ceedling 0.15.1 → 0.15.2

data/vendor/c_exception/vendor/unity/auto/test_file_filter.rb

@@ -1,23 +0,0 @@
-# ==========================================
-#   Unity Project - A Test Framework for C
-#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
-#   [Released under MIT License. Please refer to license.txt for details]
-# ========================================== 
-
-require'yaml'
-
-module RakefileHelpers
-  class TestFileFilter
-    def initialize(all_files = false)
-      @all_files = all_files
-      if not @all_files == true
-        if File.exist?('test_file_filter.yml')
-          filters = YAML.load_file( 'test_file_filter.yml' )
-          @all_files, @only_files, @exclude_files = 
-            filters[:all_files], filters[:only_files], filters[:exclude_files] 
-        end
-      end
-    end		
-    attr_accessor :all_files, :only_files, :exclude_files
-  end
-end

data/vendor/c_exception/vendor/unity/auto/unity_test_summary.rb

@@ -1,139 +0,0 @@
-# ==========================================
-#   Unity Project - A Test Framework for C
-#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
-#   [Released under MIT License. Please refer to license.txt for details]
-# ========================================== 
-
-#!/usr/bin/ruby
-#
-# unity_test_summary.rb
-#
-require 'fileutils'
-require 'set'
-
-class UnityTestSummary
-  include FileUtils::Verbose
-
-  attr_reader :report, :total_tests, :failures, :ignored
-  
-  def initialize
-    @report = ''
-    @total_tests = 0
-    @failures = 0
-    @ignored = 0
-  end
-  
-  def run
-    # Clean up result file names
-    results = @targets.map {|target| target.gsub(/\\/,'/')}
-    
-    # Dig through each result file, looking for details on pass/fail:   
-    failure_output = []
-    ignore_output = []
-    
-    results.each do |result_file|
-      lines = File.readlines(result_file).map { |line| line.chomp }
-      if lines.length == 0
-        raise "Empty test result file: #{result_file}"
-      else
-        output = get_details(result_file, lines)
-        failure_output << output[:failures] unless output[:failures].empty?
-        ignore_output  << output[:ignores]  unless output[:ignores].empty?
-        tests,failures,ignored = parse_test_summary(lines)
-        @total_tests += tests
-        @failures += failures
-        @ignored += ignored
-      end
-    end
-    
-    if @ignored > 0
-      @report += "\n"
-      @report += "--------------------------\n"
-      @report += "UNITY IGNORED TEST SUMMARY\n"
-      @report += "--------------------------\n"
-      @report += ignore_output.flatten.join("\n")
-    end
-    
-    if @failures > 0
-      @report += "\n"
-      @report += "--------------------------\n"
-      @report += "UNITY FAILED TEST SUMMARY\n"
-      @report += "--------------------------\n"
-      @report += failure_output.flatten.join("\n")
-    end
-  
-    @report += "\n"
-    @report += "--------------------------\n"
-    @report += "OVERALL UNITY TEST SUMMARY\n"
-    @report += "--------------------------\n"
-    @report += "#{@total_tests} TOTAL TESTS #{@failures} TOTAL FAILURES #{@ignored} IGNORED\n"
-    @report += "\n"
-  end
-  
-  def set_targets(target_array)
-    @targets = target_array
-  end
-  
-  def set_root_path(path)
-    @root = path
-  end
-
-  def usage(err_msg=nil)
-    puts "\nERROR: "
-    puts err_msg if err_msg
-    puts "\nUsage: unity_test_summary.rb result_file_directoy/ root_path/"
-    puts "     result_file_directory - The location of your relults files." 
-    puts "                             Defaults to current directory if not specified."
-    puts "                             Should end in / if specified."
-    puts "     root_path - Helpful for producing more verbose output if using relative paths."
-    exit 1
-  end
-  
-  protected
-
-  def get_details(result_file, lines)
-    results = { :failures => [], :ignores => [], :successes => [] }
-    lines.each do |line|
-      src_file,src_line,test_name,status,msg = line.split(/:/)
-      line_out = ((@root and (@root != 0)) ? "#{@root}#{line}" : line ).gsub(/\//, "\\")
-      case(status)
-        when 'IGNORE' then results[:ignores]   << line_out
-        when 'FAIL'   then results[:failures]  << line_out
-        when 'PASS'   then results[:successes] << line_out
-      end
-    end
-    return results
-  end
-  
-  def parse_test_summary(summary)
-    if summary.find { |v| v =~ /(\d+) Tests (\d+) Failures (\d+) Ignored/ }
-      [$1.to_i,$2.to_i,$3.to_i]
-    else
-      raise "Couldn't parse test results: #{summary}"
-    end
-  end
-
-  def here; File.expand_path(File.dirname(__FILE__)); end
-  
-end
-
-if $0 == __FILE__
-  uts = UnityTestSummary.new
-  begin
-    #look in the specified or current directory for result files
-    ARGV[0] ||= './'
-    targets = "#{ARGV[0].gsub(/\\/, '/')}*.test*"
-    results = Dir[targets]
-    raise "No *.testpass or *.testfail files found in '#{targets}'" if results.empty?
-    uts.set_targets(results)
-    
-    #set the root path
-    ARGV[1] ||= File.expand_path(File.dirname(__FILE__)) + '/'
-    uts.set_root_path(ARGV[1])
-    
-    #run the summarizer
-    puts uts.run
-  rescue Exception => e
-    uts.usage e.message
-  end
-end

data/vendor/c_exception/vendor/unity/docs/Unity Summary.txt

@@ -1,217 +0,0 @@
-==============
-Unity Test API
-==============
-
-[Copyright (c) 2007 - Unity Project by Mike Karlesky, Mark VanderVoord, and Greg Williams]
-
--------------
-Running Tests 
-------------- 
-
-RUN_TEST(func, linenum)
-
-Each Test is run within the macro RUN_TEST.  This macro performs necessary setup before the test is called and handles cleanup and result tabulation afterwards.
-
---------------
-Ignoring Tests
---------------
-
-There are times when a test is incomplete or not valid for some reason.  At these times, TEST_IGNORE can be called.  Control will immediately be returned to the caller of the test, and no failures will be returned.
-
-TEST_IGNORE()
-
-Ignore this test and return immediately
-
-TEST_IGNORE_MESSAGE (message)
-
-Ignore this test and return immediately.  Output a message stating why the test was ignored.
-
---------------
-Aborting Tests
---------------
-
-There are times when a test will contain an infinite loop on error conditions, or there may be reason to escape from the test early without executing the rest of the test.  A pair of macros support this functionality in Unity.  The first (TEST_PROTECT) sets up the feature, and handles emergency abort cases.  TEST_ABORT can then be used at any time within the tests to return to the last TEST_PROTECT call.
-
-TEST_PROTECT()
-
-Setup and Catch macro
-
-TEST_ABORT()
-
-Abort Test macro
-
-Example:
-
-main()
-{
-    if (TEST_PROTECT() == 0)
-    {
-        MyTest();
-    }
-}
-
-If MyTest calls TEST_ABORT, program control will immediately return to TEST_PROTECT with a non-zero return value.
-
-
-=======================
-Unity Assertion Summary
-=======================
-
---------------------
-Basic Validity Tests
---------------------
-
-TEST_ASSERT_TRUE(condition)
-
-Evaluates whatever code is in condition and fails if it evaluates to false
-
-TEST_ASSERT_FALSE(condition)
-
-Evaluates whatever code is in condition and fails if it evaluates to true
-
-TEST_ASSERT(condition)
-
-Another way of calling TEST_ASSERT_TRUE
-
-TEST_ASSERT_UNLESS(condition)
-
-Another way of calling TEST_ASSERT_FALSE
-
-TEST_FAIL()
-TEST_FAIL_MESSAGE(message)
-
-This test is automatically marked as a failure.  The message is output stating why.
-
-------------------------------
-Numerical Assertions: Integers
-------------------------------
-
-TEST_ASSERT_EQUAL_INT(expected, actual)
-TEST_ASSERT_EQUAL_INT8(expected, actual)
-TEST_ASSERT_EQUAL_INT16(expected, actual)
-TEST_ASSERT_EQUAL_INT32(expected, actual)
-TEST_ASSERT_EQUAL_INT64(expected, actual)
-
-Compare two integers for equality and display errors as signed integers. A cast will be performed
-to your natural integer size so often this can just be used.  When you need to specify the exact size,
-like when comparing arrays, you can use a specific version:
-
-
-
-TEST_ASSERT_EQUAL_UINT(expected, actual)	
-
-Compare two integers for equality and display errors as unsigned integers.  Like INT, there are 
-variants for different sizes also.
-
-
-
-TEST_ASSERT_EQUAL_HEX(expected, actual)
-
-Compares two integers for equality and display errors as hexadecimal.  Like the other integer comparisons,
-you can specify the size... here the size will also effect how many nibbles are shown (for example, HEX16 
-will show 4 nibbles).
-
-_ARRAY
-
-You can append _ARRAY to any of these macros to make an array comparison of that type.  Here you will
-need to care a bit more about the actual size of the value being checked.  You will also specify an
-additional argument which is the number of elements to compare.  For example:
-
-TEST_ASSERT_EQUAL_HEX8_ARRAY(expected, actual, elements)
-
-
-TEST_ASSERT_EQUAL(expected, actual)
-
-Another way of calling TEST_ASSERT_EQUAL_INT
-
-
-
-TEST_ASSERT_INT_WITHIN(delta, expected, actual)
-
-Asserts that the actual value is within plus or minus delta of the expected value.  This also comes in 
-size specific variants.
-
-
------------------------------
-Numerical Assertions: Bitwise
------------------------------
-
-TEST_ASSERT_BITS(mask, expected, actual)
-
-Use an integer mask to specify which bits should be compared between two other integers.  High bits in the mask are compared, low bits ignored.
-
-TEST_ASSERT_BITS_HIGH(mask, actual)
-
-Use an integer mask to specify which bits should be inspected to determine if they are all set high.  High bits in the mask are compared, low bits ignored.
-
-TEST_ASSERT_BITS_LOW(mask, actual)
-
-Use an integer mask to specify which bits should be inspected to determine if they are all set low.  High bits in the mask are compared, low bits ignored.
-
-TEST_ASSERT_BIT_HIGH(bit, actual)
-
-Test a single bit and verify that it is high.  The bit is specified 0-31 for a 32-bit integer.
-
-TEST_ASSERT_BIT_LOW(bit, actual)
-
-Test a single bit and verify that it is low.  The bit is specified 0-31 for a 32-bit integer.
-
-----------------------------
-Numerical Assertions: Floats
-----------------------------
-
-TEST_ASSERT_FLOAT_WITHIN(delta, expected, actual)
-
-Asserts that the actual value is within plus or minus delta of the expected value.
-
-TEST_ASSERT_EQUAL_FLOAT(expected, actual)
-
-Asserts that two floating point values are "equal" within a small % delta of the expected value.
-
------------------
-String Assertions
------------------
-
-TEST_ASSERT_EQUAL_STRING(expected, actual)
-
-Compare two null-terminate strings.  Fail if any character is different or if the lengths are different.
-
-TEST_ASSERT_EQUAL_STRING_MESSAGE(expected, actual, message)
-
-Compare two null-terminate strings.  Fail if any character is different or if the lengths are different. Output a custom message on failure.
-
-------------------
-Pointer Assertions
-------------------
-
-Most pointer operations can be performed by simply using the integer comparisons above.  However, a couple of special cases are added for clarity.
-
-TEST_ASSERT_NULL(pointer)
-
-Fails if the pointer is not equal to NULL
-
-TEST_ASSERT_NOT_NULL(pointer)
-
-Fails if the pointer is equal to NULL
-
-
------------------
-Memory Assertions
------------------
-
-TEST_ASSERT_EQUAL_MEMORY(expected, actual, len)
-
-Compare two blocks of memory.  This is a good generic assertion for types that can't be coerced into acting like
-standard types... but since it's a memory compare, you have to be careful that your data types are packed.
-
---------
-_MESSAGE
---------
-
-you can append _MESSAGE to any of the macros to make them take an additional argument.  This argument
-is a string that will be printed at the end of the failure strings.  This is useful for specifying more
-information about the problem.
-
-
-
-

data/vendor/c_exception/vendor/unity/docs/license.txt

@@ -1,31 +0,0 @@
- Copyright (c) 2007-2010 Mike Karlesky, Mark VanderVoord, Greg Williams
-
- Permission is hereby granted, free of charge, to any person
- obtaining a copy of this software and associated documentation
- files (the "Software"), to deal in the Software without
- restriction, including without limitation the rights to use,
- copy, modify, merge, publish, distribute, sublicense, and/or sell
- copies of the Software, and to permit persons to whom the
- Software is furnished to do so, subject to the following
- conditions:
-
- The above copyright notice and this permission notice shall be
- included in all copies or substantial portions of the Software.
-
- The end-user documentation included with the redistribution, if 
- any, must include the following acknowledgment: "This product 
- includes software developed for the Unity Project, by Mike Karlesky,
- Mark VanderVoord, and Greg Williams and other contributors", in 
- the same place and form as other third-party acknowledgments. 
- Alternately, this acknowledgment may appear in the software 
- itself, in the same form and location as other such third-party 
- acknowledgments.
- 
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- OTHER DEALINGS IN THE SOFTWARE.

data/vendor/c_exception/vendor/unity/examples/helper/UnityHelper.c

@@ -1,10 +0,0 @@
-#include "unity.h"
-#include "UnityHelper.h"
-#include <stdio.h>
-#include <string.h>
-
-void AssertEqualExampleStruct(const EXAMPLE_STRUCT_T expected, const EXAMPLE_STRUCT_T actual, const unsigned short line)
-{
-    UNITY_TEST_ASSERT_EQUAL_INT(expected.x, actual.x, line, "Example Struct Failed For Field x");
-    UNITY_TEST_ASSERT_EQUAL_INT(expected.y, actual.y, line, "Example Struct Failed For Field y");
-}

data/vendor/c_exception/vendor/unity/examples/helper/UnityHelper.h

@@ -1,12 +0,0 @@
-#ifndef _TESTHELPER_H
-#define _TESTHELPER_H
-
-#include "Types.h"
-
-void AssertEqualExampleStruct(const EXAMPLE_STRUCT_T expected, const EXAMPLE_STRUCT_T actual, const unsigned short line);
-
-#define UNITY_TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual, line, message) AssertEqualExampleStruct(expected, actual, line);
-
-#define TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual) UNITY_TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual, __LINE__, NULL);
-
-#endif // _TESTHELPER_H

data/vendor/c_exception/vendor/unity/examples/makefile

@@ -1,40 +0,0 @@
-# ==========================================
-#   Unity Project - A Test Framework for C
-#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
-#   [Released under MIT License. Please refer to license.txt for details]
-# ========================================== 
-
-C_COMPILER=gcc
-TARGET_BASE1=test1
-TARGET_BASE2=test2
-ifeq ($(OS),Windows_NT)
-	TARGET_EXTENSION=.exe
-else
-	TARGET_EXTENSION=.out
-endif
-TARGET1 = $(TARGET_BASE1)$(TARGET_EXTENSION)
-TARGET2 = $(TARGET_BASE2)$(TARGET_EXTENSION)
-SRC_FILES1=../src/unity.c src/ProductionCode.c  test/TestProductionCode.c  test/no_ruby/TestProductionCode_Runner.c
-SRC_FILES2=../src/unity.c src/ProductionCode2.c test/TestProductionCode2.c test/no_ruby/TestProductionCode2_Runner.c
-INC_DIRS=-Isrc -I../src
-SYMBOLS=-DTEST
-
-ifeq ($(OS),Windows_NT)
-	CLEANUP = del /F /Q build\* && del /F /Q $(TARGET1) && del /F /Q $(TARGET2)
-else
-	CLEANUP = rm -f build/*.o ; rm -f $(TARGET1) ; rm -f $(TARGET2)
-endif
-
-all: clean default
-
-default:
-#	ruby auto/generate_test_runner.rb test/TestProductionCode.c  test/no_ruby/TestProductionCode_Runner.c
-#	ruby auto/generate_test_runner.rb test/TestProductionCode2.c test/no_ruby/TestProductionCode2_Runner.c
-	$(C_COMPILER) $(INC_DIRS) $(SYMBOLS) $(SRC_FILES1) -o $(TARGET1)
-	$(C_COMPILER) $(INC_DIRS) $(SYMBOLS) $(SRC_FILES2) -o $(TARGET2)
-	$(TARGET1)
-	$(TARGET2)
-
-clean:
-	$(CLEANUP)
-