cybersource_rest_client 0.0.26 → 0.0.31

data/lib/cybersource_rest_client/models/tss_v2_transactions_post201_response__embedded_payment_information_card.rb

@@ -20,7 +20,7 @@ module CyberSource
     # Bank Identification Number (BIN). This is the initial four to six numbers on a credit card account number. 
     attr_accessor :prefix
 
-    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
+    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1,4] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. [^4]: For this card type, you must include the `paymentInformation.card.type` in your request for any payer authentication services.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
     attr_accessor :type
 
     # Attribute mapping from ruby-style variable name to JSON key.
@@ -66,27 +66,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@prefix.nil? && @prefix.to_s.length > 6
-        invalid_properties.push('invalid value for "prefix", the character length must be smaller than or equal to 6.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@prefix.nil? && @prefix.to_s.length > 6
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] prefix Value to be assigned
     def prefix=(prefix)
-      if !prefix.nil? && prefix.to_s.length > 6
-        fail ArgumentError, 'invalid value for "prefix", the character length must be smaller than or equal to 6.'
-      end
-
       @prefix = prefix
     end
 

data/lib/cybersource_rest_client/models/tss_v2_transactions_post201_response__embedded_point_of_sale_information.rb

@@ -74,42 +74,24 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@terminal_id.nil? && @terminal_id.to_s.length > 8
-        invalid_properties.push('invalid value for "terminal_id", the character length must be smaller than or equal to 8.')
-      end
-
-      if !@terminal_serial_number.nil? && @terminal_serial_number.to_s.length > 32
-        invalid_properties.push('invalid value for "terminal_serial_number", the character length must be smaller than or equal to 32.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@terminal_id.nil? && @terminal_id.to_s.length > 8
-      return false if !@terminal_serial_number.nil? && @terminal_serial_number.to_s.length > 32
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] terminal_id Value to be assigned
     def terminal_id=(terminal_id)
-      if !terminal_id.nil? && terminal_id.to_s.length > 8
-        fail ArgumentError, 'invalid value for "terminal_id", the character length must be smaller than or equal to 8.'
-      end
-
       @terminal_id = terminal_id
     end
 
     # Custom attribute writer method with validation
     # @param [Object] terminal_serial_number Value to be assigned
     def terminal_serial_number=(terminal_serial_number)
-      if !terminal_serial_number.nil? && terminal_serial_number.to_s.length > 32
-        fail ArgumentError, 'invalid value for "terminal_serial_number", the character length must be smaller than or equal to 32.'
-      end
-
       @terminal_serial_number = terminal_serial_number
     end
 

data/lib/cybersource_rest_client/models/tss_v2_transactions_post201_response__embedded_point_of_sale_information_partner.rb

@@ -48,27 +48,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@original_transaction_id.nil? && @original_transaction_id.to_s.length > 32
-        invalid_properties.push('invalid value for "original_transaction_id", the character length must be smaller than or equal to 32.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@original_transaction_id.nil? && @original_transaction_id.to_s.length > 32
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] original_transaction_id Value to be assigned
     def original_transaction_id=(original_transaction_id)
-      if !original_transaction_id.nil? && original_transaction_id.to_s.length > 32
-        fail ArgumentError, 'invalid value for "original_transaction_id", the character length must be smaller than or equal to 32.'
-      end
-
       @original_transaction_id = original_transaction_id
     end
 

data/lib/cybersource_rest_client/models/tss_v2_transactions_post201_response__embedded_processing_information.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class TssV2TransactionsPost201ResponseEmbeddedProcessingInformation
-    # Type of digital payment solution for the transaction. Possible Values:   - `visacheckout`: Visa Checkout. This value is required for Visa Checkout transactions. For details, see `payment_solution` field description in [Visa Checkout Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/VCO_SCMP_API/html/)  - `001`: Apple Pay.  - `004`: Cybersource In-App Solution.  - `005`: Masterpass. This value is required for Masterpass transactions on OmniPay Direct. For details, see \"Masterpass\" in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  - `006`: Android Pay.  - `007`: Chase Pay.  - `008`: Samsung Pay.  - `012`: Google Pay. 
+    # Type of digital payment solution for the transaction. Possible Values:   - `visacheckout`: Visa Checkout. This value is required for Visa Checkout transactions. For details, see `payment_solution` field description in [Visa Checkout Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/VCO_SCMP_API/html/)  - `001`: Apple Pay.  - `004`: Cybersource In-App Solution.  - `005`: Masterpass. This value is required for Masterpass transactions on OmniPay Direct. For details, see \"Masterpass\" in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  - `006`: Android Pay.  - `007`: Chase Pay.  - `008`: Samsung Pay.  - `012`: Google Pay.  - `014`: Mastercard credential on file (COF) payment network token. Returned in authorizations that use a payment network token associated with a TMS token.  - `015`: Visa credential on file (COF) payment network token. Returned in authorizations that use a payment network token associated with a TMS token. 
     attr_accessor :payment_solution
 
     # Payouts transaction type. Required for OCT transactions. This field is a pass-through, which means that CyberSource does not verify the value or modify it in any way before sending it to the processor. **Note** When the request includes this field, this value overrides the information in your CyberSource account.  For valid values, see the `invoiceHeader_businessApplicationID` field description in [Payouts Using the Simple Order API.](http://apps.cybersource.com/library/documentation/dev_guides/payouts_SO/Payouts_SO_API.pdf) 
@@ -66,42 +66,24 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@payment_solution.nil? && @payment_solution.to_s.length > 12
-        invalid_properties.push('invalid value for "payment_solution", the character length must be smaller than or equal to 12.')
-      end
-
-      if !@commerce_indicator.nil? && @commerce_indicator.to_s.length > 20
-        invalid_properties.push('invalid value for "commerce_indicator", the character length must be smaller than or equal to 20.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@payment_solution.nil? && @payment_solution.to_s.length > 12
-      return false if !@commerce_indicator.nil? && @commerce_indicator.to_s.length > 20
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] payment_solution Value to be assigned
     def payment_solution=(payment_solution)
-      if !payment_solution.nil? && payment_solution.to_s.length > 12
-        fail ArgumentError, 'invalid value for "payment_solution", the character length must be smaller than or equal to 12.'
-      end
-
       @payment_solution = payment_solution
     end
 
     # Custom attribute writer method with validation
     # @param [Object] commerce_indicator Value to be assigned
     def commerce_indicator=(commerce_indicator)
-      if !commerce_indicator.nil? && commerce_indicator.to_s.length > 20
-        fail ArgumentError, 'invalid value for "commerce_indicator", the character length must be smaller than or equal to 20.'
-      end
-
       @commerce_indicator = commerce_indicator
     end
 

data/lib/cybersource_rest_client/models/tss_v2_transactions_post201_response__embedded_risk_information_providers_fingerprint.rb

@@ -66,57 +66,30 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@true_ipaddress.nil? && @true_ipaddress.to_s.length > 255
-        invalid_properties.push('invalid value for "true_ipaddress", the character length must be smaller than or equal to 255.')
-      end
-
-      if !@hash.nil? && @hash.to_s.length > 255
-        invalid_properties.push('invalid value for "hash", the character length must be smaller than or equal to 255.')
-      end
-
-      if !@smart_id.nil? && @smart_id.to_s.length > 255
-        invalid_properties.push('invalid value for "smart_id", the character length must be smaller than or equal to 255.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@true_ipaddress.nil? && @true_ipaddress.to_s.length > 255
-      return false if !@hash.nil? && @hash.to_s.length > 255
-      return false if !@smart_id.nil? && @smart_id.to_s.length > 255
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] true_ipaddress Value to be assigned
     def true_ipaddress=(true_ipaddress)
-      if !true_ipaddress.nil? && true_ipaddress.to_s.length > 255
-        fail ArgumentError, 'invalid value for "true_ipaddress", the character length must be smaller than or equal to 255.'
-      end
-
       @true_ipaddress = true_ipaddress
     end
 
     # Custom attribute writer method with validation
     # @param [Object] hash Value to be assigned
     def hash=(hash)
-      if !hash.nil? && hash.to_s.length > 255
-        fail ArgumentError, 'invalid value for "hash", the character length must be smaller than or equal to 255.'
-      end
-
       @hash = hash
     end
 
     # Custom attribute writer method with validation
     # @param [Object] smart_id Value to be assigned
     def smart_id=(smart_id)
-      if !smart_id.nil? && smart_id.to_s.length > 255
-        fail ArgumentError, 'invalid value for "smart_id", the character length must be smaller than or equal to 255.'
-      end
-
       @smart_id = smart_id
     end
 

data/lib/cybersource_rest_client/models/tss_v2_transactions_post201_response__embedded_transaction_summaries.rb

@@ -189,27 +189,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@id.nil? && @id.to_s.length > 26
-        invalid_properties.push('invalid value for "id", the character length must be smaller than or equal to 26.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@id.nil? && @id.to_s.length > 26
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] id Value to be assigned
     def id=(id)
-      if !id.nil? && id.to_s.length > 26
-        fail ArgumentError, 'invalid value for "id", the character length must be smaller than or equal to 26.'
-      end
-
       @id = id
     end
 

data/lib/cybersource_rest_client/models/v1_file_details_get200_response_file_details.rb

@@ -57,7 +57,7 @@ module CyberSource
         :'last_modified_time' => :'DateTime',
         :'date' => :'Date',
         :'mime_type' => :'String',
-        :'size' => :'Integer'
+        :'size' => :'Float'
       }
     end
 

data/lib/cybersource_rest_client/models/validate_export_compliance_request.rb

@@ -38,7 +38,7 @@ module CyberSource
     # Attribute type mapping.
     def self.swagger_types
       {
-        :'client_reference_information' => :'Riskv1addressverificationsClientReferenceInformation',
+        :'client_reference_information' => :'Riskv1decisionsClientReferenceInformation',
         :'order_information' => :'Riskv1exportcomplianceinquiriesOrderInformation',
         :'buyer_information' => :'Riskv1addressverificationsBuyerInformation',
         :'device_information' => :'Riskv1exportcomplianceinquiriesDeviceInformation',

data/lib/cybersource_rest_client/models/validate_request.rb

@@ -38,7 +38,7 @@ module CyberSource
     # Attribute type mapping.
     def self.swagger_types
       {
-        :'client_reference_information' => :'Riskv1authenticationsetupsClientReferenceInformation',
+        :'client_reference_information' => :'Riskv1decisionsClientReferenceInformation',
         :'processing_information' => :'Riskv1authenticationsetupsProcessingInformation',
         :'order_information' => :'Riskv1authenticationresultsOrderInformation',
         :'payment_information' => :'Riskv1authenticationresultsPaymentInformation',

data/lib/cybersource_rest_client/models/vas_v2_payments_post201_response.rb

@@ -98,27 +98,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@id.nil? && @id.to_s.length > 26
-        invalid_properties.push('invalid value for "id", the character length must be smaller than or equal to 26.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@id.nil? && @id.to_s.length > 26
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] id Value to be assigned
     def id=(id)
-      if !id.nil? && id.to_s.length > 26
-        fail ArgumentError, 'invalid value for "id", the character length must be smaller than or equal to 26.'
-      end
-
       @id = id
     end
 

data/lib/cybersource_rest_client/models/vas_v2_payments_post201_response_order_information.rb

@@ -94,57 +94,30 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@exempt_amount.nil? && @exempt_amount.to_s.length > 15
-        invalid_properties.push('invalid value for "exempt_amount", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@taxable_amount.nil? && @taxable_amount.to_s.length > 15
-        invalid_properties.push('invalid value for "taxable_amount", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@tax_amount.nil? && @tax_amount.to_s.length > 15
-        invalid_properties.push('invalid value for "tax_amount", the character length must be smaller than or equal to 15.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@exempt_amount.nil? && @exempt_amount.to_s.length > 15
-      return false if !@taxable_amount.nil? && @taxable_amount.to_s.length > 15
-      return false if !@tax_amount.nil? && @tax_amount.to_s.length > 15
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] exempt_amount Value to be assigned
     def exempt_amount=(exempt_amount)
-      if !exempt_amount.nil? && exempt_amount.to_s.length > 15
-        fail ArgumentError, 'invalid value for "exempt_amount", the character length must be smaller than or equal to 15.'
-      end
-
       @exempt_amount = exempt_amount
     end
 
     # Custom attribute writer method with validation
     # @param [Object] taxable_amount Value to be assigned
     def taxable_amount=(taxable_amount)
-      if !taxable_amount.nil? && taxable_amount.to_s.length > 15
-        fail ArgumentError, 'invalid value for "taxable_amount", the character length must be smaller than or equal to 15.'
-      end
-
       @taxable_amount = taxable_amount
     end
 
     # Custom attribute writer method with validation
     # @param [Object] tax_amount Value to be assigned
     def tax_amount=(tax_amount)
-      if !tax_amount.nil? && tax_amount.to_s.length > 15
-        fail ArgumentError, 'invalid value for "tax_amount", the character length must be smaller than or equal to 15.'
-      end
-
       @tax_amount = tax_amount
     end
 

data/lib/cybersource_rest_client/models/vas_v2_payments_post201_response_order_information_jurisdiction.rb

@@ -120,132 +120,66 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@type.nil? && @type.to_s.length > 15
-        invalid_properties.push('invalid value for "type", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@tax_name.nil? && @tax_name.to_s.length > 15
-        invalid_properties.push('invalid value for "tax_name", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@tax_amount.nil? && @tax_amount.to_s.length > 15
-        invalid_properties.push('invalid value for "tax_amount", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@taxable.nil? && @taxable.to_s.length > 15
-        invalid_properties.push('invalid value for "taxable", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@code.nil? && @code.to_s.length > 15
-        invalid_properties.push('invalid value for "code", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@rate.nil? && @rate.to_s.length > 15
-        invalid_properties.push('invalid value for "rate", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@region.nil? && @region.to_s.length > 15
-        invalid_properties.push('invalid value for "region", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@country.nil? && @country.to_s.length > 15
-        invalid_properties.push('invalid value for "country", the character length must be smaller than or equal to 15.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@type.nil? && @type.to_s.length > 15
-      return false if !@tax_name.nil? && @tax_name.to_s.length > 15
-      return false if !@tax_amount.nil? && @tax_amount.to_s.length > 15
-      return false if !@taxable.nil? && @taxable.to_s.length > 15
-      return false if !@code.nil? && @code.to_s.length > 15
-      return false if !@rate.nil? && @rate.to_s.length > 15
-      return false if !@region.nil? && @region.to_s.length > 15
-      return false if !@country.nil? && @country.to_s.length > 15
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] type Value to be assigned
     def type=(type)
-      if !type.nil? && type.to_s.length > 15
-        fail ArgumentError, 'invalid value for "type", the character length must be smaller than or equal to 15.'
-      end
-
       @type = type
     end
 
     # Custom attribute writer method with validation
     # @param [Object] tax_name Value to be assigned
     def tax_name=(tax_name)
-      if !tax_name.nil? && tax_name.to_s.length > 15
-        fail ArgumentError, 'invalid value for "tax_name", the character length must be smaller than or equal to 15.'
-      end
-
       @tax_name = tax_name
     end
 
     # Custom attribute writer method with validation
     # @param [Object] tax_amount Value to be assigned
     def tax_amount=(tax_amount)
-      if !tax_amount.nil? && tax_amount.to_s.length > 15
-        fail ArgumentError, 'invalid value for "tax_amount", the character length must be smaller than or equal to 15.'
-      end
-
       @tax_amount = tax_amount
     end
 
     # Custom attribute writer method with validation
     # @param [Object] taxable Value to be assigned
     def taxable=(taxable)
-      if !taxable.nil? && taxable.to_s.length > 15
-        fail ArgumentError, 'invalid value for "taxable", the character length must be smaller than or equal to 15.'
-      end
-
       @taxable = taxable
     end
 
+    # Custom attribute writer method with validation
+    # @param [Object] name Value to be assigned
+    def name=(name)
+      @name = name
+    end
+
     # Custom attribute writer method with validation
     # @param [Object] code Value to be assigned
     def code=(code)
-      if !code.nil? && code.to_s.length > 15
-        fail ArgumentError, 'invalid value for "code", the character length must be smaller than or equal to 15.'
-      end
-
       @code = code
     end
 
     # Custom attribute writer method with validation
     # @param [Object] rate Value to be assigned
     def rate=(rate)
-      if !rate.nil? && rate.to_s.length > 15
-        fail ArgumentError, 'invalid value for "rate", the character length must be smaller than or equal to 15.'
-      end
-
       @rate = rate
     end
 
     # Custom attribute writer method with validation
     # @param [Object] region Value to be assigned
     def region=(region)
-      if !region.nil? && region.to_s.length > 15
-        fail ArgumentError, 'invalid value for "region", the character length must be smaller than or equal to 15.'
-      end
-
       @region = region
     end
 
     # Custom attribute writer method with validation
     # @param [Object] country Value to be assigned
     def country=(country)
-      if !country.nil? && country.to_s.length > 15
-        fail ArgumentError, 'invalid value for "country", the character length must be smaller than or equal to 15.'
-      end
-
       @country = country
     end