dxruby_rp5 0.0.1

data/spec/vendor/rspec-expectations-2.14.4/features/built_in_matchers/end_with.feature

@@ -0,0 +1,48 @@
+Feature: end_with matcher
+
+  Use the `end_with` matcher to specify that a string or array ends with the
+  expected characters or elements.
+
+    ```ruby
+    "this string".should end_with "string"
+    "this string".should_not end_with "stringy"
+    [0, 1, 2].should end_with 1, 2
+    ```
+
+  Scenario: string usage
+    Given a file named "example_spec.rb" with:
+      """ruby
+      describe "this string" do
+        it { should end_with "string" }
+        it { should_not end_with "stringy" }
+
+        # deliberate failures
+        it { should_not end_with "string" }
+        it { should end_with "stringy" }
+      end
+      """
+    When I run `rspec example_spec.rb`
+    Then the output should contain all of these:
+      | 4 examples, 2 failures                          |
+      | expected "this string" not to end with "string" |
+      | expected "this string" to end with "stringy"    |
+
+  Scenario: array usage
+    Given a file named "example_spec.rb" with:
+      """ruby
+      describe [0, 1, 2, 3, 4] do
+        it { should end_with 4 }
+        it { should end_with 3, 4 }
+        it { should_not end_with 3 }
+        it { should_not end_with 0, 1, 2, 3, 4, 5 }
+
+        # deliberate failures
+        it { should_not end_with 4 }
+        it { should end_with 3 }
+      end
+      """
+    When I run `rspec example_spec.rb`
+    Then the output should contain all of these:
+      | 6 examples, 2 failures                     |
+      | expected [0, 1, 2, 3, 4] not to end with 4 |
+      | expected [0, 1, 2, 3, 4] to end with 3     |

data/spec/vendor/rspec-expectations-2.14.4/features/built_in_matchers/equality.feature

@@ -0,0 +1,139 @@
+Feature: equality matchers
+
+  Ruby exposes several different methods for handling equality:
+
+      a.equal?(b) # object identity - a and b refer to the same object
+      a.eql?(b)   # object equivalence - a and b have the same value
+      a == b      # object equivalence - a and b have the same value with type conversions
+
+  Note that these descriptions are guidelines but are not forced by the
+  language. Any object can implement any of these methods with its own
+  semantics.
+
+  rspec-expectations ships with matchers that align with each of these methods:
+
+    ```ruby
+    a.should equal(b) # passes if a.equal?(b)
+    a.should eql(b)   # passes if a.eql?(b)
+    a.should == b     # passes if a == b
+    ```
+
+  It also ships with two matchers that have more of a DSL feel to them:
+
+    ```ruby
+    a.should be(b) # passes if a.equal?(b)
+    a.should eq(b) # passes if a == b
+    ```
+
+  These are a useful pair if you wish to avoid the warning that Ruby emits on
+  `a.should == b`
+
+  Scenario: compare using eq (==)
+    Given a file named "compare_using_eq.rb" with:
+      """ruby
+      describe "a string" do
+        it "is equal to another string of the same value" do
+          "this string".should eq("this string")
+        end
+
+        it "is not equal to another string of a different value" do
+          "this string".should_not eq("a different string")
+        end
+      end
+
+      describe "an integer" do
+        it "is equal to a float of the same value" do
+          5.should eq(5.0)
+        end
+      end
+      """
+    When I run `rspec compare_using_eq.rb`
+    Then the output should contain "3 examples, 0 failures"
+
+  Scenario: compare using ==
+    Given a file named "compare_using_==.rb" with:
+      """ruby
+      describe "a string" do
+        it "is equal to another string of the same value" do
+          "this string".should == "this string"
+        end
+
+        it "is not equal to another string of a different value" do
+          "this string".should_not == "a different string"
+        end
+      end
+
+      describe "an integer" do
+        it "is equal to a float of the same value" do
+          5.should == 5.0
+        end
+      end
+      """
+    When I run `rspec compare_using_==.rb`
+    Then the output should contain "3 examples, 0 failures"
+
+  Scenario: compare using eql (eql?)
+    Given a file named "compare_using_eql.rb" with:
+      """ruby
+      describe "an integer" do
+        it "is equal to another integer of the same value" do
+          5.should eql(5)
+        end
+
+        it "is not equal to another integer of a different value" do
+          5.should_not eql(6)
+        end
+
+        it "is not equal to a float of the same value" do
+          5.should_not eql(5.0)
+        end
+
+      end
+      """
+    When I run `rspec compare_using_eql.rb`
+    Then the output should contain "3 examples, 0 failures"
+
+  Scenario: compare using equal (equal?)
+    Given a file named "compare_using_equal.rb" with:
+      """ruby
+      describe "a string" do
+        it "is equal to itself" do
+          string = "this string"
+          string.should equal(string)
+        end
+
+        it "is not equal to another string of the same value" do
+          "this string".should_not equal("this string")
+        end
+
+        it "is not equal to another string of a different value" do
+          "this string".should_not equal("a different string")
+        end
+
+      end
+      """
+    When I run `rspec compare_using_equal.rb`
+    Then the output should contain "3 examples, 0 failures"
+
+  Scenario: compare using be (equal?)
+    Given a file named "compare_using_be.rb" with:
+      """ruby
+      describe "a string" do
+        it "is equal to itself" do
+          string = "this string"
+          string.should be(string)
+        end
+
+        it "is not equal to another string of the same value" do
+          "this string".should_not be("this string")
+        end
+
+        it "is not equal to another string of a different value" do
+          "this string".should_not be("a different string")
+        end
+
+      end
+      """
+    When I run `rspec compare_using_be.rb`
+    Then the output should contain "3 examples, 0 failures"
+

data/spec/vendor/rspec-expectations-2.14.4/features/built_in_matchers/exist.feature

@@ -0,0 +1,45 @@
+Feature: exist matcher
+
+  The exist matcher is used to specify that something exists
+  (as indicated by #exist? or #exists?):
+
+    ```ruby
+    obj.should exist # passes if obj.exist? or obj.exists?
+    ```
+
+  Scenario: basic usage
+    Given a file named "exist_matcher_spec.rb" with:
+      """ruby
+      class Planet
+        attr_reader :name
+
+        def initialize(name)
+          @name = name
+        end
+
+        def inspect
+          "<Planet: #{name}>"
+        end
+
+        def exist? # also works with exists?
+          %w[Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune].include?(name)
+        end
+      end
+
+      describe "Earth" do
+        let(:earth) { Planet.new("Earth") }
+        specify { earth.should exist }
+        specify { earth.should_not exist } # deliberate failure
+      end
+
+      describe "Tatooine" do
+        let(:tatooine) { Planet.new("Tatooine") }
+        it { tatooine.should exist } # deliberate failure
+        it { tatooine.should_not exist }
+      end
+      """
+    When I run `rspec exist_matcher_spec.rb`
+    Then the output should contain all of these:
+      | 4 examples, 2 failures                |
+      | expected <Planet: Earth> not to exist |
+      | expected <Planet: Tatooine> to exist  |

data/spec/vendor/rspec-expectations-2.14.4/features/built_in_matchers/expect_change.feature

@@ -0,0 +1,59 @@
+Feature: expect change
+
+  Expect the execution of a block of code to change the state of an object.
+
+  Background:
+    Given a file named "lib/counter.rb" with:
+      """ruby
+      class Counter
+        class << self
+          def increment
+            @count ||= 0
+            @count += 1
+          end
+
+          def count
+            @count ||= 0
+          end
+        end
+      end
+      """
+
+  Scenario: expect change
+    Given a file named "spec/example_spec.rb" with:
+      """ruby
+      require "counter"
+
+      describe Counter, "#increment" do
+        it "should increment the count" do
+          expect { Counter.increment }.to change{Counter.count}.from(0).to(1)
+        end
+
+        # deliberate failure
+        it "should increment the count by 2" do
+          expect { Counter.increment }.to change{Counter.count}.by(2)
+        end
+      end
+      """
+    When I run `rspec spec/example_spec.rb`
+    Then the output should contain "1 failure"
+    Then the output should contain "should have been changed by 2, but was changed by 1"
+
+  Scenario: expect no change
+    Given a file named "spec/example_spec.rb" with:
+      """ruby
+      require "counter"
+
+      describe Counter, "#increment" do
+        it "should not increment the count by 1 (using not_to)" do
+          expect { Counter.increment }.not_to change{Counter.count}
+        end
+
+        it "should not increment the count by 1 (using to_not)" do
+          expect { Counter.increment }.to_not change{Counter.count}
+        end
+      end
+      """
+    When I run `rspec spec/example_spec.rb`
+    Then the output should contain "2 failures"
+    Then the output should contain "should not have changed, but did change from 1 to 2"

data/spec/vendor/rspec-expectations-2.14.4/features/built_in_matchers/expect_error.feature

@@ -0,0 +1,144 @@
+Feature: raise_error matcher
+
+  Use the `raise_error` matcher to specify that a block of code raises an
+  error. The most basic form passes if any error is thrown:
+
+    ```ruby
+    expect { raise StandardError }.to raise_error
+    ```
+
+  You can use `raise_exception` instead if you prefer that wording:
+
+    ```ruby
+    expect { 3 / 0 }.to raise_exception
+    ```
+
+  `raise_error` and `raise_exception` are functionally interchangeable, so use
+  the one that makes the most sense to you in any given context.
+
+  In addition to the basic form, above, there are a number of ways to specify
+  details of an error/exception:
+
+    ```ruby
+    expect { raise "oops" }.to raise_error
+    expect { raise "oops" }.to raise_error(RuntimeError)
+    expect { raise "oops" }.to raise_error("oops")
+    expect { raise "oops" }.to raise_error(/op/)
+    expect { raise "oops" }.to raise_error(RuntimeError, "oops")
+    expect { raise "oops" }.to raise_error(RuntimeError, /op/)
+    ```
+
+  Scenario: expect any error
+    Given a file named "example_spec" with:
+      """
+      describe "calling a missing method" do
+        it "raises" do
+          expect { Object.new.foo }.to raise_error
+        end
+      end
+      """
+    When I run `rspec example_spec`
+    Then the example should pass
+
+  Scenario: expect specific error
+    Given a file named "example_spec" with:
+      """
+      describe "calling a missing method" do
+        it "raises" do
+          expect { Object.new.foo }.to raise_error(NameError)
+        end
+      end
+      """
+    When I run `rspec example_spec`
+    Then the example should pass
+
+  Scenario: match message with a string
+    Given a file named "example_spec.rb" with:
+      """ruby
+      describe "matching error message with string" do
+        it "matches the error message" do
+          expect { raise StandardError, 'this message exactly'}.
+            to raise_error('this message exactly')
+        end
+      end
+      """
+    When I run `rspec example_spec.rb`
+    Then the example should pass
+
+  Scenario: match message with a regexp
+    Given a file named "example_spec.rb" with:
+      """ruby
+      describe "matching error message with regex" do
+        it "matches the error message" do
+          expect { raise StandardError, "my message" }.
+            to raise_error(/my mess/)
+        end
+      end
+      """
+    When I run `rspec example_spec.rb`
+    Then the example should pass
+
+  Scenario: match type + message with string
+    Given a file named "example_spec.rb" with:
+      """ruby
+      describe "matching error message with string" do
+        it "matches the error message" do
+          expect { raise StandardError, 'this message exactly'}.
+            to raise_error(StandardError, 'this message exactly')
+        end
+      end
+      """
+    When I run `rspec example_spec.rb`
+    Then the example should pass
+
+  Scenario: match type + message with regexp
+    Given a file named "example_spec.rb" with:
+      """ruby
+      describe "matching error message with regex" do
+        it "matches the error message" do
+          expect { raise StandardError, "my message" }.
+            to raise_error(StandardError, /my mess/)
+        end
+      end
+      """
+    When I run `rspec example_spec.rb`
+    Then the example should pass
+
+  Scenario: set expectations on error object passed to block
+    Given a file named "example_spec" with:
+      """
+      describe "#foo" do
+        it "raises NameError" do
+          expect { Object.new.foo }.to raise_error { |error|
+            error.should be_a(NameError)
+          }
+        end
+      end
+      """
+      When I run `rspec example_spec`
+      Then the example should pass
+
+  Scenario: expect no occurence of a specific error
+    Given a file named "example_spec" with:
+      """
+      describe Object, "#public_instance_methods" do
+        it "does not raise" do
+          expect { Object.public_instance_methods }.
+            not_to raise_error(NameError)
+        end
+      end
+      """
+    When I run `rspec example_spec`
+    Then the example should pass
+
+  Scenario: expect no error at all
+    Given a file named "example_spec" with:
+      """
+      describe "#to_s" do
+        it "does not raise" do
+          expect { Object.new.to_s }.not_to raise_error
+        end
+      end
+      """
+    When I run `rspec example_spec`
+    Then the example should pass

data/spec/vendor/rspec-expectations-2.14.4/features/built_in_matchers/have.feature

@@ -0,0 +1,109 @@
+Feature: have(n).items matcher
+
+  RSpec provides several matchers that make it easy to set expectations about the
+  size of a collection.  There are three basic forms:
+
+    ```ruby
+    collection.should have(x).items
+    collection.should have_at_least(x).items
+    collection.should have_at_most(x).items
+    ```
+
+  In addition, #have_exactly is provided as an alias to #have.
+
+  These work on any collection-like object--the object just needs to respond to #size
+  or #length (or both).  When the matcher is called directly on a collection object,
+  the #items call is pure syntactic sugar.  You can use anything you want here.  These
+  are equivalent:
+
+    ```ruby
+    collection.should have(x).items
+    collection.should have(x).things
+    ```
+
+  You can also use this matcher on a non-collection object that returns a collection
+  from one of its methods.  For example, Dir#entries returns an array, so you could
+  set an expectation using the following:
+
+    ```ruby
+    Dir.new("my/directory").should have(7).entries
+    ```
+
+  Scenario: have(x).items on a collection
+    Given a file named "have_items_spec.rb" with:
+      """ruby
+      describe [1, 2, 3] do
+        it { should have(3).items }
+        it { should_not have(2).items }
+        it { should_not have(4).items }
+
+        it { should have_exactly(3).items }
+        it { should_not have_exactly(2).items }
+        it { should_not have_exactly(4).items }
+
+        it { should have_at_least(2).items }
+        it { should have_at_most(4).items }
+
+        # deliberate failures
+        it { should_not have(3).items }
+        it { should have(2).items }
+        it { should have(4).items }
+
+        it { should_not have_exactly(3).items }
+        it { should have_exactly(2).items }
+        it { should have_exactly(4).items }
+
+        it { should have_at_least(4).items }
+        it { should have_at_most(2).items }
+      end
+      """
+     When I run `rspec have_items_spec.rb`
+     Then the output should contain "16 examples, 8 failures"
+      And the output should contain "expected target not to have 3 items, got 3"
+      And the output should contain "expected 2 items, got 3"
+      And the output should contain "expected 4 items, got 3"
+      And the output should contain "expected at least 4 items, got 3"
+      And the output should contain "expected at most 2 items, got 3"
+
+  Scenario: have(x).words on a String when String#words is defined
+    Given a file named "have_words_spec.rb" with:
+      """ruby
+      class String
+        def words
+          split(' ')
+        end
+      end
+
+      describe "a sentence with some words" do
+        it { should have(5).words }
+        it { should_not have(4).words }
+        it { should_not have(6).words }
+
+        it { should have_exactly(5).words }
+        it { should_not have_exactly(4).words }
+        it { should_not have_exactly(6).words }
+
+        it { should have_at_least(4).words }
+        it { should have_at_most(6).words }
+
+        # deliberate failures
+        it { should_not have(5).words }
+        it { should have(4).words }
+        it { should have(6).words }
+
+        it { should_not have_exactly(5).words }
+        it { should have_exactly(4).words }
+        it { should have_exactly(6).words }
+
+        it { should have_at_least(6).words }
+        it { should have_at_most(4).words }
+      end
+      """
+     When I run `rspec have_words_spec.rb`
+     Then the output should contain "16 examples, 8 failures"
+      And the output should contain "expected target not to have 5 words, got 5"
+      And the output should contain "expected 4 words, got 5"
+      And the output should contain "expected 6 words, got 5"
+      And the output should contain "expected at least 6 words, got 5"
+      And the output should contain "expected at most 4 words, got 5"
+