chef 10.28.2-x86-mingw32

data/distro/common/markdown/man1/shef.mkd

@@ -0,0 +1,189 @@
+shef(1) -- Interactive Chef Console
+========================================
+
+## SYNOPSIS
+
+__shef__ [_named configuration_] _(options)_
+
+  * `-S`, `--server CHEF_SERVER_URL`:
+    The chef server URL
+  * `-z`, `--client`:
+    chef-client mode
+  * `-c`, `--config CONFIG`:
+    The configuration file to use
+  * `-j`, `--json-attributes JSON_ATTRIBS`:
+    Load attributes from a JSON file or URL
+  * `-l`, `--log-level LOG_LEVEL`:
+    Set the logging level
+  * `-s`, `--solo`:
+    chef-solo shef session
+  * `-a`, `--standalone`:
+    standalone shef session
+  * `-v`, `--version`:
+    Show chef version
+  * `-h`, `--help`:
+    Show command options
+
+When no --config option is specified, shef attempts to load a default configuration file:
+
+* If a _named configuration_ is given, shef will load ~/.chef/_named
+  configuration_/shef.rb
+* If no _named configuration_ is given shef will load ~/.chef/shef.rb if it exists
+* Shef falls back to loading /etc/chef/client.rb or /etc/chef/solo.rb if -z or
+  -s options are given and no shef.rb can be found.
+* The --config option takes precedence over implicit configuration
+  paths.
+
+## DESCRIPTION
+
+`shef` is an irb(1) (interactive ruby) session customized for Chef.
+`shef` serves two primary functions: it provides a means to
+interact with a Chef Server interactively using a convenient DSL; it
+allows you to define and run Chef recipes interactively.
+
+## SYNTAX
+Shef uses irb's subsession feature to provide multiple modes of
+interaction. In addition to the primary mode which is entered on start,
+`recipe` and `attributes` modes are available.
+
+## PRIMARY MODE
+The following commands are available in the primary
+session:
+
+  * `help`:
+    Prints a list of available commands
+  * `version`:
+    Prints the Chef version
+  * `recipe`:
+    Switches to `recipe` mode
+  * `attributes`:
+    Switches to `attributes` mode
+  * `run_chef`:
+    Initiates a chef run
+  * `reset`:
+    reinitializes shef
+  * `echo :on|:off`:
+    Turns irb's echo function on or off. Echo is _on_ by default.
+  * `tracing :on|:off`:
+    Turns irb's function tracing feature on or off. Tracing is extremely
+    verbose and expected to be of interest primarily to developers.
+  * `node`:
+    Returns the _node_ object for the current host. See knife-node(1)
+    for more information about nodes.
+  * `ohai`:
+    Prints the attributes of _node_
+
+In addition to these commands, shef provides a DSL for accessing data on
+the Chef Server. When working with remote data in shef, you chain method
+calls in the form _object type_._operation_, where _object type_ is in
+plural form. The following object types are available:
+
+  * `nodes`
+  * `roles`
+  * `data_bags`
+  * `clients`
+  * `cookbooks`
+
+For each _object type_ the following operations are available:
+
+  * _object type_.all(_&block_):
+    Loads all items from the server. If the optional code _block_ is
+    given, each item will be passed to the block and the results
+    returned, similar to ruby's `Enumerable#map` method.
+  * _object type_.show(_object name_):
+    Aliased as _object type_.load
+
+    Loads the singular item identified by _object name_.
+  * _object type_.search(_query_, _&block_):
+    Aliased as _object type_.find
+
+    Runs a search against the server and returns the matching items. If
+    the optional code _block_ is given each item will be passed to the
+    block and the results returned.
+
+    The _query_ may be a Solr/Lucene format query given as a String, or
+    a Hash of conditions. If a Hash is given, the options will be ANDed
+    together. To join conditions with OR, use negative queries, or any
+    advanced search syntax, you must provide give the query in String
+    form.
+  * _object type_.transform(:all|_query_, _&block_):
+    Aliased as _object type_.bulk_edit
+
+    Bulk edit objects by processing them with the (required) code _block_.
+    You can edit all objects of the given type by passing the Symbol
+    `:all` as the argument, or only a subset by passing a _query_ as the
+    argument. The _query_ is evaluated in the same way as with
+    __search__.
+
+    The return value of the code _block_ is used to alter the behavior
+    of `transform`. If the value returned from the block is `nil` or
+    `false`, the object will not be saved. Otherwise, the object is
+    saved after being passed to the block. This behavior can be
+    exploited to create a dry run to test a data transformation.
+
+## RECIPE MODE
+Recipe mode implements Chef's recipe DSL. Exhaustively documenting this
+DSL is outside the scope of this document. See the following pages in
+the Chef documentation for more information:
+
+  * <http://wiki.opscode.com/display/chef/Resources>
+  * <http://wiki.opscode.com/display/chef/Recipes>
+
+Once you have defined resources in the recipe, you can trigger a
+convergence run via `run_chef`
+
+## EXAMPLES
+
+* A "Hello World" interactive recipe
+
+  chef > recipe  
+  chef:recipe > echo :off  
+  chef:recipe > file "/tmp/hello\_world"  
+  chef:recipe > run\_chef  
+  [Sat, 09 Apr 2011 08:56:56 -0700] INFO: Processing file[/tmp/hello\_world] action create ((irb#1) line 2)  
+  [Sat, 09 Apr 2011 08:56:56 -0700] INFO: file[/tmp/hello\_world] created file /tmp/hello\_world  
+  chef:recipe > pp ls '/tmp'  
+  [".",  
+  "..",  
+  "hello\_world"]  
+
+* Search for _nodes_ by role, and print their IP addresses
+
+  chef > nodes.find(:roles => 'monitoring-server') {|n| n[:ipaddress] }  
+  => ["10.254.199.5"]  
+
+* Remove the role _obsolete_ from every node in the system
+
+  chef > nodes.transform(:all) {|n| n.run\_list.delete('role[obsolete]') }  
+   => [node[chef098b2.opschef.com], node[ree-woot], node[graphite-dev], node[fluke.localdomain], node[ghost.local], node[kallistec]]  
+
+
+## BUGS
+The name `shef` is clever in print but is confusing when spoken aloud.
+Pronouncing `shef` as `chef console` is an imperfect workaround.
+
+`shef` often does not perfectly replicate the context in which
+chef-client(8) configures a host, which may lead to discrepancies in
+observed behavior.
+
+`shef` has to duplicate much code from chef-client's internal libraries
+and may become out of sync with the behavior of those libraries.
+
+## SEE ALSO
+  chef-client(8) knife(1)
+  <http://wiki.opscode.com/display/chef/Shef>
+
+## AUTHOR
+   Chef was written by Adam Jacob <adam@opscode.com> with many
+   contributions from the community. Shef was written by Daniel DeLeo.
+
+## DOCUMENTATION
+   This manual page was written by Daniel DeLeo <dan@opscode.com>.
+   Permission is granted to copy, distribute and / or modify this
+   document under the terms of the Apache 2.0 License.
+
+## CHEF
+   Shef is distributed with Chef. <http://wiki.opscode.com/display/chef/Home>
+
+
+

data/distro/common/markdown/man8/chef-client.mkd

@@ -0,0 +1,74 @@
+chef-client(8) -- Runs a client node connecting to a chef-server.
+========================================
+
+## SYNOPSIS
+
+__chef-client__ _(options)_
+
+  * `-S`, `--server CHEFSERVERURL`:
+    The chef server URL
+  * `-c`, `--config CONFIG`:
+    The configuration file to use
+  * `-d`, `--daemonize`:
+    Daemonize the process
+  * `-g`, `--group GROUP`:
+    Group to set privilege to
+  * `-i`, `--interval SECONDS`:
+    Run chef-client periodically, in seconds
+  * `-j`, `--json-attributes JSON_ATTRIBS`:
+    Load attributes from a JSON file or URL
+  * `-E`, `--environment ENVIRONMENT`:
+    Set the Chef Environment on the node
+  * `-l`, `--log_level LEVEL`:
+    Set the log level (debug, info, warn, error, fatal)
+  * `-L`, `--logfile LOGLOCATION`:
+    Set the log file location, defaults to STDOUT - recommended for
+    daemonizing
+  * `-N`, `--node-name NODE_NAME`:
+    The node name for this client
+  * `-o`, `--override-runlist`:
+    Replace current run list with specified items
+  * `-K`, `--validation_key KEY_FILE`:
+    Set the validation key file location, used for registering new clients
+  * `-k`, `--client_key KEY_FILE`:
+    Set the client key file location
+  * `-s`, `--splay SECONDS`:
+    The splay time for running at intervals, in seconds
+  * `-u`, `--user USER`:
+    User to set privilege to
+  * `-P`, `--pid PIDFILE`:
+    Set the PID file location, defaults to /tmp/chef-client.pid
+  * `--once`:
+    Cancel any interval or splay options, run chef once and exit
+  * `-v`, `--version`:
+    Show chef version
+  * `-h`, `--help`:
+    Show this message
+
+## DESCRIPTION
+
+The Chef Client is where almost all of the work in Chef is done. It
+communicates with the Chef Server via REST, authenticates via Signed
+Header Authentication, and compiles and executes Cookbooks.
+
+A Chef Client does work on behalf of a Node. A single Chef Client can
+run recipes for multiple Nodes.
+
+Clients are where all the action happens - the Chef Server and Chef Expander
+are largely services that exist only to provide the Client with information.
+
+## SEE ALSO
+
+Full  documentation  for  Chef  and  chef-client is located on the Chef
+wiki, http://wiki.opscode.com/display/chef/Home.
+
+## AUTHOR
+
+Chef was written by Adam Jacob <adam@ospcode.com> of Opscode
+(http://www.opscode.com),  with contributions from the community.  This
+manual page was written by Joshua Timberman  <joshua@opscode.com>  with
+help2man.  Permission  is  granted  to copy, distribute and / or modify
+this document under the terms of the Apache 2.0 License.
+
+On Debian systems, the complete text of the Apache 2.0 License  can  be
+found in /usr/share/common-licenses/Apache-2.0.

data/distro/common/markdown/man8/chef-expander.mkd

@@ -0,0 +1,82 @@
+chef-expander(8) -- fetches messages from RabbitMQ, processes, and loads into chef-solr
+========================================
+
+## SYNOPSIS
+
+__chef-expander__ _(options)_
+
+  * `-c`, `--config CONFIG_FILE`:
+    a configuration file to use
+  * `-i`, `--index INDEX`:
+    the slot this node will occupy in the ring
+  * `-n`, `--node-count NUMBER`:
+    the number of nodes in the ring
+  * `-l`, `--log-level LOG_LEVEL`:
+    set the log level
+  * `-L`, `--logfile LOG_LOCATION`:
+    Logfile to use
+  * `-d`, `--daemonize`:
+    fork into the background
+  * `-P`, `--pid PIDFILE`:
+    PID file
+  * `-h`, `--help`:
+    show help message
+  * `-v`, `--version`:
+    show the version and exit
+
+## DESCRIPTION
+
+Chef Expander fetches messages from RabbitMQ, processes them into the
+correct format to be loaded into Solr and loads them into Solr.
+
+__Running Chef Expander__
+
+Chef Expander is designed for clustered operation, though small
+installations will only need one worker process. To run Chef
+Expander with one worker process, run chef-expander -n 1.
+You will then have a master and worker process, which looks like
+this in ps:
+
+    your-shell> ps aux|grep expander
+    you   52110   0.1  0.7  2515476  62748 s003  S+    3:49PM   0:00.80 chef-expander worker #1 (vnodes 0-1023)
+    you   52108   0.1  0.5  2492880  41696 s003  S+    3:49PM   0:00.91 ruby bin/chef-expander -n 1
+
+Workers are single threaded and therefore cannot use more than 100%
+of a single CPU. If you find that your queues are getting backlogged,
+increase the number of workers
+
+__Design__
+
+Chef Expander uses 1024 queues (called vnodes in some places) to allow
+you to scale the number of Chef Expander workers to meet the needs of
+your infrastructure. When objects are saved in the API server, they are
+added to queues based on their database IDs. These queues can be assigned
+to different Chef Expander workers to distribute the load of processing
+the index updates.
+
+__Chef Expander Operation and Troubleshooting__
+
+Chef Expander includes chef-expanderctl, a management program that allows
+you to get status information or change the logging verbosity (without
+restarting).
+
+See __chef-expanderctl__(8) for details.
+
+## SEE ALSO
+
+__chef-expanderctl__(8)
+__chef-solr__(8)
+
+Full documentation for Chef and chef-server is located on the Chef
+wiki, http://wiki.opscode.com/display/chef/Home.
+
+## AUTHOR
+
+Chef was written by Adam Jacob <adam@ospcode.com> of Opscode
+(http://www.opscode.com),  with contributions from the community. This
+manual page was created by Nuo Yan <nuo@opscode.com>. Permission is
+granted to copy, distribute and / or modify this document under the
+terms of the Apache 2.0 License.
+
+On Debian systems, the complete text of the Apache 2.0 License  can  be
+found in /usr/share/common-licenses/Apache-2.0.

data/distro/common/markdown/man8/chef-expanderctl.mkd

@@ -0,0 +1,58 @@
+chef-expanderctl(8) -- management program for chef-expander
+========================================
+
+## SYNOPSIS
+
+__chef-expanderctl__ _COMMAND_
+
+__Commands:__
+
+  * `help`:
+    Show help message
+  * `queue-depth`:
+    display the aggregate queue backlog
+  * `queue-status`:
+    show the backlog and consumer count for each vnode queue
+  * `node-status`:
+    show the status of the nodes in the cluster
+  * `log-level`:
+    sets the log level of all nodes in the cluster
+
+## DESCRIPTION
+
+Chef-expanderctl is a management program that allows
+you to get status information or change the logging
+verbosity (without restarting). chef-expanderctl has
+the following commands:
+
+* __chef-expanderctl help__
+prints usage.
+* __chef-expanderctl queue-depth__
+Shows the total number of messages in the queues.
+* __chef-expanderctl queue-status__
+Show the number of messages in each queue. This is mainly of use when
+debugging a Chef Expander cluster.
+* __chef-expanderctl log-level LEVEL__
+Sets the log level on a running Chef Expander or cluster.
+If you suspect that a worker process is stuck, as long as you are using
+clustered operation, you can simply kill the worker process and it will
+be restarted by the master process.
+
+## SEE ALSO
+
+__chef-expander-cluster__(8)
+__chef-solr__(8)
+
+Full documentation for Chef and chef-server is located on the Chef
+wiki, http://wiki.opscode.com/display/chef/Home.
+
+## AUTHOR
+
+Chef was written by Adam Jacob <adam@ospcode.com> of Opscode
+(http://www.opscode.com),  with contributions from the community. This
+manual page was created by Nuo Yan <nuo@opscode.com>. Permission is
+granted to copy, distribute and / or modify this document under the
+terms of the Apache 2.0 License.
+
+On Debian systems, the complete text of the Apache 2.0 License  can  be
+found in /usr/share/common-licenses/Apache-2.0.

data/distro/common/markdown/man8/chef-server-webui.mkd

@@ -0,0 +1,121 @@
+chef-server-webui(8) -- Start the Chef Server merb application slice providing Web User Interface (Management Console).
+========================================
+
+## SYNOPSIS
+
+__chef-server-webui__ _(options)_
+
+  * `-u`, `--user USER`:
+    This  flag  is  for having chef-server-webui run as a user other than the
+    one currently logged in. Note: if you set this you must also provide a
+    --group option for it to take effect.
+  * `-G`, `--group GROUP`:
+    This flag is for having chef-server-webui run as a group other than the
+    one currently logged in. Note: if you set this you  must also provide a
+    --user option for it to take effect.
+  * `-d`, `--daemonize`:
+    This will run a single chef-server-webui in the background.
+  * `-N`, `--no-daemonize`:
+    This will allow you to run a cluster in console mode.
+  * `-c`, `--cluster-nodes NUM_MERBS`:
+    Number of merb daemons to run for chef-server-webui.
+  * `-I`, `--init-file FILE`:
+    File to use for initialization on load, defaults to config/init.rb.
+  * `-p`, `--port PORTNUM`:
+    Port to run chef-server-webui on, defaults to 4040. Additional nodes (-c)
+    listen on incrementing port numbers.
+  * `-o`, `--socket-file FILE`:
+    Socket  file  to  run  chef-server-webui on, defaults to
+    [Merb.root]/log/merb.sock. This is for web servers, like thin, that use
+    sockets. Specify this *only* if you *must*.
+  * `-s`, `--socket SOCKNUM`:
+    Socket number to run chef-server-webui on, defaults to 0.
+  * `-n`, `--name NAME`:
+    Set the name of the application. This is used in the process title and
+    log file names.
+  * `-P`, `--pid PIDFILE`:
+    PID file, defaults to [Merb.root]/log/merb.main.pid for the master
+    process and[Merb.root]/log/merb.[port number].pid for  worker processes.
+    For clusters, use %s to specify where in the file chef-server-webui
+    should place the port number. For instance: -P myapp.%s.pid.
+  * `-h`, `--host HOSTNAME`:
+    Host to bind to (default is 0.0.0.0).
+  * `-m`, `--merb-root PATH_TO_APP_ROOT`:
+    The path to the Merb.root for the app you want to run
+    (default is current working directory).
+  * `-a`, `--adapter ADAPTER`:
+    The rack adapter to use to run chef-server-webui (default is mongrel)
+    [mongrel, emongrel, thin, ebb, fastcgi, webrick].
+  * `-R`, `--rackup FILE`:
+    Load an alternate Rack config file (default is config/rack.rb).
+  * `-i`, `--irb-console`:
+    This flag will start chef-server-webui in irb console mode. All your models
+    and other classes will be available for you in an irb session.
+  * `-S`, `--sandbox`:
+    This flag will enable a sandboxed irb console. If your ORM supports
+    transactions, all edits will be rolled back on exit.
+  * `-l`, `--log-level LEVEL`:
+    Log levels can be set to any of these options:
+    debug < info < warn < error < fatal (default is info).
+  * `-L`, `--log LOGFILE`:
+    A string representing the logfile to use. Defaults to
+    [Merb.root]/log/merb.[main].log for the master process and
+    [Merb.root]/log/merb[port number].logfor worker processes.
+  * `-e`, `--environment STRING`:
+    Environment to run Merb under [development, production, testing]
+    (default is development).
+  * `-r`, `--script-runner ['RUBY CODE'| FULL_SCRIPT_PATH]`:
+    Command-line option to run scripts and/or code in the chef-server-webui
+    app.
+  * `-K`, `-graceful PORT or all`:
+    Gracefully kill chef-server-webui proceses by port number.
+    Use chef-server -K all to gracefully kill all merbs.
+  * `-k`, `--kill PORT`:
+    Force kill one merb worker by port number. This will cause the worker
+    to be respawned.
+  * `--fast-deploy`:
+    Reload the code, but not yourinit.rb or gems.
+  * `-X`, `--mutex on/off`:
+    This flag is for turning the mutex lock on and off.
+  * `-D`, `--debugger`:
+    Run chef-server-webui using rDebug.
+  * `-V`, `--verbose`:
+    Print extra information.
+  * `-C`, `--console-trap`:
+    Enter an irb console on ^C.
+  * `-?`, `-H`, `--help`:
+    Show this help message.
+
+## DESCRIPTION
+
+The Chef Server WebUI (Management Console) is a Merb application slice.
+The default listen port is 4040.
+
+The Management Console is Chef Server's web interface. Nodes, roles,
+cookbooks, data bags, and API clients can be managed through the Management
+Console. Search can also be done on the console.
+
+In order to start using the Management Console, you need to first create
+a user or change the default password on the "admin" user.
+
+The default credentials are:
+
+- `Username`: admin
+- `Password`: p@ssw0rd1
+
+## SEE ALSO
+
+Full documentation for Chef and chef-server-webui (Management Console)
+is located on the Chef wiki, http://wiki.opscode.com/display/chef/Home.
+
+## AUTHOR
+
+Chef was written by Adam Jacob <adam@ospcode.com> of Opscode
+(http://www.opscode.com), with contributions from the  community. This
+manual page was written by Joshua Timberman <joshua@opscode.com> with
+help2man for the Debian project (but may be used by others). Permission
+is granted to copy, distribute and / or modify this document under the
+terms of the Apache 2.0 License.
+
+On Debian systems, the complete text of the Apache 2.0 License can be
+found in /usr/share/common-licenses/Apache-2.0.