aws-sdk-s3 1.164.0 → 1.167.0

data/lib/aws-sdk-s3/types.rb

@@ -634,7 +634,7 @@ module Aws::S3
     # Contains all the possible checksum or digest values for an object.
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -649,7 +649,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -803,7 +803,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -818,7 +818,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -977,7 +977,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -989,7 +989,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -1159,7 +1159,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -1174,7 +1174,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -2273,7 +2273,7 @@ module Aws::S3
     #   @return [Time]
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. For more
     #   information, see [ Checking object integrity][1] in the *Amazon S3
     #   User Guide*.
@@ -2284,7 +2284,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. For more
     #   information, see [ Checking object integrity][1] in the *Amazon S3
     #   User Guide*.
@@ -2340,7 +2340,7 @@ module Aws::S3
     #   @return [Time]
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -2355,7 +2355,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -4414,13 +4414,13 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm `
     #   with the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `SHA1`
     #
-    #   * SHA256
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
@@ -5933,10 +5933,29 @@ module Aws::S3
     #   Container for a lifecycle rule.
     #   @return [Array<Types::LifecycleRule>]
     #
+    # @!attribute [rw] transition_default_minimum_object_size
+    #   Indicates which default minimum object size behavior is applied to
+    #   the lifecycle configuration.
+    #
+    #   * `all_storage_classes_128K` - Objects smaller than 128 KB will not
+    #     transition to any storage class by default.
+    #
+    #   * `varies_by_storage_class` - Objects smaller than 128 KB will
+    #     transition to Glacier Flexible Retrieval or Glacier Deep Archive
+    #     storage classes. By default, all other storage classes will
+    #     prevent transitions smaller than 128 KB.
+    #
+    #   To customize the minimum object size for any transition you can add
+    #   a filter that specifies a custom `ObjectSizeGreaterThan` or
+    #   `ObjectSizeLessThan` in the body of your transition rule. Custom
+    #   filters always take precedence over the default transition behavior.
+    #   @return [String]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLifecycleConfigurationOutput AWS API Documentation
     #
     class GetBucketLifecycleConfigurationOutput < Struct.new(
-      :rules)
+      :rules,
+      :transition_default_minimum_object_size)
       SENSITIVE = []
       include Aws::Structure
     end
@@ -7062,7 +7081,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. For more
     #   information, see [ Checking object integrity][1] in the *Amazon S3
     #   User Guide*.
@@ -7073,7 +7092,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. For more
     #   information, see [ Checking object integrity][1] in the *Amazon S3
     #   User Guide*.
@@ -8244,7 +8263,7 @@ module Aws::S3
     #   @return [Integer]
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -8259,7 +8278,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -11962,7 +11981,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -11972,7 +11991,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -12262,7 +12281,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -12272,7 +12291,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -12852,6 +12871,32 @@ module Aws::S3
       include Aws::Structure
     end
 
+    # @!attribute [rw] transition_default_minimum_object_size
+    #   Indicates which default minimum object size behavior is applied to
+    #   the lifecycle configuration.
+    #
+    #   * `all_storage_classes_128K` - Objects smaller than 128 KB will not
+    #     transition to any storage class by default.
+    #
+    #   * `varies_by_storage_class` - Objects smaller than 128 KB will
+    #     transition to Glacier Flexible Retrieval or Glacier Deep Archive
+    #     storage classes. By default, all other storage classes will
+    #     prevent transitions smaller than 128 KB.
+    #
+    #   To customize the minimum object size for any transition you can add
+    #   a filter that specifies a custom `ObjectSizeGreaterThan` or
+    #   `ObjectSizeLessThan` in the body of your transition rule. Custom
+    #   filters always take precedence over the default transition behavior.
+    #   @return [String]
+    #
+    # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLifecycleConfigurationOutput AWS API Documentation
+    #
+    class PutBucketLifecycleConfigurationOutput < Struct.new(
+      :transition_default_minimum_object_size)
+      SENSITIVE = []
+      include Aws::Structure
+    end
+
     # @!attribute [rw] bucket
     #   The name of the bucket for which to set the configuration.
     #   @return [String]
@@ -12884,13 +12929,32 @@ module Aws::S3
     #   denied).
     #   @return [String]
     #
+    # @!attribute [rw] transition_default_minimum_object_size
+    #   Indicates which default minimum object size behavior is applied to
+    #   the lifecycle configuration.
+    #
+    #   * `all_storage_classes_128K` - Objects smaller than 128 KB will not
+    #     transition to any storage class by default.
+    #
+    #   * `varies_by_storage_class` - Objects smaller than 128 KB will
+    #     transition to Glacier Flexible Retrieval or Glacier Deep Archive
+    #     storage classes. By default, all other storage classes will
+    #     prevent transitions smaller than 128 KB.
+    #
+    #   To customize the minimum object size for any transition you can add
+    #   a filter that specifies a custom `ObjectSizeGreaterThan` or
+    #   `ObjectSizeLessThan` in the body of your transition rule. Custom
+    #   filters always take precedence over the default transition behavior.
+    #   @return [String]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLifecycleConfigurationRequest AWS API Documentation
     #
     class PutBucketLifecycleConfigurationRequest < Struct.new(
       :bucket,
       :checksum_algorithm,
       :lifecycle_configuration,
-      :expected_bucket_owner)
+      :expected_bucket_owner,
+      :transition_default_minimum_object_size)
       SENSITIVE = []
       include Aws::Structure
     end
@@ -13189,13 +13253,13 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm `
     #   with the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `SHA1`
     #
-    #   * SHA256
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
@@ -13991,7 +14055,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -14006,7 +14070,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -14331,13 +14395,13 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm `
     #   with the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `SHA1`
     #
-    #   * SHA256
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
@@ -14363,7 +14427,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -14375,7 +14439,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -17317,7 +17381,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32
-    #   The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -17332,7 +17396,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] checksum_crc32c
-    #   The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    #   The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     #   only be present if it was uploaded with the object. When you use an
     #   API operation on an object that was uploaded using multipart
     #   uploads, this value may not be a direct checksum value of the full
@@ -17522,7 +17586,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -17534,7 +17598,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -17824,7 +17888,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object
     #   returned by the Object Lambda function. This may not match the
     #   checksum for the object stored in Amazon S3. Amazon S3 will perform
     #   validation of the checksum values only when the original `GetObject`
@@ -17845,7 +17909,7 @@ module Aws::S3
     # @!attribute [rw] checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object
     #   returned by the Object Lambda function. This may not match the
     #   checksum for the object stored in Amazon S3. Amazon S3 will perform
     #   validation of the checksum values only when the original `GetObject`
@@ -18108,3 +18172,6 @@ module Aws::S3
 
   end
 end
+
+require "aws-sdk-s3/customizations/types/list_object_versions_output"
+require "aws-sdk-s3/customizations/types/permanent_redirect"

data/lib/aws-sdk-s3.rb

@@ -12,36 +12,7 @@ require 'aws-sdk-kms'
 require 'aws-sigv4'
 require 'aws-sdk-core'
 
-require_relative 'aws-sdk-s3/types'
-require_relative 'aws-sdk-s3/client_api'
-require_relative 'aws-sdk-s3/plugins/endpoints.rb'
-require_relative 'aws-sdk-s3/client'
-require_relative 'aws-sdk-s3/errors'
-require_relative 'aws-sdk-s3/waiters'
-require_relative 'aws-sdk-s3/resource'
-require_relative 'aws-sdk-s3/endpoint_parameters'
-require_relative 'aws-sdk-s3/endpoint_provider'
-require_relative 'aws-sdk-s3/endpoints'
-require_relative 'aws-sdk-s3/bucket'
-require_relative 'aws-sdk-s3/bucket_acl'
-require_relative 'aws-sdk-s3/bucket_cors'
-require_relative 'aws-sdk-s3/bucket_lifecycle'
-require_relative 'aws-sdk-s3/bucket_lifecycle_configuration'
-require_relative 'aws-sdk-s3/bucket_logging'
-require_relative 'aws-sdk-s3/bucket_notification'
-require_relative 'aws-sdk-s3/bucket_policy'
-require_relative 'aws-sdk-s3/bucket_request_payment'
-require_relative 'aws-sdk-s3/bucket_tagging'
-require_relative 'aws-sdk-s3/bucket_versioning'
-require_relative 'aws-sdk-s3/bucket_website'
-require_relative 'aws-sdk-s3/multipart_upload'
-require_relative 'aws-sdk-s3/multipart_upload_part'
-require_relative 'aws-sdk-s3/object'
-require_relative 'aws-sdk-s3/object_acl'
-require_relative 'aws-sdk-s3/object_summary'
-require_relative 'aws-sdk-s3/object_version'
-require_relative 'aws-sdk-s3/customizations'
-require_relative 'aws-sdk-s3/event_streams'
+Aws::Plugins::GlobalConfiguration.add_identifier(:s3)
 
 # This module provides support for Amazon Simple Storage Service. This module is available in the
 # `aws-sdk-s3` gem.
@@ -72,7 +43,40 @@ require_relative 'aws-sdk-s3/event_streams'
 #
 # @!group service
 module Aws::S3
+  autoload :Types, 'aws-sdk-s3/types'
+  autoload :ClientApi, 'aws-sdk-s3/client_api'
+  module Plugins
+    autoload :Endpoints, 'aws-sdk-s3/plugins/endpoints.rb'
+  end
+  autoload :Client, 'aws-sdk-s3/client'
+  autoload :Errors, 'aws-sdk-s3/errors'
+  autoload :Waiters, 'aws-sdk-s3/waiters'
+  autoload :Resource, 'aws-sdk-s3/resource'
+  autoload :EndpointParameters, 'aws-sdk-s3/endpoint_parameters'
+  autoload :EndpointProvider, 'aws-sdk-s3/endpoint_provider'
+  autoload :Endpoints, 'aws-sdk-s3/endpoints'
+  autoload :Bucket, 'aws-sdk-s3/bucket'
+  autoload :BucketAcl, 'aws-sdk-s3/bucket_acl'
+  autoload :BucketCors, 'aws-sdk-s3/bucket_cors'
+  autoload :BucketLifecycle, 'aws-sdk-s3/bucket_lifecycle'
+  autoload :BucketLifecycleConfiguration, 'aws-sdk-s3/bucket_lifecycle_configuration'
+  autoload :BucketLogging, 'aws-sdk-s3/bucket_logging'
+  autoload :BucketNotification, 'aws-sdk-s3/bucket_notification'
+  autoload :BucketPolicy, 'aws-sdk-s3/bucket_policy'
+  autoload :BucketRequestPayment, 'aws-sdk-s3/bucket_request_payment'
+  autoload :BucketTagging, 'aws-sdk-s3/bucket_tagging'
+  autoload :BucketVersioning, 'aws-sdk-s3/bucket_versioning'
+  autoload :BucketWebsite, 'aws-sdk-s3/bucket_website'
+  autoload :MultipartUpload, 'aws-sdk-s3/multipart_upload'
+  autoload :MultipartUploadPart, 'aws-sdk-s3/multipart_upload_part'
+  autoload :Object, 'aws-sdk-s3/object'
+  autoload :ObjectAcl, 'aws-sdk-s3/object_acl'
+  autoload :ObjectSummary, 'aws-sdk-s3/object_summary'
+  autoload :ObjectVersion, 'aws-sdk-s3/object_version'
+  autoload :EventStreams, 'aws-sdk-s3/event_streams'
 
-  GEM_VERSION = '1.164.0'
+  GEM_VERSION = '1.167.0'
 
 end
+
+require_relative 'aws-sdk-s3/customizations'

data/sig/bucket_lifecycle_configuration.rbs

@@ -20,6 +20,9 @@ module Aws
       # https://docs.aws.amazon.com/sdk-for-ruby/v3/api/Aws/S3/BucketLifecycleConfiguration.html#rules-instance_method
       def rules: () -> ::Array[Types::LifecycleRule]
 
+      # https://docs.aws.amazon.com/sdk-for-ruby/v3/api/Aws/S3/BucketLifecycleConfiguration.html#transition_default_minimum_object_size-instance_method
+      def transition_default_minimum_object_size: () -> ("varies_by_storage_class" | "all_storage_classes_128K")
+
       def client: () -> Client
 
       # https://docs.aws.amazon.com/sdk-for-ruby/v3/api/Aws/S3/BucketLifecycleConfiguration.html#load-instance_method
@@ -97,9 +100,10 @@ module Aws
                      },
                    ]
                  },
-                 ?expected_bucket_owner: ::String
-               ) -> ::Aws::EmptyStructure
-             | (?Hash[Symbol, untyped]) -> ::Aws::EmptyStructure
+                 ?expected_bucket_owner: ::String,
+                 ?transition_default_minimum_object_size: ("varies_by_storage_class" | "all_storage_classes_128K")
+               ) -> Types::PutBucketLifecycleConfigurationOutput
+             | (?Hash[Symbol, untyped]) -> Types::PutBucketLifecycleConfigurationOutput
 
       # https://docs.aws.amazon.com/sdk-for-ruby/v3/api/Aws/S3/BucketLifecycleConfiguration.html#bucket-instance_method
       def bucket: () -> Bucket

data/sig/client.rbs

@@ -564,6 +564,7 @@ module Aws
       interface _GetBucketLifecycleConfigurationResponseSuccess
         include ::Seahorse::Client::_ResponseSuccess[Types::GetBucketLifecycleConfigurationOutput]
         def rules: () -> ::Array[Types::LifecycleRule]
+        def transition_default_minimum_object_size: () -> ("varies_by_storage_class" | "all_storage_classes_128K")
       end
       # https://docs.aws.amazon.com/sdk-for-ruby/v3/api/Aws/S3/Client.html#get_bucket_lifecycle_configuration-instance_method
       def get_bucket_lifecycle_configuration: (
@@ -1464,6 +1465,10 @@ module Aws
                                 ) -> ::Seahorse::Client::_ResponseSuccess[::Aws::EmptyStructure]
                               | (Hash[Symbol, untyped] params, ?Hash[Symbol, untyped] options) -> ::Seahorse::Client::_ResponseSuccess[::Aws::EmptyStructure]
 
+      interface _PutBucketLifecycleConfigurationResponseSuccess
+        include ::Seahorse::Client::_ResponseSuccess[Types::PutBucketLifecycleConfigurationOutput]
+        def transition_default_minimum_object_size: () -> ("varies_by_storage_class" | "all_storage_classes_128K")
+      end
       # https://docs.aws.amazon.com/sdk-for-ruby/v3/api/Aws/S3/Client.html#put_bucket_lifecycle_configuration-instance_method
       def put_bucket_lifecycle_configuration: (
                                                 bucket: ::String,
@@ -1523,9 +1528,10 @@ module Aws
                                                     },
                                                   ]
                                                 },
-                                                ?expected_bucket_owner: ::String
-                                              ) -> ::Seahorse::Client::_ResponseSuccess[::Aws::EmptyStructure]
-                                            | (Hash[Symbol, untyped] params, ?Hash[Symbol, untyped] options) -> ::Seahorse::Client::_ResponseSuccess[::Aws::EmptyStructure]
+                                                ?expected_bucket_owner: ::String,
+                                                ?transition_default_minimum_object_size: ("varies_by_storage_class" | "all_storage_classes_128K")
+                                              ) -> _PutBucketLifecycleConfigurationResponseSuccess
+                                            | (Hash[Symbol, untyped] params, ?Hash[Symbol, untyped] options) -> _PutBucketLifecycleConfigurationResponseSuccess
 
       # https://docs.aws.amazon.com/sdk-for-ruby/v3/api/Aws/S3/Client.html#put_bucket_logging-instance_method
       def put_bucket_logging: (

data/sig/types.rbs

@@ -709,6 +709,7 @@ module Aws::S3
 
     class GetBucketLifecycleConfigurationOutput
       attr_accessor rules: ::Array[Types::LifecycleRule]
+      attr_accessor transition_default_minimum_object_size: ("varies_by_storage_class" | "all_storage_classes_128K")
       SENSITIVE: []
     end
 
@@ -1851,11 +1852,17 @@ module Aws::S3
       SENSITIVE: []
     end
 
+    class PutBucketLifecycleConfigurationOutput
+      attr_accessor transition_default_minimum_object_size: ("varies_by_storage_class" | "all_storage_classes_128K")
+      SENSITIVE: []
+    end
+
     class PutBucketLifecycleConfigurationRequest
       attr_accessor bucket: ::String
       attr_accessor checksum_algorithm: ("CRC32" | "CRC32C" | "SHA1" | "SHA256")
       attr_accessor lifecycle_configuration: Types::BucketLifecycleConfiguration
       attr_accessor expected_bucket_owner: ::String
+      attr_accessor transition_default_minimum_object_size: ("varies_by_storage_class" | "all_storage_classes_128K")
       SENSITIVE: []
     end
 

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-s3
 version: !ruby/object:Gem::Version
-  version: 1.164.0
+  version: 1.167.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire:
 bindir: bin
 cert_chain: []
-date: 2024-09-20 00:00:00.000000000 Z
+date: 2024-10-02 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-kms
@@ -93,6 +93,7 @@ files:
 - lib/aws-sdk-s3/customizations/multipart_upload.rb
 - lib/aws-sdk-s3/customizations/object.rb
 - lib/aws-sdk-s3/customizations/object_summary.rb
+- lib/aws-sdk-s3/customizations/object_version.rb
 - lib/aws-sdk-s3/customizations/types/list_object_versions_output.rb
 - lib/aws-sdk-s3/customizations/types/permanent_redirect.rb
 - lib/aws-sdk-s3/encryption.rb