ceedling 0.15.1 → 0.15.2

data/vendor/unity/Gemfile

@@ -1,4 +0,0 @@
-source "http://rubygems.org/"
-
-gem "rake"
-gem "test-unit", "2.4.3"

data/vendor/unity/examples/helper/UnityHelper.h

@@ -1,12 +0,0 @@
-#ifndef _TESTHELPER_H
-#define _TESTHELPER_H
-
-#include "Types.h"
-
-void AssertEqualExampleStruct(const EXAMPLE_STRUCT_T expected, const EXAMPLE_STRUCT_T actual, const unsigned short line);
-
-#define UNITY_TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual, line, message) AssertEqualExampleStruct(expected, actual, line);
-
-#define TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual) UNITY_TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual, __LINE__, NULL);
-
-#endif // _TESTHELPER_H

data/vendor/unity/examples/rakefile_helper.rb

@@ -1,256 +0,0 @@
-require 'yaml'
-require 'fileutils'
-require HERE+'../auto/unity_test_summary'
-require HERE+'../auto/generate_test_runner'
-require HERE+'../auto/colour_reporter'
-
-module RakefileHelpers
-
-  C_EXTENSION = '.c'
-  
-  def load_configuration(config_file)
-    $cfg_file = "../targets/#{config_file}"
-    $cfg = YAML.load(File.read($cfg_file))
-  end
-  
-  def configure_clean
-    CLEAN.include($cfg['compiler']['build_path'] + '*.*') unless $cfg['compiler']['build_path'].nil?
-  end
-  
-  def configure_toolchain(config_file=DEFAULT_CONFIG_FILE)
-    config_file += '.yml' unless config_file =~ /\.yml$/
-    load_configuration('../targets/'+config_file)
-    configure_clean
-  end
-  
-  def get_unit_test_files
-    path = $cfg['compiler']['unit_tests_path'] + 'Test*' + C_EXTENSION
-    path.gsub!(/\\/, '/')
-    FileList.new(path)
-  end
-  
-  def get_local_include_dirs
-    include_dirs = $cfg['compiler']['includes']['items'].dup
-    include_dirs.delete_if {|dir| dir.is_a?(Array)}
-    return include_dirs
-  end
-
-  def extract_headers(filename)
-    includes = []
-    lines = File.readlines(filename)
-    lines.each do |line|
-      m = line.match(/^\s*#include\s+\"\s*(.+\.[hH])\s*\"/)
-      if not m.nil?
-        includes << m[1]
-      end
-    end
-    return includes
-  end
-
-  def find_source_file(header, paths)
-    paths.each do |dir|
-      src_file = dir + header.ext(C_EXTENSION)
-      if (File.exists?(src_file))
-        return src_file
-      end
-    end
-    return nil
-  end
-  
-  def tackit(strings)
-    if strings.is_a?(Array)
-      result = "\"#{strings.join}\""
-    else
-      result = strings
-    end
-    return result
-  end
-  
-  def squash(prefix, items)
-    result = ''
-    items.each { |item| result += " #{prefix}#{tackit(item)}" }
-    return result
-  end
-
-  def build_compiler_fields
-    command  = tackit($cfg['compiler']['path'])
-    if $cfg['compiler']['defines']['items'].nil?
-      defines  = ''
-    else
-      defines  = squash($cfg['compiler']['defines']['prefix'], $cfg['compiler']['defines']['items'])
-    end
-    options  = squash('', $cfg['compiler']['options'])
-    includes = squash($cfg['compiler']['includes']['prefix'], $cfg['compiler']['includes']['items'])
-    includes = includes.gsub(/\\ /, ' ').gsub(/\\\"/, '"').gsub(/\\$/, '') # Remove trailing slashes (for IAR)
-    return {:command => command, :defines => defines, :options => options, :includes => includes}
-  end
-
-  def compile(file, defines=[])
-    compiler = build_compiler_fields
-    cmd_str  = "#{compiler[:command]}#{compiler[:defines]}#{compiler[:options]}#{compiler[:includes]} #{file} " +
-               "#{$cfg['compiler']['object_files']['prefix']}#{$cfg['compiler']['object_files']['destination']}"
-    obj_file = "#{File.basename(file, C_EXTENSION)}#{$cfg['compiler']['object_files']['extension']}"
-    execute(cmd_str + obj_file)
-    return obj_file
-  end
-  
-  def build_linker_fields
-    command  = tackit($cfg['linker']['path'])
-    if $cfg['linker']['options'].nil?
-      options  = ''
-    else
-      options  = squash('', $cfg['linker']['options'])
-    end
-    if ($cfg['linker']['includes'].nil? || $cfg['linker']['includes']['items'].nil?)
-      includes = ''
-    else
-      includes = squash($cfg['linker']['includes']['prefix'], $cfg['linker']['includes']['items'])
-    end
-    includes = includes.gsub(/\\ /, ' ').gsub(/\\\"/, '"').gsub(/\\$/, '') # Remove trailing slashes (for IAR)
-    return {:command => command, :options => options, :includes => includes}
-  end
-  
-  def link_it(exe_name, obj_list)
-    linker = build_linker_fields
-    cmd_str = "#{linker[:command]}#{linker[:options]}#{linker[:includes]} " +
-      (obj_list.map{|obj|"#{$cfg['linker']['object_files']['path']}#{obj} "}).join +
-      $cfg['linker']['bin_files']['prefix'] + ' ' +
-      $cfg['linker']['bin_files']['destination'] +
-      exe_name + $cfg['linker']['bin_files']['extension']
-    execute(cmd_str)
-  end
-  
-  def build_simulator_fields
-    return nil if $cfg['simulator'].nil?
-    if $cfg['simulator']['path'].nil?
-      command = ''
-    else
-      command = (tackit($cfg['simulator']['path']) + ' ')
-    end
-    if $cfg['simulator']['pre_support'].nil?
-      pre_support = ''
-    else
-      pre_support = squash('', $cfg['simulator']['pre_support'])
-    end
-    if $cfg['simulator']['post_support'].nil?
-      post_support = ''
-    else
-      post_support = squash('', $cfg['simulator']['post_support'])
-    end
-    return {:command => command, :pre_support => pre_support, :post_support => post_support}
-  end
-  
-  def execute(command_string, verbose=true, raise_on_fail=true)
-    report command_string
-    output = `#{command_string}`.chomp
-    report(output) if (verbose && !output.nil? && (output.length > 0))
-    if (($?.exitstatus != 0) and (raise_on_fail))
-      raise "Command failed. (Returned #{$?.exitstatus})"
-    end
-    return output
-  end
-  
-  def report_summary
-    summary = UnityTestSummary.new
-    summary.set_root_path(HERE)
-    results_glob = "#{$cfg['compiler']['build_path']}*.test*"
-    results_glob.gsub!(/\\/, '/')
-    results = Dir[results_glob]
-    summary.set_targets(results)
-    summary.run
-    fail_out "FAIL: There were failures" if (summary.failures > 0)
-  end
-  
-  def run_tests(test_files)
-    
-    report 'Running system tests...'
-    
-    # Tack on TEST define for compiling unit tests
-    load_configuration($cfg_file)
-    test_defines = ['TEST']
-    $cfg['compiler']['defines']['items'] = [] if $cfg['compiler']['defines']['items'].nil?
-    $cfg['compiler']['defines']['items'] << 'TEST'
-    
-    include_dirs = get_local_include_dirs
-    
-    # Build and execute each unit test
-    test_files.each do |test|
-      obj_list = []
-      
-      # Detect dependencies and build required required modules
-      extract_headers(test).each do |header|
-        # Compile corresponding source file if it exists
-        src_file = find_source_file(header, include_dirs)
-        if !src_file.nil?
-          obj_list << compile(src_file, test_defines)
-        end
-      end
-      
-      # Build the test runner (generate if configured to do so)
-      test_base = File.basename(test, C_EXTENSION)
-      runner_name = test_base + '_Runner.c'
-      if $cfg['compiler']['runner_path'].nil?
-        runner_path = $cfg['compiler']['build_path'] + runner_name
-        test_gen = UnityTestRunnerGenerator.new($cfg_file)
-        test_gen.run(test, runner_path)
-      else
-        runner_path = $cfg['compiler']['runner_path'] + runner_name
-      end
-
-      obj_list << compile(runner_path, test_defines)
-      
-      # Build the test module
-      obj_list << compile(test, test_defines)
-      
-      # Link the test executable
-      link_it(test_base, obj_list)
-      
-      # Execute unit test and generate results file
-      simulator = build_simulator_fields
-      executable = $cfg['linker']['bin_files']['destination'] + test_base + $cfg['linker']['bin_files']['extension']
-      if simulator.nil?
-        cmd_str = executable
-      else
-        cmd_str = "#{simulator[:command]} #{simulator[:pre_support]} #{executable} #{simulator[:post_support]}"
-      end
-      output = execute(cmd_str, true, false)
-      test_results = $cfg['compiler']['build_path'] + test_base
-      if output.match(/OK$/m).nil?
-        test_results += '.testfail'
-      else
-        test_results += '.testpass'
-      end
-      File.open(test_results, 'w') { |f| f.print output }
-    end
-  end
-  
-  def build_application(main)
-  
-    report "Building application..."
-    
-    obj_list = []
-    load_configuration($cfg_file)
-    main_path = $cfg['compiler']['source_path'] + main + C_EXTENSION
-
-    # Detect dependencies and build required required modules
-    include_dirs = get_local_include_dirs
-    extract_headers(main_path).each do |header|
-      src_file = find_source_file(header, include_dirs)
-      if !src_file.nil?
-        obj_list << compile(src_file)
-      end
-    end
-    
-    # Build the main source file
-    main_base = File.basename(main_path, C_EXTENSION)
-    obj_list << compile(main_path)
-    
-    # Create the executable
-    link_it(main_base, obj_list)
-  end
-  
-  def fail_out(msg)
-    puts msg
-    exit(-1)
-  end
-end

data/vendor/unity/examples/readme.txt

@@ -1,18 +0,0 @@
-Example Project
-
-This example project gives an example of some passing, ignored, and failing tests.
-It's simple and meant for you to look over and get an idea for what all of this stuff does.
-
-You can build and test using the makefile if you have gcc installed (you may need to tweak
-the locations of some tools in the makefile).  Otherwise, the rake version will let you
-test with gcc or a couple versions of IAR.  You can tweak the yaml files to get those versions
-running.
-
-Ruby is required if you're using the rake version (obviously).  This version shows off most of
-Unity's advanced features (automatically creating test runners, fancy summaries, etc.)  
-
-The makefile version doesn't require anything outside of your normal build tools, but won't do the
-extras for you.  So that you can test right away, we've written the test runners for you and 
-put them in the test\no_ruby subdirectory.  If you make changes to the tests or source, you might
-need to update these (like when you add or remove tests).  Do that for a while and you'll learn
-why you really want to start using the Ruby tools.