %s' % url
-        rh = {'response-content-disposition': 'attachment; filename="foo.txt"'}
-        url = k.generate_url(60, response_headers=rh)
-        file = urllib.urlopen(url)
-        assert s1 == file.read(), 'invalid URL %s' % url
-        #test whether amperands and to-be-escaped characters work in header filename
-        rh = {'response-content-disposition': 'attachment; filename="foo&z%20ar&ar&zar&bar.txt"'}
-        url = k.generate_url(60, response_headers=rh, force_http=True)
-        file = urllib.urlopen(url)
-        assert s1 == file.read(), 'invalid URL %s' % url
-        # overwrite foobar contents with a PUT
-        url = k.generate_url(3600, 'PUT', force_http=True, policy='private', reduced_redundancy=True)
-        up = urlparse.urlsplit(url)
-        con = httplib.HTTPConnection(up.hostname, up.port)
-        con.request("PUT", up.path + '?' + up.query, body="hello there")
-        resp = con.getresponse()
-        assert 200 == resp.status
-        assert "hello there" == k.get_contents_as_string()
-        bucket.delete_key(k)
-        # test a few variations on get_all_keys - first load some data
-        # for the first one, let's override the content type
-        phony_mimetype = 'application/x-boto-test'
-        headers = {'Content-Type': phony_mimetype}
-        k.name = 'foo/bar'
-        k.set_contents_from_string(s1, headers)
-        k.name = 'foo/bas'
-        k.set_contents_from_filename('foobar')
-        k.name = 'foo/bat'
-        k.set_contents_from_string(s1)
-        k.name = 'fie/bar'
-        k.set_contents_from_string(s1)
-        k.name = 'fie/bas'
-        k.set_contents_from_string(s1)
-        k.name = 'fie/bat'
-        k.set_contents_from_string(s1)
-        # try resetting the contents to another value
-        md5 = k.md5
-        k.set_contents_from_string(s2)
-        assert k.md5 != md5
-        os.unlink('foobar')
-        all = bucket.get_all_keys()
-        assert len(all) == 6
-        rs = bucket.get_all_keys(prefix='foo')
-        assert len(rs) == 3
-        rs = bucket.get_all_keys(prefix='', delimiter='/')
-        assert len(rs) == 2
-        rs = bucket.get_all_keys(maxkeys=5)
-        assert len(rs) == 5
-        # test the lookup method
-        k = bucket.lookup('foo/bar')
-        assert isinstance(k, bucket.key_class)
-        assert k.content_type == phony_mimetype
-        k = bucket.lookup('notthere')
-        assert k == None
-        # try some metadata stuff
-        k = bucket.new_key('has_metadata')
-        mdkey1 = 'meta1'
-        mdval1 = 'This is the first metadata value'
-        k.set_metadata(mdkey1, mdval1)
-        mdkey2 = 'meta2'
-        mdval2 = 'This is the second metadata value'
-        k.set_metadata(mdkey2, mdval2)
-        # try a unicode metadata value
-        mdval3 = u'föö'
-        mdkey3 = 'meta3'
-        k.set_metadata(mdkey3, mdval3)
-        k.set_contents_from_string(s1)
-        k = bucket.lookup('has_metadata')
-        assert k.get_metadata(mdkey1) == mdval1
-        assert k.get_metadata(mdkey2) == mdval2
-        assert k.get_metadata(mdkey3) == mdval3
-        k = bucket.new_key('has_metadata')
-        k.get_contents_as_string()
-        assert k.get_metadata(mdkey1) == mdval1
-        assert k.get_metadata(mdkey2) == mdval2
-        assert k.get_metadata(mdkey3) == mdval3
-        bucket.delete_key(k)
-        # test list and iterator
-        rs1 = bucket.list()
-        num_iter = 0
-        for r in rs1:
-            num_iter = num_iter + 1
-        rs = bucket.get_all_keys()
-        num_keys = len(rs)
-        assert num_iter == num_keys
-        # try a key with a funny character
-        k = bucket.new_key('testnewline\n')
-        k.set_contents_from_string('This is a test')
-        rs = bucket.get_all_keys()
-        assert len(rs) == num_keys + 1
-        bucket.delete_key(k)
-        rs = bucket.get_all_keys()
-        assert len(rs) == num_keys
-        # try some acl stuff
-        bucket.set_acl('public-read')
-        policy = bucket.get_acl()
-        assert len(policy.acl.grants) == 2
-        bucket.set_acl('private')
-        policy = bucket.get_acl()
-        assert len(policy.acl.grants) == 1
-        k = bucket.lookup('foo/bar')
-        k.set_acl('public-read')
-        policy = k.get_acl()
-        assert len(policy.acl.grants) == 2
-        k.set_acl('private')
-        policy = k.get_acl()
-        assert len(policy.acl.grants) == 1
-        # try the convenience methods for grants
-        bucket.add_user_grant('FULL_CONTROL',
-                              'c1e724fbfa0979a4448393c59a8c055011f739b6d102fb37a65f26414653cd67')
-        try:
-            bucket.add_email_grant('foobar', 'foo@bar.com')
-        except S3PermissionsError:
-            pass
-        # now try to create an RRS key
-        k = bucket.new_key('reduced_redundancy')
-        k.set_contents_from_string('This key has reduced redundancy',
-                                   reduced_redundancy=True)
-
-        # now try to inject a response header
-        data = k.get_contents_as_string(response_headers={'response-content-type' : 'foo/bar'})
-        assert k.content_type == 'foo/bar'
-        
-        # now delete all keys in bucket
-        for k in bucket:
-            if k.name == 'reduced_redundancy':
-                assert k.storage_class == 'REDUCED_REDUNDANCY'
-            bucket.delete_key(k)
-        # now delete bucket
-        time.sleep(5)
-        c.delete_bucket(bucket)
-        print '--- tests completed ---'
-
-    def test_basic_anon(self):
-        auth_con = S3Connection()
-        # create a new, empty bucket
-        bucket_name = 'test-%d' % int(time.time())
-        auth_bucket = auth_con.create_bucket(bucket_name)
-
-        # try read the bucket anonymously
-        anon_con = S3Connection(anon=True)
-        anon_bucket = Bucket(anon_con, bucket_name)
-        try:
-            iter(anon_bucket.list()).next()
-            self.fail("anon bucket list should fail")
-        except S3ResponseError:
-            pass
-
-        # give bucket anon user access and anon read again
-        auth_bucket.set_acl('public-read')
-        try:
-            iter(anon_bucket.list()).next()
-            self.fail("not expecting contents")
-        except S3ResponseError, e:
-            self.fail("We should have public-read access, but received "
-                      "an error: %s" % e)
-        except StopIteration:
-            pass
-
-        # cleanup
-        auth_con.delete_bucket(auth_bucket)
-
-    def test_error_code_populated(self):
-        c = S3Connection()
-        try:
-            c.create_bucket('bad$bucket$name')
-        except S3ResponseError, e:
-            self.assertEqual(e.error_code, 'InvalidBucketName')
-        else:
-            self.fail("S3ResponseError not raised.")