contrast-agent 3.8.4

data/funchook/distorm/src/operands.h

@@ -0,0 +1,28 @@
+/*
+operands.h
+
+diStorm3 - Powerful disassembler for X86/AMD64
+http://ragestorm.net/distorm/
+distorm at gmail dot com
+Copyright (C) 2003-2016 Gil Dabah
+This library is licensed under the BSD license. See the file COPYING.
+*/
+
+
+#ifndef OPERANDS_H
+#define OPERANDS_H
+
+#include "config.h"
+#include "decoder.h"
+#include "prefix.h"
+#include "instructions.h"
+
+
+extern uint32_t _REGISTERTORCLASS[];
+
+int operands_extract(_CodeInfo* ci, _DInst* di, _InstInfo* ii,
+                     _iflags instFlags, _OpType type, _OperandNumberType opNum,
+                     unsigned int modrm, _PrefixState* ps, _DecodeType effOpSz,
+                     _DecodeType effAdrSz, int* lockableInstruction);
+
+#endif /* OPERANDS_H */

data/funchook/distorm/src/prefix.c

@@ -0,0 +1,368 @@
+/*
+prefix.c
+
+diStorm3 - Powerful disassembler for X86/AMD64
+http://ragestorm.net/distorm/
+distorm at gmail dot com
+Copyright (C) 2003-2016 Gil Dabah
+This library is licensed under the BSD license. See the file COPYING.
+*/
+
+
+#include "prefix.h"
+
+#include "x86defs.h"
+#include "instructions.h"
+#include "../include/mnemonics.h"
+
+
+/*
+ * The main purpose of this module is to keep track of all kind of prefixes a single instruction may have.
+ * The problem is that a single instruction may have up to six different prefix-types.
+ * That's why I have to detect such cases and drop those excess prefixes.
+ */
+
+int prefixes_is_valid(unsigned int ch, _DecodeType dt)
+{
+	switch (ch) {
+		/* for i in xrange(0x40, 0x50): print "case 0x%2x:" % i */
+		case 0x40: /* REX: */
+		case 0x41:
+		case 0x42:
+		case 0x43:
+		case 0x44:
+		case 0x45:
+		case 0x46:
+		case 0x47:
+		case 0x48:
+		case 0x49:
+		case 0x4a:
+		case 0x4b:
+		case 0x4c:
+		case 0x4d:
+		case 0x4e:
+		case 0x4f: return (dt == Decode64Bits);
+		case PREFIX_LOCK: return TRUE;
+		case PREFIX_REPNZ: return TRUE;
+		case PREFIX_REP: return TRUE;
+		case PREFIX_CS: return TRUE;
+		case PREFIX_SS: return TRUE;
+		case PREFIX_DS: return TRUE;
+		case PREFIX_ES: return TRUE;
+		case PREFIX_FS: return TRUE;
+		case PREFIX_GS: return TRUE;
+		case PREFIX_OP_SIZE: return TRUE;
+		case PREFIX_ADDR_SIZE: return TRUE;
+		/* The VEXs might be false positives, the decode_perfixes will determine for sure. */
+		case PREFIX_VEX2b: /* VEX is supported for all modes, because 16 bits Pmode is included. */
+		case PREFIX_VEX3b: return TRUE;
+	}
+	return FALSE;
+}
+
+/* Ignore a specific prefix type. */
+void prefixes_ignore(_PrefixState* ps, _PrefixIndexer pi)
+{
+	/*
+	 * If that type of prefix appeared already, set the bit of that *former* prefix.
+	 * Anyway, set the new index of that prefix type to the current index, so next time we know its position.
+	 */
+	if (ps->pfxIndexer[pi] != PFXIDX_NONE) ps->unusedPrefixesMask |= (1 << ps->pfxIndexer[pi]);
+}
+
+/* Ignore all prefix. */
+void prefixes_ignore_all(_PrefixState* ps)
+{
+	int i;
+	for (i = 0; i < PFXIDX_MAX; i++)
+		prefixes_ignore(ps, i);
+}
+
+/* Calculates which prefixes weren't used and accordingly sets the bits in the unusedPrefixesMask. */
+uint16_t prefixes_set_unused_mask(_PrefixState* ps)
+{
+	/*
+	 * The decodedPrefixes represents the prefixes that were *read* from the binary stream for the instruction.
+	 * The usedPrefixes represents the prefixes that were actually used by the instruction in the *decode* phase.
+	 * Xoring between the two will result in a 'diff' which returns the prefixes that were read
+	 * from the stream *and* that were never used in the actual decoding.
+	 *
+	 * Only one prefix per type can be set in decodedPrefixes from the stream.
+	 * Therefore it's enough to check each type once and set the flag accordingly.
+	 * That's why we had to book-keep each prefix type and its position.
+	 * So now we know which bits we need to set exactly in the mask.
+	 */
+	_iflags unusedPrefixesDiff = ps->decodedPrefixes ^ ps->usedPrefixes;
+
+	/* Examine unused prefixes by type: */
+	/*
+	 * About REX: it might be set in the diff although it was never in the stream itself.
+	 * This is because the vrex is shared between VEX and REX and some places flag it as REX usage, while
+	 * we were really decoding an AVX instruction.
+	 * It's not a big problem, because the prefixes_ignore func will ignore it anyway,
+	 * since it wasn't seen earlier. But it's important to know this.
+	 */
+	if (unusedPrefixesDiff & INST_PRE_REX) prefixes_ignore(ps, PFXIDX_REX);
+	if (unusedPrefixesDiff & INST_PRE_SEGOVRD_MASK) prefixes_ignore(ps, PFXIDX_SEG);
+	if (unusedPrefixesDiff & INST_PRE_LOKREP_MASK) prefixes_ignore(ps, PFXIDX_LOREP);
+	if (unusedPrefixesDiff & INST_PRE_OP_SIZE) prefixes_ignore(ps, PFXIDX_OP_SIZE);
+	if (unusedPrefixesDiff & INST_PRE_ADDR_SIZE) prefixes_ignore(ps, PFXIDX_ADRS);
+	/* If a VEX instruction was found, its prefix is considered as used, therefore no point for checking for it. */
+
+	return ps->unusedPrefixesMask;
+}
+
+/*
+ * Mark a prefix as unused, and bookkeep where we last saw this same type,
+ * because in the future we might want to disable it too.
+ */
+_INLINE_ void prefixes_track_unused(_PrefixState* ps, int index, _PrefixIndexer pi)
+{
+	prefixes_ignore(ps, pi);
+	/* Book-keep the current index for this type. */
+	ps->pfxIndexer[pi] = index;
+}
+
+/*
+ * Read as many prefixes as possible, up to 15 bytes, and halt when we encounter non-prefix byte.
+ * This algorithm tries to imitate a real processor, where the same prefix can appear a few times, etc.
+ * The tiny complexity is that we want to know when a prefix was superfluous and mark any copy of it as unused.
+ * Note that the last prefix of its type will be considered as used, and all the others (of same type) before it as unused.
+ */
+void prefixes_decode(const uint8_t* code, int codeLen, _PrefixState* ps, _DecodeType dt)
+{
+	int index, done;
+	uint8_t vex;
+
+	/*
+	 * First thing to do, scan for prefixes, there are six types of prefixes.
+	 * There may be up to six prefixes before a single instruction, not the same type, no special order,
+	 * except REX/VEX must precede immediately the first opcode byte.
+	 * BTW - This is the reason why I didn't make the REP prefixes part of the instructions (STOS/SCAS/etc).
+	 *
+	 * Another thing, the instruction maximum size is 15 bytes, thus if we read more than 15 bytes, we will halt.
+	 *
+	 * We attach all prefixes to the next instruction, there might be two or more occurrences from the same prefix.
+	 * Also, since VEX can be allowed only once we will test it separately.
+	 */
+	for (index = 0, done = FALSE;
+		 (codeLen > 0) && (code - ps->start < INST_MAXIMUM_SIZE);
+		 code++, codeLen--, index++) {
+		/*
+		NOTE: AMD treat lock/rep as two different groups... But I am based on Intel.
+
+			- Lock and Repeat:
+				- 0xF0 � LOCK
+				- 0xF2 � REPNE/REPNZ
+				- 0xF3 - REP/REPE/REPZ
+			- Segment Override:
+				- 0x2E - CS
+				- 0x36 - SS
+				- 0x3E - DS
+				- 0x26 - ES
+				- 0x64 - FS
+				- 0x65 - GS
+			- Operand-Size Override: 0x66, switching default size.
+			- Address-Size Override: 0x67, switching default size.
+
+		64 Bits:
+			- REX: 0x40 - 0x4f, extends register access.
+			- 2 Bytes VEX: 0xc4
+			- 3 Bytes VEX: 0xc5
+		32 Bits:
+			- 2 Bytes VEX: 0xc4 11xx-xxxx
+			- 3 Bytes VEX: 0xc5 11xx-xxxx
+		*/
+
+		/* Examine what type of prefix we got. */
+		switch (*code)
+		{
+			/* REX type, 64 bits decoding mode only: */
+			case 0x40:
+			case 0x41:
+			case 0x42:
+			case 0x43:
+			case 0x44:
+			case 0x45:
+			case 0x46:
+			case 0x47:
+			case 0x48:
+			case 0x49:
+			case 0x4a:
+			case 0x4b:
+			case 0x4c:
+			case 0x4d:
+			case 0x4e:
+			case 0x4f:
+				if (dt == Decode64Bits) {
+					ps->decodedPrefixes |= INST_PRE_REX;
+					ps->vrex = *code & 0xf; /* Keep only BXRW. */
+					ps->rexPos = code;
+					ps->prefixExtType = PET_REX;
+					prefixes_track_unused(ps, index, PFXIDX_REX);
+				} else done = TRUE; /* If we are not in 64 bits mode, it's an instruction, then halt. */
+			break;
+
+			/* LOCK and REPx type: */
+			case PREFIX_LOCK:
+				ps->decodedPrefixes |= INST_PRE_LOCK;
+				prefixes_track_unused(ps, index, PFXIDX_LOREP);
+			break;
+			case PREFIX_REPNZ:
+				ps->decodedPrefixes |= INST_PRE_REPNZ;
+				prefixes_track_unused(ps, index, PFXIDX_LOREP);
+			break;
+			case PREFIX_REP:
+				ps->decodedPrefixes |= INST_PRE_REP;
+				prefixes_track_unused(ps, index, PFXIDX_LOREP);
+			break;
+
+			/* Seg Overide type: */
+			case PREFIX_CS:
+				ps->decodedPrefixes |= INST_PRE_CS;
+				prefixes_track_unused(ps, index, PFXIDX_SEG);
+			break;
+			case PREFIX_SS:
+				ps->decodedPrefixes |= INST_PRE_SS;
+				prefixes_track_unused(ps, index, PFXIDX_SEG);
+			break;
+			case PREFIX_DS:
+				ps->decodedPrefixes |= INST_PRE_DS;
+				prefixes_track_unused(ps, index, PFXIDX_SEG);
+			break;
+			case PREFIX_ES:
+				ps->decodedPrefixes |= INST_PRE_ES;
+				prefixes_track_unused(ps, index, PFXIDX_SEG);
+			break;
+			case PREFIX_FS:
+				ps->decodedPrefixes |= INST_PRE_FS;
+				prefixes_track_unused(ps, index, PFXIDX_SEG);
+			break;
+			case PREFIX_GS:
+				ps->decodedPrefixes |= INST_PRE_GS;
+				prefixes_track_unused(ps, index, PFXIDX_SEG);
+			break;
+
+			/* Op Size type: */
+			case PREFIX_OP_SIZE:
+				ps->decodedPrefixes |= INST_PRE_OP_SIZE;
+				prefixes_track_unused(ps, index, PFXIDX_OP_SIZE);
+			break;
+
+			/* Addr Size type: */
+			case PREFIX_ADDR_SIZE:
+				ps->decodedPrefixes |= INST_PRE_ADDR_SIZE;
+				prefixes_track_unused(ps, index, PFXIDX_ADRS);
+			break;
+
+			/* Non-prefix byte now, so break 2. */
+			default: done = TRUE; break;
+		}
+		if (done) break;
+	}
+
+	/* 2 Bytes VEX: */
+	if ((codeLen >= 2) &&
+		(*code == PREFIX_VEX2b) &&
+		((code - ps->start) <= INST_MAXIMUM_SIZE - 2)) {
+		/*
+		 * In 32 bits the second byte has to be in the special range of Mod=11.
+		 * Otherwise it might be a normal LDS instruction.
+		 */
+		if ((dt == Decode64Bits) || (*(code + 1) >= INST_DIVIDED_MODRM)) {
+			ps->vexPos = code + 1;
+			ps->decodedPrefixes |= INST_PRE_VEX;
+			ps->prefixExtType = PET_VEX2BYTES;
+
+			/*
+			 * VEX 1 byte bits:
+			 * |7-6--3-2-10|
+			 * |R|vvvv|L|pp|
+			 * |-----------|
+			 */
+
+			/* -- Convert from VEX prefix to VREX flags -- */
+			vex = *ps->vexPos;
+			if (~vex & 0x80 && dt == Decode64Bits) ps->vrex |= PREFIX_EX_R; /* Convert VEX.R. */
+			if (vex & 4) ps->vrex |= PREFIX_EX_L; /* Convert VEX.L. */
+
+			code += 2;
+		}
+	}
+
+	/* 3 Bytes VEX: */
+	if ((codeLen >= 3) &&
+		(*code == PREFIX_VEX3b) &&
+		((code - ps->start) <= INST_MAXIMUM_SIZE - 3) &&
+		(~ps->decodedPrefixes & INST_PRE_VEX)) {
+		/*
+		 * In 32 bits the second byte has to be in the special range of Mod=11.
+		 * Otherwise it might be a normal LES instruction.
+		 * And we don't care now about the 3rd byte.
+		 */
+		if ((dt == Decode64Bits) || (*(code + 1) >= INST_DIVIDED_MODRM)) {
+			ps->vexPos = code + 1;
+			ps->decodedPrefixes |= INST_PRE_VEX;
+			ps->prefixExtType = PET_VEX3BYTES;
+
+			/*
+			 * VEX first and second bytes:
+			 * |7-6-5-4----0|  |7-6--3-2-10|
+			 * |R|X|B|m-mmmm|  |W|vvvv|L|pp|
+			 * |------------|  |-----------|
+			 */
+
+			/* -- Convert from VEX prefix to VREX flags -- */
+			vex = *ps->vexPos;
+			ps->vrex |= ((~vex >> 5) & 0x7); /* Shift and invert VEX.R/X/B to their place */
+			vex = *(ps->vexPos + 1);
+			if (vex & 4) ps->vrex |= PREFIX_EX_L; /* Convert VEX.L. */
+			if (vex & 0x80) ps->vrex |= PREFIX_EX_W; /* Convert VEX.W. */
+
+			/* Clear some flags if the mode isn't 64 bits. */
+			if (dt != Decode64Bits) ps->vrex &= ~(PREFIX_EX_B | PREFIX_EX_X | PREFIX_EX_R | PREFIX_EX_W);
+
+			code += 3;
+		}
+	}
+
+	/*
+	 * Save last byte scanned address, so the decoder could keep on scanning from this point and on and on and on.
+	 * In addition the decoder is able to know that the last byte could lead to MMX/SSE instructions (preceding REX if exists).
+	 */
+	ps->last = code; /* ps->last points to an opcode byte. */
+}
+
+/*
+ * For every memory-indirection operand we want to set its corresponding default segment.
+ * If the segment is being overrided, we need to see whether we use it or not.
+ * We will use it only if it's not the default one already.
+ */
+void prefixes_use_segment(_iflags defaultSeg, _PrefixState* ps, _DecodeType dt, _DInst* di)
+{
+	_iflags flags = 0;
+	if (dt == Decode64Bits) flags = ps->decodedPrefixes & INST_PRE_SEGOVRD_MASK64;
+	else flags = ps->decodedPrefixes & INST_PRE_SEGOVRD_MASK;
+
+	if ((flags == 0) || (flags == defaultSeg)) {
+		flags = defaultSeg;
+		di->segment |= SEGMENT_DEFAULT;
+	} else if (flags != defaultSeg) {
+		/* Use it only if it's non-default segment. */
+		ps->usedPrefixes |= flags;
+	}
+
+	/* ASSERT: R_XX must be below 128. */
+	switch (flags)
+	{
+		case INST_PRE_ES: di->segment |= R_ES; break;
+		case INST_PRE_CS: di->segment |= R_CS; break;
+		case INST_PRE_SS: di->segment |= R_SS; break;
+		case INST_PRE_DS: di->segment |= R_DS; break;
+		case INST_PRE_FS: di->segment |= R_FS; break;
+		case INST_PRE_GS: di->segment |= R_GS; break;
+	}
+
+	/* If it's one of the CS,SS,DS,ES and the mode is 64 bits, set segment it to none, since it's ignored. */
+	if ((dt == Decode64Bits) && (flags & INST_PRE_SEGOVRD_MASK32)) di->segment = R_NONE;
+}

data/funchook/distorm/src/prefix.h

@@ -0,0 +1,64 @@
+/*
+prefix.h
+
+diStorm3 - Powerful disassembler for X86/AMD64
+http://ragestorm.net/distorm/
+distorm at gmail dot com
+Copyright (C) 2003-2016 Gil Dabah
+This library is licensed under the BSD license. See the file COPYING.
+*/
+
+
+#ifndef PREFIX_H
+#define PREFIX_H
+
+#include "config.h"
+#include "decoder.h"
+
+
+/* Specifies the type of the extension prefix, such as: REX, 2 bytes VEX, 3 bytes VEX. */
+typedef enum {PET_NONE = 0, PET_REX, PET_VEX2BYTES, PET_VEX3BYTES} _PrefixExtType;
+
+/* Specifies an index into a table of prefixes by their type. */
+typedef enum {PFXIDX_NONE = -1, PFXIDX_REX, PFXIDX_LOREP, PFXIDX_SEG, PFXIDX_OP_SIZE, PFXIDX_ADRS, PFXIDX_MAX} _PrefixIndexer;
+
+/*
+* This holds the prefixes state for the current instruction we decode.
+* decodedPrefixes includes all specific prefixes that the instruction got.
+* start is a pointer to the first prefix to take into account.
+* last is a pointer to the last byte we scanned.
+* Other pointers are used to keep track of prefixes positions and help us know if they appeared already and where.
+*/
+typedef struct {
+	_iflags decodedPrefixes, usedPrefixes;
+	const uint8_t *start, *last, *vexPos, *rexPos;
+	_PrefixExtType prefixExtType;
+	uint16_t unusedPrefixesMask;
+	/* Indicates whether the operand size prefix (0x66) was used as a mandatory prefix. */
+	int isOpSizeMandatory;
+	/* If VEX prefix is used, store the VEX.vvvv field. */
+	unsigned int vexV;
+	/* The fields B/X/R/W/L of REX and VEX are stored together in this byte. */
+	unsigned int vrex;
+
+	/* !! Make sure pfxIndexer is LAST! Otherwise memset won't work well with it. !! */
+
+	/* Holds the offset to the prefix byte by its type. */
+	int pfxIndexer[PFXIDX_MAX];
+} _PrefixState;
+
+/*
+* Intel supports 6 types of prefixes, whereas AMD supports 5 types (lock is seperated from rep/nz).
+* REX is the fifth prefix type, this time I'm based on AMD64.
+* VEX is the 6th, though it can't be repeated.
+*/
+#define MAX_PREFIXES (5)
+
+int prefixes_is_valid(unsigned int ch, _DecodeType dt);
+void prefixes_ignore(_PrefixState* ps, _PrefixIndexer pi);
+void prefixes_ignore_all(_PrefixState* ps);
+uint16_t prefixes_set_unused_mask(_PrefixState* ps);
+void prefixes_decode(const uint8_t* code, int codeLen, _PrefixState* ps, _DecodeType dt);
+void prefixes_use_segment(_iflags defaultSeg, _PrefixState* ps, _DecodeType dt, _DInst* di);
+
+#endif /* PREFIX_H */