citypay_api_client 1.0.2 → 1.1.1

data/lib/citypay_api_client/models/batch_transaction_result_model.rb

@@ -0,0 +1,421 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 6.2.1
+
+=end
+
+require 'date'
+require 'time'
+
+module CityPayApiClient
+  class BatchTransactionResultModel
+    # The card holder account id used for the transaction.
+    attr_accessor :account_id
+
+    # The amount of the transaction processed.
+    attr_accessor :amount
+
+    # The authorisation code of a successful transaction.
+    attr_accessor :authcode
+
+    # The datetime that the transaction was processed.
+    attr_accessor :datetime
+
+    # The identifier of the transaction.
+    attr_accessor :identifier
+
+    # A masked value of the card number used for processing displaying limited values that can be used on a receipt. 
+    attr_accessor :maskedpan
+
+    # The merchant id of the transaction.
+    attr_accessor :merchantid
+
+    # A response message pertaining to the transaction.
+    attr_accessor :message
+
+    # An integer result that indicates the outcome of the transaction. The Code value below maps to the result value  <table> <tr> <th>Code</th> <th>Abbrev</th> <th>Description</th> </tr> <tr><td>0</td><td>Declined</td><td>Declined</td></tr> <tr><td>1</td><td>Accepted</td><td>Accepted</td></tr> <tr><td>2</td><td>Rejected</td><td>Rejected</td></tr> <tr><td>3</td><td>Not Attempted</td><td>Not Attempted</td></tr> <tr><td>4</td><td>Referred</td><td>Referred</td></tr> <tr><td>5</td><td>PinRetry</td><td>Perform PIN Retry</td></tr> <tr><td>6</td><td>ForSigVer</td><td>Force Signature Verification</td></tr> <tr><td>7</td><td>Hold</td><td>Hold</td></tr> <tr><td>8</td><td>SecErr</td><td>Security Error</td></tr> <tr><td>9</td><td>CallAcq</td><td>Call Acquirer</td></tr> <tr><td>10</td><td>DNH</td><td>Do Not Honour</td></tr> <tr><td>11</td><td>RtnCrd</td><td>Retain Card</td></tr> <tr><td>12</td><td>ExprdCrd</td><td>Expired Card</td></tr> <tr><td>13</td><td>InvldCrd</td><td>Invalid Card No</td></tr> <tr><td>14</td><td>PinExcd</td><td>Pin Tries Exceeded</td></tr> <tr><td>15</td><td>PinInvld</td><td>Pin Invalid</td></tr> <tr><td>16</td><td>AuthReq</td><td>Authentication Required</td></tr> <tr><td>17</td><td>AuthenFail</td><td>Authentication Failed</td></tr> <tr><td>18</td><td>Verified</td><td>Card Verified</td></tr> <tr><td>19</td><td>Cancelled</td><td>Cancelled</td></tr> <tr><td>20</td><td>Un</td><td>Unknown</td></tr> <tr><td>21</td><td>Challenged</td><td>Challenged</td></tr> <tr><td>22</td><td>Decoupled</td><td>Decoupled</td></tr> <tr><td>23</td><td>Denied</td><td>Permission Denied</td></tr> </table> 
+    attr_accessor :result
+
+    # A result code of the transaction identifying the result of the transaction for success, rejection or decline.
+    attr_accessor :result_code
+
+    # A name of the card scheme of the transaction that processed the transaction such as Visa or MasterCard. 
+    attr_accessor :scheme
+
+    # The resulting transaction number, ordered incrementally from 1 for every merchant_id. The value will default to less than 1 for transactions that do not have a transaction number issued. 
+    attr_accessor :transno
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'account_id' => :'account_id',
+        :'amount' => :'amount',
+        :'authcode' => :'authcode',
+        :'datetime' => :'datetime',
+        :'identifier' => :'identifier',
+        :'maskedpan' => :'maskedpan',
+        :'merchantid' => :'merchantid',
+        :'message' => :'message',
+        :'result' => :'result',
+        :'result_code' => :'result_code',
+        :'scheme' => :'scheme',
+        :'transno' => :'transno'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'account_id' => :'String',
+        :'amount' => :'Integer',
+        :'authcode' => :'String',
+        :'datetime' => :'Time',
+        :'identifier' => :'String',
+        :'maskedpan' => :'String',
+        :'merchantid' => :'Integer',
+        :'message' => :'String',
+        :'result' => :'Integer',
+        :'result_code' => :'String',
+        :'scheme' => :'String',
+        :'transno' => :'Integer'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `CityPayApiClient::BatchTransactionResultModel` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `CityPayApiClient::BatchTransactionResultModel`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'account_id')
+        self.account_id = attributes[:'account_id']
+      end
+
+      if attributes.key?(:'amount')
+        self.amount = attributes[:'amount']
+      end
+
+      if attributes.key?(:'authcode')
+        self.authcode = attributes[:'authcode']
+      end
+
+      if attributes.key?(:'datetime')
+        self.datetime = attributes[:'datetime']
+      end
+
+      if attributes.key?(:'identifier')
+        self.identifier = attributes[:'identifier']
+      end
+
+      if attributes.key?(:'maskedpan')
+        self.maskedpan = attributes[:'maskedpan']
+      end
+
+      if attributes.key?(:'merchantid')
+        self.merchantid = attributes[:'merchantid']
+      end
+
+      if attributes.key?(:'message')
+        self.message = attributes[:'message']
+      end
+
+      if attributes.key?(:'result')
+        self.result = attributes[:'result']
+      end
+
+      if attributes.key?(:'result_code')
+        self.result_code = attributes[:'result_code']
+      end
+
+      if attributes.key?(:'scheme')
+        self.scheme = attributes[:'scheme']
+      end
+
+      if attributes.key?(:'transno')
+        self.transno = attributes[:'transno']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @account_id.nil?
+        invalid_properties.push('invalid value for "account_id", account_id cannot be nil.')
+      end
+
+      if @account_id.to_s.length > 50
+        invalid_properties.push('invalid value for "account_id", the character length must be smaller than or equal to 50.')
+      end
+
+      if @account_id.to_s.length < 5
+        invalid_properties.push('invalid value for "account_id", the character length must be great than or equal to 5.')
+      end
+
+      if @identifier.nil?
+        invalid_properties.push('invalid value for "identifier", identifier cannot be nil.')
+      end
+
+      if @identifier.to_s.length > 50
+        invalid_properties.push('invalid value for "identifier", the character length must be smaller than or equal to 50.')
+      end
+
+      if @identifier.to_s.length < 4
+        invalid_properties.push('invalid value for "identifier", the character length must be great than or equal to 4.')
+      end
+
+      if @merchantid.nil?
+        invalid_properties.push('invalid value for "merchantid", merchantid cannot be nil.')
+      end
+
+      if @message.nil?
+        invalid_properties.push('invalid value for "message", message cannot be nil.')
+      end
+
+      if @result.nil?
+        invalid_properties.push('invalid value for "result", result cannot be nil.')
+      end
+
+      if @result_code.nil?
+        invalid_properties.push('invalid value for "result_code", result_code cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @account_id.nil?
+      return false if @account_id.to_s.length > 50
+      return false if @account_id.to_s.length < 5
+      return false if @identifier.nil?
+      return false if @identifier.to_s.length > 50
+      return false if @identifier.to_s.length < 4
+      return false if @merchantid.nil?
+      return false if @message.nil?
+      return false if @result.nil?
+      return false if @result_code.nil?
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] account_id Value to be assigned
+    def account_id=(account_id)
+      if account_id.nil?
+        fail ArgumentError, 'account_id cannot be nil'
+      end
+
+      if account_id.to_s.length > 50
+        fail ArgumentError, 'invalid value for "account_id", the character length must be smaller than or equal to 50.'
+      end
+
+      if account_id.to_s.length < 5
+        fail ArgumentError, 'invalid value for "account_id", the character length must be great than or equal to 5.'
+      end
+
+      @account_id = account_id
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] amount Value to be assigned
+    def amount=(amount)
+      @amount = amount
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] identifier Value to be assigned
+    def identifier=(identifier)
+      if identifier.nil?
+        fail ArgumentError, 'identifier cannot be nil'
+      end
+
+      if identifier.to_s.length > 50
+        fail ArgumentError, 'invalid value for "identifier", the character length must be smaller than or equal to 50.'
+      end
+
+      if identifier.to_s.length < 4
+        fail ArgumentError, 'invalid value for "identifier", the character length must be great than or equal to 4.'
+      end
+
+      @identifier = identifier
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          account_id == o.account_id &&
+          amount == o.amount &&
+          authcode == o.authcode &&
+          datetime == o.datetime &&
+          identifier == o.identifier &&
+          maskedpan == o.maskedpan &&
+          merchantid == o.merchantid &&
+          message == o.message &&
+          result == o.result &&
+          result_code == o.result_code &&
+          scheme == o.scheme &&
+          transno == o.transno
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [account_id, amount, authcode, datetime, identifier, maskedpan, merchantid, message, result, result_code, scheme, transno].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end