cybersource_rest_client 0.0.26 → 0.0.31

data/lib/cybersource_rest_client/models/riskv1authenticationresults_consumer_authentication_information.rb

@@ -102,92 +102,42 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@authentication_transaction_id.nil? && @authentication_transaction_id.to_s.length > 20
-        invalid_properties.push('invalid value for "authentication_transaction_id", the character length must be smaller than or equal to 20.')
-      end
-
-      if !@authentication_type.nil? && @authentication_type.to_s.length > 2
-        invalid_properties.push('invalid value for "authentication_type", the character length must be smaller than or equal to 2.')
-      end
-
-      if !@effective_authentication_type.nil? && @effective_authentication_type.to_s.length > 2
-        invalid_properties.push('invalid value for "effective_authentication_type", the character length must be smaller than or equal to 2.')
-      end
-
-      if !@signed_pares_status_reason.nil? && @signed_pares_status_reason.to_s.length > 2
-        invalid_properties.push('invalid value for "signed_pares_status_reason", the character length must be smaller than or equal to 2.')
-      end
-
-      if @signed_pares.nil?
-        invalid_properties.push('invalid value for "signed_pares", signed_pares cannot be nil.')
-      end
-
-      if !@white_list_status.nil? && @white_list_status.to_s.length > 1
-        invalid_properties.push('invalid value for "white_list_status", the character length must be smaller than or equal to 1.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@authentication_transaction_id.nil? && @authentication_transaction_id.to_s.length > 20
-      return false if !@authentication_type.nil? && @authentication_type.to_s.length > 2
-      return false if !@effective_authentication_type.nil? && @effective_authentication_type.to_s.length > 2
-      return false if !@signed_pares_status_reason.nil? && @signed_pares_status_reason.to_s.length > 2
-      return false if @signed_pares.nil?
-      return false if !@white_list_status.nil? && @white_list_status.to_s.length > 1
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] authentication_transaction_id Value to be assigned
     def authentication_transaction_id=(authentication_transaction_id)
-      if !authentication_transaction_id.nil? && authentication_transaction_id.to_s.length > 20
-        fail ArgumentError, 'invalid value for "authentication_transaction_id", the character length must be smaller than or equal to 20.'
-      end
-
       @authentication_transaction_id = authentication_transaction_id
     end
 
     # Custom attribute writer method with validation
     # @param [Object] authentication_type Value to be assigned
     def authentication_type=(authentication_type)
-      if !authentication_type.nil? && authentication_type.to_s.length > 2
-        fail ArgumentError, 'invalid value for "authentication_type", the character length must be smaller than or equal to 2.'
-      end
-
       @authentication_type = authentication_type
     end
 
     # Custom attribute writer method with validation
     # @param [Object] effective_authentication_type Value to be assigned
     def effective_authentication_type=(effective_authentication_type)
-      if !effective_authentication_type.nil? && effective_authentication_type.to_s.length > 2
-        fail ArgumentError, 'invalid value for "effective_authentication_type", the character length must be smaller than or equal to 2.'
-      end
-
       @effective_authentication_type = effective_authentication_type
     end
 
     # Custom attribute writer method with validation
     # @param [Object] signed_pares_status_reason Value to be assigned
     def signed_pares_status_reason=(signed_pares_status_reason)
-      if !signed_pares_status_reason.nil? && signed_pares_status_reason.to_s.length > 2
-        fail ArgumentError, 'invalid value for "signed_pares_status_reason", the character length must be smaller than or equal to 2.'
-      end
-
       @signed_pares_status_reason = signed_pares_status_reason
     end
 
     # Custom attribute writer method with validation
     # @param [Object] white_list_status Value to be assigned
     def white_list_status=(white_list_status)
-      if !white_list_status.nil? && white_list_status.to_s.length > 1
-        fail ArgumentError, 'invalid value for "white_list_status", the character length must be smaller than or equal to 1.'
-      end
-
       @white_list_status = white_list_status
     end
 

data/lib/cybersource_rest_client/models/riskv1authenticationresults_order_information_line_items.rb

@@ -70,10 +70,6 @@ module CyberSource
         invalid_properties.push('invalid value for "unit_price", unit_price cannot be nil.')
       end
 
-      if @unit_price.to_s.length > 15
-        invalid_properties.push('invalid value for "unit_price", the character length must be smaller than or equal to 15.')
-      end
-
       if !@quantity.nil? && @quantity > 999999999
         invalid_properties.push('invalid value for "quantity", must be smaller than or equal to 999999999.')
       end
@@ -82,10 +78,6 @@ module CyberSource
         invalid_properties.push('invalid value for "quantity", must be greater than or equal to 1.')
       end
 
-      if !@tax_amount.nil? && @tax_amount.to_s.length > 15
-        invalid_properties.push('invalid value for "tax_amount", the character length must be smaller than or equal to 15.')
-      end
-
       invalid_properties
     end
 
@@ -93,10 +85,8 @@ module CyberSource
     # @return true if the model is valid
     def valid?
       return false if @unit_price.nil?
-      return false if @unit_price.to_s.length > 15
       return false if !@quantity.nil? && @quantity > 999999999
       return false if !@quantity.nil? && @quantity < 1
-      return false if !@tax_amount.nil? && @tax_amount.to_s.length > 15
       true
     end
 
@@ -107,10 +97,6 @@ module CyberSource
         fail ArgumentError, 'unit_price cannot be nil'
       end
 
-      if unit_price.to_s.length > 15
-        fail ArgumentError, 'invalid value for "unit_price", the character length must be smaller than or equal to 15.'
-      end
-
       @unit_price = unit_price
     end
 
@@ -131,10 +117,6 @@ module CyberSource
     # Custom attribute writer method with validation
     # @param [Object] tax_amount Value to be assigned
     def tax_amount=(tax_amount)
-      if !tax_amount.nil? && tax_amount.to_s.length > 15
-        fail ArgumentError, 'invalid value for "tax_amount", the character length must be smaller than or equal to 15.'
-      end
-
       @tax_amount = tax_amount
     end
 

data/lib/cybersource_rest_client/models/riskv1authenticationresults_payment_information_card.rb

@@ -17,7 +17,7 @@ module CyberSource
     # description: The BIN is the first six digits of the card's Primary Account Number (PAN). 
     attr_accessor :bin
 
-    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
+    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1,4] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. [^4]: For this card type, you must include the `paymentInformation.card.type` in your request for any payer authentication services.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
     attr_accessor :type
 
     # Two-digit month in which the payment card expires.  Format: `MM`.  Valid values: `01` through `12`. Leading 0 is required.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (`01` through `12`) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (_type_=039), if there is no expiration date on the card, use `12`.  #### FDMS Nashville Required field.  #### GPX Required if `pointOfSaleInformation.entryMode=keyed`. However, this field is optional if your account is configured for relaxed requirements for address data and expiration date. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### All other processors Required if `pointOfSaleInformation.entryMode=keyed`. However, this field is optional if your account is configured for relaxed requirements for address data and expiration date. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
@@ -84,77 +84,41 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@bin.nil? && @bin.to_s.length > 6
-        invalid_properties.push('invalid value for "bin", the character length must be smaller than or equal to 6.')
-      end
-
       if @type.nil?
         invalid_properties.push('invalid value for "type", type cannot be nil.')
       end
 
-      if !@expiration_month.nil? && @expiration_month.to_s.length > 2
-        invalid_properties.push('invalid value for "expiration_month", the character length must be smaller than or equal to 2.')
-      end
-
-      if !@expiration_year.nil? && @expiration_year.to_s.length > 4
-        invalid_properties.push('invalid value for "expiration_year", the character length must be smaller than or equal to 4.')
-      end
-
-      if !@number.nil? && @number.to_s.length > 20
-        invalid_properties.push('invalid value for "number", the character length must be smaller than or equal to 20.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@bin.nil? && @bin.to_s.length > 6
       return false if @type.nil?
-      return false if !@expiration_month.nil? && @expiration_month.to_s.length > 2
-      return false if !@expiration_year.nil? && @expiration_year.to_s.length > 4
-      return false if !@number.nil? && @number.to_s.length > 20
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] bin Value to be assigned
     def bin=(bin)
-      if !bin.nil? && bin.to_s.length > 6
-        fail ArgumentError, 'invalid value for "bin", the character length must be smaller than or equal to 6.'
-      end
-
       @bin = bin
     end
 
     # Custom attribute writer method with validation
     # @param [Object] expiration_month Value to be assigned
     def expiration_month=(expiration_month)
-      if !expiration_month.nil? && expiration_month.to_s.length > 2
-        fail ArgumentError, 'invalid value for "expiration_month", the character length must be smaller than or equal to 2.'
-      end
-
       @expiration_month = expiration_month
     end
 
     # Custom attribute writer method with validation
     # @param [Object] expiration_year Value to be assigned
     def expiration_year=(expiration_year)
-      if !expiration_year.nil? && expiration_year.to_s.length > 4
-        fail ArgumentError, 'invalid value for "expiration_year", the character length must be smaller than or equal to 4.'
-      end
-
       @expiration_year = expiration_year
     end
 
     # Custom attribute writer method with validation
     # @param [Object] number Value to be assigned
     def number=(number)
-      if !number.nil? && number.to_s.length > 20
-        fail ArgumentError, 'invalid value for "number", the character length must be smaller than or equal to 20.'
-      end
-
       @number = number
     end
 

data/lib/cybersource_rest_client/models/riskv1authenticationresults_payment_information_tokenized_card.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class Riskv1authenticationresultsPaymentInformationTokenizedCard
-    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
+    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1,4] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. [^4]: For this card type, you must include the `paymentInformation.card.type` in your request for any payer authentication services.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
     attr_accessor :type
 
     # One of two possible meanings: - The two-digit month in which a token expires. - The two-digit month in which a card expires. Format: `MM` Possible values: `01` through `12`  **NOTE** The meaning of this field is dependent on the payment processor that is returning the value in an authorization reply. Please see the processor-specific details below.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (`01` through `12`) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (`card_type=039`), if there is no expiration date on the card, use `12`.\\ **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Samsung Pay and Apple Pay Month in which the token expires. CyberSource includes this field in the reply message when it decrypts the payment blob for the tokenized transaction.  For processor-specific information, see the `customer_cc_expmo` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
@@ -79,18 +79,6 @@ module CyberSource
         invalid_properties.push('invalid value for "type", type cannot be nil.')
       end
 
-      if !@expiration_month.nil? && @expiration_month.to_s.length > 2
-        invalid_properties.push('invalid value for "expiration_month", the character length must be smaller than or equal to 2.')
-      end
-
-      if !@expiration_year.nil? && @expiration_year.to_s.length > 4
-        invalid_properties.push('invalid value for "expiration_year", the character length must be smaller than or equal to 4.')
-      end
-
-      if !@number.nil? && @number.to_s.length > 20
-        invalid_properties.push('invalid value for "number", the character length must be smaller than or equal to 20.')
-      end
-
       invalid_properties
     end
 
@@ -98,39 +86,24 @@ module CyberSource
     # @return true if the model is valid
     def valid?
       return false if @type.nil?
-      return false if !@expiration_month.nil? && @expiration_month.to_s.length > 2
-      return false if !@expiration_year.nil? && @expiration_year.to_s.length > 4
-      return false if !@number.nil? && @number.to_s.length > 20
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] expiration_month Value to be assigned
     def expiration_month=(expiration_month)
-      if !expiration_month.nil? && expiration_month.to_s.length > 2
-        fail ArgumentError, 'invalid value for "expiration_month", the character length must be smaller than or equal to 2.'
-      end
-
       @expiration_month = expiration_month
     end
 
     # Custom attribute writer method with validation
     # @param [Object] expiration_year Value to be assigned
     def expiration_year=(expiration_year)
-      if !expiration_year.nil? && expiration_year.to_s.length > 4
-        fail ArgumentError, 'invalid value for "expiration_year", the character length must be smaller than or equal to 4.'
-      end
-
       @expiration_year = expiration_year
     end
 
     # Custom attribute writer method with validation
     # @param [Object] number Value to be assigned
     def number=(number)
-      if !number.nil? && number.to_s.length > 20
-        fail ArgumentError, 'invalid value for "number", the character length must be smaller than or equal to 20.'
-      end
-
       @number = number
     end
 

data/lib/cybersource_rest_client/models/riskv1authentications_buyer_information.rb

@@ -14,6 +14,9 @@ require 'date'
 
 module CyberSource
   class Riskv1authenticationsBuyerInformation
+    # Your identifier for the customer.  When a subscription or customer profile is being created, the maximum length for this field for most processors is 30. Otherwise, the maximum length is 100.  #### Comercio Latino For recurring payments in Mexico, the value is the customer’s contract number. Note Before you request the authorization, you must inform the issuer of the customer contract numbers that will be used for recurring transactions.  #### Worldpay VAP For a follow-on credit with Worldpay VAP, CyberSource checks the following locations, in the order given, for a customer account ID value and uses the first value it finds: 1. `customer_account_id` value in the follow-on credit request 2. Customer account ID value that was used for the capture that is being credited 3. Customer account ID value that was used for the original authorization If a customer account ID value cannot be found in any of these locations, then no value is used.  For processor-specific information, see the `customer_account_id` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    attr_accessor :merchant_customer_id
+
     # This array contains detailed information about the buyer's form of persoanl identification.
     attr_accessor :personal_identification
 
@@ -23,6 +26,7 @@ module CyberSource
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
+        :'merchant_customer_id' => :'merchantCustomerId',
         :'personal_identification' => :'personalIdentification',
         :'mobile_phone' => :'mobilePhone'
       }
@@ -31,6 +35,7 @@ module CyberSource
     # Attribute type mapping.
     def self.swagger_types
       {
+        :'merchant_customer_id' => :'String',
         :'personal_identification' => :'Array<Ptsv2paymentsBuyerInformationPersonalIdentification>',
         :'mobile_phone' => :'Integer'
       }
@@ -44,6 +49,10 @@ module CyberSource
       # convert string to symbol for hash key
       attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
 
+      if attributes.has_key?(:'merchantCustomerId')
+        self.merchant_customer_id = attributes[:'merchantCustomerId']
+      end
+
       if attributes.has_key?(:'personalIdentification')
         if (value = attributes[:'personalIdentification']).is_a?(Array)
           self.personal_identification = value
@@ -73,11 +82,18 @@ module CyberSource
       true
     end
 
+    # Custom attribute writer method with validation
+    # @param [Object] merchant_customer_id Value to be assigned
+    def merchant_customer_id=(merchant_customer_id)
+      @merchant_customer_id = merchant_customer_id
+    end
+
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
+          merchant_customer_id == o.merchant_customer_id &&
           personal_identification == o.personal_identification &&
           mobile_phone == o.mobile_phone
     end
@@ -91,7 +107,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [personal_identification, mobile_phone].hash
+      [merchant_customer_id, personal_identification, mobile_phone].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/riskv1authentications_device_information.rb

@@ -148,147 +148,66 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@ip_address.nil? && @ip_address.to_s.length > 45
-        invalid_properties.push('invalid value for "ip_address", the character length must be smaller than or equal to 45.')
-      end
-
-      if !@http_accept_browser_value.nil? && @http_accept_browser_value.to_s.length > 255
-        invalid_properties.push('invalid value for "http_accept_browser_value", the character length must be smaller than or equal to 255.')
-      end
-
-      if !@http_accept_content.nil? && @http_accept_content.to_s.length > 256
-        invalid_properties.push('invalid value for "http_accept_content", the character length must be smaller than or equal to 256.')
-      end
-
-      if !@http_browser_language.nil? && @http_browser_language.to_s.length > 8
-        invalid_properties.push('invalid value for "http_browser_language", the character length must be smaller than or equal to 8.')
-      end
-
-      if !@http_browser_color_depth.nil? && @http_browser_color_depth.to_s.length > 2
-        invalid_properties.push('invalid value for "http_browser_color_depth", the character length must be smaller than or equal to 2.')
-      end
-
-      if !@http_browser_screen_height.nil? && @http_browser_screen_height.to_s.length > 6
-        invalid_properties.push('invalid value for "http_browser_screen_height", the character length must be smaller than or equal to 6.')
-      end
-
-      if !@http_browser_screen_width.nil? && @http_browser_screen_width.to_s.length > 6
-        invalid_properties.push('invalid value for "http_browser_screen_width", the character length must be smaller than or equal to 6.')
-      end
-
-      if !@http_browser_time_difference.nil? && @http_browser_time_difference.to_s.length > 5
-        invalid_properties.push('invalid value for "http_browser_time_difference", the character length must be smaller than or equal to 5.')
-      end
-
-      if !@user_agent_browser_value.nil? && @user_agent_browser_value.to_s.length > 255
-        invalid_properties.push('invalid value for "user_agent_browser_value", the character length must be smaller than or equal to 255.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@ip_address.nil? && @ip_address.to_s.length > 45
-      return false if !@http_accept_browser_value.nil? && @http_accept_browser_value.to_s.length > 255
-      return false if !@http_accept_content.nil? && @http_accept_content.to_s.length > 256
-      return false if !@http_browser_language.nil? && @http_browser_language.to_s.length > 8
-      return false if !@http_browser_color_depth.nil? && @http_browser_color_depth.to_s.length > 2
-      return false if !@http_browser_screen_height.nil? && @http_browser_screen_height.to_s.length > 6
-      return false if !@http_browser_screen_width.nil? && @http_browser_screen_width.to_s.length > 6
-      return false if !@http_browser_time_difference.nil? && @http_browser_time_difference.to_s.length > 5
-      return false if !@user_agent_browser_value.nil? && @user_agent_browser_value.to_s.length > 255
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] ip_address Value to be assigned
     def ip_address=(ip_address)
-      if !ip_address.nil? && ip_address.to_s.length > 45
-        fail ArgumentError, 'invalid value for "ip_address", the character length must be smaller than or equal to 45.'
-      end
-
       @ip_address = ip_address
     end
 
     # Custom attribute writer method with validation
     # @param [Object] http_accept_browser_value Value to be assigned
     def http_accept_browser_value=(http_accept_browser_value)
-      if !http_accept_browser_value.nil? && http_accept_browser_value.to_s.length > 255
-        fail ArgumentError, 'invalid value for "http_accept_browser_value", the character length must be smaller than or equal to 255.'
-      end
-
       @http_accept_browser_value = http_accept_browser_value
     end
 
     # Custom attribute writer method with validation
     # @param [Object] http_accept_content Value to be assigned
     def http_accept_content=(http_accept_content)
-      if !http_accept_content.nil? && http_accept_content.to_s.length > 256
-        fail ArgumentError, 'invalid value for "http_accept_content", the character length must be smaller than or equal to 256.'
-      end
-
       @http_accept_content = http_accept_content
     end
 
     # Custom attribute writer method with validation
     # @param [Object] http_browser_language Value to be assigned
     def http_browser_language=(http_browser_language)
-      if !http_browser_language.nil? && http_browser_language.to_s.length > 8
-        fail ArgumentError, 'invalid value for "http_browser_language", the character length must be smaller than or equal to 8.'
-      end
-
       @http_browser_language = http_browser_language
     end
 
     # Custom attribute writer method with validation
     # @param [Object] http_browser_color_depth Value to be assigned
     def http_browser_color_depth=(http_browser_color_depth)
-      if !http_browser_color_depth.nil? && http_browser_color_depth.to_s.length > 2
-        fail ArgumentError, 'invalid value for "http_browser_color_depth", the character length must be smaller than or equal to 2.'
-      end
-
       @http_browser_color_depth = http_browser_color_depth
     end
 
     # Custom attribute writer method with validation
     # @param [Object] http_browser_screen_height Value to be assigned
     def http_browser_screen_height=(http_browser_screen_height)
-      if !http_browser_screen_height.nil? && http_browser_screen_height.to_s.length > 6
-        fail ArgumentError, 'invalid value for "http_browser_screen_height", the character length must be smaller than or equal to 6.'
-      end
-
       @http_browser_screen_height = http_browser_screen_height
     end
 
     # Custom attribute writer method with validation
     # @param [Object] http_browser_screen_width Value to be assigned
     def http_browser_screen_width=(http_browser_screen_width)
-      if !http_browser_screen_width.nil? && http_browser_screen_width.to_s.length > 6
-        fail ArgumentError, 'invalid value for "http_browser_screen_width", the character length must be smaller than or equal to 6.'
-      end
-
       @http_browser_screen_width = http_browser_screen_width
     end
 
     # Custom attribute writer method with validation
     # @param [Object] http_browser_time_difference Value to be assigned
     def http_browser_time_difference=(http_browser_time_difference)
-      if !http_browser_time_difference.nil? && http_browser_time_difference.to_s.length > 5
-        fail ArgumentError, 'invalid value for "http_browser_time_difference", the character length must be smaller than or equal to 5.'
-      end
-
       @http_browser_time_difference = http_browser_time_difference
     end
 
     # Custom attribute writer method with validation
     # @param [Object] user_agent_browser_value Value to be assigned
     def user_agent_browser_value=(user_agent_browser_value)
-      if !user_agent_browser_value.nil? && user_agent_browser_value.to_s.length > 255
-        fail ArgumentError, 'invalid value for "user_agent_browser_value", the character length must be smaller than or equal to 255.'
-      end
-
       @user_agent_browser_value = user_agent_browser_value
     end