docspring 3.0.0 → 3.1.0

data/vendor/bundle/ruby/3.3.0/gems/rdoc-6.12.0/RI.md

@@ -0,0 +1,842 @@
+# `ri`: Ruby Information
+
+`ri` (<b>r</b>uby <b>i</b>nformation) is the Ruby command-line utility
+that gives fast and easy on-line access to Ruby documentation.
+
+`ri` can show documentation for Ruby itself and for its installed gems:
+
+- A **class** or **module**:
+  text associated with the class or module definition
+  in a source file (`.rb` or `.c`).
+- One or more **methods**:
+  text associated with method definitions
+  in source files (`.rb` and `.c`).
+- A **page**:
+  text from a stand-alone documentation file
+  (`.rdoc` or  `.md`, or sometimes other).
+
+Examples (output omitted):
+
+```sh
+$ ri Hash             # Document for class Hash.
+$ ri Array#sort       # Document for instance method sort in class Array.
+$ ri read             # Documents for methods ::read and #read in all classes and modules.
+$ ri ruby:dig_methods # Document for page dig_methods.
+```
+
+`ri` can also show lists of:
+
+- **classes** and **modules**:
+  full or partial list.
+- **pages**:
+  for Ruby or for an installed gem.
+
+Examples (output omitted):
+
+```sh
+$ ri --list # List of classes and modules.
+$ ri ruby:  # List of Ruby pages.
+```
+
+## Why `ri`?
+
+Using `ri` may have advantages over using
+the [Ruby online documentation](https://docs.ruby-lang.org/en/master):
+
+- The `ri` documentation is always available, even when you do not have internet access
+  (think: airplane mode).
+- If you are working in a terminal window, typing `ri _whatever_` (or just `ri`)
+  may be faster than navigating to a browser window and searching for documentation.
+- If you are working in an
+  [irb \(interactive Ruby\)](https://docs.ruby-lang.org/en/master/IRB.html)
+  session, you _already_ have immediate access to `ri`:
+  just type `'show_doc'`.
+
+## Modes
+
+There are two `ri` modes:
+
+- <i>Static mode</i>:
+  In general, `ri` responds in its static mode
+  if a _name_ is given;
+  it shows results and exits (as in the examples above).
+  See [Static Mode][1].
+- <i>Interactive mode</i>:
+  In general, `ri` enters its interactive mode
+  if no _name_ is given;
+  in interactive mode, `ri` shows results and waits for another command:
+
+    ```sh
+    $ ri
+    Enter the method name you want to look up.
+    You can use tab to autocomplete.
+    Enter a blank line to exit.
+    >>
+    ```
+
+    See [Interactive Mode][2].
+
+## Names
+
+In both modes, static and interactive,
+`ri` responds to an input _name_ that specifies what is to be displayed:
+a document, multiple documents, or other information:
+
+- Static mode (in the shell): type `'ri _name_'`;
+  examples (output omitted):
+
+    ```sh
+    $ ri File
+    $ ri IO#readlines
+    $ ri ruby:
+    ```
+
+- Interactive mode (already in `ri`): just type the _name_;
+  examples (output omitted):
+
+    ```sh
+    $ ri
+    Enter the method name you want to look up.
+    You can use tab to autocomplete.
+    Enter a blank line to exit.
+    >> File
+    >> IO#readlines
+    >> ruby:
+    ```
+
+### Names for Class and Module Documents
+
+These example `ri` commands cite names for class and module documents
+(see [details and examples][3]):
+
+| Command                      | Shows                                                      |
+|------------------------------|------------------------------------------------------------|
+| ri File                      | Document for Ruby class File.                              |
+| ri File::Stat                | Document for Ruby nested class File::Stat.                 |
+| ri Enumerable                | Document for Ruby module Enumerable.                       |
+| ri Arr                       | Document for Ruby class Array (unique initial characters). |
+| ri Nokogiri::HTML4::Document | Document for gem class Nokogiri::HTML4::Document.          |
+| ri Nokogiri                  | Document for gem module Nokogiri.                          |
+<br>
+
+If [option \\--all][4]
+is in effect, documents for the methods in the named class or module
+are included in the display.
+
+### Names for Method Documents
+
+These example `ri` commands cite names for method documents
+(see [details and examples][5]):
+
+| Command                              | Shows                                                                            |
+|--------------------------------------|----------------------------------------------------------------------------------|
+| ri IO::readlines                     | Document for Ruby class method IO::readlines.                                    |
+| ri IO#readlines                      | Document for Ruby instance method IO::readlines.                                 |
+| ri IO.readlines                      | Documents for Ruby instance method IO::readlines and class method IO::readlines. |
+| ri ::readlines                       | Documents for all class methods ::readlines.                                     |
+| ri #readlines                        | Documents for all instance methods #readlines.                                   |
+| ri .readlines, ri readlines          | Documents for class methods ::readlines and instance methods #readlines.         |
+| ri Nokogiri::HTML4::Document::parse  | Document for gem class method Nokogiri::HTML4::Document::parse.                  |
+| ri Nokogiri::HTML4::Document#fragment | Document for gem instance method Nokogiri::HTML4::Document#fragment.            |
+<br>
+
+### Names for Page Documents
+
+These example `ri` commands cite names for page documents
+(see [details and examples][6]):
+
+| Command                        | Shows                                            |
+|--------------------------------|--------------------------------------------------|
+| ri ruby:syntax/assignment.rdoc | Document for Ruby page assignment.               |
+| ri ruby:syntax/assignment      | Same document, if no other syntax/assignment.*.  |
+| ri ruby:assignment             | Same document, if no other */assignment.*.       |
+| ri nokogiri:README.md          | Document for page README.md.                     |
+<br>
+
+### Names for Lists
+
+These example `ri` commands cite names for lists
+(see [details and examples][7]):
+
+| Command       | Shows                   |
+|---------------|-------------------------|
+| ri ruby:      | List of Ruby pages.     |
+| ri nokogiri:  | List of Nokogiri pages. |
+<br>
+
+There are more lists available;
+see [option \\--list][8].
+
+## Pro Tips
+
+### `ri` at the Ready
+
+If you are a frequent `ri` user,
+you can save time by keeping open a dedicated command window
+with either of:
+
+- A running [interactive ri][2] session.
+- A running [irb session][9];
+  type `'show_doc'` to enter `ri`, newline to exit.
+
+When you switch to that window, `ri` is ready to respond quickly,
+without the performance overhead of re-reading `ri` sources.
+
+### Output Filters
+
+The `pager` value actually need not be simply the path to an executable;
+it's actually a full-fledged command line,
+and so may include not only the executable path,
+but also whatever options and arguments that executable accepts.
+
+You can, for example, set the pager value to `'grep . | less'`,
+which will exclude blank lines (thus saving screen space)
+before piping the result to `less`;
+example (output omitted):
+
+```sh
+$ RI_PAGER="grep . | less" ri Array
+```
+
+See the documentation for your chosen pager programs
+(e.g, type `'grep --help'`, `'less --help'`).
+
+### Links  in `ri` Output
+
+#### Implicit Link
+
+When you see:
+
+- `'IO::readlines'`, `'IO#readlines'`, `'IO.readlines'`:
+  use that same text as the _name_ in an `ri` command.
+
+    Examples (output omitted):
+
+    ```sh
+    $ ri IO::readlines
+    $ ri IO#readlines
+    $ ri IO.readlines
+    ```
+
+- `'#read'`, `'::read'`, `'.read'`:
+  you're likely already in the `ri` document for a class or module,
+  or for a method in a class or module;
+  use that same text with the name of the class or module (such as `'File'`)
+  as the _name_ in an `ri` command.
+
+    Examples (output omitted):
+
+    ```sh
+    $ ri File::read
+    $ ri File#read
+    $ ri File.read
+    ```
+
+#### Explicit Link
+
+When you see:
+
+- `'{Dig Methods}[rdoc-ref:doc/dig_methods.rdoc]'`:
+   use the trailing part of the `'[rdoc-ref:doc/'` in an `ri` command
+   for a Ruby document.
+
+    Example (output omitted):
+
+    ```sh
+    $ ri ruby:dig_methods.rdoc
+    ```
+
+- `'{Table (information)}[https://en.wikipedia.org/wiki/Table_(information)]'`:
+  go to the given URL in your browser.
+
+## About the Examples
+
+- `ri` output can be large;
+  to save space, an example may pipe it to one of these:
+
+    - [head](https://www.man7.org/linux/man-pages/man1/head.1.html): leading lines only.
+    - [tail](https://www.man7.org/linux/man-pages/man1/tail.1.html): trailing lines only.
+    - [wc -l](https://www.man7.org/linux/man-pages/man1/wc.1.html): line count only.
+    - [grep](https://www.man7.org/linux/man-pages/man1/grep.1.html): selected lines only.
+
+- An example that involves a gem assumes that gems `nokogiri` and `minitest` are installed.
+
+## `ri` Documents
+
+This section outlines what you can expect to find
+in the `ri` document for a class, module, method, or page.
+
+See also:
+
+- [Pager][10].
+- [Links in ri Output][11].
+
+### Class and Module Documents
+
+The document for a class or module shows:
+
+- The class or module name, along with its parent class if any.
+- Where it's defined (Ruby core or gem).
+- When each exists:
+
+    - The names of its included modules.
+    - The text of its embedded documentation.
+    - Its constants.
+    - Its class methods.
+    - Its instance methods.
+
+Examples:
+
+- Ruby class `Array`:
+
+    ```sh
+    $ ri Array | head
+    = Array < Object
+
+    ------------------------------------------------------------------------
+    = Includes:
+      Enumerable (from ruby core)
+
+    (from ruby core)
+    ------------------------------------------------------------------------
+    An Array is an ordered, integer-indexed collection of objects, called
+    elements.  Any object may be an Array element.
+    ```
+
+- Gem module `Nokogiri`:
+
+    ```sh
+    $ ri Nokogiri | head
+    = Nokogiri
+
+    (from gem nokogiri-1.16.2-x86_64-linux)
+    ------------------------------------------------------------------------
+
+    Nokogiri parses and searches XML/HTML very quickly, and also has
+    correctly implemented CSS3 selector support as well as XPath 1.0
+    support.
+
+    Parsing a document returns either a Nokogiri::XML::Document, or a
+    ```
+
+The document typically includes certain headings,
+which may be useful for searching:
+
+```sh
+$ ri IO | grep "^= "
+= IO < Object
+= Includes:
+= Constants:
+= Class methods:
+= Instance methods:
+```
+
+### Method Documents
+
+The document for a method includes:
+
+- The source of the method: `'(from ruby core)'` or `'(from gem _gem_)'`.
+- The calling sequence(s) for the method.
+- The text of its embedded documentation (if it exists).
+
+Examples:
+
+```sh
+$ ri IO#read | head
+= IO#read
+
+(from ruby core)
+------------------------------------------------------------------------
+ios.read([length [, outbuf]])    -> string, outbuf, or nil
+
+------------------------------------------------------------------------
+
+Reads length bytes from the I/O stream.
+```
+
+```sh
+$ ri Nokogiri::parse | head
+= Nokogiri::parse
+
+(from gem nokogiri-1.16.2-x86_64-linux)
+------------------------------------------------------------------------
+  parse(string, url = nil, encoding = nil, options = nil) { |doc| ... }
+
+------------------------------------------------------------------------
+
+Parse an HTML or XML document.  string contains the document.
+```
+
+The output for a _name_ that cites methods includes the document
+for each found implementation;
+the number of such implementations depends on the _name_:
+
+- Within a class:
+
+    Each of these commands shows documents
+    for methods in Ruby class `IO` (output omitted):
+
+    ```sh
+    $ ri IO::readlines # Class method ::readlines.
+    $ ri IO#readlines  # Instance method #readlines.
+    $ ri IO.readlines  # Both of above.
+    ```
+
+- In all classes:
+
+    Each of these commands shows documents
+    for methods in all classes (output omitted):
+
+    ```sh
+    $ ri ::readlines   # Class method ::readlines.
+    $ ri \#readlines   # Instance method #readlines.
+    $ ri .readlines    # Both of above.
+    ```
+
+    For these all-classes commands,
+    the output is organized into sections,
+    one for each found method (output filtered to show sections):
+
+    ```sh
+    $ ri ::readlines | grep "= Implementation"
+    === Implementation from CSV
+    === Implementation from IO
+    ```
+
+    ```sh
+    $ ri \#readlines | grep "= Implementation"
+    === Implementation from ARGF
+    === Implementation from CSV
+    === Implementation from IO
+    === Implementation from Kernel
+    === Implementation from Buffering
+    === Implementation from Pathname
+    === Implementation from StringIO
+    === Implementation from GzipReader
+    ```
+
+    ```sh
+    $ ri .readlines | grep "= Implementation"
+    === Implementation from ARGF
+    === Implementation from CSV
+    === Implementation from CSV
+    === Implementation from IO
+    === Implementation from IO
+    === Implementation from Kernel
+    === Implementation from Buffering
+    === Implementation from Pathname
+    === Implementation from StringIO
+    === Implementation from GzipReader
+    ```
+
+### Page Documents
+
+The document for a Ruby page is the text from the `.rdoc` or `.md` source
+for that page:
+
+```sh
+$ ri ruby:dig_methods | head
+= Dig Methods
+
+Ruby's dig methods are useful for accessing nested data structures.
+
+Consider this data:
+  item = {
+    id: "0001",
+    type: "donut",
+    name: "Cake",
+    ppu: 0.55,
+```
+
+The document for a gem page is whatever the gem has generated
+for the page:
+
+```sh
+$ ri minitest:README | head
+= minitest/{test,spec,mock,benchmark}
+
+home:
+  https://github.com/minitest/minitest
+
+bugs:
+  https://github.com/minitest/minitest/issues
+
+rdoc:
+  https://docs.seattlerb.org/minitest
+```
+
+## `ri` Lists
+
+The list of Ruby pages is available via _name_ `'ruby:'`:
+
+```sh
+$ ri ruby: | head
+= Pages in ruby core
+
+CONTRIBUTING.md
+COPYING
+COPYING.ja
+LEGAL
+NEWS-1.8.7
+NEWS-1.9.1
+NEWS-1.9.2
+NEWS-1.9.3
+```
+
+```sh
+$ ri ruby: | tail
+syntax/control_expressions.rdoc
+syntax/exceptions.rdoc
+syntax/literals.rdoc
+syntax/methods.rdoc
+syntax/miscellaneous.rdoc
+syntax/modules_and_classes.rdoc
+syntax/pattern_matching.rdoc
+syntax/precedence.rdoc
+syntax/refinements.rdoc
+win32/README.win32
+```
+
+The list of gem pages is available via _name_ `'_gem_name_'`:
+
+```sh
+$ ri nokogiri: | head
+= Pages in gem nokogiri-1.16.2-x86_64-linux
+
+README.md
+lib/nokogiri/css/tokenizer.rex
+```
+
+See also:
+
+- [Option \\--list][8]:
+  lists classes and modules.
+- [Option \\--list-doc-dirs][12]:
+  lists `ri` source directories.
+
+## `ri` Information
+
+With certain options,
+an `ri` command may display information other than documents or lists:
+
+- [Option \\--help or -h][13]:
+  Shows `ri` help text.
+- [option \\--version or -v][14]:
+  Shows `ri` version.
+- [Option \\--dump=FILEPATH][15]:
+  Shows dump of `ri` cache file at the given filepath.
+
+## Static Mode
+
+In static mode, `ri` shows a response and exits.
+
+In general, `ri` responds in static mode
+if the command gives a _name_:
+
+```sh
+$ ri Array | head
+= Array < Object
+
+------------------------------------------------------------------------
+= Includes:
+Enumerable (from ruby core)
+
+(from ruby core)
+------------------------------------------------------------------------
+An Array is an ordered, integer-indexed collection of objects, called
+elements.  Any object may be an Array element.
+```
+
+`ri` also responds in static mode when certain options are given,
+even when no _name_ is given;
+see [ri Information][16].
+
+## Interactive Mode
+
+In general, `ri` responds to a command in interactive mode
+if the command has no arguments:
+
+```sh
+$ ri
+Enter the method name you want to look up.
+You can use tab to autocomplete.
+Enter a blank line to exit.
+>>
+
+```
+
+A command in interactive mode are similar to one in static mode,
+except that it:
+
+- Omits command word `ri`; you just type the _name_.
+- Omits options; in interactive mode the only options in effect
+  are those taken from environment variable `RI`.
+  See [Options][17].
+- Supports tab auto-completion for the name of a class, module, or method;
+  when, for example, you type `"Arr\t"` (here `"\t` represents the tab character),
+  `ri` "completes" the text as `'Array '`.
+
+See also [ri at the Ready][18].
+
+## Pager
+
+Because `ri` output is often large,
+`ri` by default pipes it to a _pager_,
+which is the program whose name is the first-found among:
+
+- The value of `ENV['RI_PAGER']`.
+- The value of `ENV['PAGER']`.
+- `'pager'`.
+- `'less'`.
+- `'more'`.
+
+If none is found, the output goes directly to `$stdout`, with no pager.
+
+If you set environment variable `RI_PAGER` or `PAGER`,
+its value should be the name of an executable program
+that will accept the `ri` output (such as `'pager'`, `'less'`, or `'more'`).
+
+See also [Output Filters][19].
+
+## Options
+
+Options may be given on the `ri` command line;
+those should be whitespace-separated, and must precede the given _name_, if any.
+
+Options may also be specified in environment variable `RI`;
+those should also be whitespace-separated.
+
+An option specified in environment variable `RI`
+may be overridden by an option on the `ri` command line:
+
+```sh
+$ RI="--all" ri Array | wc -l
+4224
+$ RI="--all" ri --no-all Array | wc -l
+390
+```
+
+### Source Directories Options
+
+#### Options `--doc-dir=DIRPATH`, `-d DIRPATH`
+
+Option `--doc-dir=DIRPATH` (aliased as `-d`) adds the given directory path
+to the beginning of the array of `ri` source directory paths:
+
+```sh
+$ ri --doc-dir=/tmp --list-doc-dirs | head -1
+/tmp
+```
+
+#### Options `--gems`, `--no-gems`
+
+Option `--gems` (the default) specifies that documents from installed gems
+may be included;
+option `--no-gems` may be used to exclude them:
+
+```sh
+$ ri --list | wc -l
+1417
+$ ri --list --no-gems| wc -l
+1262
+```
+
+#### Options `--home`, `--no-home`
+
+Option `--home` (the default) specifies that `ri` is to include source directory
+in `~/.rdoc` if it exists;
+option `--no-home` may be used to exclude them.
+
+#### Options `--list-doc-dirs`, `--no-list-doc-dirs`
+
+Option `--list-doc-dirs` specifies that a list of the `ri` source directories
+is to be displayed;
+default is `--no-list-doc-dirs`.
+
+#### Option `--no-standard`
+
+Option `--no-standard` specifies that documents from the standard libraries
+are not to be included;
+default is to include documents from the standard libraries.
+
+#### Options `--site`, `--no-site`
+
+Option `--site` (the default) specifies that documents from the site libraries
+may be included;
+option `--no-site` may be used to exclude them.
+
+#### Options `--system`, `--no-system`
+
+Option `--system` (the default) specifies that documents from the system libraries
+may be included;
+option `--no-system` may be used to exclude them.
+
+### Mode Options
+
+#### Options `--interactive`, `-i`, `--no-interactive`
+
+Option `--interactive` (aliased as `-i`)
+specifies that `ri` is to enter interactive mode (ignoring the _name_ if given);
+the option is the default when no _name_ is given;
+option `--no-interactive` (the default)
+specifies that `ri` is not to enter interactive mode,
+regardless of whether _name_ is given.
+
+### Information Options
+
+#### Options `--help`, `-h`
+
+Option `--help` (aliased as `-h`) specifies that `ri` is to show
+its help text and exit.
+
+#### Options `--version`, `-v`
+
+Option `--version` (aliased as `-v`) specifies that `ri` is to show its version and exit.
+
+### Debugging Options
+
+#### Options `--dump=FILEPATH`, `--no-dump`
+
+Option `--dump=FILEPATH` specifies that `ri` is to dump the content
+of the `.ri` file at the given file path;
+option`--no-dump` (the default) specifies that `ri` is not to dump content.
+
+The file path may point to any `.ri` file,
+but typically would point to one named `cache.ri`:
+
+```sh
+$ ri --dump=/usr/share/ri/3.0.0/system/cache.ri | wc -l
+14487
+$ ri --dump=/usr/share/ri/3.0.0/system/cache.ri | head
+{:ancestors=>
+  {"Array"=>["Enumerable", "Object"],
+   "RubyVM"=>["Object"],
+   "RubyVM::AbstractSyntaxTree::Node"=>["Object"],
+   "Object"=>["BasicObject", "Kernel"],
+   "Integer"=>["Numeric"],
+   "Module"=>["Object"],
+   "Class"=>["Module"],
+   "Complex"=>["Numeric"],
+   "NilClass"=>["Object"],
+```
+
+#### Options `--profile`, `--no-profile`
+
+Option `--profile` specifies that the program is to be run with the Ruby profiler;
+option `no-profile` (the default) specifies that the program is not to be run
+with the Ruby profiler.
+
+### Output Options
+
+#### Options `--format=FORMAT`, `-f FORMAT`
+
+Option `--format=FORMAT` (aliased as `-f`) specifies the formatter for the output,
+which must be `ansi`, `bs`, `markdown`, or `rdoc`;
+the default is `bs` for paged output, `ansi` otherwise.
+
+#### Options `--pager`, `--no-pager`
+
+Option `--pager` (the default) specifies that the output is to be piped
+to a pager;
+option `--no-pager` specifies that the output is not to be piped.
+
+#### Options `--width=NUMBER`, `-w NUMBER`
+
+Option `--width` (aliased as `-w`) specifies that the lengths of the displayed lines
+should be restricted to the given _NUMBER_ of characters;
+this is to be accomplished by line-wrapping, not truncation.
+The default width is `80`:
+
+```sh
+$ ri --width=40 Array | head
+= Array < Object
+
+----------------------------------------
+= Includes:
+Enumerable (from ruby core)
+
+(from ruby core)
+----------------------------------------
+An Array is an ordered, integer-indexed
+collection of objects, called
+```
+
+
+### List Options
+
+#### Options `--list`, `-l`, `--no-list`
+
+Option `--list` (aliased as `-l`) specifies that all class and module names
+whose initial characters match the given _name_ are to be displayed:
+whose initial characters match the given _name_ are to be displayed:
+
+```sh
+$ ri --list Ar | head
+ArgumentError
+Array
+```
+
+If no _name_ is given, all class and module names are displayed.
+
+Option `--no-list` (the default) specifies that a list of class and module names
+is not to be displayed.
+
+### Methods Options (for Class or Module)
+
+#### Options `--all`, `-a`, `--no-all`
+
+Option `--all` (aliased as `-a`) specifies that when _name_ identifies a class or module,
+the documents for all its methods are included;
+option `--no-all` (the default) specifies that the method documents are not to be included:
+
+```shell
+$ ri Array | wc -l
+390
+$ ri --all Array | wc -l
+4224
+```
+
+### Server Option
+
+#### Option `--server=NUMBER`
+
+Option `--server` specifies that the \RDoc server is to be run on the port
+given as _NUMBER_;
+the default port is `8214`.
+
+## Generating `ri` Source Files
+
+`ri` by default reads data from directories installed by Ruby and gems.
+
+You can create your own `ri` source files.
+This command creates `ri` source files in local directory `my_ri`,
+from Ruby source files in local directory `my_sources`:
+
+```sh
+$ rdoc --op my_ri --format=ri my_sources
+```
+
+Those files may then be considered for any `ri` command
+by specifying option `--doc-dir=my_ri`;
+see [option \\--doc-dir][20].
+
+[1]: rdoc-ref:RI.md@Static+Mode
+[2]: rdoc-ref:RI.md@Interactive+Mode
+[3]: rdoc-ref:RI.md@Class+and+Module+Documents
+[4]: rdoc-ref:RI.md@Options+--all-2C+-a-2C+--no-all
+[5]: rdoc-ref:RI.md@Method+Documents
+[6]: rdoc-ref:RI.md@Page+Documents
+[7]: rdoc-ref:RI.md@ri+Lists
+[8]: rdoc-ref:RI.md@Options+--list-2C+-l-2C+--no-list
+[9]: https://docs.ruby-lang.org/en/master/IRB.html
+[10]: rdoc-ref:RI.md@Pager
+[11]: rdoc-ref:RI.md@Links+in+ri+Output
+[12]: rdoc-ref:RI.md@Options+--list-doc-dirs-2C+--no-list-doc-dirs
+[13]: rdoc-ref:RI.md@Options+--help-2C+-h
+[14]: rdoc-ref:RI.md@Options+--version-2C+-v
+[15]: rdoc-ref:RI.md@Options+--dump-3DFILEPATH-2C+--no-dump
+[16]: rdoc-ref:RI.md@ri+Information
+[17]: rdoc-ref:RI.md@Options
+[18]: rdoc-ref:RI.md@ri+at+the+Ready
+[19]: rdoc-ref:RI.md@Output+Filters
+[20]: rdoc-ref:RI.md@Options+--doc-dir-3DDIRPATH-2C+-d+DIRPATH