cybersource_rest_client 0.0.22 → 0.0.24

data/lib/cybersource_rest_client/models/invoicing_v2_invoices_get200_response_transaction_details.rb

@@ -18,7 +18,7 @@ module CyberSource
     # Payer auth Transaction identifier.
     attr_accessor :transaction_id
 
-    # Grand total for the order. This value cannot be negative. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. For details, see: - \"Authorization Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Capture Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Credit Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. For details, see \"Zero Amount Authorizations,\" \"Credit Information for Specific Processors\" in [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either this field or the 1st line item in the order and the specific line-order amount in your request. For details, see `grand_total_amount` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in \"Authorization Information for Specific Processors\" of the [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC for First Data Not used.  #### Invoicing Grand total for the order, this is required for creating a new invoice. 
+    # Grand total for the order. This value cannot be negative. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. For details, see: - \"Authorization Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Capture Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Credit Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. For details, see \"Zero Amount Authorizations,\" \"Credit Information for Specific Processors\" in [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### Card Present Required to include either this field or `orderInformation.lineItems[].unitPrice` for the order.  #### Invoicing Required for creating a new invoice.  #### PIN Debit Amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount.  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit; however, for all other processors, these fields are required.  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either this field or the 1st line item in the order and the specific line-order amount in your request. For details, see `grand_total_amount` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in \"Authorization Information for Specific Processors\" of the [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC for First Data Not used. 
     attr_accessor :amount
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/invoicing_v2_invoices_post201_response.rb

@@ -16,10 +16,10 @@ module CyberSource
   class InvoicingV2InvoicesPost201Response
     attr_accessor :_links
 
-    # An unique identification number assigned by CyberSource to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response. 
+    # An unique identification number to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response.  #### PIN debit Returned for all PIN debit services. 
     attr_accessor :id
 
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # The status of the invoice.  Possible values: - DRAFT - CREATED - SENT - PARTIAL - PAID - CANCELED 

data/lib/cybersource_rest_client/models/invoicing_v2_invoices_post201_response_order_information_amount_details.rb

@@ -15,16 +15,16 @@ require 'date'
 module CyberSource
   # Contains all of the amount-related fields in the invoice.
   class InvoicingV2InvoicesPost201ResponseOrderInformationAmountDetails
-    # Grand total for the order. This value cannot be negative. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. For details, see: - \"Authorization Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Capture Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Credit Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. For details, see \"Zero Amount Authorizations,\" \"Credit Information for Specific Processors\" in [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either this field or the 1st line item in the order and the specific line-order amount in your request. For details, see `grand_total_amount` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in \"Authorization Information for Specific Processors\" of the [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC for First Data Not used.  #### Invoicing Grand total for the order, this is required for creating a new invoice. 
+    # Grand total for the order. This value cannot be negative. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. For details, see: - \"Authorization Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Capture Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Credit Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. For details, see \"Zero Amount Authorizations,\" \"Credit Information for Specific Processors\" in [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### Card Present Required to include either this field or `orderInformation.lineItems[].unitPrice` for the order.  #### Invoicing Required for creating a new invoice.  #### PIN Debit Amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount.  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit; however, for all other processors, these fields are required.  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either this field or the 1st line item in the order and the specific line-order amount in your request. For details, see `grand_total_amount` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in \"Authorization Information for Specific Processors\" of the [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC for First Data Not used. 
     attr_accessor :total_amount
 
-    # Currency used for the order. Use the three-character I[ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  For details about currency as used in partial authorizations, see \"Features for Debit Cards and Prepaid Cards\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### DCC for First Data Your local currency. For details, see the `currency` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf). 
+    # Currency used for the order. Use the three-character [ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  #### Used by **Authorization** Required field.  **Authorization Reversal** For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### PIN Debit Currency for the amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf). Returned by PIN debit purchase.  For PIN debit reversal requests, you must use the same currency that was used for the PIN debit purchase or PIN debit credit that you are reversing. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf).  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit.  #### DCC for First Data Your local currency. For details, see the `currency` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### Tax Calculation Required for international tax and value added tax only. Optional for U.S. and Canadian taxes. Your local currency. 
     attr_accessor :currency
 
-    # Remaining balance on the account. 
+    # Remaining balance on the account.  Returned by authorization service.  #### PIN debit Remaining balance on the prepaid card.  Returned by PIN debit purchase. 
     attr_accessor :balance_amount
 
-    # Total discount amount applied to the order.  For processor-specific information, see the order_discount_amount field in [Level II and Level III Processing Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/Level_2_3_SCMP_API/html) 
+    # Total discount amount applied to the order. 
     attr_accessor :discount_amount
 
     # The total discount percentage applied to the invoice.

data/lib/cybersource_rest_client/models/invoicing_v2_invoices_post202_response.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class InvoicingV2InvoicesPost202Response
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # The status of the invoice.  Possible values: - DRAFT - CREATED - SENT - PARTIAL - PAID - CANCELED 

data/lib/cybersource_rest_client/models/invoicingv2invoices_customer_information.rb

@@ -18,7 +18,7 @@ module CyberSource
     # Payer name for the invoice.
     attr_accessor :name
 
-    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link. 
+    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :email
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/invoicingv2invoices_order_information_amount_details.rb

@@ -15,13 +15,13 @@ require 'date'
 module CyberSource
   # Contains all of the amount-related fields in the invoice.
   class Invoicingv2invoicesOrderInformationAmountDetails
-    # Grand total for the order. This value cannot be negative. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. For details, see: - \"Authorization Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Capture Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Credit Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. For details, see \"Zero Amount Authorizations,\" \"Credit Information for Specific Processors\" in [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either this field or the 1st line item in the order and the specific line-order amount in your request. For details, see `grand_total_amount` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in \"Authorization Information for Specific Processors\" of the [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC for First Data Not used.  #### Invoicing Grand total for the order, this is required for creating a new invoice. 
+    # Grand total for the order. This value cannot be negative. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. For details, see: - \"Authorization Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Capture Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Credit Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. For details, see \"Zero Amount Authorizations,\" \"Credit Information for Specific Processors\" in [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### Card Present Required to include either this field or `orderInformation.lineItems[].unitPrice` for the order.  #### Invoicing Required for creating a new invoice.  #### PIN Debit Amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount.  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit; however, for all other processors, these fields are required.  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either this field or the 1st line item in the order and the specific line-order amount in your request. For details, see `grand_total_amount` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in \"Authorization Information for Specific Processors\" of the [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC for First Data Not used. 
     attr_accessor :total_amount
 
-    # Currency used for the order. Use the three-character I[ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  For details about currency as used in partial authorizations, see \"Features for Debit Cards and Prepaid Cards\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### DCC for First Data Your local currency. For details, see the `currency` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf). 
+    # Currency used for the order. Use the three-character [ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  #### Used by **Authorization** Required field.  **Authorization Reversal** For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### PIN Debit Currency for the amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf). Returned by PIN debit purchase.  For PIN debit reversal requests, you must use the same currency that was used for the PIN debit purchase or PIN debit credit that you are reversing. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf).  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit.  #### DCC for First Data Your local currency. For details, see the `currency` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### Tax Calculation Required for international tax and value added tax only. Optional for U.S. and Canadian taxes. Your local currency. 
     attr_accessor :currency
 
-    # Total discount amount applied to the order.  For processor-specific information, see the order_discount_amount field in [Level II and Level III Processing Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/Level_2_3_SCMP_API/html) 
+    # Total discount amount applied to the order. 
     attr_accessor :discount_amount
 
     # The total discount percentage applied to the invoice.

data/lib/cybersource_rest_client/models/invoicingv2invoices_order_information_amount_details_tax_details.rb

@@ -18,7 +18,7 @@ module CyberSource
     # Indicates the type of tax data for the _taxDetails_ object.  Possible values:  - `alternate` - `local` - `national` - `vat` - `other`  For processor-specific details, see the `alternate_tax_amount`, `local_tax`, `national_tax` or `vat_tax_amount` field descriptions in [Level II and Level III Processing Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/Level_2_3_SCMP_API/html/) 
     attr_accessor :type
 
-    # Indicates the amount of tax based on the `type` field as described in the table below:  | type      | type description | |-----------|--------------------| | `alternate` | Total amount of alternate tax for the order. | | `local`     | Sales tax for the order. | | `national`  | National tax for the order. | | `vat`       | Total amount of Value Added Tax (VAT) included in the order. | | `other`     | Other tax. |  For processor-specific details, see the `alternate_tax_amount`, `local_tax`, `national_tax`, `vat_tax_amount` or `other_tax#_amount` field descriptions in [Level II and Level III Processing Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/Level_2_3_SCMP_API/html/) 
+    # Indicates the amount of tax based on the `type` field as described in the table below:  | type      | type description | | ------------- |:-------------:| | `alternate` | Total amount of alternate tax for the order. | | `local`     | Sales tax for the order. | | `national`  | National tax for the order. | | `vat`       | Total amount of value added tax (VAT) included in the order. | | `other`     | Other tax. | 
     attr_accessor :amount
 
     # Rate of VAT or other tax for the order.  Example 0.040 (=4%)  Valid range: 0.01 to 0.99 (1% to 99%, with only whole percentage values accepted; values with additional decimal places will be truncated)  For processor-specific details, see the `alternate_tax_amount`, `vat_rate`, `vat_tax_rate`, `local_tax`, `national_tax`, `vat_tax_amount` or `other_tax#_rate` field descriptions in the [Level II and Level III Processing Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/Level_2_3_SCMP_API/html/) 

data/lib/cybersource_rest_client/models/invoicingv2invoices_order_information_line_items.rb

@@ -15,16 +15,16 @@ require 'date'
 module CyberSource
   # List of the line items from the order, which are included in an invoice.
   class Invoicingv2invoicesOrderInformationLineItems
-    # Stock Keeping Unit (SKU) code for the product.  For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when _orderInformation.lineItems[].productCode_ is not set to **default** or one of the other values that are related to shipping and/or handling. 
+    # Product identifier code. Also known as the Stock Keeping Unit (SKU) code for the product.  For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not set to **default** or one of the other values that are related to shipping and/or handling.  #### Tax Calculation Optional field for U.S. and Canadian taxes. Not applicable to international and value added taxes. For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not `default` or one of the values related to shipping and/or handling. 
     attr_accessor :product_sku
 
-    # For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not set to `default` or one of the other values that are related to shipping and/or handling. 
+    # For an authorization or capture transaction (`processingOptions.capture` is `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not `default` or one of the other values that are related to shipping and/or handling.  #### Tax Calculation Optional field for U.S., Canadian, international tax, and value added taxes. 
     attr_accessor :product_name
 
-    # Number of units for this order.  The default is `1`. For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when _orderInformation.lineItems[].productCode_ is not set to **default** or one of the other values that are related to shipping and/or handling.  When orderInformation.lineItems[].productCode is \"gift_card\", this is the total count of individual prepaid gift cards purchased. 
+    # Number of units for this order. Must be a non-negative integer.  The default is `1`. For an authorization or capture transaction (`processingOptions.capture` is set to `true` or `false`), this field is required when `orderInformation.lineItems[].productCode` is not `default` or one of the other values related to shipping and/or handling.  #### Tax Calculation Optional field for U.S., Canadian, international tax, and value added taxes. 
     attr_accessor :quantity
 
-    # Per-item price of the product. This value cannot be negative. You can include a decimal point (.), but you cannot include any other special characters. CyberSource truncates the amount to the correct number of decimal places.  For processor-specific information, see the `amount` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. See these guides for details: - [Merchant Descriptors Using the SCMP API Guide] (https://apps.cybersource.com/library/documentation/dev_guides/Merchant_Descriptors_SCMP_API/html/) - \"Capture Information for Specific Processors\" section in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either the 1st line item in the order and this field, or the request-level field `orderInformation.amountDetails.totalAmount` in your request. For details, see \"Dynamic Currency Conversion with a Third Party Provider\" in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in the [Merchant Descriptors Using the SCMP API Guide.] (https://apps.cybersource.com/library/documentation/dev_guides/Merchant_Descriptors_SCMP_API/html/)  #### Zero Amount Authorizations If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. See \"Zero Amount Authorizations\" in the [Credit Card Services Using the SCMP API Guide.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/) 
+    # Per-item price of the product. This value for this field cannot be negative.  You must include either this field or the request-level field `orderInformation.amountDetails.totalAmount` in your request.  You can include a decimal point (.), but you cannot include any other special characters. The value is truncated to the correct number of decimal places.  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either the 1st line item in the order and this field, or the request-level field `orderInformation.amountDetails.totalAmount` in your request.  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in the [Merchant Descriptors Using the SCMP API Guide.] (https://apps.cybersource.com/library/documentation/dev_guides/Merchant_Descriptors_SCMP_API/html/)  #### Tax Calculation Required field for U.S., Canadian, international and value added taxes.  #### Zero Amount Authorizations If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen.  #### Maximum Field Lengths For GPN and JCN Gateway: Decimal (10) All other processors: Decimal (15) 
     attr_accessor :unit_price
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/kmsv2keysasym_key_information.rb

@@ -0,0 +1,215 @@
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  # key information 
+  class Kmsv2keysasymKeyInformation
+    # Merchant Id 
+    attr_accessor :organization_id
+
+    # Reference number is a unique identifier provided by the client along with the organization Id. This is an optional field provided solely for the client’s convenience. If client specifies value for this field in the request, it is expected to be available in the response. 
+    attr_accessor :reference_number
+
+    # Certificate Signing Request(csr), one needs to use the contents of the csr created for the same organizationId. Please extract string from '\\n' and '-----BEGIN CERTIFICATE REQUEST-----','-----END CERTIFICATE REQUEST-----' 
+    attr_accessor :cert
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'organization_id' => :'organizationId',
+        :'reference_number' => :'referenceNumber',
+        :'cert' => :'cert'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'organization_id' => :'String',
+        :'reference_number' => :'String',
+        :'cert' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'organizationId')
+        self.organization_id = attributes[:'organizationId']
+      end
+
+      if attributes.has_key?(:'referenceNumber')
+        self.reference_number = attributes[:'referenceNumber']
+      end
+
+      if attributes.has_key?(:'cert')
+        self.cert = attributes[:'cert']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @organization_id.nil?
+        invalid_properties.push('invalid value for "organization_id", organization_id cannot be nil.')
+      end
+
+      if @cert.nil?
+        invalid_properties.push('invalid value for "cert", cert cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @organization_id.nil?
+      return false if @cert.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          organization_id == o.organization_id &&
+          reference_number == o.reference_number &&
+          cert == o.cert
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [organization_id, reference_number, cert].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end

data/lib/cybersource_rest_client/models/{tms_v1_instrument_identifiers_post200_response_card.rb → kmsv2keyssym_client_reference_information.rb}

@@ -13,21 +13,30 @@ Swagger Codegen version: 2.2.3
 require 'date'
 
 module CyberSource
-  class TmsV1InstrumentIdentifiersPost200ResponseCard
-    # Customer’s credit card number.
-    attr_accessor :number
+  class Kmsv2keyssymClientReferenceInformation
+    # Client-generated order reference or tracking number. CyberSource recommends that you send a unique value. 
+    attr_accessor :code
+
+    # Comments
+    attr_accessor :comments
+
+    attr_accessor :partner
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
-        :'number' => :'number'
+        :'code' => :'code',
+        :'comments' => :'comments',
+        :'partner' => :'partner'
       }
     end
 
     # Attribute type mapping.
     def self.swagger_types
       {
-        :'number' => :'String'
+        :'code' => :'String',
+        :'comments' => :'String',
+        :'partner' => :'Vasv2taxClientReferenceInformationPartner'
       }
     end
 
@@ -39,8 +48,16 @@ module CyberSource
       # convert string to symbol for hash key
       attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
 
-      if attributes.has_key?(:'number')
-        self.number = attributes[:'number']
+      if attributes.has_key?(:'code')
+        self.code = attributes[:'code']
+      end
+
+      if attributes.has_key?(:'comments')
+        self.comments = attributes[:'comments']
+      end
+
+      if attributes.has_key?(:'partner')
+        self.partner = attributes[:'partner']
       end
     end
 
@@ -48,12 +65,8 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@number.nil? && @number.to_s.length > 19
-        invalid_properties.push('invalid value for "number", the character length must be smaller than or equal to 19.')
-      end
-
-      if !@number.nil? && @number.to_s.length < 12
-        invalid_properties.push('invalid value for "number", the character length must be great than or equal to 12.')
+      if !@code.nil? && @code.to_s.length > 50
+        invalid_properties.push('invalid value for "code", the character length must be smaller than or equal to 50.')
       end
 
       invalid_properties
@@ -62,23 +75,18 @@ module CyberSource
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@number.nil? && @number.to_s.length > 19
-      return false if !@number.nil? && @number.to_s.length < 12
+      return false if !@code.nil? && @code.to_s.length > 50
       true
     end
 
     # Custom attribute writer method with validation
-    # @param [Object] number Value to be assigned
-    def number=(number)
-      if !number.nil? && number.to_s.length > 19
-        fail ArgumentError, 'invalid value for "number", the character length must be smaller than or equal to 19.'
-      end
-
-      if !number.nil? && number.to_s.length < 12
-        fail ArgumentError, 'invalid value for "number", the character length must be great than or equal to 12.'
+    # @param [Object] code Value to be assigned
+    def code=(code)
+      if !code.nil? && code.to_s.length > 50
+        fail ArgumentError, 'invalid value for "code", the character length must be smaller than or equal to 50.'
       end
 
-      @number = number
+      @code = code
     end
 
     # Checks equality by comparing each attribute.
@@ -86,7 +94,9 @@ module CyberSource
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          number == o.number
+          code == o.code &&
+          comments == o.comments &&
+          partner == o.partner
     end
 
     # @see the `==` method
@@ -98,7 +108,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [number].hash
+      [code, comments, partner].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/kmsv2keyssym_key_information.rb

@@ -0,0 +1,200 @@
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  # key information 
+  class Kmsv2keyssymKeyInformation
+    # Merchant Id 
+    attr_accessor :organization_id
+
+    # Reference number is a unique identifier provided by the client along with the organization Id. This is an optional field provided solely for the client’s convenience. If client specifies value for this field in the request, it is expected to be available in the response. 
+    attr_accessor :reference_number
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'organization_id' => :'organizationId',
+        :'reference_number' => :'referenceNumber'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'organization_id' => :'String',
+        :'reference_number' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'organizationId')
+        self.organization_id = attributes[:'organizationId']
+      end
+
+      if attributes.has_key?(:'referenceNumber')
+        self.reference_number = attributes[:'referenceNumber']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @organization_id.nil?
+        invalid_properties.push('invalid value for "organization_id", organization_id cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @organization_id.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          organization_id == o.organization_id &&
+          reference_number == o.reference_number
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [organization_id, reference_number].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end