cybersource_rest_client 0.0.17 → 0.0.25

data/lib/cybersource_rest_client/models/riskv1authentications_order_information_amount_details.rb

@@ -0,0 +1,243 @@
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  # Contains `currency` and `totalAmount` for this order.
+  class Riskv1authenticationsOrderInformationAmountDetails
+    # Currency used for the order. Use the three-character [ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  #### Used by **Authorization** Required field.  **Authorization Reversal** For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### PIN Debit Currency for the amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf). Returned by PIN debit purchase.  For PIN debit reversal requests, you must use the same currency that was used for the PIN debit purchase or PIN debit credit that you are reversing. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf).  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit.  #### DCC for First Data Your local currency. For details, see the `currency` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### Tax Calculation Required for international tax and value added tax only. Optional for U.S. and Canadian taxes. Your local currency. 
+    attr_accessor :currency
+
+    # Grand total for the order. This value cannot be negative. You can include a decimal point (.), but no other special characters. CyberSource truncates the amount to the correct number of decimal places.  **Note** For CTV, FDCCompass, Paymentech processors, the maximum length for this field is 12.  **Important** Some processors have specific requirements and limitations, such as maximum amounts and maximum field lengths. For details, see: - \"Authorization Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Capture Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/). - \"Credit Information for Specific Processors\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/).  If your processor supports zero amount authorizations, you can set this field to 0 for the authorization to check if the card is lost or stolen. For details, see \"Zero Amount Authorizations,\" \"Credit Information for Specific Processors\" in [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### Card Present Required to include either this field or `orderInformation.lineItems[].unitPrice` for the order.  #### Invoicing Required for creating a new invoice.  #### PIN Debit Amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount.  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit; however, for all other processors, these fields are required.  #### DCC with a Third-Party Provider Set this field to the converted amount that was returned by the DCC provider. You must include either this field or the 1st line item in the order and the specific line-order amount in your request. For details, see `grand_total_amount` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### FDMS South If you accept IDR or CLP currencies, see the entry for FDMS South in \"Authorization Information for Specific Processors\" of the [Credit Card Services Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  #### DCC for First Data Not used. 
+    attr_accessor :total_amount
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'currency' => :'currency',
+        :'total_amount' => :'totalAmount'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'currency' => :'String',
+        :'total_amount' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'currency')
+        self.currency = attributes[:'currency']
+      end
+
+      if attributes.has_key?(:'totalAmount')
+        self.total_amount = attributes[:'totalAmount']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @currency.nil?
+        invalid_properties.push('invalid value for "currency", currency cannot be nil.')
+      end
+
+      if @currency.to_s.length > 3
+        invalid_properties.push('invalid value for "currency", the character length must be smaller than or equal to 3.')
+      end
+
+      if @total_amount.nil?
+        invalid_properties.push('invalid value for "total_amount", total_amount cannot be nil.')
+      end
+
+      if @total_amount.to_s.length > 19
+        invalid_properties.push('invalid value for "total_amount", the character length must be smaller than or equal to 19.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @currency.nil?
+      return false if @currency.to_s.length > 3
+      return false if @total_amount.nil?
+      return false if @total_amount.to_s.length > 19
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] currency Value to be assigned
+    def currency=(currency)
+      if currency.nil?
+        fail ArgumentError, 'currency cannot be nil'
+      end
+
+      if currency.to_s.length > 3
+        fail ArgumentError, 'invalid value for "currency", the character length must be smaller than or equal to 3.'
+      end
+
+      @currency = currency
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] total_amount Value to be assigned
+    def total_amount=(total_amount)
+      if total_amount.nil?
+        fail ArgumentError, 'total_amount cannot be nil'
+      end
+
+      if total_amount.to_s.length > 19
+        fail ArgumentError, 'invalid value for "total_amount", the character length must be smaller than or equal to 19.'
+      end
+
+      @total_amount = total_amount
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          currency == o.currency &&
+          total_amount == o.total_amount
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [currency, total_amount].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end

data/lib/cybersource_rest_client/models/riskv1authentications_order_information_bill_to.rb

@@ -0,0 +1,487 @@
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class Riskv1authenticationsOrderInformationBillTo
+    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate orderInformation.billTo.address1 and orderInformation.billTo.address2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville When the street name is numeric, it must be sent in numeric format. For example, if the address is _One First Street_, it must be sent as _1 1st Street_.  Required if keyed; not used if swiped.  String (20)  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional. String (60)  #### For Payouts This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
+    attr_accessor :address1
+
+    # Used for additional address information. For example: _Attention: Accounts Payable_ Optional field.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate `orderInformation.billTo.address1` and `orderInformation.billTo.address2`, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### FDMS Nashville `orderInformation.billTo.address1` and `orderInformation.billTo.address2` together cannot exceed 20 characters. String (20)  #### All Other Processors String (60) 
+    attr_accessor :address2
+
+    # State or province of the billing address. Use the [State, Province, and Territory Codes for the United States and Canada](https://developer.cybersource.com/library/documentation/sbc/quickref/states_and_provinces.pdf).  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :administrative_area
+
+    # Payment card billing country. Use the two-character [ISO Standard Country Codes](http://apps.cybersource.com/library/documentation/sbc/quickref/countries_alpha_list.pdf).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :country
+
+    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :locality
+
+    # Customer’s first name. This name must be the same as the name on the card.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called _CyberSource Latin American Processing_. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :first_name
+
+    # Customer’s last name. This name must be the same as the name on the card.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### RBS WorldPay Atlanta Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :last_name
+
+    # Customer’s phone number.  It is recommended that you include the country code when the order is from outside the U.S.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Optional field.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :phone_number
+
+    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :email
+
+    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville Required if `pointOfSaleInformation.entryMode=keyed` and the address is in the U.S. or Canada. Optional if `pointOfSaleInformation.entryMode=keyed` and the address is **not** in the U.S. or Canada. Not used if swiped.  #### RBS WorldPay Atlanta: For best card-present keyed rates, send the postal code if `pointOfSaleInformation.entryMode=keyed`.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional field. 
+    attr_accessor :postal_code
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'address1' => :'address1',
+        :'address2' => :'address2',
+        :'administrative_area' => :'administrativeArea',
+        :'country' => :'country',
+        :'locality' => :'locality',
+        :'first_name' => :'firstName',
+        :'last_name' => :'lastName',
+        :'phone_number' => :'phoneNumber',
+        :'email' => :'email',
+        :'postal_code' => :'postalCode'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'address1' => :'String',
+        :'address2' => :'String',
+        :'administrative_area' => :'String',
+        :'country' => :'String',
+        :'locality' => :'String',
+        :'first_name' => :'String',
+        :'last_name' => :'String',
+        :'phone_number' => :'String',
+        :'email' => :'String',
+        :'postal_code' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'address1')
+        self.address1 = attributes[:'address1']
+      end
+
+      if attributes.has_key?(:'address2')
+        self.address2 = attributes[:'address2']
+      end
+
+      if attributes.has_key?(:'administrativeArea')
+        self.administrative_area = attributes[:'administrativeArea']
+      end
+
+      if attributes.has_key?(:'country')
+        self.country = attributes[:'country']
+      end
+
+      if attributes.has_key?(:'locality')
+        self.locality = attributes[:'locality']
+      end
+
+      if attributes.has_key?(:'firstName')
+        self.first_name = attributes[:'firstName']
+      end
+
+      if attributes.has_key?(:'lastName')
+        self.last_name = attributes[:'lastName']
+      end
+
+      if attributes.has_key?(:'phoneNumber')
+        self.phone_number = attributes[:'phoneNumber']
+      end
+
+      if attributes.has_key?(:'email')
+        self.email = attributes[:'email']
+      end
+
+      if attributes.has_key?(:'postalCode')
+        self.postal_code = attributes[:'postalCode']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @address1.nil?
+        invalid_properties.push('invalid value for "address1", address1 cannot be nil.')
+      end
+
+      if @address1.to_s.length > 60
+        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@address2.nil? && @address2.to_s.length > 60
+        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 60.')
+      end
+
+      if @administrative_area.nil?
+        invalid_properties.push('invalid value for "administrative_area", administrative_area cannot be nil.')
+      end
+
+      if @administrative_area.to_s.length > 20
+        invalid_properties.push('invalid value for "administrative_area", the character length must be smaller than or equal to 20.')
+      end
+
+      if @country.nil?
+        invalid_properties.push('invalid value for "country", country cannot be nil.')
+      end
+
+      if @country.to_s.length > 2
+        invalid_properties.push('invalid value for "country", the character length must be smaller than or equal to 2.')
+      end
+
+      if !@locality.nil? && @locality.to_s.length > 50
+        invalid_properties.push('invalid value for "locality", the character length must be smaller than or equal to 50.')
+      end
+
+      if @first_name.nil?
+        invalid_properties.push('invalid value for "first_name", first_name cannot be nil.')
+      end
+
+      if @first_name.to_s.length > 60
+        invalid_properties.push('invalid value for "first_name", the character length must be smaller than or equal to 60.')
+      end
+
+      if @last_name.nil?
+        invalid_properties.push('invalid value for "last_name", last_name cannot be nil.')
+      end
+
+      if @last_name.to_s.length > 60
+        invalid_properties.push('invalid value for "last_name", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@phone_number.nil? && @phone_number.to_s.length > 15
+        invalid_properties.push('invalid value for "phone_number", the character length must be smaller than or equal to 15.')
+      end
+
+      if @email.nil?
+        invalid_properties.push('invalid value for "email", email cannot be nil.')
+      end
+
+      if @email.to_s.length > 255
+        invalid_properties.push('invalid value for "email", the character length must be smaller than or equal to 255.')
+      end
+
+      if @postal_code.nil?
+        invalid_properties.push('invalid value for "postal_code", postal_code cannot be nil.')
+      end
+
+      if @postal_code.to_s.length > 10
+        invalid_properties.push('invalid value for "postal_code", the character length must be smaller than or equal to 10.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @address1.nil?
+      return false if @address1.to_s.length > 60
+      return false if !@address2.nil? && @address2.to_s.length > 60
+      return false if @administrative_area.nil?
+      return false if @administrative_area.to_s.length > 20
+      return false if @country.nil?
+      return false if @country.to_s.length > 2
+      return false if !@locality.nil? && @locality.to_s.length > 50
+      return false if @first_name.nil?
+      return false if @first_name.to_s.length > 60
+      return false if @last_name.nil?
+      return false if @last_name.to_s.length > 60
+      return false if !@phone_number.nil? && @phone_number.to_s.length > 15
+      return false if @email.nil?
+      return false if @email.to_s.length > 255
+      return false if @postal_code.nil?
+      return false if @postal_code.to_s.length > 10
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address1 Value to be assigned
+    def address1=(address1)
+      if address1.nil?
+        fail ArgumentError, 'address1 cannot be nil'
+      end
+
+      if address1.to_s.length > 60
+        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 60.'
+      end
+
+      @address1 = address1
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address2 Value to be assigned
+    def address2=(address2)
+      if !address2.nil? && address2.to_s.length > 60
+        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 60.'
+      end
+
+      @address2 = address2
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] administrative_area Value to be assigned
+    def administrative_area=(administrative_area)
+      if administrative_area.nil?
+        fail ArgumentError, 'administrative_area cannot be nil'
+      end
+
+      if administrative_area.to_s.length > 20
+        fail ArgumentError, 'invalid value for "administrative_area", the character length must be smaller than or equal to 20.'
+      end
+
+      @administrative_area = administrative_area
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] country Value to be assigned
+    def country=(country)
+      if country.nil?
+        fail ArgumentError, 'country cannot be nil'
+      end
+
+      if country.to_s.length > 2
+        fail ArgumentError, 'invalid value for "country", the character length must be smaller than or equal to 2.'
+      end
+
+      @country = country
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] locality Value to be assigned
+    def locality=(locality)
+      if !locality.nil? && locality.to_s.length > 50
+        fail ArgumentError, 'invalid value for "locality", the character length must be smaller than or equal to 50.'
+      end
+
+      @locality = locality
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] first_name Value to be assigned
+    def first_name=(first_name)
+      if first_name.nil?
+        fail ArgumentError, 'first_name cannot be nil'
+      end
+
+      if first_name.to_s.length > 60
+        fail ArgumentError, 'invalid value for "first_name", the character length must be smaller than or equal to 60.'
+      end
+
+      @first_name = first_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] last_name Value to be assigned
+    def last_name=(last_name)
+      if last_name.nil?
+        fail ArgumentError, 'last_name cannot be nil'
+      end
+
+      if last_name.to_s.length > 60
+        fail ArgumentError, 'invalid value for "last_name", the character length must be smaller than or equal to 60.'
+      end
+
+      @last_name = last_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] phone_number Value to be assigned
+    def phone_number=(phone_number)
+      if !phone_number.nil? && phone_number.to_s.length > 15
+        fail ArgumentError, 'invalid value for "phone_number", the character length must be smaller than or equal to 15.'
+      end
+
+      @phone_number = phone_number
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] email Value to be assigned
+    def email=(email)
+      if email.nil?
+        fail ArgumentError, 'email cannot be nil'
+      end
+
+      if email.to_s.length > 255
+        fail ArgumentError, 'invalid value for "email", the character length must be smaller than or equal to 255.'
+      end
+
+      @email = email
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] postal_code Value to be assigned
+    def postal_code=(postal_code)
+      if postal_code.nil?
+        fail ArgumentError, 'postal_code cannot be nil'
+      end
+
+      if postal_code.to_s.length > 10
+        fail ArgumentError, 'invalid value for "postal_code", the character length must be smaller than or equal to 10.'
+      end
+
+      @postal_code = postal_code
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          address1 == o.address1 &&
+          address2 == o.address2 &&
+          administrative_area == o.administrative_area &&
+          country == o.country &&
+          locality == o.locality &&
+          first_name == o.first_name &&
+          last_name == o.last_name &&
+          phone_number == o.phone_number &&
+          email == o.email &&
+          postal_code == o.postal_code
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [address1, address2, administrative_area, country, locality, first_name, last_name, phone_number, email, postal_code].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end