aws-sdk-v1 1.52.0

data/lib/aws/data_pipeline/client.rb

@@ -0,0 +1,36 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+module AWS
+  class DataPipeline
+
+    # Client class for AWS Data Pipeline.
+    class Client < Core::JSONClient
+
+
+      API_VERSION = '2012-10-29'
+
+      signature_version :Version4, 'datapipeline'
+
+      # @api private
+      CACHEABLE_REQUESTS = Set[]
+
+    end
+
+    class Client::V20121029 < Client
+
+      define_client_methods('2012-10-29')
+
+    end
+  end
+end

data/lib/aws/data_pipeline/config.rb

@@ -0,0 +1,18 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+AWS::Core::Configuration.module_eval do
+
+  add_service 'DataPipeline', 'data_pipeline', 'datapipeline'
+
+end

data/lib/aws/data_pipeline/errors.rb

@@ -0,0 +1,20 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+module AWS
+  class DataPipeline
+    module Errors
+      extend Core::LazyErrorClasses
+    end
+  end
+end

data/lib/aws/direct_connect.rb

@@ -0,0 +1,73 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+require 'aws/core'
+require 'aws/direct_connect/config'
+
+module AWS
+
+  # This class is the starting point for working with AWS Import/Export.
+  #
+  # To use AWS Direct Connect you must first
+  # [sign up here](http://aws.amazon.com/directconnect/).
+  #
+  # For more information about AWS AWS Direct Connect:
+  #
+  # * [AWS Direct Connect](http://aws.amazon.com/directconnect/)
+  # * [AWS Direct Connect Documentation](http://aws.amazon.com/documentation/directconnect/)
+  #
+  # # Credentials
+  #
+  # You can setup default credentials for all AWS services via
+  # AWS.config:
+  #
+  #     AWS.config(
+  #       :access_key_id => 'YOUR_ACCESS_KEY_ID',
+  #       :secret_access_key => 'YOUR_SECRET_ACCESS_KEY')
+  #
+  # Or you can set them directly on the AWS::DirectConnect interface:
+  #
+  #     dc = AWS::DirectConnect.new(
+  #       :access_key_id => 'YOUR_ACCESS_KEY_ID',
+  #       :secret_access_key => 'YOUR_SECRET_ACCESS_KEY')
+  #
+  # # Using the Client
+  #
+  # AWS::DirectConnect does not provide higher level abstractions for at
+  # this time.  You can still access all of the API methods using
+  # {AWS::DirectConnect::Client}.  Here is how you access the client and make
+  # a simple request:
+  #
+  #     dc = AWS::DirectConnect.new
+  #
+  #     resp = dc.client.describe_connections
+  #     resp[:connections].each do |connection|
+  #       # ...
+  #     end
+  #
+  # See {Client} for documentation on all of the supported operations.
+  #
+  # @!attribute [r] client
+  #   @return [Client] the low-level DirectConnect client object
+  #
+  class DirectConnect
+
+    autoload :Client, 'aws/direct_connect/client'
+    autoload :Errors, 'aws/direct_connect/errors'
+
+    include Core::ServiceInterface
+
+    endpoint_prefix 'directconnect'
+
+  end
+end

data/lib/aws/direct_connect/client.rb

@@ -0,0 +1,36 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+module AWS
+  class DirectConnect
+
+    # Client class for AWS Direct Connect.
+    class Client < Core::JSONClient
+
+
+      API_VERSION = '2012-10-25'
+
+      signature_version :Version4, 'directconnect'
+
+      # @api private
+      CACHEABLE_REQUESTS = Set[]
+
+    end
+
+    class Client::V20121025 < Client
+
+      define_client_methods('2012-10-25')
+
+    end
+  end
+end

data/lib/aws/direct_connect/config.rb

@@ -0,0 +1,18 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+AWS::Core::Configuration.module_eval do
+
+  add_service 'DirectConnect', 'direct_connect', 'directconnect'
+
+end

data/lib/aws/direct_connect/errors.rb

@@ -0,0 +1,22 @@
+
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+module AWS
+  class DirectConnect
+    # @api private
+    module Errors
+      extend Core::LazyErrorClasses
+    end
+  end
+end

data/lib/aws/dynamo_db.rb

@@ -0,0 +1,230 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+require 'aws/core'
+require 'aws/dynamo_db/config'
+
+module AWS
+
+  # Provides a high-level interface for using DynamoDB.
+  #
+  #     dynamo_db = AWS::DynamoDB.new(
+  #       :access_key_id => '...',
+  #       :secret_access_key => '...')
+  #
+  # # Supported API Version
+  #
+  # Please note, the `AWS::DynamoDB` classes have been built against
+  # the 2011-12-05 API version. Constructing a `AWS::DynamoDB` object
+  # with a newer API version will emit a warning and then ignore the
+  # specified version.
+  #
+  # If you would like to use features of the newer 2012-08-10 API
+  # version, then please construct a DynamoDB client and use the
+  # client API directly.
+  #
+  #     # supports the latest API version
+  #     ddb = AWS::DynamoDB::Client.new(api_verison:'2012-08-10')
+  #
+  # # Tables
+  #
+  # Tables contain items, and organize information into discrete
+  # areas. All items in the table have the same primary key
+  # scheme. You designate the attribute name (or names) to use for the
+  # primary key when you create a table, and the table requires each
+  # item in the table to have a unique primary key value. The first
+  # step in writing data to DynamoDB is to create a table and
+  # designate a table name with a primary key.
+  #
+  #     table = dynamo_db.tables.create(
+  #       "MyTable", 10, 5,
+  #       :hash_key => { :id => :string }
+  #     )
+  #     sleep 1 while table.status == :creating
+  #
+  # See {Table} and {TableCollection} for more information on creating
+  # and managing tables.
+  #
+  # # Items and Attributes
+  #
+  # An item is a collection of one or more attributes, where each
+  # attribute has a string name and a string, number, string set or
+  # number set value.
+  #
+  # The identity of an item consists of its hash key value and -- if
+  # the table's schema includes a range key -- its range key value.
+  #
+  #     item = table.items.put(:id => "abc123")
+  #     item.hash_value # => "abc123"
+  #     item.attributes.set(
+  #       :colors => ["red", "blue"],
+  #       :numbers => [12, 24]
+  #     )
+  #
+  # See {Item} and {ItemCollection} for more information on creating
+  # and managing items.  For more information on managing attributes,
+  # see {AttributeCollection}.
+  #
+  # # Examples
+  #
+  #     # create a table (10 read and 5 write capacity units) with the
+  #     # default schema (id string hash key)
+  #     dynamo_db = AWS::DynamoDB.new
+  #     table = dynamo_db.tables.create('my-table', 10, 5)
+  #
+  #     sleep 1 while table.status == :creating
+  #     table.status #=> :active
+  #
+  #     # get an existing table by name and specify its hash key
+  #     table = dynamo_db.tables['another-table']
+  #     table.hash_key = [:id, :number]
+  #
+  #     # add an item
+  #     item = table.items.create('id' => 12345, 'foo' => 'bar')
+  #
+  #     # add attributes to an item
+  #     item.attributes.add 'category' => %w(demo), 'tags' => %w(sample item)
+  #
+  #     # update an item with mixed add, delete, update
+  #     item.attributes.update do |u|
+  #       u.add 'colors' => %w(red)
+  #       u.set 'category' => 'demo-category'
+  #       u.delete 'foo'
+  #     end
+  #
+  #     # delete attributes
+  #     item.attributes.delete 'colors', 'category'
+  #
+  #     # get attributes
+  #     item.attributes.to_h
+  #     #=> {"id"=>#<BigDecimal:10155f5d0,'0.12345E5',9(18)>, "tags"=>#<Set: {"item", "sample"}>}
+  #
+  #     # delete an item and all of its attributes
+  #     item.delete
+  #
+  # @!attribute [r] client
+  #   @return [Client] the low-level DynamoDB client object
+  class DynamoDB
+
+    autoload :AttributeCollection, 'aws/dynamo_db/attribute_collection'
+    autoload :BatchGet, 'aws/dynamo_db/batch_get'
+    autoload :BatchWrite, 'aws/dynamo_db/batch_write'
+    autoload :Binary, 'aws/dynamo_db/binary'
+    autoload :Client, 'aws/dynamo_db/client'
+    autoload :ClientV2, 'aws/dynamo_db/client_v2'
+    autoload :Errors, 'aws/dynamo_db/errors'
+    autoload :Expectations, 'aws/dynamo_db/expectations'
+    autoload :Item, 'aws/dynamo_db/item'
+    autoload :ItemData, 'aws/dynamo_db/item_data'
+    autoload :ItemCollection, 'aws/dynamo_db/item_collection'
+    autoload :Keys, 'aws/dynamo_db/keys'
+    autoload :PrimaryKeyElement, 'aws/dynamo_db/primary_key_element'
+    autoload :Resource, 'aws/dynamo_db/resource'
+    autoload :Table, 'aws/dynamo_db/table'
+    autoload :TableCollection, 'aws/dynamo_db/table_collection'
+    autoload :Types, 'aws/dynamo_db/types'
+
+    include Core::ServiceInterface
+
+    endpoint_prefix 'dynamodb'
+
+    IGNORING_API_SPECIFIED_MSG = "WARNING: Ignoring DynamoDB API version specified because only '2011-12-05' is supported by this class.  To use another version of the API, invoke the lower level AWS::DynamoDB::Client explicitly."
+
+    def initialize options = {}
+      options = options.dup
+      options[:dynamo_db] ||= {}
+      warn(IGNORING_API_SPECIFIED_MSG) if options[:dynamo_db][:api_version]
+      options[:dynamo_db][:api_version] = '2011-12-05'
+      super(options)
+    end
+
+    # Returns a collection representing all the tables in your account.
+    #
+    # @return [TableCollection]
+    def tables
+      TableCollection.new(:config => config)
+    end
+
+    # Request attributes for items spanning multiple tables.  You configure
+    # you batch get request using a block:
+    #
+    #     attributes = dynamo_db.batch_get do |batch|
+    #       # call methods on batch specify tables, attributes and items
+    #       # ...
+    #     end
+    #
+    # The value returned by #batch_get is an enumerable object that yields
+    # the table name (as a string) and a hash of attributes.  The
+    # enumerable yields once per item received in the batch get.
+    #
+    # ## Configuring the batch
+    #
+    # You can call two methods on the yielded batch object:
+    #
+    #   * {#table}
+    #   * {#items}
+    #
+    # For more information on these methods, see {BatchGet}.
+    #
+    # @yield [String, Hash] Yields the table name as a string and a hash
+    #   of attributes for each item received in the bach get request.
+    #
+    # @return [Enumerable]
+    #
+    def batch_get &block
+      batch = BatchGet.new(:config => config)
+      yield(batch)
+      batch.to_enum(:each)
+    end
+
+    # Yields a batch for writing (put and delete) items across multiple
+    # tables.  You can put and delete items in the same batch.
+    #
+    # @example Putting items across tables
+    #
+    #   # shard data across two tables with batch write
+    #   items = [
+    #     { :id => '123', :color => 'red' },
+    #     { :id => '456', :color => 'blue' },
+    #     { :id => '789', :color => 'green' },
+    #   ]
+    #
+    #   ddb.batch_write do |batch|
+    #     batch.put('table1', items)
+    #     batch.put('table2', items)
+    #   end
+    #
+    # @example Mixing puts and deletes
+    #
+    #   ddb.batch_write do |batch|
+    #     batch.write('table1', :put => [...], :delete => [...])
+    #     batch.write('table2', :put => [...], :delete => [...])
+    #   end
+    #
+    # @yield [BatchWrite]
+    #
+    # @return (see BatchWrite#process!)
+    #
+    # @see BatchWrite
+    # @see BatchWrite#put
+    # @see BatchWrite#delete
+    # @see BatchWrite#write
+    #
+    def batch_write &block
+      batch = BatchWrite.new(:config => config)
+      yield(batch)
+      batch.process!
+    end
+
+  end
+end