chef 10.28.2-x86-mingw32

data/lib/chef/provider/service/arch.rb

@@ -0,0 +1,113 @@
+#
+# Author:: Jan Zimmek (<jan.zimmek@web.de>)
+# Copyright:: Copyright (c) 2010 Jan Zimmek
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/provider/service/init'
+require 'chef/mixin/command'
+
+class Chef::Provider::Service::Arch < Chef::Provider::Service::Init
+
+  def initialize(new_resource, run_context)
+    super
+    @init_command = "/etc/rc.d/#{@new_resource.service_name}"
+  end
+
+  def load_current_resource
+    raise Chef::Exceptions::Service, "Could not find /etc/rc.conf"  unless ::File.exists?("/etc/rc.conf")
+    raise Chef::Exceptions::Service, "No DAEMONS found in /etc/rc.conf"  unless ::File.read("/etc/rc.conf").match(/DAEMONS=\((.*)\)/m)
+    super
+
+    @current_resource.enabled(daemons.include?(@current_resource.service_name))
+    @current_resource
+  end
+
+  # Get list of all daemons from the file '/etc/rc.conf'.
+  # Mutiple lines and background form are supported. Example:
+  #   DAEMONS=(\
+  #     foobar \
+  #     @example \
+  #     !net \
+  #   )
+  def daemons
+    entries = []
+    if ::File.read("/etc/rc.conf").match(/DAEMONS=\((.*)\)/m)
+      entries += $1.gsub(/\\?[\r\n]/, ' ').gsub(/# *[^ ]+/,' ').split(' ') if $1.length > 0
+    end
+
+    yield(entries) if block_given?
+
+    entries
+  end
+
+  # FIXME: Multiple entries of DAEMONS will cause very bad results :)
+  def update_daemons(entries)
+    content = ::File.read("/etc/rc.conf").gsub(/DAEMONS=\((.*)\)/m, "DAEMONS=(#{entries.join(' ')})")
+    ::File.open("/etc/rc.conf", "w") do |f|
+      f.write(content)
+    end
+  end
+
+  def enable_service()
+    new_daemons = []
+    entries = daemons
+
+    if entries.include?(new_resource.service_name) or entries.include?("@#{new_resource.service_name}")
+      # exists and already enabled (or already enabled as a background service)
+      # new_daemons += entries
+    else
+      if entries.include?("!#{new_resource.service_name}")
+        # exists but disabled
+        entries.each do |daemon|
+          if daemon == "!#{new_resource.service_name}"
+            new_daemons << new_resource.service_name
+          else
+            new_daemons << daemon
+          end
+        end
+      else
+        # does not exist
+        new_daemons += entries
+        new_daemons << new_resource.service_name
+      end
+      update_daemons(new_daemons)
+    end
+  end
+
+  def disable_service()
+    new_daemons = []
+    entries = daemons
+
+    if entries.include?("!#{new_resource.service_name}")
+      # exists and disabled
+      # new_daemons += entries
+    else
+      if entries.include?(new_resource.service_name) or entries.include?("@#{new_resource.service_name}")
+        # exists but enabled (or enabled as a back-ground service)
+        # FIXME: Does arch support !@foobar ?
+        entries.each do |daemon|
+          if [new_resource.service_name, "@#{new_resource.service_name}"].include?(daemon)
+            new_daemons << "!#{new_resource.service_name}"
+          else
+            new_daemons << daemon
+          end
+        end
+      end
+      update_daemons(new_daemons)
+    end
+  end
+
+end

data/lib/chef/provider/service/debian.rb

@@ -0,0 +1,152 @@
+#
+# Author:: AJ Christensen (<aj@hjksolutions.com>)
+# Copyright:: Copyright (c) 2008 Opscode, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/provider/service'
+require 'chef/provider/service/init'
+require 'chef/mixin/command'
+
+class Chef
+  class Provider
+    class Service
+      class Debian < Chef::Provider::Service::Init
+        UPDATE_RC_D_ENABLED_MATCHES = /\/rc[\dS].d\/S|not installed/i
+        UPDATE_RC_D_PRIORITIES = /\/rc([\dS]).d\/([SK])(\d\d)/i
+
+        def load_current_resource
+          super
+          @priority_success = true
+          @rcd_status = nil
+          @current_resource.priority(get_priority)
+          @current_resource.enabled(service_currently_enabled?(@current_resource.priority))
+          @current_resource
+        end
+
+        def define_resource_requirements
+          # do not call super here, inherit only shared_requirements
+          shared_resource_requirements
+          requirements.assert(:all_actions) do |a|
+            update_rcd = "/usr/sbin/update-rc.d"
+            a.assertion { ::File.exists? update_rcd } 
+            a.failure_message Chef::Exceptions::Service, "#{update_rcd} does not exist!"
+            # no whyrun recovery - this is a base system component of debian
+            # distros and must be present 
+          end 
+
+          requirements.assert(:all_actions) do |a|
+            a.assertion { @priority_success } 
+            a.failure_message  Chef::Exceptions::Service, "/usr/sbin/update-rc.d -n -f #{@current_resource.service_name} failed - #{@rcd_status.inspect}"
+            # This can happen if the service is not yet installed,so we'll fake it. 
+            a.whyrun ["Unable to determine priority of service, assuming service would have been correctly installed earlier in the run.", 
+                      "Assigning temporary priorities to continue.",
+                      "If this service is not properly installed prior to this point, this will fail."] do
+              temp_priorities = {"6"=>[:stop, "20"],
+                "0"=>[:stop, "20"],
+                "1"=>[:stop, "20"],
+                "2"=>[:start, "20"],
+                "3"=>[:start, "20"],
+                "4"=>[:start, "20"],
+                "5"=>[:start, "20"]}
+              @current_resource.priority(temp_priorities)
+            end
+          end
+        end
+
+        def get_priority
+          priority = {}
+
+          @rcd_status = popen4("/usr/sbin/update-rc.d -n -f #{@current_resource.service_name} remove") do |pid, stdin, stdout, stderr|
+
+            [stdout, stderr].each do |iop|
+              iop.each_line do |line|
+                if UPDATE_RC_D_PRIORITIES =~ line
+                  # priority[runlevel] = [ S|K, priority ] 
+                  # S = Start, K = Kill
+                  # debian runlevels: 0 Halt, 1 Singleuser, 2 Multiuser, 3-5 == 2, 6 Reboot
+                  priority[$1] = [($2 == "S" ? :start : :stop), $3]
+                end
+                if line =~ UPDATE_RC_D_ENABLED_MATCHES
+                  enabled = true
+                end
+              end
+            end
+          end
+
+          unless @rcd_status.exitstatus == 0
+            @priority_success = false
+          end
+          priority
+        end
+
+        def service_currently_enabled?(priority)
+          enabled = false
+          priority.each { |runlevel, arguments|
+            Chef::Log.debug("#{@new_resource} runlevel #{runlevel}, action #{arguments[0]}, priority #{arguments[1]}")
+            # if we are in a update-rc.d default startup runlevel && we start in this runlevel
+            if (2..5).include?(runlevel.to_i) && arguments[0] == :start
+              enabled = true
+            end
+          }
+
+          enabled
+        end
+
+        def enable_service()
+          if @new_resource.priority.is_a? Integer
+            run_command(:command => "/usr/sbin/update-rc.d -f #{@new_resource.service_name} remove")
+            run_command(:command => "/usr/sbin/update-rc.d #{@new_resource.service_name} defaults #{@new_resource.priority} #{100 - @new_resource.priority}")
+          elsif @new_resource.priority.is_a? Hash
+            # we call the same command regardless of we're enabling or disabling  
+            # users passing a Hash are responsible for setting their own start priorities
+            set_priority()
+          else # No priority, go with update-rc.d defaults
+            run_command(:command => "/usr/sbin/update-rc.d -f #{@new_resource.service_name} remove")
+            run_command(:command => "/usr/sbin/update-rc.d #{@new_resource.service_name} defaults")
+          end
+
+        end
+
+        def disable_service()
+          if @new_resource.priority.is_a? Integer
+            # Stop processes in reverse order of start using '100 - start_priority'
+            run_command(:command => "/usr/sbin/update-rc.d -f #{@new_resource.service_name} remove")
+            run_command(:command => "/usr/sbin/update-rc.d -f #{@new_resource.service_name} stop #{100 - @new_resource.priority} 2 3 4 5 .")
+          elsif @new_resource.priority.is_a? Hash
+            # we call the same command regardless of we're enabling or disabling  
+            # users passing a Hash are responsible for setting their own stop priorities
+            set_priority()
+          else 
+            # no priority, using '100 - 20 (update-rc.d default)' to stop in reverse order of start
+            run_command(:command => "/usr/sbin/update-rc.d -f #{@new_resource.service_name} remove")
+            run_command(:command => "/usr/sbin/update-rc.d -f #{@new_resource.service_name} stop 80 2 3 4 5 .")
+          end
+        end
+
+        def set_priority()
+          args = ""
+          @new_resource.priority.each do |level, o|
+            action = o[0]
+            priority = o[1]
+            args += "#{action} #{priority} #{level} . "
+          end
+          run_command(:command => "/usr/sbin/update-rc.d -f #{@new_resource.service_name} remove")
+          run_command(:command => "/usr/sbin/update-rc.d #{@new_resource.service_name} #{args}")
+        end
+      end
+    end
+  end
+end

data/lib/chef/provider/service/freebsd.rb

@@ -0,0 +1,175 @@
+#
+# Author:: Bryan McLellan (btm@loftninjas.org)
+# Copyright:: Copyright (c) 2009 Bryan McLellan
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/mixin/shell_out'
+require 'chef/provider/service'
+require 'chef/mixin/command'
+
+class Chef
+  class Provider
+    class Service
+      class Freebsd < Chef::Provider::Service::Init
+
+        include Chef::Mixin::ShellOut
+
+        def load_current_resource
+          @current_resource = Chef::Resource::Service.new(@new_resource.name)
+          @current_resource.service_name(@new_resource.service_name)
+          @rcd_script_found = true
+          @enabled_state_found = false
+          # Determine if we're talking about /etc/rc.d or /usr/local/etc/rc.d
+          if ::File.exists?("/etc/rc.d/#{current_resource.service_name}")
+            @init_command = "/etc/rc.d/#{current_resource.service_name}"
+          elsif ::File.exists?("/usr/local/etc/rc.d/#{current_resource.service_name}")
+            @init_command = "/usr/local/etc/rc.d/#{current_resource.service_name}"
+          else
+            @rcd_script_found = false 
+            return
+          end
+          Chef::Log.debug("#{@current_resource} found at #{@init_command}")
+          determine_current_status!
+          # Default to disabled if the service doesn't currently exist
+          # at all 
+          var_name = service_enable_variable_name
+          if ::File.exists?("/etc/rc.conf") && var_name
+            read_rc_conf.each do |line|
+              case line
+              when /#{Regexp.escape(var_name)}="(\w+)"/
+                @enabled_state_found = true
+                if $1 =~ /[Yy][Ee][Ss]/
+                  @current_resource.enabled true
+                elsif $1 =~ /[Nn][Oo][Nn]?[Oo]?[Nn]?[Ee]?/
+                  @current_resource.enabled false
+                end
+              end
+            end
+          end
+          unless @current_resource.enabled
+            Chef::Log.debug("#{@new_resource.name} enable/disable state unknown")
+            @current_resource.enabled false
+          end
+
+          @current_resource
+        end
+
+        def define_resource_requirements
+          shared_resource_requirements
+          requirements.assert(:start, :enable, :reload, :restart) do |a|
+            a.assertion { @rcd_script_found } 
+            a.failure_message Chef::Exceptions::Service, "#{@new_resource}: unable to locate the rc.d script"
+          end
+
+          requirements.assert(:all_actions) do |a| 
+            a.assertion { @enabled_state_found }  
+            # for consistentcy with original behavior, this will not fail in non-whyrun mode; 
+            # rather it will silently set enabled state=>false
+            a.whyrun "Unable to determine enabled/disabled state, assuming this will be correct for an actual run.  Assuming disabled." 
+          end
+
+          requirements.assert(:start, :enable, :reload, :restart) do |a|
+            a.assertion { @rcd_script_found && service_enable_variable_name != nil } 
+            a.failure_message Chef::Exceptions::Service, "Could not find the service name in #{@init_command} and rcvar"
+            # No recovery in whyrun mode - the init file is present but not correct.
+          end
+        end
+
+        def start_service
+          if @new_resource.start_command
+            super
+          else
+            shell_out!("#{@init_command} faststart")
+          end
+        end
+
+        def stop_service
+          if @new_resource.stop_command
+            super
+          else
+            shell_out!("#{@init_command} faststop")
+          end
+        end
+
+        def restart_service
+          if @new_resource.restart_command
+
+            super
+          elsif @new_resource.supports[:restart]
+            shell_out!("#{@init_command} fastrestart")
+          else
+            stop_service
+            sleep 1
+            start_service
+          end
+        end
+
+        def read_rc_conf
+          ::File.open("/etc/rc.conf", 'r') { |file| file.readlines }
+        end
+
+        def write_rc_conf(lines)
+          ::File.open("/etc/rc.conf", 'w') do |file|
+            lines.each { |line| file.puts(line) }
+          end
+        end
+
+        # The variable name used in /etc/rc.conf for enabling this service
+        def service_enable_variable_name
+          # Look for name="foo" in the shell script @init_command. Use this for determining the variable name in /etc/rc.conf
+          # corresponding to this service
+          # For example: to enable the service mysql-server with the init command /usr/local/etc/rc.d/mysql-server, you need
+          # to set mysql_enable="YES" in /etc/rc.conf$
+          if @rcd_script_found   
+            ::File.open(@init_command) do |rcscript|
+              rcscript.each_line do |line|
+                if line =~ /^name="?(\w+)"?/
+                  return $1 + "_enable"
+                end
+              end
+            end
+            # some scripts support multiple instances through symlinks such as openvpn.
+            # We should get the service name from rcvar.
+            Chef::Log.debug("name=\"service\" not found at #{@init_command}. falling back to rcvar")
+            sn = shell_out!("#{@init_command} rcvar").stdout[/(\w+_enable)=/, 1]
+            return sn
+          end
+          # Fallback allows us to keep running in whyrun mode when
+          # the script does not exist.
+          @new_resource.service_name
+        end
+
+        def set_service_enable(value)
+          lines = read_rc_conf
+          # Remove line that set the old value
+          lines.delete_if { |line| line =~ /#{Regexp.escape(service_enable_variable_name)}/ }
+          # And append the line that sets the new value at the end
+          lines << "#{service_enable_variable_name}=\"#{value}\""
+          write_rc_conf(lines)
+        end
+
+        def enable_service()
+          set_service_enable("YES") unless @current_resource.enabled
+        end
+
+        def disable_service()
+          set_service_enable("NO") if @current_resource.enabled
+        end
+
+      end
+    end
+  end
+end

data/lib/chef/provider/service/gentoo.rb

@@ -0,0 +1,67 @@
+#
+# Author:: Lee Jensen (<ljensen@engineyard.com>)
+# Author:: AJ Christensen (<aj@opscode.com>)
+# Copyright:: Copyright (c) 2008 Opscode, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/provider/service'
+require 'chef/mixin/command'
+
+class Chef::Provider::Service::Gentoo < Chef::Provider::Service::Init
+  def load_current_resource
+
+    @new_resource.supports[:status] = true
+    @new_resource.supports[:restart] = true
+    @found_script = false
+    super
+
+    @current_resource.enabled(
+      Dir.glob("/etc/runlevels/**/#{@current_resource.service_name}").any? do |file|
+        @found_script = true
+        exists = ::File.exists? file
+        readable = ::File.readable? file
+        Chef::Log.debug "#{@new_resource} exists: #{exists}, readable: #{readable}"
+        exists and readable
+      end
+    )
+    Chef::Log.debug "#{@new_resource} enabled: #{@current_resource.enabled}"
+
+    @current_resource
+  end
+
+  def define_resource_requirements
+    requirements.assert(:all_actions) do |a|
+      a.assertion { ::File.exists?("/sbin/rc-update") } 
+      a.failure_message Chef::Exceptions::Service, "/sbin/rc-update does not exist"
+      # no whyrun recovery -t his is a core component whose presence is
+      # unlikely to be affected by what we do in the course of a chef run
+    end
+
+    requirements.assert(:all_actions) do |a|
+      a.assertion { @found_script }
+      # No failure, just informational output from whyrun 
+      a.whyrun "Could not find service #{@new_resource.service_name} under any runlevel"
+    end
+  end
+  
+  def enable_service()
+    run_command(:command => "/sbin/rc-update add #{@new_resource.service_name} default")
+  end
+  
+  def disable_service()
+    run_command(:command => "/sbin/rc-update del #{@new_resource.service_name} default")
+  end
+end