ffi 1.9.18 → 1.9.23

data/ext/ffi_c/libffi/src/x86/darwin64.S

@@ -1,416 +0,0 @@
-/* -----------------------------------------------------------------------
-   darwin64.S - Copyright (c) 2006 Free Software Foundation, Inc.
-	        Copyright (c) 2008 Red Hat, Inc.
-   derived from unix64.S
-
-   x86-64 Foreign Function Interface for Darwin.
-
-   Permission is hereby granted, free of charge, to any person obtaining
-   a copy of this software and associated documentation files (the
-   ``Software''), to deal in the Software without restriction, including
-   without limitation the rights to use, copy, modify, merge, publish,
-   distribute, sublicense, and/or sell copies of the Software, and to
-   permit persons to whom the Software is furnished to do so, subject to
-   the following conditions:
-
-   The above copyright notice and this permission notice shall be included
-   in all copies or substantial portions of the Software.
-
-   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS
-   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-   IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR
-   OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-   ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-   OTHER DEALINGS IN THE SOFTWARE.
-   ----------------------------------------------------------------------- */
-
-#ifdef __x86_64__
-#define LIBFFI_ASM
-#include <fficonfig.h>
-#include <ffi.h>
-
-	.file "darwin64.S"
-.text
-
-/* ffi_call_unix64 (void *args, unsigned long bytes, unsigned flags,
-		    void *raddr, void (*fnaddr)(void));
-
-   Bit o trickiness here -- ARGS+BYTES is the base of the stack frame
-   for this function.  This has been allocated by ffi_call.  We also
-   deallocate some of the stack that has been alloca'd.  */
-
-	.align	3
-	.globl	_ffi_call_unix64
-
-_ffi_call_unix64:
-LUW0:
-	movq	(%rsp), %r10		/* Load return address.  */
-	leaq	(%rdi, %rsi), %rax	/* Find local stack base.  */
-	movq	%rdx, (%rax)		/* Save flags.  */
-	movq	%rcx, 8(%rax)		/* Save raddr.  */
-	movq	%rbp, 16(%rax)		/* Save old frame pointer.  */
-	movq	%r10, 24(%rax)		/* Relocate return address.  */
-	movq	%rax, %rbp		/* Finalize local stack frame.  */
-LUW1:
-	movq	%rdi, %r10		/* Save a copy of the register area. */
-	movq	%r8, %r11		/* Save a copy of the target fn.  */
-	movl	%r9d, %eax		/* Set number of SSE registers.  */
-
-	/* Load up all argument registers.  */
-	movq	(%r10), %rdi
-	movq	8(%r10), %rsi
-	movq	16(%r10), %rdx
-	movq	24(%r10), %rcx
-	movq	32(%r10), %r8
-	movq	40(%r10), %r9
-	testl	%eax, %eax
-	jnz	Lload_sse
-Lret_from_load_sse:
-
-	/* Deallocate the reg arg area.  */
-	leaq	176(%r10), %rsp
-
-	/* Call the user function.  */
-	call	*%r11
-
-	/* Deallocate stack arg area; local stack frame in redzone.  */
-	leaq	24(%rbp), %rsp
-
-	movq	0(%rbp), %rcx		/* Reload flags.  */
-	movq	8(%rbp), %rdi		/* Reload raddr.  */
-	movq	16(%rbp), %rbp		/* Reload old frame pointer.  */
-LUW2:
-
-	/* The first byte of the flags contains the FFI_TYPE.  */
-	movzbl	%cl, %r10d
-	leaq	Lstore_table(%rip), %r11
-	movslq	(%r11, %r10, 4), %r10
-	addq	%r11, %r10
-	jmp	*%r10
-
-Lstore_table:
-	.long	Lst_void-Lstore_table		/* FFI_TYPE_VOID */
-	.long	Lst_sint32-Lstore_table		/* FFI_TYPE_INT */
-	.long	Lst_float-Lstore_table		/* FFI_TYPE_FLOAT */
-	.long	Lst_double-Lstore_table		/* FFI_TYPE_DOUBLE */
-	.long	Lst_ldouble-Lstore_table	/* FFI_TYPE_LONGDOUBLE */
-	.long	Lst_uint8-Lstore_table		/* FFI_TYPE_UINT8 */
-	.long	Lst_sint8-Lstore_table		/* FFI_TYPE_SINT8 */
-	.long	Lst_uint16-Lstore_table		/* FFI_TYPE_UINT16 */
-	.long	Lst_sint16-Lstore_table		/* FFI_TYPE_SINT16 */
-	.long	Lst_uint32-Lstore_table		/* FFI_TYPE_UINT32 */
-	.long	Lst_sint32-Lstore_table		/* FFI_TYPE_SINT32 */
-	.long	Lst_int64-Lstore_table		/* FFI_TYPE_UINT64 */
-	.long	Lst_int64-Lstore_table		/* FFI_TYPE_SINT64 */
-	.long	Lst_struct-Lstore_table		/* FFI_TYPE_STRUCT */
-	.long	Lst_int64-Lstore_table		/* FFI_TYPE_POINTER */
-
-	.text
-	.align	3
-Lst_void:
-	ret
-	.align	3
-Lst_uint8:
-	movzbq	%al, %rax
-	movq	%rax, (%rdi)
-	ret
-	.align	3
-Lst_sint8:
-	movsbq	%al, %rax
-	movq	%rax, (%rdi)
-	ret
-	.align	3
-Lst_uint16:
-	movzwq	%ax, %rax
-	movq	%rax, (%rdi)
-	.align	3
-Lst_sint16:
-	movswq	%ax, %rax
-	movq	%rax, (%rdi)
-	ret
-	.align	3
-Lst_uint32:
-	movl	%eax, %eax
-	movq	%rax, (%rdi)
-	.align	3
-Lst_sint32:
-	cltq
-	movq	%rax, (%rdi)
-	ret
-	.align	3
-Lst_int64:
-	movq	%rax, (%rdi)
-	ret
-	.align	3
-Lst_float:
-	movss	%xmm0, (%rdi)
-	ret
-	.align	3
-Lst_double:
-	movsd	%xmm0, (%rdi)
-	ret
-Lst_ldouble:
-	fstpt	(%rdi)
-	ret
-	.align	3
-Lst_struct:
-	leaq	-20(%rsp), %rsi		/* Scratch area in redzone.  */
-
-	/* We have to locate the values now, and since we don't want to
-	   write too much data into the user's return value, we spill the
-	   value to a 16 byte scratch area first.  Bits 8, 9, and 10
-	   control where the values are located.  Only one of the three
-	   bits will be set; see ffi_prep_cif_machdep for the pattern.  */
-	movd	%xmm0, %r10
-	movd	%xmm1, %r11
-	testl	$0x100, %ecx
-	cmovnz	%rax, %rdx
-	cmovnz	%r10, %rax
-	testl	$0x200, %ecx
-	cmovnz	%r10, %rdx
-	testl	$0x400, %ecx
-	cmovnz	%r10, %rax
-	cmovnz	%r11, %rdx
-	movq	%rax, (%rsi)
-	movq	%rdx, 8(%rsi)
-
-	/* Bits 12-31 contain the true size of the structure.  Copy from
-	   the scratch area to the true destination.  */
-	shrl	$12, %ecx
-	rep movsb
-	ret
-
-	/* Many times we can avoid loading any SSE registers at all.
-	   It's not worth an indirect jump to load the exact set of
-	   SSE registers needed; zero or all is a good compromise.  */
-	.align	3
-LUW3:
-Lload_sse:
-	movdqa	48(%r10), %xmm0
-	movdqa	64(%r10), %xmm1
-	movdqa	80(%r10), %xmm2
-	movdqa	96(%r10), %xmm3
-	movdqa	112(%r10), %xmm4
-	movdqa	128(%r10), %xmm5
-	movdqa	144(%r10), %xmm6
-	movdqa	160(%r10), %xmm7
-	jmp	Lret_from_load_sse
-
-LUW4:
-	.align	3
-	.globl	_ffi_closure_unix64
-
-_ffi_closure_unix64:
-LUW5:
-	/* The carry flag is set by the trampoline iff SSE registers
-	   are used.  Don't clobber it before the branch instruction.  */
-	leaq    -200(%rsp), %rsp
-LUW6:
-	movq	%rdi, (%rsp)
-	movq    %rsi, 8(%rsp)
-	movq    %rdx, 16(%rsp)
-	movq    %rcx, 24(%rsp)
-	movq    %r8, 32(%rsp)
-	movq    %r9, 40(%rsp)
-	jc      Lsave_sse
-Lret_from_save_sse:
-
-	movq	%r10, %rdi
-	leaq	176(%rsp), %rsi
-	movq	%rsp, %rdx
-	leaq	208(%rsp), %rcx
-	call	_ffi_closure_unix64_inner
-
-	/* Deallocate stack frame early; return value is now in redzone.  */
-	addq	$200, %rsp
-LUW7:
-
-	/* The first byte of the return value contains the FFI_TYPE.  */
-	movzbl	%al, %r10d
-	leaq	Lload_table(%rip), %r11
-	movslq	(%r11, %r10, 4), %r10
-	addq	%r11, %r10
-	jmp	*%r10
-
-Lload_table:
-	.long	Lld_void-Lload_table		/* FFI_TYPE_VOID */
-	.long	Lld_int32-Lload_table		/* FFI_TYPE_INT */
-	.long	Lld_float-Lload_table		/* FFI_TYPE_FLOAT */
-	.long	Lld_double-Lload_table		/* FFI_TYPE_DOUBLE */
-	.long	Lld_ldouble-Lload_table		/* FFI_TYPE_LONGDOUBLE */
-	.long	Lld_int8-Lload_table		/* FFI_TYPE_UINT8 */
-	.long	Lld_int8-Lload_table		/* FFI_TYPE_SINT8 */
-	.long	Lld_int16-Lload_table		/* FFI_TYPE_UINT16 */
-	.long	Lld_int16-Lload_table		/* FFI_TYPE_SINT16 */
-	.long	Lld_int32-Lload_table		/* FFI_TYPE_UINT32 */
-	.long	Lld_int32-Lload_table		/* FFI_TYPE_SINT32 */
-	.long	Lld_int64-Lload_table		/* FFI_TYPE_UINT64 */
-	.long	Lld_int64-Lload_table		/* FFI_TYPE_SINT64 */
-	.long	Lld_struct-Lload_table		/* FFI_TYPE_STRUCT */
-	.long	Lld_int64-Lload_table		/* FFI_TYPE_POINTER */
-
-	.text
-	.align	3
-Lld_void:
-	ret
-	.align	3
-Lld_int8:
-	movzbl	-24(%rsp), %eax
-	ret
-	.align	3
-Lld_int16:
-	movzwl	-24(%rsp), %eax
-	ret
-	.align	3
-Lld_int32:
-	movl	-24(%rsp), %eax
-	ret
-	.align	3
-Lld_int64:
-	movq	-24(%rsp), %rax
-	ret
-	.align	3
-Lld_float:
-	movss	-24(%rsp), %xmm0
-	ret
-	.align	3
-Lld_double:
-	movsd	-24(%rsp), %xmm0
-	ret
-	.align	3
-Lld_ldouble:
-	fldt	-24(%rsp)
-	ret
-	.align	3
-Lld_struct:
-	/* There are four possibilities here, %rax/%rdx, %xmm0/%rax,
-	   %rax/%xmm0, %xmm0/%xmm1.  We collapse two by always loading
-	   both rdx and xmm1 with the second word.  For the remaining,
-	   bit 8 set means xmm0 gets the second word, and bit 9 means
-	   that rax gets the second word.  */
-	movq	-24(%rsp), %rcx
-	movq	-16(%rsp), %rdx
-	movq	-16(%rsp), %xmm1
-	testl	$0x100, %eax
-	cmovnz	%rdx, %rcx
-	movd	%rcx, %xmm0
-	testl	$0x200, %eax
-	movq	-24(%rsp), %rax
-	cmovnz	%rdx, %rax
-	ret
-
-	/* See the comment above Lload_sse; the same logic applies here.  */
-	.align	3
-LUW8:
-Lsave_sse:
-	movdqa	%xmm0, 48(%rsp)
-	movdqa	%xmm1, 64(%rsp)
-	movdqa	%xmm2, 80(%rsp)
-	movdqa	%xmm3, 96(%rsp)
-	movdqa	%xmm4, 112(%rsp)
-	movdqa	%xmm5, 128(%rsp)
-	movdqa	%xmm6, 144(%rsp)
-	movdqa	%xmm7, 160(%rsp)
-	jmp	Lret_from_save_sse
-
-LUW9:
-.section __TEXT,__eh_frame,coalesced,no_toc+strip_static_syms+live_support
-EH_frame1:
-	.set	L$set$0,LECIE1-LSCIE1		/* CIE Length */
-	.long	L$set$0
-LSCIE1:
-	.long	0x0		/* CIE Identifier Tag */
-	.byte	0x1		/* CIE Version */
-	.ascii	"zR\0"		/* CIE Augmentation */
-	.byte	0x1		/* uleb128 0x1; CIE Code Alignment Factor */
-	.byte	0x78		/* sleb128 -8; CIE Data Alignment Factor */
-	.byte	0x10		/* CIE RA Column */
-	.byte	0x1		/* uleb128 0x1; Augmentation size */
-	.byte	0x10		/* FDE Encoding (pcrel sdata4) */
-	.byte	0xc		/* DW_CFA_def_cfa, %rsp offset 8 */
-	.byte	0x7		/* uleb128 0x7 */
-	.byte	0x8		/* uleb128 0x8 */
-	.byte	0x90		/* DW_CFA_offset, column 0x10 */
-	.byte	0x1
-	.align	3
-LECIE1:
-	.globl _ffi_call_unix64.eh
-_ffi_call_unix64.eh:
-LSFDE1:
-	.set	L$set$1,LEFDE1-LASFDE1	/* FDE Length */
-	.long	L$set$1
-LASFDE1:
-	.long	LASFDE1-EH_frame1	/* FDE CIE offset */
-	.quad	LUW0-.			/* FDE initial location */
-	.set	L$set$2,LUW4-LUW0	/* FDE address range */
-	.quad	L$set$2
-	.byte	0x0			/* Augmentation size */
-	.byte	0x4			/* DW_CFA_advance_loc4 */
-	.set	L$set$3,LUW1-LUW0
-	.long	L$set$3
-
-	/* New stack frame based off rbp.  This is a itty bit of unwind
-	   trickery in that the CFA *has* changed.  There is no easy way
-	   to describe it correctly on entry to the function.  Fortunately,
-	   it doesn't matter too much since at all points we can correctly
-	   unwind back to ffi_call.  Note that the location to which we
-	   moved the return address is (the new) CFA-8, so from the
-	   perspective of the unwind info, it hasn't moved.  */
-	.byte	0xc			/* DW_CFA_def_cfa, %rbp offset 32 */
-	.byte	0x6
-	.byte	0x20
-	.byte	0x80+6			/* DW_CFA_offset, %rbp offset 2*-8 */
-	.byte	0x2
-	.byte	0xa			/* DW_CFA_remember_state */
-
-	.byte	0x4			/* DW_CFA_advance_loc4 */
-	.set	L$set$4,LUW2-LUW1
-	.long	L$set$4
-	.byte	0xc			/* DW_CFA_def_cfa, %rsp offset 8 */
-	.byte	0x7
-	.byte	0x8
-	.byte	0xc0+6			/* DW_CFA_restore, %rbp */
-
-	.byte	0x4			/* DW_CFA_advance_loc4 */
-	.set	L$set$5,LUW3-LUW2
-	.long	L$set$5
-	.byte	0xb			/* DW_CFA_restore_state */
-
-	.align	3
-LEFDE1:
-	.globl _ffi_closure_unix64.eh
-_ffi_closure_unix64.eh:
-LSFDE3:
-	.set	L$set$6,LEFDE3-LASFDE3	/* FDE Length */
-	.long	L$set$6
-LASFDE3:
-	.long	LASFDE3-EH_frame1	/* FDE CIE offset */
-	.quad	LUW5-.			/* FDE initial location */
-	.set	L$set$7,LUW9-LUW5	/* FDE address range */
-	.quad	L$set$7
-	.byte	0x0			/* Augmentation size */
-
-	.byte	0x4			/* DW_CFA_advance_loc4 */
-	.set	L$set$8,LUW6-LUW5
-	.long	L$set$8
-	.byte	0xe			/* DW_CFA_def_cfa_offset */
-	.byte	208,1			/* uleb128 208 */
-	.byte	0xa			/* DW_CFA_remember_state */
-
-	.byte	0x4			/* DW_CFA_advance_loc4 */
-	.set	L$set$9,LUW7-LUW6
-	.long	L$set$9
-	.byte	0xe			/* DW_CFA_def_cfa_offset */
-	.byte	0x8
-
-	.byte	0x4			/* DW_CFA_advance_loc4 */
-	.set	L$set$10,LUW8-LUW7
-	.long	L$set$10
-	.byte	0xb			/* DW_CFA_restore_state */
-
-	.align	3
-LEFDE3:
-	.subsections_via_symbols
-
-#endif /* __x86_64__ */