cairo 1.12.4-x86-mingw32 → 1.12.5-x86-mingw32

data/vendor/local/include/freetype2/freetype/freetype.h

@@ -4,7 +4,7 @@
 /*                                                                         */
 /*    FreeType high-level API and common types (specification only).       */
 /*                                                                         */
-/*  Copyright 1996-2012 by                                                 */
+/*  Copyright 1996-2013 by                                                 */
 /*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
 /*                                                                         */
 /*  This file is part of the FreeType project, and may only be used,       */
@@ -31,8 +31,8 @@
 
 #include <ft2build.h>
 #include FT_CONFIG_CONFIG_H
-#include FT_ERRORS_H
 #include FT_TYPES_H
+#include FT_ERRORS_H
 
 
 FT_BEGIN_HEADER
@@ -875,12 +875,15 @@ FT_BEGIN_HEADER
   /*                           usually negative.  Only relevant for        */
   /*                           scalable formats.                           */
   /*                                                                       */
-  /*    height              :: The height is the vertical distance         */
+  /*    height              :: This value is the vertical distance         */
   /*                           between two consecutive baselines,          */
   /*                           expressed in font units.  It is always      */
   /*                           positive.  Only relevant for scalable       */
   /*                           formats.                                    */
   /*                                                                       */
+  /*                           If you want the global glyph height, use    */
+  /*                           `ascender - descender'.                     */
+  /*                                                                       */
   /*    max_advance_width   :: The maximum advance width, in font units,   */
   /*                           for all glyphs in this face.  This can be   */
   /*                           used to make word wrapping computations     */
@@ -1109,8 +1112,8 @@ FT_BEGIN_HEADER
    *   FT_HAS_VERTICAL( face )
    *
    * @description:
-   *   A macro that returns true whenever a face object contains vertical
-   *   metrics.
+   *   A macro that returns true whenever a face object contains real
+   *   vertical metrics (and not only synthesized ones).
    *
    */
 #define FT_HAS_VERTICAL( face ) \
@@ -2231,6 +2234,12 @@ FT_BEGIN_HEADER
   /*    particular bitmap strike.  Use @FT_Select_Size instead in that     */
   /*    case.                                                              */
   /*                                                                       */
+  /*    The relation between the requested size and the resulting glyph    */
+  /*    size is dependent entirely on how the size is defined in the       */
+  /*    source face.  The font designer chooses the final size of each     */
+  /*    glyph relative to this size.  For more information refer to        */
+  /*    `http://www.freetype.org/freetype2/docs/glyphs/glyphs-2.html'      */
+  /*                                                                       */
   FT_EXPORT( FT_Error )
   FT_Request_Size( FT_Face          face,
                    FT_Size_Request  req );
@@ -2300,6 +2309,11 @@ FT_BEGIN_HEADER
   /* <Return>                                                              */
   /*    FreeType error code.  0~means success.                             */
   /*                                                                       */
+  /* <Note>                                                                */
+  /*    You should not rely on the resulting glyphs matching, or being     */
+  /*    constrained, to this pixel size.  Refer to @FT_Request_Size to     */
+  /*    understand how requested sizes relate to actual sizes.             */
+  /*                                                                       */
   FT_EXPORT( FT_Error )
   FT_Set_Pixel_Sizes( FT_Face  face,
                       FT_UInt  pixel_width,
@@ -2413,14 +2427,20 @@ FT_BEGIN_HEADER
    *     behaviour to more specific and useful cases.
    *
    *   FT_LOAD_NO_SCALE ::
-   *     Don't scale the outline glyph loaded, but keep it in font units.
+   *     Don't scale the loaded outline glyph but keep it in font units.
    *
    *     This flag implies @FT_LOAD_NO_HINTING and @FT_LOAD_NO_BITMAP, and
    *     unsets @FT_LOAD_RENDER.
    *
+   *     If the font is `tricky' (see @FT_FACE_FLAG_TRICKY for more), using
+   *     FT_LOAD_NO_SCALE usually yields meaningless outlines because the
+   *     subglyphs must be scaled and positioned with hinting instructions.
+   *     This can be solved by loading the font without FT_LOAD_NO_SCALE and
+   *     setting the character size to `font->units_per_EM'.
+   *
    *   FT_LOAD_NO_HINTING ::
-   *     Disable hinting.  This generally generates `blurrier' bitmap glyph
-   *     when the glyph is rendered in any of the anti-aliased modes.  See
+   *     Disable hinting.  This generally generates `blurrier' bitmap glyphs
+   *     when the glyph are rendered in any of the anti-aliased modes.  See
    *     also the note below.
    *
    *     This flag is implied by @FT_LOAD_NO_SCALE.
@@ -2439,8 +2459,14 @@ FT_BEGIN_HEADER
    *     @FT_LOAD_NO_SCALE always sets this flag.
    *
    *   FT_LOAD_VERTICAL_LAYOUT ::
-   *     Load the glyph for vertical text layout.  _Don't_ use it as it is
-   *     problematic currently.
+   *     Load the glyph for vertical text layout.  In particular, the
+   *     `advance' value in the @FT_GlyphSlotRec structure is set to the
+   *     `vertAdvance' value of the `metrics' field.
+   *
+   *     In case @FT_HAS_VERTICAL doesn't return true, you shouldn't use
+   *     this flag currently.  Reason is that in this case vertical metrics
+   *     get synthesized, and those values are not always consistent across
+   *     various font formats.
    *
    *   FT_LOAD_FORCE_AUTOHINT ::
    *     Indicates that the auto-hinter is preferred over the font's native
@@ -3401,9 +3427,13 @@ FT_BEGIN_HEADER
   /*    code range for CJK characters.                                     */
   /*                                                                       */
   /*    An IVS is registered and unique; for further details please refer  */
-  /*    to Unicode Technical Report #37, the Ideographic Variation         */
-  /*    Database.  To date (October 2007), the character with the most     */
-  /*    variants is U+908A, having 8~such IVS.                             */
+  /*    to Unicode Technical Standard #37, the Ideographic Variation       */
+  /*    Database:                                                          */
+  /*                                                                       */
+  /*      http://www.unicode.org/reports/tr37/                             */
+  /*                                                                       */
+  /*    To date (November 2012), the character with the most variants is   */
+  /*    U+9089, having 31 such IVS.                                        */
   /*                                                                       */
   /*    Adobe and MS decided to support IVS with a new cmap subtable       */
   /*    (format~14).  It is an odd subtable because it is not a mapping of */
@@ -3668,7 +3698,7 @@ FT_BEGIN_HEADER
   /* <Description>                                                         */
   /*    A very simple function used to perform the computation             */
   /*    `(a*b)/0x10000' with maximum accuracy.  Most of the time this is   */
-  /*    used to multiply a given value by a 16.16 fixed float factor.      */
+  /*    used to multiply a given value by a 16.16 fixed-point factor.      */
   /*                                                                       */
   /* <Input>                                                               */
   /*    a :: The first multiplier.                                         */
@@ -3713,7 +3743,7 @@ FT_BEGIN_HEADER
   /* <Description>                                                         */
   /*    A very simple function used to perform the computation             */
   /*    `(a*0x10000)/b' with maximum accuracy.  Most of the time, this is  */
-  /*    used to divide a given value by a 16.16 fixed float factor.        */
+  /*    used to divide a given value by a 16.16 fixed-point factor.        */
   /*                                                                       */
   /* <Input>                                                               */
   /*    a :: The first multiplier.                                         */
@@ -3852,7 +3882,7 @@ FT_BEGIN_HEADER
    */
 #define FREETYPE_MAJOR  2
 #define FREETYPE_MINOR  4
-#define FREETYPE_PATCH  10
+#define FREETYPE_PATCH  12
 
 
   /*************************************************************************/

data/vendor/local/include/freetype2/freetype/ftautoh.h

@@ -0,0 +1,349 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftautoh.h                                                              */
+/*                                                                         */
+/*    FreeType API for controlling the auto-hinter (specification only).   */
+/*                                                                         */
+/*  Copyright 2012 by                                                      */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTAUTOH_H__
+#define __FTAUTOH_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /**************************************************************************
+   *
+   * @section:
+   *   auto_hinter
+   *
+   * @title:
+   *   The auto-hinter
+   *
+   * @abstract:
+   *   Controlling the auto-hinting module.
+   *
+   * @description:
+   *   While FreeType's auto-hinter doesn't expose API functions by itself,
+   *   it is possible to control its behaviour with @FT_Property_Set and
+   *   @FT_Property_Get.  The following lists the available properties
+   *   together with the necessary macros and structures.
+   *
+   *   Note that the auto-hinter's module name is `autofitter' for
+   *   historical reasons.
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   glyph-to-script-map
+   *
+   * @description:
+   *   The auto-hinter provides various script modules to hint glyphs.
+   *   Examples of supported scripts are Latin or CJK.  Before a glyph is
+   *   auto-hinted, the Unicode character map of the font gets examined, and
+   *   the script is then determined based on Unicode character ranges, see
+   *   below.
+   *
+   *   OpenType fonts, however, often provide much more glyphs than
+   *   character codes (small caps, superscripts, ligatures, swashes, etc.),
+   *   to be controlled by so-called `features'.  Handling OpenType features
+   *   can be quite complicated and thus needs a separate library on top of
+   *   FreeType.
+   *
+   *   The mapping between glyph indices and scripts (in the auto-hinter
+   *   sense, see the @FT_AUTOHINTER_SCRIPT_XXX values) is stored as an
+   *   array with `num_glyphs' elements, as found in the font's @FT_Face
+   *   structure.  The `glyph-to-script-map' property returns a pointer to
+   *   this array which can be modified as needed.  Note that the
+   *   modification should happen before the first glyph gets processed by
+   *   the auto-hinter so that the global analysis of the font shapes
+   *   actually uses the modified mapping.
+   *
+   *   The following example code demonstrates how to access it (omitting
+   *   the error handling).
+   *
+   *   {
+   *     FT_Library                library;
+   *     FT_Face                   face;
+   *     FT_Prop_GlyphToScriptMap  prop;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *     FT_New_Face( library, "foo.ttf", 0, &face );
+   *
+   *     prop.face = face;
+   *
+   *     FT_Property_Get( library, "autofitter",
+   *                               "glyph-to-script-map", &prop );
+   *
+   *     // adjust `prop.map' as needed right here
+   *
+   *     FT_Load_Glyph( face, ..., FT_LOAD_FORCE_AUTOHINT );
+   *   }
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @enum:
+   *   FT_AUTOHINTER_SCRIPT_XXX
+   *
+   * @description:
+   *   A list of constants used for the @glyph-to-script-map property to
+   *   specify the script submodule the auto-hinter should use for hinting a
+   *   particular glyph.
+   *
+   * @values:
+   *   FT_AUTOHINTER_SCRIPT_NONE ::
+   *     Don't auto-hint this glyph.
+   *
+   *   FT_AUTOHINTER_SCRIPT_LATIN ::
+   *     Apply the latin auto-hinter.  For the auto-hinter, `latin' is a
+   *     very broad term, including Cyrillic and Greek also since characters
+   *     from those scripts share the same design constraints.
+   *
+   *     By default, characters from the following Unicode ranges are
+   *     assigned to this submodule.
+   *
+   *     {
+   *       U+0020 - U+007F  // Basic Latin (no control characters)
+   *       U+00A0 - U+00FF  // Latin-1 Supplement (no control characters)
+   *       U+0100 - U+017F  // Latin Extended-A
+   *       U+0180 - U+024F  // Latin Extended-B
+   *       U+0250 - U+02AF  // IPA Extensions
+   *       U+02B0 - U+02FF  // Spacing Modifier Letters
+   *       U+0300 - U+036F  // Combining Diacritical Marks
+   *       U+0370 - U+03FF  // Greek and Coptic
+   *       U+0400 - U+04FF  // Cyrillic
+   *       U+0500 - U+052F  // Cyrillic Supplement
+   *       U+1D00 - U+1D7F  // Phonetic Extensions
+   *       U+1D80 - U+1DBF  // Phonetic Extensions Supplement
+   *       U+1DC0 - U+1DFF  // Combining Diacritical Marks Supplement
+   *       U+1E00 - U+1EFF  // Latin Extended Additional
+   *       U+1F00 - U+1FFF  // Greek Extended
+   *       U+2000 - U+206F  // General Punctuation
+   *       U+2070 - U+209F  // Superscripts and Subscripts
+   *       U+20A0 - U+20CF  // Currency Symbols
+   *       U+2150 - U+218F  // Number Forms
+   *       U+2460 - U+24FF  // Enclosed Alphanumerics
+   *       U+2C60 - U+2C7F  // Latin Extended-C
+   *       U+2DE0 - U+2DFF  // Cyrillic Extended-A
+   *       U+2E00 - U+2E7F  // Supplemental Punctuation
+   *       U+A640 - U+A69F  // Cyrillic Extended-B
+   *       U+A720 - U+A7FF  // Latin Extended-D
+   *       U+FB00 - U+FB06  // Alphab. Present. Forms (Latin Ligatures)
+   *      U+1D400 - U+1D7FF // Mathematical Alphanumeric Symbols
+   *      U+1F100 - U+1F1FF // Enclosed Alphanumeric Supplement
+   *     }
+   *
+   *   FT_AUTOHINTER_SCRIPT_CJK ::
+   *     Apply the CJK auto-hinter, covering Chinese, Japanese, Korean, old
+   *     Vietnamese, and some other scripts.
+   *
+   *     By default, characters from the following Unicode ranges are
+   *     assigned to this submodule.
+   *
+   *     {
+   *       U+1100 - U+11FF  // Hangul Jamo
+   *       U+2E80 - U+2EFF  // CJK Radicals Supplement
+   *       U+2F00 - U+2FDF  // Kangxi Radicals
+   *       U+2FF0 - U+2FFF  // Ideographic Description Characters
+   *       U+3000 - U+303F  // CJK Symbols and Punctuation
+   *       U+3040 - U+309F  // Hiragana
+   *       U+30A0 - U+30FF  // Katakana
+   *       U+3100 - U+312F  // Bopomofo
+   *       U+3130 - U+318F  // Hangul Compatibility Jamo
+   *       U+3190 - U+319F  // Kanbun
+   *       U+31A0 - U+31BF  // Bopomofo Extended
+   *       U+31C0 - U+31EF  // CJK Strokes
+   *       U+31F0 - U+31FF  // Katakana Phonetic Extensions
+   *       U+3200 - U+32FF  // Enclosed CJK Letters and Months
+   *       U+3300 - U+33FF  // CJK Compatibility
+   *       U+3400 - U+4DBF  // CJK Unified Ideographs Extension A
+   *       U+4DC0 - U+4DFF  // Yijing Hexagram Symbols
+   *       U+4E00 - U+9FFF  // CJK Unified Ideographs
+   *       U+A960 - U+A97F  // Hangul Jamo Extended-A
+   *       U+AC00 - U+D7AF  // Hangul Syllables
+   *       U+D7B0 - U+D7FF  // Hangul Jamo Extended-B
+   *       U+F900 - U+FAFF  // CJK Compatibility Ideographs
+   *       U+FE10 - U+FE1F  // Vertical forms
+   *       U+FE30 - U+FE4F  // CJK Compatibility Forms
+   *       U+FF00 - U+FFEF  // Halfwidth and Fullwidth Forms
+   *      U+1B000 - U+1B0FF // Kana Supplement
+   *      U+1D300 - U+1D35F // Tai Xuan Hing Symbols
+   *      U+1F200 - U+1F2FF // Enclosed Ideographic Supplement
+   *      U+20000 - U+2A6DF // CJK Unified Ideographs Extension B
+   *      U+2A700 - U+2B73F // CJK Unified Ideographs Extension C
+   *      U+2B740 - U+2B81F // CJK Unified Ideographs Extension D
+   *      U+2F800 - U+2FA1F // CJK Compatibility Ideographs Supplement
+   *     }
+   *
+   *   FT_AUTOHINTER_SCRIPT_INDIC ::
+   *     Apply the indic auto-hinter, covering all major scripts from the
+   *     Indian sub-continent and some other related scripts like Thai, Lao,
+   *     or Tibetan.
+   *
+   *     By default, characters from the following Unicode ranges are
+   *     assigned to this submodule.
+   *
+   *     {
+   *       U+0900 - U+0DFF  // Indic Range
+   *       U+0F00 - U+0FFF  // Tibetan
+   *       U+1900 - U+194F  // Limbu
+   *       U+1B80 - U+1BBF  // Sundanese
+   *       U+1C80 - U+1CDF  // Meetei Mayak
+   *       U+A800 - U+A82F  // Syloti Nagri
+   *      U+11800 - U+118DF // Sharada
+   *     }
+   *
+   *     Note that currently Indic support is rudimentary only, missing blue
+   *     zone support.
+   *
+   */
+#define FT_AUTOHINTER_SCRIPT_NONE   0
+#define FT_AUTOHINTER_SCRIPT_LATIN  1
+#define FT_AUTOHINTER_SCRIPT_CJK    2
+#define FT_AUTOHINTER_SCRIPT_INDIC  3
+
+
+  /**************************************************************************
+   *
+   * @struct:
+   *   FT_Prop_GlyphToScriptMap
+   *
+   * @description:
+   *   The data exchange structure for the @glyph-to-script-map property.
+   *
+   */
+   typedef struct  FT_Prop_GlyphToScriptMap_
+   {
+     FT_Face   face;
+     FT_Byte*  map;
+
+   } FT_Prop_GlyphToScriptMap;
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   fallback-script
+   *
+   * @description:
+   *   If no auto-hinter script module can be assigned to a glyph, a
+   *   fallback script gets assigned to it (see also the
+   *   @glyph-to-script-map property).  By default, this is
+   *   @FT_AUTOHINTER_SCRIPT_CJK.  Using the `fallback-script' property,
+   *   this fallback value can be changed.
+   *
+   *   {
+   *     FT_Library  library;
+   *     FT_UInt     fallback_script = FT_AUTOHINTER_SCRIPT_NONE;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *
+   *     FT_Property_Set( library, "autofitter",
+   *                               "fallback-script", &fallback_script );
+   *   }
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   *   It's important to use the right timing for changing this value: The
+   *   creation of the glyph-to-script map which eventually uses the
+   *   fallback script value gets triggered either by setting or reading a
+   *   face-specific property like @glyph-to-script-map, or by auto-hinting
+   *   any glyph from that face.  In particular, if you have already created
+   *   an @FT_Face structure but not loaded any glyph (using the
+   *   auto-hinter), a change of the fallback glyph will affect this face.
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   increase-x-height
+   *
+   * @description:
+   *   For ppem values in the range 6~<= ppem <= `increase-x-height', round
+   *   up the font's x~height much more often than normally.  If the value
+   *   is set to~0, which is the default, this feature is switched off.  Use
+   *   this property to improve the legibility of small font sizes if
+   *   necessary.
+   *
+   *   {
+   *     FT_Library               library;
+   *     FT_Face                  face;
+   *     FT_Prop_IncreaseXHeight  prop;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *     FT_New_Face( library, "foo.ttf", 0, &face );
+   *     FT_Set_Char_Size( face, 10 * 64, 0, 72, 0 );
+   *
+   *     prop.face  = face;
+   *     prop.limit = 14;
+   *
+   *     FT_Property_Set( library, "autofitter",
+   *                               "increase-x-height", &prop );
+   *   }
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   *   Set this value right after calling @FT_Set_Char_Size, but before
+   *   loading any glyph (using the auto-hinter).
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @struct:
+   *   FT_Prop_IncreaseXHeight
+   *
+   * @description:
+   *   The data exchange structure for the @increase-x-height property.
+   *
+   */
+   typedef struct  FT_Prop_IncreaseXHeight_
+   {
+     FT_Face  face;
+     FT_UInt  limit;
+
+   } FT_Prop_IncreaseXHeight;
+
+
+ /* */
+
+FT_END_HEADER
+
+#endif /* __FTAUTOH_H__ */
+
+
+/* END */