ceedling 0.31.1 → 1.0.1

data/examples/blinky/test/support/stub_sfr_defs.h

@@ -1,269 +0,0 @@
-/* Copyright (c) 2002, Marek Michalkiewicz <marekm@amelek.gda.pl>
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-   * Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   * Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   * Neither the name of the copyright holders nor the names of
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.  */
-
-/* avr/sfr_defs.h - macros for accessing AVR special function registers */
-
-/* $Id: sfr_defs.h,v 1.18.2.1 2008/04/28 22:05:42 arcanum Exp $ */
-
-#ifndef _AVR_SFR_DEFS_H_
-#define _AVR_SFR_DEFS_H_ 1
-
-/** \defgroup avr_sfr_notes Additional notes from <avr/sfr_defs.h>
-    \ingroup avr_sfr
-
-   The \c <avr/sfr_defs.h> file is included by all of the \c <avr/ioXXXX.h>
-   files, which use macros defined here to make the special function register
-   definitions look like C variables or simple constants, depending on the
-   <tt>_SFR_ASM_COMPAT</tt> define.  Some examples from \c <avr/iocanxx.h> to
-   show how to define such macros:
-
-\code
-#define PORTA   _SFR_IO8(0x02)
-#define EEAR    _SFR_IO16(0x21)
-#define UDR0    _SFR_MEM8(0xC6)
-#define TCNT3   _SFR_MEM16(0x94)
-#define CANIDT  _SFR_MEM32(0xF0)
-\endcode
-
-   If \c _SFR_ASM_COMPAT is not defined, C programs can use names like
-   <tt>PORTA</tt> directly in C expressions (also on the left side of
-   assignment operators) and GCC will do the right thing (use short I/O
-   instructions if possible).  The \c __SFR_OFFSET definition is not used in
-   any way in this case.
-
-   Define \c _SFR_ASM_COMPAT as 1 to make these names work as simple constants
-   (addresses of the I/O registers).  This is necessary when included in
-   preprocessed assembler (*.S) source files, so it is done automatically if
-   \c __ASSEMBLER__ is defined.  By default, all addresses are defined as if
-   they were memory addresses (used in \c lds/sts instructions).  To use these
-   addresses in \c in/out instructions, you must subtract 0x20 from them.
-
-   For more backwards compatibility, insert the following at the start of your
-   old assembler source file:
-
-\code
-#define __SFR_OFFSET 0
-\endcode
-
-   This automatically subtracts 0x20 from I/O space addresses, but it's a
-   hack, so it is recommended to change your source: wrap such addresses in
-   macros defined here, as shown below.  After this is done, the
-   <tt>__SFR_OFFSET</tt> definition is no longer necessary and can be removed.
-
-   Real example - this code could be used in a boot loader that is portable
-   between devices with \c SPMCR at different addresses.
-
-\verbatim
-<avr/iom163.h>: #define SPMCR _SFR_IO8(0x37)
-<avr/iom128.h>: #define SPMCR _SFR_MEM8(0x68)
-\endverbatim
-
-\code
-#if _SFR_IO_REG_P(SPMCR)
-  out _SFR_IO_ADDR(SPMCR), r24
-#else
-  sts _SFR_MEM_ADDR(SPMCR), r24
-#endif
-\endcode
-
-   You can use the \c in/out/cbi/sbi/sbic/sbis instructions, without the
-   <tt>_SFR_IO_REG_P</tt> test, if you know that the register is in the I/O
-   space (as with \c SREG, for example).  If it isn't, the assembler will
-   complain (I/O address out of range 0...0x3f), so this should be fairly
-   safe.
-
-   If you do not define \c __SFR_OFFSET (so it will be 0x20 by default), all
-   special register addresses are defined as memory addresses (so \c SREG is
-   0x5f), and (if code size and speed are not important, and you don't like
-   the ugly \#if above) you can always use lds/sts to access them.  But, this
-   will not work if <tt>__SFR_OFFSET</tt> != 0x20, so use a different macro
-   (defined only if <tt>__SFR_OFFSET</tt> == 0x20) for safety:
-
-\code
-  sts _SFR_ADDR(SPMCR), r24
-\endcode
-
-   In C programs, all 3 combinations of \c _SFR_ASM_COMPAT and
-   <tt>__SFR_OFFSET</tt> are supported - the \c _SFR_ADDR(SPMCR) macro can be
-   used to get the address of the \c SPMCR register (0x57 or 0x68 depending on
-   device). */
-
-#ifdef __ASSEMBLER__
-#define _SFR_ASM_COMPAT 1
-#elif !defined(_SFR_ASM_COMPAT)
-#define _SFR_ASM_COMPAT 0
-#endif
-
-#ifndef __ASSEMBLER__
-/* These only work in C programs.  */
-#include <inttypes.h>
-
-#define _MMIO_BYTE(mem_addr) (*(volatile uint8_t *)(mem_addr))
-#define _MMIO_WORD(mem_addr) (*(volatile uint16_t *)(mem_addr))
-#define _MMIO_DWORD(mem_addr) (*(volatile uint32_t *)(mem_addr))
-#endif
-
-#if _SFR_ASM_COMPAT
-
-#ifndef __SFR_OFFSET
-/* Define as 0 before including this file for compatibility with old asm
-   sources that don't subtract __SFR_OFFSET from symbolic I/O addresses.  */
-#  if __AVR_ARCH__ >= 100
-#    define __SFR_OFFSET 0x00
-#  else
-#    define __SFR_OFFSET 0x20
-#  endif
-#endif
-
-#if (__SFR_OFFSET != 0) && (__SFR_OFFSET != 0x20)
-#error "__SFR_OFFSET must be 0 or 0x20"
-#endif
-
-#define _SFR_MEM8(mem_addr) (mem_addr)
-#define _SFR_MEM16(mem_addr) (mem_addr)
-#define _SFR_MEM32(mem_addr) (mem_addr)
-#define _SFR_IO8(io_addr) ((io_addr) + __SFR_OFFSET)
-#define _SFR_IO16(io_addr) ((io_addr) + __SFR_OFFSET)
-
-#define _SFR_IO_ADDR(sfr) ((sfr) - __SFR_OFFSET)
-#define _SFR_MEM_ADDR(sfr) (sfr)
-#define _SFR_IO_REG_P(sfr) ((sfr) < 0x40 + __SFR_OFFSET)
-
-#if (__SFR_OFFSET == 0x20)
-/* No need to use ?: operator, so works in assembler too.  */
-#define _SFR_ADDR(sfr) _SFR_MEM_ADDR(sfr)
-#elif !defined(__ASSEMBLER__)
-#define _SFR_ADDR(sfr) (_SFR_IO_REG_P(sfr) ? (_SFR_IO_ADDR(sfr) + 0x20) : _SFR_MEM_ADDR(sfr))
-#endif
-
-#else  /* !_SFR_ASM_COMPAT */
-
-#ifndef __SFR_OFFSET
-#  if __AVR_ARCH__ >= 100
-#    define __SFR_OFFSET 0x00
-#  else
-#    define __SFR_OFFSET 0x20
-#  endif
-#endif
-
-#define _SFR_MEM8(mem_addr) _MMIO_BYTE(mem_addr)
-#define _SFR_MEM16(mem_addr) _MMIO_WORD(mem_addr)
-#define _SFR_MEM32(mem_addr) _MMIO_DWORD(mem_addr)
-#define _SFR_IO8(io_addr) _MMIO_BYTE((io_addr) + __SFR_OFFSET)
-#define _SFR_IO16(io_addr) _MMIO_WORD((io_addr) + __SFR_OFFSET)
-
-#define _SFR_MEM_ADDR(sfr) ((uint16_t) &(sfr))
-#define _SFR_IO_ADDR(sfr) (_SFR_MEM_ADDR(sfr) - __SFR_OFFSET)
-#define _SFR_IO_REG_P(sfr) (_SFR_MEM_ADDR(sfr) < 0x40 + __SFR_OFFSET)
-
-#define _SFR_ADDR(sfr) _SFR_MEM_ADDR(sfr)
-
-#endif /* !_SFR_ASM_COMPAT */
-
-#define _SFR_BYTE(sfr) _MMIO_BYTE(_SFR_ADDR(sfr))
-#define _SFR_WORD(sfr) _MMIO_WORD(_SFR_ADDR(sfr))
-#define _SFR_DWORD(sfr) _MMIO_DWORD(_SFR_ADDR(sfr))
-
-/** \name Bit manipulation */
-
-/*@{*/
-/** \def _BV
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Converts a bit number into a byte value.
-
-    \note The bit shift is performed by the compiler which then inserts the
-    result into the code. Thus, there is no run-time overhead when using
-    _BV(). */
-    
-#define _BV(bit) (1 << (bit))
-
-/*@}*/
-
-#ifndef _VECTOR
-#define _VECTOR(N) __vector_ ## N
-#endif
-
-#ifndef __ASSEMBLER__
-
-
-/** \name IO register bit manipulation */
-
-/*@{*/
-
-
-
-/** \def bit_is_set
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Test whether bit \c bit in IO register \c sfr is set. 
-    This will return a 0 if the bit is clear, and non-zero
-    if the bit is set. */
-
-#define bit_is_set(sfr, bit) (_SFR_BYTE(sfr) & _BV(bit))
-
-/** \def bit_is_clear
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Test whether bit \c bit in IO register \c sfr is clear. 
-    This will return non-zero if the bit is clear, and a 0
-    if the bit is set. */
-
-#define bit_is_clear(sfr, bit) (!(_SFR_BYTE(sfr) & _BV(bit)))
-
-/** \def loop_until_bit_is_set
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Wait until bit \c bit in IO register \c sfr is set. */
-
-#define loop_until_bit_is_set(sfr, bit) do { } while (bit_is_clear(sfr, bit))
-
-/** \def loop_until_bit_is_clear
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Wait until bit \c bit in IO register \c sfr is clear. */
-
-#define loop_until_bit_is_clear(sfr, bit) do { } while (bit_is_set(sfr, bit))
-
-/*@}*/
-
-#endif /* !__ASSEMBLER__ */
-
-#endif  /* _SFR_DEFS_H_ */

data/examples/blinky/test/test_BlinkTask.c

@@ -1,42 +0,0 @@
-#include "unity.h"
-#include "BlinkTask.h"
-#include "stub_io.h"
-
-// every test file requires this function
-// setUp() is called by the generated runner before each test case function
-void setUp(void)
-{
-    PORTB = 0;
-}    
-                       
-// every test file requires this function
-// tearDown() is called by the generated runner before each test case function
-void tearDown(void)
-{
-}
-
-void test_BlinkTask_should_toggle_led(void)
-{
-    /* Ensure known test state */
-
-    /* Setup expected call chain */
-
-    /* Call function under test */
-    BlinkTask();
-
-    /* Verify test results */
-    TEST_ASSERT_EQUAL(0x20, PORTB);
-}
-void test_BlinkTask_should_toggle_led_LOW(void)
-{
-    /* Ensure known test state */
-    PORTB = 0x20;
-
-    /* Setup expected call chain */
-
-    /* Call function under test */
-    BlinkTask();
-
-    /* Verify test results */
-    TEST_ASSERT_EQUAL(0, PORTB);
-}

data/examples/blinky/test/test_Configure.c

@@ -1,29 +0,0 @@
-#include "unity.h"
-#include "Configure.h"
-#include "stub_io.h"
-#include "mock_stub_interrupt.h"
-
-void setUp(void)
-{
-}
-
-void tearDown(void)
-{
-}
-
-void test_Configure_should_setup_timer_and_port(void)
-    {
-    /* Ensure known test state */
-
-    /* Setup expected call chain */
-    //these are defined into assembly instructions. 
-    cli_Expect(); 
-    sei_Expect();
-    /* Call function under test */
-    Configure();
-
-    /* Verify test results */
-    TEST_ASSERT_EQUAL(3, TCCR0B);
-    TEST_ASSERT_EQUAL(1, TIMSK0);
-    TEST_ASSERT_EQUAL(0x20, DDRB);
-}

data/examples/blinky/test/test_main.c

@@ -1,60 +0,0 @@
-#include "unity.h"
-#include "main.h"
-#include "stub_io.h"
-#include "mock_Configure.h"
-#include "mock_BlinkTask.h"
-void setUp(void) {}    // every test file requires this function;
-                       // setUp() is called by the generated runner before each test case function
-void tearDown(void) {} // every test file requires this function;
-                       // tearDown() is called by the generated runner before each test case function
-
-void test_AppMain_should_call_configure(void)
-{
-    /* Ensure known test state */
-    BlinkTaskReady=0;
-    /* Setup expected call chain */
-    Configure_Expect();
-    /* Call function under test */
-    AppMain();
-
-    /* Verify test results */
-    TEST_ASSERT_EQUAL(0, BlinkTaskReady);
-}
-void test_AppMain_should_call_configure_and_BlinkTask(void)
-{
-    /* Ensure known test state */
-    BlinkTaskReady=1;
-    /* Setup expected call chain */
-    Configure_Expect();
-    BlinkTask_Expect();
-    /* Call function under test */
-    AppMain();
-
-    /* Verify test results */
-    TEST_ASSERT_EQUAL(0, BlinkTaskReady);
-}
-void test_ISR_should_increment_tick(void)
-{
-    /* Ensure known test state */
-    tick = 0;
-    /* Setup expected call chain */
-
-    /* Call function under test */
-    ISR();
-
-    /* Verify test results */
-    TEST_ASSERT_EQUAL(1, tick);
-}
-void test_ISR_should_set_blinkReady_increment_tick(void)
-{
-    /* Ensure known test state */
-    tick = 1000;
-    /* Setup expected call chain */
-
-    /* Call function under test */
-    ISR();
-
-    /* Verify test results */
-    TEST_ASSERT_EQUAL(1, tick);
-    TEST_ASSERT_EQUAL(1, BlinkTaskReady);
-}

data/examples/temp_sensor/build/test/cache/AdcConductor.h

@@ -1,20 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-void AdcConductor_Init(void);
-
-void AdcConductor_Run(void);
-
-
-
-bool AdcConductor_JustHereToTest(void);
-
-bool AdcConductor_AlsoHereToTest(void);
-
-bool AdcConductor_YetAnotherTest(void);

data/examples/temp_sensor/build/test/cache/AdcHardware.h

@@ -1,16 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-void AdcHardware_Init(void);
-
-void AdcHardware_StartConversion(void);
-
-bool AdcHardware_GetSampleComplete(void);
-
-uint16 AdcHardware_GetSample(void);

data/examples/temp_sensor/build/test/cache/AdcHardwareConfigurator.h

@@ -1,14 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-void Adc_Reset(void);
-
-void Adc_ConfigureMode(void);
-
-void Adc_EnableTemperatureChannel(void);

data/examples/temp_sensor/build/test/cache/AdcModel.h

@@ -1,20 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-bool AdcModel_DoGetSample(void);
-
-void AdcModel_ProcessInput(uint16 millivolts);
-
-
-
-bool AdcModel_DoNothingExceptTestASpecialType(EXAMPLE_STRUCT_T ExampleStruct);
-
-bool AdModel_DoNothingExceptTestPointers(uint32* pExample);
-
-EXAMPLE_STRUCT_T AdcModel_DoNothingExceptReturnASpecialType(void);

data/examples/temp_sensor/build/test/cache/AdcTemperatureSensor.h

@@ -1,14 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-void Adc_StartTemperatureSensorConversion(void);
-
-bool Adc_TemperatureSensorSampleReady(void);
-
-uint16 Adc_ReadTemperatureSensor(void);

data/examples/temp_sensor/build/test/cache/Executor.h

@@ -1,12 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-void Executor_Init(void);
-
-bool Executor_Run(void);

data/examples/temp_sensor/build/test/cache/IntrinsicsWrapper.h

@@ -1,9 +0,0 @@
-
-
-
-
-
-
-void Interrupt_Enable(void);
-
-void Interrupt_Disable(void);

data/examples/temp_sensor/build/test/cache/Model.h

@@ -1,10 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-void Model_Init(void);

data/examples/temp_sensor/build/test/cache/TaskScheduler.h

@@ -1,16 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-void TaskScheduler_Init(void);
-
-void TaskScheduler_Update(uint32 time);
-
-bool TaskScheduler_DoUsart(void);
-
-bool TaskScheduler_DoAdc(void);

data/examples/temp_sensor/build/test/cache/TemperatureCalculator.h

@@ -1,10 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-float TemperatureCalculator_Calculate(uint16 millivolts);

data/examples/temp_sensor/build/test/cache/TemperatureFilter.h

@@ -1,14 +0,0 @@
-#include "src/Types.h"
-
-
-
-
-
-
-
-
-void TemperatureFilter_Init(void);
-
-float TemperatureFilter_GetTemperatureInCelcius(void);
-
-void TemperatureFilter_ProcessInput(float temperature);