cmis_server 1.0.3

data/lib/cmis_server/type_registry.rb

@@ -0,0 +1,115 @@
+module CmisServer
+  class TypeRegistry
+    class << self
+      def register_type(id, type)
+        types[id] = type
+      end
+
+      def get_type(id)
+        types[id]
+      end
+
+      def types
+        @types ||= Hash.new
+      end
+
+      # CMIS 1.1: Création dynamique de type
+      def create_type(type_definition)
+        # Validation du parent type
+        parent_id = type_definition[:parent_id]
+        parent_type = get_type(parent_id)
+        
+        unless parent_type
+          raise CmisServer::InvalidTypeDefinition.new("Parent type '#{parent_id}' does not exist")
+        end
+        
+        # Vérification que l'ID n'existe pas déjà
+        type_id = type_definition[:id]
+        if get_type(type_id)
+          raise CmisServer::InvalidTypeDefinition.new("Type '#{type_id}' already exists")
+        end
+        
+        # Création du type avec le parent approprié
+        type_attributes = type_definition.merge(parent_type: parent_type)
+        type = create_type_instance(type_attributes)
+        
+        # Enregistrement du type
+        register_type(type_id, type)
+        
+        type
+      end
+      
+      # CMIS 1.1: Mise à jour d'un type existant
+      def update_type(type_definition)
+        type_id = type_definition[:id]
+        existing_type = get_type(type_id)
+        
+        unless existing_type
+          raise CmisServer::InvalidTypeDefinition.new("Type '#{type_id}' does not exist")
+        end
+        
+        # Nous ne permettons pas de changer le parent d'un type
+        if type_definition[:parent_id] && type_definition[:parent_id] != existing_type.parent_id
+          raise CmisServer::InvalidTypeDefinition.new("Cannot change parent type")
+        end
+        
+        # Créer un nouveau type avec les propriétés mises à jour
+        updated_attributes = type_definition.merge(parent_type: existing_type.parent_type)
+        updated_type = create_type_instance(updated_attributes)
+        
+        # Remplacer l'ancien type
+        register_type(type_id, updated_type)
+        
+        updated_type
+      end
+      
+      # CMIS 1.1: Suppression d'un type
+      def delete_type(type_id)
+        type = get_type(type_id)
+        
+        unless type
+          raise CmisServer::InvalidTypeDefinition.new("Type '#{type_id}' does not exist")
+        end
+        
+        # Vérifier si le type a des enfants
+        has_children = types.values.any? { |t| t.parent_id == type_id }
+        if has_children
+          raise CmisServer::InvalidOperation.new("Cannot delete type with children")
+        end
+        
+        # Vérifier si le type est utilisé par des objets
+        if type_has_instances?(type_id)
+          raise CmisServer::InvalidOperation.new("Cannot delete type with instances")
+        end
+        
+        # Suppression du type
+        types.delete(type_id)
+        
+        true
+      end
+      
+      private
+      
+      def create_type_instance(attributes)
+        case attributes[:base_id]
+        when 'cmis:document'
+          CmisServer::DocumentType.new(attributes)
+        when 'cmis:folder'
+          CmisServer::FolderType.new(attributes)
+        when 'cmis:item'
+          CmisServer::ItemType.new(attributes)
+        when 'cmis:secondary'
+          CmisServer::SecondaryType.new(attributes)
+        else
+          CmisServer::Type.new(attributes)
+        end
+      end
+      
+      def type_has_instances?(type_id)
+        # À implémenter selon la façon dont vous stockez les objets CMIS
+        # Retourne true si le type est utilisé par au moins un objet
+        false
+      end
+    end
+  end
+end

data/lib/cmis_server/version.rb

@@ -0,0 +1,4 @@
+module CmisServer
+  VERSION = "1.0.3"
+  CMIS_VERSION_SUPPORTED = '1.1'
+end

data/lib/cmis_server.rb

@@ -0,0 +1,22 @@
+require "cmis_server/engine"
+
+module CmisServer
+
+  class << self
+    attr_writer :configuration
+  end
+
+  def self.configuration
+    @configuration ||= Configuration.new
+  end
+
+  def self.reset
+    @configuration = Configuration.new
+  end
+
+  def self.configure
+    yield(configuration)
+  end
+
+
+end

data/lib/tasks/cmis_server_tasks.rake

@@ -0,0 +1,4 @@
+# desc "Explaining what the task does"
+# task :cmis_server do
+#   # Task goes here
+# end

data/test/cmis_server_test.rb

@@ -0,0 +1,7 @@
+require 'test_helper'
+
+class CmisServerTest < ActiveSupport::TestCase
+  test "truth" do
+    assert_kind_of Module, CmisServer
+  end
+end

data/test/dummy/README.rdoc

@@ -0,0 +1,28 @@
+== README
+
+This README would normally document whatever steps are necessary to get the
+application up and running.
+
+Things you may want to cover:
+
+* Ruby version
+
+* System dependencies
+
+* Configuration
+
+* Database creation
+
+* Database initialization
+
+* How to run the test suite
+
+* Services (job queues, cache servers, search engines, etc.)
+
+* Deployment instructions
+
+* ...
+
+
+Please feel free to use a different markup language if you do not plan to run
+<tt>rake doc:app</tt>.

data/test/dummy/Rakefile

@@ -0,0 +1,6 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require File.expand_path('../config/application', __FILE__)
+
+Rails.application.load_tasks

data/test/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,13 @@
+// This is a manifest file that'll be compiled into application.js, which will include all the files
+// listed below.
+//
+// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
+// or any plugin's vendor/assets/javascripts directory can be referenced here using a relative path.
+//
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// compiled file.
+//
+// Read Sprockets README (https://github.com/rails/sprockets#sprockets-directives) for details
+// about supported directives.
+//
+//= require_tree .

data/test/dummy/app/assets/stylesheets/application.css

@@ -0,0 +1,15 @@
+/*
+ * This is a manifest file that'll be compiled into application.css, which will include all the files
+ * listed below.
+ *
+ * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
+ * or any plugin's vendor/assets/stylesheets directory can be referenced here using a relative path.
+ *
+ * You're free to add application-wide styles to this file and they'll appear at the bottom of the
+ * compiled file so the styles you add here take precedence over styles defined in any styles
+ * defined in the other CSS/SCSS files in this directory. It is generally better to create a new
+ * file per style scope.
+ *
+ *= require_tree .
+ *= require_self
+ */

data/test/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,5 @@
+class ApplicationController < ActionController::Base
+  # Prevent CSRF attacks by raising an exception.
+  # For APIs, you may want to use :null_session instead.
+  protect_from_forgery with: :exception
+end

data/test/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/test/dummy/app/views/layouts/application.html.erb

@@ -0,0 +1,14 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Dummy</title>
+  <%= stylesheet_link_tag    'application', media: 'all', 'data-turbolinks-track' => true %>
+  <%= javascript_include_tag 'application', 'data-turbolinks-track' => true %>
+  <%= csrf_meta_tags %>
+</head>
+<body>
+
+<%= yield %>
+
+</body>
+</html>

data/test/dummy/bin/bundle

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+load Gem.bin_path('bundler', 'bundle')

data/test/dummy/bin/rails

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+APP_PATH = File.expand_path('../../config/application', __FILE__)
+require_relative '../config/boot'
+require 'rails/commands'

data/test/dummy/bin/rake

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

data/test/dummy/bin/setup

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+require 'pathname'
+
+# path to your application root.
+APP_ROOT = Pathname.new File.expand_path('../../',  __FILE__)
+
+Dir.chdir APP_ROOT do
+  # This script is a starting point to setup your application.
+  # Add necessary setup steps to this file:
+
+  puts "== Installing dependencies =="
+  system "gem install bundler --conservative"
+  system "bundle check || bundle install"
+
+  # puts "\n== Copying sample files =="
+  # unless File.exist?("config/database.yml")
+  #   system "cp config/database.yml.sample config/database.yml"
+  # end
+
+  puts "\n== Preparing database =="
+  system "bin/rake db:setup"
+
+  puts "\n== Removing old logs and tempfiles =="
+  system "rm -f log/*"
+  system "rm -rf tmp/cache"
+
+  puts "\n== Restarting application server =="
+  system "touch tmp/restart.txt"
+end

data/test/dummy/config/application.rb

@@ -0,0 +1,26 @@
+require File.expand_path('../boot', __FILE__)
+
+require 'rails/all'
+
+Bundler.require(*Rails.groups)
+require "cmis_server"
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+
+    # Do not swallow errors in after_commit/after_rollback callbacks.
+    config.active_record.raise_in_transactional_callbacks = true
+  end
+end
+

data/test/dummy/config/boot.rb

@@ -0,0 +1,5 @@
+# Set up gems listed in the Gemfile.
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
+
+require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
+$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/test/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+default: &default
+  adapter: sqlite3
+  pool: 5
+  timeout: 5000
+
+development:
+  <<: *default
+  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: db/test.sqlite3
+
+production:
+  <<: *default
+  database: db/production.sqlite3

data/test/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/test/dummy/config/environments/development.rb

@@ -0,0 +1,41 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/test/dummy/config/environments/production.rb

@@ -0,0 +1,79 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like
+  # NGINX, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/test/dummy/config/environments/test.rb

@@ -0,0 +1,42 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static file server for tests with Cache-Control for performance.
+  config.serve_static_files   = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Randomize the order test cases are executed.
+  config.active_support.test_order = :random
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/test/dummy/config/initializers/assets.rb

@@ -0,0 +1,11 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/test/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/test/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/test/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/test/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/test/dummy/config/initializers/to_time_preserves_timezone.rb

@@ -0,0 +1,10 @@
+# Be sure to restart your server when you modify this file.
+
+# Preserve the timezone of the receiver when calling to `to_time`.
+# Ruby 2.4 will change the behavior of `to_time` to preserve the timezone
+# when converting to an instance of `Time` instead of the previous behavior
+# of converting to the local system timezone.
+#
+# Rails 5.0 introduced this config option so that apps made with earlier
+# versions of Rails are not affected when upgrading.
+ActiveSupport.to_time_preserves_timezone = true

data/test/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/test/dummy/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/test/dummy/config/routes.rb

@@ -0,0 +1,4 @@
+Rails.application.routes.draw do
+
+  mount CmisServer::Engine => "/cmis_server"
+end