exiftool_vendored 10.04.0 → 10.23.0

data/bin/Image-ExifTool-10.04/lib/Image/ExifTool/OpenEXR.pm

@@ -1,324 +0,0 @@
-#------------------------------------------------------------------------------
-# File:         OpenEXR.pm
-#
-# Description:  Read OpenEXR meta information
-#
-# Revisions:    2011/12/10 - P. Harvey Created
-#
-# References:   1) http://www.openexr.com/
-#------------------------------------------------------------------------------
-
-package Image::ExifTool::OpenEXR;
-
-use strict;
-use vars qw($VERSION);
-use Image::ExifTool qw(:DataAccess :Utils);
-
-$VERSION = '1.01';
-
-# supported EXR value format types (other types are extracted as undef binary data)
-my %formatType = (
-    box2f          => 'float[4]',
-    box2i          => 'int32s[4]',
-    chlist         => 1,
-    chromaticities => 'float[8]',
-    compression    => 'int8u',
-    double         => 'double',
-    envmap         => 'int8u',
-    float          => 'float',
-   'int'           => 'int32s',
-    keycode        => 'int32s[7]',
-    lineOrder      => 'int8u',
-    m33f           => 'float[9]',
-    m44f           => 'float[16]',
-    rational       => 'rational64s',
-    string         => 'string', # incorrect in specification! (no leading int)
-    stringvector   => 1,
-    tiledesc       => 1,
-    timecode       => 'int32u[2]',
-    v2f            => 'float[2]',
-    v2i            => 'int32s[2]',
-    v3f            => 'float[3]',
-    v3i            => 'int32s[3]',
-);
-
-# OpenEXR tags
-%Image::ExifTool::OpenEXR::Main = (
-    GROUPS => { 2 => 'Image' },
-    NOTES => q{
-        Information extracted from EXR images.  See L<http://www.openexr.com/> for
-        the official specification.
-    },
-    _ver => { Name => 'EXRVersion' },
-    _lay => {
-        Name => 'Layout',
-        PrintHex => 1,
-        PrintConv => { 0 => 'Scan Lines', 0x200 => 'Tiles' },
-    },
-    adoptedNeutral      => { },
-    altitude => {
-        Name => 'GPSAltitude',
-        Groups => { 2 => 'Location' },
-        PrintConv => q{
-            $val = int($val * 10) / 10;
-            return ($val =~ s/^-// ? "$val m Below" : "$val m Above") . " Sea Level";
-        },
-    },
-    aperture            => { PrintConv => 'sprintf("%.1f",$val)' },
-    channels            => { },
-    chromaticities      => { },
-    capDate => {
-        Name => 'DateTimeOriginal',
-        Groups => { 2 => 'Time' },
-        PrintConv => '$self->ConvertDateTime($val)',
-    },
-    comments            => { },
-    compression => {
-        PrintConvColumns => 2,
-        PrintConv => {
-            0 => 'None',
-            1 => 'RLE',
-            2 => 'ZIPS',
-            3 => 'ZIP',
-            4 => 'PIZ',
-            5 => 'PXR24',
-            6 => 'B44',
-            7 => 'B44A',
-        },
-    },
-    dataWindow          => { },
-    displayWindow       => { },
-    envmap => {
-        Name => 'EnvironmentMap',
-        PrintConv => {
-            0 => 'Latitude/Longitude',
-            1 => 'Cube',
-        },
-    },
-    expTime => {
-        Name => 'ExposureTime',
-        PrintConv => 'Image::ExifTool::Exif::PrintExposureTime($val)',
-    },
-    focus => {
-        Name => 'FocusDistance',
-        PrintConv => '"$val m"',
-    },
-    framesPerSecond     => { },
-    keyCode             => { },
-    isoSpeed            => { Name => 'ISO' },
-    latitude => {
-        Name => 'GPSLatitude',
-        Groups => { 2 => 'Location' },
-        RawConv => 'require Image::ExifTool::GPS; $val', # to load Composite tags and routines
-        PrintConv => 'Image::ExifTool::GPS::ToDMS($self, $val, 1, "N")',
-    },
-    lineOrder => {
-        PrintConv => {
-            0 => 'Increasing Y',
-            1 => 'Decreasing Y',
-            2 => 'Random Y',
-        },
-    },
-    longitude => {
-        Name => 'GPSLongitude',
-        Groups => { 2 => 'Location' },
-        RawConv => 'require Image::ExifTool::GPS; $val', # to load Composite tags and routines
-        PrintConv => 'Image::ExifTool::GPS::ToDMS($self, $val, 1, "E")',
-    },
-    lookModTransform    => { },
-    multiView           => { },
-    owner               => { Groups => { 2 => 'Author' } },
-    pixelAspectRatio    => { },
-    preview             => { },
-    renderingTransform  => { },
-    screenWindowCenter  => { },
-    screenWindowWidth   => { },
-    tiles               => { },
-    timeCode            => { },
-    utcOffset => {
-        Name => 'TimeZone',
-        Groups => { 2 => 'Time' },
-        PrintConv => 'TimeZoneString($val / 60)',
-    },
-    whiteLuminance      => { },
-    worldToCamera       => { },
-    worldToNDC          => { },
-    wrapmodes           => { Name => 'WrapModes' },
-    xDensity            => { Name => 'XResolution' },
-    # also observed:
-    # ilut
-);
-
-#------------------------------------------------------------------------------
-# Extract information from an OpenEXR file
-# Inputs: 0) ExifTool object reference, 1) DirInfo reference
-# Returns: 1 on success, 0 if this wasn't a valid OpenEXR file
-sub ProcessEXR($$)
-{
-    my ($et, $dirInfo) = @_;
-    my $raf = $$dirInfo{RAF};
-    my $verbose = $et->Options('Verbose');
-    my $binary = $et->Options('Binary') || $verbose;
-    my ($buff, $buf2, $dim);
-
-    # verify this is a valid RIFF file
-    return 0 unless $raf->Read($buff, 8) == 8;
-    return 0 unless $buff =~ /^\x76\x2f\x31\x01/s;
-    $et->SetFileType();
-    SetByteOrder('II');
-    my $tagTablePtr = GetTagTable('Image::ExifTool::OpenEXR::Main');
-
-    # extract information from header
-    my $ver = unpack('x4V', $buff);
-    $et->HandleTag($tagTablePtr, '_ver', $ver & 0xff);
-    $et->HandleTag($tagTablePtr, '_lay', $ver & 0x200);
-
-    # extract attributes
-    for (;;) {
-        $raf->Read($buff, 68) or last;
-        last if $buff =~ /^\0/;
-        unless ($buff =~ /^([^\0]{1,31})\0([^\0]{1,31})\0(.{4})/sg) {
-            $et->Warn('EXR format error');
-            last;
-        }
-        my ($tag, $type, $size) = ($1, $2, unpack('V', $3));
-        unless ($raf->Seek(pos($buff) - length($buff), 1)) {
-            $et->Warn('Seek error');
-            last;
-        }
-        my $tagInfo = $et->GetTagInfo($tagTablePtr, $tag);
-        unless ($tagInfo) {
-            my $name = ucfirst $tag;
-            $name =~ tr/-_a-zA-Z0-9//dc;
-            if (length $name <= 1) {
-                if (length $name) {
-                    $name = "Tag$name";
-                } else {
-                    $name = 'Invalid';
-                }
-            }
-            $tagInfo = { Name => $name, WasAdded => 1 };
-            AddTagToTable($tagTablePtr, $tag, $tagInfo);
-            $et->VPrint(0, $$et{INDENT}, "[adding $tag]\n");
-        }
-        my ($val, $success);
-        my $format = $formatType{$type};
-        if ($format or $binary) {
-            $raf->Read($buff, $size) == $size and $success = 1;
-            if (not $format) {
-                $val = \$buff;  # treat as undef binary data
-            } elsif ($format ne '1') {
-                # handle formats which map nicely into ExifTool format codes
-                if ($format =~ /^(\w+)\[?(\d*)/) {
-                    my ($fmt, $cnt) = ($1, $2);
-                    $cnt = $fmt eq 'string' ? $size : 1 unless $cnt;
-                    $val = ReadValue(\$buff, 0, $fmt, $cnt, $size);
-                }
-            # handle other format types
-            } elsif ($type eq 'tiledesc') {
-                if ($size >= 9) {
-                    my $x = Get32u(\$buff, 0);
-                    my $y = Get32u(\$buff, 4);
-                    my $mode = Get8u(\$buff, 8);
-                    my $lvl = { 0 => 'One Level', 1 => 'MIMAP Levels', 2 => 'RIPMAP Levels' }->{$mode & 0x0f};
-                    $lvl or $lvl = 'Unknown Levels (' . ($mode & 0xf) . ')';
-                    my $rnd = { 0 => 'Round Down', 1 => 'Round Up' }->{$mode >> 4};
-                    $rnd or $rnd = 'Unknown Rounding (' . ($mode >> 4) . ')';
-                    $val = "${x}x$y; $lvl; $rnd";
-                }
-            } elsif ($type eq 'chlist') {
-                $val = [ ];
-                while ($buff =~ /\G([^\0]{1,31})\0(.{16})/sg) {
-                    my ($str, $dat) = ($1, $2);
-                    my ($pix,$lin,$x,$y) = unpack('VCx3VV', $dat);
-                    $pix = { 0 => 'int8u', 1 => 'half', 2 => 'float' }->{$pix} || "unknown($pix)";
-                    push @$val, "$str $pix" . ($lin ? ' linear' : '') . " $x $y";
-                }
-            } elsif ($type eq 'stringvector') {
-                $val = [ ];
-                my $pos = 0;
-                while ($pos + 4 <= length($buff)) {
-                    my $len = Get32u(\$buff, $pos);
-                    last if $pos + 4 + $len > length($buff);
-                    push @$val, substr($buff, $pos + 4, $len);
-                    $pos += 4 + $len;
-                }
-            } else {
-                $val = \$buff;  # (shouldn't happen)
-            }
-        } else {
-            # avoid loading binary data
-            $val = \ "Binary data $size bytes";
-            $success = $raf->Seek($size, 1);
-        }
-        unless ($success) {
-            $et->Warn('Truncated or corrupted EXR file');
-            last;
-        }
-        $val = '<bad>' unless defined $val;
-
-        # take image dimensions from dataWindow (with displayWindow as backup)
-        if (($tag eq 'dataWindow' or (not $dim and $tag eq 'displayWindow')) and
-            $val =~ /^(-?\d+) (-?\d+) (-?\d+) (-?\d+)$/)
-        {
-            $dim = [$3 - $1 + 1, $4 - $2 + 1];
-        }
-        if ($verbose) {
-            my $dataPt = ref $val ? $val : \$val,
-            $et->VerboseInfo($tag, $tagInfo,
-                Table   => $tagTablePtr,
-                Value   => $val,
-                Size    => $size,
-                Format  => $type,
-                DataPt  => \$buff,
-                Addr    => $raf->Tell() - $size,
-            );
-        }
-        $et->FoundTag($tagInfo, $val);
-    }
-    if ($dim) {
-        $et->FoundTag('ImageWidth', $$dim[0]);
-        $et->FoundTag('ImageHeight', $$dim[1]);
-    }
-    return 1;
-}
-
-1;  # end
-
-__END__
-
-=head1 NAME
-
-Image::ExifTool::OpenEXR - Read OpenEXR meta information
-
-=head1 SYNOPSIS
-
-This module is used by Image::ExifTool
-
-=head1 DESCRIPTION
-
-This module contains definitions required by Image::ExifTool to extract meta
-information from OpenEXR images.
-
-=head1 AUTHOR
-
-Copyright 2003-2015, Phil Harvey (phil at owl.phy.queensu.ca)
-
-This library is free software; you can redistribute it and/or modify it
-under the same terms as Perl itself.
-
-=head1 REFERENCES
-
-=over 4
-
-=item L<http://www.openexr.com/documentation.html>
-
-=back
-
-=head1 SEE ALSO
-
-L<Image::ExifTool::TagNames/OpenEXR Tags>,
-L<Image::ExifTool(3pm)|Image::ExifTool>
-
-=cut
-

data/bin/Image-ExifTool-10.04/lib/Image/ExifTool/PDF.pm

@@ -1,2328 +0,0 @@
-#------------------------------------------------------------------------------
-# File:         PDF.pm
-#
-# Description:  Read PDF meta information
-#
-# Revisions:    07/11/2005 - P. Harvey Created
-#               07/25/2005 - P. Harvey Add support for encrypted documents
-#
-# References:   1) http://www.adobe.com/devnet/pdf/pdf_reference.html
-#               2) http://search.cpan.org/dist/Crypt-RC4/
-#               3) http://www.adobe.com/devnet/acrobat/pdfs/PDF32000_2008.pdf
-#               4) http://www.adobe.com/content/dam/Adobe/en/devnet/pdf/pdfs/adobe_supplement_iso32000.pdf
-#               5) http://tools.ietf.org/search/rfc3454
-#               6) http://www.armware.dk/RFC/rfc/rfc4013.html
-#------------------------------------------------------------------------------
-
-package Image::ExifTool::PDF;
-
-use strict;
-use vars qw($VERSION $AUTOLOAD $lastFetched);
-use Image::ExifTool qw(:DataAccess :Utils);
-require Exporter;
-
-$VERSION = '1.38';
-
-sub FetchObject($$$$);
-sub ExtractObject($$;$$);
-sub ReadToNested($;$);
-sub ProcessDict($$$$;$$);
-sub ProcessAcroForm($$$$;$$);
-sub ReadPDFValue($);
-sub CheckPDF($$$);
-
-# $lastFetched - last fetched object reference (used for decryption)
-#                (undefined if fetched object was already decrypted, eg. object from stream)
-
-my $cryptInfo;      # encryption object reference (plus additional information)
-my $cryptString;    # flag that strings are encrypted
-my $cryptStream;    # flag that streams are encrypted
-my $lastOffset;     # last fetched object offset
-my %streamObjs;     # hash of stream objects
-my %fetched;        # dicts fetched in verbose mode (to avoid cyclical recursion)
-my $pdfVer;         # version of PDF file being processed
-
-# filters supported in DecodeStream()
-my %supportedFilter = (
-    '/FlateDecode' => 1,
-    '/Crypt' => 1,
-    '/Identity' => 1,  # (not filtered)
-    '/DCTDecode' => 1, # (JPEG image - not filtered)
-    '/JPXDecode' => 1, # (Jpeg2000 image - not filtered)
-    '/LZWDecode' => 1, # (usually a bitmapped image)
-    '/ASCIIHexDecode' => 1,
-    # other standard filters that we currently don't support
-    #'/JBIG2Decode' => 0, # (JBIG2 image format not supported)
-    #'/CCITTFaxDecode' => 0,
-    #'/RunLengthDecode' => 0,
-    #'/ASCII85Decode' => 0,
-);
-
-# tags in main PDF directories
-%Image::ExifTool::PDF::Main = (
-    GROUPS => { 2 => 'Document' },
-    VARS => { CAPTURE => ['Main','Prev'] },
-    Info => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Info' },
-        # Adobe Acrobat 10.1.5 will create a duplicate Info dictionary with
-        # a different object number when metadata is edited.  This flag
-        # is part of a patch to ignore this duplicate information (unless
-        # the IgnoreMinorErrors option is used)
-        IgnoreDuplicates => 1,
-    },
-    Root => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Root' },
-    },
-    Encrypt => {
-        NoProcess => 1, # don't process normally (processed in advance)
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Encrypt' },
-    },
-    _linearized => {
-        Name => 'Linearized',
-        Notes => 'flag set if document is linearized for fast web display; not a real Tag ID',
-        PrintConv => { 'true' => 'Yes', 'false' => 'No' },
-    },
-);
-
-# tags in PDF Info dictionary
-%Image::ExifTool::PDF::Info = (
-    GROUPS => { 2 => 'Document' },
-    VARS => { CAPTURE => ['Info'] },
-    EXTRACT_UNKNOWN => 1, # extract all unknown tags in this directory
-    WRITE_PROC => \&Image::ExifTool::DummyWriteProc,
-    CHECK_PROC => \&CheckPDF,
-    WRITABLE => 'string',
-    # set PRIORITY to 0 so most recent Info dictionary takes precedence
-    # (Acrobat Pro bug? doesn't use same object/generation number for
-    #  new Info dictionary when doing incrmental update)
-    PRIORITY => 0,
-    NOTES => q{
-        As well as the tags listed below, the PDF specification allows for
-        user-defined tags to exist in the Info dictionary.  These tags, which should
-        have corresponding XMP-pdfx entries in the XMP of the PDF XML Metadata
-        object, are also extracted by ExifTool.
-
-        B<Writable> specifies the value format, and may be C<string>, C<date>,
-        C<integer>, C<real>, C<boolean> or C<name> for PDF tags.
-    },
-    Title       => { },
-    Author      => { Groups => { 2 => 'Author' } },
-    Subject     => { },
-    Keywords    => { List => 'string' },  # this is a string list
-    Creator     => { },
-    Producer    => { },
-    CreationDate => {
-        Name => 'CreateDate',
-        Writable => 'date',
-        Groups => { 2 => 'Time' },
-        Shift => 'Time',
-        PrintConv => '$self->ConvertDateTime($val)',
-        PrintConvInv => '$self->InverseDateTime($val)',
-    },
-    ModDate => {
-        Name => 'ModifyDate',
-        Writable => 'date',
-        Groups => { 2 => 'Time' },
-        Shift => 'Time',
-        PrintConv => '$self->ConvertDateTime($val)',
-        PrintConvInv => '$self->InverseDateTime($val)',
-    },
-    Trapped => {
-        Protected => 1,
-        # remove leading '/' from '/True' or '/False'
-        ValueConv => '$val=~s{^/}{}; $val',
-        ValueConvInv => '"/$val"',
-    },
-    'AAPL:Keywords' => { #PH
-        Name => 'AppleKeywords',
-        List => 'array', # this is an array of values
-        Notes => q{
-            keywords written by Apple utilities, although they seem to use PDF:Keywords
-            when reading
-        },
-    },
-);
-
-# tags in the PDF Root document catalog
-%Image::ExifTool::PDF::Root = (
-    GROUPS => { 2 => 'Document' },
-    # note: can't capture previous versions of Root since they are not parsed
-    VARS => { CAPTURE => ['Root'] },
-    NOTES => 'This is the PDF document catalog.',
-    MarkInfo => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::MarkInfo' },
-    },
-    Metadata => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Metadata' },
-    },
-    Pages => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Pages' },
-    },
-    Perms => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Perms' },
-    },
-    AcroForm => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::AcroForm' },
-    },
-    Lang       => 'Language',
-    PageLayout => { },
-    PageMode   => { },
-    Version    => 'PDFVersion',
-);
-
-# tags extracted from the PDF Encrypt dictionary
-%Image::ExifTool::PDF::Encrypt = (
-    GROUPS => { 2 => 'Document' },
-    NOTES => 'Tags extracted from the document Encrypt dictionary.',
-    Filter => {
-        Name => 'Encryption',
-        Notes => q{
-            extracted value is actually a combination of the Filter, SubFilter, V, R and
-            Length information from the Encrypt dictionary
-        },
-    },
-    P => {
-        Name => 'UserAccess',
-        ValueConv => '$val & 0x0f3c',  # ignore reserved bits
-        PrintConvColumns => 2,
-        PrintConv => { BITMASK => {
-            2 => 'Print',
-            3 => 'Modify',
-            4 => 'Copy',
-            5 => 'Annotate',
-            8 => 'Fill forms',
-            9 => 'Extract',
-            10 => 'Assemble',
-            11 => 'Print high-res',
-        }},
-    },
-);
-
-# tags in PDF Pages dictionary
-%Image::ExifTool::PDF::Pages = (
-    GROUPS => { 2 => 'Document' },
-    Count => 'PageCount',
-    Kids => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Kids' },
-    },
-);
-
-# tags in PDF Perms dictionary
-%Image::ExifTool::PDF::Perms = (
-    NOTES => 'Additional document permissions imposed by digital signatures.',
-    DocMDP => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Signature' },
-    },
-    FieldMDP => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Signature' },
-    },
-    UR3 => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Signature' },
-    },
-);
-
-# tags in PDF Perms dictionary
-%Image::ExifTool::PDF::AcroForm = (
-    PROCESS_PROC => \&ProcessAcroForm,
-    _has_xfa => {
-        Name => 'HasXFA',
-        Notes => q{
-            this tag is defined if a document contains form fields, and is true if it
-            uses XML Forms Architecture; not a real Tag ID
-        },
-        PrintConv => { 'true' => 'Yes', 'false' => 'No' },
-    },
-);
-
-# tags in PDF Kids dictionary
-%Image::ExifTool::PDF::Kids = (
-    Metadata => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Metadata' },
-    },
-    PieceInfo => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::PieceInfo' },
-    },
-    Resources => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Resources' },
-    },
-    Kids => {
-        Condition => '$self->Options("ExtractEmbedded")',
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Kids' },
-    },
-);
-
-# tags in PDF Resources dictionary
-%Image::ExifTool::PDF::Resources = (
-    ColorSpace => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::ColorSpace' },
-    },
-    XObject => {
-        Condition => '$self->Options("ExtractEmbedded")',
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::XObject' },
-    },
-    Properties => {
-        Condition => '$self->Options("ExtractEmbedded")',
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Properties' },
-    },
-);
-
-# tags in PDF ColorSpace dictionary
-%Image::ExifTool::PDF::ColorSpace = (
-    DefaultRGB => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::DefaultRGB' },
-    },
-    Cs1 => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Cs1' },
-    },
-);
-
-# tags in PDF DefaultRGB dictionary
-%Image::ExifTool::PDF::DefaultRGB = (
-    ICCBased => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::ICCBased' },
-    },
-);
-
-# tags in PDF Cs1 dictionary
-%Image::ExifTool::PDF::Cs1 = (
-    _stream => {
-        SubDirectory => { TagTable => 'Image::ExifTool::ICC_Profile::Main' },
-    },
-);
-
-# tags in PDF ICCBased dictionary
-%Image::ExifTool::PDF::ICCBased = (
-    _stream => {
-        SubDirectory => { TagTable => 'Image::ExifTool::ICC_Profile::Main' },
-    },
-);
-
-# tags in PDF XObject dictionary (parsed only if ExtractEmbedded is enabled)
-%Image::ExifTool::PDF::XObject = (
-    EXTRACT_UNKNOWN => 0,   # extract known but numbered tags (Im1, Im2, etc)
-    Im => {
-        Notes => q{
-            the ExtractEmbedded option enables information to be extracted from these
-            embedded images
-        },
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Im' },
-    },
-);
-
-# tags in PDF Im# dictionary
-%Image::ExifTool::PDF::Im = (
-    NOTES => q{
-        Information extracted from embedded images with the ExtractEmbedded option.
-        The EmbeddedImage and its metadata are extracted only for JPEG and Jpeg2000
-        image formats.
-    },
-    Width => 'EmbeddedImageWidth',
-    Height => 'EmbeddedImageHeight',
-    Filter => { Name => 'EmbeddedImageFilter', List => 1 },
-    ColorSpace => {
-        Name => 'EmbeddedImageColorSpace',
-        List => 1,
-        RawConv => 'ref $val ? undef : $val', # (ignore color space data)
-    },
-    Image_stream => {
-        Name => 'EmbeddedImage',
-        Groups => { 2 => 'Preview' },
-        Binary => 1,
-    },
-);
-
-# tags in PDF Properties dictionary
-%Image::ExifTool::PDF::Properties = (
-    EXTRACT_UNKNOWN => 0,   # extract known but numbered tags (MC0, MC1, etc)
-    MC => {
-        Notes => q{
-            the ExtractEmbedded option enables information to be extracted from these
-            embedded metadata dictionaries
-        },
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::MC' },
-    }
-);
-
-# tags in PDF MC# dictionary
-%Image::ExifTool::PDF::MC = (
-    Metadata => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Metadata' },
-    }
-);
-
-# tags in PDF PieceInfo dictionary
-%Image::ExifTool::PDF::PieceInfo = (
-    AdobePhotoshop => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::AdobePhotoshop' },
-    },
-    Illustrator => {
-        # assume this is an illustrator file if it contains this directory
-        # and doesn't have a ".PDF" extension
-        Condition => q{
-            $self->OverrideFileType("AI") unless $$self{FILE_EXT} and $$self{FILE_EXT} eq 'PDF';
-            return 1;
-        },
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Illustrator' },
-    },
-);
-
-# tags in PDF AdobePhotoshop dictionary
-%Image::ExifTool::PDF::AdobePhotoshop = (
-    Private => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Private' },
-    },
-);
-
-# tags in PDF Illustrator dictionary
-%Image::ExifTool::PDF::Illustrator = (
-    Private => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::AIPrivate' },
-    },
-);
-
-# tags in PDF Private dictionary
-%Image::ExifTool::PDF::Private = (
-    ImageResources => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::ImageResources' },
-    },
-);
-
-# tags in PDF AI Private dictionary
-%Image::ExifTool::PDF::AIPrivate = (
-    GROUPS => { 2 => 'Document' },
-    EXTRACT_UNKNOWN => 0,   # extract known but numbered tags
-    AIMetaData => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::AIMetaData' },
-    },
-    AIPrivateData => {
-        Notes => q{
-            the ExtractEmbedded option enables information to be extracted from embedded
-            PostScript documents in the AIPrivateData# and AIPDFPrivateData# streams
-        },
-        JoinStreams => 1,   # join streams from numbered tags and process as one
-        SubDirectory => { TagTable => 'Image::ExifTool::PostScript::Main' },
-    },
-    AIPDFPrivateData => {
-        JoinStreams => 1,   # join streams from numbered tags and process as one
-        SubDirectory => { TagTable => 'Image::ExifTool::PostScript::Main' },
-    },
-    RoundTripVersion => { },
-    ContainerVersion => { },
-    CreatorVersion => { },
-);
-
-# tags in PDF AIMetaData dictionary
-%Image::ExifTool::PDF::AIMetaData = (
-    _stream => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PostScript::Main' },
-    },
-);
-
-# tags in PDF ImageResources dictionary
-%Image::ExifTool::PDF::ImageResources = (
-    _stream => {
-        SubDirectory => { TagTable => 'Image::ExifTool::Photoshop::Main' },
-    },
-);
-
-# tags in PDF MarkInfo dictionary
-%Image::ExifTool::PDF::MarkInfo = (
-    GROUPS => { 2 => 'Document' },
-    Marked => {
-        Name => 'TaggedPDF',
-        Notes => "not a Tagged PDF if this tag is missing",
-        PrintConv => { 'true' => 'Yes', 'false' => 'No' },
-    },
-);
-
-# tags in PDF Metadata dictionary
-%Image::ExifTool::PDF::Metadata = (
-    GROUPS => { 2 => 'Document' },
-    XML_stream => { # this is the stream for a Subtype /XML dictionary (not a real tag)
-        Name => 'XMP',
-        SubDirectory => { TagTable => 'Image::ExifTool::XMP::Main' },
-    },
-);
-
-# tags in PDF signature directories (DocMDP, FieldMDP or UR3)
-%Image::ExifTool::PDF::Signature = (
-    GROUPS => { 2 => 'Document' },
-    ContactInfo => 'SignerContactInfo',
-    Location => 'SigningLocation',
-    M => {
-        Name => 'SigningDate',
-        Format => 'date',
-        Groups => { 2 => 'Time' },
-        PrintConv => '$self->ConvertDateTime($val)',
-    },
-    Name     => 'SigningAuthority',
-    Reason   => 'SigningReason',
-    Reference => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::Reference' },
-    },
-    Prop_AuthTime => {
-        Name => 'AuthenticationTime',
-        PrintConv => 'ConvertTimeSpan($val) . " ago"',
-    },
-    Prop_AuthType => 'AuthenticationType',
-);
-
-# tags in PDF Reference dictionary
-%Image::ExifTool::PDF::Reference = (
-    TransformParams => {
-        SubDirectory => { TagTable => 'Image::ExifTool::PDF::TransformParams' },
-    },
-);
-
-# tags in PDF TransformParams dictionary
-%Image::ExifTool::PDF::TransformParams = (
-    GROUPS => { 2 => 'Document' },
-    Annots => {
-        Name => 'AnnotationUsageRights',
-        Notes => q{
-            possible values are Create, Delete, Modify, Copy, Import and Export;
-            additional values for UR3 signatures are Online and SummaryView
-        },
-        List => 1,
-    },
-    Document => {
-        Name => 'DocumentUsageRights',
-        Notes => 'only possible value is FullSave',
-        List => 1,
-    },
-    Form => {
-        Name => 'FormUsageRights',
-        Notes => q{
-            possible values are FillIn, Import, Export, SubmitStandalone and
-            SpawnTemplate; additional values for UR3 signatures are BarcodePlaintext and
-            Online
-        },
-        List => 1,
-    },
-    FormEX => {
-        Name => 'FormExtraUsageRights',
-        Notes => 'UR signatures only; only possible value is BarcodePlaintext',
-        List => 1,
-    },
-    Signature => {
-        Name => 'SignatureUsageRights',
-        Notes => 'only possible value is Modify',
-        List => 1,
-    },
-    EF => {
-        Name => 'EmbeddedFileUsageRights',
-        Notes => 'possible values are Create, Delete, Modify and Import',
-        List => 1,
-    },
-    Msg => 'UsageRightsMessage',
-    P => {
-        Name => 'ModificationPermissions',
-        Notes => q{
-            1-3 for DocMDP signatures, default 2; true/false for UR3 signatures, default
-            false
-        },
-        PrintConv => {
-            1 => 'No changes permitted',
-            2 => 'Fill forms, Create page templates, Sign',
-            3 => 'Fill forms, Create page templates, Sign, Create/Delete/Edit annotations',
-            'true' => 'Restrict all applications to reader permissions',
-            'false' => 'Do not restrict applications to reader permissions',
-        },
-    },
-    Action => {
-        Name => 'FieldPermissions',
-        Notes => 'FieldMDP signatures only',
-        PrintConv => {
-            'All' => 'Disallow changes to all form fields',
-            'Include' => 'Disallow changes to specified form fields',
-            'Exclude' => 'Allow changes to specified form fields',
-        },
-    },
-    Fields => {
-        Notes => 'FieldMDP signatures only',
-        Name => 'FormFields',
-        List => 1,
-    },
-);
-
-# unknown tags for use in verbose option
-%Image::ExifTool::PDF::Unknown = (
-    GROUPS => { 2 => 'Unknown' },
-);
-
-#------------------------------------------------------------------------------
-# AutoLoad our writer routines when necessary
-#
-sub AUTOLOAD
-{
-    return Image::ExifTool::DoAutoLoad($AUTOLOAD, @_);
-}
-
-#------------------------------------------------------------------------------
-# Convert from PDF to EXIF-style date/time
-# Inputs: 0) PDF date/time string (D:YYYYmmddHHMMSS+HH'MM')
-# Returns: EXIF date string (YYYY:mm:dd HH:MM:SS+HH:MM)
-sub ConvertPDFDate($)
-{
-    my $date = shift;
-    # remove optional 'D:' prefix
-    $date =~ s/^D://;
-    # fill in default values if necessary
-    #              YYYYmmddHHMMSS
-    my $default = '00000101000000';
-    if (length $date < length $default) {
-        $date .= substr($default, length $date);
-    }
-    $date =~ /^(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d{2})(.*)/ or return $date;
-    $date = "$1:$2:$3 $4:$5:$6";
-    if ($7) {
-        my $tz = $7;
-        if ($tz =~ /^\s*Z/i) {
-            # ignore any "HH'mm'" after the Z (OS X 10.6 does this)
-            $date .= 'Z';
-        # tolerate some improper formatting in timezone specification
-        } elsif ($tz =~ /^\s*([-+])\s*(\d+)[': ]+(\d*)/) {
-            $date .= $1 . $2 . ':' . ($3 || '00');
-        }
-    }
-    return $date;
-}
-
-#------------------------------------------------------------------------------
-# Locate any object in the XRef tables (including compressed objects)
-# Inputs: 0) XRef reference, 1) object reference string (or free object number)
-# Returns: offset to object in file or compressed object reference string,
-#          0 if object is free, or undefined on error
-sub LocateAnyObject($$)
-{
-    my ($xref, $ref) = @_;
-    return undef unless $xref;
-    return $$xref{$ref} if exists $$xref{$ref};
-    # get the object number
-    return undef unless $ref =~ /^(\d+)/;
-    my $objNum = $1;
-    # return 0 if the object number has been reused (old object is free)
-    return 0 if defined $$xref{$objNum};
-#
-# scan our XRef stream dictionaries for this object
-#
-    return undef unless $$xref{dicts};
-    my $dict;
-    foreach $dict (@{$$xref{dicts}}) {
-        # quick check to see if the object is in the range for this xref stream
-        next if $objNum >= $$dict{Size};
-        my $index = $$dict{Index};
-        next if $objNum < $$index[0];
-        # scan the tables for the specified object
-        my $size = $$dict{_entry_size};
-        my $num = scalar(@$index) / 2;
-        my $tot = 0;
-        my $i;
-        for ($i=0; $i<$num; ++$i) {
-            my $start = $$index[$i*2];
-            my $count = $$index[$i*2+1];
-            # table is in ascending order, so quit if we have passed the object
-            last if $objNum < $start;
-            if ($objNum < $start + $count) {
-                my $offset = $size * ($objNum - $start + $tot);
-                last if $offset + $size > length $$dict{_stream};
-                my @c = unpack("x$offset C$size", $$dict{_stream});
-                # extract values from this table entry
-                # (can be 1, 2, 3, 4, etc.. bytes per value)
-                my (@t, $j, $k);
-                my $w = $$dict{W};
-                for ($j=0; $j<3; ++$j) {
-                    # use default value if W entry is 0 (as per spec)
-                    # - 0th element defaults to 1, others default to 0
-                    $$w[$j] or $t[$j] = ($j ? 0 : 1), next;
-                    $t[$j] = shift(@c);
-                    for ($k=1; $k < $$w[$j]; ++$k) {
-                        $t[$j] = 256 * $t[$j] + shift(@c);
-                    }
-                }
-                # by default, use "o g R" as the xref key
-                # (o = object number, g = generation number)
-                my $ref2 = "$objNum $t[2] R";
-                if ($t[0] == 1) {
-                    # normal object reference:
-                    # $t[1]=offset of object from start, $t[2]=generation number
-                    $$xref{$ref2} = $t[1];
-                } elsif ($t[0] == 2) {
-                    # compressed object reference:
-                    # $t[1]=stream object number, $t[2]=index of object in stream
-                    $ref2 = "$objNum 0 R";
-                    $$xref{$ref2} = "I$t[2] $t[1] 0 R";
-                } elsif ($t[0] == 0) {
-                    # free object:
-                    # $t[1]=next free object in linked list, $t[2]=generation number
-                    $$xref{$ref2} = 0;
-                } else {
-                    # treat as a null object
-                    $$xref{$ref2} = undef;
-                }
-                $$xref{$objNum} = $t[1];    # remember offsets by object number too
-                return $$xref{$ref} if $ref eq $ref2;
-                return 0;   # object is free or was reused
-            }
-            $tot += $count;
-        }
-    }
-    return undef;
-}
-
-#------------------------------------------------------------------------------
-# Locate a regular object in the XRef tables (does not include compressed objects)
-# Inputs: 0) XRef reference, 1) object reference string (or free object number)
-# Returns: offset to object in file, 0 if object is free,
-#          or undef on error or if object was compressed
-sub LocateObject($$)
-{
-    my ($xref, $ref) = @_;
-    my $offset = LocateAnyObject($xref, $ref);
-    return undef if $offset and $offset =~ /^I/;
-    return $offset;
-}
-
-#------------------------------------------------------------------------------
-# Fetch indirect object from file (from inside a stream if required)
-# Inputs: 0) ExifTool object reference, 1) object reference string,
-#         2) xref lookup, 3) object name (for warning messages)
-# Returns: object data or undefined on error
-# Notes: sets $lastFetched to the object reference, or undef if the object
-#        was extracted from an encrypted stream
-sub FetchObject($$$$)
-{
-    my ($et, $ref, $xref, $tag) = @_;
-    $lastFetched = $ref;    # save this for decoding if necessary
-    my $offset = LocateAnyObject($xref, $ref);
-    $lastOffset = $offset;
-    unless ($offset) {
-        $et->Warn("Bad $tag reference") unless defined $offset;
-        return undef;
-    }
-    my ($data, $obj);
-    if ($offset =~ s/^I(\d+) //) {
-        my $index = $1; # object index in stream
-        my ($objNum) = split ' ', $ref; # save original object number
-        $ref = $offset; # now a reference to the containing stream object
-        $obj = $streamObjs{$ref};
-        unless ($obj) {
-            # don't try to load the same object stream twice
-            return undef if defined $obj;
-            $streamObjs{$ref} = '';
-            # load the parent object stream
-            $obj = FetchObject($et, $ref, $xref, $tag);
-            # make sure it contains everything we need
-            return undef unless defined $obj and ref($obj) eq 'HASH';
-            return undef unless $$obj{First} and $$obj{N};
-            return undef unless DecodeStream($et, $obj);
-            # add a special '_table' entry to this dictionary which contains
-            # the list of object number/offset pairs from the stream header
-            my $num = $$obj{N} * 2;
-            my @table = split ' ', $$obj{_stream}, $num;
-            return undef unless @table == $num;
-            # remove everything before first object in stream
-            $$obj{_stream} = substr($$obj{_stream}, $$obj{First});
-            $table[$num-1] =~ s/^(\d+).*/$1/s;  # trim excess from last number
-            $$obj{_table} = \@table;
-            # save the object stream so we don't have to re-load it later
-            $streamObjs{$ref} = $obj;
-        }
-        # verify that we have the specified object
-        my $i = 2 * $index;
-        my $table = $$obj{_table};
-        unless ($index < $$obj{N} and $$table[$i] == $objNum) {
-            $et->Warn("Bad index for stream object $tag");
-            return undef;
-        }
-        # extract the object at the specified index in the stream
-        # (offsets in table are in sequential order, so we can subract from
-        #  the next offset to get the object length)
-        $offset = $$table[$i + 1];
-        my $len = ($$table[$i + 3] || length($$obj{_stream})) - $offset;
-        $data = substr($$obj{_stream}, $offset, $len);
-        # avoid re-decrypting data in already decrypted streams
-        undef $lastFetched if $cryptStream;
-        return ExtractObject($et, \$data);
-    }
-    my $raf = $$et{RAF};
-    $raf->Seek($offset, 0) or $et->Warn("Bad $tag offset"), return undef;
-    # verify that we are reading the expected object
-    $raf->ReadLine($data) or $et->Warn("Error reading $tag data"), return undef;
-    ($obj = $ref) =~ s/R/obj/;
-    unless ($data =~ s/^$obj//) {
-        $et->Warn("$tag object ($obj) not found at $offset");
-        return undef;
-    }
-    return ExtractObject($et, \$data, $raf, $xref);
-}
-
-#------------------------------------------------------------------------------
-# Convert PDF value to something readable
-# Inputs: 0) PDF object data
-# Returns: converted object
-sub ReadPDFValue($)
-{
-    my $str = shift;
-    # decode all strings in an array
-    if (ref $str eq 'ARRAY') {
-        # create new list to not alter the original data when rewriting
-        my ($val, @vals);
-        foreach $val (@$str) {
-            push @vals, ReadPDFValue($val);
-        }
-        return \@vals;
-    }
-    length $str or return $str;
-    my $delim = substr($str, 0, 1);
-    if ($delim eq '(') {    # literal string
-        $str = $1 if $str =~ /^.*?\((.*)\)/s;   # remove brackets
-        # decode escape sequences in literal strings
-        while ($str =~ /\\(.)/sg) {
-            my $n = pos($str) - 2;
-            my $c = $1;
-            my $r;
-            if ($c =~ /[0-7]/) {
-                # get up to 2 more octal digits
-                $c .= $1 if $str =~ /\G([0-7]{1,2})/g;
-                # convert octal escape code
-                $r = chr(oct($c) & 0xff);
-            } elsif ($c eq "\x0d") {
-                # the string is continued if the line ends with '\'
-                # (also remove "\x0d\x0a")
-                $c .= $1 if $str =~ /\G(\x0a)/g;
-                $r = '';
-            } elsif ($c eq "\x0a") {
-                $r = '';
-            } else {
-                # convert escaped characters
-                ($r = $c) =~ tr/nrtbf/\n\r\t\b\f/;
-            }
-            substr($str, $n, length($c)+1) = $r;
-            # continue search after this character
-            pos($str) = $n + length($r);
-        }
-        Crypt(\$str, $lastFetched) if $cryptString;
-    } elsif ($delim eq '<') {   # hex string
-        # decode hex data
-        $str =~ tr/0-9A-Fa-f//dc;
-        $str .= '0' if length($str) & 0x01; # (by the spec)
-        $str = pack('H*', $str);
-        Crypt(\$str, $lastFetched) if $cryptString;
-    } elsif ($delim eq '/') {   # name
-        $str = substr($str, 1);
-        # convert escape codes (PDF 1.2 or later)
-        $str =~ s/#([0-9a-f]{2})/chr(hex($1))/sgei if $pdfVer >= 1.2;
-    }
-    return $str;
-}
-
-#------------------------------------------------------------------------------
-# Extract PDF object from combination of buffered data and file
-# Inputs: 0) ExifTool object reference, 1) data reference,
-#         2) optional raf reference, 3) optional xref table
-# Returns: converted PDF object or undef on error
-#          a) dictionary object --> hash reference
-#          b) array object --> array reference
-#          c) indirect reference --> scalar reference
-#          d) string, name, integer, boolean, null --> scalar value
-# - updates $$dataPt on return to contain unused data
-# - creates two bogus entries ('_stream' and '_tags') in dictionaries to represent
-#   the stream data and a list of the tags (not including '_stream' and '_tags')
-#   in their original order
-sub ExtractObject($$;$$)
-{
-    my ($et, $dataPt, $raf, $xref) = @_;
-    my (@tags, $data, $objData);
-    my $dict = { };
-    my $delim;
-
-    for (;;) {
-        if ($$dataPt =~ /^\s*(<{1,2}|\[|\()/s) {
-            $delim = $1;
-            $$dataPt =~ s/^\s+//;   # remove leading white space
-            $objData = ReadToNested($dataPt, $raf);
-            return undef unless defined $objData;
-            last;
-        } elsif ($$dataPt =~ s{^\s*(\S[^[(/<>\s]*)\s*}{}s) {
-#
-# extract boolean, numerical, string, name, null object or indirect reference
-#
-            $objData = $1;
-            # look for an indirect reference
-            if ($objData =~ /^\d+$/ and $$dataPt =~ s/^(\d+)\s+R//s) {
-                $objData .= "$1 R";
-                $objData = \$objData;   # return scalar reference
-            }
-            return $objData;    # return simple scalar or scalar reference
-        }
-        $raf and $raf->ReadLine($data) or return undef;
-        $$dataPt .= $data;
-    }
-#
-# return literal string or hex string without parsing
-#
-    if ($delim eq '(' or $delim eq '<') {
-        return $objData;
-#
-# extract array
-#
-    } elsif ($delim eq '[') {
-        $objData =~ /^.*?\[(.*)\]/s or return undef;
-        my $data = $1;    # brackets removed
-        my @list;
-        for (;;) {
-            last unless $data =~ m{\s*(\S[^[(/<>\s]*)}sg;
-            my $val = $1;
-            if ($val =~ /^(<{1,2}|\[|\()/) {
-                my $pos = pos($data) - length($val);
-                # nested dict, array, literal string or hex string
-                my $buff = substr($data, $pos);
-                $val = ReadToNested(\$buff);
-                last unless defined $val;
-                pos($data) = $pos + length($val);
-                $val = ExtractObject($et, \$val);
-            } elsif ($val =~ /^\d/) {
-                my $pos = pos($data);
-                if ($data =~ /\G\s+(\d+)\s+R/g) {
-                    $val = \ "$val $1 R";   # make a reference
-                } else {
-                    pos($data) = $pos;
-                }
-            }
-            push @list, $val;
-        }
-        return \@list;
-    }
-#
-# extract dictionary
-#
-    # Note: entries are not necessarily separated by whitespace (doh!)
-    # eg) "/Tag/Name", "/Tag(string)", "/Tag[array]", etc are legal!
-    # Also, they may be separated by a comment (eg. "/Tag%comment\nValue"),
-    # but comments have already been removed
-    while ($objData =~ m{(\s*)/([^/[\]()<>{}\s]+)\s*(\S[^[(/<>\s]*)}sg) {
-        my $tag = $2;
-        my $val = $3;
-        if ($val =~ /^(<{1,2}|\[|\()/) {
-            # nested dict, array, literal string or hex string
-            $objData = substr($objData, pos($objData)-length($val));
-            $val = ReadToNested(\$objData, $raf);
-            last unless defined $val;
-            $val = ExtractObject($et, \$val);
-            pos($objData) = 0;
-        } elsif ($val =~ /^\d/) {
-            my $pos = pos($objData);
-            if ($objData =~ /\G\s+(\d+)\s+R/sg) {
-                $val = \ "$val $1 R";   # make a reference
-            } else {
-                pos($objData) = $pos;
-            }
-        }
-        if ($$dict{$tag}) {
-            # duplicate dictionary entries are not allowed
-            $et->Warn("Duplicate '$tag' entry in dictionary (ignored)");
-        } else {
-            # save the entry
-            push @tags, $tag;
-            $$dict{$tag} = $val;
-        }
-    }
-    return undef unless @tags;
-    $$dict{_tags} = \@tags;
-    return $dict unless $raf;   # direct objects can not have streams
-#
-# extract the stream object
-#
-    # dictionary must specify stream Length
-    my $length = $$dict{Length} or return $dict;
-    if (ref $length) {
-        $length = $$length;
-        my $oldpos = $raf->Tell();
-        # get the location of the object specifying the length
-        # (compressed objects are not allowed)
-        my $offset = LocateObject($xref, $length) or return $dict;
-        $offset or $et->Warn('Bad Length object'), return $dict;
-        $raf->Seek($offset, 0) or $et->Warn('Bad Length offset'), return $dict;
-        # verify that we are reading the expected object
-        $raf->ReadLine($data) or $et->Warn('Error reading Length data'), return $dict;
-        $length =~ s/R/obj/;
-        unless ($data =~ /^$length\s+(\d+)?/) {
-            $et->Warn("Length object ($length) not found at $offset");
-            return $dict;
-        }
-        if (defined $1) {
-            $length = $1;
-        } else {
-            $raf->ReadLine($data) or $et->Warn('Error reading stream Length'), return $dict;
-            $data =~ /^\s*(\d+)/ or $et->Warn('Stream length not found'), return $dict;
-            $length = $1;
-        }
-        $raf->Seek($oldpos, 0); # restore position to start of stream
-    }
-    # extract the trailing stream data
-    for (;;) {
-        # find the stream token
-        if ($$dataPt =~ /(\S+)/) {
-            last unless $1 eq 'stream';
-            # read an extra line because it may contain our \x0a
-            $$dataPt .= $data if $raf->ReadLine($data);
-            # remove our stream header
-            $$dataPt =~ s/^\s*stream(\x0a|\x0d\x0a)//s;
-            my $more = $length - length($$dataPt);
-            if ($more > 0) {
-                unless ($raf->Read($data, $more) == $more) {
-                    $et->Warn('Error reading stream data');
-                    $$dataPt = '';
-                    return $dict;
-                }
-                $$dict{_stream} = $$dataPt . $data;
-                $$dataPt = '';
-            } elsif ($more < 0) {
-                $$dict{_stream} = substr($$dataPt, 0, $length);
-                $$dataPt = substr($$dataPt, $length);
-            } else {
-                $$dict{_stream} = $$dataPt;
-                $$dataPt = '';
-            }
-            last;
-        }
-        $raf->ReadLine($data) or last;
-        $$dataPt .= $data;
-    }
-    return $dict;
-}
-
-#------------------------------------------------------------------------------
-# Read to nested delimiter
-# Inputs: 0) data reference, 1) optional raf reference
-# Returns: data up to and including matching delimiter (or undef on error)
-# - updates data reference with trailing data
-# - unescapes characters in literal strings
-my %closingDelim = (    # lookup for matching delimiter
-    '(' => ')',
-    '[' => ']',
-    '<' => '>',
-   '<<' => '>>',
-);
-sub ReadToNested($;$)
-{
-    my ($dataPt, $raf) = @_;
-    my @delim = ('');   # closing delimiter list, most deeply nested first
-    pos($$dataPt) = 0;  # begin at start of data
-    for (;;) {
-        unless ($$dataPt =~ /(\\*)(\(|\)|<{1,2}|>{1,2}|\[|\]|%)/g) {
-            # must read some more data
-            my $buff;
-            last unless $raf and $raf->ReadLine($buff);
-            $$dataPt .= $buff;
-            pos($$dataPt) = length($$dataPt) - length($buff);
-            next;
-        }
-        # are we in a literal string?
-        if ($delim[0] eq ')') {
-            # ignore escaped delimiters (preceded by odd number of \'s)
-            next if length($1) & 0x01;
-            # ignore all delimiters but unescaped braces
-            next unless $2 eq '(' or $2 eq ')';
-        } elsif ($2 eq '%') {
-            # ignore the comment
-            my $pos = pos($$dataPt) - 1;
-            # remove everything from '%' up to but not including newline
-            $$dataPt =~ /.*/g;
-            my $end = pos($$dataPt);
-            $$dataPt = substr($$dataPt, 0, $pos) . substr($$dataPt, $end);
-            pos($$dataPt) = $pos;
-            next;
-        }
-        if ($closingDelim{$2}) {
-            # push the corresponding closing delimiter
-            unshift @delim, $closingDelim{$2};
-            next;
-        }
-        unless ($2 eq $delim[0]) {
-            # handle the case where we find a ">>>" and interpret it
-            # as ">> >" instead of "> >>"
-            next unless $2 eq '>>' and $delim[0] eq '>';
-            pos($$dataPt) = pos($$dataPt) - 1;
-        }
-        shift @delim;               # remove from nesting list
-        next if $delim[0];          # keep going if we have more nested delimiters
-        my $pos = pos($$dataPt);
-        my $buff = substr($$dataPt, 0, $pos);
-        $$dataPt = substr($$dataPt, $pos);
-        return $buff;   # success!
-    }
-    return undef;   # didn't find matching delimiter
-}
-
-#------------------------------------------------------------------------------
-# Decode LZW-encoded data (ref 1)
-# Inputs: 0) data reference
-# Returns: true on success and data is decoded, or false and data is untouched
-sub DecodeLZW($)
-{
-    my $dataPt = shift;
-    return 0 if length $$dataPt < 4;
-    my @lzw = (map(chr, 0..255), undef, undef); # LZW code table
-    my $mask = 0x01ff;  # mask for least-significant 9 bits
-    my @dat = unpack 'n*', $$dataPt . "\0";
-    my $word = ($dat[0] << 16) | $dat[1];
-    my ($bit, $pos, $bits, $out) = (0, 2, 9, '');
-    my $lastVal;
-    for (;;) {
-        # bits are packed MSB first in PDF LZW (the PDF spec doesn't mention this)
-        my $shift = 32 - ($bit + $bits);
-        if ($shift < 0) {
-            return 0 if $pos >= @dat; # missing EOD marker
-            $word = (($word & 0xffff) << 16) | $dat[$pos++]; # read next word
-            $bit -= 16;
-            $shift += 16;
-        };
-        my $code = ($word >> $shift) & $mask;
-        $bit += $bits;
-        my $val = $lzw[$code];
-        if (defined $val) {
-            # store new code as previous sequence plus 1st char of new sequence
-            push @lzw, $lastVal . substr($val, 0, 1) if defined $lastVal;
-        } elsif ($code == @lzw) { # new code
-            return 0 unless defined $lastVal;
-            # we are using the code that we are about to generate, so the last
-            # character in the new sequence must be the same as the first
-            # character in the previous sequence (makes sense if you think about it)
-            $val = $lastVal . substr($lastVal, 0, 1);
-            push @lzw, $val;
-        } elsif ($code == 256) { # clear table
-            splice @lzw, 258;
-            $bits = 9;
-            $mask = 0x1ff;
-            undef $lastVal;
-            next;
-        } elsif ($code == 257) { # EOD marker
-            last;   # all done!
-        } else {
-            return 0;
-        }
-        $out .= $val;   # add this byte sequence to the output
-        # we added a new entry to the LZW table, so we must increase
-        # the bit width if necessary, up to a maximum of 12
-        @lzw >= $mask and $bits < 12 and ++$bits, $mask |= $mask << 1;
-        $lastVal = $val;
-    }
-    $$dataPt = $out;    # return decompressed data
-    return 1;
-}
-
-#------------------------------------------------------------------------------
-# Decode filtered stream
-# Inputs: 0) ExifTool object reference, 1) dictionary reference
-# Returns: true if stream has been decoded OK
-sub DecodeStream($$)
-{
-    local $_;
-    my ($et, $dict) = @_;
-
-    return 0 unless $$dict{_stream}; # no stream to decode
-
-    # get list of filters
-    my (@filters, @decodeParms, $filter);
-    if (ref $$dict{Filter} eq 'ARRAY') {
-        @filters = @{$$dict{Filter}};
-    } elsif (defined $$dict{Filter}) {
-        @filters = ($$dict{Filter});
-    }
-    # be sure we can process all the filters before we take the time to do the decryption
-    foreach $filter (@filters) {
-        next if $supportedFilter{$filter};
-        $et->WarnOnce("Unsupported Filter $filter");
-        return 0;
-    }
-    # apply decryption first if required (and if the default encryption
-    # has not been overridden by a Crypt filter. Note: the Crypt filter
-    # must be first in the Filter array: ref 3, page 38)
-    unless (defined $$dict{_decrypted} or ($filters[0] and $filters[0] eq '/Crypt')) {
-        CryptStream($dict, $lastFetched);
-    }
-    return 1 unless $$dict{Filter};         # Filter entry is mandatory
-    return 0 if defined $$dict{_filtered};  # avoid double-filtering
-    $$dict{_filtered} = 1;                  # set flag to prevent double-filtering
-
-    # get array of DecodeParms dictionaries
-    if (ref $$dict{DecodeParms} eq 'ARRAY') {
-        @decodeParms = @{$$dict{DecodeParms}};
-    } else {
-        @decodeParms = ($$dict{DecodeParms});
-    }
-
-    foreach $filter (@filters) {
-        my $decodeParms = shift @decodeParms;
-
-        if ($filter eq '/FlateDecode') {
-            # make sure we support the predictor (if used) before decoding
-            my $pre;
-            if (ref $decodeParms eq 'HASH') {
-                $pre = $$decodeParms{Predictor};
-                if ($pre and $pre ne '1' and $pre ne '12') {
-                    $et->WarnOnce("FlateDecode Predictor $pre currently not supported");
-                    return 0;
-                }
-            }
-            if (eval { require Compress::Zlib }) {
-                my $inflate = Compress::Zlib::inflateInit();
-                my ($buff, $stat);
-                $inflate and ($buff, $stat) = $inflate->inflate($$dict{_stream});
-                if ($inflate and $stat == Compress::Zlib::Z_STREAM_END()) {
-                    $$dict{_stream} = $buff;
-                } else {
-                    $et->Warn('Error inflating stream');
-                    return 0;
-                }
-            } else {
-                $et->WarnOnce('Install Compress::Zlib to process filtered streams');
-                return 0;
-            }
-            next unless $pre and $pre eq '12';  # 12 = 'up' prediction
-
-            # apply anti-predictor
-            my $cols = $$decodeParms{Columns};
-            unless ($cols) {
-                # currently only support 'up' prediction
-                $et->WarnOnce('No Columns for decoding stream');
-                return 0;
-            }
-            my @bytes = unpack('C*', $$dict{_stream});
-            my @pre = (0) x $cols;  # initialize predictor array
-            my $buff = '';
-            while (@bytes > $cols) {
-                unless (($_ = shift @bytes) == 2) {
-                    $et->WarnOnce("Unsupported PNG filter $_"); # (yes, PNG)
-                    return 0;
-                }
-                foreach (@pre) {
-                    $_ = ($_ + shift(@bytes)) & 0xff;
-                }
-                $buff .= pack('C*', @pre);
-            }
-            $$dict{_stream} = $buff;
-
-        } elsif ($filter eq '/Crypt') {
-
-            # (we shouldn't have to check the _decrypted flag since we
-            #  already checked the _filtered flag, but what the heck...)
-            next if defined $$dict{_decrypted};
-            # assume Identity filter (the default) if DecodeParms are missing
-            next unless ref $decodeParms eq 'HASH';
-            my $name = $$decodeParms{Name};
-            next unless defined $name or $name eq 'Identity';
-            if ($name ne 'StdCF') {
-                $et->WarnOnce("Unsupported Crypt Filter $name");
-                return 0;
-            }
-            unless ($cryptInfo) {
-                $et->WarnOnce('Missing Encrypt StdCF entry');
-                return 0;
-            }
-            # decrypt the stream manually because we want to:
-            # 1) ignore $cryptStream (StmF) setting
-            # 2) ignore EncryptMetadata setting (I can't find mention of how to
-            #    reconcile this in the spec., but this would make sense)
-            # 3) avoid adding the crypt key extension (ref 3, page 58, Algorithm 1b)
-            # 4) set _decrypted flag so we will recrypt according to StmF when
-            #    writing (since we don't yet write Filter'd streams)
-            Crypt(\$$dict{_stream}, 'none');
-            $$dict{_decrypted} = ($cryptStream ? 1 : 0);
-
-        } elsif ($filter eq '/LZWDecode') {
-
-            # make sure we don't have any unsupported decoding parameters
-            if (ref $decodeParms eq 'HASH') {
-                if ($$decodeParms{Predictor}) {
-                    $et->WarnOnce("LZWDecode Predictor $$decodeParms{Predictor} currently not supported");
-                    return 0;
-                } elsif ($$decodeParms{EarlyChange}) {
-                    $et->WarnOnce("LZWDecode EarlyChange currently not supported");
-                    return 0;
-                }
-            }
-            unless (DecodeLZW(\$$dict{_stream})) {
-                $et->WarnOnce('LZW decompress error');
-                return 0;
-            }
-
-        } elsif ($filter eq '/ASCIIHexDecode') {
-
-            $$dict{_stream} =~ s/>.*//; # truncate at '>' (end of data mark)
-            $$dict{_stream} =~ tr/0-9a-zA-Z//d; # remove illegal characters
-            $$dict{_stream} = pack 'H*', $$dict{_stream};
-
-        }
-    }
-    return 1;
-}
-
-#------------------------------------------------------------------------------
-# Initialize state for RC4 en/decryption (ref 2)
-# Inputs: 0) RC4 key string
-# Returns: RC4 key hash reference
-sub RC4Init($)
-{
-    my @key = unpack('C*', shift);
-    my @state = (0 .. 255);
-    my ($i, $j) = (0, 0);
-    while ($i < 256) {
-        my $st = $state[$i];
-        $j = ($j + $st + $key[$i % scalar(@key)]) & 0xff;
-        $state[$i++] = $state[$j];
-        $state[$j] = $st;
-    }
-    return { State => \@state, XY => [ 0, 0 ] };
-}
-
-#------------------------------------------------------------------------------
-# Apply RC4 en/decryption (ref 2)
-# Inputs: 0) data reference, 1) RC4 key hash reference or RC4 key string
-# - can call this method directly with a key string, or with with the key
-#   reference returned by RC4Init
-# - RC4 is a symmetric algorithm, so encryption is the same as decryption
-sub RC4Crypt($$)
-{
-    my ($dataPt, $key) = @_;
-    $key = RC4Init($key) unless ref $key eq 'HASH';
-    my $state = $$key{State};
-    my ($x, $y) = @{$$key{XY}};
-
-    my @data = unpack('C*', $$dataPt);
-    foreach (@data) {
-         $x = ($x + 1) & 0xff;
-         my $stx = $$state[$x];
-         $y = ($stx + $y) & 0xff;
-         my $sty = $$state[$x] = $$state[$y];
-         $$state[$y] = $stx;
-         $_ ^= $$state[($stx + $sty) & 0xff];
-     }
-     $$key{XY} = [ $x, $y ];
-     $$dataPt = pack('C*', @data);
-}
-
-#------------------------------------------------------------------------------
-# Update AES cipher with a bit of data
-# Inputs: 0) data
-# Returns: encrypted data
-my $cipherMore;
-sub CipherUpdate($)
-{
-    my $dat = shift;
-    my $pos = 0;
-    $dat = $cipherMore . $dat if length $dat;
-    while ($pos + 16 <= length($dat)) {
-        substr($dat,$pos,16) = Image::ExifTool::AES::Cipher(substr($dat,$pos,16));
-        $pos += 16;
-    }
-    if ($pos < length $dat) {
-        $cipherMore = substr($dat,$pos);
-        $dat = substr($dat,0,$pos);
-    } else {
-        $cipherMore = '';
-    }
-    return $dat;
-}
-
-#------------------------------------------------------------------------------
-# Get encrypted hash
-# Inputs: 0) Password, 1) salt, 2) vector, 3) encryption revision
-# Returns: hash
-sub GetHash($$$$)
-{
-    my ($password, $salt, $vector, $rev) = @_;
-
-    # return Rev 5 hash
-    return Digest::SHA::sha256($password, $salt, $vector) if $rev == 5;
-
-    # compute Rev 6 hardened hash
-    # (ref http://code.google.com/p/origami-pdf/source/browse/lib/origami/encryption.rb)
-    my $blockSize = 32;
-    my $input = Digest::SHA::sha256($password, $salt, $vector) . ("\0" x 32);
-    my $key = substr($input, 0, 16);
-    my $iv = substr($input, 16, 16);
-    my $h;
-    my $x = '';
-    my $i = 0;
-    while ($i < 64 or $i < ord(substr($x,-1,1))+32) {
-
-        my $block = substr($input, 0, $blockSize);
-        $x = '';
-        Image::ExifTool::AES::Crypt(\$x, $key, $iv, 1);
-        $cipherMore = '';
-
-        my ($j, $digest);
-        for ($j=0; $j<64; ++$j)  {
-            $x = '';
-            $x .= CipherUpdate($password) if length $password;
-            $x .= CipherUpdate($block);
-            $x .= CipherUpdate($vector) if length $vector;
-            if ($j == 0) {
-                my @a = unpack('C16', $x);
-                my $sum = 0;
-                $sum += $_ foreach @a;
-                # set SHA block size (32, 48 or 64 bytes = SHA-256, 384 or 512)
-                $blockSize = 32 + ($sum % 3) * 16;
-                $digest = Digest::SHA->new($blockSize * 8);
-            }
-            $digest->add($x);
-        }
-
-        $h = $digest->digest();
-        $key = substr($h, 0, 16);
-        substr($input,0,16) = $h;
-        $iv = substr($h, 16, 16);
-        ++$i;
-    }
-    return substr($h, 0, 32);
-}
-
-#------------------------------------------------------------------------------
-# Initialize decryption
-# Inputs: 0) ExifTool object reference, 1) Encrypt dictionary reference,
-#         2) ID from file trailer dictionary
-# Returns: error string or undef on success (and sets $cryptInfo)
-sub DecryptInit($$$)
-{
-    local $_;
-    my ($et, $encrypt, $id) = @_;
-
-    undef $cryptInfo;
-    unless ($encrypt and ref $encrypt eq 'HASH') {
-        return 'Error loading Encrypt object';
-    }
-    my $filt = $$encrypt{Filter};
-    unless ($filt and $filt =~ s/^\///) {
-        return 'Encrypt dictionary has no Filter!';
-    }
-    # extract some interesting tags
-    my $ver = $$encrypt{V} || 0;
-    my $rev = $$encrypt{R} || 0;
-    my $enc = "$filt V$ver";
-    $enc .= ".$rev" if $filt eq 'Standard';
-    $enc .= " ($1)" if $$encrypt{SubFilter} and $$encrypt{SubFilter} =~ /^\/(.*)/;
-    $enc .= ' (' . ($$encrypt{Length} || 40) . '-bit)' if $filt eq 'Standard';
-    my $tagTablePtr = GetTagTable('Image::ExifTool::PDF::Encrypt');
-    $et->HandleTag($tagTablePtr, 'Filter', $enc);
-    if ($filt ne 'Standard') {
-        return "Encryption filter $filt currently not supported";
-    } elsif (not defined $$encrypt{R}) {
-        return 'Standard security handler missing revision';
-    }
-    unless ($$encrypt{O} and $$encrypt{P} and $$encrypt{U}) {
-        return 'Incomplete Encrypt specification';
-    }
-    if ("$ver.$rev" >= 5.6) {
-        # apologize for poor performance (AES is a pure Perl implementation)
-        $et->Warn('Decryption is very slow for encryption V5.6 or higher', 1);
-    }
-    $et->HandleTag($tagTablePtr, 'P', $$encrypt{P});
-
-    my %parm;   # optional parameters extracted from Encrypt dictionary
-
-    if ($ver == 1 or $ver == 2) {
-        $cryptString = $cryptStream = 1;
-    } elsif ($ver == 4 or $ver == 5) {
-        # initialize our $cryptString and $cryptStream flags
-        foreach ('StrF', 'StmF') {
-            my $flagPt = $_ eq 'StrF' ? \$cryptString : \$cryptStream;
-            $$flagPt = $$encrypt{$_};
-            undef $$flagPt if $$flagPt and $$flagPt eq '/Identity';
-            return "Unsupported $_ encryption $$flagPt" if $$flagPt and $$flagPt ne '/StdCF';
-        }
-        if ($cryptString or $cryptStream) {
-            return 'Missing or invalid Encrypt StdCF entry' unless ref $$encrypt{CF} eq 'HASH' and
-                ref $$encrypt{CF}{StdCF} eq 'HASH' and $$encrypt{CF}{StdCF}{CFM};
-            my $cryptMeth = $$encrypt{CF}{StdCF}{CFM};
-            unless ($cryptMeth =~ /^\/(V2|AESV2|AESV3)$/) {
-                return "Unsupported encryption method $cryptMeth";
-            }
-            # set "_aesv2" or "_aesv3" flag in %$encrypt hash if AES encryption was used
-            $$encrypt{'_' . lc($1)} = 1 if $cryptMeth =~ /^\/(AESV2|AESV3)$/;
-        }
-        if ($ver == 5) {
-            # validate OE and UE entries
-            foreach ('OE', 'UE') {
-                return "Missing Encrypt $_ entry" unless $$encrypt{$_};
-                $parm{$_} = ReadPDFValue($$encrypt{$_});
-                return "Invalid Encrypt $_ entry" unless length $parm{$_} == 32;
-            }
-            require Image::ExifTool::AES;   # will need this later
-        }
-    } else {
-        return "Encryption version $ver currently not supported";
-    }
-    $id or return "Can't decrypt (no document ID)";
-
-    # make sure we have the necessary libraries available
-    if ($ver < 5) {
-        unless (eval { require Digest::MD5 }) {
-            return "Install Digest::MD5 to process encrypted PDF";
-        }
-    } else {
-        unless (eval { require Digest::SHA }) {
-            return "Install Digest::SHA to process AES-256 encrypted PDF";
-        }
-    }
-
-    # calculate file-level en/decryption key
-    my $pad = "\x28\xBF\x4E\x5E\x4E\x75\x8A\x41\x64\x00\x4E\x56\xFF\xFA\x01\x08".
-              "\x2E\x2E\x00\xB6\xD0\x68\x3E\x80\x2F\x0C\xA9\xFE\x64\x53\x69\x7A";
-    my $o = ReadPDFValue($$encrypt{O});
-    my $u = ReadPDFValue($$encrypt{U});
-
-    # set flag indicating whether metadata is encrypted
-    # (in version 4 and higher, metadata streams may not be encrypted)
-    if ($ver < 4 or not $$encrypt{EncryptMetadata} or $$encrypt{EncryptMetadata} !~ /false/i) {
-        $$encrypt{_meta} = 1;
-    }
-    # try no password first, then try provided password if available
-    my ($try, $key);
-    for ($try=0; ; ++$try) {
-        my $password;
-        if ($try == 0) {
-            $password = '';
-        } elsif ($try == 1) {
-            $password = $et->Options('Password');
-            return 'Document is password protected (use Password option)' unless defined $password;
-            # make sure there is no UTF-8 flag on the password
-            if ($] >= 5.006 and (eval { require Encode; Encode::is_utf8($password) } or $@)) {
-                # repack by hand if Encode isn't available
-                $password = $@ ? pack('C*',unpack($] < 5.010000 ? 'U0C*' : 'C0C*',$password)) : Encode::encode('utf8',$password);
-            }
-        } else {
-            return 'Incorrect password';
-        }
-        if ($ver < 5) {
-            if (length $password) {
-                # password must be encoding in PDFDocEncoding (ref iso32000)
-                $password = $et->Encode($password, 'PDFDoc');
-                # truncate or pad the password to exactly 32 bytes
-                if (length($password) > 32) {
-                    $password = substr($password, 0, 32);
-                } elsif (length($password) < 32) {
-                    $password .= substr($pad, 0, 32-length($password));
-                }
-            } else {
-                $password = $pad;
-            }
-            $key = $password . $o . pack('V', $$encrypt{P}) . $id;
-            my $rep = 1;
-            if ($rev == 3 or $rev == 4) {
-                # must add this if metadata not encrypted
-                $key .= "\xff\xff\xff\xff" unless $$encrypt{_meta};
-                $rep += 50; # repeat MD5 50 more times if revision is 3 or greater
-            }
-            my ($len, $i, $dat);
-            if ($ver == 1) {
-                $len = 5;
-            } else {
-                $len = $$encrypt{Length} || 40;
-                $len >= 40 or return 'Bad Encrypt Length';
-                $len = int($len / 8);
-            }
-            for ($i=0; $i<$rep; ++$i) {
-                $key = substr(Digest::MD5::md5($key), 0, $len);
-            }
-            # decrypt U to see if a user password is required
-            if ($rev >= 3) {
-                $dat = Digest::MD5::md5($pad . $id);
-                RC4Crypt(\$dat, $key);
-                for ($i=1; $i<=19; ++$i) {
-                    my @key = unpack('C*', $key);
-                    foreach (@key) { $_ ^= $i; }
-                    RC4Crypt(\$dat, pack('C*', @key));
-                }
-                $dat .= substr($u, 16);
-            } else {
-                $dat = $pad;
-                RC4Crypt(\$dat, $key);
-            }
-            last if $dat eq $u; # all done if this was the correct key
-        } else {
-            return 'Invalid O or U Encrypt entries' if length($o) < 48 or length($u) < 48;
-            if (length $password) {
-                # Note: this should be good for passwords containing reasonable characters,
-                # but to be bullet-proof we need to apply the SASLprep (IETF RFC 4013) profile
-                # of stringprep (IETF RFC 3454) to the password before encoding in UTF-8
-                $password = $et->Encode($password, 'UTF8');
-                $password = substr($password, 0, 127) if length($password) > 127;
-            }
-            # test for the owner password
-            my $sha = GetHash($password, substr($o,32,8), substr($u,0,48), $rev);
-            if ($sha eq substr($o, 0, 32)) {
-                $key = GetHash($password, substr($o,40,8), substr($u,0,48), $rev);
-                my $dat = ("\0" x 16) . $parm{OE};
-                # decrypt with no padding
-                my $err = Image::ExifTool::AES::Crypt(\$dat, $key, 0, 1);
-                return $err if $err;
-                $key = $dat;    # use this as the file decryption key
-                last;
-            }
-            # test for the user password
-            $sha = GetHash($password, substr($u,32,8), '', $rev);
-            if ($sha eq substr($u, 0, 32)) {
-                $key = GetHash($password, substr($u,40,8), '', $rev);
-                my $dat = ("\0" x 16) . $parm{UE};
-                my $err = Image::ExifTool::AES::Crypt(\$dat, $key, 0, 1);
-                return $err if $err;
-                $key = $dat;    # use this as the file decryption key
-                last;
-            }
-        }
-    }
-    $$encrypt{_key} = $key; # save the file-level encryption key
-    $cryptInfo = $encrypt;  # save reference to the file-level Encrypt object
-    return undef;           # success!
-}
-
-#------------------------------------------------------------------------------
-# Decrypt/Encrypt data
-# Inputs: 0) data ref
-#         1) PDF object reference to use as crypt key extension (may be 'none' to
-#            avoid extending the encryption key, as for streams with Crypt Filter)
-#         2) encrypt flag (false for decryption)
-sub Crypt($$;$)
-{
-    return unless $cryptInfo;
-    my ($dataPt, $keyExt, $encrypt) = @_;
-    # do not decrypt if the key extension object is undefined
-    # (this doubles as a flag to disable decryption/encryption)
-    return unless defined $keyExt;
-    my $key = $$cryptInfo{_key};
-    # apply the necessary crypt key extension
-    unless ($$cryptInfo{_aesv3}) {
-        unless ($keyExt eq 'none') {
-            # extend crypt key using object and generation number
-            unless ($keyExt =~ /^(I\d+ )?(\d+) (\d+)/) {
-                $$cryptInfo{_error} = 'Invalid object reference for encryption';
-                return;
-            }
-            $key .= substr(pack('V', $2), 0, 3) . substr(pack('V', $3), 0, 2);
-        }
-        # add AES-128 salt if necessary (this little gem is conveniently
-        # omitted from the Adobe PDF 1.6 documentation, causing me to
-        # waste 12 hours trying to figure out why this wasn't working --
-        # it appears in ISO32000 though, so I should have been using that)
-        $key .= 'sAlT' if $$cryptInfo{_aesv2};
-        my $len = length($key);
-        $key = Digest::MD5::md5($key);              # get 16-byte MD5 digest
-        $key = substr($key, 0, $len) if $len < 16;  # trim if necessary
-    }
-    # perform the decryption/encryption
-    if ($$cryptInfo{_aesv2} or $$cryptInfo{_aesv3}) {
-        require Image::ExifTool::AES;
-        my $err = Image::ExifTool::AES::Crypt($dataPt, $key, $encrypt);
-        $err and $$cryptInfo{_error} = $err;
-    } else {
-        RC4Crypt($dataPt, $key);
-    }
-}
-
-#------------------------------------------------------------------------------
-# Decrypt/Encrypt stream data
-# Inputs: 0) dictionary ref, 1) PDF object reference to use as crypt key extension
-sub CryptStream($$)
-{
-    return unless $cryptStream;
-    my ($dict, $keyExt) = @_;
-    my $type = $$dict{Type} || '';
-    # XRef streams are not encrypted (ref 3, page 50),
-    # and Metadata may or may not be encrypted
-    if ($cryptInfo and $type ne '/XRef' and
-        ($$cryptInfo{_meta} or $type ne '/Metadata'))
-    {
-        Crypt(\$$dict{_stream}, $keyExt, $$dict{_decrypted});
-        # toggle _decrypted flag
-        $$dict{_decrypted} = ($$dict{_decrypted} ? undef : 1);
-    } else {
-        $$dict{_decrypted} = 0; # stream should never be encrypted
-    }
-}
-
-#------------------------------------------------------------------------------
-# Generate a new PDF tag (based on its ID) and add it to a tag table
-# Inputs: 0) tag table ref, 1) tag ID
-# Returns: tag info ref
-sub NewPDFTag($$)
-{
-    my ($tagTablePtr, $tag) = @_;
-    my $name = $tag;
-    # translate URL-like escape sequences
-    $name =~ s/#([0-9a-f]{2})/chr(hex($1))/ige;
-    $name =~ s/[^-\w]+/_/g;         # translate invalid characters to an underline
-    $name =~ s/(^|_)([a-z])/\U$2/g; # start words with upper case
-    my $tagInfo = { Name => $name };
-    AddTagToTable($tagTablePtr, $tag, $tagInfo);
-    return $tagInfo;
-}
-
-#------------------------------------------------------------------------------
-# Process AcroForm dictionary to set HasXMLFormsArchitecture flag
-# Inputs: Same as ProcessDict
-sub ProcessAcroForm($$$$;$$)
-{
-    my ($et, $tagTablePtr, $dict, $xref, $nesting, $type) = @_;
-    $et->HandleTag($tagTablePtr, '_has_xfa', $$dict{XFA} ? 'true' : 'false');
-    return ProcessDict($et, $tagTablePtr, $dict, $xref, $nesting, $type);
-}
-
-#------------------------------------------------------------------------------
-# Process PDF dictionary extract tag values
-# Inputs: 0) ExifTool object reference, 1) tag table reference
-#         2) dictionary reference, 3) cross-reference table reference,
-#         4) nesting depth, 5) dictionary capture type
-sub ProcessDict($$$$;$$)
-{
-    my ($et, $tagTablePtr, $dict, $xref, $nesting, $type) = @_;
-    my $verbose = $et->Options('Verbose');
-    my $unknown = $$tagTablePtr{EXTRACT_UNKNOWN};
-    my $embedded = (defined $unknown and not $unknown and $et->Options('ExtractEmbedded'));
-    my @tags = @{$$dict{_tags}};
-    my ($next, %join);
-    my $index = 0;
-
-    $nesting = ($nesting || 0) + 1;
-    if ($nesting > 50) {
-        $et->WarnOnce('Nesting too deep (directory ignored)');
-        return;
-    }
-    # save entire dictionary for rewriting if specified
-    if ($$et{PDF_CAPTURE} and $$tagTablePtr{VARS} and
-        $tagTablePtr->{VARS}->{CAPTURE})
-    {
-        my $name;
-        foreach $name (@{$tagTablePtr->{VARS}->{CAPTURE}}) {
-            next if $$et{PDF_CAPTURE}{$name};
-            # make sure we load the right type if indicated
-            next if $type and $type ne $name;
-            $$et{PDF_CAPTURE}{$name} = $dict;
-            last;
-        }
-    }
-#
-# extract information from all tags in the dictionary
-#
-    for (;;) {
-        my ($tag, $isSubDoc);
-        if (@tags) {
-            $tag = shift @tags;
-        } elsif (defined $next and not $next) {
-            $tag = 'Next';
-            $next = 1;
-        } else {
-            last;
-        }
-        my $val = $$dict{$tag};
-        my $tagInfo = $et->GetTagInfo($tagTablePtr, $tag);
-        if ($tagInfo) {
-            undef $tagInfo if $$tagInfo{NoProcess};
-        } elsif ($embedded and $tag =~ /^(.*?)(\d+)$/ and
-            $$tagTablePtr{$1} and (ref $val ne 'SCALAR' or not $fetched{$$val}))
-        {
-            my ($name, $num) = ($1, $2);
-            $tagInfo = $et->GetTagInfo($tagTablePtr, $name);
-            if (ref $tagInfo eq 'HASH' and $$tagInfo{JoinStreams}) {
-                $fetched{$$val} = 1;
-                my $obj = FetchObject($et, $$val, $xref, $tag);
-                $join{$name} = [] unless $join{$name};
-                next unless ref $obj eq 'HASH' and $$obj{_stream};
-                # save all the stream data to join later
-                DecodeStream($et, $obj);
-                $join{$name}->[$num] = $$obj{_stream};
-                undef $tagInfo;    # don't process
-            } else {
-                $isSubDoc = 1;  # treat as a sub-document
-            }
-        }
-        if ($verbose) {
-            my ($val2, $extra);
-            if (ref $val eq 'SCALAR') {
-                $extra = ", indirect object ($$val)";
-                if ($fetched{$$val}) {
-                    $val2 = "ref($$val)";
-                } elsif ($tag eq 'Next' and not $next) {
-                    # handle 'Next' links after all others
-                    $next = 0;
-                    next;
-                } else {
-                    $fetched{$$val} = 1;
-                    $val = FetchObject($et, $$val, $xref, $tag);
-                    unless (defined $val) {
-                        my $str;
-                        if (defined $lastOffset) {
-                            $val2 = '<free>';
-                            $str = 'Object was freed';
-                        } else {
-                            $val2 = '<err>';
-                            $str = 'Error reading object';
-                        }
-                        $et->VPrint(0, "$$et{INDENT}${str}:\n");
-                    }
-                }
-            } elsif (ref $val eq 'HASH') {
-                $extra = ', direct dictionary';
-            } elsif (ref $val eq 'ARRAY') {
-                $extra = ', direct array of ' . scalar(@$val) . ' objects';
-            } else {
-                $extra = ', direct object';
-            }
-            my $isSubdir;
-            if (ref $val eq 'HASH') {
-                $isSubdir = 1;
-            } elsif (ref $val eq 'ARRAY') {
-                # recurse into objects in arrays only if they are lists of
-                # dictionaries or indirect objects which could be dictionaries
-                $isSubdir = 1 if @$val;
-                foreach (@$val) {
-                    next if ref $_ eq 'HASH' or ref $_ eq 'SCALAR';
-                    undef $isSubdir;
-                    last;
-                }
-            }
-            if ($isSubdir) {
-                # create bogus subdirectory to recurse into this dict
-                $tagInfo or $tagInfo = {
-                    Name => $tag,
-                    SubDirectory => { TagTable => 'Image::ExifTool::PDF::Unknown' },
-                };
-            } else {
-                if (ref $val eq 'ARRAY') {
-                    my @list = @$val;
-                    foreach (@list) {
-                        $_ = "ref($$_)" if ref $_ eq 'SCALAR';
-                        $_ = '<undef>' unless defined $_;
-                    }
-                    $val2 = '[' . join(',',@list) . ']';
-                }
-                # generate tag info if we will use it later
-                if (not $tagInfo and defined $val and $unknown) {
-                    $tagInfo = NewPDFTag($tagTablePtr, $tag);
-                }
-            }
-            $et->VerboseInfo($tag, $tagInfo,
-                Value => $val2 || $val,
-                Extra => $extra,
-                Index => $index++,
-            );
-            next unless defined $val;
-        }
-        unless ($tagInfo) {
-            # add any tag found in Info dictionary to table
-            next unless $unknown;
-            $tagInfo = NewPDFTag($tagTablePtr, $tag);
-        }
-        # increment document number if necessary
-        my ($oldDocNum, $oldNumTags);
-        if ($isSubDoc) {
-            $oldDocNum = $$et{DOC_NUM};
-            $oldNumTags = $$et{NUM_FOUND};
-            $$et{DOC_NUM} = ++$$et{DOC_COUNT};
-        }
-        if ($$tagInfo{SubDirectory}) {
-            # process the subdirectory
-            my @subDicts;
-            if (ref $val eq 'ARRAY') {
-                @subDicts = @{$val};
-            } else {
-                @subDicts = ( $val );
-            }
-            # loop through all values of this tag
-            for (;;) {
-                my $subDict = shift @subDicts or last;
-                # save last fetched object in case we fetch another one here
-                my $prevFetched = $lastFetched;
-                if (ref $subDict eq 'SCALAR') {
-                    # only fetch once (other copies are obsolete)
-                    next if $fetched{$$subDict};
-                    if ($$tagInfo{IgnoreDuplicates}) {
-                        my $flag = "ProcessedPDF_$tag";
-                        if ($$et{$flag}) {
-                            next if $et->WarnOnce("Ignored duplicate $tag dictionary", 2);
-                        } else {
-                            $$et{$flag} = 1;
-                        }
-                    }
-                    # load dictionary via an indirect reference
-                    $fetched{$$subDict} = 1;
-                    my $obj = FetchObject($et, $$subDict, $xref, $tag);
-                    unless (defined $obj) {
-                        unless (defined $lastOffset) {
-                            $et->Warn("Error reading $tag object ($$subDict)");
-                        }
-                        next;
-                    }
-                    $subDict = $obj;
-                }
-                if (ref $subDict eq 'ARRAY') {
-                    # convert array of key/value pairs to a hash
-                    next if @$subDict < 2;
-                    my %hash = ( _tags => [] );
-                    while (@$subDict >= 2) {
-                        my $key = shift @$subDict;
-                        $key =~ s/^\///;
-                        push @{$hash{_tags}}, $key;
-                        $hash{$key} = shift @$subDict;
-                    }
-                    $subDict = \%hash;
-                } else {
-                    next unless ref $subDict eq 'HASH';
-                }
-                # set flag to re-crypt all strings when rewriting if the dictionary
-                # came from an encrypted stream
-                $$subDict{_needCrypt}{'*'} = 1 unless $lastFetched;
-                my $subTablePtr = GetTagTable($tagInfo->{SubDirectory}->{TagTable});
-                if (not $verbose) {
-                    my $proc = $$subTablePtr{PROCESS_PROC} || \&ProcessDict;
-                    &$proc($et, $subTablePtr, $subDict, $xref, $nesting);
-                } elsif ($next) {
-                    # handle 'Next' links at this level to avoid deep recursion
-                    undef $next;
-                    $index = 0;
-                    $tagTablePtr = $subTablePtr;
-                    $dict = $subDict;
-                    @tags = @{$$subDict{_tags}};
-                    $et->VerboseDir($tag, scalar(@tags));
-                } else {
-                    my $oldIndent = $$et{INDENT};
-                    my $oldDir = $$et{DIR_NAME};
-                    $$et{INDENT} .= '| ';
-                    $$et{DIR_NAME} = $tag;
-                    $et->VerboseDir($tag, scalar(@{$$subDict{_tags}}));
-                    ProcessDict($et, $subTablePtr, $subDict, $xref, $nesting);
-                    $$et{INDENT} = $oldIndent;
-                    $$et{DIR_NAME} = $oldDir;
-                }
-                $lastFetched = $prevFetched;
-            }
-        } else {
-            # fetch object if necessary
-            # (OS X 10.6 writes indirect objects in the Info dictionary!)
-            if (ref $val eq 'SCALAR') {
-                my $prevFetched = $lastFetched;
-                # (note: fetching the same object multiple times is OK here)
-                $val = FetchObject($et, $$val, $xref, $tag);
-                if (defined $val) {
-                    $val = ReadPDFValue($val);
-                    # set flag to re-encrypt if necessary if rewritten
-                    $$dict{_needCrypt}{$tag} = ($lastFetched ? 0 : 1) if $cryptString;
-                    $lastFetched = $prevFetched; # restore last fetched object reference
-                }
-            } else {
-                $val = ReadPDFValue($val);
-            }
-            # convert from UTF-16 (big endian) to UTF-8 or Latin if necessary
-            # unless this is binary data (hex-encoded strings would not have been converted)
-            if (ref $val) {
-                if (ref $val eq 'ARRAY') {
-                    my $v;
-                    foreach $v (@$val) {
-                        $et->FoundTag($tagInfo, $v);
-                    }
-                }
-            } elsif (defined $val) {
-                my $format = $$tagInfo{Format} || $$tagInfo{Writable} || 'string';
-                $val = ConvertPDFDate($val) if $format eq 'date';
-                if (not $$tagInfo{Binary} and $val =~ /[\x18-\x1f\x80-\xff]/) {
-                    # text string is already in Unicode if it starts with "\xfe\xff",
-                    # otherwise we must first convert from PDFDocEncoding
-                    $val = $et->Decode($val, ($val=~s/^\xfe\xff// ? 'UCS2' : 'PDFDoc'), 'MM');
-                }
-                if ($$tagInfo{List} and not $$et{OPTIONS}{NoPDFList}) {
-                    # separate tokens in comma or whitespace delimited lists
-                    my @values = ($val =~ /,/) ? split /,+\s*/, $val : split ' ', $val;
-                    foreach $val (@values) {
-                        $et->FoundTag($tagInfo, $val);
-                    }
-                } else {
-                    # a simple tag value
-                    $et->FoundTag($tagInfo, $val);
-                }
-            }
-        }
-        if ($isSubDoc) {
-            # restore original document number
-            $$et{DOC_NUM} = $oldDocNum;
-            --$$et{DOC_COUNT} if $oldNumTags == $$et{NUM_FOUND};
-        }
-    }
-#
-# extract information from joined streams if necessary
-#
-
-    if (%join) {
-        my ($tag, $i);
-        foreach $tag (sort keys %join) {
-            my $list = $join{$tag};
-            last unless defined $$list[1] and $$list[1] =~ /^%.*?([\x0d\x0a]*)/;
-            my $buff = "%!PS-Adobe-3.0$1";  # add PS header with same line break
-            for ($i=1; defined $$list[$i]; ++$i) {
-                $buff .= $$list[$i];
-                undef $$list[$i];   # free memory
-            }
-            # increment document number for tags extracted from embedded EPS
-            my $oldDocNum = $$et{DOC_NUM};
-            my $oldNumTags = $$et{NUM_FOUND};
-            $$et{DOC_NUM} = ++$$et{DOC_COUNT};
-            # extract PostScript information
-            $et->HandleTag($tagTablePtr, $tag, $buff);
-            $$et{DOC_NUM} = $oldDocNum;
-            # revert document counter if we didn't add any new tags
-            --$$et{DOC_COUNT} if $oldNumTags == $$et{NUM_FOUND};
-            delete $$et{DOC_NUM};
-        }
-    }
-#
-# extract information from stream object if it exists (eg. Metadata stream)
-#
-    for (;;) { # (cheap goto)
-        last unless $$dict{_stream};
-        my $tag = '_stream';
-        # add Subtype (if it exists) to stream name and remove leading '/'
-        ($tag = $$dict{Subtype} . $tag) =~ s/^\/// if $$dict{Subtype};
-        last unless $$tagTablePtr{$tag};
-        my $tagInfo = $et->GetTagInfo($tagTablePtr, $tag) or last;
-        unless ($$tagInfo{SubDirectory}) {
-            # don't build filter lists across different images
-            delete $$et{LIST_TAGS}{$$tagTablePtr{Filter}};
-            # we arrive here only when extracting embedded images
-            # - only extract known image types and ignore others
-            my $filter = $$dict{Filter} || '';
-            $filter = @$filter[-1] if ref $filter eq 'ARRAY'; # (get last Filter type)
-            my $result;
-            if ($filter eq '/DCTDecode' or $filter eq '/JPXDecode') {
-                DecodeStream($et, $dict) or last;
-                # save the image itself
-                $et->FoundTag($tagInfo, \$$dict{_stream});
-                # extract information from embedded image
-                $result = $et->ExtractInfo(\$$dict{_stream}, { ReEntry => 1 });
-            }
-            unless ($result) {
-                $et->FoundTag('FileType', defined $result ? '(unknown)' : '(unsupported)');
-            }
-            last;
-        }
-        # decode stream if necessary
-        DecodeStream($et, $dict) or last;
-        # extract information from stream
-        my %dirInfo = (
-            DataPt   => \$$dict{_stream},
-            DataLen  => length $$dict{_stream},
-            DirStart => 0,
-            DirLen   => length $$dict{_stream},
-            Parent   => 'PDF',
-        );
-        my $subTablePtr = GetTagTable($tagInfo->{SubDirectory}->{TagTable});
-        unless ($et->ProcessDirectory(\%dirInfo, $subTablePtr)) {
-            $et->Warn("Error processing $$tagInfo{Name} information");
-        }
-        last;
-    }
-}
-
-#------------------------------------------------------------------------------
-# Extract information from PDF file
-# Inputs: 0) ExifTool object reference, 1) dirInfo reference
-# Returns: 0 if not a PDF file, 1 on success, otherwise a negative error number
-sub ReadPDF($$)
-{
-    my ($et, $dirInfo) = @_;
-    my $raf = $$dirInfo{RAF};
-    my $verbose = $et->Options('Verbose');
-    my ($buff, $encrypt, $id);
-#
-# validate PDF file
-#
-    # (linearization dictionary must be in the first 1024 bytes of the file)
-    $raf->Read($buff, 1024) >= 8 or return 0;
-    $buff =~ /^%PDF-(\d+\.\d+)/ or return 0;
-    $pdfVer = $1;
-    $et->SetFileType();   # set the FileType tag
-    $et->Warn("May not be able to read a PDF version $pdfVer file") if $pdfVer >= 2.0;
-    # store PDFVersion tag
-    my $tagTablePtr = GetTagTable('Image::ExifTool::PDF::Root');
-    $et->HandleTag($tagTablePtr, 'Version', $pdfVer);
-    $tagTablePtr = GetTagTable('Image::ExifTool::PDF::Main');
-#
-# check for a linearized PDF (only if reading)
-#
-    my $capture = $$et{PDF_CAPTURE};
-    unless ($capture) {
-        my $lin = 'false';
-        if ($buff =~ /<</g) {
-            $buff = substr($buff, pos($buff) - 2);
-            my $dict = ExtractObject($et, \$buff);
-            if (ref $dict eq 'HASH' and $$dict{Linearized} and $$dict{L}) {
-                if (not $$et{VALUE}{FileSize}) {
-                    undef $lin; # can't determine if it is linearized
-                } elsif ($$dict{L} == $$et{VALUE}{FileSize}) {
-                    $lin = 'true';
-                }
-            }
-        }
-        $et->HandleTag($tagTablePtr, '_linearized', $lin) if $lin;
-    }
-#
-# read the xref tables referenced from startxref at the end of the file
-#
-    my @xrefOffsets;
-    $raf->Seek(0, 2) or return -2;
-    # the %%EOF must occur within the last 1024 bytes of the file (PDF spec, appendix H)
-    my $len = $raf->Tell();
-    $len = 1024 if $len > 1024;
-    $raf->Seek(-$len, 2) or return -2;
-    $raf->Read($buff, $len) == $len or return -3;
-    # find the LAST xref table in the file (may be multiple %%EOF marks)
-    $buff =~ /^.*startxref(\s+)(\d+)(\s+)%%EOF/s or return -4;
-    my $ws = $1 . $3;
-    my $xr = $2;
-    push @xrefOffsets, $xr, 'Main';
-    # set input record separator
-    local $/ = $ws =~ /(\x0d\x0a|\x0d|\x0a)/ ? $1 : "\x0a";
-    my (%xref, @mainDicts, %loaded, $mainFree);
-    # initialize variables to capture when rewriting
-    if ($capture) {
-        $capture->{startxref} = $xr;
-        $capture->{xref} = \%xref;
-        $capture->{newline} = $/;
-        $capture->{mainFree} = $mainFree = { };
-    }
-XRef:
-    while (@xrefOffsets) {
-        my $offset = shift @xrefOffsets;
-        my $type = shift @xrefOffsets;
-        next if $loaded{$offset};   # avoid infinite recursion
-        unless ($raf->Seek($offset, 0)) {
-            %loaded or return -5;
-            $et->Warn('Bad offset for secondary xref table');
-            next;
-        }
-        # Note: care must be taken because ReadLine may read more than we want if
-        # the newline sequence for this table is different than the rest of the file
-        for (;;) {
-            unless ($raf->ReadLine($buff)) {
-                %loaded or return -6;
-                $et->Warn('Bad offset for secondary xref table');
-                next XRef;
-            }
-            last if $buff =~/\S/;   # skip blank lines
-        }
-        my $loadXRefStream;
-        if ($buff =~ s/^\s*xref\s+//s) {
-            # load xref table
-            for (;;) {
-                # read another line if necessary (skipping blank lines)
-                $raf->ReadLine($buff) or return -6 until $buff =~ /\S/;
-                last if $buff =~ s/^\s*trailer([\s<[(])/$1/s;
-                $buff =~ s/^\s*(\d+)\s+(\d+)\s+//s or return -4;
-                my ($start, $num) = ($1, $2);
-                $raf->Seek(-length($buff), 1) or return -4;
-                my $i;
-                for ($i=0; $i<$num; ++$i) {
-                    $raf->Read($buff, 20) == 20 or return -6;
-                    $buff =~ /^\s*(\d{10}) (\d{5}) (f|n)/s or return -4;
-                    my $num = $start + $i;
-                    # save offset for newest copy of all objects
-                    # (or next object number for free objects)
-                    unless (defined $xref{$num}) {
-                        my ($offset, $gen) = (int($1), int($2));
-                        $xref{$num} = $offset;
-                        if ($3 eq 'f') {
-                            # save free objects in last xref table for rewriting
-                            $$mainFree{$num} =  [ $offset, $gen, 'f' ] if $mainFree;
-                            next;
-                        }
-                        # also save offset keyed by object reference string
-                        $xref{"$num $gen R"} = $offset;
-                    }
-                }
-                # (I have a sample from Adobe which has an empty xref table)
-                # %xref or return -4; # xref table may not be empty
-                $buff = '';
-            }
-            undef $mainFree;    # only do this for the last xref table
-        } elsif ($buff =~ s/^\s*(\d+)\s+(\d+)\s+obj//s) {
-            # this is a PDF-1.5 cross-reference stream dictionary
-            $loadXRefStream = 1;
-        } else {
-            %loaded or return -4;
-            $et->Warn('Invalid secondary xref table');
-            next;
-        }
-        my $mainDict = ExtractObject($et, \$buff, $raf, \%xref);
-        unless (ref $mainDict eq 'HASH') {
-            %loaded or return -8;
-            $et->Warn('Error loading secondary dictionary');
-            next;
-        }
-        if ($loadXRefStream) {
-            # decode and save our XRef stream from PDF-1.5 file
-            # (but parse it later as required to save time)
-            # Note: this technique can potentially result in an old object
-            # being used if the file was incrementally updated and an older
-            # object from an xref table was replaced by a newer object in an
-            # xref stream.  But doing so isn't a good idea (if allowed at all)
-            # because a PDF 1.4 consumer would also make this same mistake.
-            if ($$mainDict{Type} eq '/XRef' and $$mainDict{W} and
-                @{$$mainDict{W}} > 2 and $$mainDict{Size} and
-                DecodeStream($et, $mainDict))
-            {
-                # create Index entry if it doesn't exist
-                $$mainDict{Index} or $$mainDict{Index} = [ 0, $$mainDict{Size} ];
-                # create '_entry_size' entry for internal use
-                my $w = $$mainDict{W};
-                my $size = 0;
-                foreach (@$w) { $size += $_; }
-                $$mainDict{_entry_size} = $size;
-                # save this stream dictionary to use later if required
-                $xref{dicts} = [] unless $xref{dicts};
-                push @{$xref{dicts}}, $mainDict;
-            } else {
-                %loaded or return -9;
-                $et->Warn('Invalid xref stream in secondary dictionary');
-            }
-        }
-        $loaded{$offset} = 1;
-        # load XRef stream in hybrid file if it exists
-        push @xrefOffsets, $$mainDict{XRefStm}, 'XRefStm' if $$mainDict{XRefStm};
-        $encrypt = $$mainDict{Encrypt} if $$mainDict{Encrypt};
-        if ($$mainDict{ID} and ref $$mainDict{ID} eq 'ARRAY') {
-            $id = ReadPDFValue($mainDict->{ID}->[0]);
-        }
-        push @mainDicts, $mainDict, $type;
-        # load previous xref table if it exists
-        push @xrefOffsets, $$mainDict{Prev}, 'Prev' if $$mainDict{Prev};
-    }
-#
-# extract encryption information if necessary
-#
-    if ($encrypt) {
-        if (ref $encrypt eq 'SCALAR') {
-            $encrypt = FetchObject($et, $$encrypt, \%xref, 'Encrypt');
-        }
-        # generate Encryption tag information
-        my $err = DecryptInit($et, $encrypt, $id);
-        if ($err) {
-            $et->Warn($err);
-            $$capture{Error} = $err if $capture;
-            return -1;
-        }
-    }
-#
-# extract the information beginning with each of the main dictionaries
-#
-    my $i = 0;
-    my $num = (scalar @mainDicts) / 2;
-    while (@mainDicts) {
-        my $dict = shift @mainDicts;
-        my $type = shift @mainDicts;
-        if ($verbose) {
-            ++$i;
-            my $n = scalar(@{$$dict{_tags}});
-            $et->VPrint(0, "PDF dictionary ($i of $num) with $n entries:\n");
-        }
-        ProcessDict($et, $tagTablePtr, $dict, \%xref, 0, $type);
-    }
-    # handle any decryption errors
-    if ($encrypt) {
-        my $err = $$encrypt{_error};
-        if ($err) {
-            $et->Warn($err);
-            $$capture{Error} = $err if $capture;
-            return -1;
-        }
-    }
-    return 1;
-}
-
-#------------------------------------------------------------------------------
-# ReadPDF() warning strings for each error return value
-my %pdfWarning = (
-    # -1 is reserved as error return value with no associated warning
-    -2 => 'Error seeking in file',
-    -3 => 'Error reading file',
-    -4 => 'Invalid xref table',
-    -5 => 'Invalid xref offset',
-    -6 => 'Error reading xref table',
-    -7 => 'Error reading trailer',
-    -8 => 'Error reading main dictionary',
-    -9 => 'Invalid xref stream in main dictionary',
-);
-
-#------------------------------------------------------------------------------
-# Extract information from PDF file
-# Inputs: 0) ExifTool object reference, 1) dirInfo reference
-# Returns: 1 if this was a valid PDF file
-sub ProcessPDF($$)
-{
-    my ($et, $dirInfo) = @_;
-
-    undef $cryptInfo;   # (must not delete after returning so writer can use it)
-    undef $cryptStream;
-    undef $cryptString;
-    my $result = ReadPDF($et, $dirInfo);
-    if ($result < 0) {
-        $et->Warn($pdfWarning{$result}) if $pdfWarning{$result};
-        $result = 1;
-    }
-    # clean up and return
-    undef %streamObjs;
-    undef %fetched;
-    return $result;
-}
-
-1; # end
-
-
-__END__
-
-=head1 NAME
-
-Image::ExifTool::PDF - Read PDF meta information
-
-=head1 SYNOPSIS
-
-This module is loaded automatically by Image::ExifTool when required.
-
-=head1 DESCRIPTION
-
-This code reads meta information from PDF (Adobe Portable Document Format)
-files.  It supports object streams introduced in PDF-1.5 but only with a
-limited set of Filter and Predictor algorithms, however all standard
-encryption methods through PDF-1.7 extension level 3 are supported,
-including AESV2 (AES-128) and AESV3 (AES-256).
-
-=head1 AUTHOR
-
-Copyright 2003-2015, Phil Harvey (phil at owl.phy.queensu.ca)
-
-This library is free software; you can redistribute it and/or modify it
-under the same terms as Perl itself.
-
-=head1 REFERENCES
-
-=over 4
-
-=item L<http://partners.adobe.com/public/developer/pdf/index_reference.html>
-
-=item L<Crypt::RC4|Crypt::RC4>
-
-=item L<http://www.adobe.com/devnet/acrobat/pdfs/PDF32000_2008.pdf>
-
-=item L<http://www.adobe.com/content/dam/Adobe/en/devnet/pdf/pdfs/adobe_supplement_iso32000.pdf>
-
-=item L<http://tools.ietf.org/search/rfc3454>
-
-=item L<http://www.armware.dk/RFC/rfc/rfc4013.html>
-
-=back
-
-=head1 SEE ALSO
-
-L<Image::ExifTool::TagNames/PDF Tags>,
-L<Image::ExifTool(3pm)|Image::ExifTool>
-
-=cut