bolt 0.20.0 → 0.20.2

data/vendored/puppet/lib/puppet/datatypes.rb

@@ -0,0 +1,213 @@
+# Data types in the Puppet Language can have implementations written in Ruby
+# and distributed in puppet modules. A data type can be declared together with
+# its implementation by creating a file in 'lib/puppet/functions/<modulename>'.
+# The name of the file must be the downcased name of the data type followed by
+# the extension '.rb'.
+#
+# A data type is created by calling {Puppet::DataTypes.create_type(<type name>)}
+# and passing it a block that defines the data type interface and implementation.
+#
+# Data types are namespaced inside the modules that contains them. The name of the
+# data type is prefixed with the name of the module. As with all type names, each
+# segment of the name must start with an uppercase letter.
+#
+# @example A simple data type
+#   Puppet::DataTypes.create_type('Auth::User') do
+#     interface <<-PUPPET
+#       attributes => {
+#         name => String,
+#         email => String
+#       }
+#     PUPPET
+#   end
+#
+# The above example does not declare an implementation which makes it equivalent
+# to adding the following contents in a file named 'user.pp' under the 'types' directory
+# of the module root.
+#
+#   type Auth::User = Object[
+#     attributes => {
+#       name => String,
+#       email => String
+#     }]
+#
+# Both declarations are valid and will be found by the module loader.
+#
+# Structure of a data type
+# ---
+#
+# A Data Type consists of an interface and an implementation. Unless a registered implementation
+# is found, the type system will automatically generate one. An  automatically generated
+# implementation is all that is needed when the interface fully  defines the behaviour (for
+# example in the common case when the data type has no other behaviour than having attributes).
+#
+# When the automatically generated implementation is not sufficient, one must be implemented and
+# registered. The implementation can either be done next to the interface definition by passing
+# a block to `implementation`, or map to an existing implementation class by passing the class
+# as an argument to `implementation_class`. An implementation class does not have to be special
+# in other respects than that it must implemented the type's interface. This makes it possible
+# to use existing Ruby data types as data types in the puppet language.
+#
+# Note that when using `implementation_class` there can only be one such implementation across
+# all environments managed by one puppet server and you must handle and install these
+# implementations as if they are part of the puppet platform. In contrast; the type
+# implementations that are done inside of the type's definition are safe to use in different
+# versions in different environments (given that they do not need additional external logic to
+# be loaded).
+#
+# When using an `implementation_class` it is sometimes desirable to load this class from the
+# 'lib' directory of the module. The method `load_file` is provided to facilitate such a load.
+# The `load_file` will use the `Puppet::Util::Autoload` to search for the given file in the 'lib'
+# directory of the current environment and the 'lib' directory in each included module.
+#
+# @example Adding implementation on top of the generated type using `implementation`
+#   Puppet::DataTypes.create_type('Auth::User') do
+#     interface <<-PUPPET
+#       attributes => {
+#         name => String,
+#         email => String,
+#         year_of_birth => Integer,
+#         age => { type => Integer, kind => derived }
+#       }
+#       PUPPET
+#
+#     implementation do
+#       def age
+#         DateTime.now.year - @year_of_birth
+#       end
+#     end
+#   end
+#
+# @example Appointing an already existing implementation class
+#
+# Assumes the following class is declared under 'lib/puppetx/auth' in the module:
+#
+#   class PuppetX::Auth::User
+#     attr_reader :name, :year_of_birth
+#     def initialize(name, year_of_birth)
+#       @name = name
+#       @year_of_birth = year_of_birth
+#     end
+#
+#     def age
+#       DateTime.now.year - @year_of_birth
+#     end
+#
+#     def send_text(sender, text)
+#       sender.send_text_from(@name, text)
+#     end
+#   end
+#
+# Then the type declaration can look like this:
+#
+#   Puppet::DataTypes.create_type('Auth::User') do
+#     interface <<-PUPPET
+#       attributes => {
+#         name => String,
+#         email => String,
+#         year_of_birth => Integer,
+#         age => { type => Integer, kind => derived }
+#       },
+#       functions => {
+#         send_text => Callable[Sender, String[1]]
+#       }
+#       PUPPET
+#
+#     # This load_file is optional and only needed in case
+#     # the implementation is not loaded by other means.
+#     load_file 'puppetx/auth/user'
+#
+#     implementation_class PuppetX::Auth::User
+#   end
+#
+module Puppet::DataTypes
+  def self.create_type(type_name, &block)
+    # Ruby < 2.1.0 does not have method on Binding, can only do eval
+    # and it will fail unless protected with an if defined? if the local
+    # variable does not exist in the block's binder.
+    #
+    begin
+      loader = block.binding.eval('loader_injected_arg if defined?(loader_injected_arg)')
+      create_loaded_type(type_name, loader, &block)
+    rescue StandardError => e
+      raise ArgumentError, _("Data Type Load Error for type '%{type_name}': %{message}") % {type_name: type_name, message: e.message}
+    end
+
+  end
+
+  def self.create_loaded_type(type_name, loader, &block)
+    builder = TypeBuilder.new(type_name.to_s)
+    api = TypeBuilderAPI.new(builder).freeze
+    api.instance_eval(&block)
+    builder.create_type(loader)
+  end
+
+  # @api private
+  class TypeBuilder
+    attr_accessor :interface, :implementation, :implementation_class
+
+    def initialize(type_name)
+      @type_name = type_name
+      @implementation = nil
+      @implementation_class = nil
+    end
+
+    def create_type(loader)
+      raise ArgumentError, _('a data type must have an interface') unless @interface.is_a?(String)
+      created_type = Puppet::Pops::Types::PObjectType.new(
+        @type_name,
+        Puppet::Pops::Parser::EvaluatingParser.new.parse_string("{ #{@interface} }").body)
+
+      if !@implementation_class.nil?
+        if @implementation_class < Puppet::Pops::Types::PuppetObject
+          @implementation_class.instance_eval do
+            include Puppet::Pops::Types::PuppetObject
+            @_pcore_type = created_type
+
+            def self._pcore_type
+              @_pcore_type
+            end
+          end
+        else
+          Puppet::Pops::Loaders.implementation_registry.register_implementation(created_type, @implementation_class)
+        end
+        created_type.implementation_class = @implementation_class
+      elsif !@implementation.nil?
+        created_type.implementation_override = @implementation
+      end
+      created_type
+    end
+
+    def has_implementation?
+      !(@implementation_class.nil? && @implementation.nil?)
+    end
+  end
+
+  # The TypeBuilderAPI class exposes only those methods that the builder API provides
+  # @api public
+  class TypeBuilderAPI
+    # @api private
+    def initialize(type_builder)
+      @type_builder = type_builder
+    end
+
+    def interface(type_string)
+      raise ArgumentError, _('a data type can only have one interface') unless @type_builder.interface.nil?
+      @type_builder.interface = type_string
+    end
+
+    def implementation(&block)
+      raise ArgumentError, _('a data type can only have one implementation') if @type_builder.has_implementation?
+      @type_builder.implementation = block
+    end
+
+    def implementation_class(ruby_class)
+      raise ArgumentError, _('a data type can only have one implementation') if @type_builder.has_implementation?
+      @type_builder.implementation_class = ruby_class
+    end
+
+    def load_file(file_name)
+      Puppet::Util::Autoload.load_file(file_name, nil)
+    end
+  end
+end

data/vendored/puppet/lib/puppet/datatypes/error.rb

@@ -0,0 +1,21 @@
+Puppet::DataTypes.create_type('Error') do
+  interface <<-PUPPET
+    type_parameters => {
+      kind => Optional[Variant[String,Regexp,Type[Enum],Type[Pattern],Type[NotUndef],Type[Undef]]],
+      issue_code => Optional[Variant[String,Regexp,Type[Enum],Type[Pattern],Type[NotUndef],Type[Undef]]]
+    },
+    attributes => {
+      msg => String[1],
+      kind => { type => Optional[String[1]], value => undef },
+      details => { type => Optional[Hash[String[1],Data]], value => undef },
+      issue_code => { type => Optional[String[1]], value => undef },
+    },
+    functions => {
+      message => Callable[[], String[1]]
+    }
+    PUPPET
+
+  require 'puppet/datatypes/impl/error'
+
+  implementation_class Puppet::DataTypes::Error
+end

data/vendored/puppet/lib/puppet/datatypes/impl/error.rb

@@ -0,0 +1,40 @@
+class Puppet::DataTypes::Error
+  attr_reader :msg, :kind, :issue_code, :details
+  alias message msg
+
+  def self.from_asserted_hash(hash)
+    new(hash['msg'], hash['kind'], hash['details'], hash['issue_code'])
+  end
+
+  def _pcore_init_hash
+    result = { 'msg' => @msg }
+    result['kind'] = @kind unless @kind.nil?
+    result['details'] = @details unless @details.nil?
+    result['issue_code'] = @issue_code unless @issue_code.nil?
+    result
+  end
+
+  def initialize(msg, kind = nil, details = nil, issue_code = nil)
+    @msg = msg
+    @kind = kind
+    @details = details
+    @issue_code = issue_code
+  end
+
+  def eql?(o)
+    self.class.equal?(o.class) &&
+      @msg == o.msg &&
+      @kind == o.kind &&
+      @issue_code == o.issue_code &&
+      @details == o.details
+  end
+  alias == eql?
+
+  def hash
+    @msg.hash ^ @kind.hash ^ @issue_code.hash
+  end
+
+  def to_s
+    Puppet::Pops::Types::StringConverter.singleton.convert(self)
+  end
+end

data/vendored/puppet/lib/puppet/defaults.rb

@@ -0,0 +1,2071 @@
+require 'puppet/util/platform'
+
+module Puppet
+
+  def self.default_diffargs
+    if (Facter.value(:kernel) == "AIX" && Facter.value(:kernelmajversion) == "5300")
+      ""
+    else
+      "-u"
+    end
+  end
+
+  def self.default_digest_algorithm
+    Puppet::Util::Platform.fips_enabled? ? 'sha256' : 'md5'
+  end
+
+  def self.valid_digest_algorithms
+    Puppet::Util::Platform.fips_enabled? ?
+      %w[sha256 sha384 sha512 sha224] :
+      %w[md5 sha256 sha384 sha512 sha224]
+  end
+
+  def self.default_file_checksum_types
+    Puppet::Util::Platform.fips_enabled? ?
+      %w[sha256 sha384 sha512 sha224] :
+      %w[md5 sha256 sha384 sha512 sha224]
+  end
+
+  def self.valid_file_checksum_types
+    Puppet::Util::Platform.fips_enabled? ?
+      %w[sha256 sha256lite sha384 sha512 sha224 sha1 sha1lite mtime ctime] :
+      %w[md5 md5lite sha256 sha256lite sha384 sha512 sha224 sha1 sha1lite mtime ctime]
+  end
+
+  ############################################################################################
+  # NOTE: For information about the available values for the ":type" property of settings,
+  #   see the docs for Settings.define_settings
+  ############################################################################################
+
+  AS_DURATION = %q{This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).}
+
+  define_settings(:main,
+    :confdir  => {
+        :default  => nil,
+        :type     => :directory,
+        :desc     => "The main Puppet configuration directory.  The default for this setting
+          is calculated based on the user.  If the process is running as root or
+          the user that Puppet is supposed to run as, it defaults to a system
+          directory, but if it's running as any other user, it defaults to being
+          in the user's home directory.",
+    },
+    :codedir  => {
+        :default  => nil,
+        :type     => :directory,
+        :desc     => "The main Puppet code directory.  The default for this setting
+          is calculated based on the user.  If the process is running as root or
+          the user that Puppet is supposed to run as, it defaults to a system
+          directory, but if it's running as any other user, it defaults to being
+          in the user's home directory.",
+    },
+    :vardir   => {
+        :default  => nil,
+        :type     => :directory,
+        :owner    => "service",
+        :group    => "service",
+        :desc     => "Where Puppet stores dynamic and growing data.  The default for this
+          setting is calculated specially, like `confdir`_.",
+    },
+
+    ### NOTE: this setting is usually being set to a symbol value.  We don't officially have a
+    ###     setting type for that yet, but we might want to consider creating one.
+    :name     => {
+        :default  => nil,
+        :desc     => "The name of the application, if we are running as one.  The
+          default is essentially $0 without the path or `.rb`.",
+    }
+  )
+
+  define_settings(:main,
+    :logdir => {
+        :default  => nil,
+        :type     => :directory,
+        :mode     => "0750",
+        :owner    => "service",
+        :group    => "service",
+        :desc     => "The directory in which to store log files",
+    },
+    :log_level => {
+      :default    => 'notice',
+      :type       => :enum,
+      :values     => ["debug","info","notice","warning","err","alert","emerg","crit"],
+      :desc       => "Default logging level for messages from Puppet. Allowed values are:
+
+        * debug
+        * info
+        * notice
+        * warning
+        * err
+        * alert
+        * emerg
+        * crit
+        ",
+      :hook => proc {|value| Puppet::Util::Log.level = value },
+      :call_hook => :on_initialize_and_write,
+    },
+    :disable_warnings => {
+      :default => [],
+      :type    => :array,
+      :desc    => "A comma-separated list of warning types to suppress. If large numbers
+        of warnings are making Puppet's logs too large or difficult to use, you
+        can temporarily silence them with this setting.
+
+        If you are preparing to upgrade Puppet to a new major version, you
+        should re-enable all warnings for a while.
+
+        Valid values for this setting are:
+
+        * `deprecations` --- disables deprecation warnings.
+        * `undefined_variables` --- disables warnings about non existing variables.
+        * `undefined_resources` --- disables warnings about non existing resources.",
+      :hook      => proc do |value|
+        values = munge(value)
+        valid   = %w[deprecations undefined_variables undefined_resources]
+        invalid = values - (values & valid)
+        if not invalid.empty?
+          raise ArgumentError, _("Cannot disable unrecognized warning types %{invalid}.") % { invalid: invalid.inspect } +
+              ' ' + _("Valid values are %{values}.") % { values: valid.inspect}
+        end
+      end
+    },
+    :strict => {
+      :default    => :warning,
+      :type       => :symbolic_enum,
+      :values     => [:off, :warning, :error],
+      :desc       => "The strictness level of puppet. Allowed values are:
+
+        * off     - do not perform extra validation, do not report
+        * warning - perform extra validation, report as warning (default)
+        * error   - perform extra validation, fail with error
+
+        The strictness level is for both language semantics and runtime
+        evaluation validation. In addition to controlling the behavior with
+        this master switch some individual warnings may also be controlled
+        by the disable_warnings setting.
+
+        No new validations will be added to a micro (x.y.z) release,
+        but may be added in minor releases (x.y.0). In major releases
+        it expected that most (if not all) strictness validation become
+        standard behavior.",
+      :hook    => proc do |value|
+        munge(value)
+        value.to_sym
+      end
+    },
+    :disable_i18n => {
+      :default => false,
+      :type    => :boolean,
+      :desc    => "If true, turns off all translations of Puppet and module
+        log messages, which affects error, warning, and info log messages,
+        as well as any translations in the report and CLI.",
+      :hook    => proc do |value|
+        if value
+          require 'puppet/gettext/stubs'
+          Puppet::GettextConfig.disable_gettext
+        end
+      end
+    }
+  )
+
+  define_settings(:main,
+    :priority => {
+      :default => nil,
+      :type    => :priority,
+      :desc    => "The scheduling priority of the process.  Valid values are 'high',
+        'normal', 'low', or 'idle', which are mapped to platform-specific
+        values.  The priority can also be specified as an integer value and
+        will be passed as is, e.g. -5.  Puppet must be running as a privileged
+        user in order to increase scheduling priority.",
+    },
+    :trace => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "Whether to print stack traces on some errors",
+        :hook     => proc do |value|
+          # Enable or disable Facter's trace option too
+          Facter.trace(value) if Facter.respond_to? :trace
+        end
+    },
+    :profile => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "Whether to enable experimental performance profiling",
+    },
+    :future_features => {
+      :default => false,
+      :type => :boolean,
+      :desc => "Whether or not to enable all features currently being developed for future
+        major releases of Puppet. Should be used with caution, as in development
+        features are experimental and can have unexpected effects."
+    },
+    :static_catalogs => {
+      :default    => true,
+      :type       => :boolean,
+      :desc       => "Whether to compile a [static catalog](https://docs.puppet.com/puppet/latest/static_catalogs.html#enabling-or-disabling-static-catalogs),
+        which occurs only on a Puppet Server master when the `code-id-command` and
+        `code-content-command` settings are configured in its `puppetserver.conf` file.",
+    },
+    :strict_environment_mode => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether the agent specified environment should be considered authoritative,
+        causing the run to fail if the retrieved catalog does not match it.",
+    },
+    :autoflush => {
+      :default => true,
+      :type       => :boolean,
+      :desc       => "Whether log files should always flush to disk.",
+      :hook       => proc { |value| Log.autoflush = value }
+    },
+    :syslogfacility => {
+        :default  => "daemon",
+        :desc     => "What syslog facility to use when logging to syslog.
+          Syslog has a fixed list of valid facilities, and you must
+          choose one of those; you cannot just make one up."
+    },
+    :statedir => {
+        :default  => "$vardir/state",
+        :type     => :directory,
+        :mode     => "01755",
+        :desc     => "The directory where Puppet state is stored.  Generally,
+          this directory can be removed without causing harm (although it
+          might result in spurious service restarts)."
+    },
+    :rundir => {
+      :default  => nil,
+      :type     => :directory,
+      :mode     => "0755",
+      :owner    => "service",
+      :group    => "service",
+      :desc     => "Where Puppet PID files are kept."
+    },
+    :genconfig => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "When true, causes Puppet applications to print an example config file
+          to stdout and exit. The example will include descriptions of each
+          setting, and the current (or default) value of each setting,
+          incorporating any settings overridden on the CLI (with the exception
+          of `genconfig` itself). This setting only makes sense when specified
+          on the command line as `--genconfig`.",
+    },
+    :genmanifest => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "Whether to just print a manifest to stdout and exit.  Only makes
+          sense when specified on the command line as `--genmanifest`.  Takes into account arguments specified
+          on the CLI.",
+    },
+    :configprint => {
+        :default  => "",
+        :desc     => "Print the value of a specific configuration setting.  If the name of a
+          setting is provided for this, then the value is printed and puppet
+          exits.  Comma-separate multiple values.  For a list of all values,
+          specify 'all'.",
+    },
+    :color => {
+      :default => "ansi",
+      :type    => :string,
+      :desc    => "Whether to use colors when logging to the console.  Valid values are
+        `ansi` (equivalent to `true`), `html`, and `false`, which produces no color.
+        Defaults to false on Windows, as its console does not support ansi colors.",
+    },
+    :mkusers => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "Whether to create the necessary user and group that puppet agent will run as.",
+    },
+    :manage_internal_file_permissions => {
+        :default  => true,
+        :type     => :boolean,
+        :desc     => "Whether Puppet should manage the owner, group, and mode of files it uses internally",
+    },
+    :onetime => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "Perform one configuration run and exit, rather than spawning a long-running
+          daemon. This is useful for interactively running puppet agent, or
+          running puppet agent from cron.",
+        :short    => 'o',
+    },
+    :path => {
+        :default          => "none",
+        :desc             => "The shell search path.  Defaults to whatever is inherited
+          from the parent process.
+
+          This setting can only be set in the `[main]` section of puppet.conf; it cannot
+          be set in `[master]`, `[agent]`, or an environment config section.",
+        :call_hook => :on_define_and_write,
+        :hook             => proc do |value|
+          Puppet::Util.set_env('PATH', '') if Puppet::Util.get_env('PATH').nil?
+          Puppet::Util.set_env('PATH', value) unless value == 'none'
+          paths = Puppet::Util.get_env('PATH').split(File::PATH_SEPARATOR)
+          Puppet::Util::Platform.default_paths.each do |path|
+            Puppet::Util.set_env('PATH', Puppet::Util.get_env('PATH') + File::PATH_SEPARATOR + path) unless paths.include?(path)
+          end
+          value
+        end
+    },
+    :libdir => {
+        :type           => :directory,
+        :default        => "$vardir/lib",
+        :desc           => "An extra search path for Puppet.  This is only useful
+          for those files that Puppet will load on demand, and is only
+          guaranteed to work for those cases.  In fact, the autoload
+          mechanism is responsible for making sure this directory
+          is in Ruby's search path\n",
+      :call_hook => :on_initialize_and_write,
+      :hook             => proc do |value|
+        $LOAD_PATH.delete(@oldlibdir) if defined?(@oldlibdir) && $LOAD_PATH.include?(@oldlibdir)
+        @oldlibdir = value
+        $LOAD_PATH << value
+      end
+    },
+    :environment => {
+        :default  => "production",
+        :desc     => "The environment in which Puppet is running. For clients,
+          such as `puppet agent`, this determines the environment itself, which
+          Puppet uses to find modules and much more. For servers, such as `puppet master`,
+          this provides the default environment for nodes that Puppet knows nothing about.
+
+          When defining an environment in the `[agent]` section, this refers to the
+          environment that the agent requests from the master. The environment doesn't
+          have to exist on the local filesystem because the agent fetches it from the
+          master. This definition is used when running `puppet agent`.
+
+          When defined in the `[user]` section, the environment refers to the path that
+          Puppet uses to search for code and modules related to its execution. This
+          requires the environment to exist locally on the filesystem where puppet is
+          being executed. Puppet subcommands, including `puppet module` and
+          `puppet apply`, use this definition.
+
+          Given that the context and effects vary depending on the
+          [config section](https://puppet.com/docs/puppet/latest/config_file_main.html#config-sections)
+          in which the `environment` setting is defined, do not set it globally.",
+        :short    => "E"
+    },
+    :environmentpath => {
+      :default => "$codedir/environments",
+      :desc    => "A search path for directory environments, as a list of directories
+        separated by the system path separator character. (The POSIX path separator
+        is ':', and the Windows path separator is ';'.)
+
+        This setting must have a value set to enable **directory environments.** The
+        recommended value is `$codedir/environments`. For more details, see
+        <https://docs.puppet.com/puppet/latest/reference/environments.html>",
+      :type    => :path,
+    },
+    :always_retry_plugins => {
+        :type     => :boolean,
+        :default  => true,
+        :desc     => <<-'EOT'
+        Affects how we cache attempts to load Puppet resource types and features.  If
+        true, then calls to `Puppet.type.<type>?` `Puppet.feature.<feature>?`
+        will always attempt to load the type or feature (which can be an
+        expensive operation) unless it has already been loaded successfully.
+        This makes it possible for a single agent run to, e.g., install a
+        package that provides the underlying capabilities for a type or feature,
+        and then later load that type or feature during the same run (even if
+        the type or feature had been tested earlier and had not been available).
+
+        If this setting is set to false, then types and features will only be
+        checked once, and if they are not available, the negative result is
+        cached and returned for all subsequent attempts to load the type or
+        feature.  This behavior is almost always appropriate for the server,
+        and can result in a significant performance improvement for types and
+        features that are checked frequently.
+      EOT
+    },
+    :diff_args => {
+        :default  => lambda { default_diffargs },
+        :desc     => "Which arguments to pass to the diff command when printing differences between
+          files. The command to use can be chosen with the `diff` setting.",
+    },
+    :diff => {
+      :default => (Puppet.features.microsoft_windows? ? "" : "diff"),
+      :desc    => "Which diff command to use when printing differences between files. This setting
+          has no default value on Windows, as standard `diff` is not available, but Puppet can use many
+          third-party diff tools.",
+    },
+    :show_diff => {
+        :type     => :boolean,
+        :default  => false,
+        :desc     => "Whether to log and report a contextual diff when files are being replaced.
+          This causes partial file contents to pass through Puppet's normal
+          logging and reporting system, so this setting should be used with
+          caution if you are sending Puppet's reports to an insecure
+          destination. This feature currently requires the `diff/lcs` Ruby
+          library.",
+    },
+    :daemonize => {
+        :type     => :boolean,
+        :default  => (Puppet.features.microsoft_windows? ? false : true),
+        :desc     => "Whether to send the process into the background.  This defaults
+          to true on POSIX systems, and to false on Windows (where Puppet
+          currently cannot daemonize).",
+        :short    => "D",
+        :hook     => proc do |value|
+          if value and Puppet.features.microsoft_windows?
+            raise "Cannot daemonize on Windows"
+          end
+      end
+    },
+    :maximum_uid => {
+        :default  => 4294967290,
+        :desc     => "The maximum allowed UID.  Some platforms use negative UIDs
+          but then ship with tools that do not know how to handle signed ints,
+          so the UIDs show up as huge numbers that can then not be fed back into
+          the system.  This is a hackish way to fail in a slightly more useful
+          way when that happens.",
+    },
+    :route_file => {
+      :default    => "$confdir/routes.yaml",
+      :desc       => "The YAML file containing indirector route configuration.",
+    },
+    :node_terminus => {
+      :type       => :terminus,
+      :default    => "plain",
+      :desc       => <<-'EOT',
+        Which node data plugin to use when compiling node catalogs.
+
+        When Puppet compiles a catalog, it combines two primary sources of info: the main manifest,
+        and a node data plugin (often called a "node terminus," for historical reasons). Node data
+        plugins provide three things for a given node name:
+
+        1. A list of classes to add to that node's catalog (and, optionally, values for their
+           parameters).
+        2. Which Puppet environment the node should use.
+        3. A list of additional top-scope variables to set.
+
+        The three main node data plugins are:
+
+        * `plain` --- Returns no data, so that the main manifest controls all node configuration.
+        * `exec` --- Uses an
+          [external node classifier (ENC)](https://docs.puppet.com/puppet/latest/nodes_external.html),
+          configured by the `external_nodes` setting. This lets you pull a list of Puppet classes
+          from any external system, using a small glue script to perform the request and format the
+          result as YAML.
+        * `classifier` (formerly `console`) --- Specific to Puppet Enterprise. Uses the PE console
+          for node data."
+      EOT
+    },
+    :node_cache_terminus => {
+      :type       => :terminus,
+      :default    => nil,
+      :desc       => "How to store cached nodes.
+      Valid values are (none), 'json', 'msgpack', 'yaml' or write only yaml ('write_only_yaml').",
+    },
+    :data_binding_terminus => {
+      :type    => :terminus,
+      :default => "hiera",
+      :desc    =>
+        "This setting has been deprecated. Use of any value other than 'hiera' should instead be configured
+         in a version 5 hiera.yaml. Until this setting is removed, it controls which data binding terminus
+         to use for global automatic data binding (across all environments). By default this value is 'hiera'.
+         A value of 'none' turns off the global binding.",
+      :call_hook => :on_initialize_and_write,
+      :hook => proc do |value|
+        if Puppet[:strict] != :off
+          s_val = value.to_s # because sometimes the value is a symbol
+          unless s_val == 'hiera' || s_val == 'none' || value == '' || value.nil?
+            #TRANSLATORS 'data_binding_terminus' is a setting and should not be translated
+            message = _("Setting 'data_binding_terminus' is deprecated.")
+            #TRANSLATORS 'hiera' should not be translated
+            message += ' ' + _("Convert custom terminus to hiera 5 API.")
+            Puppet.deprecation_warning(message)
+          end
+        end
+      end
+    },
+    :hiera_config => {
+      :default => lambda do
+        config = nil
+        codedir = Puppet.settings[:codedir]
+        if codedir.is_a?(String)
+          config = File.expand_path(File.join(codedir, 'hiera.yaml'))
+          config = nil unless Puppet::FileSystem.exist?(config)
+        end
+        config = File.expand_path(File.join(Puppet.settings[:confdir], 'hiera.yaml')) if config.nil?
+        config
+      end,
+      :desc    => "The hiera configuration file. Puppet only reads this file on startup, so you must restart the puppet master every time you edit it.",
+      :type    => :file,
+    },
+    :binder_config => {
+      :default => nil,
+      :desc    => "The binder configuration file. Puppet reads this file on each request to configure the bindings system.
+      If set to nil (the default), a $confdir/binder_config.yaml is optionally loaded. If it does not exists, a default configuration
+      is used. If the setting :binding_config is specified, it must reference a valid and existing yaml file.",
+      :type    => :file,
+    },
+    :catalog_terminus => {
+      :type       => :terminus,
+      :default    => "compiler",
+      :desc       => "Where to get node catalogs.  This is useful to change if, for instance,
+      you'd like to pre-compile catalogs and store them in memcached or some other easily-accessed store.",
+    },
+    :catalog_cache_terminus => {
+      :type       => :terminus,
+      :default    => nil,
+      :desc       => "How to store cached catalogs. Valid values are 'json', 'msgpack' and 'yaml'. The agent application defaults to 'json'."
+    },
+    :facts_terminus => {
+      :default => 'facter',
+      :desc => "The node facts terminus.",
+    },
+    :default_file_terminus => {
+      :type       => :terminus,
+      :default    => "rest",
+      :desc       => "The default source for files if no server is given in a
+      uri, e.g. puppet:///file. The default of `rest` causes the file to be
+      retrieved using the `server` setting. When running `apply` the default
+      is `file_server`, causing requests to be filled locally."
+    },
+    :http_proxy_host => {
+      :default    => "none",
+      :desc       => "The HTTP proxy host to use for outgoing connections.  Note: You
+      may need to use a FQDN for the server hostname when using a proxy. Environment variable
+      http_proxy or HTTP_PROXY will override this value",
+    },
+    :http_proxy_port => {
+      :default    => 3128,
+      :desc       => "The HTTP proxy port to use for outgoing connections",
+    },
+    :http_proxy_user => {
+      :default    => "none",
+      :desc       => "The user name for an authenticated HTTP proxy. Requires the `http_proxy_host` setting.",
+    },
+    :http_proxy_password =>{
+      :default    => "none",
+      :hook       => proc do |value|
+        if Puppet.settings[:http_proxy_password] =~ /[@!# \/]/
+          raise "Passwords set in the http_proxy_password setting must be valid as part of a URL, and any reserved characters must be URL-encoded. We received: #{value}"
+        end
+      end,
+      :desc       => "The password for the user of an authenticated HTTP proxy.
+        Requires the `http_proxy_user` setting.
+
+        Note that passwords must be valid when used as part of a URL. If a password
+        contains any characters with special meanings in URLs (as specified by RFC 3986
+        section 2.2), they must be URL-encoded. (For example, `#` would become `%23`.)",
+    },
+    :http_keepalive_timeout => {
+      :default    => "4s",
+      :type       => :duration,
+      :desc       => "The maximum amount of time a persistent HTTP connection can remain idle in the connection pool, before it is closed.  This timeout should be shorter than the keepalive timeout used on the HTTP server, e.g. Apache KeepAliveTimeout directive.
+      #{AS_DURATION}"
+    },
+    :http_debug => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether to write HTTP request and responses to stderr. This should never be used in a production environment."
+    },
+    :http_connect_timeout => {
+      :default => "2m",
+      :type    => :duration,
+      :desc    => "The maximum amount of time to wait when establishing an HTTP connection. The default
+      value is 2 minutes.
+      #{AS_DURATION}",
+    },
+    :http_read_timeout => {
+      :type    => :duration,
+      :desc    => "The time to wait for one block to be read from an HTTP connection. If nothing is
+      read after the elapsed interval then the connection will be closed. The default value is unlimited.
+      #{AS_DURATION}",
+    },
+    :http_user_agent => {
+      :default => "Puppet/#{Puppet.version} Ruby/#{RUBY_VERSION}-p#{RUBY_PATCHLEVEL} (#{RUBY_PLATFORM})",
+      :desc    => "The HTTP User-Agent string to send when making network requests."
+    },
+    :filetimeout => {
+      :default    => "15s",
+      :type       => :duration,
+      :desc       => "The minimum time to wait between checking for updates in
+      configuration files.  This timeout determines how quickly Puppet checks whether
+      a file (such as manifests or templates) has changed on disk. #{AS_DURATION}",
+    },
+    :environment_timeout => {
+      :default    => "0",
+      :type       => :ttl,
+      :desc       => "How long the Puppet master should cache data it loads from an
+      environment.
+      #{AS_DURATION}
+      A value of `0` will disable caching. This setting can also be set to
+      `unlimited`, which will cache environments until the master is restarted
+      or told to refresh the cache.
+
+      You should change this setting once your Puppet deployment is doing
+      non-trivial work. We chose the default value of `0` because it lets new
+      users update their code without any extra steps, but it lowers the
+      performance of your Puppet master.
+
+      We recommend setting this to `unlimited` and explicitly refreshing your
+      Puppet master as part of your code deployment process.
+
+      * With Puppet Server, you should refresh environments by calling the
+        `environment-cache` API endpoint. See the docs for the Puppet Server
+        administrative API.
+      * With a Rack Puppet master, you should restart the web server or the
+        application server. Passenger lets you touch a `restart.txt` file to
+        refresh an application without restarting Apache; see the Passenger docs
+        for details.
+
+      We don't recommend using any value other than `0` or `unlimited`, since
+      most Puppet masters use a pool of Ruby interpreters which all have their
+      own cache timers. When these timers drift out of sync, agents can be served
+      inconsistent catalogs."
+    },
+    :environment_data_provider => {
+      :desc       => "The name of a registered environment data provider used when obtaining environment
+      specific data. The three built in and registered providers are 'none' (no data), 'function' (data
+      obtained by calling the function 'environment::data()') and 'hiera' (data obtained using a data
+      provider configured using a hiera.yaml file in root of the environment).
+      Other environment data providers may be registered in modules on the module path. For such
+      custom data providers see the respective module documentation. This setting is deprecated.",
+      :hook => proc { |value|
+        unless value.nil? || Puppet[:strict] == :off
+          #TRANSLATORS 'environment_data_provider' is a setting and should not be translated
+          Puppet.deprecation_warning(_("Setting 'environment_data_provider' is deprecated."))
+        end
+      }
+    },
+    :prerun_command => {
+      :default    => "",
+      :desc       => "A command to run before every agent run.  If this command returns a non-zero
+      return code, the entire Puppet run will fail.",
+    },
+    :postrun_command => {
+      :default    => "",
+      :desc       => "A command to run after every agent run.  If this command returns a non-zero
+      return code, the entire Puppet run will be considered to have failed, even though it might have
+      performed work during the normal run.",
+    },
+    :freeze_main => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "Freezes the 'main' class, disallowing any code to be added to it.  This
+          essentially means that you can't have any code outside of a node,
+          class, or definition other than in the site manifest.",
+    },
+    :trusted_server_facts => {
+      :default => true,
+      :type    => :boolean,
+      :deprecated => :completely,
+      :desc    => "The 'trusted_server_facts' setting is deprecated and has no effect as the
+        feature this enabled is now always on. The setting will be removed in a future version of puppet.",
+    },
+    :preview_outputdir => {
+      :default => '$vardir/preview',
+      :type     => :directory,
+      :mode     => "0750",
+      :owner    => "service",
+      :group    => "service",
+      :desc    => "The directory where catalog previews per node are generated."
+    }
+  )
+
+  define_settings(:main,
+      # Whether the application management feature is on or off - now deprecated and always on.
+      :app_management => {
+          :default  => false,
+          :type     => :boolean,
+          :desc       => "This setting has no effect and will be removed in a future Puppet version.",
+          :deprecated => :completely,
+      }
+  )
+
+  Puppet.define_settings(:module_tool,
+    :module_repository  => {
+      :default  => 'https://forgeapi.puppet.com',
+      :desc     => "The module repository",
+    },
+    :module_working_dir => {
+        :default  => (Puppet.features.microsoft_windows? ? Dir.tmpdir() : '$vardir/puppet-module'),
+        :desc     => "The directory into which module tool data is stored",
+    },
+    :module_skeleton_dir => {
+        :default  => '$module_working_dir/skeleton',
+        :desc     => "The directory which the skeleton for module tool generate is stored.",
+    },
+    :forge_authorization => {
+        :default  => nil,
+        :desc     => "The authorization key to connect to the Puppet Forge. Leave blank for unauthorized or license based connections",
+    },
+    :module_groups => {
+        :default  => nil,
+        :desc     => "Extra module groups to request from the Puppet Forge. This is an internal setting, and users should never change it.",
+    }
+  )
+
+    Puppet.define_settings(
+    :main,
+
+    # We have to downcase the fqdn, because the current ssl stuff (as opposed to in master) doesn't have good facilities for
+    # manipulating naming.
+    :certname => {
+      :default => lambda { Puppet::Settings.default_certname.downcase },
+      :desc => "The name to use when handling certificates. When a node
+        requests a certificate from the CA puppet master, it uses the value of the
+        `certname` setting as its requested Subject CN.
+
+        This is the name used when managing a node's permissions in
+        [auth.conf](https://docs.puppetlabs.com/puppet/latest/reference/config_file_auth.html).
+        In most cases, it is also used as the node's name when matching
+        [node definitions](https://docs.puppetlabs.com/puppet/latest/reference/lang_node_definitions.html)
+        and requesting data from an ENC. (This can be changed with the `node_name_value`
+        and `node_name_fact` settings, although you should only do so if you have
+        a compelling reason.)
+
+        A node's certname is available in Puppet manifests as `$trusted['certname']`. (See
+        [Facts and Built-In Variables](https://docs.puppetlabs.com/puppet/latest/reference/lang_facts_and_builtin_vars.html)
+        for more details.)
+
+        * For best compatibility, you should limit the value of `certname` to
+          only use lowercase letters, numbers, periods, underscores, and dashes. (That is,
+          it should match `/\A[a-z0-9._-]+\Z/`.)
+        * The special value `ca` is reserved, and can't be used as the certname
+          for a normal node.
+
+        Defaults to the node's fully qualified domain name.",
+      :hook => proc { |value| raise(ArgumentError, _("Certificate names must be lower case")) unless value == value.downcase }},
+    :dns_alt_names => {
+      :default => '',
+      :desc    => <<EOT,
+A comma-separated list of alternate DNS names for Puppet Server. These are extra
+hostnames (in addition to its `certname`) that the server is allowed to use when
+serving agents. Puppet checks this setting when automatically requesting a
+certificate for Puppet agent or Puppet Server, and when manually generating a
+certificate with `puppet cert generate`.
+
+In order to handle agent requests at a given hostname (like
+"puppet.example.com"), Puppet Server needs a certificate that proves it's
+allowed to use that name; if a server shows a certificate that doesn't include
+its hostname, Puppet agents will refuse to trust it. If you use a single
+hostname for Puppet traffic but load-balance it to multiple Puppet Servers, each
+of those servers needs to include the official hostname in its list of extra
+names.
+
+**Note:** The list of alternate names is locked in when the server's
+certificate is signed. If you need to change the list later, you can't just
+change this setting; you also need to:
+
+* On the server: Stop Puppet Server.
+* On the CA server: Revoke and clean the server's old certificate. (`puppet cert clean <NAME>`)
+* On the server: Delete the old certificate (and any old certificate signing requests)
+  from the [ssldir](https://docs.puppetlabs.com/puppet/latest/reference/dirs_ssldir.html).
+* On the server: Run `puppet agent -t --ca_server <CA HOSTNAME>` to request a new certificate
+* On the CA server: Sign the certificate request, explicitly allowing alternate names
+  (`puppet cert sign --allow-dns-alt-names <NAME>`).
+* On the server: Run `puppet agent -t --ca_server <CA HOSTNAME>` to retrieve the cert.
+* On the server: Start Puppet Server again.
+
+To see all the alternate names your servers are using, log into your CA server
+and run `puppet cert list -a`, then check the output for `(alt names: ...)`.
+Most agent nodes should NOT have alternate names; the only certs that should
+have them are Puppet Server nodes that you want other agents to trust.
+EOT
+    },
+    :csr_attributes => {
+      :default => "$confdir/csr_attributes.yaml",
+      :type => :file,
+      :desc => <<EOT
+An optional file containing custom attributes to add to certificate signing
+requests (CSRs). You should ensure that this file does not exist on your CA
+puppet master; if it does, unwanted certificate extensions may leak into
+certificates created with the `puppet cert generate` command.
+
+If present, this file must be a YAML hash containing a `custom_attributes` key
+and/or an `extension_requests` key. The value of each key must be a hash, where
+each key is a valid OID and each value is an object that can be cast to a string.
+
+Custom attributes can be used by the CA when deciding whether to sign the
+certificate, but are then discarded. Attribute OIDs can be any OID value except
+the standard CSR attributes (i.e. attributes described in RFC 2985 section 5.4).
+This is useful for embedding a pre-shared key for autosigning policy executables
+(see the `autosign` setting), often by using the `1.2.840.113549.1.9.7`
+("challenge password") OID.
+
+Extension requests will be permanently embedded in the final certificate.
+Extension OIDs must be in the "ppRegCertExt" (`1.3.6.1.4.1.34380.1.1`) or
+"ppPrivCertExt" (`1.3.6.1.4.1.34380.1.2`) OID arcs. The ppRegCertExt arc is
+reserved for four of the most common pieces of data to embed: `pp_uuid` (`.1`),
+`pp_instance_id` (`.2`), `pp_image_name` (`.3`), and `pp_preshared_key` (`.4`)
+--- in the YAML file, these can be referred to by their short descriptive names
+instead of their full OID. The ppPrivCertExt arc is unregulated, and can be used
+for site-specific extensions.
+EOT
+    },
+    :certdir => {
+      :default => "$ssldir/certs",
+      :type   => :directory,
+      :mode => "0755",
+      :owner => "service",
+      :group => "service",
+      :desc => "The certificate directory."
+    },
+    :ssldir => {
+      :default => "$confdir/ssl",
+      :type   => :directory,
+      :mode => "0771",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where SSL certificates are kept."
+    },
+    :publickeydir => {
+      :default => "$ssldir/public_keys",
+      :type   => :directory,
+      :mode => "0755",
+      :owner => "service",
+      :group => "service",
+      :desc => "The public key directory."
+    },
+    :requestdir => {
+      :default => "$ssldir/certificate_requests",
+      :type => :directory,
+      :mode => "0755",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where host certificate requests are stored."
+    },
+    :privatekeydir => {
+      :default => "$ssldir/private_keys",
+      :type   => :directory,
+      :mode => "0750",
+      :owner => "service",
+      :group => "service",
+      :desc => "The private key directory."
+    },
+    :privatedir => {
+      :default => "$ssldir/private",
+      :type   => :directory,
+      :mode => "0750",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where the client stores private certificate information."
+    },
+    :passfile => {
+      :default => "$privatedir/password",
+      :type   => :file,
+      :mode => "0640",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where puppet agent stores the password for its private key.
+        Generally unused."
+    },
+    :hostcsr => {
+      :default => "$ssldir/csr_$certname.pem",
+      :type   => :file,
+      :mode => "0644",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where individual hosts store and look for their certificate requests."
+    },
+    :hostcert => {
+      :default => "$certdir/$certname.pem",
+      :type   => :file,
+      :mode => "0644",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where individual hosts store and look for their certificates."
+    },
+    :hostprivkey => {
+      :default => "$privatekeydir/$certname.pem",
+      :type   => :file,
+      :mode => "0640",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where individual hosts store and look for their private key."
+    },
+    :hostpubkey => {
+      :default => "$publickeydir/$certname.pem",
+      :type   => :file,
+      :mode => "0644",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where individual hosts store and look for their public key."
+    },
+    :localcacert => {
+      :default => "$certdir/ca.pem",
+      :type   => :file,
+      :mode => "0644",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where each client stores the CA certificate."
+    },
+    :ssl_client_ca_auth => {
+      :type  => :file,
+      :mode  => "0644",
+      :owner => "service",
+      :group => "service",
+      :desc  => "Certificate authorities who issue server certificates.  SSL servers will not be
+        considered authentic unless they possess a certificate issued by an authority
+        listed in this file.  If this setting has no value then the Puppet master's CA
+        certificate (localcacert) will be used."
+    },
+    :ssl_server_ca_auth => {
+      :type  => :file,
+      :mode  => "0644",
+      :owner => "service",
+      :group => "service",
+      :desc  => "Certificate authorities who issue client certificates.  SSL clients will not be
+        considered authentic unless they possess a certificate issued by an authority
+        listed in this file.  If this setting has no value then the Puppet master's CA
+        certificate (localcacert) will be used."
+    },
+    :hostcrl => {
+      :default => "$ssldir/crl.pem",
+      :type   => :file,
+      :mode => "0644",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where the host's certificate revocation list can be found.
+        This is distinct from the certificate authority's CRL."
+    },
+    :certificate_revocation => {
+        :default  => 'chain',
+        :type     => :certificate_revocation,
+        :desc     => <<EOT
+Whether certificate revocation checking should be enabled, and what level of checking should be performed.
+
+When certificate_revocation is set to 'true' or 'chain', Puppet will download the CA CRL and will perform revocation
+checking against each certificate in the chain.
+
+Puppet is unable to load multiple CRLs, so if certificate_revocation is set to 'chain' and Puppet attempts to verify
+a certificate signed by a root CA the behavior is equivalent to the 'leaf' setting, and if Puppet attempts to verify
+a certificate signed by an intermediate CA then verification will fail as Puppet will be unable to load the multiple
+CRLs required for full chain checking. As such the 'chain' setting is limited in functionality and is meant as a stand
+in pending the implementation of full chain checking.
+
+When certificate_revocation is set to 'leaf', Puppet will download the CA CRL and will verify the leaf certificate
+against that CRL. CRLs will not be fetched or checked for the rest of the certificates in the chain. If you are using
+an intermediate CA certificate and want to enable certificate revocation checking, this setting must be set to 'leaf'.
+
+When certificate_revocation is set to 'false', Puppet will disable all certificate revocation checking and will not
+attempt to download the CRL.
+EOT
+    },
+    :digest_algorithm => {
+        :default  => lambda { default_digest_algorithm },
+        :type     => :enum,
+        :values   => valid_digest_algorithms,
+        :desc     => "Which digest algorithm to use for file resources and the filebucket.
+                      Valid values are #{valid_digest_algorithms.join(', ')}. Default is
+                      #{default_digest_algorithm}.",
+    },
+    :supported_checksum_types => {
+      :default => lambda { default_file_checksum_types },
+      :type    => :array,
+      :desc    => "Checksum types supported by this agent for use in file resources of a
+                   static catalog. Values must be comma-separated. Valid types are
+                   #{valid_file_checksum_types.join(', ')}. Default is
+                   #{default_file_checksum_types.join(', ')}.",
+      :hook    => proc do |value|
+        values = munge(value)
+
+        invalid = values - Puppet.valid_file_checksum_types
+        if not invalid.empty?
+          raise ArgumentError, _("Invalid value '%{value}' for parameter %{name}. Allowed values are '%{allowed_values}'") % {
+            value: invalid.first, name: @name, allowed_values: Puppet.valid_file_checksum_types.join("', '")
+          }
+        end
+      end
+    }
+  )
+
+    define_settings(
+    :ca,
+    :ca_name => {
+      :default    => "Puppet CA: $certname",
+      :desc       => "The name to use the Certificate Authority certificate.",
+    },
+    :cadir => {
+      :default => "$ssldir/ca",
+      :type => :directory,
+      :owner => "service",
+      :group => "service",
+      :mode => "0755",
+      :desc => "The root directory for the certificate authority."
+    },
+    :cacert => {
+      :default => "$cadir/ca_crt.pem",
+      :type => :file,
+      :owner => "service",
+      :group => "service",
+      :mode => "0644",
+      :desc => "The CA certificate."
+    },
+    :cakey => {
+      :default => "$cadir/ca_key.pem",
+      :type => :file,
+      :owner => "service",
+      :group => "service",
+      :mode => "0640",
+      :desc => "The CA private key."
+    },
+    :capub => {
+      :default => "$cadir/ca_pub.pem",
+      :type => :file,
+      :owner => "service",
+      :group => "service",
+      :mode => "0644",
+      :desc => "The CA public key."
+    },
+    :cacrl => {
+      :default => "$cadir/ca_crl.pem",
+      :type => :file,
+      :owner => "service",
+      :group => "service",
+      :mode => "0644",
+      :desc => "The certificate revocation list (CRL) for the CA. Will be used if present but otherwise ignored.",
+    },
+    :caprivatedir => {
+      :default => "$cadir/private",
+      :type => :directory,
+      :owner => "service",
+      :group => "service",
+      :mode => "0750",
+      :desc => "Where the CA stores private certificate information."
+    },
+    :csrdir => {
+      :default => "$cadir/requests",
+      :type => :directory,
+      :owner => "service",
+      :group => "service",
+      :mode  => "0755",
+      :desc => "Where the CA stores certificate requests"
+    },
+    :signeddir => {
+      :default => "$cadir/signed",
+      :type => :directory,
+      :owner => "service",
+      :group => "service",
+      :mode => "0755",
+      :desc => "Where the CA stores signed certificates."
+    },
+    :capass => {
+      :default => "$caprivatedir/ca.pass",
+      :type => :file,
+      :owner => "service",
+      :group => "service",
+      :mode => "0640",
+      :desc => "Where the CA stores the password for the private key."
+    },
+    :serial => {
+      :default => "$cadir/serial",
+      :type => :file,
+      :owner => "service",
+      :group => "service",
+      :mode => "0644",
+      :desc => "Where the serial number for certificates is stored."
+    },
+    :autosign => {
+      :default => "$confdir/autosign.conf",
+      :type => :autosign,
+      :desc => "Whether (and how) to autosign certificate requests. This setting
+        is only relevant on a puppet master acting as a certificate authority (CA).
+
+        Valid values are true (autosigns all certificate requests; not recommended),
+        false (disables autosigning certificates), or the absolute path to a file.
+
+        The file specified in this setting may be either a **configuration file**
+        or a **custom policy executable.** Puppet will automatically determine
+        what it is: If the Puppet user (see the `user` setting) can execute the
+        file, it will be treated as a policy executable; otherwise, it will be
+        treated as a config file.
+
+        If a custom policy executable is configured, the CA puppet master will run it
+        every time it receives a CSR. The executable will be passed the subject CN of the
+        request _as a command line argument,_ and the contents of the CSR in PEM format
+        _on stdin._ It should exit with a status of 0 if the cert should be autosigned
+        and non-zero if the cert should not be autosigned.
+
+        If a certificate request is not autosigned, it will persist for review. An admin
+        user can use the `puppet cert sign` command to manually sign it, or can delete
+        the request.
+
+        For info on autosign configuration files, see
+        [the guide to Puppet's config files](https://docs.puppetlabs.com/puppet/latest/reference/config_about_settings.html).",
+    },
+    :allow_duplicate_certs => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether to allow a new certificate
+      request to overwrite an existing certificate.",
+    },
+    :ca_ttl => {
+      :default    => "5y",
+      :type       => :duration,
+      :desc       => "The default TTL for new certificates.
+      #{AS_DURATION}"
+    },
+    :keylength => {
+      :default    => 4096,
+      :desc       => "The bit length of keys.",
+    },
+    :cert_inventory => {
+      :default => "$cadir/inventory.txt",
+      :type => :file,
+      :mode => "0644",
+      :owner => "service",
+      :group => "service",
+      :desc => "The inventory file. This is a text file to which the CA writes a
+        complete listing of all certificates."
+    }
+  )
+
+  # Define the config default.
+
+    define_settings(:application,
+      :config_file_name => {
+          :type     => :string,
+          :default  => Puppet::Settings.default_config_file_name,
+          :desc     => "The name of the puppet config file.",
+      },
+      :config => {
+          :type => :file,
+          :default  => "$confdir/${config_file_name}",
+          :desc     => "The configuration file for the current puppet application.",
+      },
+      :pidfile => {
+          :type => :file,
+          :default  => "$rundir/${run_mode}.pid",
+          :desc     => "The file containing the PID of a running process.
+            This file is intended to be used by service management frameworks
+            and monitoring systems to determine if a puppet process is still in
+            the process table.",
+      },
+      :sourceaddress => {
+        :default    => nil,
+        :desc       => "The address the agent should use to initiate requests.",
+      },
+      :bindaddress => {
+        :default    => "*",
+        :desc       => "The address a listening server should bind to.",
+      }
+  )
+
+  define_settings(:environment,
+    :manifest => {
+      :default    => nil,
+      :type       => :file_or_directory,
+      :desc       => "The entry-point manifest for puppet master. This can be one file
+        or a directory of manifests to be evaluated in alphabetical order. Puppet manages
+        this path as a directory if one exists or if the path ends with a / or \\.
+
+        Setting a global value for `manifest` in puppet.conf is not allowed
+        (but it can be overridden from the commandline). Please use
+        directory environments instead. If you need to use something other than the
+        environment's `manifests` directory as the main manifest, you can set
+        `manifest` in environment.conf. For more info, see
+        <https://docs.puppet.com/puppet/latest/reference/environments.html>",
+    },
+    :modulepath => {
+      :default => "",
+      :type => :path,
+      :desc => "The search path for modules, as a list of directories separated by the system
+        path separator character. (The POSIX path separator is ':', and the
+        Windows path separator is ';'.)
+
+        Setting a global value for `modulepath` in puppet.conf is not allowed
+        (but it can be overridden from the commandline). Please use
+        directory environments instead. If you need to use something other than the
+        default modulepath of `<ACTIVE ENVIRONMENT'S MODULES DIR>:$basemodulepath`,
+        you can set `modulepath` in environment.conf. For more info, see
+        <https://docs.puppet.com/puppet/latest/reference/environments.html>",
+    },
+    :config_version => {
+      :default    => "",
+      :desc       => "How to determine the configuration version.  By default, it will be the
+      time that the configuration is parsed, but you can provide a shell script to override how the
+      version is determined.  The output of this script will be added to every log message in the
+      reports, allowing you to correlate changes on your hosts to the source version on the server.
+
+      Setting a global value for config_version in puppet.conf is not allowed
+      (but it can be overridden from the commandline). Please set a
+      per-environment value in environment.conf instead. For more info, see
+      <https://docs.puppet.com/puppet/latest/reference/environments.html>",
+    }
+  )
+
+  define_settings(:master,
+    :user => {
+      :default    => "puppet",
+      :desc       => "The user puppet master should run as.",
+    },
+    :group => {
+      :default    => "puppet",
+      :desc       => "The group puppet master should run as.",
+    },
+    :default_manifest => {
+      :default    => "./manifests",
+      :type       => :string,
+      :desc       => "The default main manifest for directory environments. Any environment that
+        doesn't set the `manifest` setting in its `environment.conf` file will use
+        this manifest.
+
+        This setting's value can be an absolute or relative path. An absolute path
+        will make all environments default to the same main manifest; a relative
+        path will allow each environment to use its own manifest, and Puppet will
+        resolve the path relative to each environment's main directory.
+
+        In either case, the path can point to a single file or to a directory of
+        manifests to be evaluated in alphabetical order.",
+    },
+    :disable_per_environment_manifest => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether to disallow an environment-specific main manifest. When set
+        to `true`, Puppet will use the manifest specified in the `default_manifest` setting
+        for all environments. If an environment specifies a different main manifest in its
+        `environment.conf` file, catalog requests for that environment will fail with an error.
+
+        This setting requires `default_manifest` to be set to an absolute path.",
+      :hook       => proc do |value|
+        if value && !Pathname.new(Puppet[:default_manifest]).absolute?
+          raise(Puppet::Settings::ValidationError,
+                "The 'default_manifest' setting must be set to an absolute path when 'disable_per_environment_manifest' is true")
+        end
+      end,
+    },
+    :code => {
+      :default    => "",
+      :desc       => "Code to parse directly.  This is essentially only used
+      by `puppet`, and should only be set if you're writing your own Puppet
+      executable.",
+    },
+    :masterhttplog => {
+      :default => "$logdir/masterhttp.log",
+      :type => :file,
+      :owner => "service",
+      :group => "service",
+      :mode => "0660",
+      :create => true,
+      :desc => "Where the puppet master web server saves its access log. This is
+        only used when running a WEBrick puppet master. When puppet master is
+        running under a Rack server like Passenger, that web server will have
+        its own logging behavior."
+    },
+    :masterport => {
+      :default    => 8140,
+      :desc       => "The port for puppet master traffic. For puppet master,
+      this is the port to listen on; for puppet agent, this is the port
+      to make requests on. Both applications use this setting to get the port.",
+    },
+    :node_name => {
+      :default    => "cert",
+      :desc       => "How the puppet master determines the client's identity
+      and sets the 'hostname', 'fqdn' and 'domain' facts for use in the manifest,
+      in particular for determining which 'node' statement applies to the client.
+      Possible values are 'cert' (use the subject's CN in the client's
+      certificate) and 'facter' (use the hostname that the client
+      reported in its facts)",
+    },
+    :bucketdir => {
+      :default => "$vardir/bucket",
+      :type => :directory,
+      :mode => "0750",
+      :owner => "service",
+      :group => "service",
+      :desc => "Where FileBucket files are stored."
+    },
+    :rest_authconfig => {
+      :default    => "$confdir/auth.conf",
+      :type       => :file,
+      :desc       => "The configuration file that defines the rights to the different
+      rest indirections.  This can be used as a fine-grained
+      authorization system for `puppet master`.",
+    },
+    :ca => {
+      :default    => true,
+      :type       => :boolean,
+      :desc       => "Whether the master should function as a certificate authority.",
+    },
+    :trusted_oid_mapping_file => {
+      :default    => "$confdir/custom_trusted_oid_mapping.yaml",
+      :type       => :file,
+      :desc       => "File that provides mapping between custom SSL oids and user-friendly names"
+    },
+    :basemodulepath => {
+      :default => "$codedir/modules#{File::PATH_SEPARATOR}/opt/puppetlabs/puppet/modules",
+      :type => :path,
+      :desc => "The search path for **global** modules. Should be specified as a
+        list of directories separated by the system path separator character. (The
+        POSIX path separator is ':', and the Windows path separator is ';'.)
+
+        These are the modules that will be used by _all_ environments. Note that
+        the `modules` directory of the active environment will have priority over
+        any global directories. For more info, see
+        <https://docs.puppet.com/puppet/latest/reference/environments.html>",
+    },
+    :ssl_client_header => {
+      :default    => "HTTP_X_CLIENT_DN",
+      :desc       => "The header containing an authenticated client's SSL DN.
+      This header must be set by the proxy to the authenticated client's SSL
+      DN (e.g., `/CN=puppet.puppetlabs.com`).  Puppet will parse out the Common
+      Name (CN) from the Distinguished Name (DN) and use the value of the CN
+      field for authorization.
+
+      Note that the name of the HTTP header gets munged by the web server
+      common gateway interface: an `HTTP_` prefix is added, dashes are converted
+      to underscores, and all letters are uppercased.  Thus, to use the
+      `X-Client-DN` header, this setting should be `HTTP_X_CLIENT_DN`.",
+    },
+    :ssl_client_verify_header => {
+      :default    => "HTTP_X_CLIENT_VERIFY",
+      :desc       => "The header containing the status message of the client
+      verification. This header must be set by the proxy to 'SUCCESS' if the
+      client successfully authenticated, and anything else otherwise.
+
+      Note that the name of the HTTP header gets munged by the web server
+      common gateway interface: an `HTTP_` prefix is added, dashes are converted
+      to underscores, and all letters are uppercased.  Thus, to use the
+      `X-Client-Verify` header, this setting should be
+      `HTTP_X_CLIENT_VERIFY`.",
+    },
+    # To make sure this directory is created before we try to use it on the server, we need
+    # it to be in the server section (#1138).
+    :yamldir => {
+      :default => "$vardir/yaml",
+      :type => :directory,
+      :owner => "service",
+      :group => "service",
+      :mode => "0750",
+      :desc => "The directory in which YAML data is stored, usually in a subdirectory."},
+    :server_datadir => {
+      :default => "$vardir/server_data",
+      :type => :directory,
+      :owner => "service",
+      :group => "service",
+      :mode => "0750",
+      :desc => "The directory in which serialized data is stored, usually in a subdirectory."},
+    :reports => {
+      :default    => "store",
+      :desc       => "The list of report handlers to use. When using multiple report handlers,
+        their names should be comma-separated, with whitespace allowed. (For example,
+        `reports = http, store`.)
+
+        This setting is relevant to puppet master and puppet apply. The puppet
+        master will call these report handlers with the reports it receives from
+        agent nodes, and puppet apply will call them with its own report. (In
+        all cases, the node applying the catalog must have `report = true`.)
+
+        See the report reference for information on the built-in report
+        handlers; custom report handlers can also be loaded from modules.
+        (Report handlers are loaded from the lib directory, at
+        `puppet/reports/NAME.rb`.)",
+    },
+    :reportdir => {
+      :default => "$vardir/reports",
+      :type => :directory,
+      :mode => "0750",
+      :owner => "service",
+      :group => "service",
+      :desc => "The directory in which to store reports. Each node gets
+        a separate subdirectory in this directory. This setting is only
+        used when the `store` report processor is enabled (see the
+        `reports` setting)."},
+    :reporturl => {
+      :default    => "http://localhost:3000/reports/upload",
+      :desc       => "The URL that reports should be forwarded to. This setting
+        is only used when the `http` report processor is enabled (see the
+        `reports` setting).",
+    },
+    :fileserverconfig => {
+      :default    => "$confdir/fileserver.conf",
+      :type       => :file,
+      :desc       => "Where the fileserver configuration is stored.",
+    },
+    :strict_hostname_checking => {
+      :default    => false,
+      :desc       => "Whether to only search for the complete
+            hostname as it is in the certificate when searching for node information
+            in the catalogs.",
+    }
+  )
+
+  define_settings(:device,
+    :devicedir =>  {
+        :default  => "$vardir/devices",
+        :type     => :directory,
+        :mode     => "0750",
+        :owner    => "service",
+        :group    => "service",
+        :desc     => "The root directory of devices' $vardir.",
+    },
+    :deviceconfig => {
+        :default  => "$confdir/device.conf",
+        :desc     => "Path to the device config file for puppet device.",
+    }
+  )
+
+  define_settings(:agent,
+    :node_name_value => {
+      :default => "$certname",
+      :desc => "The explicit value used for the node name for all requests the agent
+        makes to the master. WARNING: This setting is mutually exclusive with
+        node_name_fact.  Changing this setting also requires changes to the default
+        auth.conf configuration on the Puppet Master.  Please see
+        http://links.puppet.com/node_name_value for more information."
+    },
+    :node_name_fact => {
+      :default => "",
+      :desc => "The fact name used to determine the node name used for all requests the agent
+        makes to the master. WARNING: This setting is mutually exclusive with
+        node_name_value.  Changing this setting also requires changes to the default
+        auth.conf configuration on the Puppet Master.  Please see
+        http://links.puppet.com/node_name_fact for more information.",
+      :hook => proc do |value|
+        if !value.empty? and Puppet[:node_name_value] != Puppet[:certname]
+          raise "Cannot specify both the node_name_value and node_name_fact settings"
+        end
+      end
+    },
+    :statefile => {
+      :default => "$statedir/state.yaml",
+      :type => :file,
+      :mode => "0660",
+      :desc => "Where puppet agent and puppet master store state associated
+        with the running configuration.  In the case of puppet master,
+        this file reflects the state discovered through interacting
+        with clients."
+      },
+    :transactionstorefile => {
+      :default => "$statedir/transactionstore.yaml",
+      :type => :file,
+      :mode => "0660",
+      :desc => "Transactional storage file for persisting data between
+        transactions for the purposes of infering information (such as
+        corrective_change) on new data received."
+    },
+    :clientyamldir => {
+      :default => "$vardir/client_yaml",
+      :type => :directory,
+      :mode => "0750",
+      :desc => "The directory in which client-side YAML data is stored."
+    },
+    :client_datadir => {
+      :default => "$vardir/client_data",
+      :type => :directory,
+      :mode => "0750",
+      :desc => "The directory in which serialized data is stored on the client."
+    },
+    :classfile => {
+      :default => "$statedir/classes.txt",
+      :type => :file,
+      :owner => "root",
+      :mode => "0640",
+      :desc => "The file in which puppet agent stores a list of the classes
+        associated with the retrieved configuration.  Can be loaded in
+        the separate `puppet` executable using the `--loadclasses`
+        option."},
+    :resourcefile => {
+      :default => "$statedir/resources.txt",
+      :type => :file,
+      :owner => "root",
+      :mode => "0640",
+      :desc => "The file in which puppet agent stores a list of the resources
+        associated with the retrieved configuration."  },
+    :puppetdlog => {
+      :default => "$logdir/puppetd.log",
+      :type => :file,
+      :owner => "root",
+      :mode => "0640",
+      :desc => "The fallback log file. This is only used when the `--logdest` option
+        is not specified AND Puppet is running on an operating system where both
+        the POSIX syslog service and the Windows Event Log are unavailable. (Currently,
+        no supported operating systems match that description.)
+
+        Despite the name, both puppet agent and puppet master will use this file
+        as the fallback logging destination.
+
+        For control over logging destinations, see the `--logdest` command line
+        option in the manual pages for puppet master, puppet agent, and puppet
+        apply. You can see man pages by running `puppet <SUBCOMMAND> --help`,
+        or read them online at https://docs.puppetlabs.com/puppet/latest/reference/man/."
+    },
+    :server => {
+      :default => "puppet",
+      :desc => "The puppet master server to which the puppet agent should connect.",
+      :call_hook => :on_initialize_and_write,
+      :hook => proc { |value|
+        if Puppet.settings.set_by_config?(:server) && Puppet.settings.set_by_config?(:server_list)
+          #TRANSLATOR 'server' and 'server_list' are setting names and should not be translated
+          message = _('Attempted to set both server and server_list.')
+          message += ' ' + _('Server setting will not be used.')
+          Puppet.deprecation_warning(message, :SERVER_DUPLICATION)
+        end
+      }
+    },
+    :server_list => {
+      :default => [],
+      :type => :server_list,
+      :desc => "The list of puppet master servers to which the puppet agent should connect,
+        in the order that they will be tried.",
+      :call_hook => :on_initialize_and_write,
+      :hook => proc { |value|
+        if Puppet.settings.set_by_config?(:server) && Puppet.settings.set_by_config?(:server_list)
+          #TRANSLATOR 'server' and 'server_list' are setting names and should not be translated
+          message = _('Attempted to set both server and server_list.')
+          message += ' ' + _('Server setting will not be used.')
+          Puppet.deprecation_warning(message, :SERVER_DUPLICATION)
+        end
+      }
+    },
+    :use_srv_records => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether the server will search for SRV records in DNS for the current domain.",
+    },
+    :srv_domain => {
+      :default    => lambda { Puppet::Settings.domain_fact },
+      :desc       => "The domain which will be queried to find the SRV records of servers to use.",
+    },
+    :ignoreschedules => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Boolean; whether puppet agent should ignore schedules.  This is useful
+      for initial puppet agent runs.",
+    },
+    :default_schedules => {
+      :default    => true,
+      :type       => :boolean,
+      :desc       => "Boolean; whether to generate the default schedule resources. Setting this to
+      false is useful for keeping external report processors clean of skipped schedule resources.",
+    },
+    :noop => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether to apply catalogs in noop mode, which allows Puppet to
+        partially simulate a normal run. This setting affects puppet agent and
+        puppet apply.
+
+        When running in noop mode, Puppet will check whether each resource is in sync,
+        like it does when running normally. However, if a resource attribute is not in
+        the desired state (as declared in the catalog), Puppet will take no
+        action, and will instead report the changes it _would_ have made. These
+        simulated changes will appear in the report sent to the puppet master, or
+        be shown on the console if running puppet agent or puppet apply in the
+        foreground. The simulated changes will not send refresh events to any
+        subscribing or notified resources, although Puppet will log that a refresh
+        event _would_ have been sent.
+
+        **Important note:**
+        [The `noop` metaparameter](https://docs.puppetlabs.com/puppet/latest/reference/metaparameter.html#noop)
+        allows you to apply individual resources in noop mode, and will override
+        the global value of the `noop` setting. This means a resource with
+        `noop => false` _will_ be changed if necessary, even when running puppet
+        agent with `noop = true` or `--noop`. (Conversely, a resource with
+        `noop => true` will only be simulated, even when noop mode is globally disabled.)",
+    },
+    :runinterval => {
+      :default  => "30m",
+      :type     => :duration,
+      :desc     => "How often puppet agent applies the catalog.
+          Note that a runinterval of 0 means \"run continuously\" rather than
+          \"never run.\" If you want puppet agent to never run, you should start
+          it with the `--no-client` option. #{AS_DURATION}",
+    },
+    :runtimeout => {
+      :default  => 0,
+      :type     => :duration,
+      :desc     => "The maximum amount of time an agent run is allowed to take.
+          A Puppet agent run that exceeds this timeout will be aborted.
+          Defaults to 0, which is unlimited. #{AS_DURATION}",
+    },
+    :ca_server => {
+      :default    => "$server",
+      :desc       => "The server to use for certificate
+      authority requests.  It's a separate server because it cannot
+      and does not need to horizontally scale.",
+    },
+    :ca_port => {
+      :default    => "$masterport",
+      :desc       => "The port to use for the certificate authority.",
+    },
+    :preferred_serialization_format => {
+      :default    => "json",
+      :desc       => "The preferred means of serializing
+      ruby instances for passing over the wire.  This won't guarantee that all
+      instances will be serialized using this method, since not all classes
+      can be guaranteed to support this format, but it will be used for all
+      classes that support it.",
+    },
+    :agent_catalog_run_lockfile => {
+      :default    => "$statedir/agent_catalog_run.lock",
+      :type       => :string, # (#2888) Ensure this file is not added to the settings catalog.
+      :desc       => "A lock file to indicate that a puppet agent catalog run is currently in progress.
+        The file contains the pid of the process that holds the lock on the catalog run.",
+    },
+    :agent_disabled_lockfile => {
+        :default    => "$statedir/agent_disabled.lock",
+        :type       => :file,
+        :desc       => "A lock file to indicate that puppet agent runs have been administratively
+          disabled.  File contains a JSON object with state information.",
+    },
+    :usecacheonfailure => {
+      :default    => true,
+      :type       => :boolean,
+      :desc       => "Whether to use the cached configuration when the remote
+        configuration will not compile.  This option is useful for testing
+        new configurations, where you want to fix the broken configuration
+        rather than reverting to a known-good one.",
+    },
+    :use_cached_catalog => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether to only use the cached catalog rather than compiling a new catalog
+        on every run.  Puppet can be run with this enabled by default and then selectively
+        disabled when a recompile is desired.",
+    },
+    :ignoremissingtypes => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Skip searching for classes and definitions that were missing during a
+        prior compilation. The list of missing objects is maintained per-environment and
+        persists until the environment is cleared or the master is restarted.",
+    },
+    :ignorecache => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "This setting has no effect and will be removed in a future Puppet version.",
+      :deprecated => :completely,
+    },
+    :splaylimit => {
+      :default    => "$runinterval",
+      :type       => :duration,
+      :desc       => "The maximum time to delay before an agent's first run when
+        `splay` is enabled. Defaults to the agent's `$runinterval`. The
+        `splay` interval is random and recalculated each time the agent is started or
+        restarted. #{AS_DURATION}",
+    },
+    :splay => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether to sleep for a random amount of time, ranging from
+        immediately up to its `$splaylimit`, before performing its first agent run
+        after a service restart. After this period, the agent runs periodically
+        on its `$runinterval`.
+
+        For example, assume a default 30-minute `$runinterval`, `splay` set to its
+        default of `false`, and an agent starting at :00 past the hour. The agent
+        would check in every 30 minutes at :01 and :31 past the hour.
+
+        With `splay` enabled, it waits any amount of time up to its `$splaylimit`
+        before its first run. For example, it might randomly wait 8 minutes,
+        then start its first run at :08 past the hour. With the `$runinterval`
+        at its default 30 minutes, its next run will be at :38 past the hour.
+
+        If you restart an agent's puppet service with `splay` enabled, it
+        recalculates its splay period and delays its first agent run after
+        restarting for this new period. If you simultaneously restart a group of
+        puppet agents with `splay` enabled, their checkins to your puppet masters
+        can be distributed more evenly.",
+    },
+    :clientbucketdir => {
+      :default  => "$vardir/clientbucket",
+      :type     => :directory,
+      :mode     => "0750",
+      :desc     => "Where FileBucket files are stored locally."
+    },
+    :configtimeout => {
+      :default  => "2m",
+      :type     => :duration,
+      :desc     => "How long the client should wait for the configuration to be retrieved
+        before considering it a failure. This setting is deprecated and has been replaced
+        by http_connect_timeout and http_read_timeout.
+        #{AS_DURATION}",
+      :deprecated => :completely,
+      :hook       => proc do |value|
+        Puppet[:http_connect_timeout] = value
+        Puppet[:http_read_timeout]    = value
+      end
+    },
+    :report_server => {
+      :default  => "$server",
+      :desc     => "The server to send transaction reports to.",
+    },
+    :report_port => {
+      :default  => "$masterport",
+      :desc     => "The port to communicate with the report_server.",
+    },
+    :report => {
+      :default  => true,
+      :type     => :boolean,
+      :desc     => "Whether to send reports after every transaction.",
+    },
+    :lastrunfile =>  {
+      :default  => "$statedir/last_run_summary.yaml",
+      :type     => :file,
+      :mode     => "0644",
+      :desc     => "Where puppet agent stores the last run report summary in yaml format."
+    },
+    :lastrunreport =>  {
+      :default  => "$statedir/last_run_report.yaml",
+      :type     => :file,
+      :mode     => "0640",
+      :desc     => "Where puppet agent stores the last run report in yaml format."
+    },
+    :graph => {
+      :default  => false,
+      :type     => :boolean,
+      :desc     => "Whether to create .dot graph files, which let you visualize the
+        dependency and containment relationships in Puppet's catalog. You
+        can load and view these files with tools like
+        [OmniGraffle](http://www.omnigroup.com/applications/omnigraffle/) (OS X)
+        or [graphviz](http://www.graphviz.org/) (multi-platform).
+
+        Graph files are created when _applying_ a catalog, so this setting
+        should be used on nodes running `puppet agent` or `puppet apply`.
+
+        The `graphdir` setting determines where Puppet will save graphs. Note
+        that we don't save graphs for historical runs; Puppet will replace the
+        previous .dot files with new ones every time it applies a catalog.
+
+        See your graphing software's documentation for details on opening .dot
+        files. If you're using GraphViz's `dot` command, you can do a quick PNG
+        render with `dot -Tpng <DOT FILE> -o <OUTPUT FILE>`.",
+    },
+    :graphdir => {
+      :default    => "$statedir/graphs",
+      :type       => :directory,
+      :desc       => "Where to save .dot-format graphs (when the `graph` setting is enabled).",
+    },
+    :waitforcert => {
+      :default  => "2m",
+      :type     => :duration,
+      :desc     => "How frequently puppet agent should ask for a signed certificate.
+
+      When starting for the first time, puppet agent will submit a certificate
+      signing request (CSR) to the server named in the `ca_server` setting
+      (usually the puppet master); this may be autosigned, or may need to be
+      approved by a human, depending on the CA server's configuration.
+
+      Puppet agent cannot apply configurations until its approved certificate is
+      available. Since the certificate may or may not be available immediately,
+      puppet agent will repeatedly try to fetch it at this interval. You can
+      turn off waiting for certificates by specifying a time of 0, in which case
+      puppet agent will exit if it cannot get a cert.
+      #{AS_DURATION}",
+    },
+    :ordering => {
+      :type => :enum,
+      :values => ["manifest", "title-hash", "random"],
+      :default => "manifest",
+      :desc => "How unrelated resources should be ordered when applying a catalog.
+      Allowed values are `title-hash`, `manifest`, and `random`. This
+      setting affects puppet agent and puppet apply, but not puppet master.
+
+      * `manifest` (the default) will use the order in which the resources were
+        declared in their manifest files.
+      * `title-hash` (the default in 3.x) will order resources randomly, but
+        will use the same order across runs and across nodes. It is only of
+        value if you're migrating from 3.x and have errors running with
+        `manifest`.
+      * `random` will order resources randomly and change their order with each
+        run. This can work like a fuzzer for shaking out undeclared dependencies.
+
+      Regardless of this setting's value, Puppet will always obey explicit
+      dependencies set with the before/require/notify/subscribe metaparameters
+      and the `->`/`~>` chaining arrows; this setting only affects the relative
+      ordering of _unrelated_ resources."
+    }
+  )
+
+  # Plugin information.
+
+  define_settings(
+    :main,
+    :plugindest => {
+      :type       => :directory,
+      :default    => "$libdir",
+      :desc       => "Where Puppet should store plugins that it pulls down from the central
+      server.",
+    },
+    :pluginsource => {
+      :default    => "puppet:///plugins",
+      :desc       => "From where to retrieve plugins.  The standard Puppet `file` type
+      is used for retrieval, so anything that is a valid file source can
+      be used here.",
+    },
+    :pluginfactdest => {
+      :type     => :directory,
+      :default  => "$vardir/facts.d",
+      :desc     => "Where Puppet should store external facts that are being handled by pluginsync",
+    },
+    :pluginfactsource => {
+      :default  => "puppet:///pluginfacts",
+      :desc     => "Where to retrieve external facts for pluginsync",
+    },
+    :localedest => {
+      :type       => :directory,
+      :default    => "$vardir/locales",
+      :desc       => "Where Puppet should store translation files that it pulls down from the central
+      server.",
+    },
+    :localesource => {
+      :default    => "puppet:///locales",
+      :desc       => "From where to retrieve translation files.  The standard Puppet `file` type
+      is used for retrieval, so anything that is a valid file source can
+      be used here.",
+    },
+
+    :pluginsync => {
+      :default    => true,
+      :type       => :boolean,
+      :desc       => "Whether plugins should be synced with the central server. This setting is
+        deprecated.",
+      :hook => proc { |value|
+        #TRANSLATORS 'pluginsync' is a setting and should not be translated
+        Puppet.deprecation_warning(_("Setting 'pluginsync' is deprecated."))
+      }
+    },
+    :pluginsignore => {
+        :default  => ".svn CVS .git .hg",
+        :desc     => "What files to ignore when pulling down plugins.",
+    }
+  )
+
+  # Central fact information.
+
+    define_settings(
+    :main,
+    :factpath => {
+      :type     => :path,
+      :default  => "$vardir/lib/facter#{File::PATH_SEPARATOR}$vardir/facts",
+      :desc     => "Where Puppet should look for facts.  Multiple directories should
+        be separated by the system path separator character. (The POSIX path
+        separator is ':', and the Windows path separator is ';'.)",
+
+      :call_hook => :on_initialize_and_write, # Call our hook with the default value, so we always get the value added to facter.
+      :hook => proc do |value|
+        paths = value.split(File::PATH_SEPARATOR)
+        Facter.search(*paths)
+      end
+    }
+  )
+
+  define_settings(
+    :transaction,
+    :tags => {
+      :default    => "",
+      :desc       => "Tags to use to find resources.  If this is set, then
+        only resources tagged with the specified tags will be applied.
+        Values must be comma-separated.",
+    },
+    :skip_tags => {
+      :default    => "",
+      :desc       => "Tags to use to filter resources.  If this is set, then
+        only resources not tagged with the specified tags will be applied.
+        Values must be comma-separated.",
+    },
+    :evaltrace => {
+      :default    => false,
+      :type       => :boolean,
+      :desc       => "Whether each resource should log when it is
+        being evaluated.  This allows you to interactively see exactly
+        what is being done.",
+    },
+    :summarize => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "Whether to print a transaction summary.",
+    }
+  )
+
+    define_settings(
+    :main,
+    :external_nodes => {
+        :default  => "none",
+        :desc     => "The external node classifier (ENC) script to use for node data.
+          Puppet combines this data with the main manifest to produce node catalogs.
+
+          To enable this setting, set the `node_terminus` setting to `exec`.
+
+          This setting's value must be the path to an executable command that
+          can produce node information. The command must:
+
+          * Take the name of a node as a command-line argument.
+          * Return a YAML hash with up to three keys:
+            * `classes` --- A list of classes, as an array or hash.
+            * `environment` --- A string.
+            * `parameters` --- A list of top-scope variables to set, as a hash.
+          * For unknown nodes, exit with a non-zero exit code.
+
+          Generally, an ENC script makes requests to an external data source.
+
+          For more info, see [the ENC documentation](https://docs.puppet.com/puppet/latest/nodes_external.html).",
+    }
+    )
+
+        define_settings(
+        :ldap,
+    :ldapssl => {
+      :default  => false,
+      :type   => :boolean,
+      :desc   => "Whether SSL should be used when searching for nodes.
+        Defaults to false because SSL usually requires certificates
+        to be set up on the client side.",
+    },
+    :ldaptls => {
+      :default  => false,
+      :type     => :boolean,
+      :desc     => "Whether TLS should be used when searching for nodes.
+        Defaults to false because TLS usually requires certificates
+        to be set up on the client side.",
+    },
+    :ldapserver => {
+      :default  => "ldap",
+      :desc     => "The LDAP server.  Only used if `node_terminus` is set to `ldap`.",
+    },
+    :ldapport => {
+      :default  => 389,
+      :desc     => "The LDAP port.  Only used if `node_terminus` is set to `ldap`.",
+    },
+
+    :ldapstring => {
+      :default  => "(&(objectclass=puppetClient)(cn=%s))",
+      :desc     => "The search string used to find an LDAP node.",
+    },
+    :ldapclassattrs => {
+      :default  => "puppetclass",
+      :desc     => "The LDAP attributes to use to define Puppet classes.  Values
+        should be comma-separated.",
+    },
+    :ldapstackedattrs => {
+      :default  => "puppetvar",
+      :desc     => "The LDAP attributes that should be stacked to arrays by adding
+        the values in all hierarchy elements of the tree.  Values
+        should be comma-separated.",
+    },
+    :ldapattrs => {
+      :default  => "all",
+      :desc     => "The LDAP attributes to include when querying LDAP for nodes.  All
+        returned attributes are set as variables in the top-level scope.
+        Multiple values should be comma-separated.  The value 'all' returns
+        all attributes.",
+    },
+    :ldapparentattr => {
+      :default  => "parentnode",
+      :desc     => "The attribute to use to define the parent node.",
+    },
+    :ldapuser => {
+      :default  => "",
+      :desc     => "The user to use to connect to LDAP.  Must be specified as a
+        full DN.",
+    },
+    :ldappassword => {
+      :default  => "",
+      :desc     => "The password to use to connect to LDAP.",
+    },
+    :ldapbase => {
+        :default  => "",
+        :desc     => "The search base for LDAP searches.  It's impossible to provide
+          a meaningful default here, although the LDAP libraries might
+          have one already set.  Generally, it should be the 'ou=Hosts'
+          branch under your main directory.",
+    }
+  )
+
+  define_settings(:master,
+    :storeconfigs => {
+      :default  => false,
+      :type     => :boolean,
+      :desc     => "Whether to store each client's configuration, including catalogs, facts,
+        and related data. This also enables the import and export of resources in
+        the Puppet language - a mechanism for exchange resources between nodes.
+
+        By default this uses the 'puppetdb' backend.
+
+        You can adjust the backend using the storeconfigs_backend setting.",
+      # Call our hook with the default value, so we always get the libdir set.
+      :call_hook => :on_initialize_and_write,
+      :hook => proc do |value|
+        require 'puppet/node'
+        require 'puppet/node/facts'
+        if value
+          Puppet::Resource::Catalog.indirection.cache_class = :store_configs
+          Puppet.settings.override_default(:catalog_cache_terminus, :store_configs)
+          Puppet::Node::Facts.indirection.cache_class = :store_configs
+          Puppet::Resource.indirection.terminus_class = :store_configs
+        end
+      end
+    },
+    :storeconfigs_backend => {
+      :type => :terminus,
+      :default => "puppetdb",
+      :desc => "Configure the backend terminus used for StoreConfigs.
+        By default, this uses the PuppetDB store, which must be installed
+        and configured before turning on StoreConfigs."
+    }
+  )
+
+  define_settings(:parser,
+   :max_errors => {
+     :default => 10,
+     :desc => <<-'EOT'
+       Sets the max number of logged/displayed parser validation errors in case
+       multiple errors have been detected. A value of 0 is the same as a value of 1; a
+       minimum of one error is always raised.  The count is per manifest.
+     EOT
+   },
+   :max_warnings => {
+     :default => 10,
+     :desc => <<-'EOT'
+       Sets the max number of logged/displayed parser validation warnings in
+       case multiple warnings have been detected. A value of 0 blocks logging of
+       warnings.  The count is per manifest.
+     EOT
+     },
+  :max_deprecations => {
+    :default => 10,
+    :desc => <<-'EOT'
+      Sets the max number of logged/displayed parser validation deprecation
+      warnings in case multiple deprecation warnings have been detected. A value of 0
+      blocks the logging of deprecation warnings.  The count is per manifest.
+    EOT
+    },
+  :strict_variables => {
+    :default => false,
+    :type => :boolean,
+    :desc => <<-'EOT'
+      Causes an evaluation error when referencing unknown variables. (This does not affect
+      referencing variables that are explicitly set to undef).
+    EOT
+    },
+  :tasks => {
+    :default => false,
+    :type => :boolean,
+    :desc => <<-'EOT'
+      Turns on experimental support for tasks and plans in the puppet language. This is for internal API use only.
+      Do not change this setting.
+    EOT
+    }
+  )
+  define_settings(:puppetdoc,
+    :document_all => {
+        :default  => false,
+        :type     => :boolean,
+        :desc     => "Whether to document all resources when using `puppet doc` to
+          generate manifest documentation.",
+    }
+  )
+
+  define_settings(
+    :main,
+    :rich_data => {
+      :default  => false,
+      :type     => :boolean,
+      :hook    => proc do |value|
+        envs = Puppet.lookup(:environments) { nil }
+        envs.clear_all unless envs.nil?
+      end,
+      :desc     => <<-'EOT'
+        Enables having extended data in the catalog by storing them as a hash with the special key
+        `__pcore_type__`. When enabled, resource containing values of the data types `Binary`, `Regexp`,
+        `SemVer`, `SemVerRange`, `Timespan` and `Timestamp`, as well as instances of types derived
+        from `Object` retain their data type.
+      EOT
+    }
+  )
+
+end