chef 14.5.27-universal-mingw32 → 14.5.33-universal-mingw32

data/lib/chef/knife/show.rb

@@ -1,72 +1,72 @@
-#
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-require "chef/chef_fs/knife"
-
-class Chef
-  class Knife
-    class Show < Chef::ChefFS::Knife
-      banner "knife show [PATTERN1 ... PATTERNn]"
-
-      category "path-based"
-
-      deps do
-        require "chef/chef_fs/file_system"
-        require "chef/chef_fs/file_system/exceptions"
-      end
-
-      option :local,
-        long: "--local",
-        boolean: true,
-        description: "Show local files instead of remote."
-
-      def run
-        # Get the matches (recursively)
-        error = false
-        entry_values = parallelize(pattern_args) do |pattern|
-          parallelize(Chef::ChefFS::FileSystem.list(config[:local] ? local_fs : chef_fs, pattern)) do |entry|
-            if entry.dir?
-              ui.error "#{format_path(entry)}: is a directory" if pattern.exact_path
-              error = true
-              nil
-            else
-              begin
-                [entry, entry.read]
-              rescue Chef::ChefFS::FileSystem::OperationNotAllowedError => e
-                ui.error "#{format_path(e.entry)}: #{e.reason}."
-                error = true
-                nil
-              rescue Chef::ChefFS::FileSystem::NotFoundError => e
-                ui.error "#{format_path(e.entry)}: No such file or directory"
-                error = true
-                nil
-              end
-            end
-          end
-        end.flatten(1)
-        entry_values.each do |entry, value|
-          if entry
-            output "#{format_path(entry)}:"
-            output(format_for_display(value))
-          end
-        end
-        if error
-          exit 1
-        end
-      end
-    end
-  end
-end
+#
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require "chef/chef_fs/knife"
+
+class Chef
+  class Knife
+    class Show < Chef::ChefFS::Knife
+      banner "knife show [PATTERN1 ... PATTERNn]"
+
+      category "path-based"
+
+      deps do
+        require "chef/chef_fs/file_system"
+        require "chef/chef_fs/file_system/exceptions"
+      end
+
+      option :local,
+        long: "--local",
+        boolean: true,
+        description: "Show local files instead of remote."
+
+      def run
+        # Get the matches (recursively)
+        error = false
+        entry_values = parallelize(pattern_args) do |pattern|
+          parallelize(Chef::ChefFS::FileSystem.list(config[:local] ? local_fs : chef_fs, pattern)) do |entry|
+            if entry.dir?
+              ui.error "#{format_path(entry)}: is a directory" if pattern.exact_path
+              error = true
+              nil
+            else
+              begin
+                [entry, entry.read]
+              rescue Chef::ChefFS::FileSystem::OperationNotAllowedError => e
+                ui.error "#{format_path(e.entry)}: #{e.reason}."
+                error = true
+                nil
+              rescue Chef::ChefFS::FileSystem::NotFoundError => e
+                ui.error "#{format_path(e.entry)}: No such file or directory"
+                error = true
+                nil
+              end
+            end
+          end
+        end.flatten(1)
+        entry_values.each do |entry, value|
+          if entry
+            output "#{format_path(entry)}:"
+            output(format_for_display(value))
+          end
+        end
+        if error
+          exit 1
+        end
+      end
+    end
+  end
+end

data/lib/chef/knife/ssh.rb

@@ -1,634 +1,634 @@
-#
-# Author:: Adam Jacob (<adam@chef.io>)
-# Copyright:: Copyright 2009-2018, Chef Software Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-require "chef/mixin/shell_out"
-require "chef/knife"
-
-class Chef
-  class Knife
-    class Ssh < Knife
-
-      deps do
-        require "net/ssh"
-        require "net/ssh/multi"
-        require "readline"
-        require "chef/exceptions"
-        require "chef/search/query"
-        require "chef/util/path_helper"
-        require "mixlib/shellout"
-      end
-
-      include Chef::Mixin::ShellOut
-
-      attr_writer :password
-
-      banner "knife ssh QUERY COMMAND (options)"
-
-      option :concurrency,
-        short: "-C NUM",
-        long: "--concurrency NUM",
-        description: "The number of concurrent connections.",
-        default: nil,
-        proc: lambda { |o| o.to_i }
-
-      option :ssh_attribute,
-        short: "-a ATTR",
-        long: "--attribute ATTR",
-        description: "The attribute to use for opening the connection - default depends on the context."
-
-      option :manual,
-        short: "-m",
-        long: "--manual-list",
-        boolean: true,
-        description: "QUERY is a space separated list of servers.",
-        default: false
-
-      option :prefix_attribute,
-        long: "--prefix-attribute ATTR",
-        description: "The attribute to use for prefixing the ouput - default depends on the context."
-
-      option :ssh_user,
-        short: "-x USERNAME",
-        long: "--ssh-user USERNAME",
-        description: "The ssh username."
-
-      option :ssh_password_ng,
-        short: "-P [PASSWORD]",
-        long: "--ssh-password [PASSWORD]",
-        description: "The ssh password - will prompt if flag is specified but no password is given.",
-        # default to a value that can not be a password (boolean)
-        # so we can effectively test if this parameter was specified
-        # without a value
-        default: false
-
-      option :ssh_port,
-        short: "-p PORT",
-        long: "--ssh-port PORT",
-        description: "The ssh port.",
-        proc: Proc.new { |key| Chef::Config[:knife][:ssh_port] = key.strip }
-
-      option :ssh_timeout,
-        short: "-t SECONDS",
-        long: "--ssh-timeout SECONDS",
-        description: "The ssh connection timeout.",
-        proc: Proc.new { |key| Chef::Config[:knife][:ssh_timeout] = key.strip.to_i },
-        default: 120
-
-      option :ssh_gateway,
-        short: "-G GATEWAY",
-        long: "--ssh-gateway GATEWAY",
-        description: "The ssh gateway.",
-        proc: Proc.new { |key| Chef::Config[:knife][:ssh_gateway] = key.strip }
-
-      option :ssh_gateway_identity,
-        long: "--ssh-gateway-identity SSH_GATEWAY_IDENTITY",
-        description: "The SSH identity file used for gateway authentication."
-
-      option :forward_agent,
-        short: "-A",
-        long: "--forward-agent",
-        description: "Enable SSH agent forwarding.",
-        boolean: true
-
-      option :ssh_identity_file,
-        short: "-i IDENTITY_FILE",
-        long: "--ssh-identity-file IDENTITY_FILE",
-        description: "The SSH identity file used for authentication."
-
-      option :host_key_verify,
-        long: "--[no-]host-key-verify",
-        description: "Verify host key, enabled by default.",
-        boolean: true,
-        default: true
-
-      option :on_error,
-        short: "-e",
-        long: "--exit-on-error",
-        description: "Immediately exit if an error is encountered.",
-        boolean: true,
-        default: false
-
-      option :duplicated_fqdns,
-        long: "--duplicated-fqdns",
-        description: "Behavior if FQDNs are duplicated, ignored by default.",
-        proc: Proc.new { |key| Chef::Config[:knife][:duplicated_fqdns] = key.strip.to_sym },
-        default: :ignore
-
-      option :tmux_split,
-        long: "--tmux-split",
-        description: "Split tmux window.",
-        boolean: true,
-        default: false
-
-      def session
-        ssh_error_handler = Proc.new do |server|
-          if config[:on_error]
-            # Net::SSH::Multi magic to force exception to be re-raised.
-            throw :go, :raise
-          else
-            ui.warn "Failed to connect to #{server.host} -- #{$!.class.name}: #{$!.message}"
-            $!.backtrace.each { |l| Chef::Log.debug(l) }
-          end
-        end
-
-        @session ||= Net::SSH::Multi.start(concurrent_connections: config[:concurrency], on_error: ssh_error_handler)
-      end
-
-      def configure_gateway
-        config[:ssh_gateway] ||= Chef::Config[:knife][:ssh_gateway]
-        if config[:ssh_gateway]
-          gw_host, gw_user = config[:ssh_gateway].split("@").reverse
-          gw_host, gw_port = gw_host.split(":")
-          gw_opts = session_options(gw_host, gw_port, gw_user, gateway: true)
-          user = gw_opts.delete(:user)
-
-          begin
-            # Try to connect with a key.
-            session.via(gw_host, user, gw_opts)
-          rescue Net::SSH::AuthenticationFailed
-            prompt = "Enter the password for #{user}@#{gw_host}: "
-            gw_opts[:password] = prompt_for_password(prompt)
-            # Try again with a password.
-            session.via(gw_host, user, gw_opts)
-          end
-        end
-      end
-
-      def configure_session
-        list = config[:manual] ? @name_args[0].split(" ") : search_nodes
-        if list.length == 0
-          if @search_count == 0
-            ui.fatal("No nodes returned from search")
-          else
-            ui.fatal("#{@search_count} #{@search_count > 1 ? "nodes" : "node"} found, " +
-                     "but does not have the required attribute to establish the connection. " +
-                     "Try setting another attribute to open the connection using --attribute.")
-          end
-          exit 10
-        end
-        if %i{warn fatal}.include?(config[:duplicated_fqdns])
-          fqdns = list.map { |v| v[0] }
-          if fqdns.count != fqdns.uniq.count
-            duplicated_fqdns = fqdns.uniq
-            ui.send(config[:duplicated_fqdns],
-              "SSH #{duplicated_fqdns.count > 1 ? 'nodes are' : 'node is'} " +
-              "duplicated: #{duplicated_fqdns.join(',')}")
-            exit 10 if config[:duplicated_fqdns] == :fatal
-          end
-        end
-        session_from_list(list)
-      end
-
-      def get_prefix_attribute(item)
-        # Order of precedence for prefix
-        # 1) config value (cli or knife config)
-        # 2) nil
-        msg = "Using node attribute '%s' as the prefix: %s"
-        if item["prefix"]
-          Chef::Log.debug(sprintf(msg, config[:prefix_attribute], item["prefix"]))
-          item["prefix"]
-        else
-          nil
-        end
-      end
-
-      def get_ssh_attribute(item)
-        # Order of precedence for ssh target
-        # 1) config value (cli or knife config)
-        # 2) cloud attribute
-        # 3) fqdn
-        msg = "Using node attribute '%s' as the ssh target: %s"
-        if item["target"]
-          Chef::Log.debug(sprintf(msg, config[:ssh_attribute], item["target"]))
-          item["target"]
-        elsif !item.dig("cloud", "public_hostname").to_s.empty?
-          Chef::Log.debug(sprintf(msg, "cloud.public_hostname", item["cloud"]["public_hostname"]))
-          item["cloud"]["public_hostname"]
-        else
-          Chef::Log.debug(sprintf(msg, "fqdn", item["fqdn"]))
-          item["fqdn"]
-        end
-      end
-
-      def search_nodes
-        list = Array.new
-        query = Chef::Search::Query.new
-        required_attributes = { fqdn: ["fqdn"], cloud: ["cloud"] }
-
-        separator = ui.presenter.attribute_field_separator
-
-        if config[:prefix_attribute]
-          required_attributes[:prefix] = config[:prefix_attribute].split(separator)
-        end
-
-        if config[:ssh_attribute]
-          required_attributes[:target] = config[:ssh_attribute].split(separator)
-        end
-
-        @search_count = 0
-        query.search(:node, @name_args[0], filter_result: required_attributes, fuzz: true) do |item|
-          @search_count += 1
-          # we should skip the loop to next iteration if the item
-          # returned by the search is nil
-          next if item.nil?
-          # next if we couldn't find the specified attribute in the
-          # returned node object
-          host = get_ssh_attribute(item)
-          next if host.nil?
-          prefix = get_prefix_attribute(item)
-          ssh_port = item.dig("cloud", "public_ssh_port")
-          srv = [host, ssh_port, prefix]
-          list.push(srv)
-        end
-
-        list
-      end
-
-      # Net::SSH session options hash for global options. These should be
-      # options that will apply to the gateway connection in addition to the
-      # main one.
-      #
-      # @since 12.5.0
-      # @param host [String] Hostname for this session.
-      # @param port [String] SSH port for this session.
-      # @param user [String] Optional username for this session.
-      # @param gateway [Boolean] Flag: host or gateway key
-      # @return [Hash<Symbol, Object>]
-      def session_options(host, port, user = nil, gateway: false)
-        ssh_config = Net::SSH.configuration_for(host, true)
-        {}.tap do |opts|
-          # Chef::Config[:knife][:ssh_user] is parsed in #configure_user and written to config[:ssh_user]
-          opts[:user] = user || config[:ssh_user] || ssh_config[:user]
-          if !gateway && config[:ssh_identity_file]
-            opts[:keys] = File.expand_path(config[:ssh_identity_file])
-            opts[:keys_only] = true
-          elsif gateway && config[:ssh_gateway_identity]
-            opts[:keys] = File.expand_path(config[:ssh_gateway_identity])
-            opts[:keys_only] = true
-          elsif config[:ssh_password]
-            opts[:password] = config[:ssh_password]
-          end
-          # Don't set the keys to nil if we don't have them.
-          forward_agent = config[:forward_agent] || ssh_config[:forward_agent]
-          opts[:forward_agent] = forward_agent unless forward_agent.nil?
-          port ||= ssh_config[:port]
-          opts[:port] = port unless port.nil?
-          opts[:logger] = Chef::Log.with_child(subsystem: "net/ssh") if Chef::Log.level == :trace
-          if !config[:host_key_verify]
-            opts[:verify_host_key] = false
-            opts[:user_known_hosts_file] = "/dev/null"
-          end
-          if ssh_config[:keepalive]
-            opts[:keepalive] = true
-            opts[:keepalive_interval] = ssh_config[:keepalive_interval]
-          end
-        end
-      end
-
-      def session_from_list(list)
-        list.each do |item|
-          host, ssh_port, prefix = item
-          prefix = host unless prefix
-          Chef::Log.debug("Adding #{host}")
-          session_opts = session_options(host, ssh_port, gateway: false)
-          # Handle port overrides for the main connection.
-          session_opts[:port] = Chef::Config[:knife][:ssh_port] if Chef::Config[:knife][:ssh_port]
-          session_opts[:port] = config[:ssh_port] if config[:ssh_port]
-          # Handle connection timeout
-          session_opts[:timeout] = Chef::Config[:knife][:ssh_timeout] if Chef::Config[:knife][:ssh_timeout]
-          session_opts[:timeout] = config[:ssh_timeout] if config[:ssh_timeout]
-          # Handle session prefix
-          session_opts[:properties] = { prefix: prefix }
-          # Create the hostspec.
-          hostspec = session_opts[:user] ? "#{session_opts.delete(:user)}@#{host}" : host
-          # Connect a new session on the multi.
-          session.use(hostspec, session_opts)
-
-          @longest = prefix.length if prefix.length > @longest
-        end
-
-        session
-      end
-
-      def fixup_sudo(command)
-        command.sub(/^sudo/, "sudo -p 'knife sudo password: '")
-      end
-
-      def print_data(host, data)
-        @buffers ||= {}
-        if leftover = @buffers[host]
-          @buffers[host] = nil
-          print_data(host, leftover + data)
-        else
-          if newline_index = data.index("\n")
-            line = data.slice!(0...newline_index)
-            data.slice!(0)
-            print_line(host, line)
-            print_data(host, data)
-          else
-            @buffers[host] = data
-          end
-        end
-      end
-
-      def print_line(host, data)
-        padding = @longest - host.length
-        str = ui.color(host, :cyan) + (" " * (padding + 1)) + data
-        ui.msg(str)
-      end
-
-      def ssh_command(command, subsession = nil)
-        exit_status = 0
-        subsession ||= session
-        command = fixup_sudo(command)
-        command.force_encoding("binary") if command.respond_to?(:force_encoding)
-        subsession.open_channel do |chan|
-          if config[:on_error] && exit_status != 0
-            chan.close()
-          else
-            chan.request_pty
-            chan.exec command do |ch, success|
-              raise ArgumentError, "Cannot execute #{command}" unless success
-              ch.on_data do |ichannel, data|
-                print_data(ichannel.connection[:prefix], data)
-                if data =~ /^knife sudo password: /
-                  print_data(ichannel.connection[:prefix], "\n")
-                  ichannel.send_data("#{get_password}\n")
-                end
-              end
-              ch.on_request "exit-status" do |ichannel, data|
-                exit_status = [exit_status, data.read_long].max
-              end
-            end
-          end
-        end
-        session.loop
-        exit_status
-      end
-
-      def get_password
-        @password ||= prompt_for_password
-      end
-
-      def prompt_for_password(prompt = "Enter your password: ")
-        ui.ask(prompt) { |q| q.echo = false }
-      end
-
-      # Present the prompt and read a single line from the console. It also
-      # detects ^D and returns "exit" in that case. Adds the input to the
-      # history, unless the input is empty. Loops repeatedly until a non-empty
-      # line is input.
-      def read_line
-        loop do
-          command = reader.readline("#{ui.color('knife-ssh>', :bold)} ", true)
-
-          if command.nil?
-            command = "exit"
-            puts(command)
-          else
-            command.strip!
-          end
-
-          unless command.empty?
-            return command
-          end
-        end
-      end
-
-      def reader
-        Readline
-      end
-
-      def interactive
-        puts "Connected to #{ui.list(session.servers_for.collect { |s| ui.color(s.host, :cyan) }, :inline, " and ")}"
-        puts
-        puts "To run a command on a list of servers, do:"
-        puts "  on SERVER1 SERVER2 SERVER3; COMMAND"
-        puts "  Example: on latte foamy; echo foobar"
-        puts
-        puts "To exit interactive mode, use 'quit!'"
-        puts
-        loop do
-          command = read_line
-          case command
-          when "quit!"
-            puts "Bye!"
-            break
-          when /^on (.+?); (.+)$/
-            raw_list = $1.split(" ")
-            server_list = Array.new
-            session.servers.each do |session_server|
-              server_list << session_server if raw_list.include?(session_server.host)
-            end
-            command = $2
-            ssh_command(command, session.on(*server_list))
-          else
-            ssh_command(command)
-          end
-        end
-      end
-
-      def screen
-        tf = Tempfile.new("knife-ssh-screen")
-        Chef::Util::PathHelper.home(".screenrc") do |screenrc_path|
-          if File.exist? screenrc_path
-            tf.puts("source #{screenrc_path}")
-          end
-        end
-        tf.puts("caption always '%-Lw%{= BW}%50>%n%f* %t%{-}%+Lw%<'")
-        tf.puts("hardstatus alwayslastline 'knife ssh #{@name_args[0]}'")
-        window = 0
-        session.servers_for.each do |server|
-          tf.print("screen -t \"#{server.host}\" #{window} ssh ")
-          tf.print("-i #{config[:ssh_identity_file]} ") if config[:ssh_identity_file]
-          server.user ? tf.puts("#{server.user}@#{server.host}") : tf.puts(server.host)
-          window += 1
-        end
-        tf.close
-        exec("screen -c #{tf.path}")
-      end
-
-      def tmux
-        ssh_dest = lambda do |server|
-          identity = "-i #{config[:ssh_identity_file]} " if config[:ssh_identity_file]
-          prefix = server.user ? "#{server.user}@" : ""
-          "'ssh #{identity}#{prefix}#{server.host}'"
-        end
-
-        new_window_cmds = lambda do
-          if session.servers_for.size > 1
-            [""] + session.servers_for[1..-1].map do |server|
-              if config[:tmux_split]
-                "split-window #{ssh_dest.call(server)}; tmux select-layout tiled"
-              else
-                "new-window -a -n '#{server.host}' #{ssh_dest.call(server)}"
-              end
-            end
-          else
-            []
-          end.join(" \\; ")
-        end
-
-        tmux_name = "'knife ssh #{@name_args[0].tr(':.', '=-')}'"
-        begin
-          server = session.servers_for.first
-          cmd = ["tmux new-session -d -s #{tmux_name}",
-                 "-n '#{server.host}'", ssh_dest.call(server),
-                 new_window_cmds.call].join(" ")
-          shell_out!(cmd)
-          exec("tmux attach-session -t #{tmux_name}")
-        rescue Chef::Exceptions::Exec
-        end
-      end
-
-      def macterm
-        begin
-          require "appscript"
-        rescue LoadError
-          STDERR.puts "You need the rb-appscript gem to use knife ssh macterm. `(sudo) gem install rb-appscript` to install"
-          raise
-        end
-
-        Appscript.app("/Applications/Utilities/Terminal.app").windows.first.activate
-        Appscript.app("System Events").application_processes["Terminal.app"].keystroke("n", using: :command_down)
-        term = Appscript.app("Terminal")
-        window = term.windows.first.get
-
-        (session.servers_for.size - 1).times do |i|
-          window.activate
-          Appscript.app("System Events").application_processes["Terminal.app"].keystroke("t", using: :command_down)
-        end
-
-        session.servers_for.each_with_index do |server, tab_number|
-          cmd = "unset PROMPT_COMMAND; echo -e \"\\033]0;#{server.host}\\007\"; ssh #{server.user ? "#{server.user}@#{server.host}" : server.host}"
-          Appscript.app("Terminal").do_script(cmd, in: window.tabs[tab_number + 1].get)
-        end
-      end
-
-      def cssh
-        cssh_cmd = nil
-        %w{csshX cssh}.each do |cmd|
-          begin
-            # Unix and Mac only
-            cssh_cmd = shell_out!("which #{cmd}").stdout.strip
-            break
-          rescue Mixlib::ShellOut::ShellCommandFailed
-          end
-        end
-        raise Chef::Exceptions::Exec, "no command found for cssh" unless cssh_cmd
-
-        # pass in the consolidated identity file option to cssh(X)
-        if config[:ssh_identity_file]
-          cssh_cmd << " --ssh_args '-i #{File.expand_path(config[:ssh_identity_file])}'"
-        end
-
-        session.servers_for.each do |server|
-          cssh_cmd << " #{server.user ? "#{server.user}@#{server.host}" : server.host}"
-        end
-        Chef::Log.debug("Starting cssh session with command: #{cssh_cmd}")
-        exec(cssh_cmd)
-      end
-
-      def get_stripped_unfrozen_value(value)
-        return nil if value.nil?
-        value.strip
-      end
-
-      def configure_user
-        config[:ssh_user] = get_stripped_unfrozen_value(config[:ssh_user] ||
-                             Chef::Config[:knife][:ssh_user])
-      end
-
-      # This is a bit overly complicated because of the way we want knife ssh to work with -P causing a password prompt for
-      # the user, but we have to be conscious that this code gets included in knife bootstrap and knife * server create as
-      # well.  We want to change the semantics so that the default is false and 'nil' means -P without an argument on the
-      # command line.  But the other utilities expect nil to be the default and we can't prompt in that case. So we effectively
-      # use ssh_password_ng to determine if we're coming from knife ssh or from the other utilities.  The other utilties can
-      # also be patched to use ssh_password_ng easily as long they follow the convention that the default is false.
-      def configure_password
-        if config.key?(:ssh_password_ng) && config[:ssh_password_ng].nil?
-          # If the parameter is called on the command line with no value
-          # it will set :ssh_password_ng = nil
-          # This is where we want to trigger a prompt for password
-          config[:ssh_password] = get_password
-        else
-          # if ssh_password_ng is false then it has not been set at all, and we may be in knife ec2 and still
-          # using an old config[:ssh_password].  this is backwards compatibility.  all knife cloud plugins should
-          # be updated to use ssh_password_ng with a default of false and ssh_password should be retired, (but
-          # we'll still need to use the ssh_password out of knife.rb if we find that).
-          ssh_password = config.key?(:ssh_password_ng) ? config[:ssh_password_ng] : config[:ssh_password]
-          # Otherwise, the password has either been specified on the command line,
-          # in knife.rb, or key based auth will be attempted
-          config[:ssh_password] = get_stripped_unfrozen_value(ssh_password ||
-                             Chef::Config[:knife][:ssh_password])
-        end
-      end
-
-      def configure_ssh_identity_file
-        config[:ssh_identity_file] = get_stripped_unfrozen_value(config[:ssh_identity_file] || Chef::Config[:knife][:ssh_identity_file])
-      end
-
-      def configure_ssh_gateway_identity
-        config[:ssh_gateway_identity] = get_stripped_unfrozen_value(config[:ssh_gateway_identity] || Chef::Config[:knife][:ssh_gateway_identity])
-      end
-
-      def run
-        @longest = 0
-
-        configure_user
-        configure_password
-        @password = config[:ssh_password] if config[:ssh_password]
-
-        # If a password was not given, check for SSH identity file.
-        if !@password
-          configure_ssh_identity_file
-          configure_ssh_gateway_identity
-        end
-
-        configure_gateway
-        configure_session
-
-        exit_status =
-          case @name_args[1]
-          when "interactive"
-            interactive
-          when "screen"
-            screen
-          when "tmux"
-            tmux
-          when "macterm"
-            macterm
-          when "cssh"
-            cssh
-          else
-            ssh_command(@name_args[1..-1].join(" "))
-          end
-
-        session.close
-        if exit_status != 0
-          exit exit_status
-        else
-          exit_status
-        end
-      end
-
-      private :search_nodes
-
-    end
-  end
-end
+#
+# Author:: Adam Jacob (<adam@chef.io>)
+# Copyright:: Copyright 2009-2018, Chef Software Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require "chef/mixin/shell_out"
+require "chef/knife"
+
+class Chef
+  class Knife
+    class Ssh < Knife
+
+      deps do
+        require "net/ssh"
+        require "net/ssh/multi"
+        require "readline"
+        require "chef/exceptions"
+        require "chef/search/query"
+        require "chef/util/path_helper"
+        require "mixlib/shellout"
+      end
+
+      include Chef::Mixin::ShellOut
+
+      attr_writer :password
+
+      banner "knife ssh QUERY COMMAND (options)"
+
+      option :concurrency,
+        short: "-C NUM",
+        long: "--concurrency NUM",
+        description: "The number of concurrent connections.",
+        default: nil,
+        proc: lambda { |o| o.to_i }
+
+      option :ssh_attribute,
+        short: "-a ATTR",
+        long: "--attribute ATTR",
+        description: "The attribute to use for opening the connection - default depends on the context."
+
+      option :manual,
+        short: "-m",
+        long: "--manual-list",
+        boolean: true,
+        description: "QUERY is a space separated list of servers.",
+        default: false
+
+      option :prefix_attribute,
+        long: "--prefix-attribute ATTR",
+        description: "The attribute to use for prefixing the ouput - default depends on the context."
+
+      option :ssh_user,
+        short: "-x USERNAME",
+        long: "--ssh-user USERNAME",
+        description: "The ssh username."
+
+      option :ssh_password_ng,
+        short: "-P [PASSWORD]",
+        long: "--ssh-password [PASSWORD]",
+        description: "The ssh password - will prompt if flag is specified but no password is given.",
+        # default to a value that can not be a password (boolean)
+        # so we can effectively test if this parameter was specified
+        # without a value
+        default: false
+
+      option :ssh_port,
+        short: "-p PORT",
+        long: "--ssh-port PORT",
+        description: "The ssh port.",
+        proc: Proc.new { |key| Chef::Config[:knife][:ssh_port] = key.strip }
+
+      option :ssh_timeout,
+        short: "-t SECONDS",
+        long: "--ssh-timeout SECONDS",
+        description: "The ssh connection timeout.",
+        proc: Proc.new { |key| Chef::Config[:knife][:ssh_timeout] = key.strip.to_i },
+        default: 120
+
+      option :ssh_gateway,
+        short: "-G GATEWAY",
+        long: "--ssh-gateway GATEWAY",
+        description: "The ssh gateway.",
+        proc: Proc.new { |key| Chef::Config[:knife][:ssh_gateway] = key.strip }
+
+      option :ssh_gateway_identity,
+        long: "--ssh-gateway-identity SSH_GATEWAY_IDENTITY",
+        description: "The SSH identity file used for gateway authentication."
+
+      option :forward_agent,
+        short: "-A",
+        long: "--forward-agent",
+        description: "Enable SSH agent forwarding.",
+        boolean: true
+
+      option :ssh_identity_file,
+        short: "-i IDENTITY_FILE",
+        long: "--ssh-identity-file IDENTITY_FILE",
+        description: "The SSH identity file used for authentication."
+
+      option :host_key_verify,
+        long: "--[no-]host-key-verify",
+        description: "Verify host key, enabled by default.",
+        boolean: true,
+        default: true
+
+      option :on_error,
+        short: "-e",
+        long: "--exit-on-error",
+        description: "Immediately exit if an error is encountered.",
+        boolean: true,
+        default: false
+
+      option :duplicated_fqdns,
+        long: "--duplicated-fqdns",
+        description: "Behavior if FQDNs are duplicated, ignored by default.",
+        proc: Proc.new { |key| Chef::Config[:knife][:duplicated_fqdns] = key.strip.to_sym },
+        default: :ignore
+
+      option :tmux_split,
+        long: "--tmux-split",
+        description: "Split tmux window.",
+        boolean: true,
+        default: false
+
+      def session
+        ssh_error_handler = Proc.new do |server|
+          if config[:on_error]
+            # Net::SSH::Multi magic to force exception to be re-raised.
+            throw :go, :raise
+          else
+            ui.warn "Failed to connect to #{server.host} -- #{$!.class.name}: #{$!.message}"
+            $!.backtrace.each { |l| Chef::Log.debug(l) }
+          end
+        end
+
+        @session ||= Net::SSH::Multi.start(concurrent_connections: config[:concurrency], on_error: ssh_error_handler)
+      end
+
+      def configure_gateway
+        config[:ssh_gateway] ||= Chef::Config[:knife][:ssh_gateway]
+        if config[:ssh_gateway]
+          gw_host, gw_user = config[:ssh_gateway].split("@").reverse
+          gw_host, gw_port = gw_host.split(":")
+          gw_opts = session_options(gw_host, gw_port, gw_user, gateway: true)
+          user = gw_opts.delete(:user)
+
+          begin
+            # Try to connect with a key.
+            session.via(gw_host, user, gw_opts)
+          rescue Net::SSH::AuthenticationFailed
+            prompt = "Enter the password for #{user}@#{gw_host}: "
+            gw_opts[:password] = prompt_for_password(prompt)
+            # Try again with a password.
+            session.via(gw_host, user, gw_opts)
+          end
+        end
+      end
+
+      def configure_session
+        list = config[:manual] ? @name_args[0].split(" ") : search_nodes
+        if list.length == 0
+          if @search_count == 0
+            ui.fatal("No nodes returned from search")
+          else
+            ui.fatal("#{@search_count} #{@search_count > 1 ? "nodes" : "node"} found, " +
+                     "but does not have the required attribute to establish the connection. " +
+                     "Try setting another attribute to open the connection using --attribute.")
+          end
+          exit 10
+        end
+        if %i{warn fatal}.include?(config[:duplicated_fqdns])
+          fqdns = list.map { |v| v[0] }
+          if fqdns.count != fqdns.uniq.count
+            duplicated_fqdns = fqdns.uniq
+            ui.send(config[:duplicated_fqdns],
+              "SSH #{duplicated_fqdns.count > 1 ? 'nodes are' : 'node is'} " +
+              "duplicated: #{duplicated_fqdns.join(',')}")
+            exit 10 if config[:duplicated_fqdns] == :fatal
+          end
+        end
+        session_from_list(list)
+      end
+
+      def get_prefix_attribute(item)
+        # Order of precedence for prefix
+        # 1) config value (cli or knife config)
+        # 2) nil
+        msg = "Using node attribute '%s' as the prefix: %s"
+        if item["prefix"]
+          Chef::Log.debug(sprintf(msg, config[:prefix_attribute], item["prefix"]))
+          item["prefix"]
+        else
+          nil
+        end
+      end
+
+      def get_ssh_attribute(item)
+        # Order of precedence for ssh target
+        # 1) config value (cli or knife config)
+        # 2) cloud attribute
+        # 3) fqdn
+        msg = "Using node attribute '%s' as the ssh target: %s"
+        if item["target"]
+          Chef::Log.debug(sprintf(msg, config[:ssh_attribute], item["target"]))
+          item["target"]
+        elsif !item.dig("cloud", "public_hostname").to_s.empty?
+          Chef::Log.debug(sprintf(msg, "cloud.public_hostname", item["cloud"]["public_hostname"]))
+          item["cloud"]["public_hostname"]
+        else
+          Chef::Log.debug(sprintf(msg, "fqdn", item["fqdn"]))
+          item["fqdn"]
+        end
+      end
+
+      def search_nodes
+        list = Array.new
+        query = Chef::Search::Query.new
+        required_attributes = { fqdn: ["fqdn"], cloud: ["cloud"] }
+
+        separator = ui.presenter.attribute_field_separator
+
+        if config[:prefix_attribute]
+          required_attributes[:prefix] = config[:prefix_attribute].split(separator)
+        end
+
+        if config[:ssh_attribute]
+          required_attributes[:target] = config[:ssh_attribute].split(separator)
+        end
+
+        @search_count = 0
+        query.search(:node, @name_args[0], filter_result: required_attributes, fuzz: true) do |item|
+          @search_count += 1
+          # we should skip the loop to next iteration if the item
+          # returned by the search is nil
+          next if item.nil?
+          # next if we couldn't find the specified attribute in the
+          # returned node object
+          host = get_ssh_attribute(item)
+          next if host.nil?
+          prefix = get_prefix_attribute(item)
+          ssh_port = item.dig("cloud", "public_ssh_port")
+          srv = [host, ssh_port, prefix]
+          list.push(srv)
+        end
+
+        list
+      end
+
+      # Net::SSH session options hash for global options. These should be
+      # options that will apply to the gateway connection in addition to the
+      # main one.
+      #
+      # @since 12.5.0
+      # @param host [String] Hostname for this session.
+      # @param port [String] SSH port for this session.
+      # @param user [String] Optional username for this session.
+      # @param gateway [Boolean] Flag: host or gateway key
+      # @return [Hash<Symbol, Object>]
+      def session_options(host, port, user = nil, gateway: false)
+        ssh_config = Net::SSH.configuration_for(host, true)
+        {}.tap do |opts|
+          # Chef::Config[:knife][:ssh_user] is parsed in #configure_user and written to config[:ssh_user]
+          opts[:user] = user || config[:ssh_user] || ssh_config[:user]
+          if !gateway && config[:ssh_identity_file]
+            opts[:keys] = File.expand_path(config[:ssh_identity_file])
+            opts[:keys_only] = true
+          elsif gateway && config[:ssh_gateway_identity]
+            opts[:keys] = File.expand_path(config[:ssh_gateway_identity])
+            opts[:keys_only] = true
+          elsif config[:ssh_password]
+            opts[:password] = config[:ssh_password]
+          end
+          # Don't set the keys to nil if we don't have them.
+          forward_agent = config[:forward_agent] || ssh_config[:forward_agent]
+          opts[:forward_agent] = forward_agent unless forward_agent.nil?
+          port ||= ssh_config[:port]
+          opts[:port] = port unless port.nil?
+          opts[:logger] = Chef::Log.with_child(subsystem: "net/ssh") if Chef::Log.level == :trace
+          if !config[:host_key_verify]
+            opts[:verify_host_key] = false
+            opts[:user_known_hosts_file] = "/dev/null"
+          end
+          if ssh_config[:keepalive]
+            opts[:keepalive] = true
+            opts[:keepalive_interval] = ssh_config[:keepalive_interval]
+          end
+        end
+      end
+
+      def session_from_list(list)
+        list.each do |item|
+          host, ssh_port, prefix = item
+          prefix = host unless prefix
+          Chef::Log.debug("Adding #{host}")
+          session_opts = session_options(host, ssh_port, gateway: false)
+          # Handle port overrides for the main connection.
+          session_opts[:port] = Chef::Config[:knife][:ssh_port] if Chef::Config[:knife][:ssh_port]
+          session_opts[:port] = config[:ssh_port] if config[:ssh_port]
+          # Handle connection timeout
+          session_opts[:timeout] = Chef::Config[:knife][:ssh_timeout] if Chef::Config[:knife][:ssh_timeout]
+          session_opts[:timeout] = config[:ssh_timeout] if config[:ssh_timeout]
+          # Handle session prefix
+          session_opts[:properties] = { prefix: prefix }
+          # Create the hostspec.
+          hostspec = session_opts[:user] ? "#{session_opts.delete(:user)}@#{host}" : host
+          # Connect a new session on the multi.
+          session.use(hostspec, session_opts)
+
+          @longest = prefix.length if prefix.length > @longest
+        end
+
+        session
+      end
+
+      def fixup_sudo(command)
+        command.sub(/^sudo/, "sudo -p 'knife sudo password: '")
+      end
+
+      def print_data(host, data)
+        @buffers ||= {}
+        if leftover = @buffers[host]
+          @buffers[host] = nil
+          print_data(host, leftover + data)
+        else
+          if newline_index = data.index("\n")
+            line = data.slice!(0...newline_index)
+            data.slice!(0)
+            print_line(host, line)
+            print_data(host, data)
+          else
+            @buffers[host] = data
+          end
+        end
+      end
+
+      def print_line(host, data)
+        padding = @longest - host.length
+        str = ui.color(host, :cyan) + (" " * (padding + 1)) + data
+        ui.msg(str)
+      end
+
+      def ssh_command(command, subsession = nil)
+        exit_status = 0
+        subsession ||= session
+        command = fixup_sudo(command)
+        command.force_encoding("binary") if command.respond_to?(:force_encoding)
+        subsession.open_channel do |chan|
+          if config[:on_error] && exit_status != 0
+            chan.close()
+          else
+            chan.request_pty
+            chan.exec command do |ch, success|
+              raise ArgumentError, "Cannot execute #{command}" unless success
+              ch.on_data do |ichannel, data|
+                print_data(ichannel.connection[:prefix], data)
+                if data =~ /^knife sudo password: /
+                  print_data(ichannel.connection[:prefix], "\n")
+                  ichannel.send_data("#{get_password}\n")
+                end
+              end
+              ch.on_request "exit-status" do |ichannel, data|
+                exit_status = [exit_status, data.read_long].max
+              end
+            end
+          end
+        end
+        session.loop
+        exit_status
+      end
+
+      def get_password
+        @password ||= prompt_for_password
+      end
+
+      def prompt_for_password(prompt = "Enter your password: ")
+        ui.ask(prompt) { |q| q.echo = false }
+      end
+
+      # Present the prompt and read a single line from the console. It also
+      # detects ^D and returns "exit" in that case. Adds the input to the
+      # history, unless the input is empty. Loops repeatedly until a non-empty
+      # line is input.
+      def read_line
+        loop do
+          command = reader.readline("#{ui.color('knife-ssh>', :bold)} ", true)
+
+          if command.nil?
+            command = "exit"
+            puts(command)
+          else
+            command.strip!
+          end
+
+          unless command.empty?
+            return command
+          end
+        end
+      end
+
+      def reader
+        Readline
+      end
+
+      def interactive
+        puts "Connected to #{ui.list(session.servers_for.collect { |s| ui.color(s.host, :cyan) }, :inline, " and ")}"
+        puts
+        puts "To run a command on a list of servers, do:"
+        puts "  on SERVER1 SERVER2 SERVER3; COMMAND"
+        puts "  Example: on latte foamy; echo foobar"
+        puts
+        puts "To exit interactive mode, use 'quit!'"
+        puts
+        loop do
+          command = read_line
+          case command
+          when "quit!"
+            puts "Bye!"
+            break
+          when /^on (.+?); (.+)$/
+            raw_list = $1.split(" ")
+            server_list = Array.new
+            session.servers.each do |session_server|
+              server_list << session_server if raw_list.include?(session_server.host)
+            end
+            command = $2
+            ssh_command(command, session.on(*server_list))
+          else
+            ssh_command(command)
+          end
+        end
+      end
+
+      def screen
+        tf = Tempfile.new("knife-ssh-screen")
+        Chef::Util::PathHelper.home(".screenrc") do |screenrc_path|
+          if File.exist? screenrc_path
+            tf.puts("source #{screenrc_path}")
+          end
+        end
+        tf.puts("caption always '%-Lw%{= BW}%50>%n%f* %t%{-}%+Lw%<'")
+        tf.puts("hardstatus alwayslastline 'knife ssh #{@name_args[0]}'")
+        window = 0
+        session.servers_for.each do |server|
+          tf.print("screen -t \"#{server.host}\" #{window} ssh ")
+          tf.print("-i #{config[:ssh_identity_file]} ") if config[:ssh_identity_file]
+          server.user ? tf.puts("#{server.user}@#{server.host}") : tf.puts(server.host)
+          window += 1
+        end
+        tf.close
+        exec("screen -c #{tf.path}")
+      end
+
+      def tmux
+        ssh_dest = lambda do |server|
+          identity = "-i #{config[:ssh_identity_file]} " if config[:ssh_identity_file]
+          prefix = server.user ? "#{server.user}@" : ""
+          "'ssh #{identity}#{prefix}#{server.host}'"
+        end
+
+        new_window_cmds = lambda do
+          if session.servers_for.size > 1
+            [""] + session.servers_for[1..-1].map do |server|
+              if config[:tmux_split]
+                "split-window #{ssh_dest.call(server)}; tmux select-layout tiled"
+              else
+                "new-window -a -n '#{server.host}' #{ssh_dest.call(server)}"
+              end
+            end
+          else
+            []
+          end.join(" \\; ")
+        end
+
+        tmux_name = "'knife ssh #{@name_args[0].tr(':.', '=-')}'"
+        begin
+          server = session.servers_for.first
+          cmd = ["tmux new-session -d -s #{tmux_name}",
+                 "-n '#{server.host}'", ssh_dest.call(server),
+                 new_window_cmds.call].join(" ")
+          shell_out!(cmd)
+          exec("tmux attach-session -t #{tmux_name}")
+        rescue Chef::Exceptions::Exec
+        end
+      end
+
+      def macterm
+        begin
+          require "appscript"
+        rescue LoadError
+          STDERR.puts "You need the rb-appscript gem to use knife ssh macterm. `(sudo) gem install rb-appscript` to install"
+          raise
+        end
+
+        Appscript.app("/Applications/Utilities/Terminal.app").windows.first.activate
+        Appscript.app("System Events").application_processes["Terminal.app"].keystroke("n", using: :command_down)
+        term = Appscript.app("Terminal")
+        window = term.windows.first.get
+
+        (session.servers_for.size - 1).times do |i|
+          window.activate
+          Appscript.app("System Events").application_processes["Terminal.app"].keystroke("t", using: :command_down)
+        end
+
+        session.servers_for.each_with_index do |server, tab_number|
+          cmd = "unset PROMPT_COMMAND; echo -e \"\\033]0;#{server.host}\\007\"; ssh #{server.user ? "#{server.user}@#{server.host}" : server.host}"
+          Appscript.app("Terminal").do_script(cmd, in: window.tabs[tab_number + 1].get)
+        end
+      end
+
+      def cssh
+        cssh_cmd = nil
+        %w{csshX cssh}.each do |cmd|
+          begin
+            # Unix and Mac only
+            cssh_cmd = shell_out!("which #{cmd}").stdout.strip
+            break
+          rescue Mixlib::ShellOut::ShellCommandFailed
+          end
+        end
+        raise Chef::Exceptions::Exec, "no command found for cssh" unless cssh_cmd
+
+        # pass in the consolidated identity file option to cssh(X)
+        if config[:ssh_identity_file]
+          cssh_cmd << " --ssh_args '-i #{File.expand_path(config[:ssh_identity_file])}'"
+        end
+
+        session.servers_for.each do |server|
+          cssh_cmd << " #{server.user ? "#{server.user}@#{server.host}" : server.host}"
+        end
+        Chef::Log.debug("Starting cssh session with command: #{cssh_cmd}")
+        exec(cssh_cmd)
+      end
+
+      def get_stripped_unfrozen_value(value)
+        return nil if value.nil?
+        value.strip
+      end
+
+      def configure_user
+        config[:ssh_user] = get_stripped_unfrozen_value(config[:ssh_user] ||
+                             Chef::Config[:knife][:ssh_user])
+      end
+
+      # This is a bit overly complicated because of the way we want knife ssh to work with -P causing a password prompt for
+      # the user, but we have to be conscious that this code gets included in knife bootstrap and knife * server create as
+      # well.  We want to change the semantics so that the default is false and 'nil' means -P without an argument on the
+      # command line.  But the other utilities expect nil to be the default and we can't prompt in that case. So we effectively
+      # use ssh_password_ng to determine if we're coming from knife ssh or from the other utilities.  The other utilties can
+      # also be patched to use ssh_password_ng easily as long they follow the convention that the default is false.
+      def configure_password
+        if config.key?(:ssh_password_ng) && config[:ssh_password_ng].nil?
+          # If the parameter is called on the command line with no value
+          # it will set :ssh_password_ng = nil
+          # This is where we want to trigger a prompt for password
+          config[:ssh_password] = get_password
+        else
+          # if ssh_password_ng is false then it has not been set at all, and we may be in knife ec2 and still
+          # using an old config[:ssh_password].  this is backwards compatibility.  all knife cloud plugins should
+          # be updated to use ssh_password_ng with a default of false and ssh_password should be retired, (but
+          # we'll still need to use the ssh_password out of knife.rb if we find that).
+          ssh_password = config.key?(:ssh_password_ng) ? config[:ssh_password_ng] : config[:ssh_password]
+          # Otherwise, the password has either been specified on the command line,
+          # in knife.rb, or key based auth will be attempted
+          config[:ssh_password] = get_stripped_unfrozen_value(ssh_password ||
+                             Chef::Config[:knife][:ssh_password])
+        end
+      end
+
+      def configure_ssh_identity_file
+        config[:ssh_identity_file] = get_stripped_unfrozen_value(config[:ssh_identity_file] || Chef::Config[:knife][:ssh_identity_file])
+      end
+
+      def configure_ssh_gateway_identity
+        config[:ssh_gateway_identity] = get_stripped_unfrozen_value(config[:ssh_gateway_identity] || Chef::Config[:knife][:ssh_gateway_identity])
+      end
+
+      def run
+        @longest = 0
+
+        configure_user
+        configure_password
+        @password = config[:ssh_password] if config[:ssh_password]
+
+        # If a password was not given, check for SSH identity file.
+        if !@password
+          configure_ssh_identity_file
+          configure_ssh_gateway_identity
+        end
+
+        configure_gateway
+        configure_session
+
+        exit_status =
+          case @name_args[1]
+          when "interactive"
+            interactive
+          when "screen"
+            screen
+          when "tmux"
+            tmux
+          when "macterm"
+            macterm
+          when "cssh"
+            cssh
+          else
+            ssh_command(@name_args[1..-1].join(" "))
+          end
+
+        session.close
+        if exit_status != 0
+          exit exit_status
+        else
+          exit_status
+        end
+      end
+
+      private :search_nodes
+
+    end
+  end
+end