classicCMS 0.1.2

data/vendor/bundle/gems/haml-3.1.4/vendor/sass/lib/sass/script/functions.rb

@@ -0,0 +1,1386 @@
+module Sass::Script
+  # Methods in this module are accessible from the SassScript context.
+  # For example, you can write
+  #
+  #     $color = hsl(120deg, 100%, 50%)
+  #
+  # and it will call {Sass::Script::Functions#hsl}.
+  #
+  # The following functions are provided:
+  #
+  # *Note: These functions are described in more detail below.*
+  #
+  # ## RGB Functions
+  #
+  # \{#rgb rgb($red, $green, $blue)}
+  # : Converts an `rgb(red, green, blue)` triplet into a color.
+  #
+  # \{#rgba rgba($red, $green, $blue, $alpha)}
+  # : Converts an `rgba(red, green, blue, alpha)` quadruplet into a color.
+  #
+  # \{#rgba rgba($color, $alpha)}
+  # : Adds an alpha layer to any color value.
+  #
+  # \{#red red($color)}
+  # : Gets the red component of a color.
+  #
+  # \{#green green($color)}
+  # : Gets the green component of a color.
+  #
+  # \{#blue blue($color)}
+  # : Gets the blue component of a color.
+  #
+  # \{#mix mix($color-1, $color-2, \[$weight\])}
+  # : Mixes two colors together.
+  #
+  # ## HSL Functions
+  #
+  # \{#hsl hsl($hue, $saturation, $lightness)}
+  # : Converts an `hsl(hue, saturation, lightness)` triplet into a color.
+  #
+  # \{#hsla hsla($hue, $saturation, $lightness, $alpha)}
+  # : Converts an `hsla(hue, saturation, lightness, alpha)` quadruplet into a color.
+  #
+  # \{#hue hue($color)}
+  # : Gets the hue component of a color.
+  #
+  # \{#saturation saturation($color)}
+  # : Gets the saturation component of a color.
+  #
+  # \{#lightness lightness($color)}
+  # : Gets the lightness component of a color.
+  #
+  # \{#adjust_hue adjust-hue($color, $degrees)}
+  # : Changes the hue of a color.
+  #
+  # \{#lighten lighten($color, $amount)}
+  # : Makes a color lighter.
+  #
+  # \{#darken darken($color, $amount)}
+  # : Makes a color darker.
+  #
+  # \{#saturate saturate($color, $amount)}
+  # : Makes a color more saturated.
+  #
+  # \{#desaturate desaturate($color, $amount)}
+  # : Makes a color less saturated.
+  #
+  # \{#grayscale grayscale($color)}
+  # : Converts a color to grayscale.
+  #
+  # \{#complement complement($color)}
+  # : Returns the complement of a color.
+  #
+  # \{#invert invert($color)}
+  # : Returns the inverse of a color.
+  #
+  # ## Opacity Functions
+  #
+  # \{#alpha alpha($color)} / \{#opacity opacity($color)}
+  # : Gets the alpha component (opacity) of a color.
+  #
+  # \{#rgba rgba($color, $alpha)}
+  # : Add or change an alpha layer for any color value.
+  #
+  # \{#opacify opacify($color, $amount)} / \{#fade_in fade-in($color, $amount)}
+  # : Makes a color more opaque.
+  #
+  # \{#transparentize transparentize($color, $amount)} / \{#fade_out fade-out($color, $amount)}
+  # : Makes a color more transparent.
+  #
+  # ## Other Color Functions
+  #
+  # \{#adjust_color adjust-color($color, \[$red\], \[$green\], \[$blue\], \[$hue\], \[$saturation\], \[$lightness\], \[$alpha\]}
+  # : Increase or decrease any of the components of a color.
+  #
+  # \{#scale_color scale-color($color, \[$red\], \[$green\], \[$blue\], \[$saturation\], \[$lightness\], \[$alpha\]}
+  # : Fluidly scale one or more components of a color.
+  #
+  # \{#change_color change-color($color, \[$red\], \[$green\], \[$blue\], \[$hue\], \[$saturation\], \[$lightness\], \[$alpha\]}
+  # : Changes one or more properties of a color.
+  #
+  # ## String Functions
+  #
+  # \{#unquote unquote($string)}
+  # : Removes the quotes from a string.
+  #
+  # \{#quote quote($string)}
+  # : Adds quotes to a string.
+  #
+  # ## Number Functions
+  #
+  # \{#percentage percentage($value)}
+  # : Converts a unitless number to a percentage.
+  #
+  # \{#round round($value)}
+  # : Rounds a number to the nearest whole number.
+  #
+  # \{#ceil ceil($value)}
+  # : Rounds a number up to the nearest whole number.
+  #
+  # \{#floor floor($value)}
+  # : Rounds a number down to the nearest whole number.
+  #
+  # \{#abs abs($value)}
+  # : Returns the absolute value of a number.
+  #
+  # ## List Functions {#list-functions}
+  #
+  # \{#length length($list)}
+  # : Returns the length of a list.
+  #
+  # \{#nth nth($list, $n)}
+  # : Returns a specific item in a list.
+  #
+  # \{#join join($list1, $list2, \[$separator\])}
+  # : Joins together two lists into one.
+  #
+  # ## Introspection Functions
+  #
+  # \{#type_of type-of($value)}
+  # : Returns the type of a value.
+  #
+  # \{#unit unit($number)}
+  # : Returns the units associated with a number.
+  #
+  # \{#unitless unitless($number)}
+  # : Returns whether a number has units or not.
+  #
+  # \{#comparable comparable($number-1, $number-2)}
+  # : Returns whether two numbers can be added or compared.
+  #
+  # ## Miscellaneous Functions
+  #
+  # \{#if if($condition, $if-true, $if-false)}
+  # : Returns one of two values, depending on whether or not a condition is true.
+  #
+  # ## Adding Custom Functions
+  #
+  # New Sass functions can be added by adding Ruby methods to this module.
+  # For example:
+  #
+  #     module Sass::Script::Functions
+  #       def reverse(string)
+  #         assert_type string, :String
+  #         Sass::Script::String.new(string.value.reverse)
+  #       end
+  #       declare :reverse, :args => [:string]
+  #     end
+  #
+  # Calling {declare} tells Sass the argument names for your function.
+  # If omitted, the function will still work, but will not be able to accept keyword arguments.
+  # {declare} can also allow your function to take arbitrary keyword arguments.
+  #
+  # There are a few things to keep in mind when modifying this module.
+  # First of all, the arguments passed are {Sass::Script::Literal} objects.
+  # Literal objects are also expected to be returned.
+  # This means that Ruby values must be unwrapped and wrapped.
+  #
+  # Most Literal objects support the {Sass::Script::Literal#value value} accessor
+  # for getting their Ruby values.
+  # Color objects, though, must be accessed using {Sass::Script::Color#rgb rgb},
+  # {Sass::Script::Color#red red}, {Sass::Script::Color#blue green}, or {Sass::Script::Color#blue blue}.
+  #
+  # Second, making Ruby functions accessible from Sass introduces the temptation
+  # to do things like database access within stylesheets.
+  # This is generally a bad idea;
+  # since Sass files are by default only compiled once,
+  # dynamic code is not a great fit.
+  #
+  # If you really, really need to compile Sass on each request,
+  # first make sure you have adequate caching set up.
+  # Then you can use {Sass::Engine} to render the code,
+  # using the {file:SASS_REFERENCE.md#custom-option `options` parameter}
+  # to pass in data that {EvaluationContext#options can be accessed}
+  # from your Sass functions.
+  #
+  # Within one of the functions in this module,
+  # methods of {EvaluationContext} can be used.
+  #
+  # ### Caveats
+  #
+  # When creating new {Literal} objects within functions,
+  # be aware that it's not safe to call {Literal#to_s #to_s}
+  # (or other methods that use the string representation)
+  # on those objects without first setting {Node#options= the #options attribute}.
+  module Functions
+    @signatures = {}
+
+    # A class representing a Sass function signature.
+    #
+    # @attr args [Array<Symbol>] The names of the arguments to the function.
+    # @attr var_args [Boolean] Whether the function takes a variable number of arguments.
+    # @attr var_kwargs [Boolean] Whether the function takes an arbitrary set of keyword arguments.
+    Signature = Struct.new(:args, :var_args, :var_kwargs)
+
+    # Declare a Sass signature for a Ruby-defined function.
+    # This includes the names of the arguments,
+    # whether the function takes a variable number of arguments,
+    # and whether the function takes an arbitrary set of keyword arguments.
+    #
+    # It's not necessary to declare a signature for a function.
+    # However, without a signature it won't support keyword arguments.
+    #
+    # A single function can have multiple signatures declared
+    # as long as each one takes a different number of arguments.
+    # It's also possible to declare multiple signatures
+    # that all take the same number of arguments,
+    # but none of them but the first will be used
+    # unless the user uses keyword arguments.
+    #
+    # @param method_name [Symbol] The name of the method
+    #   whose signature is being declared.
+    # @param args [Array<Symbol>] The names of the arguments for the function signature.
+    # @option options :var_args [Boolean] (false)
+    #   Whether the function accepts a variable number of (unnamed) arguments
+    #   in addition to the named arguments.
+    # @option options :var_kwargs [Boolean] (false)
+    #   Whether the function accepts other keyword arguments
+    #   in addition to those in `:args`.
+    #   If this is true, the Ruby function will be passed a hash from strings
+    #   to {Sass::Script::Literal}s as the last argument.
+    #   In addition, if this is true and `:var_args` is not,
+    #   Sass will ensure that the last argument passed is a hash.
+    # 
+    # @example
+    #   declare :rgba, [:hex, :alpha]
+    #   declare :rgba, [:red, :green, :blue, :alpha]
+    #   declare :accepts_anything, [], :var_args => true, :var_kwargs => true
+    #   declare :some_func, [:foo, :bar, :baz], :var_kwargs => true
+    def self.declare(method_name, args, options = {})
+      @signatures[method_name] ||= []
+      @signatures[method_name] << Signature.new(
+        args.map {|s| s.to_s},
+        options[:var_args],
+        options[:var_kwargs])
+    end
+
+    # Determine the correct signature for the number of arguments
+    # passed in for a given function.
+    # If no signatures match, the first signature is returned for error messaging.
+    #
+    # @param method_name [Symbol] The name of the Ruby function to be called.
+    # @param arg_arity [Number] The number of unnamed arguments the function was passed.
+    # @param kwarg_arity [Number] The number of keyword arguments the function was passed.
+    #
+    # @return [{Symbol => Object}, nil]
+    #   The signature options for the matching signature,
+    #   or nil if no signatures are declared for this function. See {declare}.
+    def self.signature(method_name, arg_arity, kwarg_arity)
+      return unless @signatures[method_name]
+      @signatures[method_name].each do |signature|
+        return signature if signature.args.size == arg_arity + kwarg_arity
+        next unless signature.args.size < arg_arity + kwarg_arity
+
+        # We have enough args.
+        # Now we need to figure out which args are varargs
+        # and if the signature allows them.
+        t_arg_arity, t_kwarg_arity = arg_arity, kwarg_arity
+        if signature.args.size > t_arg_arity
+          # we transfer some kwargs arity to args arity
+          # if it does not have enough args -- assuming the names will work out.
+          t_kwarg_arity -= (signature.args.size - t_arg_arity)
+          t_arg_arity = signature.args.size
+        end
+
+        if (  t_arg_arity == signature.args.size ||   t_arg_arity > signature.args.size && signature.var_args  ) &&
+           (t_kwarg_arity == 0                   || t_kwarg_arity > 0                   && signature.var_kwargs)
+          return signature
+        end
+      end
+      @signatures[method_name].first
+    end
+
+    # The context in which methods in {Script::Functions} are evaluated.
+    # That means that all instance methods of {EvaluationContext}
+    # are available to use in functions.
+    class EvaluationContext
+      include Functions
+
+      # The options hash for the {Sass::Engine} that is processing the function call
+      #
+      # @return [{Symbol => Object}]
+      attr_reader :options
+
+      # @param options [{Symbol => Object}] See \{#options}
+      def initialize(options)
+        @options = options
+      end
+
+      # Asserts that the type of a given SassScript value
+      # is the expected type (designated by a symbol).
+      #
+      # Valid types are `:Bool`, `:Color`, `:Number`, and `:String`.
+      # Note that `:String` will match both double-quoted strings
+      # and unquoted identifiers.
+      #
+      # @example
+      #   assert_type value, :String
+      #   assert_type value, :Number
+      # @param value [Sass::Script::Literal] A SassScript value
+      # @param type [Symbol] The name of the type the value is expected to be
+      # @param name [String, nil] The name of the argument.
+      def assert_type(value, type, name = nil)
+        return if value.is_a?(Sass::Script.const_get(type))
+        err = "#{value.inspect} is not a #{type.to_s.downcase}"
+        err = "$#{name}: " + err if name
+        raise ArgumentError.new(err)
+      end
+    end
+
+    class << self
+      # Returns whether user function with a given name exists.
+      #
+      # @param function_name [String]
+      # @return [Boolean]
+      alias_method :callable?, :public_method_defined?
+
+      private
+      def include(*args)
+        r = super
+        # We have to re-include ourselves into EvaluationContext to work around
+        # an icky Ruby restriction.
+        EvaluationContext.send :include, self
+        r
+      end
+    end
+
+    # Creates a {Color} object from red, green, and blue values.
+    #
+    # @param red [Number]
+    #   A number between 0 and 255 inclusive,
+    #   or between 0% and 100% inclusive
+    # @param green [Number]
+    #   A number between 0 and 255 inclusive,
+    #   or between 0% and 100% inclusive
+    # @param blue [Number]
+    #   A number between 0 and 255 inclusive,
+    #   or between 0% and 100% inclusive
+    # @see #rgba
+    # @return [Color]
+    def rgb(red, green, blue)
+      assert_type red, :Number
+      assert_type green, :Number
+      assert_type blue, :Number
+
+      Color.new([red, green, blue].map do |c|
+          v = c.value
+          if c.numerator_units == ["%"] && c.denominator_units.empty?
+            next v * 255 / 100.0 if (0..100).include?(v)
+            raise ArgumentError.new("Color value #{c} must be between 0% and 100% inclusive")
+          else
+            next v if (0..255).include?(v)
+            raise ArgumentError.new("Color value #{v} must be between 0 and 255 inclusive")
+          end
+        end)
+    end
+    declare :rgb, [:red, :green, :blue]
+
+    # @see #rgb
+    # @overload rgba(red, green, blue, alpha)
+    #   Creates a {Color} object from red, green, and blue values,
+    #   as well as an alpha channel indicating opacity.
+    #
+    #   @param red [Number]
+    #     A number between 0 and 255 inclusive
+    #   @param green [Number]
+    #     A number between 0 and 255 inclusive
+    #   @param blue [Number]
+    #     A number between 0 and 255 inclusive
+    #   @param alpha [Number]
+    #     A number between 0 and 1
+    #   @return [Color]
+    #
+    # @overload rgba(color, alpha)
+    #   Sets the opacity of a color.
+    #
+    #   @example
+    #     rgba(#102030, 0.5) => rgba(16, 32, 48, 0.5)
+    #     rgba(blue, 0.2)    => rgba(0, 0, 255, 0.2)
+    #
+    #   @param color [Color]
+    #   @param alpha [Number]
+    #     A number between 0 and 1
+    #   @return [Color]
+    def rgba(*args)
+      case args.size
+      when 2
+        color, alpha = args
+
+        assert_type color, :Color
+        assert_type alpha, :Number
+
+        unless (0..1).include?(alpha.value)
+          raise ArgumentError.new("Alpha channel #{alpha.value} must be between 0 and 1 inclusive")
+        end
+
+        color.with(:alpha => alpha.value)
+      when 4
+        red, green, blue, alpha = args
+        rgba(rgb(red, green, blue), alpha)
+      else
+        raise ArgumentError.new("wrong number of arguments (#{args.size} for 4)")
+      end
+    end
+    declare :rgba, [:red, :green, :blue, :alpha]
+    declare :rgba, [:color, :alpha]
+
+    # Creates a {Color} object from hue, saturation, and lightness.
+    # Uses the algorithm from the [CSS3 spec](http://www.w3.org/TR/css3-color/#hsl-color).
+    #
+    # @param hue [Number] The hue of the color.
+    #   Should be between 0 and 360 degrees, inclusive
+    # @param saturation [Number] The saturation of the color.
+    #   Must be between `0%` and `100%`, inclusive
+    # @param lightness [Number] The lightness of the color.
+    #   Must be between `0%` and `100%`, inclusive
+    # @return [Color] The resulting color
+    # @see #hsla
+    # @raise [ArgumentError] if `saturation` or `lightness` are out of bounds
+    def hsl(hue, saturation, lightness)
+      hsla(hue, saturation, lightness, Number.new(1))
+    end
+    declare :hsl, [:hue, :saturation, :lightness]
+
+    # Creates a {Color} object from hue, saturation, and lightness,
+    # as well as an alpha channel indicating opacity.
+    # Uses the algorithm from the [CSS3 spec](http://www.w3.org/TR/css3-color/#hsl-color).
+    #
+    # @param hue [Number] The hue of the color.
+    #   Should be between 0 and 360 degrees, inclusive
+    # @param saturation [Number] The saturation of the color.
+    #   Must be between `0%` and `100%`, inclusive
+    # @param lightness [Number] The lightness of the color.
+    #   Must be between `0%` and `100%`, inclusive
+    # @param alpha [Number] The opacity of the color.
+    #   Must be between 0 and 1, inclusive
+    # @return [Color] The resulting color
+    # @see #hsl
+    # @raise [ArgumentError] if `saturation`, `lightness`, or `alpha` are out of bounds
+    def hsla(hue, saturation, lightness, alpha)
+      assert_type hue, :Number
+      assert_type saturation, :Number
+      assert_type lightness, :Number
+      assert_type alpha, :Number
+
+      unless (0..1).include?(alpha.value)
+        raise ArgumentError.new("Alpha channel #{alpha.value} must be between 0 and 1")
+      end
+
+      original_s = saturation
+      original_l = lightness
+      # This algorithm is from http://www.w3.org/TR/css3-color#hsl-color
+      h, s, l = [hue, saturation, lightness].map { |a| a.value }
+      raise ArgumentError.new("Saturation #{s} must be between 0% and 100%") unless (0..100).include?(s)
+      raise ArgumentError.new("Lightness #{l} must be between 0% and 100%") unless (0..100).include?(l)
+
+      Color.new(:hue => h, :saturation => s, :lightness => l, :alpha => alpha.value)
+    end
+    declare :hsla, [:hue, :saturation, :lightness, :alpha]
+
+    # Returns the red component of a color.
+    #
+    # @param color [Color]
+    # @return [Number]
+    # @raise [ArgumentError] If `color` isn't a color
+    def red(color)
+      assert_type color, :Color
+      Sass::Script::Number.new(color.red)
+    end
+    declare :red, [:color]
+
+    # Returns the green component of a color.
+    #
+    # @param color [Color]
+    # @return [Number]
+    # @raise [ArgumentError] If `color` isn't a color
+    def green(color)
+      assert_type color, :Color
+      Sass::Script::Number.new(color.green)
+    end
+    declare :green, [:color]
+
+    # Returns the blue component of a color.
+    #
+    # @param color [Color]
+    # @return [Number]
+    # @raise [ArgumentError] If `color` isn't a color
+    def blue(color)
+      assert_type color, :Color
+      Sass::Script::Number.new(color.blue)
+    end
+    declare :blue, [:color]
+
+    # Returns the hue component of a color.
+    #
+    # See [the CSS3 HSL specification](http://en.wikipedia.org/wiki/HSL_and_HSV#Conversion_from_RGB_to_HSL_or_HSV).
+    #
+    # Calculated from RGB where necessary via [this algorithm](http://en.wikipedia.org/wiki/HSL_and_HSV#Conversion_from_RGB_to_HSL_or_HSV).
+    #
+    # @param color [Color]
+    # @return [Number] between 0deg and 360deg
+    # @see #adjust_hue
+    # @raise [ArgumentError] if `color` isn't a color
+    def hue(color)
+      assert_type color, :Color
+      Sass::Script::Number.new(color.hue, ["deg"])
+    end
+    declare :hue, [:color]
+
+    # Returns the saturation component of a color.
+    #
+    # See [the CSS3 HSL specification](http://en.wikipedia.org/wiki/HSL_and_HSV#Conversion_from_RGB_to_HSL_or_HSV).
+    #
+    # Calculated from RGB where necessary via [this algorithm](http://en.wikipedia.org/wiki/HSL_and_HSV#Conversion_from_RGB_to_HSL_or_HSV).
+    #
+    # @param color [Color]
+    # @return [Number] between 0% and 100%
+    # @see #saturate
+    # @see #desaturate
+    # @raise [ArgumentError] if `color` isn't a color
+    def saturation(color)
+      assert_type color, :Color
+      Sass::Script::Number.new(color.saturation, ["%"])
+    end
+    declare :saturation, [:color]
+
+    # Returns the hue component of a color.
+    #
+    # See [the CSS3 HSL specification](http://en.wikipedia.org/wiki/HSL_and_HSV#Conversion_from_RGB_to_HSL_or_HSV).
+    #
+    # Calculated from RGB where necessary via [this algorithm](http://en.wikipedia.org/wiki/HSL_and_HSV#Conversion_from_RGB_to_HSL_or_HSV).
+    #
+    # @param color [Color]
+    # @return [Number] between 0% and 100%
+    # @see #lighten
+    # @see #darken
+    # @raise [ArgumentError] if `color` isn't a color
+    def lightness(color)
+      assert_type color, :Color
+      Sass::Script::Number.new(color.lightness, ["%"])
+    end
+    declare :lightness, [:color]
+
+    # Returns the alpha component (opacity) of a color.
+    # This is 1 unless otherwise specified.
+    #
+    # This function also supports the proprietary Microsoft
+    # `alpha(opacity=20)` syntax.
+    #
+    # @overload def alpha(color)
+    # @param color [Color]
+    # @return [Number]
+    # @see #opacify
+    # @see #transparentize
+    # @raise [ArgumentError] If `color` isn't a color
+    def alpha(*args)
+      if args.all? do |a|
+          a.is_a?(Sass::Script::String) && a.type == :identifier &&
+            a.value =~ /^[a-zA-Z]+\s*=/
+        end
+        # Support the proprietary MS alpha() function
+        return Sass::Script::String.new("alpha(#{args.map {|a| a.to_s}.join(", ")})")
+      end
+
+      opacity(*args)
+    end
+    declare :alpha, [:color]
+
+    # Returns the alpha component (opacity) of a color.
+    # This is 1 unless otherwise specified.
+    #
+    # @param color [Color]
+    # @return [Number]
+    # @see #opacify
+    # @see #transparentize
+    # @raise [ArgumentError] If `color` isn't a color
+    def opacity(color)
+      assert_type color, :Color
+      Sass::Script::Number.new(color.alpha)
+    end
+    declare :opacity, [:color]
+
+    # Makes a color more opaque.
+    # Takes a color and an amount between 0 and 1,
+    # and returns a color with the opacity increased by that value.
+    #
+    # @example
+    #   opacify(rgba(0, 0, 0, 0.5), 0.1) => rgba(0, 0, 0, 0.6)
+    #   opacify(rgba(0, 0, 17, 0.8), 0.2) => #001
+    # @param color [Color]
+    # @param amount [Number]
+    # @return [Color]
+    # @see #transparentize
+    # @raise [ArgumentError] If `color` isn't a color,
+    #   or `number` isn't a number between 0 and 1
+    def opacify(color, amount)
+      _adjust(color, amount, :alpha, 0..1, :+)
+    end
+    declare :opacify, [:color, :amount]
+
+    alias_method :fade_in, :opacify
+    declare :fade_in, [:color, :amount]
+
+    # Makes a color more transparent.
+    # Takes a color and an amount between 0 and 1,
+    # and returns a color with the opacity decreased by that value.
+    #
+    # @example
+    #   transparentize(rgba(0, 0, 0, 0.5), 0.1) => rgba(0, 0, 0, 0.4)
+    #   transparentize(rgba(0, 0, 0, 0.8), 0.2) => rgba(0, 0, 0, 0.6)
+    # @param color [Color]
+    # @param amount [Number]
+    # @return [Color]
+    # @see #opacify
+    # @raise [ArgumentError] If `color` isn't a color,
+    #   or `number` isn't a number between 0 and 1
+    def transparentize(color, amount)
+      _adjust(color, amount, :alpha, 0..1, :-)
+    end
+    declare :transparentize, [:color, :amount]
+
+    alias_method :fade_out, :transparentize
+    declare :fade_out, [:color, :amount]
+
+    # Makes a color lighter.
+    # Takes a color and an amount between 0% and 100%,
+    # and returns a color with the lightness increased by that value.
+    #
+    # @example
+    #   lighten(hsl(0, 0%, 0%), 30%) => hsl(0, 0, 30)
+    #   lighten(#800, 20%) => #e00
+    # @param color [Color]
+    # @param amount [Number]
+    # @return [Color]
+    # @see #darken
+    # @raise [ArgumentError] If `color` isn't a color,
+    #   or `number` isn't a number between 0% and 100%
+    def lighten(color, amount)
+      _adjust(color, amount, :lightness, 0..100, :+, "%")
+    end
+    declare :lighten, [:color, :amount]
+
+    # Makes a color darker.
+    # Takes a color and an amount between 0% and 100%,
+    # and returns a color with the lightness decreased by that value.
+    #
+    # @example
+    #   darken(hsl(25, 100%, 80%), 30%) => hsl(25, 100%, 50%)
+    #   darken(#800, 20%) => #200
+    # @param color [Color]
+    # @param amount [Number]
+    # @return [Color]
+    # @see #lighten
+    # @raise [ArgumentError] If `color` isn't a color,
+    #   or `number` isn't a number between 0% and 100%
+    def darken(color, amount)
+      _adjust(color, amount, :lightness, 0..100, :-, "%")
+    end
+    declare :darken, [:color, :amount]
+
+    # Makes a color more saturated.
+    # Takes a color and an amount between 0% and 100%,
+    # and returns a color with the saturation increased by that value.
+    #
+    # @example
+    #   saturate(hsl(120, 30%, 90%), 20%) => hsl(120, 50%, 90%)
+    #   saturate(#855, 20%) => #9e3f3f
+    # @param color [Color]
+    # @param amount [Number]
+    # @return [Color]
+    # @see #desaturate
+    # @raise [ArgumentError] If `color` isn't a color,
+    #   or `number` isn't a number between 0% and 100%
+    def saturate(color, amount)
+      _adjust(color, amount, :saturation, 0..100, :+, "%")
+    end
+    declare :saturate, [:color, :amount]
+
+    # Makes a color less saturated.
+    # Takes a color and an amount between 0% and 100%,
+    # and returns a color with the saturation decreased by that value.
+    #
+    # @example
+    #   desaturate(hsl(120, 30%, 90%), 20%) => hsl(120, 10%, 90%)
+    #   desaturate(#855, 20%) => #726b6b
+    # @param color [Color]
+    # @param amount [Number]
+    # @return [Color]
+    # @see #saturate
+    # @raise [ArgumentError] If `color` isn't a color,
+    #   or `number` isn't a number between 0% and 100%
+    def desaturate(color, amount)
+      _adjust(color, amount, :saturation, 0..100, :-, "%")
+    end
+    declare :desaturate, [:color, :amount]
+
+    # Changes the hue of a color while retaining the lightness and saturation.
+    # Takes a color and a number of degrees (usually between -360deg and 360deg),
+    # and returns a color with the hue rotated by that value.
+    #
+    # @example
+    #   adjust-hue(hsl(120, 30%, 90%), 60deg) => hsl(180, 30%, 90%)
+    #   adjust-hue(hsl(120, 30%, 90%), 060deg) => hsl(60, 30%, 90%)
+    #   adjust-hue(#811, 45deg) => #886a11
+    # @param color [Color]
+    # @param amount [Number]
+    # @return [Color]
+    # @raise [ArgumentError] If `color` isn't a color, or `number` isn't a number
+    def adjust_hue(color, degrees)
+      assert_type color, :Color
+      assert_type degrees, :Number
+      color.with(:hue => color.hue + degrees.value)
+    end
+    declare :adjust_hue, [:color, :degrees]
+
+    # Adjusts one or more properties of a color.
+    # This can change the red, green, blue, hue, saturation, value, and alpha properties.
+    # The properties are specified as keyword arguments,
+    # and are added to or subtracted from the color's current value for that property.
+    #
+    # `$red`, `$green`, and `$blue` properties should be between 0 and 255.
+    # `$saturation` and `$lightness` should be between 0% and 100%.
+    # `$alpha` should be between 0 and 1.
+    #
+    # All properties are optional.
+    # You can't specify both RGB properties (`$red`, `$green`, `$blue`)
+    # and HSL properties (`$hue`, `$saturation`, `$value`) at the same time.
+    #
+    # @example
+    #   adjust-color(#102030, $blue: 5) => #102035
+    #   adjust-color(#102030, $red: -5, $blue: 5) => #0b2035
+    #   adjust-color(hsl(25, 100%, 80%), $lightness: -30%, $alpha: -0.4) => hsla(25, 100%, 50%, 0.6)
+    # @param color [Color]
+    # @param red [Number]
+    # @param green [Number]
+    # @param blue [Number]
+    # @param hue [Number]
+    # @param saturation [Number]
+    # @param lightness [Number]
+    # @param alpha [Number]
+    # @return [Color]
+    # @raise [ArgumentError] if `color` is not a color,
+    #   if any keyword argument is not a number,
+    #   if any keyword argument is not in the legal range,
+    #   if an unexpected keyword argument is given,
+    #   or if both HSL and RGB properties are given.
+    def adjust_color(color, kwargs)
+      assert_type color, :Color
+      with = Sass::Util.map_hash({
+          "red" => [-255..255, ""],
+          "green" => [-255..255, ""],
+          "blue" => [-255..255, ""],
+          "hue" => nil,
+          "saturation" => [-100..100, "%"],
+          "lightness" => [-100..100, "%"],
+          "alpha" => [-1..1, ""]
+        }) do |name, (range, units)|
+
+        next unless val = kwargs.delete(name)
+        assert_type val, :Number, name
+        if range && !range.include?(val.value)
+          raise ArgumentError.new("$#{name}: Amount #{val} must be between #{range.first}#{units} and #{range.last}#{units}")
+        end
+        adjusted = color.send(name) + val.value
+        adjusted = [0, Sass::Util.restrict(adjusted, range)].max if range
+        [name.to_sym, adjusted]
+      end
+
+      unless kwargs.empty?
+        name, val = kwargs.to_a.first
+        raise ArgumentError.new("Unknown argument $#{name} (#{val})")
+      end
+
+      color.with(with)
+    end
+    declare :adjust_color, [:color], :var_kwargs => true
+
+    # Scales one or more properties of a color by a percentage value.
+    # Unlike \{#adjust_color adjust-color}, which changes a color's properties by fixed amounts,
+    # \{#scale_color scale-color} fluidly changes them based on how high or low they already are.
+    # That means that lightening an already-light color with \{#scale_color scale-color}
+    # won't change the lightness much,
+    # but lightening a dark color by the same amount will change it more dramatically.
+    # This has the benefit of making `scale-color($color, ...)` have a similar effect
+    # regardless of what `$color` is.
+    #
+    # For example, the lightness of a color can be anywhere between 0 and 100.
+    # If `scale-color($color, $lightness: 40%)` is called, the resulting color's lightness
+    # will be 40% of the way between its original lightness and 100.
+    # If `scale-color($color, $lightness: -40%)` is called instead,
+    # the lightness will be 40% of the way between the original and 0.
+    #
+    # This can change the red, green, blue, saturation, value, and alpha properties.
+    # The properties are specified as keyword arguments.
+    # All arguments should be percentages between 0% and 100%.
+    #
+    # All properties are optional.
+    # You can't specify both RGB properties (`$red`, `$green`, `$blue`)
+    # and HSL properties (`$saturation`, `$value`) at the same time.
+    #
+    # @example
+    #   scale-color(hsl(120, 70, 80), $lightness: 50%) => hsl(120, 70, 90)
+    #   scale-color(rgb(200, 150, 170), $green: -40%, $blue: 70%) => rgb(200, 90, 229)
+    #   scale-color(hsl(200, 70, 80), $saturation: -90%, $alpha: -30%) => hsla(200, 7, 80, 0.7)
+    # @param color [Color]
+    # @param red [Number]
+    # @param green [Number]
+    # @param blue [Number]
+    # @param saturation [Number]
+    # @param lightness [Number]
+    # @param alpha [Number]
+    # @return [Color]
+    # @raise [ArgumentError] if `color` is not a color,
+    #   if any keyword argument is not a percentage between 0% and 100%,
+    #   if an unexpected keyword argument is given,
+    #   or if both HSL and RGB properties are given.
+    def scale_color(color, kwargs)
+      assert_type color, :Color
+      with = Sass::Util.map_hash({
+          "red" => 255,
+          "green" => 255,
+          "blue" => 255,
+          "saturation" => 100,
+          "lightness" => 100,
+          "alpha" => 1
+        }) do |name, max|
+
+        next unless val = kwargs.delete(name)
+        assert_type val, :Number, name
+        if !(val.numerator_units == ['%'] && val.denominator_units.empty?)
+          raise ArgumentError.new("$#{name}: Amount #{val} must be a % (e.g. #{val.value}%)")
+        elsif !(-100..100).include?(val.value)
+          raise ArgumentError.new("$#{name}: Amount #{val} must be between -100% and 100%")
+        end
+
+        current = color.send(name)
+        scale = val.value/100.0
+        diff = scale > 0 ? max - current : current
+        [name.to_sym, current + diff*scale]
+      end
+
+      unless kwargs.empty?
+        name, val = kwargs.to_a.first
+        raise ArgumentError.new("Unknown argument $#{name} (#{val})")
+      end
+
+      color.with(with)
+    end
+    declare :scale_color, [:color], :var_kwargs => true
+
+    # Changes one or more properties of a color.
+    # This can change the red, green, blue, hue, saturation, value, and alpha properties.
+    # The properties are specified as keyword arguments,
+    # and replace the color's current value for that property.
+    #
+    # `$red`, `$green`, and `$blue` properties should be between 0 and 255.
+    # `$saturation` and `$lightness` should be between 0% and 100%.
+    # `$alpha` should be between 0 and 1.
+    #
+    # All properties are optional.
+    # You can't specify both RGB properties (`$red`, `$green`, `$blue`)
+    # and HSL properties (`$hue`, `$saturation`, `$value`) at the same time.
+    #
+    # @example
+    #   change-color(#102030, $blue: 5) => #102005
+    #   change-color(#102030, $red: 120, $blue: 5) => #782005
+    #   change-color(hsl(25, 100%, 80%), $lightness: 40%, $alpha: 0.8) => hsla(25, 100%, 40%, 0.8)
+    # @param color [Color]
+    # @param red [Number]
+    # @param green [Number]
+    # @param blue [Number]
+    # @param hue [Number]
+    # @param saturation [Number]
+    # @param lightness [Number]
+    # @param alpha [Number]
+    # @return [Color]
+    # @raise [ArgumentError] if `color` is not a color,
+    #   if any keyword argument is not a number,
+    #   if any keyword argument is not in the legal range,
+    #   if an unexpected keyword argument is given,
+    #   or if both HSL and RGB properties are given.
+    def change_color(color, kwargs)
+      assert_type color, :Color
+      with = Sass::Util.map_hash(%w[red green blue hue saturation lightness alpha]) do |name, max|
+        next unless val = kwargs.delete(name)
+        assert_type val, :Number, name
+        [name.to_sym, val.value]
+      end
+
+      unless kwargs.empty?
+        name, val = kwargs.to_a.first
+        raise ArgumentError.new("Unknown argument $#{name} (#{val})")
+      end
+
+      color.with(with)
+    end
+    declare :change_color, [:color], :var_kwargs => true
+
+    # Mixes together two colors.
+    # Specifically, takes the average of each of the RGB components,
+    # optionally weighted by the given percentage.
+    # The opacity of the colors is also considered when weighting the components.
+    #
+    # The weight specifies the amount of the first color that should be included
+    # in the returned color.
+    # The default, 50%, means that half the first color
+    # and half the second color should be used.
+    # 25% means that a quarter of the first color
+    # and three quarters of the second color should be used.
+    #
+    # @example
+    #   mix(#f00, #00f) => #7f007f
+    #   mix(#f00, #00f, 25%) => #3f00bf
+    #   mix(rgba(255, 0, 0, 0.5), #00f) => rgba(63, 0, 191, 0.75)
+    # @overload mix(color1, color2, weight: 50%)
+    #   @param color1 [Color]
+    #   @param color2 [Color]
+    #   @param weight [Number] between 0% and 100%
+    #   @return [Color]
+    #   @raise [ArgumentError] if `color1` or `color2` aren't colors,
+    #     or `weight` isn't a number between 0% and 100%
+    def mix(color1, color2, weight = Number.new(50))
+      assert_type color1, :Color
+      assert_type color2, :Color
+      assert_type weight, :Number
+
+      unless (0..100).include?(weight.value)
+        raise ArgumentError.new("Weight #{weight} must be between 0% and 100%")
+      end
+
+      # This algorithm factors in both the user-provided weight
+      # and the difference between the alpha values of the two colors
+      # to decide how to perform the weighted average of the two RGB values.
+      #
+      # It works by first normalizing both parameters to be within [-1, 1],
+      # where 1 indicates "only use color1", -1 indicates "only use color 0",
+      # and all values in between indicated a proportionately weighted average.
+      #
+      # Once we have the normalized variables w and a,
+      # we apply the formula (w + a)/(1 + w*a)
+      # to get the combined weight (in [-1, 1]) of color1.
+      # This formula has two especially nice properties:
+      #
+      #   * When either w or a are -1 or 1, the combined weight is also that number
+      #     (cases where w * a == -1 are undefined, and handled as a special case).
+      #
+      #   * When a is 0, the combined weight is w, and vice versa
+      #
+      # Finally, the weight of color1 is renormalized to be within [0, 1]
+      # and the weight of color2 is given by 1 minus the weight of color1.
+      p = weight.value/100.0
+      w = p*2 - 1
+      a = color1.alpha - color2.alpha
+
+      w1 = (((w * a == -1) ? w : (w + a)/(1 + w*a)) + 1)/2.0
+      w2 = 1 - w1
+
+      rgb = color1.rgb.zip(color2.rgb).map {|v1, v2| v1*w1 + v2*w2}
+      alpha = color1.alpha*p + color2.alpha*(1-p)
+      Color.new(rgb + [alpha])
+    end
+    declare :mix, [:color_1, :color_2]
+    declare :mix, [:color_1, :color_2, :weight]
+
+    # Converts a color to grayscale.
+    # This is identical to `desaturate(color, 100%)`.
+    #
+    # @param color [Color]
+    # @return [Color]
+    # @raise [ArgumentError] if `color` isn't a color
+    # @see #desaturate
+    def grayscale(color)
+      desaturate color, Number.new(100)
+    end
+    declare :grayscale, [:color]
+
+    # Returns the complement of a color.
+    # This is identical to `adjust-hue(color, 180deg)`.
+    #
+    # @param color [Color]
+    # @return [Color]
+    # @raise [ArgumentError] if `color` isn't a color
+    # @see #adjust_hue #adjust-hue
+    def complement(color)
+      adjust_hue color, Number.new(180)
+    end
+    declare :complement, [:color]
+
+    # Returns the inverse (negative) of a color.
+    # The red, green, and blue values are inverted, while the opacity is left alone.
+    #
+    # @param color [Color]
+    # @return [Color]
+    # @raise [ArgumentError] if `color` isn't a color
+    def invert(color)
+      assert_type color, :Color
+      color.with(
+        :red => (255 - color.red),
+        :green => (255 - color.green),
+        :blue => (255 - color.blue))
+    end
+
+    # Removes quotes from a string if the string is quoted,
+    # or returns the same string if it's not.
+    #
+    # @param string [String]
+    # @return [String]
+    # @raise [ArgumentError] if `string` isn't a string
+    # @see #quote
+    # @example
+    #   unquote("foo") => foo
+    #   unquote(foo) => foo
+    def unquote(string)
+      if string.is_a?(Sass::Script::String)
+        Sass::Script::String.new(string.value, :identifier)
+      else
+        string
+      end
+    end
+    declare :unquote, [:string]
+
+    # Add quotes to a string if the string isn't quoted,
+    # or returns the same string if it is.
+    #
+    # @param string [String]
+    # @return [String]
+    # @raise [ArgumentError] if `string` isn't a string
+    # @see #unquote
+    # @example
+    #   quote("foo") => "foo"
+    #   quote(foo) => "foo"
+    def quote(string)
+      assert_type string, :String
+      Sass::Script::String.new(string.value, :string)
+    end
+    declare :quote, [:string]
+
+    # Inspects the type of the argument, returning it as an unquoted string.
+    #
+    # @example
+    #   type-of(100px)  => number
+    #   type-of(asdf)   => string
+    #   type-of("asdf") => string
+    #   type-of(true)   => bool
+    #   type-of(#fff)   => color
+    #   type-of(blue)   => color
+    # @param value [Literal] The object to inspect
+    # @return [String] The unquoted string name of the literal's type
+    def type_of(value)
+      Sass::Script::String.new(value.class.name.gsub(/Sass::Script::/,'').downcase)
+    end
+    declare :type_of, [:value]
+
+    # Inspects the unit of the number, returning it as a quoted string.
+    # Complex units are sorted in alphabetical order by numerator and denominator.
+    #
+    # @example
+    #   unit(100) => ""
+    #   unit(100px) => "px"
+    #   unit(3em) => "em"
+    #   unit(10px * 5em) => "em*px"
+    #   unit(10px * 5em / 30cm / 1rem) => "em*px/cm*rem"
+    # @param number [Literal] The number to inspect
+    # @return [String] The unit(s) of the number
+    # @raise [ArgumentError] if `number` isn't a number
+    def unit(number)
+      assert_type number, :Number
+      Sass::Script::String.new(number.unit_str, :string)
+    end
+    declare :unit, [:number]
+
+    # Inspects the unit of the number, returning a boolean indicating if it is unitless.
+    #
+    # @example
+    #   unitless(100) => true
+    #   unitless(100px) => false
+    # @param number [Literal] The number to inspect
+    # @return [Bool] Whether or not the number is unitless
+    # @raise [ArgumentError] if `number` isn't a number
+    def unitless(number)
+      assert_type number, :Number
+      Sass::Script::Bool.new(number.unitless?)
+    end
+    declare :unitless, [:number]
+
+    # Returns true if two numbers are similar enough to be added, subtracted, or compared.
+    #
+    # @example
+    #   comparable(2px, 1px) => true
+    #   comparable(100px, 3em) => false
+    #   comparable(10cm, 3mm) => true
+    # @param number_1 [Number]
+    # @param number_2 [Number]
+    # @return [Bool] indicating if the numbers can be compared.
+    # @raise [ArgumentError] if `number_1` or `number_2` aren't numbers
+    def comparable(number_1, number_2)
+      assert_type number_1, :Number
+      assert_type number_2, :Number
+      Sass::Script::Bool.new(number_1.comparable_to?(number_2))
+    end
+    declare :comparable, [:number_1, :number_2]
+
+    # Converts a decimal number to a percentage.
+    #
+    # @example
+    #   percentage(100px / 50px) => 200%
+    # @param value [Number] The decimal number to convert to a percentage
+    # @return [Number] The percentage
+    # @raise [ArgumentError] If `value` isn't a unitless number
+    def percentage(value)
+      unless value.is_a?(Sass::Script::Number) && value.unitless?
+        raise ArgumentError.new("#{value.inspect} is not a unitless number")
+      end
+      Sass::Script::Number.new(value.value * 100, ['%'])
+    end
+    declare :percentage, [:value]
+
+    # Rounds a number to the nearest whole number.
+    #
+    # @example
+    #   round(10.4px) => 10px
+    #   round(10.6px) => 11px
+    # @param value [Number] The number
+    # @return [Number] The rounded number
+    # @raise [ArgumentError] if `value` isn't a number
+    def round(value)
+      numeric_transformation(value) {|n| n.round}
+    end
+    declare :round, [:value]
+
+    # Rounds a number up to the nearest whole number.
+    #
+    # @example
+    #   ciel(10.4px) => 11px
+    #   ciel(10.6px) => 11px
+    # @param value [Number] The number
+    # @return [Number] The rounded number
+    # @raise [ArgumentError] if `value` isn't a number
+    def ceil(value)
+      numeric_transformation(value) {|n| n.ceil}
+    end
+    declare :ceil, [:value]
+
+    # Rounds down to the nearest whole number.
+    #
+    # @example
+    #   floor(10.4px) => 10px
+    #   floor(10.6px) => 10px
+    # @param value [Number] The number
+    # @return [Number] The rounded number
+    # @raise [ArgumentError] if `value` isn't a number
+    def floor(value)
+      numeric_transformation(value) {|n| n.floor}
+    end
+    declare :floor, [:value]
+
+    # Finds the absolute value of a number.
+    #
+    # @example
+    #   abs(10px) => 10px
+    #   abs(-10px) => 10px
+    # @param value [Number] The number
+    # @return [Number] The absolute value
+    # @raise [ArgumentError] if `value` isn't a number
+    def abs(value)
+      numeric_transformation(value) {|n| n.abs}
+    end
+    declare :abs, [:value]
+
+    # Return the length of a list.
+    #
+    # @example
+    #   length(10px) => 1
+    #   length(10px 20px 30px) => 3
+    # @param list [Literal] The list
+    # @return [Number] The length
+    def length(list)
+      Sass::Script::Number.new(list.to_a.size)
+    end
+    declare :length, [:list]
+
+    # Gets the nth item in a list.
+    #
+    # Note that unlike some languages, the first item in a Sass list is number 1,
+    # the second number 2, and so forth.
+    #
+    # @example
+    #   nth(10px 20px 30px, 1) => 10px
+    #   nth((Helvetica, Arial, sans-serif), 3) => sans-serif
+    # @param list [Literal] The list
+    # @param n [Number] The index into the list
+    # @return [Literal] The nth item in the list
+    # @raise [ArgumentError] If `n` isn't an integer between 1 and the list's length.
+    def nth(list, n)
+      assert_type n, :Number
+      if !n.int?
+        raise ArgumentError.new("List index #{n} must be an integer")
+      elsif n.to_i < 1
+        raise ArgumentError.new("List index #{n} must be greater than or equal to 1")
+      elsif list.to_a.size == 0
+        raise ArgumentError.new("List index is #{n} but list has no items")
+      elsif n.to_i > (size = list.to_a.size)
+        raise ArgumentError.new("List index is #{n} but list is only #{size} item#{'s' if size != 1} long")
+      end
+
+      list.to_a[n.to_i - 1]
+    end
+    declare :nth, [:list, :n]
+
+    # Joins together two lists into a new list.
+    #
+    # Unless the `$separator` argument is passed,
+    # if one list is comma-separated and one is space-separated,
+    # the first parameter's separator is used for the resulting list.
+    # If the lists have only one item each, spaces are used for the resulting list.
+    #
+    # @example
+    #   join(10px 20px, 30px 40px) => 10px 20px 30px 40px
+    #   join((blue, red), (#abc, #def)) => blue, red, #abc, #def
+    #   join(10px, 20px) => 10px 20px
+    #   join(10px, 20px, comma) => 10px, 20px
+    #   join((blue, red), (#abc, #def), space) => blue red #abc #def
+    # @overload join(list1, list2, separator: auto)
+    #   @param list1 [Literal] The first list to join
+    #   @param list2 [Literal] The second list to join
+    #   @param separator [String] How the list separator (comma or space) should be determined.
+    #     If this is `comma` or `space`, that is always the separator;
+    #     if this is `auto` (the default), the separator is determined as explained above.
+    def join(list1, list2, separator = Sass::Script::String.new("auto"))
+      assert_type separator, :String
+      unless %w[auto space comma].include?(separator.value)
+        raise ArgumentError.new("Separator name must be space, comma, or auto")
+      end
+      sep1 = list1.separator if list1.is_a?(Sass::Script::List) && !list1.value.empty?
+      sep2 = list2.separator if list2.is_a?(Sass::Script::List) && !list2.value.empty?
+      Sass::Script::List.new(
+        list1.to_a + list2.to_a,
+        if separator.value == 'auto'
+          sep1 || sep2 || :space
+        else
+          separator.value.to_sym
+        end)
+    end
+    declare :join, [:list1, :list2]
+    declare :join, [:list1, :list2, :separator]
+
+    # Appends a single value onto the end of a list.
+    #
+    # Unless the `$separator` argument is passed,
+    # if the list has only one item,
+    # the resulting list will be space-separated.
+    #
+    # @example
+    #   append(10px 20px, 30px) => 10px 20px 30px
+    #   append((blue, red), green) => blue, red, green
+    #   append(10px 20px, 30px 40px) => 10px 20px (30px 40px)
+    #   join(10px, 20px, comma) => 10px, 20px
+    #   join((blue, red), green, space) => blue red green
+    # @overload join(list, val, separator: auto)
+    #   @param list1 [Literal] The first list to join
+    #   @param list2 [Literal] The second list to join
+    #   @param separator [String] How the list separator (comma or space) should be determined.
+    #     If this is `comma` or `space`, that is always the separator;
+    #     if this is `auto` (the default), the separator is determined as explained above.
+    def append(list, val, separator = Sass::Script::String.new("auto"))
+      assert_type separator, :String
+      unless %w[auto space comma].include?(separator.value)
+        raise ArgumentError.new("Separator name must be space, comma, or auto")
+      end
+      sep = list.separator if list.is_a?(Sass::Script::List)
+      Sass::Script::List.new(
+        list.to_a + [val],
+        if separator.value == 'auto'
+          sep || :space
+        else
+          separator.value.to_sym
+        end)
+    end
+    declare :append, [:list, :val]
+    declare :append, [:list, :val, :separator]
+
+    # Combines several lists into a single comma separated list
+    # space separated lists.
+    #
+    # The length of the resulting list is the length of the
+    # shortest list.
+    #
+    # @example
+    #   zip(1px 1px 3px, solid dashed solid, red green blue)
+    #   => 1px solid red, 1px dashed green, 3px solid blue
+    def zip(*lists)
+      length = nil
+      values = []
+      lists.each do |list|
+        assert_type list, :List
+        values << list.value.dup
+        length = length.nil? ? list.value.length : [length, list.value.length].min
+      end
+      values.each do |value|
+        value.slice!(length)
+      end
+      new_list_value = values.first.zip(*values[1..-1])
+      List.new(new_list_value.map{|list| List.new(list, :space)}, :comma)
+    end
+    declare :zip, [], :var_args => true
+
+
+    # Returns the position of the given value within the given
+    # list. If not found, returns false.
+    #
+    # @example
+    #   index(1px solid red, solid) => 2
+    #   index(1px solid red, dashed) => false
+    def index(list, value)
+      assert_type list, :List
+      index = list.value.index {|e| e.eq(value).to_bool }
+      if index
+        Number.new(index + 1)
+      else
+        Bool.new(false)
+      end
+    end
+    declare :index, [:list, :value]
+
+    # Returns one of two values based on the truth value of the first argument.
+    #
+    # @example
+    #   if(true, 1px, 2px) => 1px
+    #   if(false, 1px, 2px) => 2px
+    # @param condition [Bool] Whether the first or second value will be returned.
+    # @param if_true [Literal] The value that will be returned if `$condition` is true.
+    # @param if_false [Literal] The value that will be returned if `$condition` is false.
+    def if(condition, if_true, if_false)
+      if condition.to_bool
+        if_true
+      else
+        if_false
+      end
+    end
+    declare :if, [:condition, :if_true, :if_false]
+
+    private
+
+    # This method implements the pattern of transforming a numeric value into
+    # another numeric value with the same units.
+    # It yields a number to a block to perform the operation and return a number
+    def numeric_transformation(value)
+      assert_type value, :Number
+      Sass::Script::Number.new(yield(value.value), value.numerator_units, value.denominator_units)
+    end
+
+    def _adjust(color, amount, attr, range, op, units = "")
+      assert_type color, :Color
+      assert_type amount, :Number
+      unless range.include?(amount.value)
+        raise ArgumentError.new("Amount #{amount} must be between #{range.first}#{units} and #{range.last}#{units}")
+      end
+
+      # TODO: is it worth restricting here,
+      # or should we do so in the Color constructor itself,
+      # and allow clipping in rgb() et al?
+      color.with(attr => Sass::Util.restrict(
+          color.send(attr).send(op, amount.value), range))
+    end
+  end
+end