cybersource_rest_client 0.0.17 → 0.0.25

data/lib/cybersource_rest_client/models/ptsv2payments_order_information_bill_to.rb

@@ -1,634 +1,643 @@
-=begin
-#CyberSource Merged Spec
-
-#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
-
-OpenAPI spec version: 0.0.1
-
-Generated by: https://github.com/swagger-api/swagger-codegen.git
-Swagger Codegen version: 2.2.3
-
-=end
-
-require 'date'
-
-module CyberSource
-  class Ptsv2paymentsOrderInformationBillTo
-    # Customer’s first name. This name must be the same as the name on the card.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called _CyberSource Latin American Processing_. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_firstname` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :first_name
-
-    # Customer’s last name. This name must be the same as the name on the card.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the `customer_lastname` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :last_name
-
-    # Customer’s middle name. 
-    attr_accessor :middle_name
-
-    # Customer’s name suffix. 
-    attr_accessor :name_suffix
-
-    # Title. 
-    attr_accessor :title
-
-    # Name of the customer’s company.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks. For processor-specific information, see the company_name field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :company
-
-    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_address1` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :address1
-
-    # Additional address information.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### CyberSource through VisaNet **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the `bill_address2` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :address2
-
-    # Additional address information (third line of the billing address) 
-    attr_accessor :address3
-
-    # Additional address information (fourth line of the billing address) 
-    attr_accessor :address4
-
-    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the `bill_city` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :locality
-
-    # State or province of the billing address. Use the State, Province, and Territory Codes for the United States and Canada.  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_state` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :administrative_area
-
-    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the `bill_zip` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :postal_code
-
-    # Payment card billing country. Use the two-character ISO Standard Country Codes.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_country` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
-    attr_accessor :country
-
-    # Customer’s neighborhood, community, or region (a barrio in Brazil) within the city or municipality. This field is available only on **Cielo**. 
-    attr_accessor :district
-
-    # Building number in the street address.  For example, if the street address is: Rua da Quitanda 187 then the building number is 187.  This field is supported only for:  - Cielo transactions.  - Redecard customer validation with CyberSource Latin American Processing. 
-    attr_accessor :building_number
-
-    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link. 
-    attr_accessor :email
-
-    # Customer’s phone number.  #### For Payouts: This field may be sent only for FDC Compass.  CyberSource recommends that you include the country code when the order is from outside the U.S.  For processor-specific information, see the customer_phone field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks. 
-    attr_accessor :phone_number
-
-    # Customer's phone number type.  #### For Payouts: This field may be sent only for FDC Compass.  Possible Values: * day * home * night * work 
-    attr_accessor :phone_type
-
-    # Attribute mapping from ruby-style variable name to JSON key.
-    def self.attribute_map
-      {
-        :'first_name' => :'firstName',
-        :'last_name' => :'lastName',
-        :'middle_name' => :'middleName',
-        :'name_suffix' => :'nameSuffix',
-        :'title' => :'title',
-        :'company' => :'company',
-        :'address1' => :'address1',
-        :'address2' => :'address2',
-        :'address3' => :'address3',
-        :'address4' => :'address4',
-        :'locality' => :'locality',
-        :'administrative_area' => :'administrativeArea',
-        :'postal_code' => :'postalCode',
-        :'country' => :'country',
-        :'district' => :'district',
-        :'building_number' => :'buildingNumber',
-        :'email' => :'email',
-        :'phone_number' => :'phoneNumber',
-        :'phone_type' => :'phoneType'
-      }
-    end
-
-    # Attribute type mapping.
-    def self.swagger_types
-      {
-        :'first_name' => :'String',
-        :'last_name' => :'String',
-        :'middle_name' => :'String',
-        :'name_suffix' => :'String',
-        :'title' => :'String',
-        :'company' => :'String',
-        :'address1' => :'String',
-        :'address2' => :'String',
-        :'address3' => :'String',
-        :'address4' => :'String',
-        :'locality' => :'String',
-        :'administrative_area' => :'String',
-        :'postal_code' => :'String',
-        :'country' => :'String',
-        :'district' => :'String',
-        :'building_number' => :'String',
-        :'email' => :'String',
-        :'phone_number' => :'String',
-        :'phone_type' => :'String'
-      }
-    end
-
-    # Initializes the object
-    # @param [Hash] attributes Model attributes in the form of hash
-    def initialize(attributes = {})
-      return unless attributes.is_a?(Hash)
-
-      # convert string to symbol for hash key
-      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
-
-      if attributes.has_key?(:'firstName')
-        self.first_name = attributes[:'firstName']
-      end
-
-      if attributes.has_key?(:'lastName')
-        self.last_name = attributes[:'lastName']
-      end
-
-      if attributes.has_key?(:'middleName')
-        self.middle_name = attributes[:'middleName']
-      end
-
-      if attributes.has_key?(:'nameSuffix')
-        self.name_suffix = attributes[:'nameSuffix']
-      end
-
-      if attributes.has_key?(:'title')
-        self.title = attributes[:'title']
-      end
-
-      if attributes.has_key?(:'company')
-        self.company = attributes[:'company']
-      end
-
-      if attributes.has_key?(:'address1')
-        self.address1 = attributes[:'address1']
-      end
-
-      if attributes.has_key?(:'address2')
-        self.address2 = attributes[:'address2']
-      end
-
-      if attributes.has_key?(:'address3')
-        self.address3 = attributes[:'address3']
-      end
-
-      if attributes.has_key?(:'address4')
-        self.address4 = attributes[:'address4']
-      end
-
-      if attributes.has_key?(:'locality')
-        self.locality = attributes[:'locality']
-      end
-
-      if attributes.has_key?(:'administrativeArea')
-        self.administrative_area = attributes[:'administrativeArea']
-      end
-
-      if attributes.has_key?(:'postalCode')
-        self.postal_code = attributes[:'postalCode']
-      end
-
-      if attributes.has_key?(:'country')
-        self.country = attributes[:'country']
-      end
-
-      if attributes.has_key?(:'district')
-        self.district = attributes[:'district']
-      end
-
-      if attributes.has_key?(:'buildingNumber')
-        self.building_number = attributes[:'buildingNumber']
-      end
-
-      if attributes.has_key?(:'email')
-        self.email = attributes[:'email']
-      end
-
-      if attributes.has_key?(:'phoneNumber')
-        self.phone_number = attributes[:'phoneNumber']
-      end
-
-      if attributes.has_key?(:'phoneType')
-        self.phone_type = attributes[:'phoneType']
-      end
-    end
-
-    # Show invalid properties with the reasons. Usually used together with valid?
-    # @return Array for valid properties with the reasons
-    def list_invalid_properties
-      invalid_properties = Array.new
-      if !@first_name.nil? && @first_name.to_s.length > 60
-        invalid_properties.push('invalid value for "first_name", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@last_name.nil? && @last_name.to_s.length > 60
-        invalid_properties.push('invalid value for "last_name", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@middle_name.nil? && @middle_name.to_s.length > 60
-        invalid_properties.push('invalid value for "middle_name", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@name_suffix.nil? && @name_suffix.to_s.length > 60
-        invalid_properties.push('invalid value for "name_suffix", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@title.nil? && @title.to_s.length > 60
-        invalid_properties.push('invalid value for "title", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@company.nil? && @company.to_s.length > 60
-        invalid_properties.push('invalid value for "company", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address1.nil? && @address1.to_s.length > 60
-        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address2.nil? && @address2.to_s.length > 60
-        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address3.nil? && @address3.to_s.length > 60
-        invalid_properties.push('invalid value for "address3", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address4.nil? && @address4.to_s.length > 60
-        invalid_properties.push('invalid value for "address4", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@locality.nil? && @locality.to_s.length > 50
-        invalid_properties.push('invalid value for "locality", the character length must be smaller than or equal to 50.')
-      end
-
-      if !@administrative_area.nil? && @administrative_area.to_s.length > 20
-        invalid_properties.push('invalid value for "administrative_area", the character length must be smaller than or equal to 20.')
-      end
-
-      if !@postal_code.nil? && @postal_code.to_s.length > 10
-        invalid_properties.push('invalid value for "postal_code", the character length must be smaller than or equal to 10.')
-      end
-
-      if !@country.nil? && @country.to_s.length > 2
-        invalid_properties.push('invalid value for "country", the character length must be smaller than or equal to 2.')
-      end
-
-      if !@district.nil? && @district.to_s.length > 50
-        invalid_properties.push('invalid value for "district", the character length must be smaller than or equal to 50.')
-      end
-
-      if !@building_number.nil? && @building_number.to_s.length > 256
-        invalid_properties.push('invalid value for "building_number", the character length must be smaller than or equal to 256.')
-      end
-
-      if !@email.nil? && @email.to_s.length > 255
-        invalid_properties.push('invalid value for "email", the character length must be smaller than or equal to 255.')
-      end
-
-      if !@phone_number.nil? && @phone_number.to_s.length > 15
-        invalid_properties.push('invalid value for "phone_number", the character length must be smaller than or equal to 15.')
-      end
-
-      invalid_properties
-    end
-
-    # Check to see if the all the properties in the model are valid
-    # @return true if the model is valid
-    def valid?
-      return false if !@first_name.nil? && @first_name.to_s.length > 60
-      return false if !@last_name.nil? && @last_name.to_s.length > 60
-      return false if !@middle_name.nil? && @middle_name.to_s.length > 60
-      return false if !@name_suffix.nil? && @name_suffix.to_s.length > 60
-      return false if !@title.nil? && @title.to_s.length > 60
-      return false if !@company.nil? && @company.to_s.length > 60
-      return false if !@address1.nil? && @address1.to_s.length > 60
-      return false if !@address2.nil? && @address2.to_s.length > 60
-      return false if !@address3.nil? && @address3.to_s.length > 60
-      return false if !@address4.nil? && @address4.to_s.length > 60
-      return false if !@locality.nil? && @locality.to_s.length > 50
-      return false if !@administrative_area.nil? && @administrative_area.to_s.length > 20
-      return false if !@postal_code.nil? && @postal_code.to_s.length > 10
-      return false if !@country.nil? && @country.to_s.length > 2
-      return false if !@district.nil? && @district.to_s.length > 50
-      return false if !@building_number.nil? && @building_number.to_s.length > 256
-      return false if !@email.nil? && @email.to_s.length > 255
-      return false if !@phone_number.nil? && @phone_number.to_s.length > 15
-      true
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] first_name Value to be assigned
-    def first_name=(first_name)
-      if !first_name.nil? && first_name.to_s.length > 60
-        fail ArgumentError, 'invalid value for "first_name", the character length must be smaller than or equal to 60.'
-      end
-
-      @first_name = first_name
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] last_name Value to be assigned
-    def last_name=(last_name)
-      if !last_name.nil? && last_name.to_s.length > 60
-        fail ArgumentError, 'invalid value for "last_name", the character length must be smaller than or equal to 60.'
-      end
-
-      @last_name = last_name
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] middle_name Value to be assigned
-    def middle_name=(middle_name)
-      if !middle_name.nil? && middle_name.to_s.length > 60
-        fail ArgumentError, 'invalid value for "middle_name", the character length must be smaller than or equal to 60.'
-      end
-
-      @middle_name = middle_name
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] name_suffix Value to be assigned
-    def name_suffix=(name_suffix)
-      if !name_suffix.nil? && name_suffix.to_s.length > 60
-        fail ArgumentError, 'invalid value for "name_suffix", the character length must be smaller than or equal to 60.'
-      end
-
-      @name_suffix = name_suffix
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] title Value to be assigned
-    def title=(title)
-      if !title.nil? && title.to_s.length > 60
-        fail ArgumentError, 'invalid value for "title", the character length must be smaller than or equal to 60.'
-      end
-
-      @title = title
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] company Value to be assigned
-    def company=(company)
-      if !company.nil? && company.to_s.length > 60
-        fail ArgumentError, 'invalid value for "company", the character length must be smaller than or equal to 60.'
-      end
-
-      @company = company
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] address1 Value to be assigned
-    def address1=(address1)
-      if !address1.nil? && address1.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 60.'
-      end
-
-      @address1 = address1
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] address2 Value to be assigned
-    def address2=(address2)
-      if !address2.nil? && address2.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 60.'
-      end
-
-      @address2 = address2
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] address3 Value to be assigned
-    def address3=(address3)
-      if !address3.nil? && address3.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address3", the character length must be smaller than or equal to 60.'
-      end
-
-      @address3 = address3
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] address4 Value to be assigned
-    def address4=(address4)
-      if !address4.nil? && address4.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address4", the character length must be smaller than or equal to 60.'
-      end
-
-      @address4 = address4
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] locality Value to be assigned
-    def locality=(locality)
-      if !locality.nil? && locality.to_s.length > 50
-        fail ArgumentError, 'invalid value for "locality", the character length must be smaller than or equal to 50.'
-      end
-
-      @locality = locality
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] administrative_area Value to be assigned
-    def administrative_area=(administrative_area)
-      if !administrative_area.nil? && administrative_area.to_s.length > 20
-        fail ArgumentError, 'invalid value for "administrative_area", the character length must be smaller than or equal to 20.'
-      end
-
-      @administrative_area = administrative_area
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] postal_code Value to be assigned
-    def postal_code=(postal_code)
-      if !postal_code.nil? && postal_code.to_s.length > 10
-        fail ArgumentError, 'invalid value for "postal_code", the character length must be smaller than or equal to 10.'
-      end
-
-      @postal_code = postal_code
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] country Value to be assigned
-    def country=(country)
-      if !country.nil? && country.to_s.length > 2
-        fail ArgumentError, 'invalid value for "country", the character length must be smaller than or equal to 2.'
-      end
-
-      @country = country
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] district Value to be assigned
-    def district=(district)
-      if !district.nil? && district.to_s.length > 50
-        fail ArgumentError, 'invalid value for "district", the character length must be smaller than or equal to 50.'
-      end
-
-      @district = district
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] building_number Value to be assigned
-    def building_number=(building_number)
-      if !building_number.nil? && building_number.to_s.length > 256
-        fail ArgumentError, 'invalid value for "building_number", the character length must be smaller than or equal to 256.'
-      end
-
-      @building_number = building_number
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] email Value to be assigned
-    def email=(email)
-      if !email.nil? && email.to_s.length > 255
-        fail ArgumentError, 'invalid value for "email", the character length must be smaller than or equal to 255.'
-      end
-
-      @email = email
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] phone_number Value to be assigned
-    def phone_number=(phone_number)
-      if !phone_number.nil? && phone_number.to_s.length > 15
-        fail ArgumentError, 'invalid value for "phone_number", the character length must be smaller than or equal to 15.'
-      end
-
-      @phone_number = phone_number
-    end
-
-    # Checks equality by comparing each attribute.
-    # @param [Object] Object to be compared
-    def ==(o)
-      return true if self.equal?(o)
-      self.class == o.class &&
-          first_name == o.first_name &&
-          last_name == o.last_name &&
-          middle_name == o.middle_name &&
-          name_suffix == o.name_suffix &&
-          title == o.title &&
-          company == o.company &&
-          address1 == o.address1 &&
-          address2 == o.address2 &&
-          address3 == o.address3 &&
-          address4 == o.address4 &&
-          locality == o.locality &&
-          administrative_area == o.administrative_area &&
-          postal_code == o.postal_code &&
-          country == o.country &&
-          district == o.district &&
-          building_number == o.building_number &&
-          email == o.email &&
-          phone_number == o.phone_number &&
-          phone_type == o.phone_type
-    end
-
-    # @see the `==` method
-    # @param [Object] Object to be compared
-    def eql?(o)
-      self == o
-    end
-
-    # Calculates hash code according to all attributes.
-    # @return [Fixnum] Hash code
-    def hash
-      [first_name, last_name, middle_name, name_suffix, title, company, address1, address2, address3, address4, locality, administrative_area, postal_code, country, district, building_number, email, phone_number, phone_type].hash
-    end
-
-    # Builds the object from hash
-    # @param [Hash] attributes Model attributes in the form of hash
-    # @return [Object] Returns the model itself
-    def build_from_hash(attributes)
-      return nil unless attributes.is_a?(Hash)
-      self.class.swagger_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
-          # check to ensure the input is an array given that the the attribute
-          # is documented as an array but the input is not
-          if attributes[self.class.attribute_map[key]].is_a?(Array)
-            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
-          end
-        elsif !attributes[self.class.attribute_map[key]].nil?
-          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
-      end
-
-      self
-    end
-
-    # Deserializes the data based on type
-    # @param string type Data type
-    # @param string value Value to be deserialized
-    # @return [Object] Deserialized data
-    def _deserialize(type, value)
-      case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
-      when :Date
-        Date.parse(value)
-      when :String
-        value.to_s
-      when :Integer
-        value.to_i
-      when :Float
-        value.to_f
-      when :BOOLEAN
-        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
-          true
-        else
-          false
-        end
-      when :Object
-        # generic object (usually a Hash), return directly
-        value
-      when /\AArray<(?<inner_type>.+)>\z/
-        inner_type = Regexp.last_match[:inner_type]
-        value.map { |v| _deserialize(inner_type, v) }
-      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
-        k_type = Regexp.last_match[:k_type]
-        v_type = Regexp.last_match[:v_type]
-        {}.tap do |hash|
-          value.each do |k, v|
-            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
-          end
-        end
-      else # model
-        temp_model = CyberSource.const_get(type).new
-        temp_model.build_from_hash(value)
-      end
-    end
-
-    # Returns the string representation of the object
-    # @return [String] String presentation of the object
-    def to_s
-      to_hash.to_s
-    end
-
-    # to_body is an alias to to_hash (backward compatibility)
-    # @return [Hash] Returns the object in the form of hash
-    def to_body
-      to_hash
-    end
-
-    # Returns the object in the form of hash
-    # @return [Hash] Returns the object in the form of hash
-    def to_hash
-      hash = {}
-      self.class.attribute_map.each_pair do |attr, param|
-        value = self.send(attr)
-        next if value.nil?
-        hash[param] = _to_hash(value)
-      end
-      hash
-    end
-
-    # Outputs non-array value in the form of hash
-    # For object, use to_hash. Otherwise, just return the value
-    # @param [Object] value Any valid value
-    # @return [Hash] Returns the value in the form of hash
-    def _to_hash(value)
-      if value.is_a?(Array)
-        value.compact.map { |v| _to_hash(v) }
-      elsif value.is_a?(Hash)
-        {}.tap do |hash|
-          value.each { |k, v| hash[k] = _to_hash(v) }
-        end
-      elsif value.respond_to? :to_hash
-        value.to_hash
-      else
-        value
-      end
-    end
-  end
-end
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class Ptsv2paymentsOrderInformationBillTo
+    # Customer’s first name. This name must be the same as the name on the card.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called _CyberSource Latin American Processing_. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :first_name
+
+    # Customer’s last name. This name must be the same as the name on the card.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### RBS WorldPay Atlanta Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :last_name
+
+    # Customer’s middle name. 
+    attr_accessor :middle_name
+
+    # Customer’s name suffix. 
+    attr_accessor :name_suffix
+
+    # Title. 
+    attr_accessor :title
+
+    attr_accessor :company
+
+    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate orderInformation.billTo.address1 and orderInformation.billTo.address2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville When the street name is numeric, it must be sent in numeric format. For example, if the address is _One First Street_, it must be sent as _1 1st Street_.  Required if keyed; not used if swiped.  String (20)  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional. String (60)  #### For Payouts This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
+    attr_accessor :address1
+
+    # Used for additional address information. For example: _Attention: Accounts Payable_ Optional field.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate `orderInformation.billTo.address1` and `orderInformation.billTo.address2`, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### FDMS Nashville `orderInformation.billTo.address1` and `orderInformation.billTo.address2` together cannot exceed 20 characters. String (20)  #### All Other Processors String (60) 
+    attr_accessor :address2
+
+    # Additional address information (third line of the billing address) 
+    attr_accessor :address3
+
+    # Additional address information (fourth line of the billing address) 
+    attr_accessor :address4
+
+    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :locality
+
+    # State or province of the billing address. Use the [State, Province, and Territory Codes for the United States and Canada](https://developer.cybersource.com/library/documentation/sbc/quickref/states_and_provinces.pdf).  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :administrative_area
+
+    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville Required if `pointOfSaleInformation.entryMode=keyed` and the address is in the U.S. or Canada. Optional if `pointOfSaleInformation.entryMode=keyed` and the address is **not** in the U.S. or Canada. Not used if swiped.  #### RBS WorldPay Atlanta: For best card-present keyed rates, send the postal code if `pointOfSaleInformation.entryMode=keyed`.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional field. 
+    attr_accessor :postal_code
+
+    # Payment card billing country. Use the two-character [ISO Standard Country Codes](http://apps.cybersource.com/library/documentation/sbc/quickref/countries_alpha_list.pdf).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :country
+
+    # Customer’s neighborhood, community, or region (a barrio in Brazil) within the city or municipality. This field is available only on **Cielo**. 
+    attr_accessor :district
+
+    # Building number in the street address.  For example, if the street address is: Rua da Quitanda 187 then the building number is 187.  This field is supported only for:  - Cielo transactions.  - Redecard customer validation with CyberSource Latin American Processing. 
+    attr_accessor :building_number
+
+    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :email
+
+    # Email domain of the customer. The domain of the email address comprises all characters that follow the @ symbol, such as mail.example.com. For the Risk Update service, if the email address and the domain are sent in the request, the domain supersedes the email address. 
+    attr_accessor :email_domain
+
+    # Customer’s phone number.  It is recommended that you include the country code when the order is from outside the U.S.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Optional field.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
+    attr_accessor :phone_number
+
+    # Customer's phone number type.  #### For Payouts: This field may be sent only for FDC Compass.  Possible Values: * day * home * night * work 
+    attr_accessor :phone_type
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'first_name' => :'firstName',
+        :'last_name' => :'lastName',
+        :'middle_name' => :'middleName',
+        :'name_suffix' => :'nameSuffix',
+        :'title' => :'title',
+        :'company' => :'company',
+        :'address1' => :'address1',
+        :'address2' => :'address2',
+        :'address3' => :'address3',
+        :'address4' => :'address4',
+        :'locality' => :'locality',
+        :'administrative_area' => :'administrativeArea',
+        :'postal_code' => :'postalCode',
+        :'country' => :'country',
+        :'district' => :'district',
+        :'building_number' => :'buildingNumber',
+        :'email' => :'email',
+        :'email_domain' => :'emailDomain',
+        :'phone_number' => :'phoneNumber',
+        :'phone_type' => :'phoneType'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'first_name' => :'String',
+        :'last_name' => :'String',
+        :'middle_name' => :'String',
+        :'name_suffix' => :'String',
+        :'title' => :'String',
+        :'company' => :'Ptsv2paymentsOrderInformationBillToCompany',
+        :'address1' => :'String',
+        :'address2' => :'String',
+        :'address3' => :'String',
+        :'address4' => :'String',
+        :'locality' => :'String',
+        :'administrative_area' => :'String',
+        :'postal_code' => :'String',
+        :'country' => :'String',
+        :'district' => :'String',
+        :'building_number' => :'String',
+        :'email' => :'String',
+        :'email_domain' => :'String',
+        :'phone_number' => :'String',
+        :'phone_type' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'firstName')
+        self.first_name = attributes[:'firstName']
+      end
+
+      if attributes.has_key?(:'lastName')
+        self.last_name = attributes[:'lastName']
+      end
+
+      if attributes.has_key?(:'middleName')
+        self.middle_name = attributes[:'middleName']
+      end
+
+      if attributes.has_key?(:'nameSuffix')
+        self.name_suffix = attributes[:'nameSuffix']
+      end
+
+      if attributes.has_key?(:'title')
+        self.title = attributes[:'title']
+      end
+
+      if attributes.has_key?(:'company')
+        self.company = attributes[:'company']
+      end
+
+      if attributes.has_key?(:'address1')
+        self.address1 = attributes[:'address1']
+      end
+
+      if attributes.has_key?(:'address2')
+        self.address2 = attributes[:'address2']
+      end
+
+      if attributes.has_key?(:'address3')
+        self.address3 = attributes[:'address3']
+      end
+
+      if attributes.has_key?(:'address4')
+        self.address4 = attributes[:'address4']
+      end
+
+      if attributes.has_key?(:'locality')
+        self.locality = attributes[:'locality']
+      end
+
+      if attributes.has_key?(:'administrativeArea')
+        self.administrative_area = attributes[:'administrativeArea']
+      end
+
+      if attributes.has_key?(:'postalCode')
+        self.postal_code = attributes[:'postalCode']
+      end
+
+      if attributes.has_key?(:'country')
+        self.country = attributes[:'country']
+      end
+
+      if attributes.has_key?(:'district')
+        self.district = attributes[:'district']
+      end
+
+      if attributes.has_key?(:'buildingNumber')
+        self.building_number = attributes[:'buildingNumber']
+      end
+
+      if attributes.has_key?(:'email')
+        self.email = attributes[:'email']
+      end
+
+      if attributes.has_key?(:'emailDomain')
+        self.email_domain = attributes[:'emailDomain']
+      end
+
+      if attributes.has_key?(:'phoneNumber')
+        self.phone_number = attributes[:'phoneNumber']
+      end
+
+      if attributes.has_key?(:'phoneType')
+        self.phone_type = attributes[:'phoneType']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if !@first_name.nil? && @first_name.to_s.length > 60
+        invalid_properties.push('invalid value for "first_name", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@last_name.nil? && @last_name.to_s.length > 60
+        invalid_properties.push('invalid value for "last_name", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@middle_name.nil? && @middle_name.to_s.length > 60
+        invalid_properties.push('invalid value for "middle_name", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@name_suffix.nil? && @name_suffix.to_s.length > 60
+        invalid_properties.push('invalid value for "name_suffix", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@title.nil? && @title.to_s.length > 60
+        invalid_properties.push('invalid value for "title", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@address1.nil? && @address1.to_s.length > 60
+        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@address2.nil? && @address2.to_s.length > 60
+        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@address3.nil? && @address3.to_s.length > 60
+        invalid_properties.push('invalid value for "address3", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@address4.nil? && @address4.to_s.length > 60
+        invalid_properties.push('invalid value for "address4", the character length must be smaller than or equal to 60.')
+      end
+
+      if !@locality.nil? && @locality.to_s.length > 50
+        invalid_properties.push('invalid value for "locality", the character length must be smaller than or equal to 50.')
+      end
+
+      if !@administrative_area.nil? && @administrative_area.to_s.length > 20
+        invalid_properties.push('invalid value for "administrative_area", the character length must be smaller than or equal to 20.')
+      end
+
+      if !@postal_code.nil? && @postal_code.to_s.length > 10
+        invalid_properties.push('invalid value for "postal_code", the character length must be smaller than or equal to 10.')
+      end
+
+      if !@country.nil? && @country.to_s.length > 2
+        invalid_properties.push('invalid value for "country", the character length must be smaller than or equal to 2.')
+      end
+
+      if !@district.nil? && @district.to_s.length > 50
+        invalid_properties.push('invalid value for "district", the character length must be smaller than or equal to 50.')
+      end
+
+      if !@building_number.nil? && @building_number.to_s.length > 256
+        invalid_properties.push('invalid value for "building_number", the character length must be smaller than or equal to 256.')
+      end
+
+      if !@email.nil? && @email.to_s.length > 255
+        invalid_properties.push('invalid value for "email", the character length must be smaller than or equal to 255.')
+      end
+
+      if !@email_domain.nil? && @email_domain.to_s.length > 100
+        invalid_properties.push('invalid value for "email_domain", the character length must be smaller than or equal to 100.')
+      end
+
+      if !@phone_number.nil? && @phone_number.to_s.length > 15
+        invalid_properties.push('invalid value for "phone_number", the character length must be smaller than or equal to 15.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if !@first_name.nil? && @first_name.to_s.length > 60
+      return false if !@last_name.nil? && @last_name.to_s.length > 60
+      return false if !@middle_name.nil? && @middle_name.to_s.length > 60
+      return false if !@name_suffix.nil? && @name_suffix.to_s.length > 60
+      return false if !@title.nil? && @title.to_s.length > 60
+      return false if !@address1.nil? && @address1.to_s.length > 60
+      return false if !@address2.nil? && @address2.to_s.length > 60
+      return false if !@address3.nil? && @address3.to_s.length > 60
+      return false if !@address4.nil? && @address4.to_s.length > 60
+      return false if !@locality.nil? && @locality.to_s.length > 50
+      return false if !@administrative_area.nil? && @administrative_area.to_s.length > 20
+      return false if !@postal_code.nil? && @postal_code.to_s.length > 10
+      return false if !@country.nil? && @country.to_s.length > 2
+      return false if !@district.nil? && @district.to_s.length > 50
+      return false if !@building_number.nil? && @building_number.to_s.length > 256
+      return false if !@email.nil? && @email.to_s.length > 255
+      return false if !@email_domain.nil? && @email_domain.to_s.length > 100
+      return false if !@phone_number.nil? && @phone_number.to_s.length > 15
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] first_name Value to be assigned
+    def first_name=(first_name)
+      if !first_name.nil? && first_name.to_s.length > 60
+        fail ArgumentError, 'invalid value for "first_name", the character length must be smaller than or equal to 60.'
+      end
+
+      @first_name = first_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] last_name Value to be assigned
+    def last_name=(last_name)
+      if !last_name.nil? && last_name.to_s.length > 60
+        fail ArgumentError, 'invalid value for "last_name", the character length must be smaller than or equal to 60.'
+      end
+
+      @last_name = last_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] middle_name Value to be assigned
+    def middle_name=(middle_name)
+      if !middle_name.nil? && middle_name.to_s.length > 60
+        fail ArgumentError, 'invalid value for "middle_name", the character length must be smaller than or equal to 60.'
+      end
+
+      @middle_name = middle_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] name_suffix Value to be assigned
+    def name_suffix=(name_suffix)
+      if !name_suffix.nil? && name_suffix.to_s.length > 60
+        fail ArgumentError, 'invalid value for "name_suffix", the character length must be smaller than or equal to 60.'
+      end
+
+      @name_suffix = name_suffix
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] title Value to be assigned
+    def title=(title)
+      if !title.nil? && title.to_s.length > 60
+        fail ArgumentError, 'invalid value for "title", the character length must be smaller than or equal to 60.'
+      end
+
+      @title = title
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address1 Value to be assigned
+    def address1=(address1)
+      if !address1.nil? && address1.to_s.length > 60
+        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 60.'
+      end
+
+      @address1 = address1
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address2 Value to be assigned
+    def address2=(address2)
+      if !address2.nil? && address2.to_s.length > 60
+        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 60.'
+      end
+
+      @address2 = address2
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address3 Value to be assigned
+    def address3=(address3)
+      if !address3.nil? && address3.to_s.length > 60
+        fail ArgumentError, 'invalid value for "address3", the character length must be smaller than or equal to 60.'
+      end
+
+      @address3 = address3
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] address4 Value to be assigned
+    def address4=(address4)
+      if !address4.nil? && address4.to_s.length > 60
+        fail ArgumentError, 'invalid value for "address4", the character length must be smaller than or equal to 60.'
+      end
+
+      @address4 = address4
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] locality Value to be assigned
+    def locality=(locality)
+      if !locality.nil? && locality.to_s.length > 50
+        fail ArgumentError, 'invalid value for "locality", the character length must be smaller than or equal to 50.'
+      end
+
+      @locality = locality
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] administrative_area Value to be assigned
+    def administrative_area=(administrative_area)
+      if !administrative_area.nil? && administrative_area.to_s.length > 20
+        fail ArgumentError, 'invalid value for "administrative_area", the character length must be smaller than or equal to 20.'
+      end
+
+      @administrative_area = administrative_area
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] postal_code Value to be assigned
+    def postal_code=(postal_code)
+      if !postal_code.nil? && postal_code.to_s.length > 10
+        fail ArgumentError, 'invalid value for "postal_code", the character length must be smaller than or equal to 10.'
+      end
+
+      @postal_code = postal_code
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] country Value to be assigned
+    def country=(country)
+      if !country.nil? && country.to_s.length > 2
+        fail ArgumentError, 'invalid value for "country", the character length must be smaller than or equal to 2.'
+      end
+
+      @country = country
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] district Value to be assigned
+    def district=(district)
+      if !district.nil? && district.to_s.length > 50
+        fail ArgumentError, 'invalid value for "district", the character length must be smaller than or equal to 50.'
+      end
+
+      @district = district
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] building_number Value to be assigned
+    def building_number=(building_number)
+      if !building_number.nil? && building_number.to_s.length > 256
+        fail ArgumentError, 'invalid value for "building_number", the character length must be smaller than or equal to 256.'
+      end
+
+      @building_number = building_number
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] email Value to be assigned
+    def email=(email)
+      if !email.nil? && email.to_s.length > 255
+        fail ArgumentError, 'invalid value for "email", the character length must be smaller than or equal to 255.'
+      end
+
+      @email = email
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] email_domain Value to be assigned
+    def email_domain=(email_domain)
+      if !email_domain.nil? && email_domain.to_s.length > 100
+        fail ArgumentError, 'invalid value for "email_domain", the character length must be smaller than or equal to 100.'
+      end
+
+      @email_domain = email_domain
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] phone_number Value to be assigned
+    def phone_number=(phone_number)
+      if !phone_number.nil? && phone_number.to_s.length > 15
+        fail ArgumentError, 'invalid value for "phone_number", the character length must be smaller than or equal to 15.'
+      end
+
+      @phone_number = phone_number
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          first_name == o.first_name &&
+          last_name == o.last_name &&
+          middle_name == o.middle_name &&
+          name_suffix == o.name_suffix &&
+          title == o.title &&
+          company == o.company &&
+          address1 == o.address1 &&
+          address2 == o.address2 &&
+          address3 == o.address3 &&
+          address4 == o.address4 &&
+          locality == o.locality &&
+          administrative_area == o.administrative_area &&
+          postal_code == o.postal_code &&
+          country == o.country &&
+          district == o.district &&
+          building_number == o.building_number &&
+          email == o.email &&
+          email_domain == o.email_domain &&
+          phone_number == o.phone_number &&
+          phone_type == o.phone_type
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [first_name, last_name, middle_name, name_suffix, title, company, address1, address2, address3, address4, locality, administrative_area, postal_code, country, district, building_number, email, email_domain, phone_number, phone_type].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end