fluentd 1.14.4-x64-mingw-ucrt

data/lib/fluent/plugin/parser_syslog.rb

@@ -0,0 +1,496 @@
+#
+# Fluentd
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+require 'fluent/plugin/parser'
+
+require 'fluent/time'
+
+module Fluent
+  module Plugin
+    class SyslogParser < Parser
+      Plugin.register_parser('syslog', self)
+
+      # TODO: Remove them since these regexps are no longer needed. but keep them for compatibility for now
+      # From existence TextParser pattern
+      REGEXP = /^(?<time>[^ ]*\s*[^ ]* [^ ]*) (?<host>[^ ]*) (?<ident>[^ :\[]*)(?:\[(?<pid>[0-9]+)\])?(?:[^\:]*\:)? *(?<message>.*)$/
+      # From in_syslog default pattern
+      REGEXP_WITH_PRI = /^\<(?<pri>[0-9]+)\>(?<time>[^ ]* {1,2}[^ ]* [^ ]*) (?<host>[^ ]*) (?<ident>[^ :\[]*)(?:\[(?<pid>[0-9]+)\])?(?:[^\:]*\:)? *(?<message>.*)$/
+      REGEXP_RFC5424 = <<~'EOS'.chomp
+        (?<time>[^ ]+) (?<host>[!-~]{1,255}) (?<ident>[!-~]{1,48}) (?<pid>[!-~]{1,128}) (?<msgid>[!-~]{1,32}) (?<extradata>(?:\-|(?:\[.*?(?<!\\)\])+))(?: (?<message>.+))?
+      EOS
+      REGEXP_RFC5424_NO_PRI = Regexp.new(<<~'EOS'.chomp % REGEXP_RFC5424, Regexp::MULTILINE)
+        \A%s\z
+      EOS
+      REGEXP_RFC5424_WITH_PRI = Regexp.new(<<~'EOS'.chomp % REGEXP_RFC5424, Regexp::MULTILINE)
+        \A<(?<pri>[0-9]{1,3})\>[1-9]\d{0,2} %s\z
+      EOS
+
+      REGEXP_DETECT_RFC5424 = /^\<[0-9]{1,3}\>[1-9]\d{0,2}/
+
+      RFC3164_WITHOUT_TIME_AND_PRI_REGEXP = /(?<host>[^ ]*) (?<ident>[^ :\[]*)(?:\[(?<pid>[0-9]+)\])?(?:[^\:]*\:)? *(?<message>.*)$/
+      RFC3164_CAPTURES = RFC3164_WITHOUT_TIME_AND_PRI_REGEXP.names.freeze
+      RFC3164_PRI_REGEXP = /^<(?<pri>[0-9]{1,3})>/
+
+      RFC5424_WITHOUT_TIME_AND_PRI_REGEXP = /(?<host>[!-~]{1,255}) (?<ident>[!-~]{1,48}) (?<pid>[!-~]{1,128}) (?<msgid>[!-~]{1,32}) (?<extradata>(?:\-|(?:\[.*?(?<!\\)\])+))(?: (?<message>.+))?\z/m
+      RFC5424_CAPTURES = RFC5424_WITHOUT_TIME_AND_PRI_REGEXP.names.freeze
+      RFC5424_PRI_REGEXP = /^<(?<pri>\d{1,3})>\d\d{0,2}\s/
+
+      config_set_default :time_format, "%b %d %H:%M:%S"
+      desc 'If the incoming logs have priority prefix, e.g. <9>, set true'
+      config_param :with_priority, :bool, default: false
+      desc 'Specify protocol format'
+      config_param :message_format, :enum, list: [:rfc3164, :rfc5424, :auto], default: :rfc3164
+      desc 'Specify time format for event time for rfc5424 protocol'
+      config_param :rfc5424_time_format, :string, default: "%Y-%m-%dT%H:%M:%S.%L%z"
+      desc 'The parser type used to parse syslog message'
+      config_param :parser_engine, :enum, list: [:regexp, :string], default: :regexp, alias: :parser_type
+      desc 'support colonless ident in string parser'
+      config_param :support_colonless_ident, :bool, default: true
+
+      def initialize
+        super
+        @mutex = Mutex.new
+        @regexp = nil
+        @regexp3164 = nil
+        @regexp5424 = nil
+        @regexp_parser = nil
+        @time_parser_rfc3164 = nil
+        @time_parser_rfc5424 = nil
+        @space_count_rfc3164 = nil
+        @space_count_rfc5424 = nil
+        @skip_space_count_rfc3164 = false
+        @skip_space_count_rfc5424 = false
+        @time_parser_rfc5424_without_subseconds = nil
+      end
+
+      def configure(conf)
+        super
+
+        @regexp_parser = @parser_engine == :regexp
+        @regexp = case @message_format
+                  when :rfc3164
+                    if @regexp_parser
+                      class << self
+                        alias_method :parse, :parse_rfc3164_regex
+                      end
+                    else
+                      class << self
+                        alias_method :parse, :parse_rfc3164
+                      end
+                    end
+                    setup_time_parser_3164(@time_format)
+                    RFC3164_WITHOUT_TIME_AND_PRI_REGEXP
+                  when :rfc5424
+                    if @regexp_parser
+                      class << self
+                        alias_method :parse, :parse_rfc5424_regex
+                      end
+                    else
+                      class << self
+                        alias_method :parse, :parse_rfc5424
+                      end
+                    end
+                    @time_format = @rfc5424_time_format unless conf.has_key?('time_format')
+                    setup_time_parser_5424(@time_format)
+                    RFC5424_WITHOUT_TIME_AND_PRI_REGEXP
+                  when :auto
+                    class << self
+                      alias_method :parse, :parse_auto
+                    end
+                    setup_time_parser_3164(@time_format)
+                    setup_time_parser_5424(@rfc5424_time_format)
+                    nil
+                  end
+
+        if @regexp_parser
+          @regexp3164 = RFC3164_WITHOUT_TIME_AND_PRI_REGEXP
+          @regexp5424 = RFC5424_WITHOUT_TIME_AND_PRI_REGEXP
+        end
+      end
+
+      def setup_time_parser_3164(time_fmt)
+        @time_parser_rfc3164 = time_parser_create(format: time_fmt)
+        if ['%b %d %H:%M:%S', '%b %d %H:%M:%S.%N'].include?(time_fmt)
+          @skip_space_count_rfc3164 = true
+        end
+        @space_count_rfc3164 = time_fmt.squeeze(' ').count(' ') + 1
+      end
+
+      def setup_time_parser_5424(time_fmt)
+        @time_parser_rfc5424 = time_parser_create(format: time_fmt)
+        @time_parser_rfc5424_without_subseconds = time_parser_create(format: "%Y-%m-%dT%H:%M:%S%z")
+        @skip_space_count_rfc5424 = time_fmt.count(' ').zero?
+        @space_count_rfc5424 = time_fmt.squeeze(' ').count(' ') + 1
+      end
+
+      # this method is for tests
+      def patterns
+        {'format' => @regexp, 'time_format' => @time_format}
+      end
+
+      def parse(text)
+        # This is overwritten in configure
+      end
+
+      def parse_auto(text, &block)
+        if REGEXP_DETECT_RFC5424.match?(text)
+          if @regexp_parser
+            parse_rfc5424_regex(text, &block)
+          else
+            parse_rfc5424(text, &block)
+          end
+        else
+          if @regexp_parser
+            parse_rfc3164_regex(text, &block)
+          else
+            parse_rfc3164(text, &block)
+          end
+        end
+      end
+
+      SPLIT_CHAR = ' '.freeze
+
+      def parse_rfc3164_regex(text, &block)
+        idx = 0
+        record = {}
+
+        if @with_priority
+          if RFC3164_PRI_REGEXP.match?(text)
+            v = text.index('>')
+            record['pri'] = text[1..v].to_i # trim `<` and ``>
+            idx = v + 1
+          else
+            yield(nil, nil)
+            return
+          end
+        end
+
+        i = idx - 1
+        sq = false
+        @space_count_rfc3164.times do
+          while text[i + 1] == SPLIT_CHAR
+            sq = true
+            i += 1
+          end
+
+          i = text.index(SPLIT_CHAR, i + 1)
+        end
+
+        time_str = sq ? text.slice(idx, i - idx).squeeze(SPLIT_CHAR) : text.slice(idx, i - idx)
+        time = @mutex.synchronize { @time_parser_rfc3164.parse(time_str) }
+        if @keep_time_key
+          record['time'] = time_str
+        end
+
+        parse_plain(@regexp3164, time, text, i + 1, record, RFC3164_CAPTURES, &block)
+      end
+
+      def parse_rfc5424_regex(text, &block)
+        idx = 0
+        record = {}
+
+        if @with_priority
+          if (m = RFC5424_PRI_REGEXP.match(text))
+            record['pri'] = m['pri'].to_i
+            idx = m.end(0)
+          else
+            yield(nil, nil)
+            return
+          end
+        end
+
+        i = idx - 1
+        sq = false
+        @space_count_rfc5424.times {
+          while text[i + 1] == SPLIT_CHAR
+            sq = true
+            i += 1
+          end
+
+          i = text.index(SPLIT_CHAR, i + 1)
+        }
+
+        time_str = sq ? text.slice(idx, i - idx).squeeze(SPLIT_CHAR) : text.slice(idx, i - idx)
+        time = @mutex.synchronize do
+          begin
+            @time_parser_rfc5424.parse(time_str)
+          rescue Fluent::TimeParser::TimeParseError => e
+            log.trace(e)
+            @time_parser_rfc5424_without_subseconds.parse(time_str)
+          end
+        end
+
+        if @keep_time_key
+          record['time'] = time_str
+        end
+        parse_plain(@regexp5424, time, text, i + 1, record, RFC5424_CAPTURES, &block)
+      end
+
+      # @param time [EventTime]
+      # @param idx [Integer] note: this argument is needed to avoid string creation
+      # @param record [Hash]
+      # @param capture_list [Array] for performance
+      def parse_plain(re, time, text, idx, record, capture_list, &block)
+        m = re.match(text, idx)
+        if m.nil?
+          yield nil, nil
+          return
+        end
+
+        capture_list.each { |name|
+          if value = (m[name] rescue nil)
+            case name
+            when "message"
+              value.chomp!
+              record[name] = value
+            else
+              record[name] = value
+            end
+          end
+        }
+
+        if @estimate_current_event
+          time ||= Fluent::EventTime.now
+        end
+
+        yield time, record
+      end
+
+      def parse_rfc3164(text, &block)
+        pri = nil
+        cursor = 0
+        if @with_priority
+          if text.start_with?('<'.freeze)
+            i = text.index('>'.freeze, 1)
+            if i < 2
+              yield nil, nil
+              return
+            end
+            pri = text.slice(1, i - 1).to_i
+            cursor = i + 1
+          else
+            yield nil, nil
+            return
+          end
+        end
+
+        if @skip_space_count_rfc3164
+          # header part
+          time_size = 15 # skip Mmm dd hh:mm:ss
+          time_end = text[cursor + time_size]
+          if time_end == SPLIT_CHAR
+            time_str = text.slice(cursor, time_size)
+            cursor += 16 # time + ' '
+          elsif time_end == '.'.freeze
+            # support subsecond time
+            i = text.index(SPLIT_CHAR, time_size)
+            time_str = text.slice(cursor, i - cursor)
+            cursor = i + 1
+          else
+            yield nil, nil
+            return
+          end
+        else
+          i = cursor - 1
+          sq = false
+          @space_count_rfc3164.times do
+            while text[i + 1] == SPLIT_CHAR
+              sq = true
+              i += 1
+            end
+            i = text.index(SPLIT_CHAR, i + 1)
+          end
+
+          time_str = sq ? text.slice(idx, i - cursor).squeeze(SPLIT_CHAR) : text.slice(cursor, i - cursor)
+          cursor = i + 1
+        end
+
+        i = text.index(SPLIT_CHAR, cursor)
+        if i.nil?
+          yield nil, nil
+          return
+        end
+        host_size = i - cursor
+        host = text.slice(cursor, host_size)
+        cursor += host_size + 1
+
+        record = {'host' => host}
+        record['pri'] = pri if pri
+
+        i = text.index(SPLIT_CHAR, cursor)
+
+        # message part
+        msg = if i.nil?  # for 'only non-space content case'
+                text.slice(cursor, text.bytesize)
+              else
+                if text[i - 1] == ':'.freeze
+                  if text[i - 2] == ']'.freeze
+                    left_braket_pos = text.index('['.freeze, cursor)
+                    record['ident'] = text.slice(cursor, left_braket_pos - cursor)
+                    record['pid'] = text.slice(left_braket_pos + 1, i - left_braket_pos - 3) # remove '[' / ']:'
+                  else
+                    record['ident'] = text.slice(cursor, i - cursor - 1)
+                  end
+                  text.slice(i + 1, text.bytesize)
+                else
+                  if @support_colonless_ident
+                    if text[i - 1] == ']'.freeze
+                      left_braket_pos = text.index('['.freeze, cursor)
+                      record['ident'] = text.slice(cursor, left_braket_pos - cursor)
+                      record['pid'] = text.slice(left_braket_pos + 1, i - left_braket_pos - 2) # remove '[' / ']'
+                    else
+                      record['ident'] = text.slice(cursor, i - cursor)
+                    end
+                    text.slice(i + 1, text.bytesize)
+                  else
+                    text.slice(cursor, text.bytesize)
+                  end
+                end
+              end
+        msg.chomp!
+        record['message'] = msg
+
+        time = @time_parser_rfc3164.parse(time_str)
+        record['time'] = time_str if @keep_time_key
+
+        yield time, record
+      end
+
+      NILVALUE = '-'.freeze
+
+      def parse_rfc5424(text, &block)
+        pri = nil
+        cursor = 0
+        if @with_priority
+          if text.start_with?('<'.freeze)
+            i = text.index('>'.freeze, 1)
+            if i < 2
+              yield nil, nil
+              return
+            end
+            pri = text.slice(1, i - 1).to_i
+            i = text.index(SPLIT_CHAR, i)
+            cursor = i + 1
+          else
+            yield nil, nil
+            return
+          end
+        end
+
+        # timestamp part
+        if @skip_space_count_rfc5424
+          i = text.index(SPLIT_CHAR, cursor)
+          time_str = text.slice(cursor, i - cursor)
+          cursor = i + 1
+        else
+          i = cursor - 1
+          sq = false
+          @space_count_rfc5424.times do
+            while text[i + 1] == SPLIT_CHAR
+              sq = true
+              i += 1
+            end
+            i = text.index(SPLIT_CHAR, i + 1)
+          end
+
+          time_str = sq ? text.slice(idx, i - cursor).squeeze(SPLIT_CHAR) : text.slice(cursor, i - cursor)
+          cursor = i + 1
+        end
+
+        # Repeat same code for the performance
+
+        # host part
+        i = text.index(SPLIT_CHAR, cursor)
+        unless i
+          yield nil, nil
+          return
+        end
+        slice_size = i - cursor
+        host = text.slice(cursor, slice_size)
+        cursor += slice_size + 1
+
+        # ident part
+        i = text.index(SPLIT_CHAR, cursor)
+        unless i
+          yield nil, nil
+          return
+        end
+        slice_size = i - cursor
+        ident = text.slice(cursor, slice_size)
+        cursor += slice_size + 1
+
+        # pid part
+        i = text.index(SPLIT_CHAR, cursor)
+        unless i
+          yield nil, nil
+          return
+        end
+        slice_size = i - cursor
+        pid = text.slice(cursor, slice_size)
+        cursor += slice_size + 1
+
+        # msgid part
+        i = text.index(SPLIT_CHAR, cursor)
+        unless i
+          yield nil, nil
+          return
+        end
+        slice_size = i - cursor
+        msgid = text.slice(cursor, slice_size)
+        cursor += slice_size + 1
+
+        record = {'host' => host, 'ident' => ident, 'pid' => pid, 'msgid' => msgid}
+        record['pri'] = pri if pri
+
+        # extradata part
+        ed_start = text[cursor]
+        if ed_start == NILVALUE
+          record['extradata'] = NILVALUE
+          cursor += 1
+        else
+          start = cursor
+          i = text.index('] '.freeze, cursor)
+          extradata = if i
+                        diff = i + 1 - start # calculate ']' position
+                        cursor += diff
+                        text.slice(start, diff)
+                      else  # No message part case
+                        cursor = text.bytesize
+                        text.slice(start, cursor)
+                      end
+          extradata.tr!("\\".freeze, ''.freeze)
+          record['extradata'] = extradata
+        end
+
+        # message part
+        if cursor != text.bytesize
+          msg = text.slice(cursor + 1, text.bytesize)
+          msg.chomp!
+          record['message'] = msg
+        end
+
+        time = begin
+                 @time_parser_rfc5424.parse(time_str)
+               rescue Fluent::TimeParser::TimeParseError => e
+                 @time_parser_rfc5424_without_subseconds.parse(time_str)
+               end
+        record['time'] = time_str if @keep_time_key
+
+        yield time, record
+      end
+    end
+  end
+end

data/lib/fluent/plugin/parser_tsv.rb

@@ -0,0 +1,42 @@
+#
+# Fluentd
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+require 'fluent/plugin/parser'
+
+module Fluent
+  module Plugin
+    class TSVParser < Parser
+      Plugin.register_parser('tsv', self)
+
+      desc 'Names of fields included in each lines'
+      config_param :keys, :array, value_type: :string
+      desc 'The delimiter character (or string) of TSV values'
+      config_param :delimiter, :string, default: "\t"
+
+      def configure(conf)
+        super
+        @key_num = @keys.length
+      end
+
+      def parse(text)
+        values = text.split(@delimiter, @key_num)
+        r = Hash[@keys.zip(values)]
+        time, record = convert_values(parse_time(r), r)
+        yield time, record
+      end
+    end
+  end
+end

data/lib/fluent/plugin/sd_file.rb

@@ -0,0 +1,156 @@
+#
+# Fluentd
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+require 'cool.io'
+
+require 'fluent/plugin_helper'
+require 'fluent/plugin/service_discovery'
+
+module Fluent
+  module Plugin
+    class FileServiceDiscovery < ServiceDiscovery
+      include PluginHelper::Mixin
+
+      Plugin.register_sd('file', self)
+
+      DEFAULT_FILE_TYPE = :yaml
+      DEFAUT_WEIGHT = 60
+      DEFAULT_SD_FILE_PATH = ENV['DEFAULT_SD_FILE_PATH'] || '/etc/fluent/sd.yaml'
+
+      helpers :event_loop
+
+      config_param :path, :string, default: DEFAULT_SD_FILE_PATH
+      config_param :conf_encoding, :string, default: 'utf-8'
+
+      def initialize
+        super
+
+        @file_type = nil
+      end
+
+      def configure(conf)
+        super
+
+        unless File.exist?(@path)
+          raise Fluent::ConfigError, "sd_file: path=#{@path} not found"
+        end
+
+        @file_type = File.basename(@path).split('.', 2).last.to_sym
+        unless %i[yaml yml json].include?(@file_type)
+          @file_type = DEFAULT_FILE_TYPE
+        end
+
+        @services = fetch_server_info
+      end
+
+      def start(queue)
+        watcher = StatWatcher.new(@path, @log) do |_prev, _cur|
+          refresh_file(queue)
+        end
+        event_loop_attach(watcher)
+
+        super()
+      end
+
+      private
+
+      def parser
+        @parser ||=
+          case @file_type
+          when :yaml, :yml
+            require 'yaml'
+            -> (v) { YAML.safe_load(v).map }
+          when :json
+            require 'json'
+            -> (v) { JSON.parse(v) }
+          end
+      end
+
+      def refresh_file(queue)
+        s =
+          begin
+            fetch_server_info
+          rescue => e
+            @log.error("sd_file: #{e}")
+            return
+          end
+
+        if s.nil?
+          # if any error occurs, skip this turn
+          return
+        end
+
+        diff = []
+        join = s - @services
+        # Need service_in first to guarantee that server exist at least one all time.
+        join.each do |j|
+          diff << ServiceDiscovery.service_in_msg(j)
+        end
+
+        drain = @services - s
+        drain.each do |d|
+          diff << ServiceDiscovery.service_out_msg(d)
+        end
+
+        @services = s
+
+        diff.each do |a|
+          queue.push(a)
+        end
+      end
+
+      def fetch_server_info
+        config_data =
+          begin
+            File.open(@path, "r:#{@conf_encoding}:utf-8", &:read)
+          rescue => e
+            raise Fluent::ConfigError, "sd_file: path=#{@path} couldn't open #{e}"
+          end
+
+        parser.call(config_data).map do |s|
+          Service.new(
+            :file,
+            s.fetch('host'),
+            s.fetch('port'),
+            s['name'],
+            s.fetch('weight', DEFAUT_WEIGHT),
+            s['standby'],
+            s['username'],
+            s['password'],
+            s['shared_key'],
+          )
+        end
+      rescue KeyError => e
+        raise Fluent::ConfigError, "#{e}. Service must have `host` and `port`"
+      end
+
+      class StatWatcher < Coolio::StatWatcher
+        def initialize(path, log, &callback)
+          @path = path
+          @log = log
+          @callback = callback
+          super(@path)
+        end
+
+        def on_change(prev_stat, cur_stat)
+          @callback.call(prev_stat, cur_stat)
+        rescue => e
+          @log.error(e)
+        end
+      end
+    end
+  end
+end