elm-rails 0.2.0 → 0.2.1

data/test/rails4.2/config/boot.rb

@@ -1,3 +0,0 @@
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
-
-require 'bundler/setup' # Set up gems listed in the Gemfile.

data/test/rails4.2/config/database.yml

@@ -1,25 +0,0 @@
-# SQLite version 3.x
-#   gem install sqlite3
-#
-#   Ensure the SQLite 3 gem is defined in your Gemfile
-#   gem 'sqlite3'
-#
-default: &default
-  adapter: sqlite3
-  pool: 5
-  timeout: 5000
-
-development:
-  <<: *default
-  database: db/development.sqlite3
-
-# Warning: The database defined as "test" will be erased and
-# re-generated from your development database when you run "rake".
-# Do not set this db to the same as development or production.
-test:
-  <<: *default
-  database: db/test.sqlite3
-
-production:
-  <<: *default
-  database: db/production.sqlite3

data/test/rails4.2/config/environment.rb

@@ -1,5 +0,0 @@
-# Load the Rails application.
-require File.expand_path('../application', __FILE__)
-
-# Initialize the Rails application.
-Rails.application.initialize!

data/test/rails4.2/config/environments/development.rb

@@ -1,41 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
-  # yet still be able to expire them through the digest params.
-  config.assets.digest = true
-
-  # Adds additional error checking when serving assets at runtime.
-  # Checks for improperly declared sprockets dependencies.
-  # Raises helpful error messages.
-  config.assets.raise_runtime_errors = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/test/rails4.2/config/environments/production.rb

@@ -1,79 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like
-  # NGINX, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
-  # yet still be able to expire them through the digest params.
-  config.assets.digest = true
-
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
-end

data/test/rails4.2/config/environments/test.rb

@@ -1,42 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static file server for tests with Cache-Control for performance.
-  config.serve_static_files   = true
-  config.static_cache_control = 'public, max-age=3600'
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Randomize the order test cases are executed.
-  config.active_support.test_order = :random
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/test/rails4.2/config/initializers/assets.rb

@@ -1,11 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
-
-# Add additional assets to the asset load path
-# Rails.application.config.assets.paths << Emoji.images_path
-
-# Precompile additional assets.
-# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-# Rails.application.config.assets.precompile += %w( search.js )

data/test/rails4.2/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/test/rails4.2/config/initializers/cookies_serializer.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.action_dispatch.cookies_serializer = :json

data/test/rails4.2/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]

data/test/rails4.2/config/initializers/inflections.rb

@@ -1,16 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format. Inflections
-# are locale specific, and you may define rules for as many different
-# locales as you wish. All of these examples are active by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end
-
-# These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.acronym 'RESTful'
-# end

data/test/rails4.2/config/initializers/mime_types.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf

data/test/rails4.2/config/initializers/session_store.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.session_store :cookie_store, key: '_rails4_2_session'

data/test/rails4.2/config/initializers/wrap_parameters.rb

@@ -1,14 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
-end
-
-# To enable root element in JSON for ActiveRecord objects.
-# ActiveSupport.on_load(:active_record) do
-#  self.include_root_in_json = true
-# end

data/test/rails4.2/config/locales/en.yml

@@ -1,23 +0,0 @@
-# Files in the config/locales directory are used for internationalization
-# and are automatically loaded by Rails. If you want to use locales other
-# than English, add the necessary files in this directory.
-#
-# To use the locales, use `I18n.t`:
-#
-#     I18n.t 'hello'
-#
-# In views, this is aliased to just `t`:
-#
-#     <%= t('hello') %>
-#
-# To use a different locale, set it with `I18n.locale`:
-#
-#     I18n.locale = :es
-#
-# This would use the information in config/locales/es.yml.
-#
-# To learn more, please read the Rails Internationalization guide
-# available at http://guides.rubyonrails.org/i18n.html.
-
-en:
-  hello: "Hello world"

data/test/rails4.2/config/routes.rb

@@ -1,56 +0,0 @@
-Rails.application.routes.draw do
-  # The priority is based upon order of creation: first created -> highest priority.
-  # See how all your routes lay out with "rake routes".
-
-  # You can have the root of your site routed with "root"
-  # root 'welcome#index'
-
-  # Example of regular route:
-  #   get 'products/:id' => 'catalog#view'
-
-  # Example of named route that can be invoked with purchase_url(id: product.id)
-  #   get 'products/:id/purchase' => 'catalog#purchase', as: :purchase
-
-  # Example resource route (maps HTTP verbs to controller actions automatically):
-  #   resources :products
-
-  # Example resource route with options:
-  #   resources :products do
-  #     member do
-  #       get 'short'
-  #       post 'toggle'
-  #     end
-  #
-  #     collection do
-  #       get 'sold'
-  #     end
-  #   end
-
-  # Example resource route with sub-resources:
-  #   resources :products do
-  #     resources :comments, :sales
-  #     resource :seller
-  #   end
-
-  # Example resource route with more complex sub-resources:
-  #   resources :products do
-  #     resources :comments
-  #     resources :sales do
-  #       get 'recent', on: :collection
-  #     end
-  #   end
-
-  # Example resource route with concerns:
-  #   concern :toggleable do
-  #     post 'toggle'
-  #   end
-  #   resources :posts, concerns: :toggleable
-  #   resources :photos, concerns: :toggleable
-
-  # Example resource route within a namespace:
-  #   namespace :admin do
-  #     # Directs /admin/products/* to Admin::ProductsController
-  #     # (app/controllers/admin/products_controller.rb)
-  #     resources :products
-  #   end
-end

data/test/rails4.2/config/secrets.yml

@@ -1,22 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Your secret key is used for verifying the integrity of signed cookies.
-# If you change this key, all old signed cookies will become invalid!
-
-# Make sure the secret is at least 30 characters and all random,
-# no regular words or you'll be exposed to dictionary attacks.
-# You can use `rake secret` to generate a secure secret key.
-
-# Make sure the secrets in this file are kept private
-# if you're sharing your code publicly.
-
-development:
-  secret_key_base: 9ec548f888f354573d76a82220e3b52b2783cd5cf905c3bb8140998a22216c9705d8e1de61e0da31e7bb11abf1a1d0a17b2b4b71da10d66408ce4f1fe21101fa
-
-test:
-  secret_key_base: 500d7c3e2ed1a8b3be8185f19c8f4a5472efb52218c6278b0b70b8ece23d9a8e38301b1fd0f2e8d27b63605d20904d6d98403461ef591d5879a3202d23719741
-
-# Do not keep production secrets in the repository,
-# instead read values from the environment.
-production:
-  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/test/rails4.2/db/seeds.rb

@@ -1,7 +0,0 @@
-# This file should contain all the record creation needed to seed the database with its default values.
-# The data can then be loaded with the rake db:seed (or created alongside the db with db:setup).
-#
-# Examples:
-#
-#   cities = City.create([{ name: 'Chicago' }, { name: 'Copenhagen' }])
-#   Mayor.create(name: 'Emanuel', city: cities.first)

data/test/rails4.2/elm-package.json

@@ -1,15 +0,0 @@
-{
-    "version": "1.0.0",
-    "summary": "helpful summary of your project, less than 80 characters",
-    "repository": "https://github.com/user/project.git",
-    "license": "BSD3",
-    "source-directories": [
-        "."
-    ],
-    "exposed-modules": [],
-    "dependencies": {
-        "elm-lang/core": "5.0.0 <= v < 6.0.0",
-        "elm-lang/html": "2.0.0 <= v < 3.0.0"
-    },
-    "elm-version": "0.18.0 <= v < 0.19.0"
-}

data/test/rails4.2/elm-stuff/build-artifacts/0.18.0/elm-lang/core/5.0.0/Array.elmo

@@ -1,54 +0,0 @@
-var _elm_lang$core$Array$append = _elm_lang$core$Native_Array.append;
-var _elm_lang$core$Array$length = _elm_lang$core$Native_Array.length;
-var _elm_lang$core$Array$isEmpty = function (array) {
-	return _elm_lang$core$Native_Utils.eq(
-		_elm_lang$core$Array$length(array),
-		0);
-};
-var _elm_lang$core$Array$slice = _elm_lang$core$Native_Array.slice;
-var _elm_lang$core$Array$set = _elm_lang$core$Native_Array.set;
-var _elm_lang$core$Array$get = F2(
-	function (i, array) {
-		return ((_elm_lang$core$Native_Utils.cmp(0, i) < 1) && (_elm_lang$core$Native_Utils.cmp(
-			i,
-			_elm_lang$core$Native_Array.length(array)) < 0)) ? _elm_lang$core$Maybe$Just(
-			A2(_elm_lang$core$Native_Array.get, i, array)) : _elm_lang$core$Maybe$Nothing;
-	});
-var _elm_lang$core$Array$push = _elm_lang$core$Native_Array.push;
-var _elm_lang$core$Array$empty = _elm_lang$core$Native_Array.empty;
-var _elm_lang$core$Array$filter = F2(
-	function (isOkay, arr) {
-		var update = F2(
-			function (x, xs) {
-				return isOkay(x) ? A2(_elm_lang$core$Native_Array.push, x, xs) : xs;
-			});
-		return A3(_elm_lang$core$Native_Array.foldl, update, _elm_lang$core$Native_Array.empty, arr);
-	});
-var _elm_lang$core$Array$foldr = _elm_lang$core$Native_Array.foldr;
-var _elm_lang$core$Array$foldl = _elm_lang$core$Native_Array.foldl;
-var _elm_lang$core$Array$indexedMap = _elm_lang$core$Native_Array.indexedMap;
-var _elm_lang$core$Array$map = _elm_lang$core$Native_Array.map;
-var _elm_lang$core$Array$toIndexedList = function (array) {
-	return A3(
-		_elm_lang$core$List$map2,
-		F2(
-			function (v0, v1) {
-				return {ctor: '_Tuple2', _0: v0, _1: v1};
-			}),
-		A2(
-			_elm_lang$core$List$range,
-			0,
-			_elm_lang$core$Native_Array.length(array) - 1),
-		_elm_lang$core$Native_Array.toList(array));
-};
-var _elm_lang$core$Array$toList = _elm_lang$core$Native_Array.toList;
-var _elm_lang$core$Array$fromList = _elm_lang$core$Native_Array.fromList;
-var _elm_lang$core$Array$initialize = _elm_lang$core$Native_Array.initialize;
-var _elm_lang$core$Array$repeat = F2(
-	function (n, e) {
-		return A2(
-			_elm_lang$core$Array$initialize,
-			n,
-			_elm_lang$core$Basics$always(e));
-	});
-var _elm_lang$core$Array$Array = {ctor: 'Array'};