citypay_api_client 1.0.2 → 1.1.1

data/lib/citypay_api_client/models/auth_response.rb

@@ -1,15 +1,16 @@
 =begin
 #CityPay Payment API
 
-# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
 
 Contact: support@citypay.com
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.0-SNAPSHOT
+OpenAPI Generator version: 6.2.1
 
 =end
 
 require 'date'
+require 'time'
 
 module CityPayApiClient
   class AuthResponse
@@ -25,13 +26,13 @@ module CityPayApiClient
     # The authorisation code as returned by the card issuer or acquiring bank when a transaction has successfully   been authorised. Authorisation codes contain alphanumeric values. Whilst the code confirms authorisation it   should not be used to determine whether a transaction was successfully processed. For instance an auth code   may be returned when a transaction has been subsequently declined due to a CSC mismatch. 
     attr_accessor :authcode
 
-    # The result of any authentication using 3d_secure authorisation against ecommerce transactions. Values are | Value | Description | |-------|-------------| | Y | Authentication Successful. The Cardholder's password was successfully validated. | | N | Authentication Failed. Customer failed or cancelled authentication, transaction denied. | | A | Attempts Processing Performed Authentication could not be completed but a proof of authentication attempt (CAVV) was generated | | U | Authentication Could Not Be Performed Authentication could not be completed, due to technical or other problem | 
+    # The result of any authentication using 3d_secure authorisation against ecommerce transactions. Values are:  <table> <tr> <th>Value</th> <th>Description</th> </tr> <tr> <td>Y</td> <td>Authentication Successful. The Cardholder's password was successfully validated.</td> </tr> <tr> <td>N</td> <td>Authentication Failed. Customer failed or cancelled authentication, transaction denied.</td> </tr> <tr> <td>A</td> <td>Attempts Processing Performed Authentication could not be completed but a proof of authentication attempt (CAVV) was generated.</td> </tr> <tr> <td>U</td> <td>Authentication Could Not Be Performed Authentication could not be completed, due to technical or other problem.</td> </tr> </table> 
     attr_accessor :authen_result
 
-    # A boolean definition that indicates that the transaction was authorised. It will return false if the transaction  was declined, rejected or cancelled due to CSC matching failures. Attention should be referenced to the AuthResult and Response code for accurate determination of the result. 
+    # A boolean definition that indicates that the transaction was authorised. It will return false if the transaction  was declined, rejected or cancelled due to CSC matching failures.  Attention should be referenced to the AuthResult and Response code for accurate determination of the result. 
     attr_accessor :authorised
 
-    # The AVS result codes determine the result of checking the AVS values within the Address Verification fraud system. If a transaction is declined due to the AVS code not matching, this value can help determine the reason for the decline.   | Code | Description |  |------|------------|  | Y | Address and 5 digit post code match |  | M | Street address and Postal codes match for international transaction |  | U | No AVS data available from issuer auth system |  | A | Addres matches, post code does not |  | I | Address information verified for international transaction |  | Z | 5 digit post code matches, Address does not |  | W | 9 digit post code matches, Address does not |  | X | Postcode and address match |  | B | Postal code not verified due to incompatible formats |  | P | Postal codes match. Street address not verified due to to incompatible formats |  | E | AVS Error |  | C | Street address and Postal code not verified due to incompatible formats |  | D | Street address and postal codes match |  |   | No information |  | N | Neither postcode nor address match |  | R | Retry, System unavailble or Timed Out |  | S | AVS Service not supported by issuer or processor |  | G | Issuer does not participate in AVS | 
+    # The AVS result codes determine the result of checking the AVS values within the Address Verification fraud system. If a transaction is declined due to the AVS code not matching, this value can help determine the reason for the decline.  <table> <tr> <th>Code</th> <th>Description</th> </tr> <tr><td>Y</td><td>Address and 5 digit post code match</td></tr> <tr><td>M</td><td>Street address and Postal codes match for international transaction</td></tr> <tr><td>U</td><td>No AVS data available from issuer auth system</td></tr> <tr><td>A</td><td>Addres matches, post code does not</td></tr> <tr><td>I</td><td>Address information verified for international transaction</td></tr> <tr><td>Z</td><td>5 digit post code matches, Address does not</td></tr> <tr><td>W</td><td>9 digit post code matches, Address does not</td></tr> <tr><td>X</td><td>Postcode and address match</td></tr> <tr><td>B</td><td>Postal code not verified due to incompatible formats</td></tr> <tr><td>P</td><td>Postal codes match. Street address not verified due to to incompatible formats</td></tr> <tr><td>E</td><td>AVS Error</td></tr> <tr><td>C</td><td>Street address and Postal code not verified due to incompatible formats</td></tr> <tr><td>D</td><td>Street address and postal codes match</td></tr> <tr><td> </td><td>No information</td></tr> <tr><td>N</td><td>Neither postcode nor address match</td></tr> <tr><td>R</td><td>Retry, System unavailble or Timed Out</td></tr> <tr><td>S</td><td>AVS Service not supported by issuer or processor</td></tr> <tr><td>G</td><td>Issuer does not participate in AVS</td></tr> </table> 
     attr_accessor :avs_result
 
     # Determines whether the bin range was found to be a commercial or business card.
@@ -49,7 +50,7 @@ module CityPayApiClient
     # The context which processed the transaction, can be used for support purposes to trace transactions.
     attr_accessor :context
 
-    # The CSC rseult codes determine the result of checking the provided CSC value within the Card Security Code fraud system. If a transaction is declined due to the CSC code not matching, this value can help determine the reason for the decline.   | Code | Description |  |------|------------|  |   | No information |  | M | Card verification data matches |  | N | Card verification data was checked but did not match |  | P | Card verification was not processed |  | S | The card verification data should be on the card but the merchant indicates that it is not |  | U | The card issuer is not certified | 
+    # The CSC rseult codes determine the result of checking the provided CSC value within the Card Security Code fraud system. If a transaction is declined due to the CSC code not matching, this value can help determine the reason for the decline.  <table> <tr> <th>Code</th> <th>Description</th> </tr> <tr><td> </td><td>No information</td></tr> <tr><td>M</td><td>Card verification data matches</td></tr> <tr><td>N</td><td>Card verification data was checked but did not match</td></tr> <tr><td>P</td><td>Card verification was not processed</td></tr> <tr><td>S</td><td>The card verification data should be on the card but the merchant indicates that it is not</td></tr> <tr><td>U</td><td>The card issuer is not certified</td></tr> </table> 
     attr_accessor :csc_result
 
     # The currency the transaction was processed in. This is an `ISO4217` alpha currency value.
@@ -64,7 +65,7 @@ module CityPayApiClient
     # The identifier provided within the request.
     attr_accessor :identifier
 
-    # Used to identify that a tranasction was processed on a live authorisation platform.
+    # Used to identify that a transaction was processed on a live authorisation platform.
     attr_accessor :live
 
     # A masked value of the card number used for processing displaying limited values that can be used on a receipt. 
@@ -73,10 +74,10 @@ module CityPayApiClient
     # The merchant id that processed this transaction.
     attr_accessor :merchantid
 
-    # An integer result that indicates the outcome of the transaction. The Code value below maps to the result value   | Code | Abbrev | Description |  |------|-------|-------------|  | 0 | Declined | Declined |  | 1 | Accepted | Accepted |  | 2 | Rejected | Rejected |  | 3 | Not Attempted | Not Attempted |  | 4 | Referred | Referred |  | 5 | PinRetry | Perform PIN Retry |  | 6 | ForSigVer | Force Signature Verification |  | 7 | Hold | Hold |  | 8 | SecErr | Security Error |  | 9 | CallAcq | Call Acquirer |  | 10 | DNH | Do Not Honour |  | 11 | RtnCrd | Retain Card |  | 12 | ExprdCrd | Expired Card |  | 13 | InvldCrd | Invalid Card No |  | 14 | PinExcd | Pin Tries Exceeded |  | 15 | PinInvld | Pin Invalid |  | 16 | AuthReq | Authentication Required |  | 17 | AuthenFail | Authentication Failed |  | 18 | Verified | Card Verified |  | 19 | Cancelled | Cancelled |  | 20 | Un | Unknown | 
+    # An integer result that indicates the outcome of the transaction. The Code value below maps to the result value  <table> <tr> <th>Code</th> <th>Abbrev</th> <th>Description</th> </tr> <tr><td>0</td><td>Declined</td><td>Declined</td></tr> <tr><td>1</td><td>Accepted</td><td>Accepted</td></tr> <tr><td>2</td><td>Rejected</td><td>Rejected</td></tr> <tr><td>3</td><td>Not Attempted</td><td>Not Attempted</td></tr> <tr><td>4</td><td>Referred</td><td>Referred</td></tr> <tr><td>5</td><td>PinRetry</td><td>Perform PIN Retry</td></tr> <tr><td>6</td><td>ForSigVer</td><td>Force Signature Verification</td></tr> <tr><td>7</td><td>Hold</td><td>Hold</td></tr> <tr><td>8</td><td>SecErr</td><td>Security Error</td></tr> <tr><td>9</td><td>CallAcq</td><td>Call Acquirer</td></tr> <tr><td>10</td><td>DNH</td><td>Do Not Honour</td></tr> <tr><td>11</td><td>RtnCrd</td><td>Retain Card</td></tr> <tr><td>12</td><td>ExprdCrd</td><td>Expired Card</td></tr> <tr><td>13</td><td>InvldCrd</td><td>Invalid Card No</td></tr> <tr><td>14</td><td>PinExcd</td><td>Pin Tries Exceeded</td></tr> <tr><td>15</td><td>PinInvld</td><td>Pin Invalid</td></tr> <tr><td>16</td><td>AuthReq</td><td>Authentication Required</td></tr> <tr><td>17</td><td>AuthenFail</td><td>Authentication Failed</td></tr> <tr><td>18</td><td>Verified</td><td>Card Verified</td></tr> <tr><td>19</td><td>Cancelled</td><td>Cancelled</td></tr> <tr><td>20</td><td>Un</td><td>Unknown</td></tr> <tr><td>21</td><td>Challenged</td><td>Challenged</td></tr> <tr><td>22</td><td>Decoupled</td><td>Decoupled</td></tr> <tr><td>23</td><td>Denied</td><td>Permission Denied</td></tr> </table> 
     attr_accessor :result
 
-    # The result code as defined in the Response Codes Reference for example 000 is an accepted live transaction whilst 001 is an accepted test transaction. Result codes identify the source of success and failure. Codes may start with an alpha character i.e. C001 indicating a type of error such as a card validation error. 
+    # The result code as defined in the Response Codes Reference for example 000 is an accepted live transaction whilst 001 is an accepted test transaction. Result codes identify the source of success and failure.  Codes may start with an alpha character i.e. C001 indicating a type of error such as a card validation error. 
     attr_accessor :result_code
 
     # The message regarding the result which provides further narrative to the result code. 
@@ -85,10 +86,10 @@ module CityPayApiClient
     # A name of the card scheme of the transaction that processed the transaction such as Visa or MasterCard. 
     attr_accessor :scheme
 
-    # A SHA256 digest value of the transaction used to validate the response data The digest is calculated by concatenating  * authcode  * amount  * response_code  * merchant_id  * trans_no  * identifier  * licence_key - which is not provided in the response. 
+    # A SHA256 digest value of the transaction used to validate the response data The digest is calculated by concatenating   * authcode   * amount   * response_code   * merchant_id   * trans_no   * identifier   * licence_key - which is not provided in the response. 
     attr_accessor :sha256
 
-    # Used to identify the status of a transaction. The status is used to track a transaction through its life cycle.  | Id | Description | |----|-------------| | O | Transaction is open for settlement | | A | Transaction is assigned for settlement and can no longer be voided | | S | Transaction has been settled   | | D | Transaction has been declined | | R | Transaction has been rejected | | P | Transaction has been authorised only and awaiting a capture. Used in pre-auth situations | | C | Transaction has been cancelled | | E | Transaction has expired | | I | Transaction has been initialised but no action was able to be carried out | | H | Transaction is awaiting authorisation | | . | Transaction is on hold | | V | Transaction has been verified | 
+    # Used to identify the status of a transaction. The status is used to track a transaction through its life cycle.  <table> <tr> <th>Id</th> <th>Description</th> </tr> <tr> <td>O</td> <td>Transaction is open for settlement</td> </tr> <tr> <td>A</td> <td>Transaction is assigned for settlement and can no longer be voided</td> </tr> <tr> <td>S</td> <td>Transaction has been settled</td> </tr> <tr> <td>D</td> <td>Transaction has been declined</td> </tr> <tr> <td>R</td> <td>Transaction has been rejected</td> </tr> <tr> <td>P</td> <td>Transaction has been authorised only and awaiting a capture. Used in pre-auth situations</td> </tr> <tr> <td>C</td> <td>Transaction has been cancelled</td> </tr> <tr> <td>E</td> <td>Transaction has expired</td> </tr> <tr> <td>I</td> <td>Transaction has been initialised but no action was able to be carried out</td> </tr> <tr> <td>H</td> <td>Transaction is awaiting authorisation</td> </tr> <tr> <td>.</td> <td>Transaction is on hold</td> </tr> <tr> <td>V</td> <td>Transaction has been verified</td> </tr> </table> 
     attr_accessor :trans_status
 
     # The resulting transaction number, ordered incrementally from 1 for every merchant_id. The value will default to less than 1 for transactions that do not have a transaction number issued. 
@@ -127,6 +128,11 @@ module CityPayApiClient
       }
     end
 
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
     # Attribute type mapping.
     def self.openapi_types
       {
@@ -144,7 +150,7 @@ module CityPayApiClient
         :'context' => :'String',
         :'csc_result' => :'String',
         :'currency' => :'String',
-        :'datetime' => :'DateTime',
+        :'datetime' => :'Time',
         :'eci' => :'String',
         :'identifier' => :'String',
         :'live' => :'Boolean',
@@ -294,36 +300,20 @@ module CityPayApiClient
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@avs_result.nil? && @avs_result.to_s.length > 1
-        invalid_properties.push('invalid value for "avs_result", the character length must be smaller than or equal to 1.')
-      end
-
-      if !@avs_result.nil? && @avs_result.to_s.length < 1
-        invalid_properties.push('invalid value for "avs_result", the character length must be great than or equal to 1.')
-      end
-
-      if !@csc_result.nil? && @csc_result.to_s.length > 1
-        invalid_properties.push('invalid value for "csc_result", the character length must be smaller than or equal to 1.')
-      end
-
-      if !@csc_result.nil? && @csc_result.to_s.length < 1
-        invalid_properties.push('invalid value for "csc_result", the character length must be great than or equal to 1.')
-      end
-
-      if !@currency.nil? && @currency.to_s.length > 3
-        invalid_properties.push('invalid value for "currency", the character length must be smaller than or equal to 3.')
+      if @merchantid.nil?
+        invalid_properties.push('invalid value for "merchantid", merchantid cannot be nil.')
       end
 
-      if !@currency.nil? && @currency.to_s.length < 3
-        invalid_properties.push('invalid value for "currency", the character length must be great than or equal to 3.')
+      if @result.nil?
+        invalid_properties.push('invalid value for "result", result cannot be nil.')
       end
 
-      if !@identifier.nil? && @identifier.to_s.length > 50
-        invalid_properties.push('invalid value for "identifier", the character length must be smaller than or equal to 50.')
+      if @result_code.nil?
+        invalid_properties.push('invalid value for "result_code", result_code cannot be nil.')
       end
 
-      if !@identifier.nil? && @identifier.to_s.length < 4
-        invalid_properties.push('invalid value for "identifier", the character length must be great than or equal to 4.')
+      if @result_message.nil?
+        invalid_properties.push('invalid value for "result_message", result_message cannot be nil.')
       end
 
       invalid_properties
@@ -332,73 +322,13 @@ module CityPayApiClient
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@avs_result.nil? && @avs_result.to_s.length > 1
-      return false if !@avs_result.nil? && @avs_result.to_s.length < 1
-      return false if !@csc_result.nil? && @csc_result.to_s.length > 1
-      return false if !@csc_result.nil? && @csc_result.to_s.length < 1
-      return false if !@currency.nil? && @currency.to_s.length > 3
-      return false if !@currency.nil? && @currency.to_s.length < 3
-      return false if !@identifier.nil? && @identifier.to_s.length > 50
-      return false if !@identifier.nil? && @identifier.to_s.length < 4
+      return false if @merchantid.nil?
+      return false if @result.nil?
+      return false if @result_code.nil?
+      return false if @result_message.nil?
       true
     end
 
-    # Custom attribute writer method with validation
-    # @param [Object] avs_result Value to be assigned
-    def avs_result=(avs_result)
-      if !avs_result.nil? && avs_result.to_s.length > 1
-        fail ArgumentError, 'invalid value for "avs_result", the character length must be smaller than or equal to 1.'
-      end
-
-      if !avs_result.nil? && avs_result.to_s.length < 1
-        fail ArgumentError, 'invalid value for "avs_result", the character length must be great than or equal to 1.'
-      end
-
-      @avs_result = avs_result
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] csc_result Value to be assigned
-    def csc_result=(csc_result)
-      if !csc_result.nil? && csc_result.to_s.length > 1
-        fail ArgumentError, 'invalid value for "csc_result", the character length must be smaller than or equal to 1.'
-      end
-
-      if !csc_result.nil? && csc_result.to_s.length < 1
-        fail ArgumentError, 'invalid value for "csc_result", the character length must be great than or equal to 1.'
-      end
-
-      @csc_result = csc_result
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] currency Value to be assigned
-    def currency=(currency)
-      if !currency.nil? && currency.to_s.length > 3
-        fail ArgumentError, 'invalid value for "currency", the character length must be smaller than or equal to 3.'
-      end
-
-      if !currency.nil? && currency.to_s.length < 3
-        fail ArgumentError, 'invalid value for "currency", the character length must be great than or equal to 3.'
-      end
-
-      @currency = currency
-    end
-
-    # Custom attribute writer method with validation
-    # @param [Object] identifier Value to be assigned
-    def identifier=(identifier)
-      if !identifier.nil? && identifier.to_s.length > 50
-        fail ArgumentError, 'invalid value for "identifier", the character length must be smaller than or equal to 50.'
-      end
-
-      if !identifier.nil? && identifier.to_s.length < 4
-        fail ArgumentError, 'invalid value for "identifier", the character length must be great than or equal to 4.'
-      end
-
-      @identifier = identifier
-    end
-
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)
@@ -457,8 +387,11 @@ module CityPayApiClient
     # @return [Object] Returns the model itself
     def build_from_hash(attributes)
       return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
       self.class.openapi_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
           # check to ensure the input is an array given that the attribute
           # is documented as an array but the input is not
           if attributes[self.class.attribute_map[key]].is_a?(Array)
@@ -466,7 +399,7 @@ module CityPayApiClient
           end
         elsif !attributes[self.class.attribute_map[key]].nil?
           self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
+        end
       end
 
       self
@@ -478,8 +411,8 @@ module CityPayApiClient
     # @return [Object] Deserialized data
     def _deserialize(type, value)
       case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
+      when :Time
+        Time.parse(value)
       when :Date
         Date.parse(value)
       when :String
@@ -509,7 +442,9 @@ module CityPayApiClient
           end
         end
       else # model
-        CityPayApiClient.const_get(type).build_from_hash(value)
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
       end
     end
 
@@ -535,7 +470,7 @@ module CityPayApiClient
           is_nullable = self.class.openapi_nullable.include?(attr)
           next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
         end
-        
+
         hash[param] = _to_hash(value)
       end
       hash
@@ -558,5 +493,7 @@ module CityPayApiClient
         value
       end
     end
+
   end
+
 end

data/lib/citypay_api_client/models/authen_required.rb

@@ -1,15 +1,16 @@
 =begin
 #CityPay Payment API
 
-# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
 
 Contact: support@citypay.com
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.0-SNAPSHOT
+OpenAPI Generator version: 6.2.1
 
 =end
 
 require 'date'
+require 'time'
 
 module CityPayApiClient
   class AuthenRequired
@@ -31,6 +32,11 @@ module CityPayApiClient
       }
     end
 
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
     # Attribute type mapping.
     def self.openapi_types
       {
@@ -121,8 +127,11 @@ module CityPayApiClient
     # @return [Object] Returns the model itself
     def build_from_hash(attributes)
       return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
       self.class.openapi_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
           # check to ensure the input is an array given that the attribute
           # is documented as an array but the input is not
           if attributes[self.class.attribute_map[key]].is_a?(Array)
@@ -130,7 +139,7 @@ module CityPayApiClient
           end
         elsif !attributes[self.class.attribute_map[key]].nil?
           self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
+        end
       end
 
       self
@@ -142,8 +151,8 @@ module CityPayApiClient
     # @return [Object] Deserialized data
     def _deserialize(type, value)
       case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
+      when :Time
+        Time.parse(value)
       when :Date
         Date.parse(value)
       when :String
@@ -173,7 +182,9 @@ module CityPayApiClient
           end
         end
       else # model
-        CityPayApiClient.const_get(type).build_from_hash(value)
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
       end
     end
 
@@ -199,7 +210,7 @@ module CityPayApiClient
           is_nullable = self.class.openapi_nullable.include?(attr)
           next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
         end
-        
+
         hash[param] = _to_hash(value)
       end
       hash
@@ -222,5 +233,7 @@ module CityPayApiClient
         value
       end
     end
+
   end
+
 end