extzstd 0.0.2.CONCEPT-x86-mingw32 → 0.0.3.CONCEPT-x86-mingw32

data/contrib/zstd/common/entropy_common.c

@@ -0,0 +1,231 @@
+/*
+   Common functions of New Generation Entropy library
+   Copyright (C) 2016, Yann Collet.
+
+   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+       * Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above
+   copyright notice, this list of conditions and the following disclaimer
+   in the documentation and/or other materials provided with the
+   distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+    You can contact the author at :
+    - FSE+HUF source repository : https://github.com/Cyan4973/FiniteStateEntropy
+    - Public forum : https://groups.google.com/forum/#!forum/lz4c
+*************************************************************************** */
+
+/* *************************************
+*  Dependencies
+***************************************/
+#include "mem.h"
+#include "error_private.h"       /* ERR_*, ERROR */
+#define FSE_STATIC_LINKING_ONLY  /* FSE_MIN_TABLELOG */
+#include "fse.h"   /* FSE_isError, FSE_getErrorName */
+#define HUF_STATIC_LINKING_ONLY  /* HUF_TABLELOG_ABSOLUTEMAX */
+#include "huf.h"   /* HUF_isError, HUF_getErrorName */
+
+
+
+/*-****************************************
+*  FSE Error Management
+******************************************/
+unsigned FSE_isError(size_t code) { return ERR_isError(code); }
+
+const char* FSE_getErrorName(size_t code) { return ERR_getErrorName(code); }
+
+
+/* **************************************************************
+*  HUF Error Management
+****************************************************************/
+unsigned HUF_isError(size_t code) { return ERR_isError(code); }
+
+const char* HUF_getErrorName(size_t code) { return ERR_getErrorName(code); }
+
+
+/*-**************************************************************
+*  FSE NCount encoding-decoding
+****************************************************************/
+static short FSE_abs(short a) { return a<0 ? -a : a; }
+
+size_t FSE_readNCount (short* normalizedCounter, unsigned* maxSVPtr, unsigned* tableLogPtr,
+                 const void* headerBuffer, size_t hbSize)
+{
+    const BYTE* const istart = (const BYTE*) headerBuffer;
+    const BYTE* const iend = istart + hbSize;
+    const BYTE* ip = istart;
+    int nbBits;
+    int remaining;
+    int threshold;
+    U32 bitStream;
+    int bitCount;
+    unsigned charnum = 0;
+    int previous0 = 0;
+
+    if (hbSize < 4) return ERROR(srcSize_wrong);
+    bitStream = MEM_readLE32(ip);
+    nbBits = (bitStream & 0xF) + FSE_MIN_TABLELOG;   /* extract tableLog */
+    if (nbBits > FSE_TABLELOG_ABSOLUTE_MAX) return ERROR(tableLog_tooLarge);
+    bitStream >>= 4;
+    bitCount = 4;
+    *tableLogPtr = nbBits;
+    remaining = (1<<nbBits)+1;
+    threshold = 1<<nbBits;
+    nbBits++;
+
+    while ((remaining>1) && (charnum<=*maxSVPtr)) {
+        if (previous0) {
+            unsigned n0 = charnum;
+            while ((bitStream & 0xFFFF) == 0xFFFF) {
+                n0+=24;
+                if (ip < iend-5) {
+                    ip+=2;
+                    bitStream = MEM_readLE32(ip) >> bitCount;
+                } else {
+                    bitStream >>= 16;
+                    bitCount+=16;
+            }   }
+            while ((bitStream & 3) == 3) {
+                n0+=3;
+                bitStream>>=2;
+                bitCount+=2;
+            }
+            n0 += bitStream & 3;
+            bitCount += 2;
+            if (n0 > *maxSVPtr) return ERROR(maxSymbolValue_tooSmall);
+            while (charnum < n0) normalizedCounter[charnum++] = 0;
+            if ((ip <= iend-7) || (ip + (bitCount>>3) <= iend-4)) {
+                ip += bitCount>>3;
+                bitCount &= 7;
+                bitStream = MEM_readLE32(ip) >> bitCount;
+            }
+            else
+                bitStream >>= 2;
+        }
+        {   short const max = (short)((2*threshold-1)-remaining);
+            short count;
+
+            if ((bitStream & (threshold-1)) < (U32)max) {
+                count = (short)(bitStream & (threshold-1));
+                bitCount   += nbBits-1;
+            } else {
+                count = (short)(bitStream & (2*threshold-1));
+                if (count >= threshold) count -= max;
+                bitCount   += nbBits;
+            }
+
+            count--;   /* extra accuracy */
+            remaining -= FSE_abs(count);
+            normalizedCounter[charnum++] = count;
+            previous0 = !count;
+            while (remaining < threshold) {
+                nbBits--;
+                threshold >>= 1;
+            }
+
+            if ((ip <= iend-7) || (ip + (bitCount>>3) <= iend-4)) {
+                ip += bitCount>>3;
+                bitCount &= 7;
+            } else {
+                bitCount -= (int)(8 * (iend - 4 - ip));
+                ip = iend - 4;
+            }
+            bitStream = MEM_readLE32(ip) >> (bitCount & 31);
+    }   }   /* while ((remaining>1) && (charnum<=*maxSVPtr)) */
+    if (remaining != 1) return ERROR(GENERIC);
+    *maxSVPtr = charnum-1;
+
+    ip += (bitCount+7)>>3;
+    if ((size_t)(ip-istart) > hbSize) return ERROR(srcSize_wrong);
+    return ip-istart;
+}
+
+
+/*! HUF_readStats() :
+    Read compact Huffman tree, saved by HUF_writeCTable().
+    `huffWeight` is destination buffer.
+    @return : size read from `src` , or an error Code .
+    Note : Needed by HUF_readCTable() and HUF_readDTableXn() .
+*/
+size_t HUF_readStats(BYTE* huffWeight, size_t hwSize, U32* rankStats,
+                     U32* nbSymbolsPtr, U32* tableLogPtr,
+                     const void* src, size_t srcSize)
+{
+    U32 weightTotal;
+    const BYTE* ip = (const BYTE*) src;
+    size_t iSize = ip[0];
+    size_t oSize;
+
+    //memset(huffWeight, 0, hwSize);   /* is not necessary, even though some analyzer complain ... */
+
+    if (iSize >= 128)  { /* special header */
+        if (iSize >= (242)) {  /* RLE */
+            static U32 l[14] = { 1, 2, 3, 4, 7, 8, 15, 16, 31, 32, 63, 64, 127, 128 };
+            oSize = l[iSize-242];
+            memset(huffWeight, 1, hwSize);
+            iSize = 0;
+        }
+        else {   /* Incompressible */
+            oSize = iSize - 127;
+            iSize = ((oSize+1)/2);
+            if (iSize+1 > srcSize) return ERROR(srcSize_wrong);
+            if (oSize >= hwSize) return ERROR(corruption_detected);
+            ip += 1;
+            {   U32 n;
+                for (n=0; n<oSize; n+=2) {
+                    huffWeight[n]   = ip[n/2] >> 4;
+                    huffWeight[n+1] = ip[n/2] & 15;
+    }   }   }   }
+    else  {   /* header compressed with FSE (normal case) */
+        if (iSize+1 > srcSize) return ERROR(srcSize_wrong);
+        oSize = FSE_decompress(huffWeight, hwSize-1, ip+1, iSize);   /* max (hwSize-1) values decoded, as last one is implied */
+        if (FSE_isError(oSize)) return oSize;
+    }
+
+    /* collect weight stats */
+    memset(rankStats, 0, (HUF_TABLELOG_ABSOLUTEMAX + 1) * sizeof(U32));
+    weightTotal = 0;
+    {   U32 n; for (n=0; n<oSize; n++) {
+            if (huffWeight[n] >= HUF_TABLELOG_ABSOLUTEMAX) return ERROR(corruption_detected);
+            rankStats[huffWeight[n]]++;
+            weightTotal += (1 << huffWeight[n]) >> 1;
+    }   }
+
+    /* get last non-null symbol weight (implied, total must be 2^n) */
+    {   U32 const tableLog = BIT_highbit32(weightTotal) + 1;
+        if (tableLog > HUF_TABLELOG_ABSOLUTEMAX) return ERROR(corruption_detected);
+        *tableLogPtr = tableLog;
+        /* determine last weight */
+        {   U32 const total = 1 << tableLog;
+            U32 const rest = total - weightTotal;
+            U32 const verif = 1 << BIT_highbit32(rest);
+            U32 const lastWeight = BIT_highbit32(rest) + 1;
+            if (verif != rest) return ERROR(corruption_detected);    /* last value must be a clean power of 2 */
+            huffWeight[oSize] = (BYTE)lastWeight;
+            rankStats[lastWeight]++;
+    }   }
+
+    /* check tree construction validity */
+    if ((rankStats[1] < 2) || (rankStats[1] & 1)) return ERROR(corruption_detected);   /* by construction : at least 2 elts of rank 1, must be even */
+
+    /* results */
+    *nbSymbolsPtr = (U32)(oSize+1);
+    return iSize+1;
+}

data/contrib/zstd/common/error_private.h

@@ -0,0 +1,125 @@
+/* ******************************************************************
+   Error codes and messages
+   Copyright (C) 2013-2016, Yann Collet
+
+   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+       * Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above
+   copyright notice, this list of conditions and the following disclaimer
+   in the documentation and/or other materials provided with the
+   distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+   You can contact the author at :
+   - Homepage : http://www.zstd.net
+****************************************************************** */
+/* Note : this module is expected to remain private, do not expose it */
+
+#ifndef ERROR_H_MODULE
+#define ERROR_H_MODULE
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+
+/* ****************************************
+*  Dependencies
+******************************************/
+#include <stddef.h>        /* size_t */
+#include "error_public.h"  /* enum list */
+
+
+/* ****************************************
+*  Compiler-specific
+******************************************/
+#if defined(__GNUC__)
+#  define ERR_STATIC static __attribute__((unused))
+#elif defined (__cplusplus) || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */)
+#  define ERR_STATIC static inline
+#elif defined(_MSC_VER)
+#  define ERR_STATIC static __inline
+#else
+#  define ERR_STATIC static  /* this version may generate warnings for unused static functions; disable the relevant warning */
+#endif
+
+
+/*-****************************************
+*  Customization (error_public.h)
+******************************************/
+typedef ZSTD_ErrorCode ERR_enum;
+#define PREFIX(name) ZSTD_error_##name
+
+
+/*-****************************************
+*  Error codes handling
+******************************************/
+#ifdef ERROR
+#  undef ERROR   /* reported already defined on VS 2015 (Rich Geldreich) */
+#endif
+#define ERROR(name) ((size_t)-PREFIX(name))
+
+ERR_STATIC unsigned ERR_isError(size_t code) { return (code > ERROR(maxCode)); }
+
+ERR_STATIC ERR_enum ERR_getErrorCode(size_t code) { if (!ERR_isError(code)) return (ERR_enum)0; return (ERR_enum) (0-code); }
+
+
+/*-****************************************
+*  Error Strings
+******************************************/
+
+ERR_STATIC const char* ERR_getErrorString(ERR_enum code)
+{
+    static const char* notErrorCode = "Unspecified error code";
+    switch( code )
+    {
+    case PREFIX(no_error): return "No error detected";
+    case PREFIX(GENERIC):  return "Error (generic)";
+    case PREFIX(prefix_unknown): return "Unknown frame descriptor";
+    case PREFIX(frameParameter_unsupported): return "Unsupported frame parameter";
+    case PREFIX(frameParameter_unsupportedBy32bits): return "Frame parameter unsupported in 32-bits mode";
+    case PREFIX(compressionParameter_unsupported): return "Compression parameter is out of bound";
+    case PREFIX(init_missing): return "Context should be init first";
+    case PREFIX(memory_allocation): return "Allocation error : not enough memory";
+    case PREFIX(stage_wrong): return "Operation not authorized at current processing stage";
+    case PREFIX(dstSize_tooSmall): return "Destination buffer is too small";
+    case PREFIX(srcSize_wrong): return "Src size incorrect";
+    case PREFIX(corruption_detected): return "Corrupted block detected";
+    case PREFIX(checksum_wrong): return "Restored data doesn't match checksum";
+    case PREFIX(tableLog_tooLarge): return "tableLog requires too much memory : unsupported";
+    case PREFIX(maxSymbolValue_tooLarge): return "Unsupported max Symbol Value : too large";
+    case PREFIX(maxSymbolValue_tooSmall): return "Specified maxSymbolValue is too small";
+    case PREFIX(dictionary_corrupted): return "Dictionary is corrupted";
+    case PREFIX(dictionary_wrong): return "Dictionary mismatch";
+    case PREFIX(maxCode):
+    default: return notErrorCode;
+    }
+}
+
+ERR_STATIC const char* ERR_getErrorName(size_t code)
+{
+    return ERR_getErrorString(ERR_getErrorCode(code));
+}
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif /* ERROR_H_MODULE */

data/contrib/zstd/common/error_public.h

@@ -0,0 +1,77 @@
+/* ******************************************************************
+   Error codes list
+   Copyright (C) 2016, Yann Collet
+
+   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+       * Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above
+   copyright notice, this list of conditions and the following disclaimer
+   in the documentation and/or other materials provided with the
+   distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+   You can contact the author at :
+   - Homepage : http://www.zstd.net
+****************************************************************** */
+#ifndef ERROR_PUBLIC_H_MODULE
+#define ERROR_PUBLIC_H_MODULE
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+
+/* ****************************************
+*  error codes list
+******************************************/
+typedef enum {
+  ZSTD_error_no_error,
+  ZSTD_error_GENERIC,
+  ZSTD_error_prefix_unknown,
+  ZSTD_error_frameParameter_unsupported,
+  ZSTD_error_frameParameter_unsupportedBy32bits,
+  ZSTD_error_compressionParameter_unsupported,
+  ZSTD_error_init_missing,
+  ZSTD_error_memory_allocation,
+  ZSTD_error_stage_wrong,
+  ZSTD_error_dstSize_tooSmall,
+  ZSTD_error_srcSize_wrong,
+  ZSTD_error_corruption_detected,
+  ZSTD_error_checksum_wrong,
+  ZSTD_error_tableLog_tooLarge,
+  ZSTD_error_maxSymbolValue_tooLarge,
+  ZSTD_error_maxSymbolValue_tooSmall,
+  ZSTD_error_dictionary_corrupted,
+  ZSTD_error_dictionary_wrong,
+  ZSTD_error_maxCode
+} ZSTD_ErrorCode;
+
+/*! ZSTD_getErrorCode() :
+    convert a `size_t` function result into a `ZSTD_ErrorCode` enum type,
+    which can be used to compare directly with enum list published into "error_public.h" */
+ZSTD_ErrorCode ZSTD_getErrorCode(size_t functionResult);
+const char* ZSTD_getErrorString(ZSTD_ErrorCode code);
+
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif /* ERROR_PUBLIC_H_MODULE */

data/contrib/zstd/common/fse.h

@@ -0,0 +1,628 @@
+/* ******************************************************************
+   FSE : Finite State Entropy codec
+   Public Prototypes declaration
+   Copyright (C) 2013-2016, Yann Collet.
+
+   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+       * Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above
+   copyright notice, this list of conditions and the following disclaimer
+   in the documentation and/or other materials provided with the
+   distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+   You can contact the author at :
+   - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
+****************************************************************** */
+#ifndef FSE_H
+#define FSE_H
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+
+/*-*****************************************
+*  Dependencies
+******************************************/
+#include <stddef.h>    /* size_t, ptrdiff_t */
+
+
+/*-****************************************
+*  FSE simple functions
+******************************************/
+/*! FSE_compress() :
+    Compress content of buffer 'src', of size 'srcSize', into destination buffer 'dst'.
+    'dst' buffer must be already allocated. Compression runs faster is dstCapacity >= FSE_compressBound(srcSize).
+    @return : size of compressed data (<= dstCapacity).
+    Special values : if return == 0, srcData is not compressible => Nothing is stored within dst !!!
+                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression instead.
+                     if FSE_isError(return), compression failed (more details using FSE_getErrorName())
+*/
+size_t FSE_compress(void* dst, size_t dstCapacity,
+              const void* src, size_t srcSize);
+
+/*! FSE_decompress():
+    Decompress FSE data from buffer 'cSrc', of size 'cSrcSize',
+    into already allocated destination buffer 'dst', of size 'dstCapacity'.
+    @return : size of regenerated data (<= maxDstSize),
+              or an error code, which can be tested using FSE_isError() .
+
+    ** Important ** : FSE_decompress() does not decompress non-compressible nor RLE data !!!
+    Why ? : making this distinction requires a header.
+    Header management is intentionally delegated to the user layer, which can better manage special cases.
+*/
+size_t FSE_decompress(void* dst,  size_t dstCapacity,
+                const void* cSrc, size_t cSrcSize);
+
+
+/*-*****************************************
+*  Tool functions
+******************************************/
+size_t FSE_compressBound(size_t size);       /* maximum compressed size */
+
+/* Error Management */
+unsigned    FSE_isError(size_t code);        /* tells if a return value is an error code */
+const char* FSE_getErrorName(size_t code);   /* provides error code string (useful for debugging) */
+
+
+/*-*****************************************
+*  FSE advanced functions
+******************************************/
+/*! FSE_compress2() :
+    Same as FSE_compress(), but allows the selection of 'maxSymbolValue' and 'tableLog'
+    Both parameters can be defined as '0' to mean : use default value
+    @return : size of compressed data
+    Special values : if return == 0, srcData is not compressible => Nothing is stored within cSrc !!!
+                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression.
+                     if FSE_isError(return), it's an error code.
+*/
+size_t FSE_compress2 (void* dst, size_t dstSize, const void* src, size_t srcSize, unsigned maxSymbolValue, unsigned tableLog);
+
+
+/*-*****************************************
+*  FSE detailed API
+******************************************/
+/*!
+FSE_compress() does the following:
+1. count symbol occurrence from source[] into table count[]
+2. normalize counters so that sum(count[]) == Power_of_2 (2^tableLog)
+3. save normalized counters to memory buffer using writeNCount()
+4. build encoding table 'CTable' from normalized counters
+5. encode the data stream using encoding table 'CTable'
+
+FSE_decompress() does the following:
+1. read normalized counters with readNCount()
+2. build decoding table 'DTable' from normalized counters
+3. decode the data stream using decoding table 'DTable'
+
+The following API allows targeting specific sub-functions for advanced tasks.
+For example, it's possible to compress several blocks using the same 'CTable',
+or to save and provide normalized distribution using external method.
+*/
+
+/* *** COMPRESSION *** */
+
+/*! FSE_count():
+    Provides the precise count of each byte within a table 'count'.
+    'count' is a table of unsigned int, of minimum size (*maxSymbolValuePtr+1).
+    *maxSymbolValuePtr will be updated if detected smaller than initial value.
+    @return : the count of the most frequent symbol (which is not identified).
+              if return == srcSize, there is only one symbol.
+              Can also return an error code, which can be tested with FSE_isError(). */
+size_t FSE_count(unsigned* count, unsigned* maxSymbolValuePtr, const void* src, size_t srcSize);
+
+/*! FSE_optimalTableLog():
+    dynamically downsize 'tableLog' when conditions are met.
+    It saves CPU time, by using smaller tables, while preserving or even improving compression ratio.
+    @return : recommended tableLog (necessarily <= 'maxTableLog') */
+unsigned FSE_optimalTableLog(unsigned maxTableLog, size_t srcSize, unsigned maxSymbolValue);
+
+/*! FSE_normalizeCount():
+    normalize counts so that sum(count[]) == Power_of_2 (2^tableLog)
+    'normalizedCounter' is a table of short, of minimum size (maxSymbolValue+1).
+    @return : tableLog,
+              or an errorCode, which can be tested using FSE_isError() */
+size_t FSE_normalizeCount(short* normalizedCounter, unsigned tableLog, const unsigned* count, size_t srcSize, unsigned maxSymbolValue);
+
+/*! FSE_NCountWriteBound():
+    Provides the maximum possible size of an FSE normalized table, given 'maxSymbolValue' and 'tableLog'.
+    Typically useful for allocation purpose. */
+size_t FSE_NCountWriteBound(unsigned maxSymbolValue, unsigned tableLog);
+
+/*! FSE_writeNCount():
+    Compactly save 'normalizedCounter' into 'buffer'.
+    @return : size of the compressed table,
+              or an errorCode, which can be tested using FSE_isError(). */
+size_t FSE_writeNCount (void* buffer, size_t bufferSize, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);
+
+
+/*! Constructor and Destructor of FSE_CTable.
+    Note that FSE_CTable size depends on 'tableLog' and 'maxSymbolValue' */
+typedef unsigned FSE_CTable;   /* don't allocate that. It's only meant to be more restrictive than void* */
+FSE_CTable* FSE_createCTable (unsigned tableLog, unsigned maxSymbolValue);
+void        FSE_freeCTable (FSE_CTable* ct);
+
+/*! FSE_buildCTable():
+    Builds `ct`, which must be already allocated, using FSE_createCTable().
+    @return : 0, or an errorCode, which can be tested using FSE_isError() */
+size_t FSE_buildCTable(FSE_CTable* ct, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);
+
+/*! FSE_compress_usingCTable():
+    Compress `src` using `ct` into `dst` which must be already allocated.
+    @return : size of compressed data (<= `dstCapacity`),
+              or 0 if compressed data could not fit into `dst`,
+              or an errorCode, which can be tested using FSE_isError() */
+size_t FSE_compress_usingCTable (void* dst, size_t dstCapacity, const void* src, size_t srcSize, const FSE_CTable* ct);
+
+/*!
+Tutorial :
+----------
+The first step is to count all symbols. FSE_count() does this job very fast.
+Result will be saved into 'count', a table of unsigned int, which must be already allocated, and have 'maxSymbolValuePtr[0]+1' cells.
+'src' is a table of bytes of size 'srcSize'. All values within 'src' MUST be <= maxSymbolValuePtr[0]
+maxSymbolValuePtr[0] will be updated, with its real value (necessarily <= original value)
+FSE_count() will return the number of occurrence of the most frequent symbol.
+This can be used to know if there is a single symbol within 'src', and to quickly evaluate its compressibility.
+If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError()).
+
+The next step is to normalize the frequencies.
+FSE_normalizeCount() will ensure that sum of frequencies is == 2 ^'tableLog'.
+It also guarantees a minimum of 1 to any Symbol with frequency >= 1.
+You can use 'tableLog'==0 to mean "use default tableLog value".
+If you are unsure of which tableLog value to use, you can ask FSE_optimalTableLog(),
+which will provide the optimal valid tableLog given sourceSize, maxSymbolValue, and a user-defined maximum (0 means "default").
+
+The result of FSE_normalizeCount() will be saved into a table,
+called 'normalizedCounter', which is a table of signed short.
+'normalizedCounter' must be already allocated, and have at least 'maxSymbolValue+1' cells.
+The return value is tableLog if everything proceeded as expected.
+It is 0 if there is a single symbol within distribution.
+If there is an error (ex: invalid tableLog value), the function will return an ErrorCode (which can be tested using FSE_isError()).
+
+'normalizedCounter' can be saved in a compact manner to a memory area using FSE_writeNCount().
+'buffer' must be already allocated.
+For guaranteed success, buffer size must be at least FSE_headerBound().
+The result of the function is the number of bytes written into 'buffer'.
+If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError(); ex : buffer size too small).
+
+'normalizedCounter' can then be used to create the compression table 'CTable'.
+The space required by 'CTable' must be already allocated, using FSE_createCTable().
+You can then use FSE_buildCTable() to fill 'CTable'.
+If there is an error, both functions will return an ErrorCode (which can be tested using FSE_isError()).
+
+'CTable' can then be used to compress 'src', with FSE_compress_usingCTable().
+Similar to FSE_count(), the convention is that 'src' is assumed to be a table of char of size 'srcSize'
+The function returns the size of compressed data (without header), necessarily <= `dstCapacity`.
+If it returns '0', compressed data could not fit into 'dst'.
+If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError()).
+*/
+
+
+/* *** DECOMPRESSION *** */
+
+/*! FSE_readNCount():
+    Read compactly saved 'normalizedCounter' from 'rBuffer'.
+    @return : size read from 'rBuffer',
+              or an errorCode, which can be tested using FSE_isError().
+              maxSymbolValuePtr[0] and tableLogPtr[0] will also be updated with their respective values */
+size_t FSE_readNCount (short* normalizedCounter, unsigned* maxSymbolValuePtr, unsigned* tableLogPtr, const void* rBuffer, size_t rBuffSize);
+
+/*! Constructor and Destructor of FSE_DTable.
+    Note that its size depends on 'tableLog' */
+typedef unsigned FSE_DTable;   /* don't allocate that. It's just a way to be more restrictive than void* */
+FSE_DTable* FSE_createDTable(unsigned tableLog);
+void        FSE_freeDTable(FSE_DTable* dt);
+
+/*! FSE_buildDTable():
+    Builds 'dt', which must be already allocated, using FSE_createDTable().
+    return : 0, or an errorCode, which can be tested using FSE_isError() */
+size_t FSE_buildDTable (FSE_DTable* dt, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);
+
+/*! FSE_decompress_usingDTable():
+    Decompress compressed source `cSrc` of size `cSrcSize` using `dt`
+    into `dst` which must be already allocated.
+    @return : size of regenerated data (necessarily <= `dstCapacity`),
+              or an errorCode, which can be tested using FSE_isError() */
+size_t FSE_decompress_usingDTable(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, const FSE_DTable* dt);
+
+/*!
+Tutorial :
+----------
+(Note : these functions only decompress FSE-compressed blocks.
+ If block is uncompressed, use memcpy() instead
+ If block is a single repeated byte, use memset() instead )
+
+The first step is to obtain the normalized frequencies of symbols.
+This can be performed by FSE_readNCount() if it was saved using FSE_writeNCount().
+'normalizedCounter' must be already allocated, and have at least 'maxSymbolValuePtr[0]+1' cells of signed short.
+In practice, that means it's necessary to know 'maxSymbolValue' beforehand,
+or size the table to handle worst case situations (typically 256).
+FSE_readNCount() will provide 'tableLog' and 'maxSymbolValue'.
+The result of FSE_readNCount() is the number of bytes read from 'rBuffer'.
+Note that 'rBufferSize' must be at least 4 bytes, even if useful information is less than that.
+If there is an error, the function will return an error code, which can be tested using FSE_isError().
+
+The next step is to build the decompression tables 'FSE_DTable' from 'normalizedCounter'.
+This is performed by the function FSE_buildDTable().
+The space required by 'FSE_DTable' must be already allocated using FSE_createDTable().
+If there is an error, the function will return an error code, which can be tested using FSE_isError().
+
+`FSE_DTable` can then be used to decompress `cSrc`, with FSE_decompress_usingDTable().
+`cSrcSize` must be strictly correct, otherwise decompression will fail.
+FSE_decompress_usingDTable() result will tell how many bytes were regenerated (<=`dstCapacity`).
+If there is an error, the function will return an error code, which can be tested using FSE_isError(). (ex: dst buffer too small)
+*/
+
+
+#ifdef FSE_STATIC_LINKING_ONLY
+
+/* *** Dependency *** */
+#include "bitstream.h"
+
+
+/* *****************************************
+*  Static allocation
+*******************************************/
+/* FSE buffer bounds */
+#define FSE_NCOUNTBOUND 512
+#define FSE_BLOCKBOUND(size) (size + (size>>7))
+#define FSE_COMPRESSBOUND(size) (FSE_NCOUNTBOUND + FSE_BLOCKBOUND(size))   /* Macro version, useful for static allocation */
+
+/* It is possible to statically allocate FSE CTable/DTable as a table of unsigned using below macros */
+#define FSE_CTABLE_SIZE_U32(maxTableLog, maxSymbolValue)   (1 + (1<<(maxTableLog-1)) + ((maxSymbolValue+1)*2))
+#define FSE_DTABLE_SIZE_U32(maxTableLog)                   (1 + (1<<maxTableLog))
+
+
+/* *****************************************
+*  FSE advanced API
+*******************************************/
+size_t FSE_countFast(unsigned* count, unsigned* maxSymbolValuePtr, const void* src, size_t srcSize);
+/**< same as FSE_count(), but blindly trusts that all byte values within src are <= *maxSymbolValuePtr  */
+
+unsigned FSE_optimalTableLog_internal(unsigned maxTableLog, size_t srcSize, unsigned maxSymbolValue, unsigned minus);
+/**< same as FSE_optimalTableLog(), which used `minus==2` */
+
+size_t FSE_buildCTable_raw (FSE_CTable* ct, unsigned nbBits);
+/**< build a fake FSE_CTable, designed to not compress an input, where each symbol uses nbBits */
+
+size_t FSE_buildCTable_rle (FSE_CTable* ct, unsigned char symbolValue);
+/**< build a fake FSE_CTable, designed to compress always the same symbolValue */
+
+size_t FSE_buildDTable_raw (FSE_DTable* dt, unsigned nbBits);
+/**< build a fake FSE_DTable, designed to read an uncompressed bitstream where each symbol uses nbBits */
+
+size_t FSE_buildDTable_rle (FSE_DTable* dt, unsigned char symbolValue);
+/**< build a fake FSE_DTable, designed to always generate the same symbolValue */
+
+
+/* *****************************************
+*  FSE symbol compression API
+*******************************************/
+/*!
+   This API consists of small unitary functions, which highly benefit from being inlined.
+   You will want to enable link-time-optimization to ensure these functions are properly inlined in your binary.
+   Visual seems to do it automatically.
+   For gcc or clang, you'll need to add -flto flag at compilation and linking stages.
+   If none of these solutions is applicable, include "fse.c" directly.
+*/
+typedef struct
+{
+    ptrdiff_t   value;
+    const void* stateTable;
+    const void* symbolTT;
+    unsigned    stateLog;
+} FSE_CState_t;
+
+static void FSE_initCState(FSE_CState_t* CStatePtr, const FSE_CTable* ct);
+
+static void FSE_encodeSymbol(BIT_CStream_t* bitC, FSE_CState_t* CStatePtr, unsigned symbol);
+
+static void FSE_flushCState(BIT_CStream_t* bitC, const FSE_CState_t* CStatePtr);
+
+/**<
+These functions are inner components of FSE_compress_usingCTable().
+They allow the creation of custom streams, mixing multiple tables and bit sources.
+
+A key property to keep in mind is that encoding and decoding are done **in reverse direction**.
+So the first symbol you will encode is the last you will decode, like a LIFO stack.
+
+You will need a few variables to track your CStream. They are :
+
+FSE_CTable    ct;         // Provided by FSE_buildCTable()
+BIT_CStream_t bitStream;  // bitStream tracking structure
+FSE_CState_t  state;      // State tracking structure (can have several)
+
+
+The first thing to do is to init bitStream and state.
+    size_t errorCode = BIT_initCStream(&bitStream, dstBuffer, maxDstSize);
+    FSE_initCState(&state, ct);
+
+Note that BIT_initCStream() can produce an error code, so its result should be tested, using FSE_isError();
+You can then encode your input data, byte after byte.
+FSE_encodeSymbol() outputs a maximum of 'tableLog' bits at a time.
+Remember decoding will be done in reverse direction.
+    FSE_encodeByte(&bitStream, &state, symbol);
+
+At any time, you can also add any bit sequence.
+Note : maximum allowed nbBits is 25, for compatibility with 32-bits decoders
+    BIT_addBits(&bitStream, bitField, nbBits);
+
+The above methods don't commit data to memory, they just store it into local register, for speed.
+Local register size is 64-bits on 64-bits systems, 32-bits on 32-bits systems (size_t).
+Writing data to memory is a manual operation, performed by the flushBits function.
+    BIT_flushBits(&bitStream);
+
+Your last FSE encoding operation shall be to flush your last state value(s).
+    FSE_flushState(&bitStream, &state);
+
+Finally, you must close the bitStream.
+The function returns the size of CStream in bytes.
+If data couldn't fit into dstBuffer, it will return a 0 ( == not compressible)
+If there is an error, it returns an errorCode (which can be tested using FSE_isError()).
+    size_t size = BIT_closeCStream(&bitStream);
+*/
+
+
+/* *****************************************
+*  FSE symbol decompression API
+*******************************************/
+typedef struct
+{
+    size_t      state;
+    const void* table;   /* precise table may vary, depending on U16 */
+} FSE_DState_t;
+
+
+static void     FSE_initDState(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD, const FSE_DTable* dt);
+
+static unsigned char FSE_decodeSymbol(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD);
+
+static unsigned FSE_endOfDState(const FSE_DState_t* DStatePtr);
+
+/**<
+Let's now decompose FSE_decompress_usingDTable() into its unitary components.
+You will decode FSE-encoded symbols from the bitStream,
+and also any other bitFields you put in, **in reverse order**.
+
+You will need a few variables to track your bitStream. They are :
+
+BIT_DStream_t DStream;    // Stream context
+FSE_DState_t  DState;     // State context. Multiple ones are possible
+FSE_DTable*   DTablePtr;  // Decoding table, provided by FSE_buildDTable()
+
+The first thing to do is to init the bitStream.
+    errorCode = BIT_initDStream(&DStream, srcBuffer, srcSize);
+
+You should then retrieve your initial state(s)
+(in reverse flushing order if you have several ones) :
+    errorCode = FSE_initDState(&DState, &DStream, DTablePtr);
+
+You can then decode your data, symbol after symbol.
+For information the maximum number of bits read by FSE_decodeSymbol() is 'tableLog'.
+Keep in mind that symbols are decoded in reverse order, like a LIFO stack (last in, first out).
+    unsigned char symbol = FSE_decodeSymbol(&DState, &DStream);
+
+You can retrieve any bitfield you eventually stored into the bitStream (in reverse order)
+Note : maximum allowed nbBits is 25, for 32-bits compatibility
+    size_t bitField = BIT_readBits(&DStream, nbBits);
+
+All above operations only read from local register (which size depends on size_t).
+Refueling the register from memory is manually performed by the reload method.
+    endSignal = FSE_reloadDStream(&DStream);
+
+BIT_reloadDStream() result tells if there is still some more data to read from DStream.
+BIT_DStream_unfinished : there is still some data left into the DStream.
+BIT_DStream_endOfBuffer : Dstream reached end of buffer. Its container may no longer be completely filled.
+BIT_DStream_completed : Dstream reached its exact end, corresponding in general to decompression completed.
+BIT_DStream_tooFar : Dstream went too far. Decompression result is corrupted.
+
+When reaching end of buffer (BIT_DStream_endOfBuffer), progress slowly, notably if you decode multiple symbols per loop,
+to properly detect the exact end of stream.
+After each decoded symbol, check if DStream is fully consumed using this simple test :
+    BIT_reloadDStream(&DStream) >= BIT_DStream_completed
+
+When it's done, verify decompression is fully completed, by checking both DStream and the relevant states.
+Checking if DStream has reached its end is performed by :
+    BIT_endOfDStream(&DStream);
+Check also the states. There might be some symbols left there, if some high probability ones (>50%) are possible.
+    FSE_endOfDState(&DState);
+*/
+
+
+/* *****************************************
+*  FSE unsafe API
+*******************************************/
+static unsigned char FSE_decodeSymbolFast(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD);
+/* faster, but works only if nbBits is always >= 1 (otherwise, result will be corrupted) */
+
+
+/* *****************************************
+*  Implementation of inlined functions
+*******************************************/
+typedef struct {
+    int deltaFindState;
+    U32 deltaNbBits;
+} FSE_symbolCompressionTransform; /* total 8 bytes */
+
+MEM_STATIC void FSE_initCState(FSE_CState_t* statePtr, const FSE_CTable* ct)
+{
+    const void* ptr = ct;
+    const U16* u16ptr = (const U16*) ptr;
+    const U32 tableLog = MEM_read16(ptr);
+    statePtr->value = (ptrdiff_t)1<<tableLog;
+    statePtr->stateTable = u16ptr+2;
+    statePtr->symbolTT = ((const U32*)ct + 1 + (tableLog ? (1<<(tableLog-1)) : 1));
+    statePtr->stateLog = tableLog;
+}
+
+
+/*! FSE_initCState2() :
+*   Same as FSE_initCState(), but the first symbol to include (which will be the last to be read)
+*   uses the smallest state value possible, saving the cost of this symbol */
+MEM_STATIC void FSE_initCState2(FSE_CState_t* statePtr, const FSE_CTable* ct, U32 symbol)
+{
+    FSE_initCState(statePtr, ct);
+    {   const FSE_symbolCompressionTransform symbolTT = ((const FSE_symbolCompressionTransform*)(statePtr->symbolTT))[symbol];
+        const U16* stateTable = (const U16*)(statePtr->stateTable);
+        U32 nbBitsOut  = (U32)((symbolTT.deltaNbBits + (1<<15)) >> 16);
+        statePtr->value = (nbBitsOut << 16) - symbolTT.deltaNbBits;
+        statePtr->value = stateTable[(statePtr->value >> nbBitsOut) + symbolTT.deltaFindState];
+    }
+}
+
+MEM_STATIC void FSE_encodeSymbol(BIT_CStream_t* bitC, FSE_CState_t* statePtr, U32 symbol)
+{
+    const FSE_symbolCompressionTransform symbolTT = ((const FSE_symbolCompressionTransform*)(statePtr->symbolTT))[symbol];
+    const U16* const stateTable = (const U16*)(statePtr->stateTable);
+    U32 nbBitsOut  = (U32)((statePtr->value + symbolTT.deltaNbBits) >> 16);
+    BIT_addBits(bitC, statePtr->value, nbBitsOut);
+    statePtr->value = stateTable[ (statePtr->value >> nbBitsOut) + symbolTT.deltaFindState];
+}
+
+MEM_STATIC void FSE_flushCState(BIT_CStream_t* bitC, const FSE_CState_t* statePtr)
+{
+    BIT_addBits(bitC, statePtr->value, statePtr->stateLog);
+    BIT_flushBits(bitC);
+}
+
+/*<=====    Decompression    =====>*/
+
+typedef struct {
+    U16 tableLog;
+    U16 fastMode;
+} FSE_DTableHeader;   /* sizeof U32 */
+
+typedef struct
+{
+    unsigned short newState;
+    unsigned char  symbol;
+    unsigned char  nbBits;
+} FSE_decode_t;   /* size == U32 */
+
+MEM_STATIC void FSE_initDState(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD, const FSE_DTable* dt)
+{
+    const void* ptr = dt;
+    const FSE_DTableHeader* const DTableH = (const FSE_DTableHeader*)ptr;
+    DStatePtr->state = BIT_readBits(bitD, DTableH->tableLog);
+    BIT_reloadDStream(bitD);
+    DStatePtr->table = dt + 1;
+}
+
+MEM_STATIC BYTE FSE_peekSymbol(const FSE_DState_t* DStatePtr)
+{
+    FSE_decode_t const DInfo = ((const FSE_decode_t*)(DStatePtr->table))[DStatePtr->state];
+    return DInfo.symbol;
+}
+
+MEM_STATIC void FSE_updateState(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD)
+{
+    FSE_decode_t const DInfo = ((const FSE_decode_t*)(DStatePtr->table))[DStatePtr->state];
+    U32 const nbBits = DInfo.nbBits;
+    size_t const lowBits = BIT_readBits(bitD, nbBits);
+    DStatePtr->state = DInfo.newState + lowBits;
+}
+
+MEM_STATIC BYTE FSE_decodeSymbol(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD)
+{
+    FSE_decode_t const DInfo = ((const FSE_decode_t*)(DStatePtr->table))[DStatePtr->state];
+    U32 const nbBits = DInfo.nbBits;
+    BYTE const symbol = DInfo.symbol;
+    size_t const lowBits = BIT_readBits(bitD, nbBits);
+
+    DStatePtr->state = DInfo.newState + lowBits;
+    return symbol;
+}
+
+/*! FSE_decodeSymbolFast() :
+    unsafe, only works if no symbol has a probability > 50% */
+MEM_STATIC BYTE FSE_decodeSymbolFast(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD)
+{
+    FSE_decode_t const DInfo = ((const FSE_decode_t*)(DStatePtr->table))[DStatePtr->state];
+    U32 const nbBits = DInfo.nbBits;
+    BYTE const symbol = DInfo.symbol;
+    size_t const lowBits = BIT_readBitsFast(bitD, nbBits);
+
+    DStatePtr->state = DInfo.newState + lowBits;
+    return symbol;
+}
+
+MEM_STATIC unsigned FSE_endOfDState(const FSE_DState_t* DStatePtr)
+{
+    return DStatePtr->state == 0;
+}
+
+
+
+#ifndef FSE_COMMONDEFS_ONLY
+
+/* **************************************************************
+*  Tuning parameters
+****************************************************************/
+/*!MEMORY_USAGE :
+*  Memory usage formula : N->2^N Bytes (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; etc.)
+*  Increasing memory usage improves compression ratio
+*  Reduced memory usage can improve speed, due to cache effect
+*  Recommended max value is 14, for 16KB, which nicely fits into Intel x86 L1 cache */
+#define FSE_MAX_MEMORY_USAGE 14
+#define FSE_DEFAULT_MEMORY_USAGE 13
+
+/*!FSE_MAX_SYMBOL_VALUE :
+*  Maximum symbol value authorized.
+*  Required for proper stack allocation */
+#define FSE_MAX_SYMBOL_VALUE 255
+
+
+/* **************************************************************
+*  template functions type & suffix
+****************************************************************/
+#define FSE_FUNCTION_TYPE BYTE
+#define FSE_FUNCTION_EXTENSION
+#define FSE_DECODE_TYPE FSE_decode_t
+
+
+#endif   /* !FSE_COMMONDEFS_ONLY */
+
+
+/* ***************************************************************
+*  Constants
+*****************************************************************/
+#define FSE_MAX_TABLELOG  (FSE_MAX_MEMORY_USAGE-2)
+#define FSE_MAX_TABLESIZE (1U<<FSE_MAX_TABLELOG)
+#define FSE_MAXTABLESIZE_MASK (FSE_MAX_TABLESIZE-1)
+#define FSE_DEFAULT_TABLELOG (FSE_DEFAULT_MEMORY_USAGE-2)
+#define FSE_MIN_TABLELOG 5
+
+#define FSE_TABLELOG_ABSOLUTE_MAX 15
+#if FSE_MAX_TABLELOG > FSE_TABLELOG_ABSOLUTE_MAX
+#  error "FSE_MAX_TABLELOG > FSE_TABLELOG_ABSOLUTE_MAX is not supported"
+#endif
+
+#define FSE_TABLESTEP(tableSize) ((tableSize>>1) + (tableSize>>3) + 3)
+
+
+#endif /* FSE_STATIC_LINKING_ONLY */
+
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif  /* FSE_H */