embeditor-rails 1.1.1 → 2.0.0.beta

data/lib/node_modules/npm/scripts/clean-old.sh

@@ -0,0 +1,165 @@
+#!/bin/bash
+
+# look for old 0.x cruft, and get rid of it.
+# Should already be sitting in the npm folder.
+
+# This doesn't have to be quite as cross-platform as install.sh.
+# There are some bash-isms, because maintaining *two*
+# fully-portable posix/bourne sh scripts is too much for
+# one project with a sane maintainer.
+
+# If readlink isn't available, then this is just too tricky.
+# However, greadlink is fine, so Solaris can join the party, too.
+readlink="readlink"
+which $readlink >/dev/null 2>/dev/null
+if [ $? -ne 0 ]; then
+  readlink="greadlink"
+  which $readlink >/dev/null 2>/dev/null
+  if [ $? -ne 0 ]; then
+    echo "Can't find the readlink or greadlink command. Aborting."
+    exit 1
+  fi
+fi
+
+if [ "x$npm_config_prefix" != "x" ]; then
+  PREFIXES=$npm_config_prefix
+else
+  node="$NODE"
+  if [ "x$node" = "x" ]; then
+    node=`which node`
+  fi
+  if [ "x$node" = "x" ]; then
+    echo "Can't find node to determine prefix. Aborting."
+    exit 1
+  fi
+
+
+  PREFIX=`dirname $node`
+  PREFIX=`dirname $PREFIX`
+  echo "cleanup prefix=$PREFIX"
+  PREFIXES=$PREFIX
+
+  altprefix=`"$node" -e process.installPrefix`
+  if [ "x$altprefix" != "x" ] && [ "x$altprefix" != "x$PREFIX" ]; then
+    echo "altprefix=$altprefix"
+    PREFIXES="$PREFIX $altprefix"
+  fi
+fi
+
+# now prefix is where npm would be rooted by default
+# go hunting.
+
+packages=
+for prefix in $PREFIXES; do
+  packages="$packages
+    "`ls "$prefix"/lib/node/.npm 2>/dev/null | grep -v .cache`
+done
+
+packages=`echo $packages`
+
+filelist=()
+fid=0
+
+for prefix in $PREFIXES; do
+  # remove any links into the .npm dir, or links to
+  # version-named shims/symlinks.
+  for folder in share/man bin lib/node; do
+    find $prefix/$folder -type l | while read file; do
+      target=`$readlink $file | grep '/\.npm/'`
+      if [ "x$target" != "x" ]; then
+        # found one!
+        filelist[$fid]="$file"
+        let 'fid++'
+        # also remove any symlinks to this file.
+        base=`basename "$file"`
+        base=`echo "$base" | awk -F@ '{print $1}'`
+        if [ "x$base" != "x" ]; then
+          find "`dirname $file`" -type l -name "$base"'*' \
+          | while read l; do
+              target=`$readlink "$l" | grep "$base"`
+              if [ "x$target" != "x" ]; then
+                filelist[$fid]="$1"
+                let 'fid++'
+              fi
+            done
+        fi
+      fi
+    done
+
+    # Scour for shim files.  These are relics of 0.2 npm installs.
+    # note: grep -r is not portable.
+    find $prefix/$folder -type f \
+      | xargs grep -sl '// generated by npm' \
+      | while read file; do
+          filelist[$fid]="$file"
+          let 'fid++'
+        done
+  done
+
+  # now remove the package modules, and the .npm folder itself.
+  if [ "x$packages" != "x" ]; then
+    for pkg in $packages; do
+      filelist[$fid]="$prefix/lib/node/$pkg"
+      let 'fid++'
+      for i in $prefix/lib/node/$pkg\@*; do
+        filelist[$fid]="$i"
+        let 'fid++'
+      done
+    done
+  fi
+
+  for folder in lib/node/.npm lib/npm share/npm; do
+    if [ -d $prefix/$folder ]; then
+      filelist[$fid]="$prefix/$folder"
+      let 'fid++'
+    fi
+  done
+done
+
+# now actually clean, but only if there's anything TO clean
+if [ "${#filelist[@]}" -gt 0 ]; then
+  echo ""
+  echo "This script will find and eliminate any shims, symbolic"
+  echo "links, and other cruft that was installed by npm 0.x."
+  echo ""
+
+  if [ "x$packages" != "x" ]; then
+    echo "The following packages appear to have been installed with"
+    echo "an old version of npm, and will be removed forcibly:"
+    for pkg in $packages; do
+      echo "    $pkg"
+    done
+    echo "Make a note of these. You may want to install them"
+    echo "with npm 1.0 when this process is completed."
+    echo ""
+  fi
+
+  OK=
+  if [ "x$1" = "x-y" ]; then
+    OK="yes"
+  fi
+
+  while [ "$OK" != "y" ] && [ "$OK" != "yes" ] && [ "$OK" != "no" ]; do
+    echo "Is this OK?"
+    echo "  enter 'yes' or 'no'"
+    echo "  or 'show' to see a list of files "
+    read OK
+    if [ "x$OK" = "xshow" ] || [ "x$OK" = "xs" ]; then
+      for i in "${filelist[@]}"; do
+        echo "$i"
+      done
+    fi
+  done
+  if [ "$OK" = "no" ]; then
+    echo "Aborting"
+    exit 1
+  fi
+  for i in "${filelist[@]}"; do
+    rm -rf "$i"
+  done
+fi
+
+echo ""
+echo 'All clean!'
+
+exit 0

data/lib/node_modules/npm/scripts/doc-build.sh

@@ -0,0 +1,84 @@
+#!/usr/bin/env bash
+
+if [[ $DEBUG != "" ]]; then
+  set -x
+fi
+set -o errexit
+set -o pipefail
+
+if ! [ -x node_modules/.bin/ronn ]; then
+  ps=0
+  if [ -f .building_ronn ]; then
+    pid=$(cat .building_ronn)
+    ps=$(ps -p $pid | grep $pid | wc -l) || true
+  fi
+
+  if [ -f .building_ronn ] && [ $ps != 0 ]; then
+    while [ -f .building_ronn ]; do
+      sleep 1
+    done
+  else
+    # a race to see which make process will be the one to install ronn
+    echo $$ > .building_ronn
+    sleep 1
+    if [ $(cat .building_ronn) == $$ ]; then
+      make node_modules/.bin/ronn
+      rm .building_ronn
+    else
+      while [ -f .building_ronn ]; do
+        sleep 1
+      done
+    fi
+  fi
+fi
+
+src=$1
+dest=$2
+name=$(basename ${src%.*})
+date=$(date -u +'%Y-%M-%d %H:%m:%S')
+version=$(node cli.js -v)
+
+mkdir -p $(dirname $dest)
+
+case $dest in
+  *.[1357])
+    ./node_modules/.bin/ronn --roff $src \
+    | sed "s|@VERSION@|$version|g" \
+    | perl -pi -e 's/(npm\\-)?([^\(]*)\(1\)/npm help \2/g' \
+    | perl -pi -e 's/(npm\\-)?([^\(]*)\([57]\)/npm help \3 \2/g' \
+    | perl -pi -e 's/(npm\\-)?([^\(]*)\(3\)/npm apihelp \2/g' \
+    | perl -pi -e 's/npm\(1\)/npm help npm/g' \
+    | perl -pi -e 's/npm\(3\)/npm apihelp npm/g' \
+    > $dest
+    exit $?
+    ;;
+  *.html)
+    (cat html/dochead.html && \
+     ./node_modules/.bin/ronn -f $src &&
+     cat html/docfoot.html)\
+    | sed "s|@NAME@|$name|g" \
+    | sed "s|@DATE@|$date|g" \
+    | sed "s|@VERSION@|$version|g" \
+    | perl -pi -e 's/<h1>([^\(]*\([0-9]\)) -- (.*?)<\/h1>/<h1>\1<\/h1> <p>\2<\/p>/g' \
+    | perl -pi -e 's/npm-npm/npm/g' \
+    | perl -pi -e 's/([^"-])(npm-)?README(\(1\))?/\1<a href="..\/..\/doc\/README.html">README<\/a>/g' \
+    | perl -pi -e 's/<title><a href="[^"]+README.html">README<\/a><\/title>/<title>README<\/title>/g' \
+    | perl -pi -e 's/([^"-])([^\(> ]+)(\(1\))/\1<a href="..\/cli\/\2.html">\2\3<\/a>/g' \
+    | perl -pi -e 's/([^"-])([^\(> ]+)(\(3\))/\1<a href="..\/api\/\2.html">\2\3<\/a>/g' \
+    | perl -pi -e 's/([^"-])([^\(> ]+)(\(5\))/\1<a href="..\/files\/\2.html">\2\3<\/a>/g' \
+    | perl -pi -e 's/([^"-])([^\(> ]+)(\(7\))/\1<a href="..\/misc\/\2.html">\2\3<\/a>/g' \
+    | perl -pi -e 's/\([1357]\)<\/a><\/h1>/<\/a><\/h1>/g' \
+    | (if [ $(basename $(dirname $dest)) == "doc" ]; then
+        perl -pi -e 's/ href="\.\.\// href="/g'
+      else
+        cat
+      fi) \
+    > $dest \
+    && cat html/docfoot-script.html >> $dest
+    exit $?
+    ;;
+  *)
+    echo "Invalid destination type: $dest" >&2
+    exit 1
+    ;;
+esac

data/lib/node_modules/npm/scripts/index-build.js

@@ -0,0 +1,62 @@
+#!/usr/bin/env node
+var fs = require("fs")
+  , path = require("path")
+  , root = path.resolve(__dirname, "..")
+  , glob = require("glob")
+  , conversion = { "cli": 1, "api": 3, "files": 5, "misc": 7 }
+
+glob(root + "/{README.md,doc/*/*.md}", function (er, files) {
+  if (er)
+    throw er
+  output(files.map(function (f) {
+    var b = path.basename(f)
+    if (b === "README.md")
+      return [0, b]
+    if (b === "index.md")
+      return null
+    var s = conversion[path.basename(path.dirname(f))]
+    return [s, f]
+  }).filter(function (f) {
+    return f
+  }).sort(function (a, b) {
+    return (a[0] === b[0])
+           ? ( path.basename(a[1]) === "npm.md" ? -1
+             : path.basename(b[1]) === "npm.md" ? 1
+             : a[1] > b[1] ? 1 : -1 )
+           : a[0] - b[0]
+  }))
+})
+
+return
+
+function output (files) {
+  console.log(
+    "npm-index(7) -- Index of all npm documentation\n" +
+    "==============================================\n")
+
+  writeLines(files, 0)
+  writeLines(files, 1, "Command Line Documentation")
+  writeLines(files, 3, "API Documentation")
+  writeLines(files, 5, "Files")
+  writeLines(files, 7, "Misc")
+}
+
+function writeLines (files, sxn, heading) {
+  if (heading)
+    console.log("# %s\n", heading)
+  files.filter(function (f) {
+    return f[0] === sxn
+  }).forEach(writeLine)
+}
+
+
+function writeLine (sd) {
+  var sxn = sd[0] || 1
+    , doc = sd[1]
+    , d = path.basename(doc, ".md")
+
+  var content = fs.readFileSync(doc, "utf8").split("\n")[0].split("-- ")[1]
+
+  console.log("## %s(%d)\n", d, sxn)
+  console.log(content + "\n")
+}

data/lib/node_modules/npm/scripts/install.sh

@@ -0,0 +1,313 @@
+#!/bin/sh
+
+# A word about this shell script:
+#
+# It must work everywhere, including on systems that lack
+# a /bin/bash, map 'sh' to ksh, ksh97, bash, ash, or zsh,
+# and potentially have either a posix shell or bourne
+# shell living at /bin/sh.
+#
+# See this helpful document on writing portable shell scripts:
+# http://www.gnu.org/s/hello/manual/autoconf/Portable-Shell.html
+#
+# The only shell it won't ever work on is cmd.exe.
+
+if [ "x$0" = "xsh" ]; then
+  # run as curl | sh
+  # on some systems, you can just do cat>npm-install.sh
+  # which is a bit cuter.  But on others, &1 is already closed,
+  # so catting to another script file won't do anything.
+  # Follow Location: headers, and fail on errors
+  curl -f -L -s https://www.npmjs.org/install.sh > npm-install-$$.sh
+  ret=$?
+  if [ $ret -eq 0 ]; then
+    (exit 0)
+  else
+    rm npm-install-$$.sh
+    echo "Failed to download script" >&2
+    exit $ret
+  fi
+  sh npm-install-$$.sh
+  ret=$?
+  rm npm-install-$$.sh
+  exit $ret
+fi
+
+# See what "npm_config_*" things there are in the env,
+# and make them permanent.
+# If this fails, it's not such a big deal.
+configures="`env | grep 'npm_config_' | sed -e 's|^npm_config_||g'`"
+
+npm_config_loglevel="error"
+if [ "x$npm_debug" = "x" ]; then
+  (exit 0)
+else
+  echo "Running in debug mode."
+  echo "Note that this requires bash or zsh."
+  set -o xtrace
+  set -o pipefail
+  npm_config_loglevel="verbose"
+fi
+export npm_config_loglevel
+
+# make sure that node exists
+node=`which node 2>&1`
+ret=$?
+if [ $ret -eq 0 ] && [ -x "$node" ]; then
+  (exit 0)
+else
+  echo "npm cannot be installed without nodejs." >&2
+  echo "Install node first, and then try again." >&2
+  echo "" >&2
+  echo "Maybe node is installed, but not in the PATH?" >&2
+  echo "Note that running as sudo can change envs." >&2
+  echo ""
+  echo "PATH=$PATH" >&2
+  exit $ret
+fi
+
+# set the temp dir
+TMP="${TMPDIR}"
+if [ "x$TMP" = "x" ]; then
+  TMP="/tmp"
+fi
+TMP="${TMP}/npm.$$"
+rm -rf "$TMP" || true
+mkdir "$TMP"
+if [ $? -ne 0 ]; then
+  echo "failed to mkdir $TMP" >&2
+  exit 1
+fi
+
+BACK="$PWD"
+
+ret=0
+tar="${TAR}"
+if [ -z "$tar" ]; then
+  tar="${npm_config_tar}"
+fi
+if [ -z "$tar" ]; then
+  tar=`which tar 2>&1`
+  ret=$?
+fi
+
+if [ $ret -eq 0 ] && [ -x "$tar" ]; then
+  echo "tar=$tar"
+  echo "version:"
+  $tar --version
+  ret=$?
+fi
+
+if [ $ret -eq 0 ]; then
+  (exit 0)
+else
+  echo "No suitable tar program found."
+  exit 1
+fi
+
+
+
+# Try to find a suitable make
+# If the MAKE environment var is set, use that.
+# otherwise, try to find gmake, and then make.
+# If no make is found, then just execute the necessary commands.
+
+# XXX For some reason, make is building all the docs every time.  This
+# is an annoying source of bugs. Figure out why this happens.
+MAKE=NOMAKE
+
+if [ "x$MAKE" = "x" ]; then
+  make=`which gmake 2>&1`
+  if [ $? -eq 0 ] && [ -x $make ]; then
+    (exit 0)
+  else
+    make=`which make 2>&1`
+    if [ $? -eq 0 ] && [ -x $make ]; then
+      (exit 0)
+    else
+      make=NOMAKE
+    fi
+  fi
+else
+  make="$MAKE"
+fi
+
+if [ -x "$make" ]; then
+  (exit 0)
+else
+  # echo "Installing without make. This may fail." >&2
+  make=NOMAKE
+fi
+
+# If there's no bash, then don't even try to clean
+if [ -x "/bin/bash" ]; then
+  (exit 0)
+else
+  clean="no"
+fi
+
+node_version=`"$node" --version 2>&1`
+ret=$?
+if [ $ret -ne 0 ]; then
+  echo "You need node to run this program." >&2
+  echo "node --version reports: $node_version" >&2
+  echo "with exit code = $ret" >&2
+  echo "Please install node before continuing." >&2
+  exit $ret
+fi
+
+t="${npm_install}"
+if [ -z "$t" ]; then
+  # switch based on node version.
+  # note that we can only use strict sh-compatible patterns here.
+  case $node_version in
+    0.[012345].* | v0.[012345].*)
+      echo "You are using an outdated and unsupported version of" >&2
+      echo "node ($node_version).  Please update node and try again." >&2
+      exit 99
+      ;;
+    v0.[678].* | 0.[678].*)
+      echo "install npm@1.1"
+      t=1.1
+      ;;
+    *)
+      echo "install npm@latest"
+      t="latest"
+      ;;
+  esac
+fi
+
+# the npmca cert
+cacert='
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+'
+
+echo "$cacert" > "$TMP/cafile.crt"
+cacert="$TMP/cafile.crt"
+
+# need to echo "" after, because Posix sed doesn't treat EOF
+# as an implied end of line.
+url=`(curl -SsL --cacert "$cacert" https://registry.npmjs.org/npm/$t; echo "") \
+     | sed -e 's/^.*tarball":"//' \
+     | sed -e 's/".*$//'`
+
+ret=$?
+if [ "x$url" = "x" ]; then
+  ret=125
+  # try without the -e arg to sed.
+  url=`(curl -SsL --cacert "$cacert" https://registry.npmjs.org/npm/$t; echo "") \
+       | sed 's/^.*tarball":"//' \
+       | sed 's/".*$//'`
+  ret=$?
+  if [ "x$url" = "x" ]; then
+    ret=125
+  fi
+fi
+if [ $ret -ne 0 ]; then
+  echo "Failed to get tarball url for npm/$t" >&2
+  exit $ret
+fi
+
+
+echo "fetching: $url" >&2
+
+cd "$TMP" \
+  && curl -SsL --cacert "$cacert" "$url" \
+     | $tar -xzf - \
+  && rm "$cacert" \
+  && cd "$TMP"/* \
+  && (req=`"$node" bin/read-package-json.js package.json engines.node`
+      if [ -d node_modules ]; then
+        "$node" node_modules/semver/bin/semver -v "$node_version" -r "$req"
+        ret=$?
+      else
+        "$node" bin/semver.js -v "$node_version" -r "$req"
+        ret=$?
+      fi
+      if [ $ret -ne 0 ]; then
+        echo "You need node $req to run this program." >&2
+        echo "node --version reports: $node_version" >&2
+        echo "Please upgrade node before continuing." >&2
+        exit $ret
+      fi) \
+  && (ver=`"$node" bin/read-package-json.js package.json version`
+      isnpm10=0
+      if [ $ret -eq 0 ]; then
+        req=`"$node" bin/read-package-json.js package.json engines.node`
+        if [ -d node_modules ]; then
+          if "$node" node_modules/semver/bin/semver -v "$ver" -r "1"
+          then
+            isnpm10=1
+          fi
+        else
+          if "$node" bin/semver -v "$ver" -r ">=1.0"; then
+            isnpm10=1
+          fi
+        fi
+      fi
+
+      ret=0
+      if [ $isnpm10 -eq 1 ] && [ -f "scripts/clean-old.sh" ]; then
+        if [ "x$skipclean" = "x" ]; then
+          (exit 0)
+        else
+          clean=no
+        fi
+        if [ "x$clean" = "xno" ] \
+            || [ "x$clean" = "xn" ]; then
+          echo "Skipping 0.x cruft clean" >&2
+          ret=0
+        elif [ "x$clean" = "xy" ] || [ "x$clean" = "xyes" ]; then
+          NODE="$node" /bin/bash "scripts/clean-old.sh" "-y"
+          ret=$?
+        else
+          NODE="$node" /bin/bash "scripts/clean-old.sh" </dev/tty
+          ret=$?
+        fi
+      fi
+
+      if [ $ret -ne 0 ]; then
+        echo "Aborted 0.x cleanup.  Exiting." >&2
+        exit $ret
+      fi) \
+  && (if [ "x$configures" = "x" ]; then
+        (exit 0)
+      else
+        echo "./configure "$configures
+        echo "$configures" > npmrc
+      fi) \
+  && (if [ "$make" = "NOMAKE" ]; then
+        (exit 0)
+      elif "$make" uninstall install; then
+        (exit 0)
+      else
+        make="NOMAKE"
+      fi
+      if [ "$make" = "NOMAKE" ]; then
+        "$node" cli.js rm npm -gf
+        "$node" cli.js install -gf
+      fi) \
+  && cd "$BACK" \
+  && rm -rf "$TMP" \
+  && echo "It worked"
+
+ret=$?
+if [ $ret -ne 0 ]; then
+  echo "It failed" >&2
+fi
+exit $ret