couchbase 3.0.0-universal-darwin-19 → 3.0.1-universal-darwin-19

data/ext/third_party/snappy/snappy_compress_fuzzer.cc

@@ -1,60 +0,0 @@
-// Copyright 2019 Google Inc. All Rights Reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-// libFuzzer harness for fuzzing snappy compression code.
-
-#include <stddef.h>
-#include <stdint.h>
-
-#include <cassert>
-#include <string>
-
-#include "snappy.h"
-
-// Entry point for LibFuzzer.
-extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
-  std::string input(reinterpret_cast<const char*>(data), size);
-
-  std::string compressed;
-  size_t compressed_size =
-      snappy::Compress(input.data(), input.size(), &compressed);
-
-  (void)compressed_size;  // Variable only used in debug builds.
-  assert(compressed_size == compressed.size());
-  assert(compressed.size() <= snappy::MaxCompressedLength(input.size()));
-  assert(snappy::IsValidCompressedBuffer(compressed.data(), compressed.size()));
-
-  std::string uncompressed_after_compress;
-  bool uncompress_succeeded = snappy::Uncompress(
-      compressed.data(), compressed.size(), &uncompressed_after_compress);
-
-  (void)uncompress_succeeded;  // Variable only used in debug builds.
-  assert(uncompress_succeeded);
-  assert(input == uncompressed_after_compress);
-  return 0;
-}

data/ext/third_party/snappy/snappy_uncompress_fuzzer.cc

@@ -1,58 +0,0 @@
-// Copyright 2019 Google Inc. All Rights Reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-// libFuzzer harness for fuzzing snappy's decompression code.
-
-#include <stddef.h>
-#include <stdint.h>
-
-#include <cassert>
-#include <string>
-
-#include "snappy.h"
-
-// Entry point for LibFuzzer.
-extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
-  std::string input(reinterpret_cast<const char*>(data), size);
-
-  // Avoid self-crafted decompression bombs.
-  size_t uncompressed_size;
-  constexpr size_t kMaxUncompressedSize = 1 << 20;
-  bool get_uncompressed_length_succeeded = snappy::GetUncompressedLength(
-      input.data(), input.size(), &uncompressed_size);
-  if (!get_uncompressed_length_succeeded ||
-      (uncompressed_size > kMaxUncompressedSize)) {
-    return 0;
-  }
-
-  std::string uncompressed;
-  // The return value of snappy::Uncompress() is ignored because decompression
-  // will fail on invalid inputs.
-  snappy::Uncompress(input.data(), input.size(), &uncompressed);
-  return 0;
-}

data/ext/third_party/snappy/snappy_unittest.cc

@@ -1,1512 +0,0 @@
-// Copyright 2005 and onwards Google Inc.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <cmath>
-#include <cstdlib>
-
-#include <algorithm>
-#include <random>
-#include <string>
-#include <utility>
-#include <vector>
-
-#include "snappy.h"
-#include "snappy-internal.h"
-#include "snappy-test.h"
-#include "snappy-sinksource.h"
-
-DEFINE_int32(start_len, -1,
-             "Starting prefix size for testing (-1: just full file contents)");
-DEFINE_int32(end_len, -1,
-             "Starting prefix size for testing (-1: just full file contents)");
-DEFINE_int32(bytes, 10485760,
-             "How many bytes to compress/uncompress per file for timing");
-
-DEFINE_bool(zlib, false,
-            "Run zlib compression (http://www.zlib.net)");
-DEFINE_bool(lzo, false,
-            "Run LZO compression (http://www.oberhumer.com/opensource/lzo/)");
-DEFINE_bool(snappy, true, "Run snappy compression");
-
-DEFINE_bool(write_compressed, false,
-            "Write compressed versions of each file to <file>.comp");
-DEFINE_bool(write_uncompressed, false,
-            "Write uncompressed versions of each file to <file>.uncomp");
-
-DEFINE_bool(snappy_dump_decompression_table, false,
-            "If true, we print the decompression table during tests.");
-
-namespace snappy {
-
-#if defined(HAVE_FUNC_MMAP) && defined(HAVE_FUNC_SYSCONF)
-
-// To test against code that reads beyond its input, this class copies a
-// string to a newly allocated group of pages, the last of which
-// is made unreadable via mprotect. Note that we need to allocate the
-// memory with mmap(), as POSIX allows mprotect() only on memory allocated
-// with mmap(), and some malloc/posix_memalign implementations expect to
-// be able to read previously allocated memory while doing heap allocations.
-class DataEndingAtUnreadablePage {
- public:
-  explicit DataEndingAtUnreadablePage(const std::string& s) {
-    const size_t page_size = sysconf(_SC_PAGESIZE);
-    const size_t size = s.size();
-    // Round up space for string to a multiple of page_size.
-    size_t space_for_string = (size + page_size - 1) & ~(page_size - 1);
-    alloc_size_ = space_for_string + page_size;
-    mem_ = mmap(NULL, alloc_size_,
-                PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
-    CHECK_NE(MAP_FAILED, mem_);
-    protected_page_ = reinterpret_cast<char*>(mem_) + space_for_string;
-    char* dst = protected_page_ - size;
-    std::memcpy(dst, s.data(), size);
-    data_ = dst;
-    size_ = size;
-    // Make guard page unreadable.
-    CHECK_EQ(0, mprotect(protected_page_, page_size, PROT_NONE));
-  }
-
-  ~DataEndingAtUnreadablePage() {
-    const size_t page_size = sysconf(_SC_PAGESIZE);
-    // Undo the mprotect.
-    CHECK_EQ(0, mprotect(protected_page_, page_size, PROT_READ|PROT_WRITE));
-    CHECK_EQ(0, munmap(mem_, alloc_size_));
-  }
-
-  const char* data() const { return data_; }
-  size_t size() const { return size_; }
-
- private:
-  size_t alloc_size_;
-  void* mem_;
-  char* protected_page_;
-  const char* data_;
-  size_t size_;
-};
-
-#else  // defined(HAVE_FUNC_MMAP) && defined(HAVE_FUNC_SYSCONF)
-
-// Fallback for systems without mmap.
-using DataEndingAtUnreadablePage = std::string;
-
-#endif
-
-enum CompressorType {
-  ZLIB, LZO, SNAPPY
-};
-
-const char* names[] = {
-  "ZLIB", "LZO", "SNAPPY"
-};
-
-static size_t MinimumRequiredOutputSpace(size_t input_size,
-                                         CompressorType comp) {
-  switch (comp) {
-#ifdef ZLIB_VERSION
-    case ZLIB:
-      return ZLib::MinCompressbufSize(input_size);
-#endif  // ZLIB_VERSION
-
-#ifdef LZO_VERSION
-    case LZO:
-      return input_size + input_size/64 + 16 + 3;
-#endif  // LZO_VERSION
-
-    case SNAPPY:
-      return snappy::MaxCompressedLength(input_size);
-
-    default:
-      LOG(FATAL) << "Unknown compression type number " << comp;
-      return 0;
-  }
-}
-
-// Returns true if we successfully compressed, false otherwise.
-//
-// If compressed_is_preallocated is set, do not resize the compressed buffer.
-// This is typically what you want for a benchmark, in order to not spend
-// time in the memory allocator. If you do set this flag, however,
-// "compressed" must be preinitialized to at least MinCompressbufSize(comp)
-// number of bytes, and may contain junk bytes at the end after return.
-static bool Compress(const char* input, size_t input_size, CompressorType comp,
-                     std::string* compressed, bool compressed_is_preallocated) {
-  if (!compressed_is_preallocated) {
-    compressed->resize(MinimumRequiredOutputSpace(input_size, comp));
-  }
-
-  switch (comp) {
-#ifdef ZLIB_VERSION
-    case ZLIB: {
-      ZLib zlib;
-      uLongf destlen = compressed->size();
-      int ret = zlib.Compress(
-          reinterpret_cast<Bytef*>(string_as_array(compressed)),
-          &destlen,
-          reinterpret_cast<const Bytef*>(input),
-          input_size);
-      CHECK_EQ(Z_OK, ret);
-      if (!compressed_is_preallocated) {
-        compressed->resize(destlen);
-      }
-      return true;
-    }
-#endif  // ZLIB_VERSION
-
-#ifdef LZO_VERSION
-    case LZO: {
-      unsigned char* mem = new unsigned char[LZO1X_1_15_MEM_COMPRESS];
-      lzo_uint destlen;
-      int ret = lzo1x_1_15_compress(
-          reinterpret_cast<const uint8_t*>(input),
-          input_size,
-          reinterpret_cast<uint8_t*>(string_as_array(compressed)),
-          &destlen,
-          mem);
-      CHECK_EQ(LZO_E_OK, ret);
-      delete[] mem;
-      if (!compressed_is_preallocated) {
-        compressed->resize(destlen);
-      }
-      break;
-    }
-#endif  // LZO_VERSION
-
-    case SNAPPY: {
-      size_t destlen;
-      snappy::RawCompress(input, input_size,
-                          string_as_array(compressed),
-                          &destlen);
-      CHECK_LE(destlen, snappy::MaxCompressedLength(input_size));
-      if (!compressed_is_preallocated) {
-        compressed->resize(destlen);
-      }
-      break;
-    }
-
-    default: {
-      return false;     // the asked-for library wasn't compiled in
-    }
-  }
-  return true;
-}
-
-static bool Uncompress(const std::string& compressed, CompressorType comp,
-                       int size, std::string* output) {
-  switch (comp) {
-#ifdef ZLIB_VERSION
-    case ZLIB: {
-      output->resize(size);
-      ZLib zlib;
-      uLongf destlen = output->size();
-      int ret = zlib.Uncompress(
-          reinterpret_cast<Bytef*>(string_as_array(output)),
-          &destlen,
-          reinterpret_cast<const Bytef*>(compressed.data()),
-          compressed.size());
-      CHECK_EQ(Z_OK, ret);
-      CHECK_EQ(static_cast<uLongf>(size), destlen);
-      break;
-    }
-#endif  // ZLIB_VERSION
-
-#ifdef LZO_VERSION
-    case LZO: {
-      output->resize(size);
-      lzo_uint destlen;
-      int ret = lzo1x_decompress(
-          reinterpret_cast<const uint8_t*>(compressed.data()),
-          compressed.size(),
-          reinterpret_cast<uint8_t*>(string_as_array(output)),
-          &destlen,
-          NULL);
-      CHECK_EQ(LZO_E_OK, ret);
-      CHECK_EQ(static_cast<lzo_uint>(size), destlen);
-      break;
-    }
-#endif  // LZO_VERSION
-
-    case SNAPPY: {
-      snappy::RawUncompress(compressed.data(), compressed.size(),
-                            string_as_array(output));
-      break;
-    }
-
-    default: {
-      return false;     // the asked-for library wasn't compiled in
-    }
-  }
-  return true;
-}
-
-static void Measure(const char* data,
-                    size_t length,
-                    CompressorType comp,
-                    int repeats,
-                    int block_size) {
-  // Run tests a few time and pick median running times
-  static const int kRuns = 5;
-  double ctime[kRuns];
-  double utime[kRuns];
-  int compressed_size = 0;
-
-  {
-    // Chop the input into blocks
-    int num_blocks = (length + block_size - 1) / block_size;
-    std::vector<const char*> input(num_blocks);
-    std::vector<size_t> input_length(num_blocks);
-    std::vector<std::string> compressed(num_blocks);
-    std::vector<std::string> output(num_blocks);
-    for (int b = 0; b < num_blocks; ++b) {
-      int input_start = b * block_size;
-      int input_limit = std::min<int>((b+1)*block_size, length);
-      input[b] = data+input_start;
-      input_length[b] = input_limit-input_start;
-    }
-
-    // Pre-grow the output buffers so we don't measure string append time.
-    for (std::string& compressed_block : compressed) {
-      compressed_block.resize(MinimumRequiredOutputSpace(block_size, comp));
-    }
-
-    // First, try one trial compression to make sure the code is compiled in
-    if (!Compress(input[0], input_length[0], comp, &compressed[0], true)) {
-      LOG(WARNING) << "Skipping " << names[comp] << ": "
-                   << "library not compiled in";
-      return;
-    }
-
-    for (int run = 0; run < kRuns; ++run) {
-      CycleTimer ctimer, utimer;
-
-      // Pre-grow the output buffers so we don't measure string append time.
-      for (std::string& compressed_block : compressed) {
-        compressed_block.resize(MinimumRequiredOutputSpace(block_size, comp));
-      }
-
-      ctimer.Start();
-      for (int b = 0; b < num_blocks; ++b) {
-        for (int i = 0; i < repeats; ++i)
-          Compress(input[b], input_length[b], comp, &compressed[b], true);
-      }
-      ctimer.Stop();
-
-      // Compress once more, with resizing, so we don't leave junk
-      // at the end that will confuse the decompressor.
-      for (int b = 0; b < num_blocks; ++b) {
-        Compress(input[b], input_length[b], comp, &compressed[b], false);
-      }
-
-      for (int b = 0; b < num_blocks; ++b) {
-        output[b].resize(input_length[b]);
-      }
-
-      utimer.Start();
-      for (int i = 0; i < repeats; ++i) {
-        for (int b = 0; b < num_blocks; ++b)
-          Uncompress(compressed[b], comp, input_length[b], &output[b]);
-      }
-      utimer.Stop();
-
-      ctime[run] = ctimer.Get();
-      utime[run] = utimer.Get();
-    }
-
-    compressed_size = 0;
-    for (const std::string& compressed_item : compressed) {
-      compressed_size += compressed_item.size();
-    }
-  }
-
-  std::sort(ctime, ctime + kRuns);
-  std::sort(utime, utime + kRuns);
-  const int med = kRuns/2;
-
-  float comp_rate = (length / ctime[med]) * repeats / 1048576.0;
-  float uncomp_rate = (length / utime[med]) * repeats / 1048576.0;
-  std::string x = names[comp];
-  x += ":";
-  std::string urate = (uncomp_rate >= 0) ? StrFormat("%.1f", uncomp_rate)
-                                         : std::string("?");
-  std::printf("%-7s [b %dM] bytes %6d -> %6d %4.1f%%  "
-              "comp %5.1f MB/s  uncomp %5s MB/s\n",
-              x.c_str(),
-              block_size/(1<<20),
-              static_cast<int>(length), static_cast<uint32_t>(compressed_size),
-              (compressed_size * 100.0) / std::max<int>(1, length),
-              comp_rate,
-              urate.c_str());
-}
-
-static int VerifyString(const std::string& input) {
-  std::string compressed;
-  DataEndingAtUnreadablePage i(input);
-  const size_t written = snappy::Compress(i.data(), i.size(), &compressed);
-  CHECK_EQ(written, compressed.size());
-  CHECK_LE(compressed.size(),
-           snappy::MaxCompressedLength(input.size()));
-  CHECK(snappy::IsValidCompressedBuffer(compressed.data(), compressed.size()));
-
-  std::string uncompressed;
-  DataEndingAtUnreadablePage c(compressed);
-  CHECK(snappy::Uncompress(c.data(), c.size(), &uncompressed));
-  CHECK_EQ(uncompressed, input);
-  return uncompressed.size();
-}
-
-static void VerifyStringSink(const std::string& input) {
-  std::string compressed;
-  DataEndingAtUnreadablePage i(input);
-  const size_t written = snappy::Compress(i.data(), i.size(), &compressed);
-  CHECK_EQ(written, compressed.size());
-  CHECK_LE(compressed.size(),
-           snappy::MaxCompressedLength(input.size()));
-  CHECK(snappy::IsValidCompressedBuffer(compressed.data(), compressed.size()));
-
-  std::string uncompressed;
-  uncompressed.resize(input.size());
-  snappy::UncheckedByteArraySink sink(string_as_array(&uncompressed));
-  DataEndingAtUnreadablePage c(compressed);
-  snappy::ByteArraySource source(c.data(), c.size());
-  CHECK(snappy::Uncompress(&source, &sink));
-  CHECK_EQ(uncompressed, input);
-}
-
-static void VerifyIOVec(const std::string& input) {
-  std::string compressed;
-  DataEndingAtUnreadablePage i(input);
-  const size_t written = snappy::Compress(i.data(), i.size(), &compressed);
-  CHECK_EQ(written, compressed.size());
-  CHECK_LE(compressed.size(),
-           snappy::MaxCompressedLength(input.size()));
-  CHECK(snappy::IsValidCompressedBuffer(compressed.data(), compressed.size()));
-
-  // Try uncompressing into an iovec containing a random number of entries
-  // ranging from 1 to 10.
-  char* buf = new char[input.size()];
-  std::minstd_rand0 rng(input.size());
-  std::uniform_int_distribution<size_t> uniform_1_to_10(1, 10);
-  size_t num = uniform_1_to_10(rng);
-  if (input.size() < num) {
-    num = input.size();
-  }
-  struct iovec* iov = new iovec[num];
-  size_t used_so_far = 0;
-  std::bernoulli_distribution one_in_five(1.0 / 5);
-  for (size_t i = 0; i < num; ++i) {
-    assert(used_so_far < input.size());
-    iov[i].iov_base = buf + used_so_far;
-    if (i == num - 1) {
-      iov[i].iov_len = input.size() - used_so_far;
-    } else {
-      // Randomly choose to insert a 0 byte entry.
-      if (one_in_five(rng)) {
-        iov[i].iov_len = 0;
-      } else {
-        std::uniform_int_distribution<size_t> uniform_not_used_so_far(
-            0, input.size() - used_so_far - 1);
-        iov[i].iov_len = uniform_not_used_so_far(rng);
-      }
-    }
-    used_so_far += iov[i].iov_len;
-  }
-  CHECK(snappy::RawUncompressToIOVec(
-      compressed.data(), compressed.size(), iov, num));
-  CHECK(!memcmp(buf, input.data(), input.size()));
-  delete[] iov;
-  delete[] buf;
-}
-
-// Test that data compressed by a compressor that does not
-// obey block sizes is uncompressed properly.
-static void VerifyNonBlockedCompression(const std::string& input) {
-  if (input.length() > snappy::kBlockSize) {
-    // We cannot test larger blocks than the maximum block size, obviously.
-    return;
-  }
-
-  std::string prefix;
-  Varint::Append32(&prefix, input.size());
-
-  // Setup compression table
-  snappy::internal::WorkingMemory wmem(input.size());
-  int table_size;
-  uint16_t* table = wmem.GetHashTable(input.size(), &table_size);
-
-  // Compress entire input in one shot
-  std::string compressed;
-  compressed += prefix;
-  compressed.resize(prefix.size()+snappy::MaxCompressedLength(input.size()));
-  char* dest = string_as_array(&compressed) + prefix.size();
-  char* end = snappy::internal::CompressFragment(input.data(), input.size(),
-                                                dest, table, table_size);
-  compressed.resize(end - compressed.data());
-
-  // Uncompress into std::string
-  std::string uncomp_str;
-  CHECK(snappy::Uncompress(compressed.data(), compressed.size(), &uncomp_str));
-  CHECK_EQ(uncomp_str, input);
-
-  // Uncompress using source/sink
-  std::string uncomp_str2;
-  uncomp_str2.resize(input.size());
-  snappy::UncheckedByteArraySink sink(string_as_array(&uncomp_str2));
-  snappy::ByteArraySource source(compressed.data(), compressed.size());
-  CHECK(snappy::Uncompress(&source, &sink));
-  CHECK_EQ(uncomp_str2, input);
-
-  // Uncompress into iovec
-  {
-    static const int kNumBlocks = 10;
-    struct iovec vec[kNumBlocks];
-    const int block_size = 1 + input.size() / kNumBlocks;
-    std::string iovec_data(block_size * kNumBlocks, 'x');
-    for (int i = 0; i < kNumBlocks; ++i) {
-      vec[i].iov_base = string_as_array(&iovec_data) + i * block_size;
-      vec[i].iov_len = block_size;
-    }
-    CHECK(snappy::RawUncompressToIOVec(compressed.data(), compressed.size(),
-                                       vec, kNumBlocks));
-    CHECK_EQ(std::string(iovec_data.data(), input.size()), input);
-  }
-}
-
-// Expand the input so that it is at least K times as big as block size
-static std::string Expand(const std::string& input) {
-  static const int K = 3;
-  std::string data = input;
-  while (data.size() < K * snappy::kBlockSize) {
-    data += input;
-  }
-  return data;
-}
-
-static int Verify(const std::string& input) {
-  VLOG(1) << "Verifying input of size " << input.size();
-
-  // Compress using string based routines
-  const int result = VerifyString(input);
-
-  // Verify using sink based routines
-  VerifyStringSink(input);
-
-  VerifyNonBlockedCompression(input);
-  VerifyIOVec(input);
-  if (!input.empty()) {
-    const std::string expanded = Expand(input);
-    VerifyNonBlockedCompression(expanded);
-    VerifyIOVec(input);
-  }
-
-  return result;
-}
-
-static bool IsValidCompressedBuffer(const std::string& c) {
-  return snappy::IsValidCompressedBuffer(c.data(), c.size());
-}
-static bool Uncompress(const std::string& c, std::string* u) {
-  return snappy::Uncompress(c.data(), c.size(), u);
-}
-
-// This test checks to ensure that snappy doesn't coredump if it gets
-// corrupted data.
-TEST(CorruptedTest, VerifyCorrupted) {
-  std::string source = "making sure we don't crash with corrupted input";
-  VLOG(1) << source;
-  std::string dest;
-  std::string uncmp;
-  snappy::Compress(source.data(), source.size(), &dest);
-
-  // Mess around with the data. It's hard to simulate all possible
-  // corruptions; this is just one example ...
-  CHECK_GT(dest.size(), 3);
-  dest[1]--;
-  dest[3]++;
-  // this really ought to fail.
-  CHECK(!IsValidCompressedBuffer(dest));
-  CHECK(!Uncompress(dest, &uncmp));
-
-  // This is testing for a security bug - a buffer that decompresses to 100k
-  // but we lie in the snappy header and only reserve 0 bytes of memory :)
-  source.resize(100000);
-  for (char& source_char : source) {
-    source_char = 'A';
-  }
-  snappy::Compress(source.data(), source.size(), &dest);
-  dest[0] = dest[1] = dest[2] = dest[3] = 0;
-  CHECK(!IsValidCompressedBuffer(dest));
-  CHECK(!Uncompress(dest, &uncmp));
-
-  if (sizeof(void *) == 4) {
-    // Another security check; check a crazy big length can't DoS us with an
-    // over-allocation.
-    // Currently this is done only for 32-bit builds.  On 64-bit builds,
-    // where 3 GB might be an acceptable allocation size, Uncompress()
-    // attempts to decompress, and sometimes causes the test to run out of
-    // memory.
-    dest[0] = dest[1] = dest[2] = dest[3] = '\xff';
-    // This decodes to a really large size, i.e., about 3 GB.
-    dest[4] = 'k';
-    CHECK(!IsValidCompressedBuffer(dest));
-    CHECK(!Uncompress(dest, &uncmp));
-  } else {
-    LOG(WARNING) << "Crazy decompression lengths not checked on 64-bit build";
-  }
-
-  // This decodes to about 2 MB; much smaller, but should still fail.
-  dest[0] = dest[1] = dest[2] = '\xff';
-  dest[3] = 0x00;
-  CHECK(!IsValidCompressedBuffer(dest));
-  CHECK(!Uncompress(dest, &uncmp));
-
-  // try reading stuff in from a bad file.
-  for (int i = 1; i <= 3; ++i) {
-    std::string data =
-        ReadTestDataFile(StrFormat("baddata%d.snappy", i).c_str(), 0);
-    std::string uncmp;
-    // check that we don't return a crazy length
-    size_t ulen;
-    CHECK(!snappy::GetUncompressedLength(data.data(), data.size(), &ulen)
-          || (ulen < (1<<20)));
-    uint32_t ulen2;
-    snappy::ByteArraySource source(data.data(), data.size());
-    CHECK(!snappy::GetUncompressedLength(&source, &ulen2) ||
-          (ulen2 < (1<<20)));
-    CHECK(!IsValidCompressedBuffer(data));
-    CHECK(!Uncompress(data, &uncmp));
-  }
-}
-
-// Helper routines to construct arbitrary compressed strings.
-// These mirror the compression code in snappy.cc, but are copied
-// here so that we can bypass some limitations in the how snappy.cc
-// invokes these routines.
-static void AppendLiteral(std::string* dst, const std::string& literal) {
-  if (literal.empty()) return;
-  int n = literal.size() - 1;
-  if (n < 60) {
-    // Fit length in tag byte
-    dst->push_back(0 | (n << 2));
-  } else {
-    // Encode in upcoming bytes
-    char number[4];
-    int count = 0;
-    while (n > 0) {
-      number[count++] = n & 0xff;
-      n >>= 8;
-    }
-    dst->push_back(0 | ((59+count) << 2));
-    *dst += std::string(number, count);
-  }
-  *dst += literal;
-}
-
-static void AppendCopy(std::string* dst, int offset, int length) {
-  while (length > 0) {
-    // Figure out how much to copy in one shot
-    int to_copy;
-    if (length >= 68) {
-      to_copy = 64;
-    } else if (length > 64) {
-      to_copy = 60;
-    } else {
-      to_copy = length;
-    }
-    length -= to_copy;
-
-    if ((to_copy >= 4) && (to_copy < 12) && (offset < 2048)) {
-      assert(to_copy-4 < 8);            // Must fit in 3 bits
-      dst->push_back(1 | ((to_copy-4) << 2) | ((offset >> 8) << 5));
-      dst->push_back(offset & 0xff);
-    } else if (offset < 65536) {
-      dst->push_back(2 | ((to_copy-1) << 2));
-      dst->push_back(offset & 0xff);
-      dst->push_back(offset >> 8);
-    } else {
-      dst->push_back(3 | ((to_copy-1) << 2));
-      dst->push_back(offset & 0xff);
-      dst->push_back((offset >> 8) & 0xff);
-      dst->push_back((offset >> 16) & 0xff);
-      dst->push_back((offset >> 24) & 0xff);
-    }
-  }
-}
-
-TEST(Snappy, SimpleTests) {
-  Verify("");
-  Verify("a");
-  Verify("ab");
-  Verify("abc");
-
-  Verify("aaaaaaa" + std::string(16, 'b') + std::string("aaaaa") + "abc");
-  Verify("aaaaaaa" + std::string(256, 'b') + std::string("aaaaa") + "abc");
-  Verify("aaaaaaa" + std::string(2047, 'b') + std::string("aaaaa") + "abc");
-  Verify("aaaaaaa" + std::string(65536, 'b') + std::string("aaaaa") + "abc");
-  Verify("abcaaaaaaa" + std::string(65536, 'b') + std::string("aaaaa") + "abc");
-}
-
-// Verify max blowup (lots of four-byte copies)
-TEST(Snappy, MaxBlowup) {
-  std::mt19937 rng;
-  std::uniform_int_distribution<int> uniform_byte(0, 255);
-  std::string input;
-  for (int i = 0; i < 80000; ++i)
-    input.push_back(static_cast<char>(uniform_byte(rng)));
-
-  for (int i = 0; i < 80000; i += 4) {
-    std::string four_bytes(input.end() - i - 4, input.end() - i);
-    input.append(four_bytes);
-  }
-  Verify(input);
-}
-
-TEST(Snappy, RandomData) {
-  std::minstd_rand0 rng(FLAGS_test_random_seed);
-  std::uniform_int_distribution<int> uniform_0_to_3(0, 3);
-  std::uniform_int_distribution<int> uniform_0_to_8(0, 8);
-  std::uniform_int_distribution<int> uniform_byte(0, 255);
-  std::uniform_int_distribution<size_t> uniform_4k(0, 4095);
-  std::uniform_int_distribution<size_t> uniform_64k(0, 65535);
-  std::bernoulli_distribution one_in_ten(1.0 / 10);
-
-  constexpr int num_ops = 20000;
-  for (int i = 0; i < num_ops; ++i) {
-    if ((i % 1000) == 0) {
-      VLOG(0) << "Random op " << i << " of " << num_ops;
-    }
-
-    std::string x;
-    size_t len = uniform_4k(rng);
-    if (i < 100) {
-      len = 65536 + uniform_64k(rng);
-    }
-    while (x.size() < len) {
-      int run_len = 1;
-      if (one_in_ten(rng)) {
-        int skewed_bits = uniform_0_to_8(rng);
-        // int is guaranteed to hold at least 16 bits, this uses at most 8 bits.
-        std::uniform_int_distribution<int> skewed_low(0,
-                                                      (1 << skewed_bits) - 1);
-        run_len = skewed_low(rng);
-      }
-      char c = static_cast<char>(uniform_byte(rng));
-      if (i >= 100) {
-        int skewed_bits = uniform_0_to_3(rng);
-        // int is guaranteed to hold at least 16 bits, this uses at most 3 bits.
-        std::uniform_int_distribution<int> skewed_low(0,
-                                                      (1 << skewed_bits) - 1);
-        c = static_cast<char>(skewed_low(rng));
-      }
-      while (run_len-- > 0 && x.size() < len) {
-        x.push_back(c);
-      }
-    }
-
-    Verify(x);
-  }
-}
-
-TEST(Snappy, FourByteOffset) {
-  // The new compressor cannot generate four-byte offsets since
-  // it chops up the input into 32KB pieces.  So we hand-emit the
-  // copy manually.
-
-  // The two fragments that make up the input string.
-  std::string fragment1 = "012345689abcdefghijklmnopqrstuvwxyz";
-  std::string fragment2 = "some other string";
-
-  // How many times each fragment is emitted.
-  const int n1 = 2;
-  const int n2 = 100000 / fragment2.size();
-  const size_t length = n1 * fragment1.size() + n2 * fragment2.size();
-
-  std::string compressed;
-  Varint::Append32(&compressed, length);
-
-  AppendLiteral(&compressed, fragment1);
-  std::string src = fragment1;
-  for (int i = 0; i < n2; ++i) {
-    AppendLiteral(&compressed, fragment2);
-    src += fragment2;
-  }
-  AppendCopy(&compressed, src.size(), fragment1.size());
-  src += fragment1;
-  CHECK_EQ(length, src.size());
-
-  std::string uncompressed;
-  CHECK(snappy::IsValidCompressedBuffer(compressed.data(), compressed.size()));
-  CHECK(snappy::Uncompress(compressed.data(), compressed.size(),
-                           &uncompressed));
-  CHECK_EQ(uncompressed, src);
-}
-
-TEST(Snappy, IOVecEdgeCases) {
-  // Test some tricky edge cases in the iovec output that are not necessarily
-  // exercised by random tests.
-
-  // Our output blocks look like this initially (the last iovec is bigger
-  // than depicted):
-  // [  ] [ ] [    ] [        ] [        ]
-  static const int kLengths[] = { 2, 1, 4, 8, 128 };
-
-  struct iovec iov[ARRAYSIZE(kLengths)];
-  for (int i = 0; i < ARRAYSIZE(kLengths); ++i) {
-    iov[i].iov_base = new char[kLengths[i]];
-    iov[i].iov_len = kLengths[i];
-  }
-
-  std::string compressed;
-  Varint::Append32(&compressed, 22);
-
-  // A literal whose output crosses three blocks.
-  // [ab] [c] [123 ] [        ] [        ]
-  AppendLiteral(&compressed, "abc123");
-
-  // A copy whose output crosses two blocks (source and destination
-  // segments marked).
-  // [ab] [c] [1231] [23      ] [        ]
-  //           ^--^   --
-  AppendCopy(&compressed, 3, 3);
-
-  // A copy where the input is, at first, in the block before the output:
-  //
-  // [ab] [c] [1231] [231231  ] [        ]
-  //           ^---     ^---
-  // Then during the copy, the pointers move such that the input and
-  // output pointers are in the same block:
-  //
-  // [ab] [c] [1231] [23123123] [        ]
-  //                  ^-    ^-
-  // And then they move again, so that the output pointer is no longer
-  // in the same block as the input pointer:
-  // [ab] [c] [1231] [23123123] [123     ]
-  //                    ^--      ^--
-  AppendCopy(&compressed, 6, 9);
-
-  // Finally, a copy where the input is from several blocks back,
-  // and it also crosses three blocks:
-  //
-  // [ab] [c] [1231] [23123123] [123b    ]
-  //   ^                            ^
-  // [ab] [c] [1231] [23123123] [123bc   ]
-  //       ^                         ^
-  // [ab] [c] [1231] [23123123] [123bc12 ]
-  //           ^-                     ^-
-  AppendCopy(&compressed, 17, 4);
-
-  CHECK(snappy::RawUncompressToIOVec(
-      compressed.data(), compressed.size(), iov, ARRAYSIZE(iov)));
-  CHECK_EQ(0, memcmp(iov[0].iov_base, "ab", 2));
-  CHECK_EQ(0, memcmp(iov[1].iov_base, "c", 1));
-  CHECK_EQ(0, memcmp(iov[2].iov_base, "1231", 4));
-  CHECK_EQ(0, memcmp(iov[3].iov_base, "23123123", 8));
-  CHECK_EQ(0, memcmp(iov[4].iov_base, "123bc12", 7));
-
-  for (int i = 0; i < ARRAYSIZE(kLengths); ++i) {
-    delete[] reinterpret_cast<char *>(iov[i].iov_base);
-  }
-}
-
-TEST(Snappy, IOVecLiteralOverflow) {
-  static const int kLengths[] = { 3, 4 };
-
-  struct iovec iov[ARRAYSIZE(kLengths)];
-  for (int i = 0; i < ARRAYSIZE(kLengths); ++i) {
-    iov[i].iov_base = new char[kLengths[i]];
-    iov[i].iov_len = kLengths[i];
-  }
-
-  std::string compressed;
-  Varint::Append32(&compressed, 8);
-
-  AppendLiteral(&compressed, "12345678");
-
-  CHECK(!snappy::RawUncompressToIOVec(
-      compressed.data(), compressed.size(), iov, ARRAYSIZE(iov)));
-
-  for (int i = 0; i < ARRAYSIZE(kLengths); ++i) {
-    delete[] reinterpret_cast<char *>(iov[i].iov_base);
-  }
-}
-
-TEST(Snappy, IOVecCopyOverflow) {
-  static const int kLengths[] = { 3, 4 };
-
-  struct iovec iov[ARRAYSIZE(kLengths)];
-  for (int i = 0; i < ARRAYSIZE(kLengths); ++i) {
-    iov[i].iov_base = new char[kLengths[i]];
-    iov[i].iov_len = kLengths[i];
-  }
-
-  std::string compressed;
-  Varint::Append32(&compressed, 8);
-
-  AppendLiteral(&compressed, "123");
-  AppendCopy(&compressed, 3, 5);
-
-  CHECK(!snappy::RawUncompressToIOVec(
-      compressed.data(), compressed.size(), iov, ARRAYSIZE(iov)));
-
-  for (int i = 0; i < ARRAYSIZE(kLengths); ++i) {
-    delete[] reinterpret_cast<char *>(iov[i].iov_base);
-  }
-}
-
-static bool CheckUncompressedLength(const std::string& compressed,
-                                    size_t* ulength) {
-  const bool result1 = snappy::GetUncompressedLength(compressed.data(),
-                                                     compressed.size(),
-                                                     ulength);
-
-  snappy::ByteArraySource source(compressed.data(), compressed.size());
-  uint32_t length;
-  const bool result2 = snappy::GetUncompressedLength(&source, &length);
-  CHECK_EQ(result1, result2);
-  return result1;
-}
-
-TEST(SnappyCorruption, TruncatedVarint) {
-  std::string compressed, uncompressed;
-  size_t ulength;
-  compressed.push_back('\xf0');
-  CHECK(!CheckUncompressedLength(compressed, &ulength));
-  CHECK(!snappy::IsValidCompressedBuffer(compressed.data(), compressed.size()));
-  CHECK(!snappy::Uncompress(compressed.data(), compressed.size(),
-                            &uncompressed));
-}
-
-TEST(SnappyCorruption, UnterminatedVarint) {
-  std::string compressed, uncompressed;
-  size_t ulength;
-  compressed.push_back('\x80');
-  compressed.push_back('\x80');
-  compressed.push_back('\x80');
-  compressed.push_back('\x80');
-  compressed.push_back('\x80');
-  compressed.push_back(10);
-  CHECK(!CheckUncompressedLength(compressed, &ulength));
-  CHECK(!snappy::IsValidCompressedBuffer(compressed.data(), compressed.size()));
-  CHECK(!snappy::Uncompress(compressed.data(), compressed.size(),
-                            &uncompressed));
-}
-
-TEST(SnappyCorruption, OverflowingVarint) {
-  std::string compressed, uncompressed;
-  size_t ulength;
-  compressed.push_back('\xfb');
-  compressed.push_back('\xff');
-  compressed.push_back('\xff');
-  compressed.push_back('\xff');
-  compressed.push_back('\x7f');
-  CHECK(!CheckUncompressedLength(compressed, &ulength));
-  CHECK(!snappy::IsValidCompressedBuffer(compressed.data(), compressed.size()));
-  CHECK(!snappy::Uncompress(compressed.data(), compressed.size(),
-                            &uncompressed));
-}
-
-TEST(Snappy, ReadPastEndOfBuffer) {
-  // Check that we do not read past end of input
-
-  // Make a compressed string that ends with a single-byte literal
-  std::string compressed;
-  Varint::Append32(&compressed, 1);
-  AppendLiteral(&compressed, "x");
-
-  std::string uncompressed;
-  DataEndingAtUnreadablePage c(compressed);
-  CHECK(snappy::Uncompress(c.data(), c.size(), &uncompressed));
-  CHECK_EQ(uncompressed, std::string("x"));
-}
-
-// Check for an infinite loop caused by a copy with offset==0
-TEST(Snappy, ZeroOffsetCopy) {
-  const char* compressed = "\x40\x12\x00\x00";
-  //  \x40              Length (must be > kMaxIncrementCopyOverflow)
-  //  \x12\x00\x00      Copy with offset==0, length==5
-  char uncompressed[100];
-  EXPECT_FALSE(snappy::RawUncompress(compressed, 4, uncompressed));
-}
-
-TEST(Snappy, ZeroOffsetCopyValidation) {
-  const char* compressed = "\x05\x12\x00\x00";
-  //  \x05              Length
-  //  \x12\x00\x00      Copy with offset==0, length==5
-  EXPECT_FALSE(snappy::IsValidCompressedBuffer(compressed, 4));
-}
-
-namespace {
-
-int TestFindMatchLength(const char* s1, const char *s2, unsigned length) {
-  uint64_t data;
-  std::pair<size_t, bool> p =
-      snappy::internal::FindMatchLength(s1, s2, s2 + length, &data);
-  CHECK_EQ(p.first < 8, p.second);
-  return p.first;
-}
-
-}  // namespace
-
-TEST(Snappy, FindMatchLength) {
-  // Exercise all different code paths through the function.
-  // 64-bit version:
-
-  // Hit s1_limit in 64-bit loop, hit s1_limit in single-character loop.
-  EXPECT_EQ(6, TestFindMatchLength("012345", "012345", 6));
-  EXPECT_EQ(11, TestFindMatchLength("01234567abc", "01234567abc", 11));
-
-  // Hit s1_limit in 64-bit loop, find a non-match in single-character loop.
-  EXPECT_EQ(9, TestFindMatchLength("01234567abc", "01234567axc", 9));
-
-  // Same, but edge cases.
-  EXPECT_EQ(11, TestFindMatchLength("01234567abc!", "01234567abc!", 11));
-  EXPECT_EQ(11, TestFindMatchLength("01234567abc!", "01234567abc?", 11));
-
-  // Find non-match at once in first loop.
-  EXPECT_EQ(0, TestFindMatchLength("01234567xxxxxxxx", "?1234567xxxxxxxx", 16));
-  EXPECT_EQ(1, TestFindMatchLength("01234567xxxxxxxx", "0?234567xxxxxxxx", 16));
-  EXPECT_EQ(4, TestFindMatchLength("01234567xxxxxxxx", "01237654xxxxxxxx", 16));
-  EXPECT_EQ(7, TestFindMatchLength("01234567xxxxxxxx", "0123456?xxxxxxxx", 16));
-
-  // Find non-match in first loop after one block.
-  EXPECT_EQ(8, TestFindMatchLength("abcdefgh01234567xxxxxxxx",
-                                   "abcdefgh?1234567xxxxxxxx", 24));
-  EXPECT_EQ(9, TestFindMatchLength("abcdefgh01234567xxxxxxxx",
-                                   "abcdefgh0?234567xxxxxxxx", 24));
-  EXPECT_EQ(12, TestFindMatchLength("abcdefgh01234567xxxxxxxx",
-                                    "abcdefgh01237654xxxxxxxx", 24));
-  EXPECT_EQ(15, TestFindMatchLength("abcdefgh01234567xxxxxxxx",
-                                    "abcdefgh0123456?xxxxxxxx", 24));
-
-  // 32-bit version:
-
-  // Short matches.
-  EXPECT_EQ(0, TestFindMatchLength("01234567", "?1234567", 8));
-  EXPECT_EQ(1, TestFindMatchLength("01234567", "0?234567", 8));
-  EXPECT_EQ(2, TestFindMatchLength("01234567", "01?34567", 8));
-  EXPECT_EQ(3, TestFindMatchLength("01234567", "012?4567", 8));
-  EXPECT_EQ(4, TestFindMatchLength("01234567", "0123?567", 8));
-  EXPECT_EQ(5, TestFindMatchLength("01234567", "01234?67", 8));
-  EXPECT_EQ(6, TestFindMatchLength("01234567", "012345?7", 8));
-  EXPECT_EQ(7, TestFindMatchLength("01234567", "0123456?", 8));
-  EXPECT_EQ(7, TestFindMatchLength("01234567", "0123456?", 7));
-  EXPECT_EQ(7, TestFindMatchLength("01234567!", "0123456??", 7));
-
-  // Hit s1_limit in 32-bit loop, hit s1_limit in single-character loop.
-  EXPECT_EQ(10, TestFindMatchLength("xxxxxxabcd", "xxxxxxabcd", 10));
-  EXPECT_EQ(10, TestFindMatchLength("xxxxxxabcd?", "xxxxxxabcd?", 10));
-  EXPECT_EQ(13, TestFindMatchLength("xxxxxxabcdef", "xxxxxxabcdef", 13));
-
-  // Same, but edge cases.
-  EXPECT_EQ(12, TestFindMatchLength("xxxxxx0123abc!", "xxxxxx0123abc!", 12));
-  EXPECT_EQ(12, TestFindMatchLength("xxxxxx0123abc!", "xxxxxx0123abc?", 12));
-
-  // Hit s1_limit in 32-bit loop, find a non-match in single-character loop.
-  EXPECT_EQ(11, TestFindMatchLength("xxxxxx0123abc", "xxxxxx0123axc", 13));
-
-  // Find non-match at once in first loop.
-  EXPECT_EQ(6, TestFindMatchLength("xxxxxx0123xxxxxxxx",
-                                   "xxxxxx?123xxxxxxxx", 18));
-  EXPECT_EQ(7, TestFindMatchLength("xxxxxx0123xxxxxxxx",
-                                   "xxxxxx0?23xxxxxxxx", 18));
-  EXPECT_EQ(8, TestFindMatchLength("xxxxxx0123xxxxxxxx",
-                                   "xxxxxx0132xxxxxxxx", 18));
-  EXPECT_EQ(9, TestFindMatchLength("xxxxxx0123xxxxxxxx",
-                                   "xxxxxx012?xxxxxxxx", 18));
-
-  // Same, but edge cases.
-  EXPECT_EQ(6, TestFindMatchLength("xxxxxx0123", "xxxxxx?123", 10));
-  EXPECT_EQ(7, TestFindMatchLength("xxxxxx0123", "xxxxxx0?23", 10));
-  EXPECT_EQ(8, TestFindMatchLength("xxxxxx0123", "xxxxxx0132", 10));
-  EXPECT_EQ(9, TestFindMatchLength("xxxxxx0123", "xxxxxx012?", 10));
-
-  // Find non-match in first loop after one block.
-  EXPECT_EQ(10, TestFindMatchLength("xxxxxxabcd0123xx",
-                                    "xxxxxxabcd?123xx", 16));
-  EXPECT_EQ(11, TestFindMatchLength("xxxxxxabcd0123xx",
-                                    "xxxxxxabcd0?23xx", 16));
-  EXPECT_EQ(12, TestFindMatchLength("xxxxxxabcd0123xx",
-                                    "xxxxxxabcd0132xx", 16));
-  EXPECT_EQ(13, TestFindMatchLength("xxxxxxabcd0123xx",
-                                    "xxxxxxabcd012?xx", 16));
-
-  // Same, but edge cases.
-  EXPECT_EQ(10, TestFindMatchLength("xxxxxxabcd0123", "xxxxxxabcd?123", 14));
-  EXPECT_EQ(11, TestFindMatchLength("xxxxxxabcd0123", "xxxxxxabcd0?23", 14));
-  EXPECT_EQ(12, TestFindMatchLength("xxxxxxabcd0123", "xxxxxxabcd0132", 14));
-  EXPECT_EQ(13, TestFindMatchLength("xxxxxxabcd0123", "xxxxxxabcd012?", 14));
-}
-
-TEST(Snappy, FindMatchLengthRandom) {
-  constexpr int kNumTrials = 10000;
-  constexpr int kTypicalLength = 10;
-  std::minstd_rand0 rng(FLAGS_test_random_seed);
-  std::uniform_int_distribution<int> uniform_byte(0, 255);
-  std::bernoulli_distribution one_in_two(1.0 / 2);
-  std::bernoulli_distribution one_in_typical_length(1.0 / kTypicalLength);
-
-  for (int i = 0; i < kNumTrials; ++i) {
-    std::string s, t;
-    char a = static_cast<char>(uniform_byte(rng));
-    char b = static_cast<char>(uniform_byte(rng));
-    while (!one_in_typical_length(rng)) {
-      s.push_back(one_in_two(rng) ? a : b);
-      t.push_back(one_in_two(rng) ? a : b);
-    }
-    DataEndingAtUnreadablePage u(s);
-    DataEndingAtUnreadablePage v(t);
-    size_t matched = TestFindMatchLength(u.data(), v.data(), t.size());
-    if (matched == t.size()) {
-      EXPECT_EQ(s, t);
-    } else {
-      EXPECT_NE(s[matched], t[matched]);
-      for (size_t j = 0; j < matched; ++j) {
-        EXPECT_EQ(s[j], t[j]);
-      }
-    }
-  }
-}
-
-static uint16_t MakeEntry(unsigned int extra,
-                        unsigned int len,
-                        unsigned int copy_offset) {
-  // Check that all of the fields fit within the allocated space
-  assert(extra       == (extra & 0x7));          // At most 3 bits
-  assert(copy_offset == (copy_offset & 0x7));    // At most 3 bits
-  assert(len         == (len & 0x7f));           // At most 7 bits
-  return len | (copy_offset << 8) | (extra << 11);
-}
-
-// Check that the decompression table is correct, and optionally print out
-// the computed one.
-TEST(Snappy, VerifyCharTable) {
-  using snappy::internal::LITERAL;
-  using snappy::internal::COPY_1_BYTE_OFFSET;
-  using snappy::internal::COPY_2_BYTE_OFFSET;
-  using snappy::internal::COPY_4_BYTE_OFFSET;
-  using snappy::internal::char_table;
-
-  uint16_t dst[256];
-
-  // Place invalid entries in all places to detect missing initialization
-  int assigned = 0;
-  for (int i = 0; i < 256; ++i) {
-    dst[i] = 0xffff;
-  }
-
-  // Small LITERAL entries.  We store (len-1) in the top 6 bits.
-  for (uint8_t len = 1; len <= 60; ++len) {
-    dst[LITERAL | ((len - 1) << 2)] = MakeEntry(0, len, 0);
-    assigned++;
-  }
-
-  // Large LITERAL entries.  We use 60..63 in the high 6 bits to
-  // encode the number of bytes of length info that follow the opcode.
-  for (uint8_t extra_bytes = 1; extra_bytes <= 4; ++extra_bytes) {
-    // We set the length field in the lookup table to 1 because extra
-    // bytes encode len-1.
-    dst[LITERAL | ((extra_bytes + 59) << 2)] = MakeEntry(extra_bytes, 1, 0);
-    assigned++;
-  }
-
-  // COPY_1_BYTE_OFFSET.
-  //
-  // The tag byte in the compressed data stores len-4 in 3 bits, and
-  // offset/256 in 5 bits.  offset%256 is stored in the next byte.
-  //
-  // This format is used for length in range [4..11] and offset in
-  // range [0..2047]
-  for (uint8_t len = 4; len < 12; ++len) {
-    for (uint16_t offset = 0; offset < 2048; offset += 256) {
-      uint8_t offset_high = static_cast<uint8_t>(offset >> 8);
-      dst[COPY_1_BYTE_OFFSET | ((len - 4) << 2) | (offset_high << 5)] =
-          MakeEntry(1, len, offset_high);
-      assigned++;
-    }
-  }
-
-  // COPY_2_BYTE_OFFSET.
-  // Tag contains len-1 in top 6 bits, and offset in next two bytes.
-  for (uint8_t len = 1; len <= 64; ++len) {
-    dst[COPY_2_BYTE_OFFSET | ((len - 1) << 2)] = MakeEntry(2, len, 0);
-    assigned++;
-  }
-
-  // COPY_4_BYTE_OFFSET.
-  // Tag contents len-1 in top 6 bits, and offset in next four bytes.
-  for (uint8_t len = 1; len <= 64; ++len) {
-    dst[COPY_4_BYTE_OFFSET | ((len - 1) << 2)] = MakeEntry(4, len, 0);
-    assigned++;
-  }
-
-  // Check that each entry was initialized exactly once.
-  EXPECT_EQ(256, assigned) << "Assigned only " << assigned << " of 256";
-  for (int i = 0; i < 256; ++i) {
-    EXPECT_NE(0xffff, dst[i]) << "Did not assign byte " << i;
-  }
-
-  if (FLAGS_snappy_dump_decompression_table) {
-    std::printf("static const uint16_t char_table[256] = {\n  ");
-    for (int i = 0; i < 256; ++i) {
-      std::printf("0x%04x%s",
-                  dst[i],
-                  ((i == 255) ? "\n" : (((i % 8) == 7) ? ",\n  " : ", ")));
-    }
-    std::printf("};\n");
-  }
-
-  // Check that computed table matched recorded table.
-  for (int i = 0; i < 256; ++i) {
-    EXPECT_EQ(dst[i], char_table[i]) << "Mismatch in byte " << i;
-  }
-}
-
-static void CompressFile(const char* fname) {
-  std::string fullinput;
-  CHECK_OK(file::GetContents(fname, &fullinput, file::Defaults()));
-
-  std::string compressed;
-  Compress(fullinput.data(), fullinput.size(), SNAPPY, &compressed, false);
-
-  CHECK_OK(file::SetContents(std::string(fname).append(".comp"), compressed,
-                             file::Defaults()));
-}
-
-static void UncompressFile(const char* fname) {
-  std::string fullinput;
-  CHECK_OK(file::GetContents(fname, &fullinput, file::Defaults()));
-
-  size_t uncompLength;
-  CHECK(CheckUncompressedLength(fullinput, &uncompLength));
-
-  std::string uncompressed;
-  uncompressed.resize(uncompLength);
-  CHECK(snappy::Uncompress(fullinput.data(), fullinput.size(), &uncompressed));
-
-  CHECK_OK(file::SetContents(std::string(fname).append(".uncomp"), uncompressed,
-                             file::Defaults()));
-}
-
-static void MeasureFile(const char* fname) {
-  std::string fullinput;
-  CHECK_OK(file::GetContents(fname, &fullinput, file::Defaults()));
-  std::printf("%-40s :\n", fname);
-
-  int start_len = (FLAGS_start_len < 0) ? fullinput.size() : FLAGS_start_len;
-  int end_len = fullinput.size();
-  if (FLAGS_end_len >= 0) {
-    end_len = std::min<int>(fullinput.size(), FLAGS_end_len);
-  }
-  for (int len = start_len; len <= end_len; ++len) {
-    const char* const input = fullinput.data();
-    int repeats = (FLAGS_bytes + len) / (len + 1);
-    if (FLAGS_zlib)     Measure(input, len, ZLIB, repeats, 1024<<10);
-    if (FLAGS_lzo)      Measure(input, len, LZO, repeats, 1024<<10);
-    if (FLAGS_snappy)    Measure(input, len, SNAPPY, repeats, 4096<<10);
-
-    // For block-size based measurements
-    if (0 && FLAGS_snappy) {
-      Measure(input, len, SNAPPY, repeats, 8<<10);
-      Measure(input, len, SNAPPY, repeats, 16<<10);
-      Measure(input, len, SNAPPY, repeats, 32<<10);
-      Measure(input, len, SNAPPY, repeats, 64<<10);
-      Measure(input, len, SNAPPY, repeats, 256<<10);
-      Measure(input, len, SNAPPY, repeats, 1024<<10);
-    }
-  }
-}
-
-static struct {
-  const char* label;
-  const char* filename;
-  size_t size_limit;
-} files[] = {
-  { "html", "html", 0 },
-  { "urls", "urls.10K", 0 },
-  { "jpg", "fireworks.jpeg", 0 },
-  { "jpg_200", "fireworks.jpeg", 200 },
-  { "pdf", "paper-100k.pdf", 0 },
-  { "html4", "html_x_4", 0 },
-  { "txt1", "alice29.txt", 0 },
-  { "txt2", "asyoulik.txt", 0 },
-  { "txt3", "lcet10.txt", 0 },
-  { "txt4", "plrabn12.txt", 0 },
-  { "pb", "geo.protodata", 0 },
-  { "gaviota", "kppkn.gtb", 0 },
-};
-
-static void BM_UFlat(int iters, int arg) {
-  StopBenchmarkTiming();
-
-  // Pick file to process based on "arg"
-  CHECK_GE(arg, 0);
-  CHECK_LT(arg, ARRAYSIZE(files));
-  std::string contents =
-      ReadTestDataFile(files[arg].filename, files[arg].size_limit);
-
-  std::string zcontents;
-  snappy::Compress(contents.data(), contents.size(), &zcontents);
-  char* dst = new char[contents.size()];
-
-  SetBenchmarkBytesProcessed(static_cast<int64_t>(iters) *
-                             static_cast<int64_t>(contents.size()));
-  SetBenchmarkLabel(files[arg].label);
-  StartBenchmarkTiming();
-  while (iters-- > 0) {
-    CHECK(snappy::RawUncompress(zcontents.data(), zcontents.size(), dst));
-  }
-  StopBenchmarkTiming();
-
-  delete[] dst;
-}
-BENCHMARK(BM_UFlat)->DenseRange(0, ARRAYSIZE(files) - 1);
-
-static void BM_UValidate(int iters, int arg) {
-  StopBenchmarkTiming();
-
-  // Pick file to process based on "arg"
-  CHECK_GE(arg, 0);
-  CHECK_LT(arg, ARRAYSIZE(files));
-  std::string contents =
-      ReadTestDataFile(files[arg].filename, files[arg].size_limit);
-
-  std::string zcontents;
-  snappy::Compress(contents.data(), contents.size(), &zcontents);
-
-  SetBenchmarkBytesProcessed(static_cast<int64_t>(iters) *
-                             static_cast<int64_t>(contents.size()));
-  SetBenchmarkLabel(files[arg].label);
-  StartBenchmarkTiming();
-  while (iters-- > 0) {
-    CHECK(snappy::IsValidCompressedBuffer(zcontents.data(), zcontents.size()));
-  }
-  StopBenchmarkTiming();
-}
-BENCHMARK(BM_UValidate)->DenseRange(0, 4);
-
-static void BM_UIOVec(int iters, int arg) {
-  StopBenchmarkTiming();
-
-  // Pick file to process based on "arg"
-  CHECK_GE(arg, 0);
-  CHECK_LT(arg, ARRAYSIZE(files));
-  std::string contents =
-      ReadTestDataFile(files[arg].filename, files[arg].size_limit);
-
-  std::string zcontents;
-  snappy::Compress(contents.data(), contents.size(), &zcontents);
-
-  // Uncompress into an iovec containing ten entries.
-  const int kNumEntries = 10;
-  struct iovec iov[kNumEntries];
-  char *dst = new char[contents.size()];
-  size_t used_so_far = 0;
-  for (int i = 0; i < kNumEntries; ++i) {
-    iov[i].iov_base = dst + used_so_far;
-    if (used_so_far == contents.size()) {
-      iov[i].iov_len = 0;
-      continue;
-    }
-
-    if (i == kNumEntries - 1) {
-      iov[i].iov_len = contents.size() - used_so_far;
-    } else {
-      iov[i].iov_len = contents.size() / kNumEntries;
-    }
-    used_so_far += iov[i].iov_len;
-  }
-
-  SetBenchmarkBytesProcessed(static_cast<int64_t>(iters) *
-                             static_cast<int64_t>(contents.size()));
-  SetBenchmarkLabel(files[arg].label);
-  StartBenchmarkTiming();
-  while (iters-- > 0) {
-    CHECK(snappy::RawUncompressToIOVec(zcontents.data(), zcontents.size(), iov,
-                                       kNumEntries));
-  }
-  StopBenchmarkTiming();
-
-  delete[] dst;
-}
-BENCHMARK(BM_UIOVec)->DenseRange(0, 4);
-
-static void BM_UFlatSink(int iters, int arg) {
-  StopBenchmarkTiming();
-
-  // Pick file to process based on "arg"
-  CHECK_GE(arg, 0);
-  CHECK_LT(arg, ARRAYSIZE(files));
-  std::string contents =
-      ReadTestDataFile(files[arg].filename, files[arg].size_limit);
-
-  std::string zcontents;
-  snappy::Compress(contents.data(), contents.size(), &zcontents);
-  char* dst = new char[contents.size()];
-
-  SetBenchmarkBytesProcessed(static_cast<int64_t>(iters) *
-                             static_cast<int64_t>(contents.size()));
-  SetBenchmarkLabel(files[arg].label);
-  StartBenchmarkTiming();
-  while (iters-- > 0) {
-    snappy::ByteArraySource source(zcontents.data(), zcontents.size());
-    snappy::UncheckedByteArraySink sink(dst);
-    CHECK(snappy::Uncompress(&source, &sink));
-  }
-  StopBenchmarkTiming();
-
-  std::string s(dst, contents.size());
-  CHECK_EQ(contents, s);
-
-  delete[] dst;
-}
-
-BENCHMARK(BM_UFlatSink)->DenseRange(0, ARRAYSIZE(files) - 1);
-
-static void BM_ZFlat(int iters, int arg) {
-  StopBenchmarkTiming();
-
-  // Pick file to process based on "arg"
-  CHECK_GE(arg, 0);
-  CHECK_LT(arg, ARRAYSIZE(files));
-  std::string contents =
-      ReadTestDataFile(files[arg].filename, files[arg].size_limit);
-
-  char* dst = new char[snappy::MaxCompressedLength(contents.size())];
-
-  SetBenchmarkBytesProcessed(static_cast<int64_t>(iters) *
-                             static_cast<int64_t>(contents.size()));
-  StartBenchmarkTiming();
-
-  size_t zsize = 0;
-  while (iters-- > 0) {
-    snappy::RawCompress(contents.data(), contents.size(), dst, &zsize);
-  }
-  StopBenchmarkTiming();
-  const double compression_ratio =
-      static_cast<double>(zsize) / std::max<size_t>(1, contents.size());
-  SetBenchmarkLabel(StrFormat("%s (%.2f %%)", files[arg].label,
-                              100.0 * compression_ratio));
-  VLOG(0) << StrFormat("compression for %s: %zd -> %zd bytes",
-                       files[arg].label, static_cast<int>(contents.size()),
-                       static_cast<int>(zsize));
-  delete[] dst;
-}
-BENCHMARK(BM_ZFlat)->DenseRange(0, ARRAYSIZE(files) - 1);
-
-static void BM_ZFlatAll(int iters, int arg) {
-  StopBenchmarkTiming();
-
-  CHECK_EQ(arg, 0);
-  const int num_files = ARRAYSIZE(files);
-
-  std::vector<std::string> contents(num_files);
-  std::vector<char*> dst(num_files);
-
-  int64_t total_contents_size = 0;
-  for (int i = 0; i < num_files; ++i) {
-    contents[i] = ReadTestDataFile(files[i].filename, files[i].size_limit);
-    dst[i] = new char[snappy::MaxCompressedLength(contents[i].size())];
-    total_contents_size += contents[i].size();
-  }
-
-  SetBenchmarkBytesProcessed(static_cast<int64_t>(iters) * total_contents_size);
-  StartBenchmarkTiming();
-
-  size_t zsize = 0;
-  while (iters-- > 0) {
-    for (int i = 0; i < num_files; ++i) {
-      snappy::RawCompress(contents[i].data(), contents[i].size(), dst[i],
-                          &zsize);
-    }
-  }
-  StopBenchmarkTiming();
-
-  for (char* dst_item : dst) {
-    delete[] dst_item;
-  }
-  SetBenchmarkLabel(StrFormat("%d files", num_files));
-}
-BENCHMARK(BM_ZFlatAll)->DenseRange(0, 0);
-
-static void BM_ZFlatIncreasingTableSize(int iters, int arg) {
-  StopBenchmarkTiming();
-
-  CHECK_EQ(arg, 0);
-  CHECK_GT(ARRAYSIZE(files), 0);
-  const std::string base_content =
-      ReadTestDataFile(files[0].filename, files[0].size_limit);
-
-  std::vector<std::string> contents;
-  std::vector<char*> dst;
-  int64_t total_contents_size = 0;
-  for (int table_bits = kMinHashTableBits; table_bits <= kMaxHashTableBits;
-       ++table_bits) {
-    std::string content = base_content;
-    content.resize(1 << table_bits);
-    dst.push_back(new char[snappy::MaxCompressedLength(content.size())]);
-    total_contents_size += content.size();
-    contents.push_back(std::move(content));
-  }
-
-  size_t zsize = 0;
-  SetBenchmarkBytesProcessed(static_cast<int64_t>(iters) * total_contents_size);
-  StartBenchmarkTiming();
-  while (iters-- > 0) {
-    for (size_t i = 0; i < contents.size(); ++i) {
-      snappy::RawCompress(contents[i].data(), contents[i].size(), dst[i],
-                          &zsize);
-    }
-  }
-  StopBenchmarkTiming();
-
-  for (char* dst_item : dst) {
-    delete[] dst_item;
-  }
-  SetBenchmarkLabel(StrFormat("%zd tables", contents.size()));
-}
-BENCHMARK(BM_ZFlatIncreasingTableSize)->DenseRange(0, 0);
-
-}  // namespace snappy
-
-int main(int argc, char** argv) {
-  InitGoogle(argv[0], &argc, &argv, true);
-  RunSpecifiedBenchmarks();
-
-  if (argc >= 2) {
-    for (int arg = 1; arg < argc; ++arg) {
-      if (FLAGS_write_compressed) {
-        snappy::CompressFile(argv[arg]);
-      } else if (FLAGS_write_uncompressed) {
-        snappy::UncompressFile(argv[arg]);
-      } else {
-        snappy::MeasureFile(argv[arg]);
-      }
-    }
-    return 0;
-  }
-
-  return RUN_ALL_TESTS();
-}