bundler 1.13.6 → 1.17.3

data/man/gemfile.5.ronn

@@ -30,12 +30,12 @@ Sources are checked for gems following the heuristics described in
 will print a warning after installing the gem indicating which source was used,
 and listing the other sources where the gem is available. A specific source can
 be selected for gems that need to use a non-standard repository, suppressing
-this warning, by using the [`:source` option](#SOURCE-source-) or a
+this warning, by using the [`:source` option](#SOURCE) or a
 [`source` block](#BLOCK-FORM-OF-SOURCE-GIT-PATH-GROUP-and-PLATFORMS).
 
 ### CREDENTIALS
 
-Some gem sources require a username and password. Use [bundle config(1)][bundle-config] to set
+Some gem sources require a username and password. Use [bundle config(1)](bundle-config.1.html) to set
 the username and password for any of the sources that need it. The command must
 be run once on each computer that will install the Gemfile, but this keeps the
 credentials from being stored in plain text in version control.
@@ -59,8 +59,8 @@ All parameters are `OPTIONAL` unless otherwise specified.
 ### VERSION (required)
 
 The version of Ruby that your application requires. If your application
-requires an alternate Ruby engine, such as JRuby or Rubinius, this should be
-the Ruby version that the engine is compatible with.
+requires an alternate Ruby engine, such as JRuby, Rubinius or TruffleRuby, this
+should be the Ruby version that the engine is compatible with.
 
     ruby "1.9.3"
 
@@ -69,6 +69,22 @@ the Ruby version that the engine is compatible with.
 Each application _may_ specify a Ruby engine. If an engine is specified, an
 engine version _must_ also be specified.
 
+What exactly is an Engine?
+  - A Ruby engine is an implementation of the Ruby language.
+
+  - For background: the reference or original implementation of the Ruby
+    programming language is called
+    [Matz's Ruby Interpreter](https://en.wikipedia.org/wiki/Ruby_MRI), or  MRI
+    for short. This is named after Ruby creator Yukihiro Matsumoto,
+    also known as Matz. MRI is also known as CRuby, because it is written in C.
+    MRI is the most widely used Ruby engine.
+
+  - [Other implementations](https://www.ruby-lang.org/en/about/) of Ruby exist.
+    Some of the more well-known implementations include
+    [Rubinius](https://rubinius.com/), and [JRuby](http://jruby.org/).
+    Rubinius is an alternative implementation of Ruby written in Ruby.
+    JRuby is an implementation of Ruby on the JVM, short for Java Virtual Machine.
+
 ### ENGINE VERSION
 
 Each application _may_ specify a Ruby engine version. If an engine version is
@@ -172,63 +188,41 @@ platforms.
 There are a number of `Gemfile` platforms:
 
   * `ruby`:
-    C Ruby (MRI) or Rubinius, but `NOT` Windows
-  * `ruby_18`:
-    _ruby_ `AND` version 1.8
-  * `ruby_19`:
-    _ruby_ `AND` version 1.9
-  * `ruby_20`:
-    _ruby_ `AND` version 2.0
-  * `ruby_21`:
-    _ruby_ `AND` version 2.1
-  * `ruby_22`:
-    _ruby_ `AND` version 2.2
-  * `ruby_23`:
-    _ruby_ `AND` version 2.3
+    C Ruby (MRI), Rubinius or TruffleRuby, but `NOT` Windows
   * `mri`:
-    Same as _ruby_, but not Rubinius
-  * `mri_18`:
-    _mri_ `AND` version 1.8
-  * `mri_19`:
-    _mri_ `AND` version 1.9
-  * `mri_20`:
-    _mri_ `AND` version 2.0
-  * `mri_21`:
-    _mri_ `AND` version 2.1
-  * `mri_22`:
-    _mri_ `AND` version 2.2
-  * `mri_23`:
-    _mri_ `AND` version 2.3
+    Same as _ruby_, but only C Ruby (MRI)
+  * `mingw`:
+    Windows 32 bit 'mingw32' platform (aka RubyInstaller)
+  * `x64_mingw`:
+    Windows 64 bit 'mingw32' platform (aka RubyInstaller x64)
   * `rbx`:
-    Same as _ruby_, but only Rubinius (not MRI)
+    Rubinius
   * `jruby`:
     JRuby
+  * `truffleruby`:
+    TruffleRuby
   * `mswin`:
     Windows
+
+You can restrict further by platform and version for all platforms *except* for
+`rbx`, `jruby`, `truffleruby` and `mswin`.
+
+To specify a version in addition to a platform, append the version number without
+the delimiter to the platform. For example, to specify that a gem should only be
+used on platforms with Ruby 2.3, use:
+
+    ruby_23
+
+The full list of platforms and supported versions includes:
+
+  * `ruby`:
+    1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
+  * `mri`:
+    1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
   * `mingw`:
-    Windows 32 bit 'mingw32' platform (aka RubyInstaller)
-  * `mingw_18`:
-    _mingw_ `AND` version 1.8
-  * `mingw_19`:
-    _mingw_ `AND` version 1.9
-  * `mingw_20`:
-    _mingw_ `AND` version 2.0
-  * `mingw_21`:
-    _mingw_ `AND` version 2.1
-  * `mingw_22`:
-    _mingw_ `AND` version 2.2
-  * `mingw_23`:
-    _mingw_ `AND` version 2.3
+    1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
   * `x64_mingw`:
-    Windows 64 bit 'mingw32' platform (aka RubyInstaller x64)
-  * `x64_mingw_20`:
-    _x64_mingw_ `AND` version 2.0
-  * `x64_mingw_21`:
-    _x64_mingw_ `AND` version 2.1
-  * `x64_mingw_22`:
-    _x64_mingw_ `AND` version 2.2
-  * `x64_mingw_23`:
-    _x64_mingw_ `AND` version 2.3
+    2.0, 2.1, 2.2, 2.3, 2.4, 2.5
 
 As with groups, you can specify one or more platforms:
 
@@ -236,7 +230,7 @@ As with groups, you can specify one or more platforms:
     gem "ruby-debug", :platforms => :mri_18
     gem "nokogiri",   :platforms => [:mri_18, :jruby]
 
-All operations involving groups (`bundle install`, `Bundler.setup`,
+All operations involving groups ([`bundle install`](bundle-install.1.html), `Bundler.setup`,
 `Bundler.require`) behave exactly the same as if any groups not
 matching the current platform were explicitly excluded.
 
@@ -257,7 +251,13 @@ back on global sources using the ordering described in [SOURCE PRIORITY][].
 
 Selecting a specific source repository this way also suppresses the ambiguous
 gem warning described above in
-[GLOBAL SOURCES (#source)](#GLOBAL-SOURCES-source-).
+[GLOBAL SOURCES (#source)](#GLOBAL-SOURCES).
+
+Using the `:source` option for an individual gem will also make that source
+available as a possible global source for any other gems which do not specify
+explicit sources. Thus, when adding gems with explicit sources, it is
+recommended that you also ensure all other gems in the Gemfile are using
+explicit sources.
 
 ### GIT
 
@@ -311,7 +311,17 @@ Git repositories support a number of additional options.
   * `branch`, `tag`, and `ref`:
     You `MUST` only specify at most one of these options. The default
     is `:branch => "master"`
+  * For example:
+
+      git "https://github.com/rails/rails.git", :branch => "5-0-stable" do
+
+      git "https://github.com/rails/rails.git", :tag => "v5.0.0" do
+
+      git "https://github.com/rails/rails.git", :ref => "4aded" do
+
   * `submodules`:
+    For reference, a [git submodule](https://git-scm.com/book/en/v2/Git-Tools-Submodules)
+    lets you have another git repository within a subfolder of your repository.
     Specify `:submodules => true` to cause bundler to expand any
     submodules included in the git repository
 
@@ -451,6 +461,13 @@ In the case of the `git` block form, the `:ref`, `:branch`, `:tag`,
 and `:submodules` options may be passed to the `git` method, and
 all gems in the block will inherit those options.
 
+The presence of a `source` block in a Gemfile also makes that source
+available as a possible global source for any other gems which do not specify
+explicit sources. Thus, when defining source blocks, it is
+recommended that you also ensure all other gems in the Gemfile are using
+explicit sources, either via source blocks or `:source` directives on
+individual gems.
+
 ## INSTALL_IF
 
 The `install_if` method allows gems to be installed based on a proc or lambda.
@@ -463,6 +480,11 @@ software is installed or some other conditions are met.
 
 ## GEMSPEC
 
+The [`.gemspec`](http://guides.rubygems.org/specification-reference/) file is where
+ you provide metadata about your gem to Rubygems. Some required Gemspec
+ attributes include the name, description, and homepage of your gem. This is
+ also where you specify the dependencies your gem needs to run.
+
 If you wish to use Bundler to help install dependencies for a gem while it is
 being developed, use the `gemspec` method to pull in the dependencies listed in
 the `.gemspec` file.

data/man/gemfile.5.txt

@@ -0,0 +1,653 @@
+GEMFILE(5)							    GEMFILE(5)
+
+
+
+NAME
+       Gemfile - A format for describing gem dependencies for Ruby programs
+
+SYNOPSIS
+       A Gemfile describes the gem dependencies required to execute associated
+       Ruby code.
+
+       Place the Gemfile in the root of the directory containing  the  associ-
+       ated  code.  For instance, in a Rails application, place the Gemfile in
+       the same directory as the Rakefile.
+
+SYNTAX
+       A Gemfile is evaluated as Ruby code, in a context which makes available
+       a number of methods used to describe the gem requirements.
+
+GLOBAL SOURCES
+       At the top of the Gemfile, add a line for the Rubygems source that con-
+       tains the gems listed in the Gemfile.
+
+
+
+	   source "https://rubygems.org"
+
+
+
+       It is possible, but not recommended as of Bundler 1.7, to add  multiple
+       global  source  lines.  Each  of these sources MUST be a valid Rubygems
+       repository.
+
+       Sources are checked for gems  following	the  heuristics  described  in
+       SOURCE  PRIORITY.  If  a  gem  is found in more than one global source,
+       Bundler will print a warning after installing the gem indicating  which
+       source  was used, and listing the other sources where the gem is avail-
+       able. A specific source can be selected for gems that  need  to	use  a
+       non-standard repository, suppressing this warning, by using the :source
+       option or a source block.
+
+   CREDENTIALS
+       Some gem sources require a username and password. Use bundle  config(1)
+       bundle-config.1.html  to  set  the username and password for any of the
+       sources that need it. The command must be run  once  on	each  computer
+       that  will  install  the  Gemfile,  but this keeps the credentials from
+       being stored in plain text in version control.
+
+
+
+	   bundle config gems.example.com user:password
+
+
+
+       For some sources, like a company Gemfury account, it may be  easier  to
+       include the credentials in the Gemfile as part of the source URL.
+
+
+
+	   source "https://user:password@gems.example.com"
+
+
+
+       Credentials in the source URL will take precedence over credentials set
+       using config.
+
+RUBY
+       If your application requires a specific Ruby version or engine, specify
+       your  requirements using the ruby method, with the following arguments.
+       All parameters are OPTIONAL unless otherwise specified.
+
+   VERSION (required)
+       The version of Ruby that your application requires. If your application
+       requires  an  alternate	Ruby  engine, such as JRuby, Rubinius or Truf-
+       fleRuby, this should be the Ruby version that the engine is  compatible
+       with.
+
+
+
+	   ruby "1.9.3"
+
+
+
+   ENGINE
+       Each  application may specify a Ruby engine. If an engine is specified,
+       an engine version must also be specified.
+
+       What exactly is an Engine? - A Ruby engine is an implementation of  the
+       Ruby language.
+
+       o   For	background:  the  reference  or original implementation of the
+	   Ruby  programming  language	is  called  Matz's  Ruby   Interpreter
+	   https://en.wikipedia.org/wiki/Ruby_MRI,  or	MRI for short. This is
+	   named after Ruby creator Yukihiro Matsumoto, also  known  as  Matz.
+	   MRI	is also known as CRuby, because it is written in C. MRI is the
+	   most widely used Ruby engine.
+
+       o   Other implementations https://www.ruby-lang.org/en/about/  of  Ruby
+	   exist. Some of the more well-known implementations include Rubinius
+	   https://rubinius.com/, and JRuby http://jruby.org/. Rubinius is  an
+	   alternative	implementation	of  Ruby  written in Ruby. JRuby is an
+	   implementation of Ruby on the JVM, short for Java Virtual  Machine.
+
+
+
+   ENGINE VERSION
+       Each  application  may specify a Ruby engine version. If an engine ver-
+       sion is specified, an engine must also be specified. If the  engine  is
+       "ruby" the engine version specified must match the Ruby version.
+
+
+
+	   ruby "1.8.7", :engine => "jruby", :engine_version => "1.6.7"
+
+
+
+   PATCHLEVEL
+       Each application may specify a Ruby patchlevel.
+
+
+
+	   ruby "2.0.0", :patchlevel => "247"
+
+
+
+GEMS
+       Specify gem requirements using the gem method, with the following argu-
+       ments. All parameters are OPTIONAL unless otherwise specified.
+
+   NAME (required)
+       For each gem requirement, list a single gem line.
+
+
+
+	   gem "nokogiri"
+
+
+
+   VERSION
+       Each gem MAY have one or more version specifiers.
+
+
+
+	   gem "nokogiri", ">= 1.4.2"
+	   gem "RedCloth", ">= 4.1.0", "< 4.2.0"
+
+
+
+   REQUIRE AS
+       Each gem MAY specify files that should be used when  autorequiring  via
+       Bundler.require.  You  may pass an array with multiple files or true if
+       file you want required has same name as gem or  false  to  prevent  any
+       file from being autorequired.
+
+
+
+	   gem "redis", :require => ["redis/connection/hiredis", "redis"]
+	   gem "webmock", :require => false
+	   gem "debugger", :require => true
+
+
+
+       The  argument  defaults	to the name of the gem. For example, these are
+       identical:
+
+
+
+	   gem "nokogiri"
+	   gem "nokogiri", :require => "nokogiri"
+	   gem "nokogiri", :require => true
+
+
+
+   GROUPS
+       Each gem MAY specify membership in one or more  groups.	Any  gem  that
+       does  not  specify  membership  in  any	group is placed in the default
+       group.
+
+
+
+	   gem "rspec", :group => :test
+	   gem "wirble", :groups => [:development, :test]
+
+
+
+       The Bundler runtime allows its  two  main  methods,  Bundler.setup  and
+       Bundler.require, to limit their impact to particular groups.
+
+
+
+	   # setup adds gems to Ruby's load path
+	   Bundler.setup		    # defaults to all groups
+	   require "bundler/setup"	    # same as Bundler.setup
+	   Bundler.setup(:default)	    # only set up the _default_ group
+	   Bundler.setup(:test) 	    # only set up the _test_ group (but `not` _default_)
+	   Bundler.setup(:default, :test)   # set up the _default_ and _test_ groups, but no others
+
+	   # require requires all of the gems in the specified groups
+	   Bundler.require		    # defaults to the _default_ group
+	   Bundler.require(:default)	    # identical
+	   Bundler.require(:default, :test) # requires the _default_ and _test_ groups
+	   Bundler.require(:test)	    # requires the _test_ group
+
+
+
+       The  Bundler CLI allows you to specify a list of groups whose gems bun-
+       dle install should not install with the --without  option.  To  specify
+       multiple  groups  to ignore, specify a list of groups separated by spa-
+       ces.
+
+
+
+	   bundle install --without test
+	   bundle install --without development test
+
+
+
+       After running bundle install --without test, bundler will remember that
+       you excluded the test group in the last installation. The next time you
+       run bundle install, without any --without option, bundler  will	recall
+       it.
+
+       Also,  calling  Bundler.setup  with  no	parameters, or calling require
+       "bundler/setup" will setup all groups except for the ones you  excluded
+       via --without (since they are not available).
+
+       Note  that on bundle install, bundler downloads and evaluates all gems,
+       in order to create a single canonical list of all of the required  gems
+       and  their dependencies. This means that you cannot list different ver-
+       sions of the same gems in  different  groups.  For  more  details,  see
+       Understanding Bundler http://bundler.io/rationale.html.
+
+   PLATFORMS
+       If  a  gem should only be used in a particular platform or set of plat-
+       forms, you can specify them. Platforms  are  essentially  identical  to
+       groups,	except	that you do not need to use the --without install-time
+       flag to exclude groups of gems for other platforms.
+
+       There are a number of Gemfile platforms:
+
+       ruby   C Ruby (MRI), Rubinius or TruffleRuby, but NOT Windows
+
+       mri    Same as ruby, but only C Ruby (MRI)
+
+       mingw  Windows 32 bit 'mingw32' platform (aka RubyInstaller)
+
+       x64_mingw
+	      Windows 64 bit 'mingw32' platform (aka RubyInstaller x64)
+
+       rbx    Rubinius
+
+       jruby  JRuby
+
+       truffleruby
+	      TruffleRuby
+
+       mswin  Windows
+
+       You can restrict further by platform  and  version  for	all  platforms
+       except for rbx, jruby, truffleruby and mswin.
+
+       To specify a version in addition to a platform, append the version num-
+       ber without the delimiter to the platform. For example, to specify that
+       a gem should only be used on platforms with Ruby 2.3, use:
+
+
+
+	   ruby_23
+
+
+
+       The full list of platforms and supported versions includes:
+
+       ruby   1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
+
+       mri    1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
+
+       mingw  1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
+
+       x64_mingw
+	      2.0, 2.1, 2.2, 2.3, 2.4, 2.5
+
+       As with groups, you can specify one or more platforms:
+
+
+
+	   gem "weakling",   :platforms => :jruby
+	   gem "ruby-debug", :platforms => :mri_18
+	   gem "nokogiri",   :platforms => [:mri_18, :jruby]
+
+
+
+       All  operations involving groups (bundle install bundle-install.1.html,
+       Bundler.setup, Bundler.require) behave  exactly	the  same  as  if  any
+       groups not matching the current platform were explicitly excluded.
+
+   SOURCE
+       You  can  select  an  alternate Rubygems repository for a gem using the
+       ':source' option.
+
+
+
+	   gem "some_internal_gem", :source => "https://gems.example.com"
+
+
+
+       This forces the gem to be loaded  from  this  source  and  ignores  any
+       global  sources	declared at the top level of the file. If the gem does
+       not exist in this source, it will not be installed.
+
+       Bundler will search for child dependencies of this gem by first looking
+       in the source selected for the parent, but if they are not found there,
+       it will fall back on global sources using  the  ordering  described  in
+       SOURCE PRIORITY.
+
+       Selecting  a  specific  source  repository this way also suppresses the
+       ambiguous gem warning described above in GLOBAL SOURCES (#source).
+
+       Using the :source option for an individual  gem	will  also  make  that
+       source  available  as a possible global source for any other gems which
+       do not specify explicit sources. Thus, when adding gems	with  explicit
+       sources,  it  is recommended that you also ensure all other gems in the
+       Gemfile are using explicit sources.
+
+   GIT
+       If necessary, you can specify that a gem is located at a particular git
+       repository using the :git parameter. The repository can be accessed via
+       several protocols:
+
+       HTTP(S)
+	      gem "rails", :git => "https://github.com/rails/rails.git"
+
+       SSH    gem "rails", :git => "git@github.com:rails/rails.git"
+
+       git    gem "rails", :git => "git://github.com/rails/rails.git"
+
+       If using SSH, the user that you use to run bundle install MUST have the
+       appropriate keys available in their $HOME/.ssh.
+
+       NOTE:  http://  and  git://  URLs should be avoided if at all possible.
+       These protocols are unauthenticated, so	a  man-in-the-middle  attacker
+       can  deliver  malicious	code and compromise your system. HTTPS and SSH
+       are strongly preferred.
+
+       The group, platforms, and require  options  are	available  and	behave
+       exactly the same as they would for a normal gem.
+
+       A  git  repository  SHOULD  have  at least one file, at the root of the
+       directory containing the gem, with the extension  .gemspec.  This  file
+       MUST  contain  a  valid gem specification, as expected by the gem build
+       command.
+
+       If a git repository does not have a .gemspec, bundler will  attempt  to
+       create one, but it will not contain any dependencies, executables, or C
+       extension compilation instructions. As a result, it may fail  to  prop-
+       erly integrate into your application.
+
+       If  a  git  repository does have a .gemspec for the gem you attached it
+       to, a version specifier, if provided, means that the git repository  is
+       only  valid  if	the  .gemspec specifies a version matching the version
+       specifier. If not, bundler will print a warning.
+
+
+
+	   gem "rails", "2.3.8", :git => "https://github.com/rails/rails.git"
+	   # bundle install will fail, because the .gemspec in the rails
+	   # repository's master branch specifies version 3.0.0
+
+
+
+       If a git repository does not have a .gemspec for the gem  you  attached
+       it to, a version specifier MUST be provided. Bundler will use this ver-
+       sion in the simple .gemspec it creates.
+
+       Git repositories support a number of additional options.
+
+       branch, tag, and ref
+	      You MUST only specify at most one of these options. The  default
+	      is :branch => "master"
+
+       For example:
+
+	      git  "https://github.com/rails/rails.git",  :branch => "5-0-sta-
+	      ble" do
+
+	      git "https://github.com/rails/rails.git", :tag => "v5.0.0" do
+
+	      git "https://github.com/rails/rails.git", :ref => "4aded" do
+
+       submodules
+	      For	  reference,	     a		git	     submodule
+	      https://git-scm.com/book/en/v2/Git-Tools-Submodules   lets   you
+	      have another git repository within a subfolder of  your  reposi-
+	      tory. Specify :submodules => true to cause bundler to expand any
+	      submodules included in the git repository
+
+       If a git repository contains multiple .gemspecs, each  .gemspec	repre-
+       sents  a  gem located at the same place in the file system as the .gem-
+       spec.
+
+
+
+	   |~rails		     [git root]
+	   | |-rails.gemspec	     [rails gem located here]
+	   |~actionpack
+	   | |-actionpack.gemspec    [actionpack gem located here]
+	   |~activesupport
+	   | |-activesupport.gemspec [activesupport gem located here]
+	   |...
+
+
+
+       To install a gem located in a git repository, bundler  changes  to  the
+       directory  containing the gemspec, runs gem build name.gemspec and then
+       installs the resulting gem. The gem build command, which comes standard
+       with  Rubygems,	evaluates the .gemspec in the context of the directory
+       in which it is located.
+
+   GIT SOURCE
+       A custom git source can be defined via the git_source  method.  Provide
+       the  source's  name as an argument, and a block which receives a single
+       argument and interpolates it into a string  to  return  the  full  repo
+       address:
+
+
+
+	   git_source(:stash){ |repo_name| "https://stash.corp.acme.pl/#{repo_name}.git" }
+	   gem 'rails', :stash => 'forks/rails'
+
+
+
+       In addition, if you wish to choose a specific branch:
+
+
+
+	   gem "rails", :stash => "forks/rails", :branch => "branch_name"
+
+
+
+   GITHUB
+       NOTE: This shorthand should be avoided until Bundler 2.0, since it cur-
+       rently expands to an insecure git:// URL. This allows a man-in-the-mid-
+       dle attacker to compromise your system.
+
+       If  the	git repository you want to use is hosted on GitHub and is pub-
+       lic, you can use the :github shorthand to specify the  github  username
+       and  repository	name  (without	the  trailing  ".git"), separated by a
+       slash. If both the username and repository name are the same,  you  can
+       omit one.
+
+
+
+	   gem "rails", :github => "rails/rails"
+	   gem "rails", :github => "rails"
+
+
+
+       Are both equivalent to
+
+
+
+	   gem "rails", :git => "git://github.com/rails/rails.git"
+
+
+
+       Since the github method is a specialization of git_source, it accepts a
+       :branch named argument.
+
+   GIST
+       If the git repository you want to use is hosted as a Github Gist and is
+       public,	you can use the :gist shorthand to specify the gist identifier
+       (without the trailing ".git").
+
+
+
+	   gem "the_hatch", :gist => "4815162342"
+
+
+
+       Is equivalent to:
+
+
+
+	   gem "the_hatch", :git => "https://gist.github.com/4815162342.git"
+
+
+
+       Since the gist method is a specialization of git_source, it  accepts  a
+       :branch named argument.
+
+   BITBUCKET
+       If  the	git  repository  you want to use is hosted on Bitbucket and is
+       public, you can use the :bitbucket shorthand to specify	the  bitbucket
+       username  and  repository name (without the trailing ".git"), separated
+       by a slash. If both the username and repository name are the same,  you
+       can omit one.
+
+
+
+	   gem "rails", :bitbucket => "rails/rails"
+	   gem "rails", :bitbucket => "rails"
+
+
+
+       Are both equivalent to
+
+
+
+	   gem "rails", :git => "https://rails@bitbucket.org/rails/rails.git"
+
+
+
+       Since  the  bitbucket  method  is  a  specialization  of git_source, it
+       accepts a :branch named argument.
+
+   PATH
+       You can specify that a gem is located in a particular location  on  the
+       file system. Relative paths are resolved relative to the directory con-
+       taining the Gemfile.
+
+       Similar to the semantics of the :git option, the :path option  requires
+       that  the directory in question either contains a .gemspec for the gem,
+       or that you specify an explicit version that bundler should use.
+
+       Unlike :git, bundler does not compile C extensions for  gems  specified
+       as paths.
+
+
+
+	   gem "rails", :path => "vendor/rails"
+
+
+
+       If you would like to use multiple local gems directly from the filesys-
+       tem, you can set a global path option to the path containing the  gem's
+       files.  This will automatically load gemspec files from subdirectories.
+
+
+
+	   path 'components' do
+	     gem 'admin_ui'
+	     gem 'public_ui'
+	   end
+
+
+
+BLOCK FORM OF SOURCE, GIT, PATH, GROUP and PLATFORMS
+       The :source, :git, :path, :group, and :platforms options may be applied
+       to a group of gems by using block form.
+
+
+
+	   source "https://gems.example.com" do
+	     gem "some_internal_gem"
+	     gem "another_internal_gem"
+	   end
+
+	   git "https://github.com/rails/rails.git" do
+	     gem "activesupport"
+	     gem "actionpack"
+	   end
+
+	   platforms :ruby do
+	     gem "ruby-debug"
+	     gem "sqlite3"
+	   end
+
+	   group :development, :optional => true do
+	     gem "wirble"
+	     gem "faker"
+	   end
+
+
+
+       In  the	case of the group block form the :optional option can be given
+       to prevent a group from being installed unless  listed  in  the	--with
+       option given to the bundle install command.
+
+       In  the	case of the git block form, the :ref, :branch, :tag, and :sub-
+       modules options may be passed to the git method, and all  gems  in  the
+       block will inherit those options.
+
+       The  presence  of  a  source  block in a Gemfile also makes that source
+       available as a possible global source for any other gems which  do  not
+       specify explicit sources. Thus, when defining source blocks, it is rec-
+       ommended that you also ensure all other gems in the Gemfile  are  using
+       explicit  sources,  either  via	source blocks or :source directives on
+       individual gems.
+
+INSTALL_IF
+       The install_if method allows gems to be installed based on  a  proc  or
+       lambda.	This  is  especially useful for optional gems that can only be
+       used if certain software is installed or some other conditions are met.
+
+
+
+	   install_if -> { RUBY_PLATFORM =~ /darwin/ } do
+	     gem "pasteboard"
+	   end
+
+
+
+GEMSPEC
+       The  .gemspec  http://guides.rubygems.org/specification-reference/ file
+       is where you provide metadata about your gem to Rubygems. Some required
+       Gemspec	attributes include the name, description, and homepage of your
+       gem. This is also where you specify the dependencies your gem needs  to
+       run.
+
+       If you wish to use Bundler to help install dependencies for a gem while
+       it is being developed, use the gemspec method to pull in the  dependen-
+       cies listed in the .gemspec file.
+
+       The gemspec method adds any runtime dependencies as gem requirements in
+       the default  group.  It	also  adds  development  dependencies  as  gem
+       requirements  in the development group. Finally, it adds a gem require-
+       ment on your project (:path => '.'). In conjunction with Bundler.setup,
+       this allows you to require project files in your test code as you would
+       if the project were installed as a gem; you  need  not  manipulate  the
+       load path manually or require project files via relative paths.
+
+       The gemspec method supports optional :path, :glob, :name, and :develop-
+       ment_group options, which control where bundler looks for the .gemspec,
+       the  glob  it  uses  to look for the gemspec (defaults to: "{,,/*}.gem-
+       spec"), what named .gemspec it uses (if more than one is present),  and
+       which group development dependencies are included in.
+
+       When  a	gemspec dependency encounters version conflicts during resolu-
+       tion, the local version under development will always  be  selected  --
+       even  if there are remote versions that better match other requirements
+       for the gemspec gem.
+
+SOURCE PRIORITY
+       When attempting to locate a gem to satisfy a gem  requirement,  bundler
+       uses the following priority order:
+
+       1.  The source explicitly attached to the gem (using :source, :path, or
+	   :git)
+
+       2.  For implicit gems (dependencies of explicit gems), any source, git,
+	   or  path repository declared on the parent. This results in bundler
+	   prioritizing the ActiveSupport gem from the	Rails  git  repository
+	   over ones from rubygems.org
+
+       3.  The	sources  specified  via  global  source  lines, searching each
+	   source in your Gemfile from last added to first added.
+
+
+
+
+
+
+				 November 2018			    GEMFILE(5)