avm-tools 0.129.0 → 0.129.1

data/sub/eac_git/vendor/git-subrepo/doc/comparison.swim

@@ -1,35 +0,0 @@
-= Comparing `submodule` and `subrepo`
-
-This document compares Git's `submodule` command to the new `subrepo` command,
-with examples and discussion of all the common operations. I'll use the term
-"External" to mean the general concept of an external repo that might be used
-as a submodule or a subrepo.
-
-= Overview
-
-
-
-= Adding a new External
-
-As an owner or collaborator, you have decided to add a new External to your
-repo:
-
-- Submodule :: `git submodule add git@github.com/user/external`
-- Subtree :: `git subtree --squash --prefix=external git@github.com/user/external`
-- Subrepo :: `git subrepo clone git@github.com/user/external`
-
-/…to be completed…/
-
-= Updating from a changed External
-
-= Pushing External changes upstream
-
-= Moving/Renaming an External
-
-= Making an External on a branch
-
-= Changing the tracking branch of an External
-
-= Removing an External
-
-= Migration from One to the Other

data/sub/eac_git/vendor/git-subrepo/doc/git-subrepo.swim

@@ -1,608 +0,0 @@
-git-subrepo
-===========
-
-Git Submodule Alternative
-
-<badge travis ingydotnet/git-subrepo>
-
-= Synopsis
-
-  git subrepo -h    # Help Overview
-
-  git subrepo clone <remote-url> [<subdir>]
-  git subrepo init <subdir>
-  git subrepo pull <subdir>
-  git subrepo push <subdir>
-
-  git subrepo fetch <subdir>
-  git subrepo branch <subdir>
-  git subrepo commit <subdir>
-  git subrepo config <subdir>
-
-  git subrepo status [<subdir>]
-  git subrepo clean <subdir>
-
-  git subrepo help [<command> | --all]
-  git subrepo version
-  git subrepo upgrade
-
-= Description
-
-This git command "clones" an external git repo into a subdirectory of your
-repo. Later on, upstream changes can be pulled in, and local changes can be
-pushed back. Simple.
-
-= Benefits
-
-This command is an improvement from `git-submodule` and `git-subtree`; two
-other git commands with similar goals, but various problems.
-
-It assumes there are 3 main roles of people interacting with a repo, and
-attempts to serve them all well:
-
-* *owner* - The person who authors\/owns\/maintains a repo.
-* *users* - People who are just using/installing the repo.
-* *collaborators* - People who commit code to the repo and subrepos.
-
-The `git-subrepo` command benefits these roles in the following ways:
-
-* Simple and intuitive commandline usage (with tab completion).
-* Users get your repo and all your subrepos just by cloning your repo.
-* Users do not need to install `git-subrepo`, ever.
-* Collaborators do not need to install unless they want to push/pull.
-* Collaborators know when a subdir is a subrepo (it has a `.gitrepo` file).
-* The `.gitrepo` file never gets pushed back to the subrepo upstream.
-* Well named branches and remotes are generated for manual operations.
-* Owners do not deal with the complications of keeping submodules in sync.
-* Subrepo repositories can contain subrepos themselves.
-* Branching with subrepos JustWorks™.
-* Different branches can have different subrepos in different states, etc.
-* Moving\/renaming\/deleting a subrepo subdir JustWorks™.
-* You can `init` an existing subdirectory into a subrepo.
-* Your git history is kept squeaky clean.
-* Upstream history (clone/pull) is condensed into a single commit.
-* Pulls can use a `merge`, `rebase` or `force` strategies.
-* You can see the subrepo history with `git log subrepo/<subdir>/fetch`.
-* Commits pushed back upstream are *not* condensed (by default).
-* Trivial to try any subrepo operations and then reset back.
-* No configuration required.
-* Does not introduce history that messes up other git commands.
-* Fixes known rebase failures with `git-subtree`.
-
-= Installation
-
-The best short answer is:
-
-  git clone https://github.com/ingydotnet/git-subrepo /path/to/git-subrepo
-  echo 'source /path/to/git-subrepo/.rc' >> ~/.bashrc
-
-The complete "Installation Instructions" can be found below.
-
-Note: git-subrepo needs a git version (> 2.7) that supports worktree:s.
-
-= Commands
-
-All the *subrepo* commands use names of actual Git commands and try to do
-operations that are similar to their Git counterparts. They also attempt to
-give similar output in an attempt to make the subrepo usage intuitive to
-experienced Git users.
-
-Please note that the commands are /not/ exact equivalents, and do not take all
-the same arguments. Keep reading…
-
-- `git subrepo clone <repository> [<subdir>] [-b <branch>] [-f] [-m <msg>] [-e] [--method <merge|rebase>]`
-
-  Add a repository as a subrepo in a subdir of your repository.
-
-  This is similar in feel to `git clone`. You just specify the remote repo
-  url, and optionally a sub-directory and/or branch name. The repo will be
-  fetched and merged into the subdir.
-
-  The subrepo history is /squashed/ into a single commit that contains the
-  reference information. This information is also stored in a special file
-  called `<subdir>/.gitrepo`. The presence of this file indicates that the
-  directory is a subrepo.
-
-  All subsequent commands refer to the subrepo by the name of the /subdir/.
-  From the subdir, all the current information about the subrepo can be
-  obtained.
-
-  The `--force` option will "reclone" (completely replace) an existing subdir.
-
-  The `--method` option will decide how the join process between branches are
-   performed. The default option is merge.
-
-  The `clone` command accepts the `--branch=` `--edit`, `--force` and
-  `--message=` options.
-
-- `git subrepo init <subdir> [-r <remote>] [-b <branch>] [--method <merge|rebase>]`
-
-  Turn an existing subdirectory into a subrepo.
-
-  If you want to expose a subdirectory of your project as a published subrepo,
-  this command will do that. It will split out the content of a normal
-  subdirectory into a branch and start tracking it as a subrepo. Afterwards
-  your original repo will look exactly the same except that there will be a
-  `<subdir>/.gitrepo` file.
-
-  If you specify the `--remote` (and optionally the `--branch`) option, the
-  values will be added to the `<subdir>/.gitrepo` file. The `--remote` option
-  is the upstream URL, and the `--branch` option is the upstream branch to push
-  to. These values will be needed to do a `git subrepo push` command, but they
-  can be provided later on the `push` command (and saved to `<subdir>/.gitrepo`
-  if you also specify the `--update` option).
-
-  Note: You will need to create the empty upstream repo and push to it on your
-  own, using `git subrepo push <subdir>`.
-
-  The `--method` option will decide how the join process between branches
-  are performed. The default option is merge.
-
-  The `init` command accepts the `--branch=` and `--remote=` options.
-
-- `git subrepo pull <subdir>|--all [-M|-R|-f] [-m <msg>] [-e] [-b <branch>] [-r <remote>] [-u]`
-
-  Update the subrepo subdir with the latest upstream changes.
-
-  The `pull` command fetches the latest content from the remote branch pointed
-  to by the subrepo's `.gitrepo` file, and then tries to merge the changes into
-  the corresponding subdir. It does this by making a branch of the local
-  commits to the subdir and then merging or rebasing (see below) it with the
-  fetched upstream content. After the merge, the content of the new branch
-  replaces your subdir, the `.gitrepo` file is updated and a single 'pull'
-  commit is added to your mainline history.
-
-  The `pull` command will attempt to do the following commands in one go:
-
-    git subrepo fetch <subdir>
-    git subrepo branch <subdir>
-    git merge/rebase subrepo/<subdir>/fetch subrepo/<subdir>
-    git subrepo commit <subdir>
-    # Only needed for a consequential push:
-    git update-ref refs/subrepo/<subdir>/pull subrepo/<subdir>
-
-  In other words, you could do all the above commands yourself, for the same
-  effect. If any of the commands fail, subrepo will stop and tell you to finish
-  this by hand. Generally a failure would be in the merge or rebase part, where
-  conflicts can happen. Since Git has lots of ways to resolve conflicts to your
-  personal tastes, the subrepo command defers to letting you do this by hand.
-
-  When pulling new data, the method selected in clone/init is used. This has
-  no effect on the final result of the pull, since it becomes a single commit.
-  But it does affect the resulting `subrepo/<subdir>` branch, which is often
-  used for a subrepo `push` command. See 'push' below for more information.
-  If you want to change the method you can use the `config` command for this.
-
-  When you pull you can assume a fast-forward strategy (default) or you can
-  specify a `--rebase`, `--merge` or `--force` strategy. The latter is the same
-  as a `clone --force` operation, using the current remote and branch.
-
-  Like the `clone` command, `pull` will squash all the changes (since the last
-  pull or clone) into one commit. This keeps your mainline history nice and
-  clean. You can easily see the subrepo's history with the `git log` command:
-
-    git log refs/subrepo/<subdir>/fetch
-
-  The set of commands used above are described in detail below.
-
-  The `pull` command accepts the `--all`, `--branch=`, `--edit`, `--force`,
-  `--message=`, `--remote=` and `--update` options.
-
-- `git subrepo push <subdir>|--all [<branch>] [-r <remote>] [-b <branch>] [-M|-R] [-u] [-f] [-s] [-N]`
-
-  Push a properly merged subrepo branch back upstream.
-
-  This command takes the subrepo branch from a successful pull command and
-  pushes the history back to its designated remote and branch. You can also use
-  the `branch` command and merge things yourself before pushing if you want to
-  (although that is probably a rare use case).
-
-  The `push` command requires a branch that has been properly merged/rebased
-  with the upstream HEAD (unless the upstream HEAD is empty, which is common
-  when doing a first `push` after an `init`). That means the upstream HEAD is
-  one of the commits in the branch.
-
-  By default the branch ref `refs/subrepo/<subdir>/pull` will be pushed, but
-  you can specify a (properly merged) branch to push.
-
-  After that, the `push` command just checks that the branch contains the
-  upstream HEAD and then pushes it upstream.
-
-  The `--force` option will do a force push. Force pushes are typically
-  discouraged. Only use this option if you fully understand it. (The `--force`
-  option will NOT check for a proper merge. ANY branch will be force pushed!)
-
-  The `push` command accepts the `--all`, `--branch=`, `--dry-run`, `--force`,
-  `--merge`, `--rebase`, `--remote=`, `--squash` and `--update` options.
-
-- `git subrepo fetch <subdir>|--all [-r <remote>] [-b <branch>]`
-
-  Fetch the remote/upstream content for a subrepo.
-
-  It will create a Git reference called `subrepo/<subdir>/fetch` that points at
-  the same commit as `FETCH_HEAD`. It will also create a remote called
-  `subrepo/<subdir>`. These are temporary and you can easily remove them with
-  the subrepo `clean` command.
-
-  The `fetch` command accepts the `--all`, `--branch=` and `--remote=` options.
-
-- `git subrepo branch <subdir>|--all [-f] [-F]`
-
-  Create a branch with local subrepo commits.
-
-  Scan the history of the mainline for all the commits that affect the `subdir`
-  and create a new branch from them called `subrepo/<subdir>`.
-
-  This is useful for doing `pull` and `push` commands by hand.
-
-  Use the `--force` option to write over an existing `subrepo/<subdir>` branch.
-
-  The `branch` command accepts the `--all`, `--fetch` and `--force` options.
-
-- `git subrepo commit <subdir> [<subrepo-ref>] [-m <msg>] [-e] [-f] [-F]`
-
-  Add subrepo branch to current history as a single commit.
-
-  This command is generally used after a hand-merge. You have done a `subrepo
-  branch` and merged (rebased) it with the upstream. This command takes the
-  HEAD of that branch, puts its content into the subrepo subdir and adds a new
-  commit for it to the top of your mainline history.
-
-  This command requires that the upstream HEAD be in the `subrepo/<subdir>`
-  branch history. That way the same branch can push upstream. Use the
-  `--force` option to commit anyway.
-
-  The `commit` command accepts the `--edit`, `--fetch`, `--force` and
-  `--message=` options.
-
-- `git subrepo status [<subdir>|--all|--ALL] [-F] [-q|-v]`
-
-  Get the status of a subrepo. Uses the `--all` option by default. If the
-  `--quiet` flag is used, just print the subrepo names, one per line.
-
-  The `--verbose` option will show all the recent local and upstream commits.
-
-  Use `--ALL` to show the subrepos of the subrepos (ie the "subsubrepos"), if
-  any.
-
-  The `status` command accepts the `--all`, `--ALL`, `--fetch`, `--quiet` and
-  `--verbose` options.
-
-- `git subrepo clean <subdir>|--all|--ALL [-f]`
-
-  Remove artifacts created by `fetch` and `branch` commands.
-
-  The `fetch` and `branch` operations (and other commands that call them)
-  create temporary things like refs, branches and remotes. This command
-  removes all those things.
-
-  Use `--force` to remove refs. Refs are not removed by default because they
-  are sometimes needed between commands.
-
-  Use `--all` to clean up after all the current subrepos. Sometimes you might
-  change to a branch where a subrepo doesn't exist, and then `--all` won't find
-  it. Use `--ALL` to remove any artifacts that were ever created by subrepo.
-
-  To remove ALL subrepo artifacts:
-
-    git subrepo clean --ALL --force
-
-  The `clean` command accepts the `--all`, `--ALL`, and `--force` options.
-
-- `git subrepo config <subdir> <option> [<value>] [-f]`
-
-  Read or update configuration values in the subdir/.gitrepo file.
-
-  Because most of the values stored in the .gitrepo file are generated you
-  will need to use `--force` if you want to change anything else then the
-  `method` option.
-
-  Example to update the `method` option for a subrepo:
-
-    git subrepo config foo method rebase
-
-- `git subrepo help [<command>|--all]`
-
-  Same as `git help subrepo`. Will launch the manpage. For the shorter usage,
-  use `git subrepo -h`.
-
-  Use `git subrepo help <command>` to get help for a specific command. Use
-  `--all` to get a summary of all commands.
-
-  The `help` command accepts the `--all` option.
-
-- `git subrepo version [-q|-v]`
-
-  This command will display version information about git-subrepo and its
-  environment. For just the version number, use `git subrepo --version`. Use
-  `--verbose` for more version info, and `--quiet` for less.
-
-  The `version` command accepts the `--quiet` and `--verbose` options.
-
-- `git subrepo upgrade`
-
-  Upgrade the `git-subrepo` software itself. This simply does a `git pull` on
-  the git repository that the code is running from. It only works if you are on
-  the `master` branch. It won't work if you installed `git-subrepo` using `make
-  install`; in that case you'll need to `make install` from the latest code.
-
-= Command Options
-
-- `-h`
-
-  Show a brief view of the commands and options.
-
-- `--help`
-
-  Gives an overview of the help options available for the subrepo command.
-
-- `--version`
-
-  Print the git-subrepo version. Just the version number. Try the `version`
-  command for more version info.
-
-- `--all` (`-a`)
-
-  If you have multiple subrepos, issue the command to all of them (if
-  applicable).
-
-- `--ALL` (`-A`)
-
-  If you have subrepos that also have subrepos themselves, issue the command to
-  ALL of them. Note that the `--ALL` option only works for a subset of the
-  commands that `--all` works for.
-
-- `--branch=<branch-name>` (`-b <branch-name>`)
-
-  Use a different upstream branch-name than the remote HEAD or the one saved in
-  `.gitrepo` locally.
-
-- `--dry-run` (`-N`)
-
-  For the push command, do everything up until the push and then print out the
-  actual `git push` command needed to finish the operation.
-
-- `--edit` (`-e`)
-
-  Edit the commit message before committing.
-
-- `--fetch` (`-F`)
-
-  Use this option to fetch the upstream commits, before running the command.
-
-- `--force` (`-f`)
-
-  Use this option to force certain commands that fail in the general case.
-
-  NOTE: The `--force` option means different things for different commands.
-  Read the command specific doc for the exact meaning.
-
-- `--merge` (`-M`)
-
-  Use a `merge` strategy to include upstream subrepo commits on a pull (or
-  setup for push).
-
-- `--message=<message>` (`-m <message>`)
-
-  Specify your own commit message on the command line.
-
-- `--rebase` (`-R`)
-
-  Use a `rebase` strategy to include upstream subrepo commits on a pull (or
-  setup for push).
-
-- `--remote=<remote-url>` (`-r <remote-url>`)
-
-  Use a different remote-url than the one saved in `.gitrepo` locally.
-
-- `--squash` (`-s`)
-
-  Squash all commits on a push into one new commit.
-
-- `--update` (`-u`)
-
-  If `--branch` or `--remote` are used, and the command updates the `.gitrepo`
-  file, include these values to the update.
-
-= Output Options
-
-- `--quiet` (`-q`)
-
-  Print as little info as possible. Applicable to most commands.
-
-- `--verbose` (`-v`)
-
-  Print more information about the command execution and results. Applicable
-  to most commands.
-
-- `--debug` (`-d`)
-
-  Show the actual git (and other) commands being executed under the hood.
-  Applicable to most commands.
-
-- `--DEBUG` (`-x`)
-
-  Use the Bash `set -x` option which prints every command before it is run.
-  VERY noisy, but extremely useful in deep debugging. Applicable to all
-  commands.
-
-= Environment Variables
-
-The `git-subrepo` command exports and honors some environment variables:
-
-- `GIT_SUBREPO_ROOT`
-
-  This is set by the `.rc` file, if you use that method to install / enable
-  `git-subrepo`. It contains the path of the `git-subrepo` repository.
-
-- `GIT_SUBREPO_RUNNING`
-
-  This variable is exported when `git-subrepo` is running. It is set to the pid
-  of the `git-subrepo` process that is running. Other processes, like git hooks
-  for instance, can use this information to adjust accordingly.
-
-- `GIT_SUBREPO_COMMAND`
-
-  This variable is exported when `git-subrepo` is running. It is set to the
-  name of the `git-subrepo` subcommand that is running.
-
-- `GIT_SUBREPO_PAGER`
-
-  Use this to specify the pager to use for long output commands. Defaults to
-  `$PAGER` or `less`.
-
-- `GIT_SUBREPO_QUIET`
-
-  Set this for quiet (`-q`) output.
-
-- `GIT_SUBREPO_VERBOSE`
-
-  Set this for verbose (`-v`) output.
-
-- `GIT_SUBREPO_DEBUG`
-
-  Set this for debugging (`-d`) output.
-
-= Installation Instructions
-
-There are currently 3 ways to install `git-subrepo`. For all of them you need
-to get the source code from GitHub:
-
-  git clone https://github.com/ingydotnet/git-subrepo /path/to/git-subrepo
-
-The first installation method is preferred: `source` the `.rc` file. Just add a
-line like this one to your shell startup script:
-
-  source /path/to/git-subrepo/.rc
-
-That will modify your `PATH` and `MANPATH`, and also enable command completion.
-
-The second method is to do these things by hand. This might afford you more
-control of your shell environment. Simply add the `lib` and `man` directories
-to your `PATH` and `MANPATH`:
-
-  export GIT_SUBREPO_ROOT="/path/to/git-subrepo"
-  export PATH="/path/to/git-subrepo/lib:$PATH"
-  export MANPATH="/path/to/git-subrepo/man:$MANPATH"
-
-See below for info on how to turn on Command Completion.
-
-The third method is a standard system install, which puts `git-subrepo` next to
-your other git commands:
-
-  make install        # Possibly with 'sudo'
-
-This method does not account for upgrading and command completion yet.
-
-== Windows
-
-This command is known to work in these Windows environments:
-
-* Git for Windows -- https://git-for-windows.github.io/
-* Babun -- http://babun.github.io/
-* Cygwin -- https://www.cygwin.com/
-
-Let us know if there are others that it works (or doesn't work) in.
-
-= Testing
-
-The `git-subrepo` repository comes with a extensive test suite. You can run it
-with:
-
-  make test
-
-or if you don't have `make` on your system:
-
-  prove -v test
-
-= Upgrading
-
-If you used the `.rc` or `PATH` method of installation, just run this to
-upgrade `git-subrepo`:
-
-  git subrepo upgrade
-
-Or (same thing):
-
-  cd /path/to/git-subrepo
-  git pull
-
-If you used `make install` method, then run this again (after `git pull`):
-
-  make install        # Possibly with 'sudo'
-
-= Command Completion
-
-The `git subrepo` command supports `<TAB>`-based command completion. If you
-don't use the `.rc` script (see Installation, above), you'll need to enable
-this manually to use it.
-
-== In Bash
-
-If your Bash setup does not already provide command completion for Git, you'll
-need to enable that first:
-
-  source <Git completion script>
-
-On your system, the Git completion script might be found at any of the
-following locations (or somewhere else that we don't know about):
-
-* `/etc/bash_completion.d/git`
-* `/usr/share/bash-completion/git`
-* `/usr/share/bash-completion/completions/git`
-* `/opt/local/share/bash-completion/completions/git`
-* `/usr/local/etc/bash_completion.d/git`
-* `~/.homebrew/etc/bash_completion.d/git`
-
-In case you can't find any of these, this repository contains a copy of the
-Git completion script:
-
-  source /path/to/git-subrepo/share/git-completion.bash
-
-Once Git completion is enabled (whether you needed to do that manually or
-not), you can turn on `git-subrepo` completion with a command like this:
-
-  source /path/to/git-subrepo/share/completion.bash
-
-== In zsh
-
-In the Z shell (zsh), you can manually enable `git-subrepo` completion by
-adding the following line to your `~/.zshrc`, *before* the `compinit` function
-is called:
-
-  fpath=('/path/to/git-subrepo/share/zsh-completion' $fpath)
-
-= Status
-
-The git-subrepo command has been in use for well over a year and seems to get
-the job done. Development is still ongoing but mostly just for fixing bugs.
-
-Trying subrepo out is simple and painless (this is not `git submodule`).
-Nothing is permanent (if you do not push to shared remotes). ie You can always
-play around and reset back to the beginning without pain.
-
-This command has a test suite (run `make test`), but surely has many bugs. If
-you have expertise with Git and subcommands, please review the code, and file
-issues on anything that seems wrong.
-
-If you want to chat about the `git-subrepo` command, join `#gitcommands` on
-`irc.freenode.net`.
-
-= Notes
-
-* Works on POSIX systems: Linux, BSD, OSX, etc.
-* Works on various Windows environments. See "Windows" section above.
-* The `git-subrepo` repo itself has 2 subrepos under the `ext/` subdirectory.
-* Written in (very modern) Bash, with full test suite. Take a look.
-* A `.gitrepo` file never is in the top level dir (next to a `.git/` dir).
-
-= Authors
-
-* Ingy döt Net <ingy@ingy.net>
-* Magnus Carlsson <grimmymail@gmail.com>
-
-= License and Copyright
-
-The MIT License (MIT)
-
-Copyright (c) 2013-2020 Ingy döt Net