embeditor-rails 2.0.0.beta → 2.0.0

data/lib/node_modules/npm/scripts/clean-old.sh

@@ -1,165 +0,0 @@
-#!/bin/bash
-
-# look for old 0.x cruft, and get rid of it.
-# Should already be sitting in the npm folder.
-
-# This doesn't have to be quite as cross-platform as install.sh.
-# There are some bash-isms, because maintaining *two*
-# fully-portable posix/bourne sh scripts is too much for
-# one project with a sane maintainer.
-
-# If readlink isn't available, then this is just too tricky.
-# However, greadlink is fine, so Solaris can join the party, too.
-readlink="readlink"
-which $readlink >/dev/null 2>/dev/null
-if [ $? -ne 0 ]; then
-  readlink="greadlink"
-  which $readlink >/dev/null 2>/dev/null
-  if [ $? -ne 0 ]; then
-    echo "Can't find the readlink or greadlink command. Aborting."
-    exit 1
-  fi
-fi
-
-if [ "x$npm_config_prefix" != "x" ]; then
-  PREFIXES=$npm_config_prefix
-else
-  node="$NODE"
-  if [ "x$node" = "x" ]; then
-    node=`which node`
-  fi
-  if [ "x$node" = "x" ]; then
-    echo "Can't find node to determine prefix. Aborting."
-    exit 1
-  fi
-
-
-  PREFIX=`dirname $node`
-  PREFIX=`dirname $PREFIX`
-  echo "cleanup prefix=$PREFIX"
-  PREFIXES=$PREFIX
-
-  altprefix=`"$node" -e process.installPrefix`
-  if [ "x$altprefix" != "x" ] && [ "x$altprefix" != "x$PREFIX" ]; then
-    echo "altprefix=$altprefix"
-    PREFIXES="$PREFIX $altprefix"
-  fi
-fi
-
-# now prefix is where npm would be rooted by default
-# go hunting.
-
-packages=
-for prefix in $PREFIXES; do
-  packages="$packages
-    "`ls "$prefix"/lib/node/.npm 2>/dev/null | grep -v .cache`
-done
-
-packages=`echo $packages`
-
-filelist=()
-fid=0
-
-for prefix in $PREFIXES; do
-  # remove any links into the .npm dir, or links to
-  # version-named shims/symlinks.
-  for folder in share/man bin lib/node; do
-    find $prefix/$folder -type l | while read file; do
-      target=`$readlink $file | grep '/\.npm/'`
-      if [ "x$target" != "x" ]; then
-        # found one!
-        filelist[$fid]="$file"
-        let 'fid++'
-        # also remove any symlinks to this file.
-        base=`basename "$file"`
-        base=`echo "$base" | awk -F@ '{print $1}'`
-        if [ "x$base" != "x" ]; then
-          find "`dirname $file`" -type l -name "$base"'*' \
-          | while read l; do
-              target=`$readlink "$l" | grep "$base"`
-              if [ "x$target" != "x" ]; then
-                filelist[$fid]="$1"
-                let 'fid++'
-              fi
-            done
-        fi
-      fi
-    done
-
-    # Scour for shim files.  These are relics of 0.2 npm installs.
-    # note: grep -r is not portable.
-    find $prefix/$folder -type f \
-      | xargs grep -sl '// generated by npm' \
-      | while read file; do
-          filelist[$fid]="$file"
-          let 'fid++'
-        done
-  done
-
-  # now remove the package modules, and the .npm folder itself.
-  if [ "x$packages" != "x" ]; then
-    for pkg in $packages; do
-      filelist[$fid]="$prefix/lib/node/$pkg"
-      let 'fid++'
-      for i in $prefix/lib/node/$pkg\@*; do
-        filelist[$fid]="$i"
-        let 'fid++'
-      done
-    done
-  fi
-
-  for folder in lib/node/.npm lib/npm share/npm; do
-    if [ -d $prefix/$folder ]; then
-      filelist[$fid]="$prefix/$folder"
-      let 'fid++'
-    fi
-  done
-done
-
-# now actually clean, but only if there's anything TO clean
-if [ "${#filelist[@]}" -gt 0 ]; then
-  echo ""
-  echo "This script will find and eliminate any shims, symbolic"
-  echo "links, and other cruft that was installed by npm 0.x."
-  echo ""
-
-  if [ "x$packages" != "x" ]; then
-    echo "The following packages appear to have been installed with"
-    echo "an old version of npm, and will be removed forcibly:"
-    for pkg in $packages; do
-      echo "    $pkg"
-    done
-    echo "Make a note of these. You may want to install them"
-    echo "with npm 1.0 when this process is completed."
-    echo ""
-  fi
-
-  OK=
-  if [ "x$1" = "x-y" ]; then
-    OK="yes"
-  fi
-
-  while [ "$OK" != "y" ] && [ "$OK" != "yes" ] && [ "$OK" != "no" ]; do
-    echo "Is this OK?"
-    echo "  enter 'yes' or 'no'"
-    echo "  or 'show' to see a list of files "
-    read OK
-    if [ "x$OK" = "xshow" ] || [ "x$OK" = "xs" ]; then
-      for i in "${filelist[@]}"; do
-        echo "$i"
-      done
-    fi
-  done
-  if [ "$OK" = "no" ]; then
-    echo "Aborting"
-    exit 1
-  fi
-  for i in "${filelist[@]}"; do
-    rm -rf "$i"
-  done
-fi
-
-echo ""
-echo 'All clean!'
-
-exit 0

data/lib/node_modules/npm/scripts/doc-build.sh

@@ -1,84 +0,0 @@
-#!/usr/bin/env bash
-
-if [[ $DEBUG != "" ]]; then
-  set -x
-fi
-set -o errexit
-set -o pipefail
-
-if ! [ -x node_modules/.bin/ronn ]; then
-  ps=0
-  if [ -f .building_ronn ]; then
-    pid=$(cat .building_ronn)
-    ps=$(ps -p $pid | grep $pid | wc -l) || true
-  fi
-
-  if [ -f .building_ronn ] && [ $ps != 0 ]; then
-    while [ -f .building_ronn ]; do
-      sleep 1
-    done
-  else
-    # a race to see which make process will be the one to install ronn
-    echo $$ > .building_ronn
-    sleep 1
-    if [ $(cat .building_ronn) == $$ ]; then
-      make node_modules/.bin/ronn
-      rm .building_ronn
-    else
-      while [ -f .building_ronn ]; do
-        sleep 1
-      done
-    fi
-  fi
-fi
-
-src=$1
-dest=$2
-name=$(basename ${src%.*})
-date=$(date -u +'%Y-%M-%d %H:%m:%S')
-version=$(node cli.js -v)
-
-mkdir -p $(dirname $dest)
-
-case $dest in
-  *.[1357])
-    ./node_modules/.bin/ronn --roff $src \
-    | sed "s|@VERSION@|$version|g" \
-    | perl -pi -e 's/(npm\\-)?([^\(]*)\(1\)/npm help \2/g' \
-    | perl -pi -e 's/(npm\\-)?([^\(]*)\([57]\)/npm help \3 \2/g' \
-    | perl -pi -e 's/(npm\\-)?([^\(]*)\(3\)/npm apihelp \2/g' \
-    | perl -pi -e 's/npm\(1\)/npm help npm/g' \
-    | perl -pi -e 's/npm\(3\)/npm apihelp npm/g' \
-    > $dest
-    exit $?
-    ;;
-  *.html)
-    (cat html/dochead.html && \
-     ./node_modules/.bin/ronn -f $src &&
-     cat html/docfoot.html)\
-    | sed "s|@NAME@|$name|g" \
-    | sed "s|@DATE@|$date|g" \
-    | sed "s|@VERSION@|$version|g" \
-    | perl -pi -e 's/<h1>([^\(]*\([0-9]\)) -- (.*?)<\/h1>/<h1>\1<\/h1> <p>\2<\/p>/g' \
-    | perl -pi -e 's/npm-npm/npm/g' \
-    | perl -pi -e 's/([^"-])(npm-)?README(\(1\))?/\1<a href="..\/..\/doc\/README.html">README<\/a>/g' \
-    | perl -pi -e 's/<title><a href="[^"]+README.html">README<\/a><\/title>/<title>README<\/title>/g' \
-    | perl -pi -e 's/([^"-])([^\(> ]+)(\(1\))/\1<a href="..\/cli\/\2.html">\2\3<\/a>/g' \
-    | perl -pi -e 's/([^"-])([^\(> ]+)(\(3\))/\1<a href="..\/api\/\2.html">\2\3<\/a>/g' \
-    | perl -pi -e 's/([^"-])([^\(> ]+)(\(5\))/\1<a href="..\/files\/\2.html">\2\3<\/a>/g' \
-    | perl -pi -e 's/([^"-])([^\(> ]+)(\(7\))/\1<a href="..\/misc\/\2.html">\2\3<\/a>/g' \
-    | perl -pi -e 's/\([1357]\)<\/a><\/h1>/<\/a><\/h1>/g' \
-    | (if [ $(basename $(dirname $dest)) == "doc" ]; then
-        perl -pi -e 's/ href="\.\.\// href="/g'
-      else
-        cat
-      fi) \
-    > $dest \
-    && cat html/docfoot-script.html >> $dest
-    exit $?
-    ;;
-  *)
-    echo "Invalid destination type: $dest" >&2
-    exit 1
-    ;;
-esac

data/lib/node_modules/npm/scripts/index-build.js

@@ -1,62 +0,0 @@
-#!/usr/bin/env node
-var fs = require("fs")
-  , path = require("path")
-  , root = path.resolve(__dirname, "..")
-  , glob = require("glob")
-  , conversion = { "cli": 1, "api": 3, "files": 5, "misc": 7 }
-
-glob(root + "/{README.md,doc/*/*.md}", function (er, files) {
-  if (er)
-    throw er
-  output(files.map(function (f) {
-    var b = path.basename(f)
-    if (b === "README.md")
-      return [0, b]
-    if (b === "index.md")
-      return null
-    var s = conversion[path.basename(path.dirname(f))]
-    return [s, f]
-  }).filter(function (f) {
-    return f
-  }).sort(function (a, b) {
-    return (a[0] === b[0])
-           ? ( path.basename(a[1]) === "npm.md" ? -1
-             : path.basename(b[1]) === "npm.md" ? 1
-             : a[1] > b[1] ? 1 : -1 )
-           : a[0] - b[0]
-  }))
-})
-
-return
-
-function output (files) {
-  console.log(
-    "npm-index(7) -- Index of all npm documentation\n" +
-    "==============================================\n")
-
-  writeLines(files, 0)
-  writeLines(files, 1, "Command Line Documentation")
-  writeLines(files, 3, "API Documentation")
-  writeLines(files, 5, "Files")
-  writeLines(files, 7, "Misc")
-}
-
-function writeLines (files, sxn, heading) {
-  if (heading)
-    console.log("# %s\n", heading)
-  files.filter(function (f) {
-    return f[0] === sxn
-  }).forEach(writeLine)
-}
-
-
-function writeLine (sd) {
-  var sxn = sd[0] || 1
-    , doc = sd[1]
-    , d = path.basename(doc, ".md")
-
-  var content = fs.readFileSync(doc, "utf8").split("\n")[0].split("-- ")[1]
-
-  console.log("## %s(%d)\n", d, sxn)
-  console.log(content + "\n")
-}

data/lib/node_modules/npm/scripts/install.sh

@@ -1,313 +0,0 @@
-#!/bin/sh
-
-# A word about this shell script:
-#
-# It must work everywhere, including on systems that lack
-# a /bin/bash, map 'sh' to ksh, ksh97, bash, ash, or zsh,
-# and potentially have either a posix shell or bourne
-# shell living at /bin/sh.
-#
-# See this helpful document on writing portable shell scripts:
-# http://www.gnu.org/s/hello/manual/autoconf/Portable-Shell.html
-#
-# The only shell it won't ever work on is cmd.exe.
-
-if [ "x$0" = "xsh" ]; then
-  # run as curl | sh
-  # on some systems, you can just do cat>npm-install.sh
-  # which is a bit cuter.  But on others, &1 is already closed,
-  # so catting to another script file won't do anything.
-  # Follow Location: headers, and fail on errors
-  curl -f -L -s https://www.npmjs.org/install.sh > npm-install-$$.sh
-  ret=$?
-  if [ $ret -eq 0 ]; then
-    (exit 0)
-  else
-    rm npm-install-$$.sh
-    echo "Failed to download script" >&2
-    exit $ret
-  fi
-  sh npm-install-$$.sh
-  ret=$?
-  rm npm-install-$$.sh
-  exit $ret
-fi
-
-# See what "npm_config_*" things there are in the env,
-# and make them permanent.
-# If this fails, it's not such a big deal.
-configures="`env | grep 'npm_config_' | sed -e 's|^npm_config_||g'`"
-
-npm_config_loglevel="error"
-if [ "x$npm_debug" = "x" ]; then
-  (exit 0)
-else
-  echo "Running in debug mode."
-  echo "Note that this requires bash or zsh."
-  set -o xtrace
-  set -o pipefail
-  npm_config_loglevel="verbose"
-fi
-export npm_config_loglevel
-
-# make sure that node exists
-node=`which node 2>&1`
-ret=$?
-if [ $ret -eq 0 ] && [ -x "$node" ]; then
-  (exit 0)
-else
-  echo "npm cannot be installed without nodejs." >&2
-  echo "Install node first, and then try again." >&2
-  echo "" >&2
-  echo "Maybe node is installed, but not in the PATH?" >&2
-  echo "Note that running as sudo can change envs." >&2
-  echo ""
-  echo "PATH=$PATH" >&2
-  exit $ret
-fi
-
-# set the temp dir
-TMP="${TMPDIR}"
-if [ "x$TMP" = "x" ]; then
-  TMP="/tmp"
-fi
-TMP="${TMP}/npm.$$"
-rm -rf "$TMP" || true
-mkdir "$TMP"
-if [ $? -ne 0 ]; then
-  echo "failed to mkdir $TMP" >&2
-  exit 1
-fi
-
-BACK="$PWD"
-
-ret=0
-tar="${TAR}"
-if [ -z "$tar" ]; then
-  tar="${npm_config_tar}"
-fi
-if [ -z "$tar" ]; then
-  tar=`which tar 2>&1`
-  ret=$?
-fi
-
-if [ $ret -eq 0 ] && [ -x "$tar" ]; then
-  echo "tar=$tar"
-  echo "version:"
-  $tar --version
-  ret=$?
-fi
-
-if [ $ret -eq 0 ]; then
-  (exit 0)
-else
-  echo "No suitable tar program found."
-  exit 1
-fi
-
-
-
-# Try to find a suitable make
-# If the MAKE environment var is set, use that.
-# otherwise, try to find gmake, and then make.
-# If no make is found, then just execute the necessary commands.
-
-# XXX For some reason, make is building all the docs every time.  This
-# is an annoying source of bugs. Figure out why this happens.
-MAKE=NOMAKE
-
-if [ "x$MAKE" = "x" ]; then
-  make=`which gmake 2>&1`
-  if [ $? -eq 0 ] && [ -x $make ]; then
-    (exit 0)
-  else
-    make=`which make 2>&1`
-    if [ $? -eq 0 ] && [ -x $make ]; then
-      (exit 0)
-    else
-      make=NOMAKE
-    fi
-  fi
-else
-  make="$MAKE"
-fi
-
-if [ -x "$make" ]; then
-  (exit 0)
-else
-  # echo "Installing without make. This may fail." >&2
-  make=NOMAKE
-fi
-
-# If there's no bash, then don't even try to clean
-if [ -x "/bin/bash" ]; then
-  (exit 0)
-else
-  clean="no"
-fi
-
-node_version=`"$node" --version 2>&1`
-ret=$?
-if [ $ret -ne 0 ]; then
-  echo "You need node to run this program." >&2
-  echo "node --version reports: $node_version" >&2
-  echo "with exit code = $ret" >&2
-  echo "Please install node before continuing." >&2
-  exit $ret
-fi
-
-t="${npm_install}"
-if [ -z "$t" ]; then
-  # switch based on node version.
-  # note that we can only use strict sh-compatible patterns here.
-  case $node_version in
-    0.[012345].* | v0.[012345].*)
-      echo "You are using an outdated and unsupported version of" >&2
-      echo "node ($node_version).  Please update node and try again." >&2
-      exit 99
-      ;;
-    v0.[678].* | 0.[678].*)
-      echo "install npm@1.1"
-      t=1.1
-      ;;
-    *)
-      echo "install npm@latest"
-      t="latest"
-      ;;
-  esac
-fi
-
-# the npmca cert
-cacert='
------BEGIN CERTIFICATE-----
-MIIChzCCAfACCQDauvz/KHp8ejANBgkqhkiG9w0BAQUFADCBhzELMAkGA1UEBhMC
-VVMxCzAJBgNVBAgTAkNBMRAwDgYDVQQHEwdPYWtsYW5kMQwwCgYDVQQKEwNucG0x
-IjAgBgNVBAsTGW5wbSBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxDjAMBgNVBAMTBW5w
-bUNBMRcwFQYJKoZIhvcNAQkBFghpQGl6cy5tZTAeFw0xMTA5MDUwMTQ3MTdaFw0y
-MTA5MDIwMTQ3MTdaMIGHMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0ExEDAOBgNV
-BAcTB09ha2xhbmQxDDAKBgNVBAoTA25wbTEiMCAGA1UECxMZbnBtIENlcnRpZmlj
-YXRlIEF1dGhvcml0eTEOMAwGA1UEAxMFbnBtQ0ExFzAVBgkqhkiG9w0BCQEWCGlA
-aXpzLm1lMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDLI4tIqPpRW+ACw9GE
-OgBlJZwK5f8nnKCLK629Pv5yJpQKs3DENExAyOgDcyaF0HD0zk8zTp+ZsLaNdKOz
-Gn2U181KGprGKAXP6DU6ByOJDWmTlY6+Ad1laYT0m64fERSpHw/hjD3D+iX4aMOl
-y0HdbT5m1ZGh6SJz3ZqxavhHLQIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAC4ySDbC
-l7W1WpLmtLGEQ/yuMLUf6Jy/vr+CRp4h+UzL+IQpCv8FfxsYE7dhf/bmWTEupBkv
-yNL18lipt2jSvR3v6oAHAReotvdjqhxddpe5Holns6EQd1/xEZ7sB1YhQKJtvUrl
-ZNufy1Jf1r0ldEGeA+0ISck7s+xSh9rQD2Op
------END CERTIFICATE-----
-'
-
-echo "$cacert" > "$TMP/cafile.crt"
-cacert="$TMP/cafile.crt"
-
-# need to echo "" after, because Posix sed doesn't treat EOF
-# as an implied end of line.
-url=`(curl -SsL --cacert "$cacert" https://registry.npmjs.org/npm/$t; echo "") \
-     | sed -e 's/^.*tarball":"//' \
-     | sed -e 's/".*$//'`
-
-ret=$?
-if [ "x$url" = "x" ]; then
-  ret=125
-  # try without the -e arg to sed.
-  url=`(curl -SsL --cacert "$cacert" https://registry.npmjs.org/npm/$t; echo "") \
-       | sed 's/^.*tarball":"//' \
-       | sed 's/".*$//'`
-  ret=$?
-  if [ "x$url" = "x" ]; then
-    ret=125
-  fi
-fi
-if [ $ret -ne 0 ]; then
-  echo "Failed to get tarball url for npm/$t" >&2
-  exit $ret
-fi
-
-
-echo "fetching: $url" >&2
-
-cd "$TMP" \
-  && curl -SsL --cacert "$cacert" "$url" \
-     | $tar -xzf - \
-  && rm "$cacert" \
-  && cd "$TMP"/* \
-  && (req=`"$node" bin/read-package-json.js package.json engines.node`
-      if [ -d node_modules ]; then
-        "$node" node_modules/semver/bin/semver -v "$node_version" -r "$req"
-        ret=$?
-      else
-        "$node" bin/semver.js -v "$node_version" -r "$req"
-        ret=$?
-      fi
-      if [ $ret -ne 0 ]; then
-        echo "You need node $req to run this program." >&2
-        echo "node --version reports: $node_version" >&2
-        echo "Please upgrade node before continuing." >&2
-        exit $ret
-      fi) \
-  && (ver=`"$node" bin/read-package-json.js package.json version`
-      isnpm10=0
-      if [ $ret -eq 0 ]; then
-        req=`"$node" bin/read-package-json.js package.json engines.node`
-        if [ -d node_modules ]; then
-          if "$node" node_modules/semver/bin/semver -v "$ver" -r "1"
-          then
-            isnpm10=1
-          fi
-        else
-          if "$node" bin/semver -v "$ver" -r ">=1.0"; then
-            isnpm10=1
-          fi
-        fi
-      fi
-
-      ret=0
-      if [ $isnpm10 -eq 1 ] && [ -f "scripts/clean-old.sh" ]; then
-        if [ "x$skipclean" = "x" ]; then
-          (exit 0)
-        else
-          clean=no
-        fi
-        if [ "x$clean" = "xno" ] \
-            || [ "x$clean" = "xn" ]; then
-          echo "Skipping 0.x cruft clean" >&2
-          ret=0
-        elif [ "x$clean" = "xy" ] || [ "x$clean" = "xyes" ]; then
-          NODE="$node" /bin/bash "scripts/clean-old.sh" "-y"
-          ret=$?
-        else
-          NODE="$node" /bin/bash "scripts/clean-old.sh" </dev/tty
-          ret=$?
-        fi
-      fi
-
-      if [ $ret -ne 0 ]; then
-        echo "Aborted 0.x cleanup.  Exiting." >&2
-        exit $ret
-      fi) \
-  && (if [ "x$configures" = "x" ]; then
-        (exit 0)
-      else
-        echo "./configure "$configures
-        echo "$configures" > npmrc
-      fi) \
-  && (if [ "$make" = "NOMAKE" ]; then
-        (exit 0)
-      elif "$make" uninstall install; then
-        (exit 0)
-      else
-        make="NOMAKE"
-      fi
-      if [ "$make" = "NOMAKE" ]; then
-        "$node" cli.js rm npm -gf
-        "$node" cli.js install -gf
-      fi) \
-  && cd "$BACK" \
-  && rm -rf "$TMP" \
-  && echo "It worked"
-
-ret=$?
-if [ $ret -ne 0 ]; then
-  echo "It failed" >&2
-fi
-exit $ret