cybersource_rest_client 0.0.22 → 0.0.24

data/lib/cybersource_rest_client/models/risk_v1_export_compliance_inquiries_post201_response.rb

@@ -16,10 +16,10 @@ module CyberSource
   class RiskV1ExportComplianceInquiriesPost201Response
     attr_accessor :_links
 
-    # An unique identification number assigned by CyberSource to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response. 
+    # An unique identification number to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response.  #### PIN debit Returned for all PIN debit services. 
     attr_accessor :id
 
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # Time that the transaction was submitted in local time.
@@ -28,9 +28,6 @@ module CyberSource
     # The status for the call can be: - COMPLETED - INVALID_REQUEST - DECLINED 
     attr_accessor :status
 
-    # The reason of the status. Value can be   - CUSTOMER_WATCHLIST_MATCH   - ADDRESS_COUNTRY_WATCHLIST_MATCH   - EMAIL_COUNTRY_WATCHLIST_MATCH   - IP_COUNTRY_WATCHLIST_MATCH 
-    attr_accessor :reason
-
     # The message describing the reason of the status. Value can be   - The customer matched the Denied Parties List   - The Export bill_country/ship_country  match   - Export email_country match   - Export hostname_country/ip_country match 
     attr_accessor :message
 
@@ -48,7 +45,6 @@ module CyberSource
         :'submit_time_utc' => :'submitTimeUtc',
         :'submit_time_local' => :'submitTimeLocal',
         :'status' => :'status',
-        :'reason' => :'reason',
         :'message' => :'message',
         :'client_reference_information' => :'clientReferenceInformation',
         :'export_compliance_information' => :'exportComplianceInformation',
@@ -64,11 +60,10 @@ module CyberSource
         :'submit_time_utc' => :'String',
         :'submit_time_local' => :'String',
         :'status' => :'String',
-        :'reason' => :'String',
         :'message' => :'String',
         :'client_reference_information' => :'PtsV2IncrementalAuthorizationPatch201ResponseClientReferenceInformation',
         :'export_compliance_information' => :'RiskV1ExportComplianceInquiriesPost201ResponseExportComplianceInformation',
-        :'error_information' => :'PtsV2PaymentsPost201ResponseErrorInformation'
+        :'error_information' => :'RiskV1ExportComplianceInquiriesPost201ResponseErrorInformation'
       }
     end
 
@@ -100,10 +95,6 @@ module CyberSource
         self.status = attributes[:'status']
       end
 
-      if attributes.has_key?(:'reason')
-        self.reason = attributes[:'reason']
-      end
-
       if attributes.has_key?(:'message')
         self.message = attributes[:'message']
       end
@@ -159,7 +150,6 @@ module CyberSource
           submit_time_utc == o.submit_time_utc &&
           submit_time_local == o.submit_time_local &&
           status == o.status &&
-          reason == o.reason &&
           message == o.message &&
           client_reference_information == o.client_reference_information &&
           export_compliance_information == o.export_compliance_information &&
@@ -175,7 +165,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [_links, id, submit_time_utc, submit_time_local, status, reason, message, client_reference_information, export_compliance_information, error_information].hash
+      [_links, id, submit_time_utc, submit_time_local, status, message, client_reference_information, export_compliance_information, error_information].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/risk_v1_export_compliance_inquiries_post201_response_error_information.rb

@@ -0,0 +1,205 @@
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class RiskV1ExportComplianceInquiriesPost201ResponseErrorInformation
+    # The reason of the status. Value can be   - `CUSTOMER_WATCHLIST_MATCH`   - `ADDRESS_COUNTRY_WATCHLIST_MATCH`   - `EMAIL_COUNTRY_WATCHLIST_MATCH`   - `IP_COUNTRY_WATCHLIST_MATCH`   - `INVALID_MERCHANT_CONFIGURATION` 
+    attr_accessor :reason
+
+    # The detail message related to the status and reason listed above.
+    attr_accessor :message
+
+    attr_accessor :details
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'reason' => :'reason',
+        :'message' => :'message',
+        :'details' => :'details'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'reason' => :'String',
+        :'message' => :'String',
+        :'details' => :'Array<PtsV2PaymentsPost201ResponseErrorInformationDetails>'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'reason')
+        self.reason = attributes[:'reason']
+      end
+
+      if attributes.has_key?(:'message')
+        self.message = attributes[:'message']
+      end
+
+      if attributes.has_key?(:'details')
+        if (value = attributes[:'details']).is_a?(Array)
+          self.details = value
+        end
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          reason == o.reason &&
+          message == o.message &&
+          details == o.details
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [reason, message, details].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end

data/lib/cybersource_rest_client/models/risk_v1_update_post201_response.rb

@@ -18,13 +18,13 @@ module CyberSource
 
     attr_accessor :client_reference_informaton
 
-    # An unique identification number assigned by CyberSource to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response. 
+    # An unique identification number to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response.  #### PIN debit Returned for all PIN debit services. 
     attr_accessor :id
 
     # The status for risk update 201 calls. Possible values are: - INVALID_REQUEST - COMPLETED 
     attr_accessor :status
 
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/riskv1addressverifications_client_reference_information.rb

@@ -14,10 +14,10 @@ require 'date'
 
 module CyberSource
   class Riskv1addressverificationsClientReferenceInformation
-    # Client-generated order reference or tracking number. CyberSource recommends that you send a unique value for each transaction so that you can perform meaningful searches for the transaction.  For information about tracking orders, see \"Tracking and Reconciling Your Orders\" in [Getting Started with CyberSource Advanced for the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/Getting_Started_SCMP/html/)  #### FDC Nashville Global Certain circumstances can cause the processor to truncate this value to 15 or 17 characters for Level II and Level III processing, which can cause a discrepancy between the value you submit and the value included in some processor reports. 
+    # Merchant-generated order reference or tracking number. It is recommended that you send a unique value for each transaction so that you can perform meaningful searches for the transaction.  #### Used by **Authorization** Required field.  #### PIN Debit Requests for PIN debit reversals need to use the same merchant reference number that was used in the transaction that is being reversed.  Required field for all PIN Debit requests (purchase, credit, and reversal).  #### FDC Nashville Global Certain circumstances can cause the processor to truncate this value to 15 or 17 characters for Level II and Level III processing, which can cause a discrepancy between the value you submit and the value included in some processor reports. 
     attr_accessor :code
 
-    # Brief description of the order or any comment you wish to add to the order.
+    # Brief description of the order or any comment you wish to add to the order. 
     attr_accessor :comments
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/riskv1addressverifications_order_information_bill_to.rb

@@ -14,10 +14,10 @@ require 'date'
 
 module CyberSource
   class Riskv1addressverificationsOrderInformationBillTo
-    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_address1` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate orderInformation.billTo.address1 and orderInformation.billTo.address2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville When the street name is numeric, it must be sent in numeric format. For example, if the address is _One First Street_, it must be sent as _1 1st Street_.  Required if keyed; not used if swiped.  String (20)  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional. String (60)  #### For Payouts This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
     attr_accessor :address1
 
-    # Additional address information.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### CyberSource through VisaNet **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the `bill_address2` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Used for additional address information. For example: _Attention: Accounts Payable_ Optional field.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate `orderInformation.billTo.address1` and `orderInformation.billTo.address2`, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### FDMS Nashville `orderInformation.billTo.address1` and `orderInformation.billTo.address2` together cannot exceed 20 characters. String (20)  #### All Other Processors String (60) 
     attr_accessor :address2
 
     # Additional address information (third line of the billing address) 
@@ -26,16 +26,16 @@ module CyberSource
     # Additional address information (fourth line of the billing address) 
     attr_accessor :address4
 
-    # State or province of the billing address. Use the State, Province, and Territory Codes for the United States and Canada.  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_state` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # State or province of the billing address. Use the [State, Province, and Territory Codes for the United States and Canada](https://developer.cybersource.com/library/documentation/sbc/quickref/states_and_provinces.pdf).  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :administrative_area
 
-    # Payment card billing country. Use the two-character ISO Standard Country Codes.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_country` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing country. Use the two-character [ISO Standard Country Codes](http://apps.cybersource.com/library/documentation/sbc/quickref/countries_alpha_list.pdf).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :country
 
-    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the `bill_city` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :locality
 
-    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the `bill_zip` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville Required if `pointOfSaleInformation.entryMode=keyed` and the address is in the U.S. or Canada. Optional if `pointOfSaleInformation.entryMode=keyed` and the address is **not** in the U.S. or Canada. Not used if swiped.  #### RBS WorldPay Atlanta: For best card-present keyed rates, send the postal code if `pointOfSaleInformation.entryMode=keyed`.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional field. 
     attr_accessor :postal_code
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/riskv1addressverifications_order_information_line_items.rb

@@ -14,22 +14,22 @@ require 'date'
 
 module CyberSource
   class Riskv1addressverificationsOrderInformationLineItems
-    # Per-item price of the product. This value cannot be negative. You can include a decimal point (.), but you cannot include any other special characters. CyberSource truncates the amount to the correct number of decimal places.  For processor-specific information, see the `amount` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. See these guides for details: - [Merchant Descriptors Using the SCMP API Guide] (https://apps.cybersource.com/library/documentation/dev_guides/Merchant_Descriptors_SCMP_API/html/) - \"Capture Information for Specific Processors\" section in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either the 1st line item in the order and this field, or the request-level field `orderInformation.amountDetails.totalAmount` in your request. For details, see \"Dynamic Currency Conversion with a Third Party Provider\" in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in the [Merchant Descriptors Using the SCMP API Guide.] (https://apps.cybersource.com/library/documentation/dev_guides/Merchant_Descriptors_SCMP_API/html/)  #### Zero Amount Authorizations If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. See \"Zero Amount Authorizations\" in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/) 
+    # Per-item price of the product. This value for this field cannot be negative.  You must include either this field or the request-level field `orderInformation.amountDetails.totalAmount` in your request.  You can include a decimal point (.), but you cannot include any other special characters. The value is truncated to the correct number of decimal places.  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either the 1st line item in the order and this field, or the request-level field `orderInformation.amountDetails.totalAmount` in your request.  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in the [Merchant Descriptors Using the SCMP API Guide.] (https://apps.cybersource.com/library/documentation/dev_guides/Merchant_Descriptors_SCMP_API/html/)  #### Tax Calculation Required field for U.S., Canadian, international and value added taxes.  #### Zero Amount Authorizations If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen.  #### Maximum Field Lengths For GPN and JCN Gateway: Decimal (10) All other processors: Decimal (15) 
     attr_accessor :unit_price
 
-    # Number of units for this order.  The default is `1`. For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when _orderInformation.lineItems[].productCode_ is not set to **default** or one of the other values that are related to shipping and/or handling.  When orderInformation.lineItems[].productCode is \"gift_card\", this is the total count of individual prepaid gift cards purchased. 
+    # Number of units for this order. Must be a non-negative integer.  The default is `1`. For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not `default` or one of the other values related to shipping and/or handling.  #### Tax Calculation Optional field for U.S., Canadian, international tax, and value added taxes. 
     attr_accessor :quantity
 
-    # Stock Keeping Unit (SKU) code for the product.  For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when _orderInformation.lineItems[].productCode_ is not set to **default** or one of the other values that are related to shipping and/or handling. 
+    # Product identifier code. Also known as the Stock Keeping Unit (SKU) code for the product.  For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not set to **default** or one of the other values that are related to shipping and/or handling.  #### Tax Calculation Optional field for U.S. and Canadian taxes. Not applicable to international and value added taxes. For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not `default` or one of the values related to shipping and/or handling. 
     attr_accessor :product_sku
 
     # Indicates the level of risk for the product. This field can contain one of the following values: - `low`: The product is associated with few chargebacks. - `normal`: The product is associated with a normal number of chargebacks. - `high`: The product is associated with many chargebacks. 
     attr_accessor :product_risk
 
-    # For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not set to `default` or one of the other values that are related to shipping and/or handling. 
+    # For an authorization or capture transaction (`processingOptions.capture` is `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not `default` or one of the other values that are related to shipping and/or handling.  #### Tax Calculation Optional field for U.S., Canadian, international tax, and value added taxes. 
     attr_accessor :product_name
 
-    # Type of product. This value is used to determine the category that the product is in: electronic, handling, physical, service, or shipping. The default value is **default**. If you are performing an authorization transaction (`processingOptions.capture` is set to `false`), and you set this field to a value other than default or any of the values related to shipping and handling, then the fields `quantity`, `productName`, and `productSku` are required. It can also have a value of \"gift_card\".  For details, see the `product_code` field description in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/) 
+    # Type of product. The value for this field is used to identify the product category (electronic, handling, physical, service, or shipping). The default value is `default`.  If you are performing an authorization transaction (`processingOptions.capture` is set to `false`), and you set this field to a value other than `default` or one of the values related to shipping and/or handling, then `orderInformation.lineItems[].quantity`, `orderInformation.lineItems[].productName`, and `orderInformation.lineItems[].productSku` fields are required.  Optional field.  For details, see the `product_code` field description in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  #### Tax Calculation Optional field for U.S., Canadian, international tax, and value added taxes.  To use the tax calculation service, use values listed in the Tax Product Code Guide. For information about this document, contact customer support. See \"Product Codes,\" page 14, for more information. 
     attr_accessor :product_code
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/riskv1addressverifications_order_information_ship_to.rb

@@ -14,28 +14,28 @@ require 'date'
 
 module CyberSource
   class Riskv1addressverificationsOrderInformationShipTo
-    # First line of the shipping address.
+    # First line of the shipping address.  Required field for authorization if any shipping address information is included in the request; otherwise, optional.  #### Tax Calculation Optional field for U.S. and Canadian taxes. Not applicable to international and value added taxes. Billing address objects will be used to determine the cardholder’s location when shipTo objects are not present. 
     attr_accessor :address1
 
-    # Second line of the shipping address.
+    # Second line of the shipping address.  Optional field.  #### Tax Calculation Optional field for U.S. and Canadian taxes. Not applicable to international and value added taxes. Billing address objects will be used to determine the cardholder’s location when shipTo objects are not present. 
     attr_accessor :address2
 
-    # Third line of the shipping address.
+    # Third line of the shipping address.  #### Tax Calculation Optional field for U.S. and Canadian taxes. Not applicable to international and value added taxes. Billing address objects will be used to determine the cardholder’s location when shipTo objects are not present. 
     attr_accessor :address3
 
     # Fourth line of the shipping address.
     attr_accessor :address4
 
-    # State or province of the shipping address. Use the State, Province, and Territory Codes for the United States and Canada. 
+    # State or province of the shipping address. Use the [State, Province, and Territory Codes for the United States and Canada](https://developer.cybersource.com/library/documentation/sbc/quickref/states_and_provinces.pdf)  Required field for authorization if any shipping address information is included in the request and shipping to the U.S. or Canada; otherwise, optional.  #### Tax Calculation Optional field for U.S. and Canadian taxes. Not applicable to international and value added taxes. Billing address objects will be used to determine the cardholder’s location when shipTo objects are not present. 
     attr_accessor :administrative_area
 
-    # Country of the shipping address. Use the two-character ISO Standard Country Codes.
+    # Country of the shipping address. Use the two-character [ISO Standard Country Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/countries_alpha_list.pdf)  Required field for authorization if any shipping address information is included in the request; otherwise, optional.  #### Tax Calculation Optional field for U.S., Canadian, international tax, and value added taxes. Billing address objects will be used to determine the cardholder’s location when shipTo objects are not present. 
     attr_accessor :country
 
-    # City of the shipping address.
+    # City of the shipping address.  Required field for authorization if any shipping address information is included in the request and shipping to the U.S. or Canada; otherwise, optional.  #### Tax Calculation Optional field for U.S. and Canadian taxes. Not applicable to international and value added taxes. Billing address objects will be used to determine the cardholder’s location when shipTo objects are not present. 
     attr_accessor :locality
 
-    # Postal code for the shipping address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  Example 12345-6789  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  Example A1B 2C3  **American Express Direct**\\ Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side. 
+    # Postal code for the shipping address. The postal code must consist of 5 to 9 digits.  Required field for authorization if any shipping address information is included in the request and shipping to the U.S. or Canada; otherwise, optional.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  Example 12345-6789  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  Example A1B 2C3  #### American Express Direct Before sending the postal code to the processor, all nonalphanumeric characters are removed and, if the remaining value is longer than nine characters, the value is truncated starting from the right side. #### Tax Calculation Optional field for U.S. and Canadian taxes. Not applicable to international and value added taxes. Billing address objects will be used to determine the cardholder’s location when shipTo objects are not present. 
     attr_accessor :postal_code
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/riskv1authenticationresults_consumer_authentication_information.rb

@@ -23,6 +23,9 @@ module CyberSource
     # This field describes the type of 3DS transaction flow that took place.  It can be one of three possible flows; CH - Challenge FR - Frictionless FD - Frictionless with delegation, (challenge not generated by the issuer but by the scheme on behalf of the issuer). 
     attr_accessor :effective_authentication_type
 
+    # A JWT returned by 3DS provider once the authentication is complete, required in cruise hybrid integration method when using CyberSource generated access token. 
+    attr_accessor :response_access_token
+
     # Provides additional information as to why the PAResStatus has a specific value. 
     attr_accessor :signed_pares_status_reason
 
@@ -38,6 +41,7 @@ module CyberSource
         :'authentication_transaction_id' => :'authenticationTransactionId',
         :'authentication_type' => :'authenticationType',
         :'effective_authentication_type' => :'effectiveAuthenticationType',
+        :'response_access_token' => :'responseAccessToken',
         :'signed_pares_status_reason' => :'signedParesStatusReason',
         :'signed_pares' => :'signedPares',
         :'white_list_status' => :'whiteListStatus'
@@ -50,6 +54,7 @@ module CyberSource
         :'authentication_transaction_id' => :'String',
         :'authentication_type' => :'String',
         :'effective_authentication_type' => :'String',
+        :'response_access_token' => :'String',
         :'signed_pares_status_reason' => :'String',
         :'signed_pares' => :'String',
         :'white_list_status' => :'String'
@@ -76,6 +81,10 @@ module CyberSource
         self.effective_authentication_type = attributes[:'effectiveAuthenticationType']
       end
 
+      if attributes.has_key?(:'responseAccessToken')
+        self.response_access_token = attributes[:'responseAccessToken']
+      end
+
       if attributes.has_key?(:'signedParesStatusReason')
         self.signed_pares_status_reason = attributes[:'signedParesStatusReason']
       end
@@ -105,6 +114,10 @@ module CyberSource
         invalid_properties.push('invalid value for "effective_authentication_type", the character length must be smaller than or equal to 2.')
       end
 
+      if !@response_access_token.nil? && @response_access_token.to_s.length > 2048
+        invalid_properties.push('invalid value for "response_access_token", the character length must be smaller than or equal to 2048.')
+      end
+
       if !@signed_pares_status_reason.nil? && @signed_pares_status_reason.to_s.length > 2
         invalid_properties.push('invalid value for "signed_pares_status_reason", the character length must be smaller than or equal to 2.')
       end
@@ -126,6 +139,7 @@ module CyberSource
       return false if !@authentication_transaction_id.nil? && @authentication_transaction_id.to_s.length > 20
       return false if !@authentication_type.nil? && @authentication_type.to_s.length > 2
       return false if !@effective_authentication_type.nil? && @effective_authentication_type.to_s.length > 2
+      return false if !@response_access_token.nil? && @response_access_token.to_s.length > 2048
       return false if !@signed_pares_status_reason.nil? && @signed_pares_status_reason.to_s.length > 2
       return false if @signed_pares.nil?
       return false if !@white_list_status.nil? && @white_list_status.to_s.length > 1
@@ -162,6 +176,16 @@ module CyberSource
       @effective_authentication_type = effective_authentication_type
     end
 
+    # Custom attribute writer method with validation
+    # @param [Object] response_access_token Value to be assigned
+    def response_access_token=(response_access_token)
+      if !response_access_token.nil? && response_access_token.to_s.length > 2048
+        fail ArgumentError, 'invalid value for "response_access_token", the character length must be smaller than or equal to 2048.'
+      end
+
+      @response_access_token = response_access_token
+    end
+
     # Custom attribute writer method with validation
     # @param [Object] signed_pares_status_reason Value to be assigned
     def signed_pares_status_reason=(signed_pares_status_reason)
@@ -190,6 +214,7 @@ module CyberSource
           authentication_transaction_id == o.authentication_transaction_id &&
           authentication_type == o.authentication_type &&
           effective_authentication_type == o.effective_authentication_type &&
+          response_access_token == o.response_access_token &&
           signed_pares_status_reason == o.signed_pares_status_reason &&
           signed_pares == o.signed_pares &&
           white_list_status == o.white_list_status
@@ -204,7 +229,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [authentication_transaction_id, authentication_type, effective_authentication_type, signed_pares_status_reason, signed_pares, white_list_status].hash
+      [authentication_transaction_id, authentication_type, effective_authentication_type, response_access_token, signed_pares_status_reason, signed_pares, white_list_status].hash
     end
 
     # Builds the object from hash