ffi 1.16.3 → 1.17.0-java

data/ext/ffi_c/libffi/src/x86/win64.S

@@ -1,254 +0,0 @@
-#ifdef __x86_64__
-#define LIBFFI_ASM
-#include <fficonfig.h>
-#include <ffi.h>
-#include <ffi_cfi.h>
-#include "asmnames.h"
-
-#if defined(HAVE_AS_CFI_PSEUDO_OP)
-        .cfi_sections   .debug_frame
-#endif
-
-#ifdef X86_WIN64
-#define SEH(...) __VA_ARGS__
-#define arg0	%rcx
-#define arg1	%rdx
-#define arg2	%r8
-#define arg3	%r9
-#else
-#define SEH(...)
-#define arg0	%rdi
-#define arg1	%rsi
-#define arg2	%rdx
-#define arg3	%rcx
-#endif
-
-/* This macro allows the safe creation of jump tables without an
-   actual table.  The entry points into the table are all 8 bytes.
-   The use of ORG asserts that we're at the correct location.  */
-/* ??? The clang assembler doesn't handle .org with symbolic expressions.  */
-#if defined(__clang__) || defined(__APPLE__) || (defined (__sun__) && defined(__svr4__))
-# define E(BASE, X)	.balign 8
-#else
-# define E(BASE, X)	.balign 8; .org BASE + (X) * 8
-#endif
-
-	.text
-
-/* ffi_call_win64 (void *stack, struct win64_call_frame *frame, void *r10)
-
-   Bit o trickiness here -- FRAME is the base of the stack frame
-   for this function.  This has been allocated by ffi_call.  We also
-   deallocate some of the stack that has been alloca'd.  */
-
-	.align	8
-	.globl	C(ffi_call_win64)
-	FFI_HIDDEN(C(ffi_call_win64))
-
-	SEH(.seh_proc ffi_call_win64)
-C(ffi_call_win64):
-	cfi_startproc
-	_CET_ENDBR
-	/* Set up the local stack frame and install it in rbp/rsp.  */
-	movq	(%rsp), %rax
-	movq	%rbp, (arg1)
-	movq	%rax, 8(arg1)
-	movq	arg1, %rbp
-	cfi_def_cfa(%rbp, 16)
-	cfi_rel_offset(%rbp, 0)
-	SEH(.seh_pushreg %rbp)
-	SEH(.seh_setframe %rbp, 0)
-	SEH(.seh_endprologue)
-	movq	arg0, %rsp
-
-	movq	arg2, %r10
-
-	/* Load all slots into both general and xmm registers.  */
-	movq	(%rsp), %rcx
-	movsd	(%rsp), %xmm0
-	movq	8(%rsp), %rdx
-	movsd	8(%rsp), %xmm1
-	movq	16(%rsp), %r8
-	movsd	16(%rsp), %xmm2
-	movq	24(%rsp), %r9
-	movsd	24(%rsp), %xmm3
-
-	call	*16(%rbp)
-
-	movl	24(%rbp), %ecx
-	movq	32(%rbp), %r8
-	leaq	0f(%rip), %r10
-	cmpl	$FFI_TYPE_SMALL_STRUCT_4B, %ecx
-	leaq	(%r10, %rcx, 8), %r10
-	ja	99f
-	_CET_NOTRACK jmp *%r10
-
-/* Below, we're space constrained most of the time.  Thus we eschew the
-   modern "mov, pop, ret" sequence (5 bytes) for "leave, ret" (2 bytes).  */
-#define epilogue		\
-	leaveq;			\
-	cfi_remember_state;	\
-	cfi_def_cfa(%rsp, 8);	\
-	cfi_restore(%rbp);	\
-	ret;			\
-	cfi_restore_state
-
-	.align	8
-0:
-E(0b, FFI_TYPE_VOID)
-	epilogue
-E(0b, FFI_TYPE_INT)
-	movslq	%eax, %rax
-	movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_FLOAT)
-	movss	%xmm0, (%r8)
-	epilogue
-E(0b, FFI_TYPE_DOUBLE)
-	movsd	%xmm0, (%r8)
-	epilogue
-// FFI_TYPE_LONGDOUBLE may be FFI_TYPE_DOUBLE but we need a different value here.
-E(0b, FFI_TYPE_DOUBLE + 1)
-	call	PLT(C(abort))
-E(0b, FFI_TYPE_UINT8)
-	movzbl	%al, %eax
-	movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SINT8)
-	movsbq	%al, %rax
-	jmp	98f
-E(0b, FFI_TYPE_UINT16)
-	movzwl	%ax, %eax
-	movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SINT16)
-	movswq	%ax, %rax
-	jmp	98f
-E(0b, FFI_TYPE_UINT32)
-	movl	%eax, %eax
-	movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SINT32)
-	movslq	%eax, %rax
-	movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_UINT64)
-98:	movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SINT64)
-	movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_STRUCT)
-	epilogue
-E(0b, FFI_TYPE_POINTER)
-	movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_COMPLEX)
-	call	PLT(C(abort))
-E(0b, FFI_TYPE_SMALL_STRUCT_1B)
-	movb	%al, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SMALL_STRUCT_2B)
-	movw	%ax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SMALL_STRUCT_4B)
-	movl	%eax, (%r8)
-	epilogue
-
-	.align	8
-99:	call	PLT(C(abort))
-
-	epilogue
-
-	cfi_endproc
-	SEH(.seh_endproc)
-
-
-/* 32 bytes of outgoing register stack space, 8 bytes of alignment,
-   16 bytes of result, 32 bytes of xmm registers.  */
-#define ffi_clo_FS	(32+8+16+32)
-#define ffi_clo_OFF_R	(32+8)
-#define ffi_clo_OFF_X	(32+8+16)
-
-	.align	8
-	.globl	C(ffi_go_closure_win64)
-	FFI_HIDDEN(C(ffi_go_closure_win64))
-
-	SEH(.seh_proc ffi_go_closure_win64)
-C(ffi_go_closure_win64):
-	cfi_startproc
-	_CET_ENDBR
-	/* Save all integer arguments into the incoming reg stack space.  */
-	movq	%rcx, 8(%rsp)
-	movq	%rdx, 16(%rsp)
-	movq	%r8, 24(%rsp)
-	movq	%r9, 32(%rsp)
-
-	movq	8(%r10), %rcx			/* load cif */
-	movq	16(%r10), %rdx			/* load fun */
-	movq	%r10, %r8			/* closure is user_data */
-	jmp	0f
-	cfi_endproc
-	SEH(.seh_endproc)
-
-	.align	8
-	.globl	C(ffi_closure_win64)
-	FFI_HIDDEN(C(ffi_closure_win64))
-
-	SEH(.seh_proc ffi_closure_win64)
-C(ffi_closure_win64):
-	cfi_startproc
-	_CET_ENDBR
-	/* Save all integer arguments into the incoming reg stack space.  */
-	movq	%rcx, 8(%rsp)
-	movq	%rdx, 16(%rsp)
-	movq	%r8, 24(%rsp)
-	movq	%r9, 32(%rsp)
-
-	movq	FFI_TRAMPOLINE_SIZE(%r10), %rcx		/* load cif */
-	movq	FFI_TRAMPOLINE_SIZE+8(%r10), %rdx	/* load fun */
-	movq	FFI_TRAMPOLINE_SIZE+16(%r10), %r8	/* load user_data */
-0:
-	subq	$ffi_clo_FS, %rsp
-	cfi_adjust_cfa_offset(ffi_clo_FS)
-	SEH(.seh_stackalloc ffi_clo_FS)
-	SEH(.seh_endprologue)
-
-	/* Save all sse arguments into the stack frame.  */
-	movsd	%xmm0, ffi_clo_OFF_X(%rsp)
-	movsd	%xmm1, ffi_clo_OFF_X+8(%rsp)
-	movsd	%xmm2, ffi_clo_OFF_X+16(%rsp)
-	movsd	%xmm3, ffi_clo_OFF_X+24(%rsp)
-
-	leaq	ffi_clo_OFF_R(%rsp), %r9
-	call	PLT(C(ffi_closure_win64_inner))
-
-	/* Load the result into both possible result registers.  */
-	movq    ffi_clo_OFF_R(%rsp), %rax
-	movsd   ffi_clo_OFF_R(%rsp), %xmm0
-
-	addq	$ffi_clo_FS, %rsp
-	cfi_adjust_cfa_offset(-ffi_clo_FS)
-	ret
-
-	cfi_endproc
-	SEH(.seh_endproc)
-
-#if defined(FFI_EXEC_STATIC_TRAMP)
-	.align	8
-	.globl	C(ffi_closure_win64_alt)
-	FFI_HIDDEN(C(ffi_closure_win64_alt))
-
-	SEH(.seh_proc ffi_closure_win64_alt)
-C(ffi_closure_win64_alt):
-	_CET_ENDBR
-	movq	8(%rsp), %r10
-	addq	$16, %rsp
-	jmp	C(ffi_closure_win64)
-	SEH(.seh_endproc)
-#endif
-#endif /* __x86_64__ */
-
-#if defined __ELF__ && defined __linux__
-	.section	.note.GNU-stack,"",@progbits
-#endif

data/ext/ffi_c/libffi/src/x86/win64_intel.S

@@ -1,238 +0,0 @@
-#define LIBFFI_ASM
-#include <fficonfig.h>
-#include <ffi.h>
-#include <ffi_cfi.h>
-#include "asmnames.h"
-
-#if defined(HAVE_AS_CFI_PSEUDO_OP)
-        .cfi_sections   .debug_frame
-#endif
-
-#ifdef X86_WIN64
-#define SEH(...) __VA_ARGS__
-#define arg0	rcx
-#define arg1	rdx
-#define arg2	r8
-#define arg3	r9
-#else
-#define SEH(...)
-#define arg0	rdi
-#define arg1	rsi
-#define arg2	rdx
-#define arg3	rcx
-#endif
-
-/* This macro allows the safe creation of jump tables without an
-   actual table.  The entry points into the table are all 8 bytes.
-   The use of ORG asserts that we're at the correct location.  */
-/* ??? The clang assembler doesn't handle .org with symbolic expressions.  */
-#if defined(__clang__) || defined(__APPLE__) || (defined (__sun__) && defined(__svr4__))
-# define E(BASE, X)	ALIGN 8
-#else
-# define E(BASE, X)	ALIGN 8; ORG BASE + (X) * 8
-#endif
-
-	.CODE
-	extern PLT(C(abort)):near
-	extern C(ffi_closure_win64_inner):near
-
-/* ffi_call_win64 (void *stack, struct win64_call_frame *frame, void *r10)
-
-   Bit o trickiness here -- FRAME is the base of the stack frame
-   for this function.  This has been allocated by ffi_call.  We also
-   deallocate some of the stack that has been alloca'd.  */
-
-	ALIGN	8
-	PUBLIC	C(ffi_call_win64)
-
-	; SEH(.safesh ffi_call_win64)
-C(ffi_call_win64) proc SEH(frame)
-	cfi_startproc
-	/* Set up the local stack frame and install it in rbp/rsp.  */
-	mov	RAX, [RSP] ; 	movq	(%rsp), %rax
-	mov [arg1], RBP ; movq	%rbp, (arg1)
-	mov [arg1 + 8], RAX;	movq	%rax, 8(arg1)
-	mov	 RBP, arg1; movq	arg1, %rbp
-	cfi_def_cfa(rbp, 16)
-	cfi_rel_offset(rbp, 0)
-	SEH(.pushreg rbp)
-	SEH(.setframe rbp, 0)
-	SEH(.endprolog)
-	mov	RSP, arg0 ;	movq	arg0, %rsp
-
-	mov	R10, arg2 ; movq	arg2, %r10
-
-	/* Load all slots into both general and xmm registers.  */
-	mov	RCX, [RSP] ;	movq	(%rsp), %rcx
-	movsd XMM0, qword ptr [RSP] ; movsd	(%rsp), %xmm0
-	mov	RDX, [RSP + 8] ;movq	8(%rsp), %rdx
-	movsd XMM1, qword ptr [RSP + 8];	movsd	8(%rsp), %xmm1
-	mov R8, [RSP + 16] ; movq	16(%rsp), %r8
-	movsd	XMM2, qword ptr [RSP + 16] ; movsd	16(%rsp), %xmm2
-	mov	R9, [RSP + 24] ; movq	24(%rsp), %r9
-	movsd	XMM3, qword ptr [RSP + 24] ;movsd	24(%rsp), %xmm3
-
-	CALL qword ptr [RBP + 16] ; call	*16(%rbp)
-
-	mov	 ECX, [RBP + 24] ; movl	24(%rbp), %ecx
-	mov	R8, [RBP + 32] ; movq	32(%rbp), %r8
-	LEA	R10, ffi_call_win64_tab ; leaq	0f(%rip), %r10
-	CMP	ECX, FFI_TYPE_SMALL_STRUCT_4B ; cmpl	$FFI_TYPE_SMALL_STRUCT_4B, %ecx
-	LEA	R10, [R10 + RCX*8] ; leaq	(%r10, %rcx, 8), %r10
-	JA	L99 ; ja	99f
-	JMP	R10 ; jmp	*%r10
-
-/* Below, we're space constrained most of the time.  Thus we eschew the
-   modern "mov, pop, ret" sequence (5 bytes) for "leave, ret" (2 bytes).  */
-epilogue macro
-	LEAVE
-	cfi_remember_state
-	cfi_def_cfa(rsp, 8)
-	cfi_restore(rbp)
-	RET
-	cfi_restore_state
-endm
-
-	ALIGN 8
-ffi_call_win64_tab LABEL NEAR
-E(0b, FFI_TYPE_VOID)
-	epilogue
-E(0b, FFI_TYPE_INT)
-	movsxd rax, eax ; movslq	%eax, %rax
-	mov qword ptr [r8], rax; movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_FLOAT)
-	movss dword ptr [r8], xmm0 ; movss	%xmm0, (%r8)
-	epilogue
-E(0b, FFI_TYPE_DOUBLE)
-	movsd qword ptr[r8], xmm0; movsd	%xmm0, (%r8)
-	epilogue
-// FFI_TYPE_LONGDOUBLE may be FFI_TYPE_DOUBLE but we need a different value here.
-E(0b, FFI_TYPE_DOUBLE + 1)
-	call	PLT(C(abort))
-E(0b, FFI_TYPE_UINT8)
-	movzx eax, al ;movzbl	%al, %eax
-	mov qword ptr[r8], rax; movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SINT8)
-	movsx rax, al ; movsbq	%al, %rax
-	jmp	L98
-E(0b, FFI_TYPE_UINT16)
-	movzx eax, ax ; movzwl	%ax, %eax
-	mov qword ptr[r8], rax; movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SINT16)
-	movsx rax, ax; movswq	%ax, %rax
-	jmp	L98
-E(0b, FFI_TYPE_UINT32)
-	mov eax, eax; movl	%eax, %eax
-	mov qword ptr[r8], rax ; movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SINT32)
-	movsxd rax, eax; movslq	%eax, %rax
-	mov qword ptr [r8], rax; movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_UINT64)
-L98 LABEL near
-	mov qword ptr [r8], rax ; movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SINT64)
-	mov qword ptr [r8], rax;movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_STRUCT)
-	epilogue
-E(0b, FFI_TYPE_POINTER)
-	mov qword ptr [r8], rax ;movq	%rax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_COMPLEX)
-	call	PLT(C(abort))
-E(0b, FFI_TYPE_SMALL_STRUCT_1B)
-	mov byte ptr [r8], al ; movb	%al, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SMALL_STRUCT_2B)
-	mov word ptr [r8], ax ; movw	%ax, (%r8)
-	epilogue
-E(0b, FFI_TYPE_SMALL_STRUCT_4B)
-	mov dword ptr [r8], eax ; movl	%eax, (%r8)
-	epilogue
-
-	align	8
-L99 LABEL near
-	call	PLT(C(abort))
-
-	epilogue
-
-	cfi_endproc
-	C(ffi_call_win64) endp
-
-
-/* 32 bytes of outgoing register stack space, 8 bytes of alignment,
-   16 bytes of result, 32 bytes of xmm registers.  */
-#define ffi_clo_FS	(32+8+16+32)
-#define ffi_clo_OFF_R	(32+8)
-#define ffi_clo_OFF_X	(32+8+16)
-
-	align	8
-	PUBLIC	C(ffi_go_closure_win64)
-
-C(ffi_go_closure_win64) proc
-	cfi_startproc
-	/* Save all integer arguments into the incoming reg stack space.  */
-	mov qword ptr [rsp + 8], rcx; movq	%rcx, 8(%rsp)
-	mov qword ptr [rsp + 16], rdx; movq	%rdx, 16(%rsp)
-	mov qword ptr [rsp + 24], r8; movq	%r8, 24(%rsp)
-	mov qword ptr [rsp + 32], r9 ;movq	%r9, 32(%rsp)
-
-	mov rcx, qword ptr [r10 + 8]; movq	8(%r10), %rcx			/* load cif */
-	mov rdx, qword ptr [r10 + 16];  movq	16(%r10), %rdx			/* load fun */
-	mov r8, r10 ; movq	%r10, %r8			/* closure is user_data */
-	jmp	ffi_closure_win64_2
-	cfi_endproc
-	C(ffi_go_closure_win64) endp
-
-	align	8
-	
-PUBLIC C(ffi_closure_win64)
-C(ffi_closure_win64) PROC FRAME
-	cfi_startproc
-	/* Save all integer arguments into the incoming reg stack space.  */
-	mov qword ptr [rsp + 8], rcx; movq	%rcx, 8(%rsp)
-	mov qword ptr [rsp + 16], rdx;	movq	%rdx, 16(%rsp)
-	mov qword ptr [rsp + 24], r8; 	movq	%r8, 24(%rsp)
-	mov qword ptr [rsp + 32], r9;	movq	%r9, 32(%rsp)
-
-	mov rcx, qword ptr [FFI_TRAMPOLINE_SIZE + r10]	;movq	FFI_TRAMPOLINE_SIZE(%r10), %rcx		/* load cif */
-	mov rdx, qword ptr [FFI_TRAMPOLINE_SIZE + 8 + r10] ;	movq	FFI_TRAMPOLINE_SIZE+8(%r10), %rdx	/* load fun */
-	mov r8, qword ptr [FFI_TRAMPOLINE_SIZE+16+r10] ;movq	FFI_TRAMPOLINE_SIZE+16(%r10), %r8	/* load user_data */
-ffi_closure_win64_2 LABEL near
-	sub rsp, ffi_clo_FS ;subq	$ffi_clo_FS, %rsp
-	cfi_adjust_cfa_offset(ffi_clo_FS)
-	SEH(.allocstack ffi_clo_FS)
-	SEH(.endprolog)
-
-	/* Save all sse arguments into the stack frame.  */
-	movsd qword ptr [ffi_clo_OFF_X + rsp], xmm0	; movsd	%xmm0, ffi_clo_OFF_X(%rsp)
-	movsd qword ptr [ffi_clo_OFF_X+8+rsp], xmm1 ; movsd	%xmm1, ffi_clo_OFF_X+8(%rsp)
-	movsd qword ptr [ffi_clo_OFF_X+16+rsp], xmm2 ; movsd %xmm2, ffi_clo_OFF_X+16(%rsp)
-	movsd qword ptr [ffi_clo_OFF_X+24+rsp], xmm3 ; movsd %xmm3, ffi_clo_OFF_X+24(%rsp)
-
-	lea	r9, [ffi_clo_OFF_R + rsp] ; leaq	ffi_clo_OFF_R(%rsp), %r9
-	call C(ffi_closure_win64_inner)
-
-	/* Load the result into both possible result registers.  */
-	
-	mov rax, qword ptr [ffi_clo_OFF_R + rsp] ;movq    ffi_clo_OFF_R(%rsp), %rax
-	movsd xmm0, qword ptr [rsp + ffi_clo_OFF_R] ;movsd   ffi_clo_OFF_R(%rsp), %xmm0
-
-	add rsp, ffi_clo_FS ;addq	$ffi_clo_FS, %rsp
-	cfi_adjust_cfa_offset(-ffi_clo_FS)
-	ret
-
-	cfi_endproc
-	C(ffi_closure_win64) endp
-
-#if defined __ELF__ && defined __linux__
-	.section	.note.GNU-stack,"",@progbits
-#endif
-_text ends
-end