commonmarker 0.0.1 → 0.1.0

data/test/progit/th/02-git-basics/01-chapter2.markdown

@@ -0,0 +1,1126 @@
+# Git ขั้นพื้นฐาน #
+
+ถ้าคุณมีเวลาอ่านแค่บทเดียวเพื่อจะเริ่มใช้งาน Git ก็ให้อ่านบทนี้ล่ะ  เพราะบทนี้ครอบคลุมเนื้อหาเกี่ยวกับคำสั่งขั้นพื้นฐานของ Git ที่คุณต้องใช้ในการทำงานประจำวันบ่อย ๆ  เมื่ออ่านถึงท้ายบทคุณจะได้เรียนรู้วิธีการตั้งค่าและสร้าง repository ใหม่ เริ่มเก็บประวัติของแฟ้ม stage และ commit การแก้ไข รวมไปถึงการตั้งค่าให้ Git เพิกเฉยต่อแฟ้มที่คุณไม่ต้องการเก็บประวัติ การยกเลิก commit ที่ผิดพลาด การดูประวัติของโปรเจคของคุณ การแสดงความต่างระหว่างสอง commit และการ push และ pull จาก remote repository
+
+## เริ่มต้นใช้งาน Git Repository ##
+
+คุณสามารถสร้างโปรเจคใน Git โดยใช้สองวิธีหลัก วิธีแรกคือการนำเข้าโปรเจคหรือแฟ้มข้อมูลที่มีอยู่แล้วเข้าไปใน Git ส่วนวิธีที่สองคือการ clone จาก repository ที่อยู่ในเซิร์ฟเวอร์อื่น
+
+### การสร้าง Repository จากแฟ้มข้อมูลที่มีอยู่แล้ว ###
+
+สำหรับวิธีนี้ ให้ไปที่แฟ้มข้อมูลที่คุณต้องการเริ่มใช้งาน Git และพิมพ์คำสั่ง
+
+	$ git init
+
+คำสั่งนี้จะสร้างแฟ้มข้อมูลย่อยชื่อ .git ซึ่งเก็บแฟ้มโครงสร้างของ Git repository เปล่า ๆ ที่ยังไม่มีเนื้อหาใด   ในขั้นตอนนี้แฟ้มที่อยู่ในโปรเจคของคุณจะยังไม่ถูก track โดย Git (กรุณาอ่านบทที่ 9 ถ้าคุณต้องการรู้ว่าแฟ้มที่อยู่ใน .git ที่คุณเพิ่งสร้างขึ้นมานั้นเก็บข้อมูลอะไรบ้าง)
+
+เพื่อที่จะเริ่มเก็บประวัติการแก้ไขของแฟ้มที่มีอยู่ คุณจะต้องเพิ่มแฟ้มเข้าไปใน repository เสียก่อน โดยใช้คำสั่ง git add กับแฟ้มที่คุณต้องการเก็บประวัติ ตามด้วยการ commit:
+
+	$ git add *.c
+	$ git add README
+	$ git commit –m 'เริ่มเก็บประวัติ'
+
+หลังจาก commit คุณก็จะได้ repository ที่เริ่มเก็บประวัติของแฟ้มต่าง ๆ ในโปรเจคของคุณแล้ว
+
+### การ clone จาก repository ที่มีอยู่แล้ว ###
+
+ถ้าคุณต้องการคัดลอก repository ที่มีอยู่แล้ว - ยกตัวอย่างเช่น จากโปรเจคที่คุณอยากมีส่วนร่วม - คำสั่งที่คุณต้องใช้คือ git clone  ถ้าคุณเคยใช้ระบบ VCS อื่นอย่าง Subversion คุณจะสังเกตเห็นว่าคำสั่งคือ clone ไม่ใช่ checkout ซึ่งความแตกต่างนี้เป็นความแตกต่างที่สำคัญมาก เพราะมันหมายความว่า Git ทำการคัดลอกข้อมูลเกือบทุกอย่างที่อยู่ในเซิร์ฟเวอร์ ทุกเวอร์ชั่นของทุกแฟ้มมีมีในประวัติของโปรเจคจะถูกคัดลอกมายังเครื่องของคุณเมื่อคุณใช้คำสั่ง `git clone`  ในความเป็นจริงถ้าเกิดดิสก์ของเซิร์ฟเวอร์เกิดเสียขึ้นมา คุณสามารถใช้ clone ตัวใดก็ได้เพื่อกู้ข้อมูลกลับไป ณ ตอนที่คุณทำการสร้าง clone นั้น (แต่คุณก็อาจเสีย server-side hooks ฯลฯ ที่มีอยู่ในเซิร์ฟเวอร์ไป - อ่านข้อมูลเพิ่มเติมที่บทที่ 4)
+
+คุณจะต้องใช้คำสั่ง `git clone [url]` เพื่อทำการ clone repository  ยกตัวอย่างเช่น ถ้าคุณต้องการ clone ไลบรารี่ Ruby ที่ชื่อ Grit คุณสามารถทำได้โดยใช้คำสั่งดังนี้:
+
+	$ git clone git://github.com/schacon/grit.git
+
+คำสั่งดังกล่าวจะสร้างไดเรกทอรี่ชื่อ "grit" และสร้างไดเรกทอรี่ย่อยชื่อ `.git` จากนั้นจะทำการดึงข้อมูลทั้งหมดทีมีอยู่ใน repository และ check out working copy เวอร์ชั่นล่าสุด  ถ้าคุณดูใน `grit` คุณจะเห็นแฟ้มที่อยู่ในโปรเจคทั้งหมดที่คุณสามารถเริ่มใช้งานได้ทันที ถ้าคุณต้องการ clone repository ไปที่ไดเรกทอรี่ชื่ออื่น คุณสามารถระบุชื่อที่คุณต้องการได้ต่อท้ายคำสั่งด้านบน:
+
+	$ git clone git://github.com/schacon/grit.git mygrit
+
+คำสั่งนี้ทำงานเหมือนคำสั่งด้านบน แต่เก็บข้อมูลในไดเรกทอรี่ mygrit แทน
+
+Git มีโพรโทคอลสำหรับโอนข้อมูลหลายแบบ ตัวอย่างด้านบนใช้โพรโทคอล `git://` แต่คุณสามารถใช้ `http(s)://` หรือ `user@server:path.git` ซึ่งใช้ SSH ได้เหมือนกัน  ลองอ่านบทที่ 4 เพื่อดูวิธีตั้งค่าเครื่องเซิร์ฟเวอร์ของคุณ และข้อดีและข้อเสียของแต่ละโพรโตคอล
+
+## การบันทึกการแก้ไขใน Repository ##
+
+หลังจากทำการคัดลอง repository และได้แฟ้มต่าง ๆ มา คุณสามารถทำการแก้ไขและ commit เพื่อจัดเก็บการแก้ไขเข้าไปใน repository เมื่อคุณต้องการ
+
+ขอให้จำไว้ว่าแฟ้มแต่ละแฟ้มใน working directory มีสถานะอยู่สองสถานะ คือ tracked หรือ untracked  แฟ้มที่อยู่ในสถานะ tracked คือแฟ้มที่อยู่ใน snapshot ล่าสุด เป็นแฟ้มที่คุณสามารถกู้เนื้อหากลับมา แก้ไข หรือ stage ได้  ส่วนแฟ้มที่อยู่ในสถานะ untracked คือแฟ้มที่ไม่อยู่ใน snapshot ล่าสุดและไม่อยู่ใน staging area  หลักจากคุณ clone repository แฟ้มทั้งหมดจะอยู่ในสถานะ tracked เพราะคุณเพิ่ง check out ออกมา
+
+เมื่อคุณทำการแก้ไข แฟ้มที่ถูกแก้ไขจะอยู่ในสถานะถูกแก้ไขเพราะเนื้อหาได้ถูกเปลี่ยนไป ถ้าคุณต้องการจัดเก็บการแก้ไข คุณต้อง stage แฟ้มเหล่านั้นและ commit สิ่งที่คุณ stage เอาไว้ ตามรูป 2-1
+
+Insert 18333fig0201.png 
+รูปที่ 2-1. วงจรสถานะของแฟ้ม
+
+### การตรวจสอบสถานะของแฟ้ม ###
+
+เครื่องมือหลักในการตรวจสอบสถานะของแฟ้มคือคำสั่ง git status ถ้าคุณใช้คำสั่งนี้ทันทีหลังจาก clone repository คุณจะเห็นผลลัพธ์ประมาณนี้:
+
+	$ git status
+	# On branch master
+	nothing to commit, working directory clean
+
+ผลลัพธ์ด้านบนหมายความว่าไดเรกทอรีของคุณยังสะอาดอยู่ นั่นก็คือไม่มีการแก้ไขแฟ้มที่ถูก track และ ไม่มีแฟ้มที่อยู่ในสถานะ untracked ในไดเรกทอรี นอกจากนั้นคำสั่งนี้ยังบอกว่าคุณอยู่ใน branch ชื่อ master ซึ่งเป็น branch เริ่มต้นอยู่แล้ว เราจะลงรายละเอียดเกี่ยวกับ branch และ reference ในบทถัดไป
+
+สมมุติว่าคุณสร้างแฟ้มข้อมูลใหม่ เช่น README ซึ่งไม่เคยมีมาก่อน เมื่อคุณใช้คำสั่ง `git status` คุณจะเห็นสถานะของแฟ้มเป็น untracked:
+
+	$ vim README
+	$ git status
+	# On branch master
+	# Untracked files:
+	#   (use "git add <file>..." to include in what will be committed)
+	#
+	#	README
+	nothing added to commit but untracked files present (use "git add" to track)
+
+คุณจะเห็นว่าแฟ้ม README อยู่ในสถานะ untracked เพราะว่ามันอยู่ภายใต้หัวข้อ "Untracked files" ในผลลัพธ์ของคำสั่ง ความหมายของ untracked คือแฟ้มข้อมูลนี้ไม่อยู่ใน snapshot (commit) ล่าสุด และ Git จะไม่รวมแฟ้มข้อมูลนี้ใน commit ถัดไปนอกเสียจากว่าคุณบอกให้ Git ทำ เหตุผลที่ Git ทำงานแบบนี้ก็เพื่อป้องกันไม่ให้แฟ้มไบนารีหรือแฟ้มข้อมูลอื่น ๆ ถูกเพิ่มเข้าไปใน repository โดยไม่ได้ตั้งใจ  ในกรณีนี้เนื่องจากคุณต้องการเพิ่มแฟ้ม README อ่านวิธีการเพิ่มแฟ้มใหม่ในส่วนถัดไปได้เลย
+
+### การเพิ่มแฟ้มข้อมูลใหม่ ###
+
+คุณสามารถเพิ่มแฟ้มข้อมูลใหม่โดยใช้คำสั่ง `git add`:
+
+	$ git add README
+
+ถ้าคุณใช้คำสั่ง status อีกครั้ง คุณจะเห็นว่าแฟ้ม README มีสถานะเป็น tracked และถูก staged เรียบร้อย:
+
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#	new file:   README
+	#
+
+You can tell that it’s staged because it’s under the “Changes to be committed” heading. If you commit at this point, the version of the file at the time you ran git add is what will be in the historical snapshot. You may recall that when you ran git init earlier, you then ran git add (files) — that was to begin tracking files in your directory. The git add command takes a path name for either a file or a directory; if it’s a directory, the command adds all the files in that directory recursively.
+
+### การ Stage แฟ้มที่ถูกแก้ไข ###
+
+Let’s change a file that was already tracked. If you change a previously tracked file called `benchmarks.rb` and then run your `status` command again, you get something that looks like this:
+
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#	new file:   README
+	#
+	# Changes not staged for commit:
+	#   (use "git add <file>..." to update what will be committed)
+	#
+	#	modified:   benchmarks.rb
+	#
+
+The benchmarks.rb file appears under a section named “Changes not staged for commit” — which means that a file that is tracked has been modified in the working directory but not yet staged. To stage it, you run the `git add` command (it’s a multipurpose command — you use it to begin tracking new files, to stage files, and to do other things like marking merge-conflicted files as resolved). Let’s run `git add` now to stage the benchmarks.rb file, and then run `git status` again:
+
+	$ git add benchmarks.rb
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#	new file:   README
+	#	modified:   benchmarks.rb
+	#
+
+Both files are staged and will go into your next commit. At this point, suppose you remember one little change that you want to make in benchmarks.rb before you commit it. You open it again and make that change, and you’re ready to commit. However, let’s run `git status` one more time:
+
+	$ vim benchmarks.rb 
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#	new file:   README
+	#	modified:   benchmarks.rb
+	#
+	# Changes not staged for commit:
+	#   (use "git add <file>..." to update what will be committed)
+	#
+	#	modified:   benchmarks.rb
+	#
+
+What the heck? Now benchmarks.rb is listed as both staged and unstaged. How is that possible? It turns out that Git stages a file exactly as it is when you run the git add command. If you commit now, the version of benchmarks.rb as it was when you last ran the git add command is how it will go into the commit, not the version of the file as it looks in your working directory when you run git commit. If you modify a file after you run `git add`, you have to run `git add` again to stage the latest version of the file:
+
+	$ git add benchmarks.rb
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#	new file:   README
+	#	modified:   benchmarks.rb
+	#
+
+### Ignoring Files ###
+
+Often, you’ll have a class of files that you don’t want Git to automatically add or even show you as being untracked. These are generally automatically generated files such as log files or files produced by your build system. In such cases, you can create a file listing patterns to match them named .gitignore.  Here is an example .gitignore file:
+
+	$ cat .gitignore
+	*.[oa]
+	*~
+
+The first line tells Git to ignore any files ending in .o or .a — object and archive files that may be the product of building your code. The second line tells Git to ignore all files that end with a tilde (`~`), which is used by many text editors such as Emacs to mark temporary files. You may also include a log, tmp, or pid directory; automatically generated documentation; and so on. Setting up a .gitignore file before you get going is generally a good idea so you don’t accidentally commit files that you really don’t want in your Git repository.
+
+The rules for the patterns you can put in the .gitignore file are as follows:
+
+*	Blank lines or lines starting with # are ignored.
+*	Standard glob patterns work.
+*	You can end patterns with a forward slash (`/`) to specify a directory.
+*	You can negate a pattern by starting it with an exclamation point (`!`).
+
+Glob patterns are like simplified regular expressions that shells use. An asterisk (`*`) matches zero or more characters; `[abc]` matches any character inside the brackets (in this case a, b, or c); a question mark (`?`) matches a single character; and brackets enclosing characters separated by a hyphen(`[0-9]`) matches any character between them (in this case 0 through 9) . 
+
+Here is another example .gitignore file:
+
+	# a comment – this is ignored
+	# no .a files
+	*.a
+	# but do track lib.a, even though you're ignoring .a files above
+	!lib.a
+	# only ignore the root TODO file, not subdir/TODO
+	/TODO
+	# ignore all files in the build/ directory
+	build/
+	# ignore doc/notes.txt, but not doc/server/arch.txt
+	doc/*.txt
+
+### Viewing Your Staged and Unstaged Changes ###
+
+If the `git status` command is too vague for you — you want to know exactly what you changed, not just which files were changed — you can use the `git diff` command. We’ll cover `git diff` in more detail later; but you’ll probably use it most often to answer these two questions: What have you changed but not yet staged? And what have you staged that you are about to commit? Although `git status` answers those questions very generally, `git diff` shows you the exact lines added and removed — the patch, as it were. 
+
+Let’s say you edit and stage the README file again and then edit the benchmarks.rb file without staging it. If you run your `status` command, you once again see something like this:
+
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#	new file:   README
+	#
+	# Changes not staged for commit:
+	#   (use "git add <file>..." to update what will be committed)
+	#
+	#	modified:   benchmarks.rb
+	#
+
+To see what you’ve changed but not yet staged, type `git diff` with no other arguments:
+
+	$ git diff
+	diff --git a/benchmarks.rb b/benchmarks.rb
+	index 3cb747f..da65585 100644
+	--- a/benchmarks.rb
+	+++ b/benchmarks.rb
+	@@ -36,6 +36,10 @@ def main
+	           @commit.parents[0].parents[0].parents[0]
+	         end
+
+	+        run_code(x, 'commits 1') do
+	+          git.commits.size
+	+        end
+	+
+	         run_code(x, 'commits 2') do
+	           log = git.commits('master', 15)
+	           log.size
+
+That command compares what is in your working directory with what is in your staging area. The result tells you the changes you’ve made that you haven’t yet staged.
+
+If you want to see what you’ve staged that will go into your next commit, you can use `git diff –-cached`. (In Git versions 1.6.1 and later, you can also use `git diff –-staged`, which may be easier to remember.) This command compares your staged changes to your last commit:
+
+	$ git diff --cached
+	diff --git a/README b/README
+	new file mode 100644
+	index 0000000..03902a1
+	--- /dev/null
+	+++ b/README2
+	@@ -0,0 +1,5 @@
+	+grit
+	+ by Tom Preston-Werner, Chris Wanstrath
+	+ http://github.com/mojombo/grit
+	+
+	+Grit is a Ruby library for extracting information from a Git repository
+
+It’s important to note that `git diff` by itself doesn’t show all changes made since your last commit — only changes that are still unstaged. This can be confusing, because if you’ve staged all of your changes, `git diff` will give you no output.
+
+For another example, if you stage the benchmarks.rb file and then edit it, you can use `git diff` to see the changes in the file that are staged and the changes that are unstaged:
+
+	$ git add benchmarks.rb
+	$ echo '# test line' >> benchmarks.rb
+	$ git status
+	# On branch master
+	#
+	# Changes to be committed:
+	#
+	#	modified:   benchmarks.rb
+	#
+	# Changes not staged for commit:
+	#
+	#	modified:   benchmarks.rb
+	#
+
+Now you can use `git diff` to see what is still unstaged
+
+	$ git diff 
+	diff --git a/benchmarks.rb b/benchmarks.rb
+	index e445e28..86b2f7c 100644
+	--- a/benchmarks.rb
+	+++ b/benchmarks.rb
+	@@ -127,3 +127,4 @@ end
+	 main()
+
+	 ##pp Grit::GitRuby.cache_client.stats 
+	+# test line
+
+and `git diff --cached` to see what you’ve staged so far:
+
+	$ git diff --cached
+	diff --git a/benchmarks.rb b/benchmarks.rb
+	index 3cb747f..e445e28 100644
+	--- a/benchmarks.rb
+	+++ b/benchmarks.rb
+	@@ -36,6 +36,10 @@ def main
+	          @commit.parents[0].parents[0].parents[0]
+	        end
+
+	+        run_code(x, 'commits 1') do
+	+          git.commits.size
+	+        end
+	+              
+	        run_code(x, 'commits 2') do
+	          log = git.commits('master', 15)
+	          log.size
+
+### Committing Your Changes ###
+
+Now that your staging area is set up the way you want it, you can commit your changes. Remember that anything that is still unstaged — any files you have created or modified that you haven’t run `git add` on since you edited them — won’t go into this commit. They will stay as modified files on your disk.
+In this case, the last time you ran `git status`, you saw that everything was staged, so you’re ready to commit your changes. The simplest way to commit is to type `git commit`:
+
+	$ git commit
+
+Doing so launches your editor of choice. (This is set by your shell’s `$EDITOR` environment variable — usually vim or emacs, although you can configure it with whatever you want using the `git config --global core.editor` command as you saw in Chapter 1). 
+
+The editor displays the following text (this example is a Vim screen):
+
+	# Please enter the commit message for your changes. Lines starting
+	# with '#' will be ignored, and an empty message aborts the commit.
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#       new file:   README
+	#       modified:   benchmarks.rb 
+	~
+	~
+	~
+	".git/COMMIT_EDITMSG" 10L, 283C
+
+You can see that the default commit message contains the latest output of the `git status` command commented out and one empty line on top. You can remove these comments and type your commit message, or you can leave them there to help you remember what you’re committing. (For an even more explicit reminder of what you’ve modified, you can pass the `-v` option to `git commit`. Doing so also puts the diff of your change in the editor so you can see exactly what you did.) When you exit the editor, Git creates your commit with that commit message (with the comments and diff stripped out).
+
+Alternatively, you can type your commit message inline with the `commit` command by specifying it after a -m flag, like this:
+
+	$ git commit -m "Story 182: Fix benchmarks for speed"
+	[master]: created 463dc4f: "Fix benchmarks for speed"
+	 2 files changed, 3 insertions(+), 0 deletions(-)
+	 create mode 100644 README
+
+Now you’ve created your first commit! You can see that the commit has given you some output about itself: which branch you committed to (master), what SHA-1 checksum the commit has (`463dc4f`), how many files were changed, and statistics about lines added and removed in the commit.
+
+Remember that the commit records the snapshot you set up in your staging area. Anything you didn’t stage is still sitting there modified; you can do another commit to add it to your history. Every time you perform a commit, you’re recording a snapshot of your project that you can revert to or compare to later.
+
+### Skipping the Staging Area ###
+
+Although it can be amazingly useful for crafting commits exactly how you want them, the staging area is sometimes a bit more complex than you need in your workflow. If you want to skip the staging area, Git provides a simple shortcut. Providing the `-a` option to the `git commit` command makes Git automatically stage every file that is already tracked before doing the commit, letting you skip the `git add` part:
+
+	$ git status
+	# On branch master
+	#
+	# Changes not staged for commit:
+	#
+	#	modified:   benchmarks.rb
+	#
+	$ git commit -a -m 'added new benchmarks'
+	[master 83e38c7] added new benchmarks
+	 1 files changed, 5 insertions(+), 0 deletions(-)
+
+Notice how you don’t have to run `git add` on the benchmarks.rb file in this case before you commit.
+
+### Removing Files ###
+
+To remove a file from Git, you have to remove it from your tracked files (more accurately, remove it from your staging area) and then commit. The `git rm` command does that and also removes the file from your working directory so you don’t see it as an untracked file next time around.
+
+If you simply remove the file from your working directory, it shows up under the “Changes not staged for commit” (that is, _unstaged_) area of your `git status` output:
+
+	$ rm grit.gemspec
+	$ git status
+	# On branch master
+	#
+	# Changes not staged for commit:
+	#   (use "git add/rm <file>..." to update what will be committed)
+	#
+	#       deleted:    grit.gemspec
+	#
+
+Then, if you run `git rm`, it stages the file’s removal:
+
+	$ git rm grit.gemspec
+	rm 'grit.gemspec'
+	$ git status
+	# On branch master
+	#
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#       deleted:    grit.gemspec
+	#
+
+The next time you commit, the file will be gone and no longer tracked. If you modified the file and added it to the index already, you must force the removal with the `-f` option. This is a safety feature to prevent accidental removal of data that hasn’t yet been recorded in a snapshot and that can’t be recovered from Git.
+
+Another useful thing you may want to do is to keep the file in your working tree but remove it from your staging area. In other words, you may want to keep the file on your hard drive but not have Git track it anymore. This is particularly useful if you forgot to add something to your `.gitignore` file and accidentally added it, like a large log file or a bunch of `.a` compiled files. To do this, use the `--cached` option:
+
+	$ git rm --cached readme.txt
+
+You can pass files, directories, and file-glob patterns to the `git rm` command. That means you can do things such as
+
+	$ git rm log/\*.log
+
+Note the backslash (`\`) in front of the `*`. This is necessary because Git does its own filename expansion in addition to your shell’s filename expansion. This command removes all files that have the `.log` extension in the `log/` directory. Or, you can do something like this:
+
+	$ git rm \*~
+
+This command removes all files that end with `~`.
+
+### Moving Files ###
+
+Unlike many other VCS systems, Git doesn’t explicitly track file movement. If you rename a file in Git, no metadata is stored in Git that tells it you renamed the file. However, Git is pretty smart about figuring that out after the fact — we’ll deal with detecting file movement a bit later.
+
+Thus it’s a bit confusing that Git has a `mv` command. If you want to rename a file in Git, you can run something like
+
+	$ git mv file_from file_to
+
+and it works fine. In fact, if you run something like this and look at the status, you’ll see that Git considers it a renamed file:
+
+	$ git mv README.txt README
+	$ git status
+	# On branch master
+	# Your branch is ahead of 'origin/master' by 1 commit.
+	#
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#       renamed:    README.txt -> README
+	#
+
+However, this is equivalent to running something like this:
+
+	$ mv README.txt README
+	$ git rm README.txt
+	$ git add README
+
+Git figures out that it’s a rename implicitly, so it doesn’t matter if you rename a file that way or with the `mv` command. The only real difference is that `mv` is one command instead of three — it’s a convenience function. More important, you can use any tool you like to rename a file, and address the add/rm later, before you commit.
+
+## Viewing the Commit History ##
+
+After you have created several commits, or if you have cloned a repository with an existing commit history, you’ll probably want to look back to see what has happened. The most basic and powerful tool to do this is the `git log` command.
+
+These examples use a very simple project called simplegit that I often use for demonstrations. To get the project, run 
+
+	git clone git://github.com/schacon/simplegit-progit.git
+
+When you run `git log` in this project, you should get output that looks something like this:
+
+	$ git log
+	commit ca82a6dff817ec66f44342007202690a93763949
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Mon Mar 17 21:52:11 2008 -0700
+
+	    changed the version number
+
+	commit 085bb3bcb608e1e8451d4b2432f8ecbe6306e7e7
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Sat Mar 15 16:40:33 2008 -0700
+
+	    removed unnecessary test code
+
+	commit a11bef06a3f659402fe7563abf99ad00de2209e6
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Sat Mar 15 10:31:28 2008 -0700
+
+	    first commit
+
+By default, with no arguments, `git log` lists the commits made in that repository in reverse chronological order. That is, the most recent commits show up first. As you can see, this command lists each commit with its SHA-1 checksum, the author’s name and e-mail, the date written, and the commit message.
+
+A huge number and variety of options to the `git log` command are available to show you exactly what you’re looking for. Here, we’ll show you some of the most-used options.
+
+One of the more helpful options is `-p`, which shows the diff introduced in each commit. You can also use `-2`, which limits the output to only the last two entries:
+
+	$ git log –p -2
+	commit ca82a6dff817ec66f44342007202690a93763949
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Mon Mar 17 21:52:11 2008 -0700
+
+	    changed the version number
+
+	diff --git a/Rakefile b/Rakefile
+	index a874b73..8f94139 100644
+	--- a/Rakefile
+	+++ b/Rakefile
+	@@ -5,7 +5,7 @@ require 'rake/gempackagetask'
+	 spec = Gem::Specification.new do |s|
+	-    s.version   =   "0.1.0"
+	+    s.version   =   "0.1.1"
+	     s.author    =   "Scott Chacon"
+
+	commit 085bb3bcb608e1e8451d4b2432f8ecbe6306e7e7
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Sat Mar 15 16:40:33 2008 -0700
+
+	    removed unnecessary test code
+
+	diff --git a/lib/simplegit.rb b/lib/simplegit.rb
+	index a0a60ae..47c6340 100644
+	--- a/lib/simplegit.rb
+	+++ b/lib/simplegit.rb
+	@@ -18,8 +18,3 @@ class SimpleGit
+	     end
+
+	 end
+	-
+	-if $0 == __FILE__
+	-  git = SimpleGit.new
+	-  puts git.show
+	-end
+	
+
+This option displays the same information but with a diff directly following each entry. This is very helpful for code review or to quickly browse what happened during a series of commits that a collaborator has added.
+You can also use a series of summarizing options with `git log`. For example, if you want to see some abbreviated stats for each commit, you can use the `--stat` option:
+
+	$ git log --stat 
+	commit ca82a6dff817ec66f44342007202690a93763949
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Mon Mar 17 21:52:11 2008 -0700
+
+	    changed the version number
+
+	 Rakefile |    2 +-
+	 1 files changed, 1 insertions(+), 1 deletions(-)
+
+	commit 085bb3bcb608e1e8451d4b2432f8ecbe6306e7e7
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Sat Mar 15 16:40:33 2008 -0700
+
+	    removed unnecessary test code
+
+	 lib/simplegit.rb |    5 -----
+	 1 files changed, 0 insertions(+), 5 deletions(-)
+
+	commit a11bef06a3f659402fe7563abf99ad00de2209e6
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Sat Mar 15 10:31:28 2008 -0700
+
+	    first commit
+
+	 README           |    6 ++++++
+	 Rakefile         |   23 +++++++++++++++++++++++
+	 lib/simplegit.rb |   25 +++++++++++++++++++++++++
+	 3 files changed, 54 insertions(+), 0 deletions(-)
+
+As you can see, the `--stat` option prints below each commit entry a list of modified files, how many files were changed, and how many lines in those files were added and removed. It also puts a summary of the information at the end.
+Another really useful option is `--pretty`. This option changes the log output to formats other than the default. A few prebuilt options are available for you to use. The oneline option prints each commit on a single line, which is useful if you’re looking at a lot of commits. In addition, the `short`, `full`, and `fuller` options show the output in roughly the same format but with less or more information, respectively:
+
+	$ git log --pretty=oneline
+	ca82a6dff817ec66f44342007202690a93763949 changed the version number
+	085bb3bcb608e1e8451d4b2432f8ecbe6306e7e7 removed unnecessary test code
+	a11bef06a3f659402fe7563abf99ad00de2209e6 first commit
+
+The most interesting option is `format`, which allows you to specify your own log output format. This is especially useful when you’re generating output for machine parsing — because you specify the format explicitly, you know it won’t change with updates to Git:
+
+	$ git log --pretty=format:"%h - %an, %ar : %s"
+	ca82a6d - Scott Chacon, 11 months ago : changed the version number
+	085bb3b - Scott Chacon, 11 months ago : removed unnecessary test code
+	a11bef0 - Scott Chacon, 11 months ago : first commit
+
+Table 2-1 lists some of the more useful options that format takes.
+
+	Option	Description of Output
+	%H	Commit hash
+	%h	Abbreviated commit hash
+	%T	Tree hash
+	%t	Abbreviated tree hash
+	%P	Parent hashes
+	%p	Abbreviated parent hashes
+	%an	Author name
+	%ae	Author e-mail
+	%ad	Author date (format respects the –date= option)
+	%ar	Author date, relative
+	%cn	Committer name
+	%ce	Committer email
+	%cd	Committer date
+	%cr	Committer date, relative
+	%s	Subject
+
+You may be wondering what the difference is between _author_ and _committer_. The author is the person who originally wrote the work, whereas the committer is the person who last applied the work. So, if you send in a patch to a project and one of the core members applies the patch, both of you get credit — you as the author and the core member as the committer. We’ll cover this distinction a bit more in Chapter 5.
+
+The oneline and format options are particularly useful with another `log` option called `--graph`. This option adds a nice little ASCII graph showing your branch and merge history, which we can see our copy of the Grit project repository:
+
+	$ git log --pretty=format:"%h %s" --graph
+	* 2d3acf9 ignore errors from SIGCHLD on trap
+	*  5e3ee11 Merge branch 'master' of git://github.com/dustin/grit
+	|\  
+	| * 420eac9 Added a method for getting the current branch.
+	* | 30e367c timeout code and tests
+	* | 5a09431 add timeout protection to grit
+	* | e1193f8 support for heads with slashes in them
+	|/  
+	* d6016bc require time for xmlschema
+	*  11d191e Merge branch 'defunkt' into local
+
+Those are only some simple output-formatting options to `git log` — there are many more. Table 2-2 lists the options we’ve covered so far and some other common formatting options that may be useful, along with how they change the output of the log command.
+
+	Option	Description
+	-p	Show the patch introduced with each commit.
+	--stat	Show statistics for files modified in each commit.
+	--shortstat	Display only the changed/insertions/deletions line from the --stat command.
+	--name-only	Show the list of files modified after the commit information.
+	--name-status	Show the list of files affected with added/modified/deleted information as well.
+	--abbrev-commit	Show only the first few characters of the SHA-1 checksum instead of all 40.
+	--relative-date	Display the date in a relative format (for example, “2 weeks ago”) instead of using the full date format.
+	--graph	Display an ASCII graph of the branch and merge history beside the log output.
+	--pretty	Show commits in an alternate format. Options include oneline, short, full, fuller, and format (where you specify your own format).
+
+### Limiting Log Output ###
+
+In addition to output-formatting options, git log takes a number of useful limiting options — that is, options that let you show only a subset of commits. You’ve seen one such option already — the `-2` option, which show only the last two commits. In fact, you can do `-<n>`, where `n` is any integer to show the last `n` commits. In reality, you’re unlikely to use that often, because Git by default pipes all output through a pager so you see only one page of log output at a time.
+
+However, the time-limiting options such as `--since` and `--until` are very useful. For example, this command gets the list of commits made in the last two weeks:
+
+	$ git log --since=2.weeks
+
+This command works with lots of formats — you can specify a specific date (“2008-01-15”) or a relative date such as “2 years 1 day 3 minutes ago”.
+
+You can also filter the list to commits that match some search criteria. The `--author` option allows you to filter on a specific author, and the `--grep` option lets you search for keywords in the commit messages. (Note that if you want to specify both author and grep options, you have to add `--all-match` or the command will match commits with either.)
+
+The last really useful option to pass to `git log` as a filter is a path. If you specify a directory or file name, you can limit the log output to commits that introduced a change to those files. This is always the last option and is generally preceded by double dashes (`--`) to separate the paths from the options.
+
+In Table 2-3 we’ll list these and a few other common options for your reference.
+
+	Option	Description
+	-(n)	Show only the last n commits
+	--since, --after	Limit the commits to those made after the specified date.
+	--until, --before	Limit the commits to those made before the specified date.
+	--author	Only show commits in which the author entry matches the specified string.
+	--committer	Only show commits in which the committer entry matches the specified string.
+
+For example, if you want to see which commits modifying test files in the Git source code history were committed by Junio Hamano and were not merges in the month of October 2008, you can run something like this:
+
+	$ git log --pretty="%h - %s" --author=gitster --since="2008-10-01" \
+	   --before="2008-11-01" --no-merges -- t/
+	5610e3b - Fix testcase failure when extended attribute
+	acd3b9e - Enhance hold_lock_file_for_{update,append}()
+	f563754 - demonstrate breakage of detached checkout wi
+	d1a43f2 - reset --hard/read-tree --reset -u: remove un
+	51a94af - Fix "checkout --track -b newbranch" on detac
+	b0ad11e - pull: allow "git pull origin $something:$cur
+
+Of the nearly 20,000 commits in the Git source code history, this command shows the 6 that match those criteria.
+
+### Using a GUI to Visualize History ###
+
+If you like to use a more graphical tool to visualize your commit history, you may want to take a look at a Tcl/Tk program called gitk that is distributed with Git. Gitk is basically a visual `git log` tool, and it accepts nearly all the filtering options that `git log` does. If you type gitk on the command line in your project, you should see something like Figure 2-2.
+
+Insert 18333fig0202.png 
+Figure 2-2. The gitk history visualizer.
+
+You can see the commit history in the top half of the window along with a nice ancestry graph. The diff viewer in the bottom half of the window shows you the changes introduced at any commit you click.
+
+## Undoing Things ##
+
+At any stage, you may want to undo something. Here, we’ll review a few basic tools for undoing changes that you’ve made. Be careful, because you can’t always undo some of these undos. This is one of the few areas in Git where you may lose some work if you do it wrong.
+
+### Changing Your Last Commit ###
+
+One of the common undos takes place when you commit too early and possibly forget to add some files, or you mess up your commit message. If you want to try that commit again, you can run commit with the `--amend` option:
+
+	$ git commit --amend
+
+This command takes your staging area and uses it for the commit. If you’ve have made no changes since your last commit (for instance, you run this command immediately after your previous commit), then your snapshot will look exactly the same and all you’ll change is your commit message.
+
+The same commit-message editor fires up, but it already contains the message of your previous commit. You can edit the message the same as always, but it overwrites your previous commit.
+
+As an example, if you commit and then realize you forgot to stage the changes in a file you wanted to add to this commit, you can do something like this:
+
+	$ git commit -m 'initial commit'
+	$ git add forgotten_file
+	$ git commit --amend 
+
+All three of these commands end up with a single commit — the second commit replaces the results of the first.
+
+### Unstaging a Staged File ###
+
+The next two sections demonstrate how to wrangle your staging area and working directory changes. The nice part is that the command you use to determine the state of those two areas also reminds you how to undo changes to them. For example, let’s say you’ve changed two files and want to commit them as two separate changes, but you accidentally type `git add *` and stage them both. How can you unstage one of the two? The `git status` command reminds you:
+
+	$ git add .
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#       modified:   README.txt
+	#       modified:   benchmarks.rb
+	#
+
+Right below the “Changes to be committed” text, it says use `git reset HEAD <file>...` to unstage. So, let’s use that advice to unstage the benchmarks.rb file:
+
+	$ git reset HEAD benchmarks.rb 
+	benchmarks.rb: locally modified
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#       modified:   README.txt
+	#
+	# Changes not staged for commit:
+	#   (use "git add <file>..." to update what will be committed)
+	#   (use "git checkout -- <file>..." to discard changes in working directory)
+	#
+	#       modified:   benchmarks.rb
+	#
+
+The command is a bit strange, but it works. The benchmarks.rb file is modified but once again unstaged.
+
+### Unmodifying a Modified File ###
+
+What if you realize that you don’t want to keep your changes to the benchmarks.rb file? How can you easily unmodify it — revert it back to what it looked like when you last committed (or initially cloned, or however you got it into your working directory)? Luckily, `git status` tells you how to do that, too. In the last example output, the unstaged area looks like this:
+
+	# Changes not staged for commit:
+	#   (use "git add <file>..." to update what will be committed)
+	#   (use "git checkout -- <file>..." to discard changes in working directory)
+	#
+	#       modified:   benchmarks.rb
+	#
+
+It tells you pretty explicitly how to discard the changes you’ve made (at least, the newer versions of Git, 1.6.1 and later, do this — if you have an older version, we highly recommend upgrading it to get some of these nicer usability features). Let’s do what it says:
+
+	$ git checkout -- benchmarks.rb
+	$ git status
+	# On branch master
+	# Changes to be committed:
+	#   (use "git reset HEAD <file>..." to unstage)
+	#
+	#       modified:   README.txt
+	#
+
+You can see that the changes have been reverted. You should also realize that this is a dangerous command: any changes you made to that file are gone — you just copied another file over it. Don’t ever use this command unless you absolutely know that you don’t want the file. If you just need to get it out of the way, we’ll go over stashing and branching in the next chapter; these are generally better ways to go. 
+
+Remember, anything that is committed in Git can almost always be recovered. Even commits that were on branches that were deleted or commits that were overwritten with an `--amend` commit can be recovered (see Chapter 9 for data recovery). However, anything you lose that was never committed is likely never to be seen again.
+
+## Working with Remotes ##
+
+To be able to collaborate on any Git project, you need to know how to manage your remote repositories. Remote repositories are versions of your project that are hosted on the Internet or network somewhere. You can have several of them, each of which generally is either read-only or read/write for you. Collaborating with others involves managing these remote repositories and pushing and pulling data to and from them when you need to share work.
+Managing remote repositories includes knowing how to add remote repositories, remove remotes that are no longer valid, manage various remote branches and define them as being tracked or not, and more. In this section, we’ll cover these remote-management skills.
+
+### Showing Your Remotes ###
+
+To see which remote servers you have configured, you can run the git remote command. It lists the shortnames of each remote handle you’ve specified. If you’ve cloned your repository, you should at least see origin — that is the default name Git gives to the server you cloned from:
+
+	$ git clone git://github.com/schacon/ticgit.git
+	Initialized empty Git repository in /private/tmp/ticgit/.git/
+	remote: Counting objects: 595, done.
+	remote: Compressing objects: 100% (269/269), done.
+	remote: Total 595 (delta 255), reused 589 (delta 253)
+	Receiving objects: 100% (595/595), 73.31 KiB | 1 KiB/s, done.
+	Resolving deltas: 100% (255/255), done.
+	$ cd ticgit
+	$ git remote 
+	origin
+
+You can also specify `-v`, which shows you the URL that Git has stored for the shortname to be expanded to:
+
+	$ git remote -v
+	origin	git://github.com/schacon/ticgit.git
+
+If you have more than one remote, the command lists them all. For example, my Grit repository looks something like this.
+
+	$ cd grit
+	$ git remote -v
+	bakkdoor  git://github.com/bakkdoor/grit.git
+	cho45     git://github.com/cho45/grit.git
+	defunkt   git://github.com/defunkt/grit.git
+	koke      git://github.com/koke/grit.git
+	origin    git@github.com:mojombo/grit.git
+
+This means we can pull contributions from any of these users pretty easily. But notice that only the origin remote is an SSH URL, so it’s the only one I can push to (we’ll cover why this is in Chapter 4).
+
+### Adding Remote Repositories ###
+
+I’ve mentioned and given some demonstrations of adding remote repositories in previous sections, but here is how to do it explicitly. To add a new remote Git repository as a shortname you can reference easily, run `git remote add [shortname] [url]`:
+
+	$ git remote
+	origin
+	$ git remote add pb git://github.com/paulboone/ticgit.git
+	$ git remote -v
+	origin	git://github.com/schacon/ticgit.git
+	pb	git://github.com/paulboone/ticgit.git
+
+Now you can use the string pb on the command line in lieu of the whole URL. For example, if you want to fetch all the information that Paul has but that you don’t yet have in your repository, you can run git fetch pb:
+
+	$ git fetch pb
+	remote: Counting objects: 58, done.
+	remote: Compressing objects: 100% (41/41), done.
+	remote: Total 44 (delta 24), reused 1 (delta 0)
+	Unpacking objects: 100% (44/44), done.
+	From git://github.com/paulboone/ticgit
+	 * [new branch]      master     -> pb/master
+	 * [new branch]      ticgit     -> pb/ticgit
+
+Paul’s master branch is accessible locally as `pb/master` — you can merge it into one of your branches, or you can check out a local branch at that point if you want to inspect it.
+
+### Fetching and Pulling from Your Remotes ###
+
+As you just saw, to get data from your remote projects, you can run:
+
+	$ git fetch [remote-name]
+
+The command goes out to that remote project and pulls down all the data from that remote project that you don’t have yet. After you do this, you should have references to all the branches from that remote, which you can merge in or inspect at any time. (We’ll go over what branches are and how to use them in much more detail in Chapter 3.)
+
+If you clone a repository, the command automatically adds that remote repository under the name origin. So, `git fetch origin` fetches any new work that has been pushed to that server since you cloned (or last fetched from) it. It’s important to note that the fetch command pulls the data to your local repository — it doesn’t automatically merge it with any of your work or modify what you’re currently working on. You have to merge it manually into your work when you’re ready.
+
+If you have a branch set up to track a remote branch (see the next section and Chapter 3 for more information), you can use the `git pull` command to automatically fetch and then merge a remote branch into your current branch. This may be an easier or more comfortable workflow for you; and by default, the `git clone` command automatically sets up your local master branch to track the remote master branch on the server you cloned from (assuming the remote has a master branch). Running `git pull` generally fetches data from the server you originally cloned from and automatically tries to merge it into the code you’re currently working on.
+
+### Pushing to Your Remotes ###
+
+When you have your project at a point that you want to share, you have to push it upstream. The command for this is simple: `git push [remote-name] [branch-name]`. If you want to push your master branch to your `origin` server (again, cloning generally sets up both of those names for you automatically), then you can run this to push your work back up to the server:
+
+	$ git push origin master
+
+This command works only if you cloned from a server to which you have write access and if nobody has pushed in the meantime. If you and someone else clone at the same time and they push upstream and then you push upstream, your push will rightly be rejected. You’ll have to pull down their work first and incorporate it into yours before you’ll be allowed to push. See Chapter 3 for more detailed information on how to push to remote servers.
+
+### Inspecting a Remote ###
+
+If you want to see more information about a particular remote, you can use the `git remote show [remote-name]` command. If you run this command with a particular shortname, such as `origin`, you get something like this:
+
+	$ git remote show origin
+	* remote origin
+	  URL: git://github.com/schacon/ticgit.git
+	  Remote branch merged with 'git pull' while on branch master
+	    master
+	  Tracked remote branches
+	    master
+	    ticgit
+
+It lists the URL for the remote repository as well as the tracking branch information. The command helpfully tells you that if you’re on the master branch and you run `git pull`, it will automatically merge in the master branch on the remote after it fetches all the remote references. It also lists all the remote references it has pulled down.
+
+That is a simple example you’re likely to encounter. When you’re using Git more heavily, however, you may see much more information from `git remote show`:
+
+	$ git remote show origin
+	* remote origin
+	  URL: git@github.com:defunkt/github.git
+	  Remote branch merged with 'git pull' while on branch issues
+	    issues
+	  Remote branch merged with 'git pull' while on branch master
+	    master
+	  New remote branches (next fetch will store in remotes/origin)
+	    caching
+	  Stale tracking branches (use 'git remote prune')
+	    libwalker
+	    walker2
+	  Tracked remote branches
+	    acl
+	    apiv2
+	    dashboard2
+	    issues
+	    master
+	    postgres
+	  Local branch pushed with 'git push'
+	    master:master
+
+This command shows which branch is automatically pushed when you run `git push` on certain branches. It also shows you which remote branches on the server you don’t yet have, which remote branches you have that have been removed from the server, and multiple branches that are automatically merged when you run `git pull`.
+
+### Removing and Renaming Remotes ###
+
+If you want to rename a reference, in newer versions of Git you can run `git remote rename` to change a remote’s shortname. For instance, if you want to rename `pb` to `paul`, you can do so with `git remote rename`:
+
+	$ git remote rename pb paul
+	$ git remote
+	origin
+	paul
+
+It’s worth mentioning that this changes your remote branch names, too. What used to be referenced at `pb/master` is now at `paul/master`.
+
+If you want to remove a reference for some reason — you’ve moved the server or are no longer using a particular mirror, or perhaps a contributor isn’t contributing anymore — you can use `git remote rm`:
+
+	$ git remote rm paul
+	$ git remote
+	origin
+
+## Tagging ##
+
+Like most VCSs, Git has the ability to tag specific points in history as being important. Generally, people use this functionality to mark release points (v1.0, and so on). In this section, you’ll learn how to list the available tags, how to create new tags, and what the different types of tags are.
+
+### Listing Your Tags ###
+
+Listing the available tags in Git is straightforward. Just type `git tag`:
+
+	$ git tag
+	v0.1
+	v1.3
+
+This command lists the tags in alphabetical order; the order in which they appear has no real importance.
+
+You can also search for tags with a particular pattern. The Git source repo, for instance, contains more than 240 tags. If you’re only interested in looking at the 1.4.2 series, you can run this:
+
+	$ git tag -l 'v1.4.2.*'
+	v1.4.2.1
+	v1.4.2.2
+	v1.4.2.3
+	v1.4.2.4
+
+### Creating Tags ###
+
+Git uses two main types of tags: lightweight and annotated. A lightweight tag is very much like a branch that doesn’t change — it’s just a pointer to a specific commit. Annotated tags, however, are stored as full objects in the Git database. They’re checksummed; contain the tagger name, e-mail, and date; have a tagging message; and can be signed and verified with GNU Privacy Guard (GPG). It’s generally recommended that you create annotated tags so you can have all this information; but if you want a temporary tag or for some reason don’t want to keep the other information, lightweight tags are available too.
+
+### Annotated Tags ###
+
+Creating an annotated tag in Git is simple. The easiest way is to specify `-a` when you run the `tag` command:
+
+	$ git tag -a v1.4 -m 'my version 1.4'
+	$ git tag
+	v0.1
+	v1.3
+	v1.4
+
+The `-m` specifies a tagging message, which is stored with the tag. If you don’t specify a message for an annotated tag, Git launches your editor so you can type it in.
+
+You can see the tag data along with the commit that was tagged by using the `git show` command:
+
+	$ git show v1.4
+	tag v1.4
+	Tagger: Scott Chacon <schacon@gee-mail.com>
+	Date:   Mon Feb 9 14:45:11 2009 -0800
+
+	my version 1.4
+	commit 15027957951b64cf874c3557a0f3547bd83b3ff6
+	Merge: 4a447f7... a6b4c97...
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Sun Feb 8 19:02:46 2009 -0800
+
+	    Merge branch 'experiment'
+
+That shows the tagger information, the date the commit was tagged, and the annotation message before showing the commit information.
+
+### Signed Tags ###
+
+You can also sign your tags with GPG, assuming you have a private key. All you have to do is use `-s` instead of `-a`:
+
+	$ git tag -s v1.5 -m 'my signed 1.5 tag'
+	You need a passphrase to unlock the secret key for
+	user: "Scott Chacon <schacon@gee-mail.com>"
+	1024-bit DSA key, ID F721C45A, created 2009-02-09
+
+If you run `git show` on that tag, you can see your GPG signature attached to it:
+
+	$ git show v1.5
+	tag v1.5
+	Tagger: Scott Chacon <schacon@gee-mail.com>
+	Date:   Mon Feb 9 15:22:20 2009 -0800
+
+	my signed 1.5 tag
+	-----BEGIN PGP SIGNATURE-----
+	Version: GnuPG v1.4.8 (Darwin)
+
+	iEYEABECAAYFAkmQurIACgkQON3DxfchxFr5cACeIMN+ZxLKggJQf0QYiQBwgySN
+	Ki0An2JeAVUCAiJ7Ox6ZEtK+NvZAj82/
+	=WryJ
+	-----END PGP SIGNATURE-----
+	commit 15027957951b64cf874c3557a0f3547bd83b3ff6
+	Merge: 4a447f7... a6b4c97...
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Sun Feb 8 19:02:46 2009 -0800
+
+	    Merge branch 'experiment'
+
+A bit later, you’ll learn how to verify signed tags.
+
+### Lightweight Tags ###
+
+Another way to tag commits is with a lightweight tag. This is basically the commit checksum stored in a file — no other information is kept. To create a lightweight tag, don’t supply the `-a`, `-s`, or `-m` option:
+
+	$ git tag v1.4-lw
+	$ git tag
+	v0.1
+	v1.3
+	v1.4
+	v1.4-lw
+	v1.5
+
+This time, if you run `git show` on the tag, you don’t see the extra tag information. The command just shows the commit:
+
+	$ git show v1.4-lw
+	commit 15027957951b64cf874c3557a0f3547bd83b3ff6
+	Merge: 4a447f7... a6b4c97...
+	Author: Scott Chacon <schacon@gee-mail.com>
+	Date:   Sun Feb 8 19:02:46 2009 -0800
+
+	    Merge branch 'experiment'
+
+### Verifying Tags ###
+
+To verify a signed tag, you use `git tag -v [tag-name]`. This command uses GPG to verify the signature. You need the signer’s public key in your keyring for this to work properly:
+
+	$ git tag -v v1.4.2.1
+	object 883653babd8ee7ea23e6a5c392bb739348b1eb61
+	type commit
+	tag v1.4.2.1
+	tagger Junio C Hamano <junkio@cox.net> 1158138501 -0700
+
+	GIT 1.4.2.1
+
+	Minor fixes since 1.4.2, including git-mv and git-http with alternates.
+	gpg: Signature made Wed Sep 13 02:08:25 2006 PDT using DSA key ID F3119B9A
+	gpg: Good signature from "Junio C Hamano <junkio@cox.net>"
+	gpg:                 aka "[jpeg image of size 1513]"
+	Primary key fingerprint: 3565 2A26 2040 E066 C9A7  4A7D C0C6 D9A4 F311 9B9A
+
+If you don’t have the signer’s public key, you get something like this instead:
+
+	gpg: Signature made Wed Sep 13 02:08:25 2006 PDT using DSA key ID F3119B9A
+	gpg: Can't check signature: public key not found
+	error: could not verify the tag 'v1.4.2.1'
+
+### Tagging Later ###
+
+You can also tag commits after you’ve moved past them. Suppose your commit history looks like this:
+
+	$ git log --pretty=oneline
+	15027957951b64cf874c3557a0f3547bd83b3ff6 Merge branch 'experiment'
+	a6b4c97498bd301d84096da251c98a07c7723e65 beginning write support
+	0d52aaab4479697da7686c15f77a3d64d9165190 one more thing
+	6d52a271eda8725415634dd79daabbc4d9b6008e Merge branch 'experiment'
+	0b7434d86859cc7b8c3d5e1dddfed66ff742fcbc added a commit function
+	4682c3261057305bdd616e23b64b0857d832627b added a todo file
+	166ae0c4d3f420721acbb115cc33848dfcc2121a started write support
+	9fceb02d0ae598e95dc970b74767f19372d61af8 updated rakefile
+	964f16d36dfccde844893cac5b347e7b3d44abbc commit the todo
+	8a5cbc430f1a9c3d00faaeffd07798508422908a updated readme
+
+Now, suppose you forgot to tag the project at v1.2, which was at the "updated rakefile" commit. You can add it after the fact. To tag that commit, you specify the commit checksum (or part of it) at the end of the command:
+
+	$ git tag -a v1.2 9fceb02
+
+You can see that you’ve tagged the commit:
+
+	$ git tag 
+	v0.1
+	v1.2
+	v1.3
+	v1.4
+	v1.4-lw
+	v1.5
+
+	$ git show v1.2
+	tag v1.2
+	Tagger: Scott Chacon <schacon@gee-mail.com>
+	Date:   Mon Feb 9 15:32:16 2009 -0800
+
+	version 1.2
+	commit 9fceb02d0ae598e95dc970b74767f19372d61af8
+	Author: Magnus Chacon <mchacon@gee-mail.com>
+	Date:   Sun Apr 27 20:43:35 2008 -0700
+
+	    updated rakefile
+	...
+
+### Sharing Tags ###
+
+By default, the `git push` command doesn’t transfer tags to remote servers. You will have to explicitly push tags to a shared server after you have created them.  This process is just like sharing remote branches – you can run `git push origin [tagname]`.
+
+	$ git push origin v1.5
+	Counting objects: 50, done.
+	Compressing objects: 100% (38/38), done.
+	Writing objects: 100% (44/44), 4.56 KiB, done.
+	Total 44 (delta 18), reused 8 (delta 1)
+	To git@github.com:schacon/simplegit.git
+	* [new tag]         v1.5 -> v1.5
+
+If you have a lot of tags that you want to push up at once, you can also use the `--tags` option to the `git push` command.  This will transfer all of your tags to the remote server that are not already there.
+
+	$ git push origin --tags
+	Counting objects: 50, done.
+	Compressing objects: 100% (38/38), done.
+	Writing objects: 100% (44/44), 4.56 KiB, done.
+	Total 44 (delta 18), reused 8 (delta 1)
+	To git@github.com:schacon/simplegit.git
+	 * [new tag]         v0.1 -> v0.1
+	 * [new tag]         v1.2 -> v1.2
+	 * [new tag]         v1.4 -> v1.4
+	 * [new tag]         v1.4-lw -> v1.4-lw
+	 * [new tag]         v1.5 -> v1.5
+
+Now, when someone else clones or pulls from your repository, they will get all your tags as well.
+
+## Tips and Tricks ##
+
+Before we finish this chapter on basic Git, a few little tips and tricks may make your Git experience a bit simpler, easier, or more familiar. Many people use Git without using any of these tips, and we won’t refer to them or assume you’ve used them later in the book; but you should probably know how to do them.
+
+### Auto-Completion ###
+
+If you use the Bash shell, Git comes with a nice auto-completion script you can enable. Download the Git source code, and look in the `contrib/completion` directory; there should be a file called `git-completion.bash`. Copy this file to your home directory, and add this to your `.bashrc` file:
+
+	source ~/.git-completion.bash
+
+If you want to set up Git to automatically have Bash shell completion for all users, copy this script to the `/opt/local/etc/bash_completion.d` directory on Mac systems or to the `/etc/bash_completion.d/` directory on Linux systems. This is a directory of scripts that Bash will automatically load to provide shell completions.
+
+If you’re using Windows with Git Bash, which is the default when installing Git on Windows with msysGit, auto-completion should be preconfigured.
+
+Press the Tab key when you’re writing a Git command, and it should return a set of suggestions for you to pick from:
+
+	$ git co<tab><tab>
+	commit config
+
+In this case, typing git co and then pressing the Tab key twice suggests commit and config. Adding `m<tab>` completes `git commit` automatically.
+	
+This also works with options, which is probably more useful. For instance, if you’re running a `git log` command and can’t remember one of the options, you can start typing it and press Tab to see what matches:
+
+	$ git log --s<tab>
+	--shortstat  --since=  --src-prefix=  --stat   --summary
+
+That’s a pretty nice trick and may save you some time and documentation reading.
+
+### Git Aliases ###
+
+Git doesn’t infer your command if you type it in partially. If you don’t want to type the entire text of each of the Git commands, you can easily set up an alias for each command using `git config`. Here are a couple of examples you may want to set up:
+
+	$ git config --global alias.co checkout
+	$ git config --global alias.br branch
+	$ git config --global alias.ci commit
+	$ git config --global alias.st status
+
+This means that, for example, instead of typing `git commit`, you just need to type `git ci`. As you go on using Git, you’ll probably use other commands frequently as well; in this case, don’t hesitate to create new aliases.
+
+This technique can also be very useful in creating commands that you think should exist. For example, to correct the usability problem you encountered with unstaging a file, you can add your own unstage alias to Git:
+
+	$ git config --global alias.unstage 'reset HEAD --'
+
+This makes the following two commands equivalent:
+
+	$ git unstage fileA
+	$ git reset HEAD fileA
+
+This seems a bit clearer. It’s also common to add a `last` command, like this:
+
+	$ git config --global alias.last 'log -1 HEAD'
+
+This way, you can see the last commit easily:
+	
+	$ git last
+	commit 66938dae3329c7aebe598c2246a8e6af90d04646
+	Author: Josh Goebel <dreamer3@example.com>
+	Date:   Tue Aug 26 19:48:51 2008 +0800
+
+	    test for current head
+
+	    Signed-off-by: Scott Chacon <schacon@example.com>
+
+As you can tell, Git simply replaces the new command with whatever you alias it for. However, maybe you want to run an external command, rather than a Git subcommand. In that case, you start the command with a `!` character. This is useful if you write your own tools that work with a Git repository. We can demonstrate by aliasing `git visual` to run `gitk`:
+
+	$ git config --global alias.visual '!gitk'
+
+## Summary ##
+
+At this point, you can do all the basic local Git operations — creating or cloning a repository, making changes, staging and committing those changes, and viewing the history of all the changes the repository has been through. Next, we’ll cover Git’s killer feature: its branching model.