gcloud 0.0.4 → 0.0.6

data/packages/gsutil/gslib/commands/update.py

@@ -0,0 +1,305 @@
+# Copyright 2011 Google Inc. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import os
+import platform
+import shutil
+import signal
+import sys
+import tarfile
+import tempfile
+
+from boto import config
+from gslib.command import Command
+from gslib.command import COMMAND_NAME
+from gslib.command import COMMAND_NAME_ALIASES
+from gslib.command import CONFIG_REQUIRED
+from gslib.command import FILE_URIS_OK
+from gslib.command import MAX_ARGS
+from gslib.command import MIN_ARGS
+from gslib.command import PROVIDER_URIS_OK
+from gslib.command import SUPPORTED_SUB_ARGS
+from gslib.command import URIS_START_ARG
+from gslib.exception import CommandException
+from gslib.help_provider import HELP_NAME
+from gslib.help_provider import HELP_NAME_ALIASES
+from gslib.help_provider import HELP_ONE_LINE_SUMMARY
+from gslib.help_provider import HELP_TEXT
+from gslib.help_provider import HelpType
+from gslib.help_provider import HELP_TYPE
+
+_detailed_help_text = ("""
+<B>SYNOPSIS</B>
+gsutil update [-f] [uri]
+
+
+<B>DESCRIPTION</B>
+  The gsutil update command downloads the latest gsutil release, checks its
+  version, and offers to let you update to it if it differs from the version
+  you're currently running.
+
+  Once you say "Y" to the prompt of whether to install the update, the gsutil
+  update command locates where the running copy of gsutil is installed,
+  unpacks the new version into an adjacent directory, moves the previous version
+  aside, moves the new version to where the previous version was installed,
+  and removes the moved-aside old version. Because of this, users are cautioned
+  not to store data in the gsutil directory, since that data will be lost
+  when you update gsutil. (Some users change directories into the gsutil
+  directory to run the command. We advise against doing that, for this reason.)
+
+  By default gsutil update will retrieve the new code from
+  gs://pub/gsutil.tar.gz, but you can optionally specify a URI to use
+  instead. This is primarily used for distributing pre-release versions of
+  the code to a small group of early test users.
+
+
+<B>OPTIONS</B>
+  -f          Forces the update command to offer to let you update, even if you
+              have the most current copy already. This can be useful if you have
+              a corrupted local copy.
+""")
+
+
+class UpdateCommand(Command):
+  """Implementation of gsutil update command."""
+
+  # Command specification (processed by parent class).
+  command_spec = {
+    # Name of command.
+    COMMAND_NAME : 'update',
+    # List of command name aliases.
+    COMMAND_NAME_ALIASES : ['refresh'],
+    # Min number of args required by this command.
+    MIN_ARGS : 0,
+    # Max number of args required by this command, or NO_MAX.
+    MAX_ARGS : 1,
+    # Getopt-style string specifying acceptable sub args.
+    SUPPORTED_SUB_ARGS : 'f',
+    # True if file URIs acceptable for this command.
+    FILE_URIS_OK : False,
+    # True if provider-only URIs acceptable for this command.
+    PROVIDER_URIS_OK : False,
+    # Index in args of first URI arg.
+    URIS_START_ARG : 0,
+    # True if must configure gsutil before running command.
+    CONFIG_REQUIRED : True,
+  }
+  help_spec = {
+    # Name of command or auxiliary help info for which this help applies.
+    HELP_NAME : 'update',
+    # List of help name aliases.
+    HELP_NAME_ALIASES : ['refresh'],
+    # Type of help:
+    HELP_TYPE : HelpType.COMMAND_HELP,
+    # One line summary of this help.
+    HELP_ONE_LINE_SUMMARY : 'Update to the latest gsutil release',
+    # The full help text.
+    HELP_TEXT : _detailed_help_text,
+  }
+
+  def _ExplainIfSudoNeeded(self, tf, dirs_to_remove):
+    """Explains what to do if sudo needed to update gsutil software.
+
+    Happens if gsutil was previously installed by a different user (typically if
+    someone originally installed in a shared file system location, using sudo).
+
+    Args:
+      tf: Opened TarFile.
+      dirs_to_remove: List of directories to remove.
+
+    Raises:
+      CommandException: if errors encountered.
+    """
+    system = platform.system()
+    # If running under Windows we don't need (or have) sudo.
+    if system.lower().startswith('windows'):
+      return
+
+    user_id = os.getuid()
+    if (os.stat(self.gsutil_bin_dir).st_uid == user_id
+        and os.stat(self.boto_lib_dir).st_uid == user_id):
+      return
+
+    # Won't fail - this command runs after main startup code that insists on
+    # having a config file.
+    config_files = ' '.join(self.config_file_list)
+    self._CleanUpUpdateCommand(tf, dirs_to_remove)
+    raise CommandException(
+        ('Since it was installed by a different user previously, you will need '
+         'to update using the following commands.\nYou will be prompted for '
+         'your password, and the install will run as "root". If you\'re unsure '
+         'what this means please ask your system administrator for help:'
+         '\n\tchmod 644 %s\n\tsudo env BOTO_CONFIG=%s gsutil update'
+         '\n\tchmod 600 %s') % (config_files, config_files, config_files),
+        informational=True)
+
+  # This list is checked during gsutil update by doing a lowercased
+  # slash-left-stripped check. For example "/Dev" would match the "dev" entry.
+  unsafe_update_dirs = [
+      'applications', 'auto', 'bin', 'boot', 'desktop', 'dev',
+      'documents and settings', 'etc', 'export', 'home', 'kernel', 'lib',
+      'lib32', 'library', 'lost+found', 'mach_kernel', 'media', 'mnt', 'net',
+      'null', 'network', 'opt', 'private', 'proc', 'program files', 'python',
+      'root', 'sbin', 'scripts', 'srv', 'sys', 'system', 'tmp', 'users', 'usr',
+      'var', 'volumes', 'win', 'win32', 'windows', 'winnt',
+  ]
+
+  def _EnsureDirsSafeForUpdate(self, dirs):
+    """Throws Exception if any of dirs is known to be unsafe for gsutil update.
+
+    This provides a fail-safe check to ensure we don't try to overwrite
+    or delete any important directories. (That shouldn't happen given the
+    way we construct tmp dirs, etc., but since the gsutil update cleanup
+    uses shutil.rmtree() it's prudent to add extra checks.)
+
+    Args:
+      dirs: List of directories to check.
+
+    Raises:
+      CommandException: If unsafe directory encountered.
+    """
+    for d in dirs:
+      if not d:
+        d = 'null'
+      if d.lstrip(os.sep).lower() in self.unsafe_update_dirs:
+        raise CommandException('EnsureDirsSafeForUpdate: encountered unsafe '
+                               'directory (%s); aborting update' % d)
+
+  def _CleanUpUpdateCommand(self, tf, dirs_to_remove):
+    """Cleans up temp files etc. from running update command.
+
+    Args:
+      tf: Opened TarFile.
+      dirs_to_remove: List of directories to remove.
+
+    """
+    tf.close()
+    self._EnsureDirsSafeForUpdate(dirs_to_remove)
+    for directory in dirs_to_remove:
+      try:
+        shutil.rmtree(directory)
+      except OSError as e:
+        # Ignore errors while attempting to remove old dirs under Windows. They
+        # happen because of Windows exclusive file locking, and the update
+        # actually succeeds but just leaves the old versions around in the
+        # user's temp dir.
+        if not platform.system().lower().startswith('windows'):
+          raise
+
+  # Command entry point.
+  def RunCommand(self):
+    for cfg_var in ('is_secure', 'https_validate_certificates'):
+      if (config.has_option('Boto', cfg_var)
+          and not config.getboolean('Boto', cfg_var)):
+        raise CommandException('Your boto configuration has %s = False. '
+                               'The update command\ncannot be run this way, for '
+                               'security reasons.' % cfg_var)
+    dirs_to_remove = []
+    # Retrieve gsutil tarball and check if it's newer than installed code.
+    # TODO: Store this version info as metadata on the tarball object and
+    # change this command's implementation to check that metadata instead of
+    # downloading the tarball to check the version info.
+    tmp_dir = tempfile.mkdtemp()
+    dirs_to_remove.append(tmp_dir)
+    os.chdir(tmp_dir)
+    print 'Checking for software update...'
+    if len(self.args):
+      update_from_uri_str = self.args[0]
+      if not update_from_uri_str.endswith('.tar.gz'):
+        raise CommandException(
+          'The update command only works with tar.gz files.')
+    else:
+      update_from_uri_str = 'gs://pub/gsutil.tar.gz'
+    self.command_runner.RunNamedCommand('cp', [update_from_uri_str,
+                                        'file://gsutil.tar.gz'],
+                                        self.headers, self.debug)
+    # Note: tf is closed in _CleanUpUpdateCommand.
+    tf = tarfile.open('gsutil.tar.gz')
+    tf.errorlevel = 1  # So fatal tarball unpack errors raise exceptions.
+    tf.extract('./gsutil/VERSION')
+
+    ver_file = open('gsutil/VERSION', 'r')
+    try:
+      latest_version_string = ver_file.read().rstrip('\n')
+    finally:
+      ver_file.close()
+
+    force_update = False
+    if self.sub_opts:
+      for o, unused_a in self.sub_opts:
+        if o == '-f':
+          force_update = True
+    if not force_update and self.gsutil_ver == latest_version_string:
+      self._CleanUpUpdateCommand(tf, dirs_to_remove)
+      if len(self.args):
+        raise CommandException('You already have %s installed.' %
+                               update_from_uri_str, informational=True)
+      else:
+        raise CommandException('You already have the latest gsutil release '
+                               'installed.', informational=True)
+
+    print(('This command will update to the "%s" version of\ngsutil at %s') %
+          (latest_version_string, self.gsutil_bin_dir))
+    self._ExplainIfSudoNeeded(tf, dirs_to_remove)
+
+    answer = raw_input('Proceed? [y/N] ')
+    if not answer or answer.lower()[0] != 'y':
+      self._CleanUpUpdateCommand(tf, dirs_to_remove)
+      raise CommandException('Not running update.', informational=True)
+
+    # Ignore keyboard interrupts during the update to reduce the chance someone
+    # hitting ^C leaves gsutil in a broken state.
+    signal.signal(signal.SIGINT, signal.SIG_IGN)
+
+    # self.gsutil_bin_dir lists the path where the code should end up (like
+    # /usr/local/gsutil), which is one level down from the relative path in the
+    # tarball (since the latter creates files in ./gsutil). So, we need to
+    # extract at the parent directory level.
+    gsutil_bin_parent_dir = os.path.dirname(self.gsutil_bin_dir)
+
+    # Extract tarball to a temporary directory in a sibling to gsutil_bin_dir.
+    old_dir = tempfile.mkdtemp(dir=gsutil_bin_parent_dir)
+    new_dir = tempfile.mkdtemp(dir=gsutil_bin_parent_dir)
+    dirs_to_remove.append(old_dir)
+    dirs_to_remove.append(new_dir)
+    self._EnsureDirsSafeForUpdate(dirs_to_remove)
+    try:
+      tf.extractall(path=new_dir)
+    except Exception, e:
+      self._CleanUpUpdateCommand(tf, dirs_to_remove)
+      raise CommandException('Update failed: %s.' % e)
+
+    # For enterprise mode (shared/central) installation, users with
+    # different user/group than the installation user/group must be
+    # able to run gsutil so we need to do some permissions adjustments
+    # here. Since enterprise mode is not not supported for Windows
+    # users, we can skip this step when running on Windows, which
+    # avoids the problem that Windows has no find or xargs command.
+    system = platform.system()
+    if not system.lower().startswith('windows'):
+      # Make all files and dirs in updated area readable by other
+      # and make all directories executable by other. These steps
+      os.system('chmod -R o+r ' + new_dir)
+      os.system('find ' + new_dir + ' -type d | xargs chmod o+x')
+
+      # Make main gsutil script readable and executable by other.
+      os.system('chmod o+rx ' + os.path.join(new_dir, 'gsutil'))
+
+    # Move old installation aside and new into place.
+    os.rename(self.gsutil_bin_dir, old_dir + os.sep + 'old')
+    os.rename(new_dir + os.sep + 'gsutil', self.gsutil_bin_dir)
+    self._CleanUpUpdateCommand(tf, dirs_to_remove)
+    signal.signal(signal.SIGINT, signal.SIG_DFL)
+    print 'Update complete.'
+    return 0

data/packages/gsutil/gslib/commands/version.py

@@ -0,0 +1,150 @@
+# Copyright 2011 Google Inc. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import boto
+import os
+import re
+import sys
+
+from boto.pyami.config import BotoConfigLocations
+from gslib.command import Command
+from gslib.command import COMMAND_NAME
+from gslib.command import COMMAND_NAME_ALIASES
+from gslib.command import CONFIG_REQUIRED
+from gslib.command import FILE_URIS_OK
+from gslib.command import MAX_ARGS
+from gslib.command import MIN_ARGS
+from gslib.command import PROVIDER_URIS_OK
+from gslib.command import SUPPORTED_SUB_ARGS
+from gslib.command import URIS_START_ARG
+from gslib.help_provider import HELP_NAME
+from gslib.help_provider import HELP_NAME_ALIASES
+from gslib.help_provider import HELP_ONE_LINE_SUMMARY
+from gslib.help_provider import HELP_TEXT
+from gslib.help_provider import HelpType
+from gslib.help_provider import HELP_TYPE
+from hashlib import md5
+
+_detailed_help_text = ("""
+<B>SYNOPSIS</B>
+  gsutil version
+
+
+<B>DESCRIPTION</B>
+  Prints information about the version of gsutil, boto, and Python being
+  run on your system.
+""")
+
+
+class VersionCommand(Command):
+  """Implementation of gsutil version command."""
+
+  # Command specification (processed by parent class).
+  command_spec = {
+    # Name of command.
+    COMMAND_NAME : 'version',
+    # List of command name aliases.
+    COMMAND_NAME_ALIASES : ['ver'],
+    # Min number of args required by this command.
+    MIN_ARGS : 0,
+    # Max number of args required by this command, or NO_MAX.
+    MAX_ARGS : 0,
+    # Getopt-style string specifying acceptable sub args.
+    SUPPORTED_SUB_ARGS : '',
+    # True if file URIs acceptable for this command.
+    FILE_URIS_OK : False,
+    # True if provider-only URIs acceptable for this command.
+    PROVIDER_URIS_OK : False,
+    # Index in args of first URI arg.
+    URIS_START_ARG : 0,
+    # True if must configure gsutil before running command.
+    CONFIG_REQUIRED : False,
+  }
+  help_spec = {
+    # Name of command or auxiliary help info for which this help applies.
+    HELP_NAME : 'version',
+    # List of help name aliases.
+    HELP_NAME_ALIASES : ['ver'],
+    # Type of help:
+    HELP_TYPE : HelpType.COMMAND_HELP,
+    # One line summary of this help.
+    HELP_ONE_LINE_SUMMARY : 'Print version info about gsutil',
+    # The full help text.
+    HELP_TEXT : _detailed_help_text,
+  }
+
+  # Command entry point.
+  def RunCommand(self):
+    for path in BotoConfigLocations:
+      f = None
+      try:
+        f = open(path, 'r')
+        break
+      except IOError:
+        pass
+      finally:
+        if f:
+          f.close()
+        else:
+          path = "no config found"
+
+    try:
+      f = open(os.path.join(self.gsutil_bin_dir, 'CHECKSUM'))
+      shipped_checksum = f.read().strip()
+      f.close()
+    except IOError:
+      shipped_checksum = 'MISSING'
+    try:
+      cur_checksum = self._ComputeCodeChecksum()
+    except IOError:
+      cur_checksum = 'MISSING FILES'
+    if shipped_checksum == cur_checksum:
+      checksum_ok_str = 'OK'
+    else:
+      checksum_ok_str = '!= %s' % shipped_checksum
+    sys.stderr.write(
+        'gsutil version %s\nchecksum %s (%s)\n'
+        'boto version %s\npython version %s\n'
+        'config path: %s\ngsutil path: %s\n' % (
+        self.gsutil_ver, cur_checksum, checksum_ok_str,
+        boto.__version__, sys.version, path, os.path.realpath(sys.argv[0])))
+
+    return 0
+
+  def _ComputeCodeChecksum(self):
+    """
+    Computes a checksum of gsutil code so we can see if users locally modified
+    gsutil when requesting support. (It's fine for users to make local mods,
+    but when users ask for support we ask them to run a stock version of
+    gsutil so we can reduce possible variables.)
+    """
+    m = md5()
+    # Checksum gsutil and all .py files under gsutil bin (including bundled
+    # libs). Although we will eventually make gsutil allow use of a centrally
+    # installed boto (once boto shifts to more frequent releases), in that case
+    # the local copies still should not have any user modifications.
+    files_to_checksum = [os.path.join(self.gsutil_bin_dir, 'gsutil')]
+    for root, sub_folders, files in os.walk(self.gsutil_bin_dir):
+      for file in files:
+        if file[-3:] == '.py':
+          files_to_checksum.append(os.path.join(root, file))
+    # Sort to ensure consistent checksum build, no matter how os.walk
+    # orders the list.
+    for file in sorted(files_to_checksum):
+      f = open(file, 'r')
+      content = f.read()
+      content = re.sub(r'(\r\n|\r|\n)', '\n', content)
+      m.update(content)
+      f.close()
+    return m.hexdigest()