extzstd 0.0.2.CONCEPT-x86-mingw32 → 0.0.3.CONCEPT-x86-mingw32

data/contrib/zstd/fse.h

@@ -1,320 +0,0 @@
-/* ******************************************************************
-   FSE : Finite State Entropy coder
-   header file
-   Copyright (C) 2013-2015, Yann Collet.
-
-   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-       * Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-       * Redistributions in binary form must reproduce the above
-   copyright notice, this list of conditions and the following disclaimer
-   in the documentation and/or other materials provided with the
-   distribution.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-   You can contact the author at :
-   - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
-   - Public forum : https://groups.google.com/forum/#!forum/lz4c
-****************************************************************** */
-#pragma once
-
-#if defined (__cplusplus)
-extern "C" {
-#endif
-
-
-/******************************************
-*  Includes
-******************************************/
-#include <stddef.h>    /* size_t, ptrdiff_t */
-
-
-/******************************************
-*  FSE simple functions
-******************************************/
-size_t FSE_compress(void* dst, size_t maxDstSize,
-              const void* src, size_t srcSize);
-size_t FSE_decompress(void* dst,  size_t maxDstSize,
-                const void* cSrc, size_t cSrcSize);
-/*
-FSE_compress():
-    Compress content of buffer 'src', of size 'srcSize', into destination buffer 'dst'.
-    'dst' buffer must be already allocated. Compression runs faster is maxDstSize >= FSE_compressBound(srcSize)
-    return : size of compressed data (<= maxDstSize)
-    Special values : if return == 0, srcData is not compressible => Nothing is stored within dst !!!
-                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression instead.
-                     if FSE_isError(return), compression failed (more details using FSE_getErrorName())
-
-FSE_decompress():
-    Decompress FSE data from buffer 'cSrc', of size 'cSrcSize',
-    into already allocated destination buffer 'dst', of size 'maxDstSize'.
-    return : size of regenerated data (<= maxDstSize)
-             or an error code, which can be tested using FSE_isError()
-
-    ** Important ** : FSE_decompress() doesn't decompress non-compressible nor RLE data !!!
-    Why ? : making this distinction requires a header.
-    Header management is intentionally delegated to the user layer, which can better manage special cases.
-*/
-
-
-/******************************************
-*  Huff0 simple functions
-******************************************/
-size_t HUF_compress(void* dst, size_t maxDstSize,
-              const void* src, size_t srcSize);
-size_t HUF_decompress(void* dst,  size_t maxDstSize,
-                const void* cSrc, size_t cSrcSize);
-/*
-HUF_compress():
-    Compress content of buffer 'src', of size 'srcSize', into destination buffer 'dst'.
-    'dst' buffer must be already allocated. Compression runs faster is maxDstSize >= HUF_compressBound(srcSize)
-    return : size of compressed data (<= maxDstSize)
-    Special values : if return == 0, srcData is not compressible => Nothing is stored within dst !!!
-                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression.
-                     if FSE_isError(return), compression failed (more details using FSE_getErrorName())
-
-HUF_decompress():
-    Decompress Huff0 data from buffer 'cSrc', of size 'cSrcSize',
-    into already allocated destination buffer 'dst', of size 'maxDstSize'.
-    return : size of regenerated data (<= maxDstSize)
-             or an error code, which can be tested using FSE_isError()
-
-    ** Important ** : HUF_decompress() doesn't decompress non-compressible nor RLE data !!!
-*/
-
-
-/******************************************
-*  Tool functions
-******************************************/
-size_t FSE_compressBound(size_t size);       /* maximum compressed size */
-
-/* Error Management */
-unsigned    FSE_isError(size_t code);        /* tells if a return value is an error code */
-const char* FSE_getErrorName(size_t code);   /* provides error code string (useful for debugging) */
-
-
-/******************************************
-*  FSE advanced functions
-******************************************/
-/*
-FSE_compress2():
-    Same as FSE_compress(), but allows the selection of 'maxSymbolValue' and 'tableLog'
-    Both parameters can be defined as '0' to mean : use default value
-    return : size of compressed data
-    Special values : if return == 0, srcData is not compressible => Nothing is stored within cSrc !!!
-                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression.
-                     if FSE_isError(return), it's an error code.
-*/
-size_t FSE_compress2 (void* dst, size_t dstSize, const void* src, size_t srcSize, unsigned maxSymbolValue, unsigned tableLog);
-
-size_t HUF_compress2 (void* dst, size_t dstSize, const void* src, size_t srcSize, unsigned maxSymbolValue, unsigned tableLog);
-
-
-/******************************************
-*  FSE detailed API
-******************************************/
-/*
-FSE_compress() does the following:
-1. count symbol occurrence from source[] into table count[]
-2. normalize counters so that sum(count[]) == Power_of_2 (2^tableLog)
-3. save normalized counters to memory buffer using writeNCount()
-4. build encoding table 'CTable' from normalized counters
-5. encode the data stream using encoding table 'CTable'
-
-FSE_decompress() does the following:
-1. read normalized counters with readNCount()
-2. build decoding table 'DTable' from normalized counters
-3. decode the data stream using decoding table 'DTable'
-
-The following API allows targeting specific sub-functions for advanced tasks.
-For example, it's possible to compress several blocks using the same 'CTable',
-or to save and provide normalized distribution using external method.
-*/
-
-/* *** COMPRESSION *** */
-
-/*
-FSE_count():
-   Provides the precise count of each symbol within a table 'count'
-   'count' is a table of unsigned int, of minimum size (maxSymbolValuePtr[0]+1).
-   maxSymbolValuePtr[0] will be updated if detected smaller than initially expected
-   return : the count of the most frequent symbol (which is not identified)
-            if return == srcSize, there is only one symbol.
-            if FSE_isError(return), it's an error code. */
-size_t FSE_count(unsigned* count, unsigned* maxSymbolValuePtr, const unsigned char* src, size_t srcSize);
-
-/*
-FSE_optimalTableLog():
-   dynamically downsize 'tableLog' when conditions are met.
-   It saves CPU time, by using smaller tables, while preserving or even improving compression ratio.
-   return : recommended tableLog (necessarily <= initial 'tableLog') */
-unsigned FSE_optimalTableLog(unsigned tableLog, size_t srcSize, unsigned maxSymbolValue);
-
-/*
-FSE_normalizeCount():
-   normalize counters so that sum(count[]) == Power_of_2 (2^tableLog)
-   'normalizedCounter' is a table of short, of minimum size (maxSymbolValue+1).
-   return : tableLog,
-            or an errorCode, which can be tested using FSE_isError() */
-size_t FSE_normalizeCount(short* normalizedCounter, unsigned tableLog, const unsigned* count, size_t srcSize, unsigned maxSymbolValue);
-
-/*
-FSE_NCountWriteBound():
-   Provides the maximum possible size of an FSE normalized table, given 'maxSymbolValue' and 'tableLog'
-   Typically useful for allocation purpose. */
-size_t FSE_NCountWriteBound(unsigned maxSymbolValue, unsigned tableLog);
-
-/*
-FSE_writeNCount():
-   Compactly save 'normalizedCounter' into 'buffer'.
-   return : size of the compressed table
-            or an errorCode, which can be tested using FSE_isError() */
-size_t FSE_writeNCount (void* buffer, size_t bufferSize, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);
-
-
-/*
-Constructor and Destructor of type FSE_CTable
-    Note that its size depends on 'tableLog' and 'maxSymbolValue' */
-typedef unsigned FSE_CTable;   /* don't allocate that. It's just a way to be more restrictive than void* */
-FSE_CTable* FSE_createCTable (unsigned tableLog, unsigned maxSymbolValue);
-void        FSE_freeCTable (FSE_CTable* ct);
-
-/*
-FSE_buildCTable():
-   Builds 'ct', which must be already allocated, using FSE_createCTable()
-   return : 0
-            or an errorCode, which can be tested using FSE_isError() */
-size_t FSE_buildCTable(FSE_CTable* ct, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);
-
-/*
-FSE_compress_usingCTable():
-   Compress 'src' using 'ct' into 'dst' which must be already allocated
-   return : size of compressed data (<= maxDstSize)
-            or 0 if compressed data could not fit into 'dst'
-            or an errorCode, which can be tested using FSE_isError() */
-size_t FSE_compress_usingCTable (void* dst, size_t maxDstSize, const void* src, size_t srcSize, const FSE_CTable* ct);
-
-/*
-Tutorial :
-----------
-The first step is to count all symbols. FSE_count() does this job very fast.
-Result will be saved into 'count', a table of unsigned int, which must be already allocated, and have 'maxSymbolValuePtr[0]+1' cells.
-'src' is a table of bytes of size 'srcSize'. All values within 'src' MUST be <= maxSymbolValuePtr[0]
-maxSymbolValuePtr[0] will be updated, with its real value (necessarily <= original value)
-FSE_count() will return the number of occurrence of the most frequent symbol.
-This can be used to know if there is a single symbol within 'src', and to quickly evaluate its compressibility.
-If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError()).
-
-The next step is to normalize the frequencies.
-FSE_normalizeCount() will ensure that sum of frequencies is == 2 ^'tableLog'.
-It also guarantees a minimum of 1 to any Symbol with frequency >= 1.
-You can use 'tableLog'==0 to mean "use default tableLog value".
-If you are unsure of which tableLog value to use, you can ask FSE_optimalTableLog(),
-which will provide the optimal valid tableLog given sourceSize, maxSymbolValue, and a user-defined maximum (0 means "default").
-
-The result of FSE_normalizeCount() will be saved into a table,
-called 'normalizedCounter', which is a table of signed short.
-'normalizedCounter' must be already allocated, and have at least 'maxSymbolValue+1' cells.
-The return value is tableLog if everything proceeded as expected.
-It is 0 if there is a single symbol within distribution.
-If there is an error (ex: invalid tableLog value), the function will return an ErrorCode (which can be tested using FSE_isError()).
-
-'normalizedCounter' can be saved in a compact manner to a memory area using FSE_writeNCount().
-'buffer' must be already allocated.
-For guaranteed success, buffer size must be at least FSE_headerBound().
-The result of the function is the number of bytes written into 'buffer'.
-If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError(); ex : buffer size too small).
-
-'normalizedCounter' can then be used to create the compression table 'CTable'.
-The space required by 'CTable' must be already allocated, using FSE_createCTable().
-You can then use FSE_buildCTable() to fill 'CTable'.
-If there is an error, both functions will return an ErrorCode (which can be tested using FSE_isError()).
-
-'CTable' can then be used to compress 'src', with FSE_compress_usingCTable().
-Similar to FSE_count(), the convention is that 'src' is assumed to be a table of char of size 'srcSize'
-The function returns the size of compressed data (without header), necessarily <= maxDstSize.
-If it returns '0', compressed data could not fit into 'dst'.
-If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError()).
-*/
-
-
-/* *** DECOMPRESSION *** */
-
-/*
-FSE_readNCount():
-   Read compactly saved 'normalizedCounter' from 'rBuffer'.
-   return : size read from 'rBuffer'
-            or an errorCode, which can be tested using FSE_isError()
-            maxSymbolValuePtr[0] and tableLogPtr[0] will also be updated with their respective values */
-size_t FSE_readNCount (short* normalizedCounter, unsigned* maxSymbolValuePtr, unsigned* tableLogPtr, const void* rBuffer, size_t rBuffSize);
-
-/*
-Constructor and Destructor of type FSE_DTable
-    Note that its size depends on 'tableLog' */
-typedef unsigned FSE_DTable;   /* don't allocate that. It's just a way to be more restrictive than void* */
-FSE_DTable* FSE_createDTable(unsigned tableLog);
-void        FSE_freeDTable(FSE_DTable* dt);
-
-/*
-FSE_buildDTable():
-   Builds 'dt', which must be already allocated, using FSE_createDTable()
-   return : 0,
-            or an errorCode, which can be tested using FSE_isError() */
-size_t FSE_buildDTable (FSE_DTable* dt, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);
-
-/*
-FSE_decompress_usingDTable():
-   Decompress compressed source 'cSrc' of size 'cSrcSize' using 'dt'
-   into 'dst' which must be already allocated.
-   return : size of regenerated data (necessarily <= maxDstSize)
-            or an errorCode, which can be tested using FSE_isError() */
-size_t FSE_decompress_usingDTable(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const FSE_DTable* dt);
-
-/*
-Tutorial :
-----------
-(Note : these functions only decompress FSE-compressed blocks.
- If block is uncompressed, use memcpy() instead
- If block is a single repeated byte, use memset() instead )
-
-The first step is to obtain the normalized frequencies of symbols.
-This can be performed by FSE_readNCount() if it was saved using FSE_writeNCount().
-'normalizedCounter' must be already allocated, and have at least 'maxSymbolValuePtr[0]+1' cells of signed short.
-In practice, that means it's necessary to know 'maxSymbolValue' beforehand,
-or size the table to handle worst case situations (typically 256).
-FSE_readNCount() will provide 'tableLog' and 'maxSymbolValue'.
-The result of FSE_readNCount() is the number of bytes read from 'rBuffer'.
-Note that 'rBufferSize' must be at least 4 bytes, even if useful information is less than that.
-If there is an error, the function will return an error code, which can be tested using FSE_isError().
-
-The next step is to build the decompression tables 'FSE_DTable' from 'normalizedCounter'.
-This is performed by the function FSE_buildDTable().
-The space required by 'FSE_DTable' must be already allocated using FSE_createDTable().
-If there is an error, the function will return an error code, which can be tested using FSE_isError().
-
-'FSE_DTable' can then be used to decompress 'cSrc', with FSE_decompress_usingDTable().
-'cSrcSize' must be strictly correct, otherwise decompression will fail.
-FSE_decompress_usingDTable() result will tell how many bytes were regenerated (<=maxDstSize).
-If there is an error, the function will return an error code, which can be tested using FSE_isError(). (ex: dst buffer too small)
-*/
-
-
-#if defined (__cplusplus)
-}
-#endif

data/contrib/zstd/fse_static.h

@@ -1,282 +0,0 @@
-/* ******************************************************************
-   FSE : Finite State Entropy coder
-   header file for static linking (only)
-   Copyright (C) 2013-2015, Yann Collet
-
-   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-       * Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-       * Redistributions in binary form must reproduce the above
-   copyright notice, this list of conditions and the following disclaimer
-   in the documentation and/or other materials provided with the
-   distribution.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-   You can contact the author at :
-   - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
-   - Public forum : https://groups.google.com/forum/#!forum/lz4c
-****************************************************************** */
-#pragma once
-
-#if defined (__cplusplus)
-extern "C" {
-#endif
-
-
-/******************************************
-*  FSE API compatible with DLL
-******************************************/
-#include "fse.h"
-
-
-/******************************************
-*  Static allocation
-******************************************/
-/* FSE buffer bounds */
-#define FSE_NCOUNTBOUND 512
-#define FSE_BLOCKBOUND(size) (size + (size>>7))
-#define FSE_COMPRESSBOUND(size) (FSE_NCOUNTBOUND + FSE_BLOCKBOUND(size))   /* Macro version, useful for static allocation */
-
-/* You can statically allocate FSE CTable/DTable as a table of unsigned using below macro */
-#define FSE_CTABLE_SIZE_U32(maxTableLog, maxSymbolValue)   (1 + (1<<(maxTableLog-1)) + ((maxSymbolValue+1)*2))
-#define FSE_DTABLE_SIZE_U32(maxTableLog)                   (1 + (1<<maxTableLog))
-
-/* Huff0 buffer bounds */
-#define HUF_CTABLEBOUND 129
-#define HUF_BLOCKBOUND(size) (size + (size>>8) + 8)   /* only true if pre-filtered with fast heuristic */
-#define HUF_COMPRESSBOUND(size) (HUF_CTABLEBOUND + HUF_BLOCKBOUND(size))   /* Macro version, useful for static allocation */
-
-/* You can statically allocate Huff0 DTable as a table of unsigned short using below macro */
-#define HUF_DTABLE_SIZE_U16(maxTableLog)   (1 + (1<<maxTableLog))
-#define HUF_CREATE_STATIC_DTABLE(DTable, maxTableLog) \
-        unsigned short DTable[HUF_DTABLE_SIZE_U16(maxTableLog)] = { maxTableLog }
-
-
-/******************************************
-*  Error Management
-******************************************/
-#define FSE_LIST_ERRORS(ITEM) \
-        ITEM(FSE_OK_NoError) ITEM(FSE_ERROR_GENERIC) \
-        ITEM(FSE_ERROR_tableLog_tooLarge) ITEM(FSE_ERROR_maxSymbolValue_tooLarge) ITEM(FSE_ERROR_maxSymbolValue_tooSmall) \
-        ITEM(FSE_ERROR_dstSize_tooSmall) ITEM(FSE_ERROR_srcSize_wrong)\
-        ITEM(FSE_ERROR_corruptionDetected) \
-        ITEM(FSE_ERROR_maxCode)
-
-#define FSE_GENERATE_ENUM(ENUM) ENUM,
-typedef enum { FSE_LIST_ERRORS(FSE_GENERATE_ENUM) } FSE_errorCodes;  /* enum is exposed, to detect & handle specific errors; compare function result to -enum value */
-
-
-/******************************************
-*  FSE advanced API
-******************************************/
-size_t FSE_countFast(unsigned* count, unsigned* maxSymbolValuePtr, const unsigned char* src, size_t srcSize);
-/* same as FSE_count(), but blindly trust that all values within src are <= maxSymbolValuePtr[0] */
-
-size_t FSE_buildCTable_raw (FSE_CTable* ct, unsigned nbBits);
-/* build a fake FSE_CTable, designed to not compress an input, where each symbol uses nbBits */
-
-size_t FSE_buildCTable_rle (FSE_CTable* ct, unsigned char symbolValue);
-/* build a fake FSE_CTable, designed to compress always the same symbolValue */
-
-size_t FSE_buildDTable_raw (FSE_DTable* dt, unsigned nbBits);
-/* build a fake FSE_DTable, designed to read an uncompressed bitstream where each symbol uses nbBits */
-
-size_t FSE_buildDTable_rle (FSE_DTable* dt, unsigned char symbolValue);
-/* build a fake FSE_DTable, designed to always generate the same symbolValue */
-
-
-/******************************************
-*  FSE symbol compression API
-******************************************/
-/*
-   This API consists of small unitary functions, which highly benefit from being inlined.
-   You will want to enable link-time-optimization to ensure these functions are properly inlined in your binary.
-   Visual seems to do it automatically.
-   For gcc or clang, you'll need to add -flto flag at compilation and linking stages.
-   If none of these solutions is applicable, include "fse.c" directly.
-*/
-
-typedef struct
-{
-    size_t bitContainer;
-    int    bitPos;
-    char*  startPtr;
-    char*  ptr;
-    char*  endPtr;
-} FSE_CStream_t;
-
-typedef struct
-{
-    ptrdiff_t   value;
-    const void* stateTable;
-    const void* symbolTT;
-    unsigned    stateLog;
-} FSE_CState_t;
-
-size_t FSE_initCStream(FSE_CStream_t* bitC, void* dstBuffer, size_t maxDstSize);
-void   FSE_initCState(FSE_CState_t* CStatePtr, const FSE_CTable* ct);
-
-void   FSE_encodeSymbol(FSE_CStream_t* bitC, FSE_CState_t* CStatePtr, unsigned symbol);
-void   FSE_addBits(FSE_CStream_t* bitC, size_t value, unsigned nbBits);
-void   FSE_flushBits(FSE_CStream_t* bitC);
-
-void   FSE_flushCState(FSE_CStream_t* bitC, const FSE_CState_t* CStatePtr);
-size_t FSE_closeCStream(FSE_CStream_t* bitC);
-
-/*
-These functions are inner components of FSE_compress_usingCTable().
-They allow the creation of custom streams, mixing multiple tables and bit sources.
-
-A key property to keep in mind is that encoding and decoding are done **in reverse direction**.
-So the first symbol you will encode is the last you will decode, like a LIFO stack.
-
-You will need a few variables to track your CStream. They are :
-
-FSE_CTable    ct;         // Provided by FSE_buildCTable()
-FSE_CStream_t bitStream;  // bitStream tracking structure
-FSE_CState_t  state;      // State tracking structure (can have several)
-
-
-The first thing to do is to init bitStream and state.
-    size_t errorCode = FSE_initCStream(&bitStream, dstBuffer, maxDstSize);
-    FSE_initCState(&state, ct);
-
-Note that FSE_initCStream() can produce an error code, so its result should be tested, using FSE_isError();
-You can then encode your input data, byte after byte.
-FSE_encodeSymbol() outputs a maximum of 'tableLog' bits at a time.
-Remember decoding will be done in reverse direction.
-    FSE_encodeByte(&bitStream, &state, symbol);
-
-At any time, you can also add any bit sequence.
-Note : maximum allowed nbBits is 25, for compatibility with 32-bits decoders
-    FSE_addBits(&bitStream, bitField, nbBits);
-
-The above methods don't commit data to memory, they just store it into local register, for speed.
-Local register size is 64-bits on 64-bits systems, 32-bits on 32-bits systems (size_t).
-Writing data to memory is a manual operation, performed by the flushBits function.
-    FSE_flushBits(&bitStream);
-
-Your last FSE encoding operation shall be to flush your last state value(s).
-    FSE_flushState(&bitStream, &state);
-
-Finally, you must close the bitStream.
-The function returns the size of CStream in bytes.
-If data couldn't fit into dstBuffer, it will return a 0 ( == not compressible)
-If there is an error, it returns an errorCode (which can be tested using FSE_isError()).
-    size_t size = FSE_closeCStream(&bitStream);
-*/
-
-
-/******************************************
-*  FSE symbol decompression API
-******************************************/
-typedef struct
-{
-    size_t   bitContainer;
-    unsigned bitsConsumed;
-    const char* ptr;
-    const char* start;
-} FSE_DStream_t;
-
-typedef struct
-{
-    size_t      state;
-    const void* table;   /* precise table may vary, depending on U16 */
-} FSE_DState_t;
-
-
-size_t FSE_initDStream(FSE_DStream_t* bitD, const void* srcBuffer, size_t srcSize);
-void   FSE_initDState(FSE_DState_t* DStatePtr, FSE_DStream_t* bitD, const FSE_DTable* dt);
-
-unsigned char FSE_decodeSymbol(FSE_DState_t* DStatePtr, FSE_DStream_t* bitD);
-size_t        FSE_readBits(FSE_DStream_t* bitD, unsigned nbBits);
-unsigned int  FSE_reloadDStream(FSE_DStream_t* bitD);
-
-unsigned FSE_endOfDStream(const FSE_DStream_t* bitD);
-unsigned FSE_endOfDState(const FSE_DState_t* DStatePtr);
-
-typedef enum { FSE_DStream_unfinished = 0,
-               FSE_DStream_endOfBuffer = 1,
-               FSE_DStream_completed = 2,
-               FSE_DStream_tooFar = 3 } FSE_DStream_status;  /* result of FSE_reloadDStream() */
-               /* 1,2,4,8 would be better for bitmap combinations, but slows down performance a bit ... ?! */
-
-/*
-Let's now decompose FSE_decompress_usingDTable() into its unitary components.
-You will decode FSE-encoded symbols from the bitStream,
-and also any other bitFields you put in, **in reverse order**.
-
-You will need a few variables to track your bitStream. They are :
-
-FSE_DStream_t DStream;    // Stream context
-FSE_DState_t  DState;     // State context. Multiple ones are possible
-FSE_DTable*   DTablePtr;  // Decoding table, provided by FSE_buildDTable()
-
-The first thing to do is to init the bitStream.
-    errorCode = FSE_initDStream(&DStream, srcBuffer, srcSize);
-
-You should then retrieve your initial state(s)
-(in reverse flushing order if you have several ones) :
-    errorCode = FSE_initDState(&DState, &DStream, DTablePtr);
-
-You can then decode your data, symbol after symbol.
-For information the maximum number of bits read by FSE_decodeSymbol() is 'tableLog'.
-Keep in mind that symbols are decoded in reverse order, like a LIFO stack (last in, first out).
-    unsigned char symbol = FSE_decodeSymbol(&DState, &DStream);
-
-You can retrieve any bitfield you eventually stored into the bitStream (in reverse order)
-Note : maximum allowed nbBits is 25, for 32-bits compatibility
-    size_t bitField = FSE_readBits(&DStream, nbBits);
-
-All above operations only read from local register (which size depends on size_t).
-Refueling the register from memory is manually performed by the reload method.
-    endSignal = FSE_reloadDStream(&DStream);
-
-FSE_reloadDStream() result tells if there is still some more data to read from DStream.
-FSE_DStream_unfinished : there is still some data left into the DStream.
-FSE_DStream_endOfBuffer : Dstream reached end of buffer. Its container may no longer be completely filled.
-FSE_DStream_completed : Dstream reached its exact end, corresponding in general to decompression completed.
-FSE_DStream_tooFar : Dstream went too far. Decompression result is corrupted.
-
-When reaching end of buffer (FSE_DStream_endOfBuffer), progress slowly, notably if you decode multiple symbols per loop,
-to properly detect the exact end of stream.
-After each decoded symbol, check if DStream is fully consumed using this simple test :
-    FSE_reloadDStream(&DStream) >= FSE_DStream_completed
-
-When it's done, verify decompression is fully completed, by checking both DStream and the relevant states.
-Checking if DStream has reached its end is performed by :
-    FSE_endOfDStream(&DStream);
-Check also the states. There might be some symbols left there, if some high probability ones (>50%) are possible.
-    FSE_endOfDState(&DState);
-*/
-
-
-/******************************************
-*  FSE unsafe symbol API
-******************************************/
-size_t FSE_readBitsFast(FSE_DStream_t* bitD, unsigned nbBits);
-/* faster, but works only if nbBits >= 1 (otherwise, result will be corrupted) */
-
-unsigned char FSE_decodeSymbolFast(FSE_DState_t* DStatePtr, FSE_DStream_t* bitD);
-/* faster, but works only if allways nbBits >= 1 (otherwise, result will be corrupted) */
-
-
-#if defined (__cplusplus)
-}
-#endif