couchbase 3.0.1-universal-darwin-19 → 3.0.2-universal-darwin-19

data/lib/couchbase/datastructures/couchbase_set.rb

@@ -13,6 +13,7 @@
 #  limitations under the License.
 
 require "couchbase/collection"
+require "couchbase/options"
 require "couchbase/errors"
 
 module Couchbase
@@ -28,8 +29,8 @@ module Couchbase
       #
       # @param [String] id the id of the document to back the set.
       # @param [Collection] collection the collection through which to interact with the document.
-      # @param [CouchbaseListOptions] options customization of the datastructure
-      def initialize(id, collection, options = CouchbaseSetOptions.new)
+      # @param [Options::CouchbaseSet] options customization of the datastructure
+      def initialize(id, collection, options = Options::CouchbaseSet.new)
         @id = id
         @collection = collection
         @options = options
@@ -121,19 +122,7 @@ module Couchbase
       end
     end
 
-    class CouchbaseSetOptions
-      attr_accessor :get_options
-      attr_accessor :lookup_in_options
-      attr_accessor :mutate_in_options
-      attr_accessor :remove_options
-
-      def initialize
-        @get_options = Collection::GetOptions.new
-        @remove_options = Collection::RemoveOptions.new
-        @lookup_in_options = Collection::LookupInOptions.new
-        @mutate_in_options = Collection::MutateInOptions.new
-        @mutate_in_options.store_semantics = :upsert
-      end
-    end
+    # @api private
+    CouchbaseSetOptions = ::Couchbase::Options::CouchbaseSet
   end
 end

data/lib/couchbase/diagnostics.rb

@@ -0,0 +1,181 @@
+#    Copyright 2020 Couchbase, Inc.
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+
+module Couchbase
+  class DiagnosticsResult
+    class ServiceInfo
+      # @return [String] endpoint unique identifier
+      attr_accessor :id
+
+      # Possible states are:
+      #
+      # :disconnected:: the endpoint is not reachable
+      # :connecting:: currently connecting (includes auth, handshake, etc.)
+      # :connected:: connected and ready
+      # :disconnecting:: disconnecting (after being connected)
+      #
+      # @return [Symbol] state of the endpoint
+      attr_accessor :state
+
+      # @return [String, nil] optional string with additional explanation for the state
+      attr_accessor :details
+
+      # @return [Integer] how long ago the endpoint was active (in microseconds)
+      attr_accessor :last_activity_us
+
+      # @return [String] remote address of the connection
+      attr_accessor :remote
+
+      # @return [String] local address of the connection
+      attr_accessor :local
+
+      # @yieldparam [ServiceInfo] self
+      def initialize
+        yield self if block_given?
+      end
+
+      def to_json(*args)
+        data = {
+          id: @id,
+          state: @state,
+          remote: @remote,
+          local: @local,
+        }
+        data[:details] = @details if @details
+        data[:last_activity_us] = @last_activity_us if @last_activity_us
+        data.to_json(*args)
+      end
+    end
+
+    # @return [String] report id
+    attr_accessor :id
+
+    # @return [String] SDK identifier
+    attr_accessor :sdk
+
+    # Returns information about currently service endpoints, that known to the library at the moment.
+    #
+    # :kv:: Key/Value data service
+    # :query:: N1QL query service
+    # :analytics:: Analtyics service
+    # :search:: Full text search service
+    # :views:: Views service
+    # :mgmt:: Management service
+    #
+    # @return [Hash<Symbol, ServiceInfo>] map service types to info
+    attr_accessor :services
+
+    # @yieldparam [DiagnosticsResult] self
+    def initialize
+      @services = {}
+      yield self if block_given?
+    end
+
+    # @api private
+    # @return [Integer] version
+    attr_accessor :version
+
+    def to_json(*args)
+      {
+        version: @version,
+        id: @id,
+        sdk: @sdk,
+        services: @services,
+      }.to_json(*args)
+    end
+  end
+
+  class PingResult
+    class ServiceInfo
+      # @return [String] endpoint unique identifier
+      attr_accessor :id
+
+      # Possible states are:
+      #
+      # :ok:: endpoint is healthy
+      # :timeout:: endpoint didn't respond in time
+      # :error:: request to endpoint has failed, see {#error} for additional details
+      #
+      # @return [Symbol] state of the endpoint
+      attr_accessor :state
+
+      # @return [String, nil] optional string with additional explanation for the state
+      attr_accessor :error
+
+      # @return [Integer] how long ago the endpoint was active (in microseconds)
+      attr_accessor :latency
+
+      # @return [String] remote address of the connection
+      attr_accessor :remote
+
+      # @return [String] local address of the connection
+      attr_accessor :local
+
+      # @yieldparam [ServiceInfo] self
+      def initialize
+        @error = nil
+        yield self if block_given?
+      end
+
+      def to_json(*args)
+        data = {
+          id: @id,
+          state: @state,
+          remote: @remote,
+          local: @local,
+          latency: @latency,
+        }
+        data[:error] = @error if @error
+        data.to_json(*args)
+      end
+    end
+
+    # @return [String] report id
+    attr_accessor :id
+
+    # @return [String] SDK identifier
+    attr_accessor :sdk
+
+    # Returns information about currently service endpoints, that known to the library at the moment.
+    #
+    # :kv:: Key/Value data service
+    # :query:: N1QL query service
+    # :analytics:: Analtyics service
+    # :search:: Full text search service
+    # :views:: Views service
+    # :mgmt:: Management service
+    #
+    # @return [Hash<Symbol, ServiceInfo>] map service types to info
+    attr_accessor :services
+
+    # @yieldparam [DiagnosticsResult] self
+    def initialize
+      @services = {}
+      yield self if block_given?
+    end
+
+    # @api private
+    # @return [Integer] version
+    attr_accessor :version
+
+    def to_json(*args)
+      {
+        version: @version,
+        id: @id,
+        sdk: @sdk,
+        services: @services,
+      }.to_json(*args)
+    end
+  end
+end

data/lib/couchbase/json_transcoder.rb

@@ -26,7 +26,7 @@ module Couchbase
     # @param [Integer, :json] _flags bit field, describing how the data encoded
     # @return Object decoded document
     def decode(blob, _flags)
-      JSON.parse(blob) unless blob.nil?
+      JSON.parse(blob) unless blob&.empty?
     end
   end
 end

data/lib/couchbase/{common_options.rb → logger.rb}

@@ -13,17 +13,30 @@
 #  limitations under the License.
 
 module Couchbase
-  class CommonOptions
-    # @return [Integer] the time in milliseconds allowed for the operation to complete
-    attr_accessor :timeout
-
-    # @return [Proc] the custom retry strategy, if set
-    attr_accessor :retry_strategy
-
-    # @return [Hash] the client context data, if set
-    attr_accessor :client_context
+  # Set log level
+  #
+  # @note The level might be also be set with environment variable +COUCHBASE_BACKEND_LOG_LEVEL+
+  #
+  # @param [Symbol] level new log level.
+  #
+  #   Allowed levels (in order of decreasing verbosity):
+  #   * +:trace+
+  #   * +:debug+
+  #   * +:info+ (default)
+  #   * +:warn+
+  #   * +:error+
+  #   * +:critical+
+  #   * +:off+
+  #
+  # @return [void]
+  def self.log_level=(level)
+    Backend.set_log_level(level)
+  end
 
-    # @return [Span] If set holds the parent span, that should be used for this request
-    attr_accessor :parent_span
+  # Get current log level
+  #
+  # @return [Symbol] current log level
+  def self.log_level
+    Backend.get_log_level
   end
 end

data/lib/couchbase/management/query_index_manager.rb

@@ -146,7 +146,7 @@ module Couchbase
       #
       # @param [String] bucket_name name of the bucket
       # @param [Array<String>] index_names names of the indexes to watch
-      # @param [Integer] timeout
+      # @param [Integer, #in_milliseconds] timeout
       # @param [WatchIndexesOptions] options
       #
       # @raise [ArgumentError]

data/lib/couchbase/management/user_manager.rb

@@ -340,6 +340,7 @@ module Couchbase
       attr_accessor :description
 
       def initialize
+        super
         yield self if block_given?
       end
     end
@@ -361,6 +362,7 @@ module Couchbase
       attr_writer :origins
 
       def initialize
+        super
         @origins = []
         yield self if block_given?
       end
@@ -403,6 +405,7 @@ module Couchbase
       attr_accessor :external_groups
 
       def initialize
+        super
         @effective_roles = []
         yield self if block_given?
       end

data/lib/couchbase/options.rb

@@ -0,0 +1,2094 @@
+#    Copyright 2020 Couchbase, Inc.
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+
+module Couchbase
+  # Definition of the Option classes for data APIs
+  module Options # rubocop:disable Metrics/ModuleLength
+    # Base class for most of the options
+    class Base
+      attr_accessor :timeout # @return [Integer, #in_milliseconds, nil]
+      attr_accessor :retry_strategy # @return [Proc, nil]
+      attr_accessor :client_context # @return [Hash, nil]
+      attr_accessor :parent_span # @return [Span, nil]
+
+      # @param [Integer, #in_milliseconds, nil] timeout the time in milliseconds allowed for the operation to complete
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Base]
+      def initialize(timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        @timeout = timeout
+        @retry_strategy = retry_strategy
+        @client_context = client_context
+        @parent_span = parent_span
+        yield self if block_given?
+      end
+    end
+
+    # Options for {Collection#get}
+    class Get < Base
+      attr_accessor :with_expiry # @return [Boolean]
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String, Integer)]
+
+      # Creates an instance of options for {Collection#get}
+      #
+      # @param [Array<String>] projections a list of paths that should be loaded if present.
+      # @param [Boolean] with_expiry if +true+ the expiration will be also fetched with {Collection#get}
+      # @param [JsonTranscoder, #decode(String, Integer)] transcoder used for decoding
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout the time in milliseconds allowed for the operation to complete
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Get] self
+      def initialize(projections: [],
+                     with_expiry: false,
+                     transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @projections = projections
+        @with_expiry = with_expiry
+        @transcoder = transcoder
+        @preserve_array_indexes = false
+        yield self if block_given?
+      end
+
+      # Allows to specify a custom list paths to fetch from the document instead of the whole.
+      #
+      # Note that a maximum of 16 individual paths can be projected at a time due to a server limitation. If you need
+      # more than that, think about fetching less-generic paths or the full document straight away.
+      #
+      # @param [String, Array<String>] paths a path that should be loaded if present.
+      def project(*paths)
+        @projections ||= []
+        @projections |= paths.flatten # union with current projections
+      end
+
+      # @api private
+      # @return [Boolean] whether to use sparse arrays (default +false+)
+      attr_accessor :preserve_array_indexes
+
+      # @api private
+      # @return [Array<String>] list of paths to project
+      attr_accessor :projections
+
+      # @api private
+      # @return [Boolean]
+      def need_projected_get?
+        @with_expiry || !@projections&.empty?
+      end
+
+      # @api private
+      def to_backend
+        options = {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+        options.update(with_expiry: true) if @with_expiry
+        unless @projections&.empty?
+          options.update({
+            projections: @projections,
+            preserve_array_indexes: @preserve_array_indexes,
+          })
+        end
+        options
+      end
+    end
+
+    # Options for {Collection#get_multi}
+    class GetMulti < Base
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String, Integer)]
+
+      # Creates an instance of options for {Collection#get_multi}
+      #
+      # @param [JsonTranscoder, #decode(String, Integer)] transcoder used for decoding
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout the time in milliseconds allowed for the operation to complete
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Get] self
+      def initialize(transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @transcoder = transcoder
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+      end
+    end
+
+    # Options for {Collection#get_and_lock}
+    class GetAndLock < Base
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String, Integer)]
+
+      # Creates an instance of options for {Collection#get_and_lock}
+      #
+      # @param [JsonTranscoder, #decode(String, Integer)] transcoder used for decoding
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [GetAndLock] self
+      def initialize(transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @transcoder = transcoder
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+      end
+    end
+
+    # Options for {Collection#get_and_touch}
+    class GetAndTouch < Base
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String, Integer)]
+
+      # Creates an instance of options for {Collection#get_and_touch}
+      #
+      # @param [JsonTranscoder, #decode(String, Integer)] transcoder used for decoding
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [GetAndTouch] self
+      def initialize(transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @transcoder = transcoder
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+      end
+    end
+
+    # Options for {Collection#get_all_replicas}
+    class GetAllReplicas < Base
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String, Integer)]
+
+      # Creates an instance of options for {Collection#get_all_replicas}
+      #
+      # @param [JsonTranscoder, #decode(String, Integer)] transcoder used for decoding
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [GetAllReplicas] self
+      def initialize(transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @transcoder = transcoder
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+      end
+    end
+
+    # Options for {Collection#get_any_replica}
+    class GetAnyReplica < Base
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String, Integer)]
+
+      # Creates an instance of options for {Collection#get_any_replica}
+      #
+      # @param [JsonTranscoder, #decode(String, Integer)] transcoder used for decoding
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [GetAnyReplica] self
+      def initialize(transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @transcoder = transcoder
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+      end
+    end
+
+    # Options for {Collection#exists}
+    class Exists < Base
+      # Creates an instance of options for {Collection#exists}
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Exists self
+      def initialize(timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+      end
+    end
+
+    # Options for {Collection#touch}
+    class Touch < Base
+      # Creates an instance of options for {Collection#touch}
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [TouchOptions] self
+      def initialize(timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+      end
+    end
+
+    # Options for {Collection#unlock}
+    class Unlock < Base
+      # Creates an instance of options for {Collection#unlock}
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Unlock] self
+      def initialize(timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+        }
+      end
+    end
+
+    # Options for {Collection#remove}
+    class Remove < Base
+      attr_accessor :cas # @return [Integer, nil]
+      attr_accessor :durability_level # @return [Symbol]
+
+      # Creates an instance of options for {Collection#remove}
+      #
+      # @param [Integer, nil] cas CAS value for optimistic locking
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Remove]
+      def initialize(cas: nil,
+                     durability_level: :none,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @cas = cas
+        @durability_level = durability_level
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          durability_level: @durability_level,
+          cas: @cas,
+        }
+      end
+    end
+
+    # Options for {Collection#remove_multi}
+    class RemoveMulti < Base
+      attr_accessor :durability_level # @return [Symbol]
+
+      # Creates an instance of options for {Collection#remove}
+      #
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Remove]
+      def initialize(durability_level: :none,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @durability_level = durability_level
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          durability_level: @durability_level,
+        }
+      end
+    end
+
+    # Options for {Collection#insert}
+    class Insert < Base
+      attr_accessor :expiry # @return [Integer, #in_seconds, nil]
+      attr_accessor :transcoder # @return [JsonTranscoder, #encode(Object)]
+      attr_accessor :durability_level # @return [Symbol]
+
+      # Creates an instance of options for {Collection#insert}
+      #
+      # @param [Integer, #in_seconds, nil] expiry expiration time to associate with the document
+      # @param [JsonTranscoder, #encode(Object)] transcoder used for encoding
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Insert]
+      def initialize(expiry: nil,
+                     transcoder: JsonTranscoder.new,
+                     durability_level: :none,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @expiry = expiry
+        @transcoder = transcoder
+        @durability_level = durability_level
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          expiry: @expiry.respond_to?(:in_seconds) ? @expiry.public_send(:in_seconds) : @expiry,
+          durability_level: @durability_level,
+        }
+      end
+    end
+
+    # Options for {Collection#upsert}
+    class Upsert < Base
+      attr_accessor :expiry # @return [Integer, #in_seconds, nil]
+      attr_accessor :transcoder # @return [JsonTranscoder, #encode(Object)]
+      attr_accessor :durability_level # @return [Symbol]
+
+      # Creates an instance of options for {Collection#upsert}
+      #
+      # @param [Integer, #in_seconds, nil] expiry expiration time to associate with the document
+      # @param [JsonTranscoder, #encode(Object)] transcoder used for encoding
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Upsert]
+      def initialize(expiry: nil,
+                     transcoder: JsonTranscoder.new,
+                     durability_level: :none,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @expiry = expiry
+        @transcoder = transcoder
+        @durability_level = durability_level
+        yield self if block_given?
+      end
+
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          expiry: @expiry.respond_to?(:in_seconds) ? @expiry.public_send(:in_seconds) : @expiry,
+          durability_level: @durability_level,
+        }
+      end
+    end
+
+    # Options for {Collection#upsert_multi}
+    class UpsertMulti < Base
+      attr_accessor :expiry # @return [Integer, #in_seconds, nil]
+      attr_accessor :transcoder # @return [JsonTranscoder, #encode(Object)]
+      attr_accessor :durability_level # @return [Symbol]
+
+      # Creates an instance of options for {Collection#upsert}
+      #
+      # @param [Integer, #in_seconds, nil] expiry expiration time to associate with the document
+      # @param [JsonTranscoder, #encode(Object)] transcoder used for encoding
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Upsert]
+      def initialize(expiry: nil,
+                     transcoder: JsonTranscoder.new,
+                     durability_level: :none,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @expiry = expiry
+        @transcoder = transcoder
+        @durability_level = durability_level
+        yield self if block_given?
+      end
+
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          expiry: @expiry.respond_to?(:in_seconds) ? @expiry.public_send(:in_seconds) : @expiry,
+          durability_level: @durability_level,
+        }
+      end
+    end
+
+    # Options for {Collection#replace}
+    class Replace < Base
+      attr_accessor :expiry # @return [Integer, #in_seconds, nil]
+      attr_accessor :transcoder # @return [JsonTranscoder, #encode(Object)]
+      attr_accessor :cas # @return [Integer, nil]
+      attr_accessor :durability_level # @return [Symbol]
+
+      # Creates an instance of options for {Collection#replace}
+      #
+      # @param [Integer, #in_seconds, nil] expiry expiration time to associate with the document
+      # @param [JsonTranscoder, #encode(Object)] transcoder used for encoding
+      # @param [Integer, nil] cas a CAS value that will be taken into account on the server side for optimistic concurrency
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Replace]
+      def initialize(expiry: nil,
+                     transcoder: JsonTranscoder.new,
+                     cas: nil,
+                     durability_level: :none,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @expiry = expiry
+        @transcoder = transcoder
+        @cas = cas
+        @durability_level = durability_level
+        yield self if block_given?
+      end
+
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          expiry: @expiry.respond_to?(:in_seconds) ? @expiry.public_send(:in_seconds) : @expiry,
+          durability_level: @durability_level,
+          cas: @cas,
+        }
+      end
+    end
+
+    # Options for {Collection#mutate_in}
+    class MutateIn < Base
+      attr_accessor :expiry # @return [Integer, #in_seconds, nil]
+      attr_accessor :store_semantics # @return [Symbol]
+      attr_accessor :cas # @return [Integer, nil]
+      attr_accessor :access_deleted # @return [Boolean]
+      attr_accessor :create_as_deleted # @return [Boolean]
+      attr_accessor :durability_level # @return [Symbol]
+      attr_accessor :transcoder # @return [JsonTranscoder, #encode(Object)]
+
+      # Creates an instance of options for {Collection#mutate_in}
+      #
+      # @param [Integer, #in_seconds, nil] expiry expiration time to associate with the document
+      # @param [Symbol] store_semantics describes how the outer document store semantics on subdoc should act
+      #  +:replace+:: replace the document, fail if it does not exist. This is the default
+      #  +:upsert+:: replace the document or create if it does not exist
+      #  +:insert+:: create the document, fail if it exists
+      # @param [Integer, nil] cas a CAS value that will be taken into account on the server side for optimistic concurrency
+      # @param [Boolean] access_deleted for internal use only: allows access to deleted documents that are in "tombstone" form
+      # @param [Boolean] create_as_deleted for internal use only: allows creating documents in "tombstone" form
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      # @param [JsonTranscoder, #encode(Object)] transcoder used for encoding
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [MutateIn]
+      def initialize(expiry: nil,
+                     store_semantics: :replace,
+                     cas: nil,
+                     access_deleted: false,
+                     create_as_deleted: false,
+                     durability_level: :none,
+                     transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @expiry = expiry
+        @store_semantics = store_semantics
+        @cas = cas
+        @access_deleted = access_deleted
+        @create_as_deleted = create_as_deleted
+        @durability_level = durability_level
+        @transcoder = transcoder
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          expiry: @expiry.respond_to?(:in_seconds) ? @expiry.public_send(:in_seconds) : @expiry,
+          durability_level: @durability_level,
+          cas: @cas,
+          store_semantics: @store_semantics,
+          access_deleted: @access_deleted,
+          create_as_deleted: @create_as_deleted,
+        }
+      end
+    end
+
+    # Options for {Collection#lookup_in}
+    class LookupIn < Base
+      attr_accessor :access_deleted # @return [Boolean]
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String)]
+
+      # Creates an instance of options for {Collection#lookup_in}
+      #
+      # @param [Boolean] access_deleted for internal use only: allows access to deleted documents that are in "tombstone" form
+      # @param [JsonTranscoder, #decode(String)] transcoder used for encoding
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [LookupIn] self
+      def initialize(access_deleted: false,
+                     transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @access_deleted = access_deleted
+        @transcoder = transcoder
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          access_deleted: @access_deleted,
+        }
+      end
+    end
+
+    # Options for {BinaryCollection#append}
+    class Append < Base
+      attr_accessor :cas # @return [Integer]
+
+      # Creates an instance of options for {BinaryCollection#append}
+      #
+      # @param [Integer] cas The default CAS used (0 means no CAS in this context)
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Append] self
+      def initialize(cas: nil,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @cas = cas
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          cas: @cas,
+        }
+      end
+    end
+
+    # Options for {BinaryCollection#prepend}
+    class Prepend < Base
+      # @return [Integer] The default CAS used (0 means no CAS in this context)
+      attr_accessor :cas
+
+      # Creates an instance of options for {BinaryCollection#prepend}
+      #
+      # @param [Integer] cas The default CAS used (0 means no CAS in this context)
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Prepend] self
+      def initialize(cas: nil,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @cas = cas
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          cas: @cas,
+        }
+      end
+    end
+
+    # Options for {BinaryCollection#increment}
+    class Increment < Base
+      attr_reader :delta # @return [Integer]
+      attr_accessor :initial # @return [Integer]
+      attr_accessor :expiry # @return [Integer, #in_seconds]
+      attr_accessor :durability_level # @return [Symbol]
+
+      # Creates an instance of options for {BinaryCollection#increment}
+      #
+      # @param [Integer] delta the delta for the operation
+      # @param [Integer] initial if present, holds the initial value
+      # @param [Integer, #in_seconds] expiry if set, holds the expiration for the operation
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Increment] self
+      def initialize(delta: 1,
+                     initial: nil,
+                     expiry: nil,
+                     durability_level: :none,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        raise ArgumentError, "the delta cannot be less than 0" if delta.negative?
+
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @delta = delta
+        @initial = initial
+        @expiry = expiry
+        @durability_level = durability_level
+        yield self if block_given?
+      end
+
+      # @param [Integer] value delta for the operation
+      def delta=(value)
+        raise ArgumentError, "the delta cannot be less than 0" if delta.negative?
+
+        @delta = value
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          delta: @delta,
+          initial_value: @initial,
+          expiry: @expiry.respond_to?(:in_seconds) ? @expiry.public_send(:in_seconds) : @expiry,
+          durability_level: @durability_level,
+        }
+      end
+    end
+
+    # Options for {BinaryCollection#decrement}
+    class Decrement < Base
+      attr_reader :delta # @return [Integer]
+      attr_accessor :initial # @return [Integer]
+      attr_accessor :expiry # @return [Integer, #in_seconds]
+      attr_accessor :durability_level # @return [Symbol]
+
+      # Creates an instance of options for {BinaryCollection#decrement}
+      #
+      # @param [Integer] delta the delta for the operation
+      # @param [Integer] initial if present, holds the initial value
+      # @param [Integer, #in_seconds] expiry if set, holds the expiration for the operation
+      # @param [Symbol] durability_level level of durability
+      #  +:none+::
+      #     no enhanced durability required for the mutation
+      #  +:majority+::
+      #     the mutation must be replicated to a majority of the Data Service nodes
+      #     (that is, held in the memory allocated to the bucket)
+      #  +:majority_and_persist_to_active+::
+      #     The mutation must be replicated to a majority of the Data Service nodes.
+      #     Additionally, it must be persisted (that is, written and synchronised to disk) on the
+      #     node hosting the active partition (vBucket) for the data.
+      #  +:persist_to_majority+::
+      #     The mutation must be persisted to a majority of the Data Service nodes.
+      #     Accordingly, it will be written to disk on those nodes.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Decrement] self
+      def initialize(delta: 1,
+                     initial: nil,
+                     expiry: nil,
+                     durability_level: :none,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        raise ArgumentError, "the delta cannot be less than 0" if delta.negative?
+
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @delta = delta
+        @initial = initial
+        @expiry = expiry
+        @durability_level = durability_level
+        yield self if block_given?
+      end
+
+      # @param [Integer] value delta for the operation
+      def delta=(value)
+        raise ArgumentError, "the delta cannot be less than 0" if delta.negative?
+
+        @delta = value
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          delta: @delta,
+          initial_value: @initial,
+          expiry: @expiry.respond_to?(:in_seconds) ? @expiry.public_send(:in_seconds) : @expiry,
+          durability_level: @durability_level,
+        }
+      end
+    end
+
+    # Options for {Datastructures::CouchbaseList#initialize}
+    class CouchbaseList
+      attr_accessor :get_options # @return [Get]
+      attr_accessor :remove_options # @return [Remove]
+      attr_accessor :lookup_in_options # @return [LookupIn]
+      attr_accessor :mutate_in_options # @return [MutateIn]
+
+      # Creates an instance of options for {CouchbaseList#initialize}
+      #
+      # @param [Get] get_options
+      # @param [Remove] remove_options
+      # @param [LookupIn] lookup_in_options
+      # @param [MutateIn] mutate_in_options
+      #
+      # @yieldparam [CouchbaseList]
+      def initialize(get_options: Get.new,
+                     remove_options: Remove.new,
+                     lookup_in_options: LookupIn.new,
+                     mutate_in_options: MutateIn.new(store_semantics: :upsert))
+        @get_options = get_options
+        @remove_options = remove_options
+        @lookup_in_options = lookup_in_options
+        @mutate_in_options = mutate_in_options
+        yield self if block_given?
+      end
+    end
+
+    # Options for {Datastructures::CouchbaseMap#initialize}
+    class CouchbaseMap
+      attr_accessor :get_options # @return [Get]
+      attr_accessor :remove_options # @return [Remove]
+      attr_accessor :lookup_in_options # @return [LookupIn]
+      attr_accessor :mutate_in_options # @return [MutateIn]
+
+      # Creates an instance of options for {CouchbaseMap#initialize}
+      #
+      # @param [Get] get_options
+      # @param [Remove] remove_options
+      # @param [LookupIn] lookup_in_options
+      # @param [MutateIn] mutate_in_options
+      #
+      # @yieldparam [CouchbaseMap]
+      def initialize(get_options: Get.new,
+                     remove_options: Remove.new,
+                     lookup_in_options: LookupIn.new,
+                     mutate_in_options: MutateIn.new(store_semantics: :upsert))
+        @get_options = get_options
+        @remove_options = remove_options
+        @lookup_in_options = lookup_in_options
+        @mutate_in_options = mutate_in_options
+        yield self if block_given?
+      end
+    end
+
+    # Options for {Datastructures::CouchbaseQueue#initialize}
+    class CouchbaseQueue
+      attr_accessor :get_options # @return [Get]
+      attr_accessor :remove_options # @return [Remove]
+      attr_accessor :lookup_in_options # @return [LookupIn]
+      attr_accessor :mutate_in_options # @return [MutateIn]
+
+      # Creates an instance of options for {CouchbaseQueue#initialize}
+      #
+      # @param [Get] get_options
+      # @param [Remove] remove_options
+      # @param [LookupIn] lookup_in_options
+      # @param [MutateIn] mutate_in_options
+      #
+      # @yieldparam [CouchbaseQueue]
+      def initialize(get_options: Get.new,
+                     remove_options: Remove.new,
+                     lookup_in_options: LookupIn.new,
+                     mutate_in_options: MutateIn.new(store_semantics: :upsert))
+        @get_options = get_options
+        @remove_options = remove_options
+        @lookup_in_options = lookup_in_options
+        @mutate_in_options = mutate_in_options
+        yield self if block_given?
+      end
+    end
+
+    # Options for {Datastructures::CouchbaseSet#initialize}
+    class CouchbaseSet
+      attr_accessor :get_options # @return [Get]
+      attr_accessor :remove_options # @return [Remove]
+      attr_accessor :lookup_in_options # @return [LookupIn]
+      attr_accessor :mutate_in_options # @return [MutateIn]
+
+      # Creates an instance of options for {CouchbaseSet#initialize}
+      #
+      # @param [Get] get_options
+      # @param [Remove] remove_options
+      # @param [LookupIn] lookup_in_options
+      # @param [MutateIn] mutate_in_options
+      #
+      # @yieldparam [CouchbaseSet]
+      def initialize(get_options: Get.new,
+                     remove_options: Remove.new,
+                     lookup_in_options: LookupIn.new,
+                     mutate_in_options: MutateIn.new(store_semantics: :upsert))
+        @get_options = get_options
+        @remove_options = remove_options
+        @lookup_in_options = lookup_in_options
+        @mutate_in_options = mutate_in_options
+        yield self if block_given?
+      end
+    end
+
+    # Options for {Couchbase::Cluster.connect}
+    class Cluster
+      attr_accessor :authenticator # @return [PasswordAuthenticator, CertificateAuthenticator]
+
+      # Creates an instance of options for {Couchbase::Cluster.connect}
+      #
+      # @param [PasswordAuthenticator, CertificateAuthenticator] authenticator
+      #
+      # @yieldparam [Cluster] self
+      def initialize(authenticator: nil)
+        @authenticator = authenticator
+        yield self if block_given?
+      end
+
+      # @param [String] username
+      # @param [String] password
+      def authenticate(username, password)
+        @authenticator = PasswordAuthenticator.new(username, password)
+      end
+    end
+
+    # Options for {Couchbase::Cluster#diagnostics}
+    class Diagnostics
+      attr_accessor :report_id # @return [String]
+
+      # Creates an instance of options for {Couchbase::Cluster#diagnostics}
+      #
+      # @param [String] report_id Holds custom report ID.
+      #
+      # @yieldparam [Diagnostics] self
+      def initialize(report_id: nil)
+        @report_id = report_id
+        yield self if block_given?
+      end
+    end
+
+    # Options for {Couchbase::Bucket#ping}
+    class Ping
+      attr_accessor :report_id # @return [String]
+      attr_accessor :service_types # @return [Array<Symbol>]
+      attr_accessor :timeout # @return [Integer, #in_milliseconds]
+
+      # Creates an instance of options for {Couchbase::Bucket#ping}
+      #
+      # @param [String] report_id Holds custom report id.
+      # @@param [Array<Symbol>] service_types The service types to limit this diagnostics request
+      # @param [Integer, #in_milliseconds] timeout
+      #
+      # @yieldparam [Ping] self
+      def initialize(report_id: nil,
+                     service_types: [:kv, :query, :analytics, :search, :views, :management],
+                     timeout: nil)
+        @report_id = report_id
+        @service_types = service_types
+        @timeout = timeout
+        yield self if block_given?
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          service_types: @service_types,
+          report_id: @report_id,
+        }
+      end
+    end
+
+    # Options for {Couchbase::Cluster#analytics_query}
+    class Analytics < Base
+      attr_accessor :client_context_id # @return [String]
+      attr_accessor :scan_consistency # @return [Symbol]
+      attr_accessor :readonly # @return [Boolean]
+      attr_accessor :priority # @return [Boolean]
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String)]
+
+      # Creates new instance of options for {Couchbase::Cluster#analytics_query}
+      #
+      # @param [String] client_context_id provides a custom client context ID for this query
+      # @param [Symbol] scan_consistency specifies level of consistency for the query
+      #  +:not_bounded+::
+      #    The index will return whatever state it has to the analytics query engine at the time of query.
+      #
+      #    This is the default (for single-statement requests). No timestamp vector is used in the index scan.
+      #    This is also the fastest mode, because we avoid the cost of obtaining the vector, and we also avoid
+      #    any wait for the index
+      #  +:request_plus+::
+      #    The index will wait until all mutations have been processed at the time of request before being processed
+      #    in the analytics query engine.
+      #
+      #    This implements strong consistency per request. Before processing the request, a current vector is obtained.
+      #    The vector is used as a lower bound for the statements in the request.
+      # @param [Boolean] readonly allows explicitly marking a query as being readonly and not mutating any documents on
+      #   the server side.
+      # @param [Boolean] priority allows to give certain requests higher priority than others
+      # @param [JsonTranscoder] transcoder to decode rows
+      # @param [Array<#to_json>, nil] positional_parameters parameters to be used as substitution for numbered macros
+      #   like +$1+, +$2+ in query string
+      # @param [Hash<String => #to_json>, nil] named_parameters parameters to be used as substitution for named macros
+      #   like +$name+ in query string
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @note Either +positional_parameters+ or +named_parameters+ may be specified.
+      #
+      # @yieldparam [Analytics] self
+      def initialize(client_context_id: nil,
+                     scan_consistency: nil,
+                     readonly: false,
+                     priority: nil,
+                     transcoder: JsonTranscoder.new,
+                     positional_parameters: nil,
+                     named_parameters: nil,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        raise ArgumentError, "Cannot pass positional and named parameters at the same time" if positional_parameters && named_parameters
+
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @client_context_id = client_context_id
+        @scan_consistency = scan_consistency
+        @readonly = readonly
+        @priority = priority
+        @transcoder = transcoder
+        @positional_parameters = positional_parameters
+        @named_parameters = named_parameters
+        @raw_parameters = {}
+        yield self if block_given?
+      end
+
+      # Sets positional parameters for the query
+      #
+      # @param [Array] positional the list of parameters that have to be substituted in the statement
+      def positional_parameters(positional)
+        @positional_parameters = positional
+        @named_parameters = nil
+      end
+
+      # Sets named parameters for the query
+      #
+      # @param [Hash] named the key/value map of the parameters to substitute in the statement
+      def named_parameters(named)
+        @named_parameters = named
+        @positional_parameters = nil
+      end
+
+      # Allows providing custom JSON key/value pairs for advanced usage
+      #
+      # @param [String] key the parameter name (key of the JSON property)
+      # @param [Object] value the parameter value (value of the JSON property)
+      def raw(key, value)
+        @raw_parameters[key] = JSON.generate(value)
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          client_context_id: @client_context_id,
+          scan_consistency: @scan_consistency,
+          readonly: @readonly,
+          priority: @priority,
+          positional_parameters: export_positional_parameters,
+          named_parameters: export_named_parameters,
+          raw_parameters: @raw_parameters,
+        }
+      end
+
+      private
+
+      # @api private
+      # @return [Array<String>, nil]
+      def export_positional_parameters
+        @positional_parameters&.map { |p| JSON.dump(p) }
+      end
+
+      # @api private
+      # @return [Hash<String => String>, nil]
+      def export_named_parameters
+        @named_parameters&.each_with_object({}) { |(n, v), o| o[n.to_s] = JSON.dump(v) }
+      end
+
+      # @api private
+      # @return [Hash<String => #to_json>]
+      attr_reader :raw_parameters
+    end
+
+    # Options for {Couchbase::Cluster#query}
+    class Query < Base
+      attr_accessor :adhoc # @return [Boolean]
+      attr_accessor :client_context_id # @return [String]
+      attr_accessor :max_parallelism # @return [Integer]
+      attr_accessor :readonly # @return [Boolean]
+      attr_accessor :scan_wait # @return [Integer, #in_milliseconds]
+      attr_accessor :scan_cap # @return [Integer]
+      attr_accessor :pipeline_batch # @return [Integer]
+      attr_accessor :pipeline_cap # @return [Integer]
+      attr_accessor :metrics # @return [Boolean]
+      attr_accessor :profile # @return [Symbol]
+      attr_accessor :flex_index # @return [Boolean]
+      attr_accessor :scope_qualifier # @return [String]
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String)]
+
+      # Creates new instance of options for {Couchbase::Cluster#query}
+      #
+      # @param [Boolean] adhoc allows turning this request into a prepared statement query
+      # @param [String, nil] client_context_id provides a custom client context ID for this query
+      # @param [Integer, nil] max_parallelism allows overriding the default maximum parallelism for the query execution
+      #   on the server side.
+      # @param [Boolean, nil] readonly allows explicitly marking a query as being readonly and not mutating any
+      #   documents on the server side.
+      # @param [Integer, #in_milliseconds, nil] scan_wait The maximum duration (in milliseconds) the query engine
+      #   is willing to wait before failing. Allows customizing how long (in milliseconds) the query engine is willing
+      #   to wait until the index catches up to whatever scan consistency is asked for in this query. Note that if
+      #   +:not_bounded+ consistency level is used, this method doesn't do anything at all. If no value is provided to
+      #   this method, the server default is used.
+      # @param [Integer, nil] scan_cap customize the maximum buffered channel size between the indexer and the query
+      #   service
+      # @param [Integer, nil] pipeline_cap customize the number of items execution operators can batch for fetch
+      #   from the Key Value layer on the server.
+      # @param [Integer, nil] pipeline_batch customize the maximum number of items each execution operator can buffer
+      #   between various operators on the server.
+      # @param [Boolean, nil] metrics enables per-request metrics in the trailing section of the query
+      # @param [Symbol] profile customize server profile level for this query
+      #   +:off+::
+      #     No profiling information is added to the query response
+      #   +:phases+::
+      #     The query response includes a profile section with stats and details about various phases of the query plan
+      #     and execution. Three phase times will be included in the +system:active_requests+ and
+      #     +system:completed_requests+ monitoring keyspaces.
+      #   +:timings+::
+      #     Besides the phase times, the profile section of the query response document will include a full query plan
+      #     with timing and information about the number of processed documents at each phase. This information will be
+      #     included in the system:active_requests and system:completed_requests keyspaces.
+      # @param [Symbol, nil] scan_consistency Sets the mutation tokens this query should be consistent with. Overrides
+      #   +mutation_state+.
+      #   +:not_bounded+::
+      #     The indexer will return whatever state it has to the query engine at the time of query. This is the default
+      #     (for single-statement requests).
+      #   +:request_plus+::
+      #     The indexer will wait until all mutations have been processed at the time of request before returning to
+      #     the query engine.
+      # @return [Boolean, nil] flex_index Tells the query engine to use a flex index (utilizing the search service)
+      # @param [String, nil] scope_qualifier Associate scope qualifier (also known as +query_context+) with the query.
+      #   The qualifier must be in form +{bucket_name}.{scope_name}+ or +default:{bucket_name}.{scope_name}+.
+      # @param [JsonTranscoder] transcoder to decode rows
+      # @param [Array<#to_json>, nil] positional_parameters parameters to be used as substitution for numbered macros
+      #   like +$1+, +$2+ in query string
+      # @param [Hash<String => #to_json>, nil] named_parameters parameters to be used as substitution for named macros
+      #   like +$name+ in query string.
+      #
+      # @param [MutationState, nil] mutation_state Sets the mutation tokens this query should be consistent with.
+      #   Overrides +scan_consistency+.
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @note Either +positional_parameters+ or +named_parameters+ may be specified.
+      #
+      # @yieldparam [Query] self
+      def initialize(adhoc: true,
+                     client_context_id: nil,
+                     max_parallelism: nil,
+                     readonly: false,
+                     scan_wait: nil,
+                     scan_cap: nil,
+                     pipeline_cap: nil,
+                     pipeline_batch: nil,
+                     metrics: nil,
+                     profile: :off,
+                     flex_index: nil,
+                     scope_qualifier: nil,
+                     scan_consistency: :not_bounded,
+                     mutation_state: nil,
+                     transcoder: JsonTranscoder.new,
+                     positional_parameters: nil,
+                     named_parameters: nil,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        raise ArgumentError, "Cannot pass positional and named parameters at the same time" if positional_parameters && named_parameters
+
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @adhoc = adhoc
+        @client_context_id = client_context_id
+        @max_parallelism = max_parallelism
+        @readonly = readonly
+        @scan_wait = scan_wait
+        @scan_cap = scan_cap
+        @pipeline_cap = pipeline_cap
+        @pipeline_batch = pipeline_batch
+        @metrics = metrics
+        @profile = profile
+        @flex_index = flex_index
+        @scope_qualifier = scope_qualifier
+        @scan_consistency = scan_consistency
+        @mutation_state = mutation_state
+        @transcoder = transcoder
+        @positional_parameters = positional_parameters
+        @named_parameters = named_parameters
+        @raw_parameters = {}
+        yield self if block_given?
+      end
+
+      # Allows providing custom JSON key/value pairs for advanced usage
+      #
+      # @param [String] key the parameter name (key of the JSON property)
+      # @param [Object] value the parameter value (value of the JSON property)
+      def raw(key, value)
+        @raw_parameters[key] = JSON.generate(value)
+      end
+
+      # Customizes the consistency guarantees for this query
+      #
+      # @note overrides consistency level set by {#consistent_with}
+      #
+      # [+:not_bounded+] The indexer will return whatever state it has to the query engine at the time of query. This is the default (for
+      #   single-statement requests).
+      #
+      # [+:request_plus+] The indexer will wait until all mutations have been processed at the time of request before returning to the query
+      #   engine.
+      #
+      # @param [:not_bounded, :request_plus] level the index scan consistency to be used for this query
+      def scan_consistency=(level)
+        @mutation_state = nil if @mutation_state
+        @scan_consistency = level
+      end
+
+      # Sets the mutation tokens this query should be consistent with
+      #
+      # @note overrides consistency level set by {#scan_consistency=}
+      #
+      # @param [MutationState] mutation_state the mutation state containing the mutation tokens
+      def consistent_with(mutation_state)
+        @scan_consistency = nil if @scan_consistency
+        @mutation_state = mutation_state
+      end
+
+      # Sets positional parameters for the query
+      #
+      # @param [Array] positional the list of parameters that have to be substituted in the statement
+      def positional_parameters(positional)
+        @positional_parameters = positional
+        @named_parameters = nil
+      end
+
+      # @api private
+      # @return [Array<String>, nil]
+      def export_positional_parameters
+        @positional_parameters&.map { |p| JSON.dump(p) }
+      end
+
+      # Sets named parameters for the query
+      #
+      # @param [Hash] named the key/value map of the parameters to substitute in the statement
+      def named_parameters(named)
+        @named_parameters = named
+        @positional_parameters = nil
+      end
+
+      # @api private
+      # @return [Hash<String => String>, nil]
+      def export_named_parameters
+        @named_parameters&.each_with_object({}) { |(n, v), o| o[n.to_s] = JSON.dump(v) }
+      end
+
+      # @api private
+      # @return [MutationState]
+      attr_reader :mutation_state
+
+      # @api private
+      # @return [Hash<String => #to_json>]
+      attr_reader :raw_parameters
+
+      # @api private
+      def to_backend(scope_name: nil, bucket_name: nil)
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          adhoc: @adhoc,
+          client_context_id: @client_context_id,
+          max_parallelism: @max_parallelism,
+          readonly: @readonly,
+          flex_index: @flex_index,
+          scan_wait: @scan_wait.respond_to?(:in_milliseconds) ? @scan_wait.public_send(:in_milliseconds) : @scan_wait,
+          scan_cap: @scan_cap,
+          pipeline_batch: @pipeline_batch,
+          pipeline_cap: @pipeline_cap,
+          metrics: @metrics,
+          profile: @profile,
+          positional_parameters: export_positional_parameters,
+          named_parameters: export_named_parameters,
+          raw_parameters: @raw_parameters,
+          scan_consistency: @scan_consistency,
+          mutation_state: @mutation_state&.to_a,
+          scope_qualifier: @scope_qualifier,
+          scope_name: scope_name,
+          bucket_name: bucket_name,
+        }
+      end
+    end
+
+    # Options for {Couchbase::Cluster#search_query}
+    class Search < Base
+      attr_accessor :limit # @return [Integer]
+      attr_accessor :skip # @return [Integer]
+      attr_accessor :explain # @return [Boolean]
+      attr_accessor :highlight_style # @return [Symbol]
+      attr_accessor :highlight_fields # @return [Array<String>]
+      attr_accessor :fields # @return [Array<String>]
+      attr_accessor :disable_scoring # @return [Boolean]
+      attr_accessor :sort # @return [Array<String, Cluster::SearchSort>]
+      attr_accessor :facets # @return [Hash<String => Cluster::SearchFacet>]
+      attr_accessor :transcoder # @return [JsonTranscoder, #decode(String)]
+
+      # @param [Integer] limit limits the number of matches returned from the complete result set.
+      # @param [Integer] skip indicates how many matches are skipped on the result set before starting to return the
+      #   matches
+      # @param [Boolean] explain triggers inclusion of additional search result score explanations.
+      # @param [:html, :ansi, nil] highlight_style the style of highlighting in the result excerpts (if not specified,
+      #   the server default will be used)
+      # @param [Array<String>] highlight_fields list of the fields to highlight
+      # @param [Array<String>] fields list of field values which should be retrieved for result documents, provided they
+      #   were stored while indexing
+      # @param [MutationState] mutation_state the mutation tokens this query should be consistent with
+      # @param [Boolean] disable_scoring If set to true, the server will not perform any scoring on the hits
+      # @param [Array<String, Cluster::SearchSort>] sort Ordering rules to apply to the results. The list might contain
+      #   either strings or special objects, that derive from {Cluster::SearchSort}. In case of String, the value
+      #   represents the name of the field with optional +-+ in front of the name, which will turn on descending mode
+      #   for this field. One field is special is +"_score"+ which will sort results by their score. When nothing
+      #   specified, the Server will order results by their score descending, which is equivalent of +"-_score"+.
+      # @param [Hash<String => Cluster::SearchFacet>] facets facets allow to aggregate information collected on a
+      #   particular result set
+      # @param [JsonTranscoder, #decode(String)] transcoder to use for the results
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [Search] self
+      def initialize(limit: nil,
+                     skip: nil,
+                     explain: false,
+                     highlight_style: nil,
+                     highlight_fields: nil,
+                     fields: nil,
+                     mutation_state: nil,
+                     disable_scoring: false,
+                     sort: nil,
+                     facets: nil,
+                     transcoder: JsonTranscoder.new,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+        @limit = limit
+        @skip = skip
+        @explain = explain
+        @highlight_style = highlight_style
+        @highlight_fields = highlight_fields
+        @fields = fields
+        @disable_scoring = disable_scoring
+        @sort = sort
+        @facets = facets
+        @transcoder = transcoder
+        @scan_consistency = :not_bounded
+        @mutation_state = mutation_state
+        yield self if block_given?
+      end
+
+      # Sets the mutation tokens this query should be consistent with
+      #
+      # @note overrides consistency level set by {#scan_consistency=}
+      #
+      # @param [MutationState] mutation_state the mutation state containing the mutation tokens
+      #
+      # @return [void]
+      def consistent_with(mutation_state)
+        @scan_consistency = nil if @scan_consistency
+        @mutation_state = mutation_state
+      end
+
+      # Customizes the consistency guarantees for this query
+      #
+      # @note overrides consistency level set by {#consistent_with}
+      #
+      # @param [:not_bounded] level the scan consistency to be used for this query
+      #   +:not_bounded+:: The engine will return whatever state it has at the time of query
+      #
+      # @return [void]
+      def scan_consistency=(level)
+        @mutation_state = nil if @mutation_state
+        @scan_consistency = level
+      end
+
+      # @api private
+      # @return [MutationState]
+      attr_reader :mutation_state
+
+      # @api private
+      # @return [Symbol
+      attr_reader :scan_consistency
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          limit: @limit,
+          skip: @skip,
+          explain: @explain,
+          disable_scoring: @disable_scoring,
+          highlight_style: @highlight_style,
+          highlight_fields: @highlight_fields,
+          fields: @fields,
+          sort: @sort&.map { |v| JSON.generate(v) },
+          facets: @facets&.map { |(k, v)| [k, JSON.generate(v)] },
+          scan_consistency: @scan_consistency,
+          mutation_state: @mutation_state&.to_a,
+        }
+      end
+    end
+
+    # Options for {Couchbase::Cluster#view_query}
+    class View < Base
+      attr_accessor :scan_consistency # @return [Symbol]
+      attr_accessor :namespace # @return [Symbol]
+      attr_accessor :skip # @return [Integer]
+      attr_accessor :limit # @return [Integer]
+      attr_accessor :start_key # @return [#to_json, nil]
+      attr_accessor :end_key # @return [#to_json, nil]
+      attr_accessor :start_key_doc_id # @return [String, nil]
+      attr_accessor :end_key_doc_id # @return [String, nil]
+      attr_accessor :inclusive_end # @return [Boolean, nil]
+      attr_accessor :group # @return [Boolean, nil]
+      attr_accessor :group_level # @return [Integer, nil]
+      attr_accessor :key # @return [#to_json, nil]
+      attr_accessor :keys # @return [Array<#to_json>, nil]
+      attr_accessor :order # @return [Symbol, nil]
+      attr_accessor :reduce # @return [Boolean, nil]
+      attr_accessor :on_error # @return [Symbol, nil]
+      attr_accessor :debug # @return [Boolean, nil]
+
+      # @param [:not_bounded, :request_plus, :update_after] scan_consistency Specifies the level of consistency for the query
+      # @param [:production, :development] namespace
+      # @param [Integer, nil] skip Specifies the number of results to skip from the start of the result set
+      # @param [Integer, nil] limit Specifies the maximum number of results to return
+      # @param [#to_json, nil] start_key Specifies the key, to which the engine has to skip before result generation
+      # @param [#to_json, nil] end_key Specifies the key, at which the result generation has to be stopped
+      # @param [String, nil] start_key_doc_id Specifies the document id in case {#start_key} gives multiple results within the index
+      # @param [String, nil] end_key_doc_id Specifies the document id in case {#end_key} gives multiple results within the index
+      # @param [Boolean, nil] inclusive_end Specifies whether the {#end_key}/#{#end_key_doc_id} values should be inclusive
+      # @param [Boolean, nil] group Specifies whether to enable grouping of the results
+      # @param [Integer, nil] group_level Specifies the depth within the key to group the results
+      # @param [#to_json, nil] key Specifies the key to fetch from the index
+      # @param [Array<#to_json>, nil] keys Specifies set of the keys to fetch from the index
+      # @param [:ascending, :descending, nil] order Specifies the order of the results that should be returned
+      # @param [Boolean, nil] reduce Specifies whether to enable the reduction function associated with this particular
+      #   view index
+      # @param [:stop, :continue, nil] on_error Specifies the behaviour of the view engine should an error occur during
+      #   the gathering of view index results which would result in only partial results being available
+      # @param [Boolean, nil] debug allows to return debug information as part of the view response
+      #
+      # @param [Integer, #in_milliseconds, nil] timeout
+      # @param [Proc, nil] retry_strategy the custom retry strategy, if set
+      # @param [Hash, nil] client_context the client context data, if set
+      # @param [Span, nil] parent_span if set holds the parent span, that should be used for this request
+      #
+      # @yieldparam [View] self
+      def initialize(scan_consistency: :not_bounded,
+                     namespace: :production,
+                     skip: nil,
+                     limit: nil,
+                     start_key: nil,
+                     end_key: nil,
+                     start_key_doc_id: nil,
+                     end_key_doc_id: nil,
+                     inclusive_end: nil,
+                     group: nil,
+                     group_level: nil,
+                     key: nil,
+                     keys: nil,
+                     order: nil,
+                     reduce: nil,
+                     on_error: nil,
+                     debug: false,
+                     timeout: nil,
+                     retry_strategy: nil,
+                     client_context: nil,
+                     parent_span: nil)
+        super(timeout: timeout, retry_strategy: retry_strategy, client_context: client_context, parent_span: parent_span)
+
+        @scan_consistency = scan_consistency
+        @namespace = namespace
+        @skip = skip
+        @limit = limit
+        @start_key = start_key
+        @end_key = end_key
+        @start_key_doc_id = start_key_doc_id
+        @end_key_doc_id = end_key_doc_id
+        @inclusive_end = inclusive_end
+        @group = group
+        @group_level = group_level
+        @key = key
+        @keys = keys
+        @order = order
+        @reduce = reduce
+        @on_error = on_error
+        @debug = debug
+        yield self if block_given?
+      end
+
+      # Allows providing custom JSON key/value pairs for advanced usage
+      #
+      # @param [String] key the parameter name (key of the JSON property)
+      # @param [Object] value the parameter value (value of the JSON property)
+      def raw(key, value)
+        @raw_parameters[key] = JSON.generate(value)
+      end
+
+      # @api private
+      def to_backend
+        {
+          timeout: @timeout.respond_to?(:in_milliseconds) ? @timeout.public_send(:in_milliseconds) : @timeout,
+          scan_consistency: @scan_consistency,
+          skip: @skip,
+          limit: @limit,
+          start_key: (JSON.generate(@start_key) unless @start_key.nil?),
+          end_key: (JSON.generate(@end_key) unless @end_key.nil?),
+          start_key_doc_id: @start_key_doc_id,
+          end_key_doc_id: @end_key_doc_id,
+          inclusive_end: @inclusive_end,
+          group: @group,
+          group_level: @group_level,
+          key: (JSON.generate(@key) unless @key.nil?),
+          keys: @keys&.map { |key| JSON.generate(key) },
+          order: @order,
+          reduce: @reduce,
+          on_error: @on_error,
+          debug: @debug,
+        }
+      end
+    end
+
+    # @api private
+    # TODO: deprecate in 3.1
+    CommonOptions = ::Couchbase::Options::Base
+
+    # rubocop:disable Naming/MethodName constructor shortcuts
+    module_function
+
+    # Construct {Get} options for {Collection#get}
+    #
+    # @example Get partial document using projections
+    #   res = collection.get("customer123", Options::Get(projections: ["name", "addresses.billing"]))
+    #   res.content
+    #
+    #   # {"addresses"=>
+    #   #    {"billing"=>
+    #   #      {"country"=>"United Kingdom",
+    #   #       "line1"=>"123 Any Street",
+    #   #       "line2"=>"Anytown"}},
+    #   #   "name"=>"Douglas Reynholm"}
+    #
+    # @return [Get]
+    def Get(**args)
+      Get.new(**args)
+    end
+
+    # Construct {GetMulti} options for {Collection#get_multi}
+    #
+    # @example Fetch "foo" and "bar" in a batch
+    #   res = collection.get(["foo", "bar"], Options::GetMulti(timeout: 3_000))
+    #   res[0].content #=> content of "foo"
+    #   res[1].content #=> content of "bar"
+    #
+    # @return [GetMulti]
+    def GetMulti(**args)
+      GetMulti.new(**args)
+    end
+
+    # Construct {GetAndLock} options for {Collection#get_and_lock}
+    #
+    # @example Retrieve document and lock for 10 seconds
+    #   collection.get_and_lock("customer123", 10, Options::GetAndLock(timeout: 3_000))
+    #
+    # @return [GetAndLock]
+    def GetAndLock(**args)
+      GetAndLock.new(**args)
+    end
+
+    # Construct {GetAndTouch} options for {Collection#get_and_touch}
+    #
+    # @example Retrieve document and prolong its expiration for 10 seconds
+    #   collection.get_and_touch("customer123", 10, Options::GetAndTouch(timeout: 3_000))
+    #
+    # @return [GetAndTouch]
+    def GetAndTouch(**args)
+      GetAndTouch.new(**args)
+    end
+
+    # Construct {GetAllReplicas} options for {Collection#get_any_replica}
+    #
+    # @return [GetAllReplicas]
+    def GetAllReplicas(**args)
+      GetAllReplicas.new(**args)
+    end
+
+    # Construct {GetAnyReplica} options for {Collection#get_all_replicas}
+    #
+    # @return [GetAnyReplica]
+    def GetAnyReplica(**args)
+      GetAnyReplica.new(**args)
+    end
+
+    # Construct {Exists} options for {Collection#exists}
+    #
+    # @example Check if the document exists without fetching its contents
+    #   res = collection.exists("customer123", Options::Exists(timeout: 3_000))
+    #   res.exists? #=> true
+    #
+    # @return [Exists]
+    def Exists(**args)
+      Exists.new(**args)
+    end
+
+    # Construct {Touch} options for {Collection#touch}
+    #
+    # @example Reset expiration timer for document to 30 seconds (and use custom operation timeout)
+    #   res = collection.touch("customer123", 30, Options::Touch(timeout: 3_000))
+    #
+    # @return [Touch]
+    def Touch(**args)
+      Touch.new(**args)
+    end
+
+    # Construct {Unlock} options for {Collection#touch}
+    #
+    # @example Lock (pessimistically) and unlock document
+    #   res = collection.get_and_lock("customer123", 10, Options::Unlock(timeout: 3_000))
+    #   collection.unlock("customer123", res.cas)
+    #
+    # @return [Unlock]
+    def Unlock(**args)
+      Unlock.new(**args)
+    end
+
+    # Construct {Remove} options for {Collection#remove}
+    #
+    # @example Remove the document in collection, but apply optimistic lock
+    #   res = collection.upsert("mydoc", {"foo" => 42})
+    #   res.cas #=> 7751414725654
+    #
+    #   begin
+    #     res = collection.remove("customer123", Options::Remove(cas: 3735928559))
+    #   rescue Error::CasMismatch
+    #     puts "Failed to remove the document, it might be changed by other application"
+    #   end
+    #
+    # @return [Remove]
+    def Remove(**args)
+      Remove.new(**args)
+    end
+
+    # Construct {RemoveMulti} options for {Collection#remove_multi}
+    #
+    # @example Remove two documents in collection. For "mydoc" apply optimistic lock
+    #   res = collection.upsert("mydoc", {"foo" => 42})
+    #   res.cas #=> 7751414725654
+    #
+    #   res = collection.remove_multi(["foo", ["mydoc", res.cas]], Options::RemoveMulti(timeout: 3_000))
+    #   if res[1].error.is_a?(Error::CasMismatch)
+    #     puts "Failed to remove the document, it might be changed by other application"
+    #   end
+    #
+    # @return [RemoveMulti]
+    def RemoveMulti(**args)
+      RemoveMulti.new(**args)
+    end
+
+    # Construct {Insert} options for {Collection#insert}
+    #
+    # @example Insert new document in collection
+    #   res = collection.insert("mydoc", {"foo" => 42}, Options::Insert(expiry: 20))
+    #   res.cas #=> 242287264414742
+    #
+    # @return [Insert]
+    def Insert(**args)
+      Insert.new(**args)
+    end
+
+    # Construct {Upsert} options for {Collection#upsert}
+    #
+    # @example Upsert new document in collection
+    #   res = collection.upsert("mydoc", {"foo" => 42}, Options::Upsert(expiry: 20))
+    #   res.cas #=> 242287264414742
+    #
+    # @return [Upsert]
+    def Upsert(**args)
+      Upsert.new(**args)
+    end
+
+    # Construct {UpsertMulti} options for {Collection#upsert_multi}
+    #
+    # @example Upsert two documents with IDs "foo" and "bar" into a collection with expiration 20 seconds.
+    #   res = collection.upsert_multi([
+    #     "foo", {"foo" => 42},
+    #     "bar", {"bar" => "some value"}
+    #   ], Options::UpsertMulti(expiry: 20))
+    #   res[0].cas #=> 7751414725654
+    #   res[1].cas #=> 7751418925851
+    #
+    # @return [UpsertMulti]
+    def UpsertMulti(**args)
+      UpsertMulti.new(**args)
+    end
+
+    # Construct {Replace} options for {Collection#replace}
+    #
+    # @example Replace new document in collection with optimistic locking
+    #   res = collection.get("mydoc")
+    #   res = collection.replace("mydoc", {"foo" => 42}, Options::Replace(cas: res.cas))
+    #   res.cas #=> 242287264414742
+    #
+    # @return [Replace]
+    def Replace(**args)
+      Replace.new(**args)
+    end
+
+    # Construct {MutateIn} options for {Collection#mutate_in}
+    #
+    # @example Append number into subarray of the document
+    #   mutation_specs = [
+    #     MutateInSpec::array_append("purchases.complete", [42])
+    #   ]
+    #   collection.mutate_in("customer123", mutation_specs, Options::MutateIn(expiry: 10))
+    #
+    # @return [MutateIn]
+    def MutateIn(**args)
+      MutateIn.new(**args)
+    end
+
+    # Construct {LookupIn} options for {Collection#lookup_in}
+    #
+    # @example Get list of IDs of completed purchases
+    #   lookup_specs = [
+    #     LookupInSpec::get("purchases.complete")
+    #   ]
+    #   collection.lookup_in("customer123", lookup_specs, Options::LookupIn(timeout: 3_000))
+    #
+    # @return [LookupIn]
+    def LookupIn(**args)
+      LookupIn.new(**args)
+    end
+
+    # Construct {Append} options for {BinaryCollection#append}
+    #
+    # @example Append "bar" to the content of the existing document
+    #   collection.upsert("mydoc", "foo")
+    #   collection.binary.append("mydoc", "bar", Options::Append(timeout: 3_000))
+    #   collection.get("mydoc", Options::Get(transcoder: nil)).content #=> "foobar"
+    #
+    # @return [Append]
+    def Append(**args)
+      Append.new(**args)
+    end
+
+    # Construct {Prepend} options for {BinaryCollection#prepend}
+    #
+    # @example Prepend "bar" to the content of the existing document
+    #   collection.upsert("mydoc", "foo")
+    #   collection.binary.prepend("mydoc", "bar", Options::Prepend(timeout: 3_000))
+    #   collection.get("mydoc", Options::Get(transcoder: nil)).content #=> "barfoo"
+    #
+    # @return [Prepend]
+    def Prepend(**args)
+      Prepend.new(**args)
+    end
+
+    # Construct {Diagnostics} options for {Cluster#diagnostics}
+    #
+    # @return [Diagnostics]
+    def Diagnostics(**args)
+      Diagnostics.new(**args)
+    end
+
+    # Construct {Ping} options for {Bucket#ping}
+    #
+    # @return [Ping]
+    def Ping(**args)
+      Ping.new(**args)
+    end
+
+    # Construct {Cluster} options for {Cluster.connect}
+    #
+    # @example Pass authenticator object to Options
+    #   Cluster.connect("couchbase://localhost",
+    #     Options::Cluster(authenticator: PasswordAuthenticator.new("Administrator", "password")))
+    #
+    # @example Shorter version, more useful for interactive sessions
+    #   Cluster.connect("couchbase://localhost", "Administrator", "password")
+    #
+    # @example Authentication with TLS client certificate (note +couchbases://+ schema)
+    #   Cluster.connect("couchbases://localhost?trust_certificate=/tmp/ca.pem",
+    #     Options::Cluster(authenticator: CertificateAuthenticator.new("/tmp/certificate.pem", "/tmp/private.key")))
+    #
+    # @see https://docs.couchbase.com/server/current/manage/manage-security/configure-client-certificates.html
+    #
+    # @return [Cluster]
+    def Cluster(**args)
+      Cluster.new(**args)
+    end
+
+    # Construct {Increment} options for {BinaryCollection#increment}
+    #
+    # @example Increment value by 10, and initialize to 0 if it does not exist
+    #   res = collection.binary.increment("raw_counter", Options::Increment(delta: 10, initial: 0))
+    #   res.content #=> 0
+    #   res = collection.binary.increment("raw_counter", Options::Increment(delta: 10, initial: 0))
+    #   res.content #=> 10
+    #
+    # @return [Increment]
+    def Increment(**args)
+      Increment.new(**args)
+    end
+
+    # Construct {Decrement} options for {BinaryCollection#decrement}
+    #
+    # @example Decrement value by 2, and initialize to 100 if it does not exist
+    #   res = collection.binary.decrement("raw_counter", Options::Decrement(delta: 2, initial: 100))
+    #   res.value #=> 100
+    #   res = collection.binary.decrement("raw_counter", Options::Decrement(delta: 2, initial: 100))
+    #   res.value #=> 98
+    #
+    # @return [Decrement]
+    def Decrement(**args)
+      Decrement.new(**args)
+    end
+
+    # Construct {Analytics} options for {Cluster#analytics_query}
+    #
+    # @example Select name of the given user
+    #   cluster.analytics_query("SELECT u.name AS uname FROM GleambookUsers u WHERE u.id = $user_id ",
+    #                           Options::Analytics(named_parameters: {user_id: 2}))
+    #
+    # @return [Analytics]
+    def Analytics(**args)
+      Analytics.new(**args)
+    end
+
+    # Construct {Query} options for {Cluster#query}
+    #
+    # @example Select first ten hotels from travel sample dataset
+    #   cluster.query("SELECT * FROM `travel-sample` WHERE type = $type LIMIT 10",
+    #                 Options::Query(named_parameters: {type: "hotel"}, metrics: true))
+    #
+    # @return [Query]
+    def Query(**args)
+      Query.new(**args)
+    end
+
+    # Construct {Search} options for {Cluster#search_query}
+    #
+    # @example Return first 10 results of "hop beer" query and request highlighting
+    #   cluster.search_query("beer_index", Cluster::SearchQuery.match_phrase("hop beer"),
+    #                        Options::Search(
+    #                          limit: 10,
+    #                          fields: %w[name],
+    #                          highlight_style: :html,
+    #                          highlight_fields: %w[name description]
+    #                        ))
+    #
+    # @return [Search]
+    def Search(**args)
+      Search.new(**args)
+    end
+
+    # Construct {View} options for {Bucket#view_query}
+    #
+    # @example Make sure the view engine catch up with all mutations and return keys starting from +["random_brewery:"]+
+    #   bucket.view_query("beer", "brewery_beers",
+    #                     Options::View(
+    #                       start_key: ["random_brewery:"],
+    #                       scan_consistency: :request_plus
+    #                     ))
+    #
+    # @return [View]
+    def View(**args)
+      View.new(**args)
+    end
+
+    # rubocop:enable Naming/MethodName
+  end
+end