aws-sdk-s3 1.164.0 → 1.167.0

data/lib/aws-sdk-s3/client.rb

@@ -57,8 +57,6 @@ require 'aws-sdk-s3/plugins/streaming_retry.rb'
 require 'aws-sdk-s3/plugins/url_encoded_keys.rb'
 require 'aws-sdk-core/plugins/event_stream_configuration.rb'
 
-Aws::Plugins::GlobalConfiguration.add_identifier(:s3)
-
 module Aws::S3
   # An API client for S3.  To construct a client, you need to configure a `:region` and `:credentials`.
   #
@@ -951,9 +949,9 @@ module Aws::S3
     # @option params [String] :checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object. For
-    #   more information, see [Checking object integrity][1] in the *Amazon S3
-    #   User Guide*.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
+    #   For more information, see [Checking object integrity][1] in the
+    #   *Amazon S3 User Guide*.
     #
     #
     #
@@ -962,7 +960,7 @@ module Aws::S3
     # @option params [String] :checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -4962,15 +4960,6 @@ module Aws::S3
     #   * {Types::DeleteObjectOutput#request_charged #request_charged} => String
     #
     #
-    # @example Example: To delete an object (from a non-versioned bucket)
-    #
-    #   # The following example deletes an object from a non-versioned bucket.
-    #
-    #   resp = client.delete_object({
-    #     bucket: "ExampleBucket", 
-    #     key: "HappyFace.jpg", 
-    #   })
-    #
     # @example Example: To delete an object
     #
     #   # The following example deletes an object from an S3 bucket.
@@ -4984,6 +4973,15 @@ module Aws::S3
     #   {
     #   }
     #
+    # @example Example: To delete an object (from a non-versioned bucket)
+    #
+    #   # The following example deletes an object from a non-versioned bucket.
+    #
+    #   resp = client.delete_object({
+    #     bucket: "ExampleBucket", 
+    #     key: "HappyFace.jpg", 
+    #   })
+    #
     # @example Request syntax with placeholder values
     #
     #   resp = client.delete_object({
@@ -5362,13 +5360,13 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm ` with
     #   the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `SHA1`
     #
-    #   * SHA256
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
@@ -5393,22 +5391,20 @@ module Aws::S3
     #   * {Types::DeleteObjectsOutput#errors #errors} => Array<Types::Error>
     #
     #
-    # @example Example: To delete multiple object versions from a versioned bucket
+    # @example Example: To delete multiple objects from a versioned bucket
     #
-    #   # The following example deletes objects from a bucket. The request specifies object versions. S3 deletes specific object
-    #   # versions and returns the key and versions of deleted objects in the response.
+    #   # The following example deletes objects from a bucket. The bucket is versioned, and the request does not specify the
+    #   # object version to delete. In this case, all versions remain in the bucket and S3 adds a delete marker.
     #
     #   resp = client.delete_objects({
     #     bucket: "examplebucket", 
     #     delete: {
     #       objects: [
     #         {
-    #           key: "HappyFace.jpg", 
-    #           version_id: "2LWg7lQLnY41.maGB5Z6SWW.dcq0vx7b", 
+    #           key: "objectkey1", 
     #         }, 
     #         {
-    #           key: "HappyFace.jpg", 
-    #           version_id: "yoz3HB.ZhCS_tKVEmIOr7qYyyAaZSKVd", 
+    #           key: "objectkey2", 
     #         }, 
     #       ], 
     #       quiet: false, 
@@ -5419,30 +5415,34 @@ module Aws::S3
     #   {
     #     deleted: [
     #       {
-    #         key: "HappyFace.jpg", 
-    #         version_id: "yoz3HB.ZhCS_tKVEmIOr7qYyyAaZSKVd", 
+    #         delete_marker: true, 
+    #         delete_marker_version_id: "A._w1z6EFiCF5uhtQMDal9JDkID9tQ7F", 
+    #         key: "objectkey1", 
     #       }, 
     #       {
-    #         key: "HappyFace.jpg", 
-    #         version_id: "2LWg7lQLnY41.maGB5Z6SWW.dcq0vx7b", 
+    #         delete_marker: true, 
+    #         delete_marker_version_id: "iOd_ORxhkKe_e8G8_oSGxt2PjsCZKlkt", 
+    #         key: "objectkey2", 
     #       }, 
     #     ], 
     #   }
     #
-    # @example Example: To delete multiple objects from a versioned bucket
+    # @example Example: To delete multiple object versions from a versioned bucket
     #
-    #   # The following example deletes objects from a bucket. The bucket is versioned, and the request does not specify the
-    #   # object version to delete. In this case, all versions remain in the bucket and S3 adds a delete marker.
+    #   # The following example deletes objects from a bucket. The request specifies object versions. S3 deletes specific object
+    #   # versions and returns the key and versions of deleted objects in the response.
     #
     #   resp = client.delete_objects({
     #     bucket: "examplebucket", 
     #     delete: {
     #       objects: [
     #         {
-    #           key: "objectkey1", 
+    #           key: "HappyFace.jpg", 
+    #           version_id: "2LWg7lQLnY41.maGB5Z6SWW.dcq0vx7b", 
     #         }, 
     #         {
-    #           key: "objectkey2", 
+    #           key: "HappyFace.jpg", 
+    #           version_id: "yoz3HB.ZhCS_tKVEmIOr7qYyyAaZSKVd", 
     #         }, 
     #       ], 
     #       quiet: false, 
@@ -5453,14 +5453,12 @@ module Aws::S3
     #   {
     #     deleted: [
     #       {
-    #         delete_marker: true, 
-    #         delete_marker_version_id: "A._w1z6EFiCF5uhtQMDal9JDkID9tQ7F", 
-    #         key: "objectkey1", 
+    #         key: "HappyFace.jpg", 
+    #         version_id: "yoz3HB.ZhCS_tKVEmIOr7qYyyAaZSKVd", 
     #       }, 
     #       {
-    #         delete_marker: true, 
-    #         delete_marker_version_id: "iOd_ORxhkKe_e8G8_oSGxt2PjsCZKlkt", 
-    #         key: "objectkey2", 
+    #         key: "HappyFace.jpg", 
+    #         version_id: "2LWg7lQLnY41.maGB5Z6SWW.dcq0vx7b", 
     #       }, 
     #     ], 
     #   }
@@ -6429,6 +6427,7 @@ module Aws::S3
     # @return [Types::GetBucketLifecycleConfigurationOutput] Returns a {Seahorse::Client::Response response} object which responds to the following methods:
     #
     #   * {Types::GetBucketLifecycleConfigurationOutput#rules #rules} => Array<Types::LifecycleRule>
+    #   * {Types::GetBucketLifecycleConfigurationOutput#transition_default_minimum_object_size #transition_default_minimum_object_size} => String
     #
     #
     # @example Example: To get lifecycle configuration on a bucket
@@ -6494,6 +6493,7 @@ module Aws::S3
     #   resp.rules[0].noncurrent_version_expiration.noncurrent_days #=> Integer
     #   resp.rules[0].noncurrent_version_expiration.newer_noncurrent_versions #=> Integer
     #   resp.rules[0].abort_incomplete_multipart_upload.days_after_initiation #=> Integer
+    #   resp.transition_default_minimum_object_size #=> String, one of "varies_by_storage_class", "all_storage_classes_128K"
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetBucketLifecycleConfiguration AWS API Documentation
     #
@@ -8233,49 +8233,49 @@ module Aws::S3
     #   * {Types::GetObjectOutput#object_lock_legal_hold_status #object_lock_legal_hold_status} => String
     #
     #
-    # @example Example: To retrieve an object
+    # @example Example: To retrieve a byte range of an object 
     #
-    #   # The following example retrieves an object for an S3 bucket.
+    #   # The following example retrieves an object for an S3 bucket. The request specifies the range header to retrieve a
+    #   # specific byte range.
     #
     #   resp = client.get_object({
     #     bucket: "examplebucket", 
-    #     key: "HappyFace.jpg", 
+    #     key: "SampleFile.txt", 
+    #     range: "bytes=0-9", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     accept_ranges: "bytes", 
-    #     content_length: 3191, 
-    #     content_type: "image/jpeg", 
-    #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     last_modified: Time.parse("Thu, 15 Dec 2016 01:19:41 GMT"), 
+    #     content_length: 10, 
+    #     content_range: "bytes 0-9/43", 
+    #     content_type: "text/plain", 
+    #     etag: "\"0d94420ffd0bc68cd3d152506b97a9cc\"", 
+    #     last_modified: Time.parse("Thu, 09 Oct 2014 22:57:28 GMT"), 
     #     metadata: {
     #     }, 
-    #     tag_count: 2, 
     #     version_id: "null", 
     #   }
     #
-    # @example Example: To retrieve a byte range of an object 
+    # @example Example: To retrieve an object
     #
-    #   # The following example retrieves an object for an S3 bucket. The request specifies the range header to retrieve a
-    #   # specific byte range.
+    #   # The following example retrieves an object for an S3 bucket.
     #
     #   resp = client.get_object({
     #     bucket: "examplebucket", 
-    #     key: "SampleFile.txt", 
-    #     range: "bytes=0-9", 
+    #     key: "HappyFace.jpg", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     accept_ranges: "bytes", 
-    #     content_length: 10, 
-    #     content_range: "bytes 0-9/43", 
-    #     content_type: "text/plain", 
-    #     etag: "\"0d94420ffd0bc68cd3d152506b97a9cc\"", 
-    #     last_modified: Time.parse("Thu, 09 Oct 2014 22:57:28 GMT"), 
+    #     content_length: 3191, 
+    #     content_type: "image/jpeg", 
+    #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
+    #     last_modified: Time.parse("Thu, 15 Dec 2016 01:19:41 GMT"), 
     #     metadata: {
     #     }, 
+    #     tag_count: 2, 
     #     version_id: "null", 
     #   }
     #
@@ -9291,49 +9291,49 @@ module Aws::S3
     #   * {Types::GetObjectTaggingOutput#tag_set #tag_set} => Array<Types::Tag>
     #
     #
-    # @example Example: To retrieve tag set of a specific object version
+    # @example Example: To retrieve tag set of an object
     #
-    #   # The following example retrieves tag set of an object. The request specifies object version.
+    #   # The following example retrieves tag set of an object.
     #
     #   resp = client.get_object_tagging({
     #     bucket: "examplebucket", 
-    #     key: "exampleobject", 
-    #     version_id: "ydlaNkwWm0SfKJR.T1b1fIdPRbldTYRI", 
+    #     key: "HappyFace.jpg", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     tag_set: [
     #       {
-    #         key: "Key1", 
-    #         value: "Value1", 
+    #         key: "Key4", 
+    #         value: "Value4", 
+    #       }, 
+    #       {
+    #         key: "Key3", 
+    #         value: "Value3", 
     #       }, 
     #     ], 
-    #     version_id: "ydlaNkwWm0SfKJR.T1b1fIdPRbldTYRI", 
+    #     version_id: "null", 
     #   }
     #
-    # @example Example: To retrieve tag set of an object
+    # @example Example: To retrieve tag set of a specific object version
     #
-    #   # The following example retrieves tag set of an object.
+    #   # The following example retrieves tag set of an object. The request specifies object version.
     #
     #   resp = client.get_object_tagging({
     #     bucket: "examplebucket", 
-    #     key: "HappyFace.jpg", 
+    #     key: "exampleobject", 
+    #     version_id: "ydlaNkwWm0SfKJR.T1b1fIdPRbldTYRI", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     tag_set: [
     #       {
-    #         key: "Key4", 
-    #         value: "Value4", 
-    #       }, 
-    #       {
-    #         key: "Key3", 
-    #         value: "Value3", 
+    #         key: "Key1", 
+    #         value: "Value1", 
     #       }, 
     #     ], 
-    #     version_id: "null", 
+    #     version_id: "ydlaNkwWm0SfKJR.T1b1fIdPRbldTYRI", 
     #   }
     #
     # @example Request syntax with placeholder values
@@ -9739,7 +9739,11 @@ module Aws::S3
     #     have the `s3:GetObject` permission. You need the relevant read
     #     object (or version) permission for this operation. For more
     #     information, see [Actions, resources, and condition keys for
-    #     Amazon S3][2] in the *Amazon S3 User Guide*.
+    #     Amazon S3][2] in the *Amazon S3 User Guide*. For more information
+    #     about the permissions to S3 API operations by S3 resource types,
+    #     see [Required permissions for Amazon S3 API
+    #     operations](/AmazonS3/latest/userguide/using-with-s3-policy-actions.html)
+    #     in the *Amazon S3 User Guide*.
     #
     #     If the object you request doesn't exist, the error that Amazon S3
     #     returns depends on whether you also have the `s3:ListBucket`
@@ -13751,23 +13755,22 @@ module Aws::S3
     # lifecycle configuration. For information about lifecycle
     # configuration, see [Managing your storage lifecycle][1].
     #
-    # <note markdown="1"> Bucket lifecycle configuration now supports specifying a lifecycle
-    # rule using an object key name prefix, one or more object tags, object
-    # size, or any combination of these. Accordingly, this section describes
-    # the latest API. The previous version of the API supported filtering
-    # based only on an object key name prefix, which is supported for
-    # backward compatibility. For the related API description, see
-    # [PutBucketLifecycle][2].
-    #
-    #  </note>
-    #
     # Rules
     #
     # : You specify the lifecycle configuration in your request body. The
     #   lifecycle configuration is specified as XML consisting of one or
     #   more rules. An Amazon S3 Lifecycle configuration can have up to
-    #   1,000 rules. This limit is not adjustable. Each rule consists of the
-    #   following:
+    #   1,000 rules. This limit is not adjustable.
+    #
+    #   Bucket lifecycle configuration supports specifying a lifecycle rule
+    #   using an object key name prefix, one or more object tags, object
+    #   size, or any combination of these. Accordingly, this section
+    #   describes the latest API. The previous version of the API supported
+    #   filtering based only on an object key name prefix, which is
+    #   supported for backward compatibility. For the related API
+    #   description, see [PutBucketLifecycle][2].
+    #
+    #   A lifecycle rule consists of the following:
     #
     #   * A filter identifying a subset of objects to which the rule
     #     applies. The filter can be based on a key name prefix, object
@@ -13858,7 +13861,26 @@ module Aws::S3
     #   you provide does not match the actual owner of the bucket, the request
     #   fails with the HTTP status code `403 Forbidden` (access denied).
     #
-    # @return [Struct] Returns an empty {Seahorse::Client::Response response}.
+    # @option params [String] :transition_default_minimum_object_size
+    #   Indicates which default minimum object size behavior is applied to the
+    #   lifecycle configuration.
+    #
+    #   * `all_storage_classes_128K` - Objects smaller than 128 KB will not
+    #     transition to any storage class by default.
+    #
+    #   * `varies_by_storage_class` - Objects smaller than 128 KB will
+    #     transition to Glacier Flexible Retrieval or Glacier Deep Archive
+    #     storage classes. By default, all other storage classes will prevent
+    #     transitions smaller than 128 KB.
+    #
+    #   To customize the minimum object size for any transition you can add a
+    #   filter that specifies a custom `ObjectSizeGreaterThan` or
+    #   `ObjectSizeLessThan` in the body of your transition rule. Custom
+    #   filters always take precedence over the default transition behavior.
+    #
+    # @return [Types::PutBucketLifecycleConfigurationOutput] Returns a {Seahorse::Client::Response response} object which responds to the following methods:
+    #
+    #   * {Types::PutBucketLifecycleConfigurationOutput#transition_default_minimum_object_size #transition_default_minimum_object_size} => String
     #
     #
     # @example Example: Put bucket lifecycle
@@ -13950,8 +13972,13 @@ module Aws::S3
     #       ],
     #     },
     #     expected_bucket_owner: "AccountId",
+    #     transition_default_minimum_object_size: "varies_by_storage_class", # accepts varies_by_storage_class, all_storage_classes_128K
     #   })
     #
+    # @example Response structure
+    #
+    #   resp.transition_default_minimum_object_size #=> String, one of "varies_by_storage_class", "all_storage_classes_128K"
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/PutBucketLifecycleConfiguration AWS API Documentation
     #
     # @overload put_bucket_lifecycle_configuration(params = {})
@@ -14704,13 +14731,13 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm ` with
     #   the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `SHA1`
     #
-    #   * SHA256
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
@@ -15885,13 +15912,13 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm ` with
     #   the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `SHA1`
     #
-    #   * SHA256
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
@@ -15914,9 +15941,9 @@ module Aws::S3
     # @option params [String] :checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object. For
-    #   more information, see [Checking object integrity][1] in the *Amazon S3
-    #   User Guide*.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
+    #   For more information, see [Checking object integrity][1] in the
+    #   *Amazon S3 User Guide*.
     #
     #
     #
@@ -15925,7 +15952,7 @@ module Aws::S3
     # @option params [String] :checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -16323,22 +16350,22 @@ module Aws::S3
     #   * {Types::PutObjectOutput#request_charged #request_charged} => String
     #
     #
-    # @example Example: To upload an object and specify optional tags
+    # @example Example: To upload an object and specify canned ACL.
     #
-    #   # The following example uploads an object. The request specifies optional object tags. The bucket is versioned, therefore
-    #   # S3 returns version ID of the newly created object.
+    #   # The following example uploads and object. The request specifies optional canned ACL (access control list) to all READ
+    #   # access to authenticated users. If the bucket is versioning enabled, S3 returns version ID in response.
     #
     #   resp = client.put_object({
-    #     body: "c:\\HappyFace.jpg", 
+    #     acl: "authenticated-read", 
+    #     body: "filetoupload", 
     #     bucket: "examplebucket", 
-    #     key: "HappyFace.jpg", 
-    #     tagging: "key1=value1&key2=value2", 
+    #     key: "exampleobject", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     version_id: "psM2sYY4.o1501dSx8wMvnkOzSBB.V4a", 
+    #     version_id: "Kirh.unyZwjQ69YxcQLA8z4F5j3kJJKr", 
     #   }
     #
     # @example Example: To create an object.
@@ -16357,42 +16384,39 @@ module Aws::S3
     #     version_id: "Bvq0EDKxOcXLJXNo_Lkz37eM3R4pfzyQ", 
     #   }
     #
-    # @example Example: To upload object and specify user-defined metadata
+    # @example Example: To upload an object
     #
-    #   # The following example creates an object. The request also specifies optional metadata. If the bucket is versioning
-    #   # enabled, S3 returns version ID in response.
+    #   # The following example uploads an object to a versioning-enabled bucket. The source file is specified using Windows file
+    #   # syntax. S3 returns VersionId of the newly created object.
     #
     #   resp = client.put_object({
-    #     body: "filetoupload", 
+    #     body: "HappyFace.jpg", 
     #     bucket: "examplebucket", 
-    #     key: "exampleobject", 
-    #     metadata: {
-    #       "metadata1" => "value1", 
-    #       "metadata2" => "value2", 
-    #     }, 
+    #     key: "HappyFace.jpg", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     version_id: "pSKidl4pHBiNwukdbcPXAIs.sshFFOc0", 
+    #     version_id: "tpf3zF08nBplQK1XLOefGskR7mGDwcDk", 
     #   }
     #
-    # @example Example: To upload an object
+    # @example Example: To upload an object and specify optional tags
     #
-    #   # The following example uploads an object to a versioning-enabled bucket. The source file is specified using Windows file
-    #   # syntax. S3 returns VersionId of the newly created object.
+    #   # The following example uploads an object. The request specifies optional object tags. The bucket is versioned, therefore
+    #   # S3 returns version ID of the newly created object.
     #
     #   resp = client.put_object({
-    #     body: "HappyFace.jpg", 
+    #     body: "c:\\HappyFace.jpg", 
     #     bucket: "examplebucket", 
     #     key: "HappyFace.jpg", 
+    #     tagging: "key1=value1&key2=value2", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     version_id: "tpf3zF08nBplQK1XLOefGskR7mGDwcDk", 
+    #     version_id: "psM2sYY4.o1501dSx8wMvnkOzSBB.V4a", 
     #   }
     #
     # @example Example: To upload an object and specify server-side encryption and object tags
@@ -16415,42 +16439,45 @@ module Aws::S3
     #     version_id: "Ri.vC6qVlA4dEnjgRV4ZHsHoFIjqEMNt", 
     #   }
     #
-    # @example Example: To upload an object and specify canned ACL.
+    # @example Example: To upload an object (specify optional headers)
     #
-    #   # The following example uploads and object. The request specifies optional canned ACL (access control list) to all READ
-    #   # access to authenticated users. If the bucket is versioning enabled, S3 returns version ID in response.
+    #   # The following example uploads an object. The request specifies optional request headers to directs S3 to use specific
+    #   # storage class and use server-side encryption.
     #
     #   resp = client.put_object({
-    #     acl: "authenticated-read", 
-    #     body: "filetoupload", 
+    #     body: "HappyFace.jpg", 
     #     bucket: "examplebucket", 
-    #     key: "exampleobject", 
+    #     key: "HappyFace.jpg", 
+    #     server_side_encryption: "AES256", 
+    #     storage_class: "STANDARD_IA", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     version_id: "Kirh.unyZwjQ69YxcQLA8z4F5j3kJJKr", 
+    #     server_side_encryption: "AES256", 
+    #     version_id: "CG612hodqujkf8FaaNfp8U..FIhLROcp", 
     #   }
     #
-    # @example Example: To upload an object (specify optional headers)
+    # @example Example: To upload object and specify user-defined metadata
     #
-    #   # The following example uploads an object. The request specifies optional request headers to directs S3 to use specific
-    #   # storage class and use server-side encryption.
+    #   # The following example creates an object. The request also specifies optional metadata. If the bucket is versioning
+    #   # enabled, S3 returns version ID in response.
     #
     #   resp = client.put_object({
-    #     body: "HappyFace.jpg", 
+    #     body: "filetoupload", 
     #     bucket: "examplebucket", 
-    #     key: "HappyFace.jpg", 
-    #     server_side_encryption: "AES256", 
-    #     storage_class: "STANDARD_IA", 
+    #     key: "exampleobject", 
+    #     metadata: {
+    #       "metadata1" => "value1", 
+    #       "metadata2" => "value2", 
+    #     }, 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     server_side_encryption: "AES256", 
-    #     version_id: "CG612hodqujkf8FaaNfp8U..FIhLROcp", 
+    #     version_id: "pSKidl4pHBiNwukdbcPXAIs.sshFFOc0", 
     #   }
     #
     # @example Streaming a file from disk
@@ -18654,9 +18681,9 @@ module Aws::S3
     # @option params [String] :checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object. For
-    #   more information, see [Checking object integrity][1] in the *Amazon S3
-    #   User Guide*.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
+    #   For more information, see [Checking object integrity][1] in the
+    #   *Amazon S3 User Guide*.
     #
     #
     #
@@ -18665,7 +18692,7 @@ module Aws::S3
     # @option params [String] :checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -19314,45 +19341,45 @@ module Aws::S3
     #   * {Types::UploadPartCopyOutput#request_charged #request_charged} => String
     #
     #
-    # @example Example: To upload a part by copying byte range from an existing object as data source
+    # @example Example: To upload a part by copying data from an existing object as data source
     #
-    #   # The following example uploads a part of a multipart upload by copying a specified byte range from an existing object as
-    #   # data source.
+    #   # The following example uploads a part of a multipart upload by copying data from an existing object as data source.
     #
     #   resp = client.upload_part_copy({
     #     bucket: "examplebucket", 
     #     copy_source: "/bucketname/sourceobjectkey", 
-    #     copy_source_range: "bytes=1-100000", 
     #     key: "examplelargeobject", 
-    #     part_number: 2, 
+    #     part_number: 1, 
     #     upload_id: "exampleuoh_10OhKhT7YukE9bjzTPRiuaCotmZM_pFngJFir9OZNrSr5cWa3cq3LZSUsfjI4FI7PkP91We7Nrw--", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     copy_part_result: {
-    #       etag: "\"65d16d19e65a7508a51f043180edcc36\"", 
-    #       last_modified: Time.parse("2016-12-29T21:44:28.000Z"), 
+    #       etag: "\"b0c6f0e7e054ab8fa2536a2677f8734d\"", 
+    #       last_modified: Time.parse("2016-12-29T21:24:43.000Z"), 
     #     }, 
     #   }
     #
-    # @example Example: To upload a part by copying data from an existing object as data source
+    # @example Example: To upload a part by copying byte range from an existing object as data source
     #
-    #   # The following example uploads a part of a multipart upload by copying data from an existing object as data source.
+    #   # The following example uploads a part of a multipart upload by copying a specified byte range from an existing object as
+    #   # data source.
     #
     #   resp = client.upload_part_copy({
     #     bucket: "examplebucket", 
     #     copy_source: "/bucketname/sourceobjectkey", 
+    #     copy_source_range: "bytes=1-100000", 
     #     key: "examplelargeobject", 
-    #     part_number: 1, 
+    #     part_number: 2, 
     #     upload_id: "exampleuoh_10OhKhT7YukE9bjzTPRiuaCotmZM_pFngJFir9OZNrSr5cWa3cq3LZSUsfjI4FI7PkP91We7Nrw--", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     copy_part_result: {
-    #       etag: "\"b0c6f0e7e054ab8fa2536a2677f8734d\"", 
-    #       last_modified: Time.parse("2016-12-29T21:24:43.000Z"), 
+    #       etag: "\"65d16d19e65a7508a51f043180edcc36\"", 
+    #       last_modified: Time.parse("2016-12-29T21:44:28.000Z"), 
     #     }, 
     #   }
     #
@@ -19551,7 +19578,7 @@ module Aws::S3
     # @option params [String] :checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object
     #   returned by the Object Lambda function. This may not match the
     #   checksum for the object stored in Amazon S3. Amazon S3 will perform
     #   validation of the checksum values only when the original `GetObject`
@@ -19571,7 +19598,7 @@ module Aws::S3
     # @option params [String] :checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object
     #   returned by the Object Lambda function. This may not match the
     #   checksum for the object stored in Amazon S3. Amazon S3 will perform
     #   validation of the checksum values only when the original `GetObject`
@@ -19814,7 +19841,7 @@ module Aws::S3
         tracer: tracer
       )
       context[:gem_name] = 'aws-sdk-s3'
-      context[:gem_version] = '1.164.0'
+      context[:gem_version] = '1.167.0'
       Seahorse::Client::Request.new(handlers, context)
     end