apex-ruby 1.0.30 → 1.0.31

data/ext/apex_ext/apex_src/vendor/cmark-gfm/bench/statistics.py

@@ -1,595 +0,0 @@
-##  Module statistics.py
-##
-##  Copyright (c) 2013 Steven D'Aprano <steve+python@pearwood.info>.
-##
-##  Licensed under the Apache License, Version 2.0 (the "License");
-##  you may not use this file except in compliance with the License.
-##  You may obtain a copy of the License at
-##
-##  http://www.apache.org/licenses/LICENSE-2.0
-##
-##  Unless required by applicable law or agreed to in writing, software
-##  distributed under the License is distributed on an "AS IS" BASIS,
-##  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-##  See the License for the specific language governing permissions and
-##  limitations under the License.
-
-
-"""
-Basic statistics module.
-
-This module provides functions for calculating statistics of data, including
-averages, variance, and standard deviation.
-
-Calculating averages
---------------------
-
-==================  =============================================
-Function            Description
-==================  =============================================
-mean                Arithmetic mean (average) of data.
-median              Median (middle value) of data.
-median_low          Low median of data.
-median_high         High median of data.
-median_grouped      Median, or 50th percentile, of grouped data.
-mode                Mode (most common value) of data.
-==================  =============================================
-
-Calculate the arithmetic mean ("the average") of data:
-
->>> mean([-1.0, 2.5, 3.25, 5.75])
-2.625
-
-
-Calculate the standard median of discrete data:
-
->>> median([2, 3, 4, 5])
-3.5
-
-
-Calculate the median, or 50th percentile, of data grouped into class intervals
-centred on the data values provided. E.g. if your data points are rounded to
-the nearest whole number:
-
->>> median_grouped([2, 2, 3, 3, 3, 4])  #doctest: +ELLIPSIS
-2.8333333333...
-
-This should be interpreted in this way: you have two data points in the class
-interval 1.5-2.5, three data points in the class interval 2.5-3.5, and one in
-the class interval 3.5-4.5. The median of these data points is 2.8333...
-
-
-Calculating variability or spread
----------------------------------
-
-==================  =============================================
-Function            Description
-==================  =============================================
-pvariance           Population variance of data.
-variance            Sample variance of data.
-pstdev              Population standard deviation of data.
-stdev               Sample standard deviation of data.
-==================  =============================================
-
-Calculate the standard deviation of sample data:
-
->>> stdev([2.5, 3.25, 5.5, 11.25, 11.75])  #doctest: +ELLIPSIS
-4.38961843444...
-
-If you have previously calculated the mean, you can pass it as the optional
-second argument to the four "spread" functions to avoid recalculating it:
-
->>> data = [1, 2, 2, 4, 4, 4, 5, 6]
->>> mu = mean(data)
->>> pvariance(data, mu)
-2.5
-
-
-Exceptions
-----------
-
-A single exception is defined: StatisticsError is a subclass of ValueError.
-
-"""
-
-__all__ = [ 'StatisticsError',
-            'pstdev', 'pvariance', 'stdev', 'variance',
-            'median',  'median_low', 'median_high', 'median_grouped',
-            'mean', 'mode',
-          ]
-
-
-import collections
-import math
-
-from fractions import Fraction
-from decimal import Decimal
-
-
-# === Exceptions ===
-
-class StatisticsError(ValueError):
-    pass
-
-
-# === Private utilities ===
-
-def _sum(data, start=0):
-    """_sum(data [, start]) -> value
-
-    Return a high-precision sum of the given numeric data. If optional
-    argument ``start`` is given, it is added to the total. If ``data`` is
-    empty, ``start`` (defaulting to 0) is returned.
-
-
-    Examples
-    --------
-
-    >>> _sum([3, 2.25, 4.5, -0.5, 1.0], 0.75)
-    11.0
-
-    Some sources of round-off error will be avoided:
-
-    >>> _sum([1e50, 1, -1e50] * 1000)  # Built-in sum returns zero.
-    1000.0
-
-    Fractions and Decimals are also supported:
-
-    >>> from fractions import Fraction as F
-    >>> _sum([F(2, 3), F(7, 5), F(1, 4), F(5, 6)])
-    Fraction(63, 20)
-
-    >>> from decimal import Decimal as D
-    >>> data = [D("0.1375"), D("0.2108"), D("0.3061"), D("0.0419")]
-    >>> _sum(data)
-    Decimal('0.6963')
-
-    Mixed types are currently treated as an error, except that int is
-    allowed.
-    """
-    # We fail as soon as we reach a value that is not an int or the type of
-    # the first value which is not an int. E.g. _sum([int, int, float, int])
-    # is okay, but sum([int, int, float, Fraction]) is not.
-    allowed_types = set([int, type(start)])
-    n, d = _exact_ratio(start)
-    partials = {d: n}  # map {denominator: sum of numerators}
-    # Micro-optimizations.
-    exact_ratio = _exact_ratio
-    partials_get = partials.get
-    # Add numerators for each denominator.
-    for x in data:
-        _check_type(type(x), allowed_types)
-        n, d = exact_ratio(x)
-        partials[d] = partials_get(d, 0) + n
-    # Find the expected result type. If allowed_types has only one item, it
-    # will be int; if it has two, use the one which isn't int.
-    assert len(allowed_types) in (1, 2)
-    if len(allowed_types) == 1:
-        assert allowed_types.pop() is int
-        T = int
-    else:
-        T = (allowed_types - set([int])).pop()
-    if None in partials:
-        assert issubclass(T, (float, Decimal))
-        assert not math.isfinite(partials[None])
-        return T(partials[None])
-    total = Fraction()
-    for d, n in sorted(partials.items()):
-        total += Fraction(n, d)
-    if issubclass(T, int):
-        assert total.denominator == 1
-        return T(total.numerator)
-    if issubclass(T, Decimal):
-        return T(total.numerator)/total.denominator
-    return T(total)
-
-
-def _check_type(T, allowed):
-    if T not in allowed:
-        if len(allowed) == 1:
-            allowed.add(T)
-        else:
-            types = ', '.join([t.__name__ for t in allowed] + [T.__name__])
-            raise TypeError("unsupported mixed types: %s" % types)
-
-
-def _exact_ratio(x):
-    """Convert Real number x exactly to (numerator, denominator) pair.
-
-    >>> _exact_ratio(0.25)
-    (1, 4)
-
-    x is expected to be an int, Fraction, Decimal or float.
-    """
-    try:
-        try:
-            # int, Fraction
-            return (x.numerator, x.denominator)
-        except AttributeError:
-            # float
-            try:
-                return x.as_integer_ratio()
-            except AttributeError:
-                # Decimal
-                try:
-                    return _decimal_to_ratio(x)
-                except AttributeError:
-                    msg = "can't convert type '{}' to numerator/denominator"
-                    raise TypeError(msg.format(type(x).__name__)) from None
-    except (OverflowError, ValueError):
-        # INF or NAN
-        if __debug__:
-            # Decimal signalling NANs cannot be converted to float :-(
-            if isinstance(x, Decimal):
-                assert not x.is_finite()
-            else:
-                assert not math.isfinite(x)
-        return (x, None)
-
-
-# FIXME This is faster than Fraction.from_decimal, but still too slow.
-def _decimal_to_ratio(d):
-    """Convert Decimal d to exact integer ratio (numerator, denominator).
-
-    >>> from decimal import Decimal
-    >>> _decimal_to_ratio(Decimal("2.6"))
-    (26, 10)
-
-    """
-    sign, digits, exp = d.as_tuple()
-    if exp in ('F', 'n', 'N'):  # INF, NAN, sNAN
-        assert not d.is_finite()
-        raise ValueError
-    num = 0
-    for digit in digits:
-        num = num*10 + digit
-    if exp < 0:
-        den = 10**-exp
-    else:
-        num *= 10**exp
-        den = 1
-    if sign:
-        num = -num
-    return (num, den)
-
-
-def _counts(data):
-    # Generate a table of sorted (value, frequency) pairs.
-    table = collections.Counter(iter(data)).most_common()
-    if not table:
-        return table
-    # Extract the values with the highest frequency.
-    maxfreq = table[0][1]
-    for i in range(1, len(table)):
-        if table[i][1] != maxfreq:
-            table = table[:i]
-            break
-    return table
-
-
-# === Measures of central tendency (averages) ===
-
-def mean(data):
-    """Return the sample arithmetic mean of data.
-
-    >>> mean([1, 2, 3, 4, 4])
-    2.8
-
-    >>> from fractions import Fraction as F
-    >>> mean([F(3, 7), F(1, 21), F(5, 3), F(1, 3)])
-    Fraction(13, 21)
-
-    >>> from decimal import Decimal as D
-    >>> mean([D("0.5"), D("0.75"), D("0.625"), D("0.375")])
-    Decimal('0.5625')
-
-    If ``data`` is empty, StatisticsError will be raised.
-    """
-    if iter(data) is data:
-        data = list(data)
-    n = len(data)
-    if n < 1:
-        raise StatisticsError('mean requires at least one data point')
-    return _sum(data)/n
-
-
-# FIXME: investigate ways to calculate medians without sorting? Quickselect?
-def median(data):
-    """Return the median (middle value) of numeric data.
-
-    When the number of data points is odd, return the middle data point.
-    When the number of data points is even, the median is interpolated by
-    taking the average of the two middle values:
-
-    >>> median([1, 3, 5])
-    3
-    >>> median([1, 3, 5, 7])
-    4.0
-
-    """
-    data = sorted(data)
-    n = len(data)
-    if n == 0:
-        raise StatisticsError("no median for empty data")
-    if n%2 == 1:
-        return data[n//2]
-    else:
-        i = n//2
-        return (data[i - 1] + data[i])/2
-
-
-def median_low(data):
-    """Return the low median of numeric data.
-
-    When the number of data points is odd, the middle value is returned.
-    When it is even, the smaller of the two middle values is returned.
-
-    >>> median_low([1, 3, 5])
-    3
-    >>> median_low([1, 3, 5, 7])
-    3
-
-    """
-    data = sorted(data)
-    n = len(data)
-    if n == 0:
-        raise StatisticsError("no median for empty data")
-    if n%2 == 1:
-        return data[n//2]
-    else:
-        return data[n//2 - 1]
-
-
-def median_high(data):
-    """Return the high median of data.
-
-    When the number of data points is odd, the middle value is returned.
-    When it is even, the larger of the two middle values is returned.
-
-    >>> median_high([1, 3, 5])
-    3
-    >>> median_high([1, 3, 5, 7])
-    5
-
-    """
-    data = sorted(data)
-    n = len(data)
-    if n == 0:
-        raise StatisticsError("no median for empty data")
-    return data[n//2]
-
-
-def median_grouped(data, interval=1):
-    """"Return the 50th percentile (median) of grouped continuous data.
-
-    >>> median_grouped([1, 2, 2, 3, 4, 4, 4, 4, 4, 5])
-    3.7
-    >>> median_grouped([52, 52, 53, 54])
-    52.5
-
-    This calculates the median as the 50th percentile, and should be
-    used when your data is continuous and grouped. In the above example,
-    the values 1, 2, 3, etc. actually represent the midpoint of classes
-    0.5-1.5, 1.5-2.5, 2.5-3.5, etc. The middle value falls somewhere in
-    class 3.5-4.5, and interpolation is used to estimate it.
-
-    Optional argument ``interval`` represents the class interval, and
-    defaults to 1. Changing the class interval naturally will change the
-    interpolated 50th percentile value:
-
-    >>> median_grouped([1, 3, 3, 5, 7], interval=1)
-    3.25
-    >>> median_grouped([1, 3, 3, 5, 7], interval=2)
-    3.5
-
-    This function does not check whether the data points are at least
-    ``interval`` apart.
-    """
-    data = sorted(data)
-    n = len(data)
-    if n == 0:
-        raise StatisticsError("no median for empty data")
-    elif n == 1:
-        return data[0]
-    # Find the value at the midpoint. Remember this corresponds to the
-    # centre of the class interval.
-    x = data[n//2]
-    for obj in (x, interval):
-        if isinstance(obj, (str, bytes)):
-            raise TypeError('expected number but got %r' % obj)
-    try:
-        L = x - interval/2  # The lower limit of the median interval.
-    except TypeError:
-        # Mixed type. For now we just coerce to float.
-        L = float(x) - float(interval)/2
-    cf = data.index(x)  # Number of values below the median interval.
-    # FIXME The following line could be more efficient for big lists.
-    f = data.count(x)  # Number of data points in the median interval.
-    return L + interval*(n/2 - cf)/f
-
-
-def mode(data):
-    """Return the most common data point from discrete or nominal data.
-
-    ``mode`` assumes discrete data, and returns a single value. This is the
-    standard treatment of the mode as commonly taught in schools:
-
-    >>> mode([1, 1, 2, 3, 3, 3, 3, 4])
-    3
-
-    This also works with nominal (non-numeric) data:
-
-    >>> mode(["red", "blue", "blue", "red", "green", "red", "red"])
-    'red'
-
-    If there is not exactly one most common value, ``mode`` will raise
-    StatisticsError.
-    """
-    # Generate a table of sorted (value, frequency) pairs.
-    table = _counts(data)
-    if len(table) == 1:
-        return table[0][0]
-    elif table:
-        raise StatisticsError(
-                'no unique mode; found %d equally common values' % len(table)
-                )
-    else:
-        raise StatisticsError('no mode for empty data')
-
-
-# === Measures of spread ===
-
-# See http://mathworld.wolfram.com/Variance.html
-#     http://mathworld.wolfram.com/SampleVariance.html
-#     http://en.wikipedia.org/wiki/Algorithms_for_calculating_variance
-#
-# Under no circumstances use the so-called "computational formula for
-# variance", as that is only suitable for hand calculations with a small
-# amount of low-precision data. It has terrible numeric properties.
-#
-# See a comparison of three computational methods here:
-# http://www.johndcook.com/blog/2008/09/26/comparing-three-methods-of-computing-standard-deviation/
-
-def _ss(data, c=None):
-    """Return sum of square deviations of sequence data.
-
-    If ``c`` is None, the mean is calculated in one pass, and the deviations
-    from the mean are calculated in a second pass. Otherwise, deviations are
-    calculated from ``c`` as given. Use the second case with care, as it can
-    lead to garbage results.
-    """
-    if c is None:
-        c = mean(data)
-    ss = _sum((x-c)**2 for x in data)
-    # The following sum should mathematically equal zero, but due to rounding
-    # error may not.
-    ss -= _sum((x-c) for x in data)**2/len(data)
-    assert not ss < 0, 'negative sum of square deviations: %f' % ss
-    return ss
-
-
-def variance(data, xbar=None):
-    """Return the sample variance of data.
-
-    data should be an iterable of Real-valued numbers, with at least two
-    values. The optional argument xbar, if given, should be the mean of
-    the data. If it is missing or None, the mean is automatically calculated.
-
-    Use this function when your data is a sample from a population. To
-    calculate the variance from the entire population, see ``pvariance``.
-
-    Examples:
-
-    >>> data = [2.75, 1.75, 1.25, 0.25, 0.5, 1.25, 3.5]
-    >>> variance(data)
-    1.3720238095238095
-
-    If you have already calculated the mean of your data, you can pass it as
-    the optional second argument ``xbar`` to avoid recalculating it:
-
-    >>> m = mean(data)
-    >>> variance(data, m)
-    1.3720238095238095
-
-    This function does not check that ``xbar`` is actually the mean of
-    ``data``. Giving arbitrary values for ``xbar`` may lead to invalid or
-    impossible results.
-
-    Decimals and Fractions are supported:
-
-    >>> from decimal import Decimal as D
-    >>> variance([D("27.5"), D("30.25"), D("30.25"), D("34.5"), D("41.75")])
-    Decimal('31.01875')
-
-    >>> from fractions import Fraction as F
-    >>> variance([F(1, 6), F(1, 2), F(5, 3)])
-    Fraction(67, 108)
-
-    """
-    if iter(data) is data:
-        data = list(data)
-    n = len(data)
-    if n < 2:
-        raise StatisticsError('variance requires at least two data points')
-    ss = _ss(data, xbar)
-    return ss/(n-1)
-
-
-def pvariance(data, mu=None):
-    """Return the population variance of ``data``.
-
-    data should be an iterable of Real-valued numbers, with at least one
-    value. The optional argument mu, if given, should be the mean of
-    the data. If it is missing or None, the mean is automatically calculated.
-
-    Use this function to calculate the variance from the entire population.
-    To estimate the variance from a sample, the ``variance`` function is
-    usually a better choice.
-
-    Examples:
-
-    >>> data = [0.0, 0.25, 0.25, 1.25, 1.5, 1.75, 2.75, 3.25]
-    >>> pvariance(data)
-    1.25
-
-    If you have already calculated the mean of the data, you can pass it as
-    the optional second argument to avoid recalculating it:
-
-    >>> mu = mean(data)
-    >>> pvariance(data, mu)
-    1.25
-
-    This function does not check that ``mu`` is actually the mean of ``data``.
-    Giving arbitrary values for ``mu`` may lead to invalid or impossible
-    results.
-
-    Decimals and Fractions are supported:
-
-    >>> from decimal import Decimal as D
-    >>> pvariance([D("27.5"), D("30.25"), D("30.25"), D("34.5"), D("41.75")])
-    Decimal('24.815')
-
-    >>> from fractions import Fraction as F
-    >>> pvariance([F(1, 4), F(5, 4), F(1, 2)])
-    Fraction(13, 72)
-
-    """
-    if iter(data) is data:
-        data = list(data)
-    n = len(data)
-    if n < 1:
-        raise StatisticsError('pvariance requires at least one data point')
-    ss = _ss(data, mu)
-    return ss/n
-
-
-def stdev(data, xbar=None):
-    """Return the square root of the sample variance.
-
-    See ``variance`` for arguments and other details.
-
-    >>> stdev([1.5, 2.5, 2.5, 2.75, 3.25, 4.75])
-    1.0810874155219827
-
-    """
-    var = variance(data, xbar)
-    try:
-        return var.sqrt()
-    except AttributeError:
-        return math.sqrt(var)
-
-
-def pstdev(data, mu=None):
-    """Return the square root of the population variance.
-
-    See ``pvariance`` for arguments and other details.
-
-    >>> pstdev([1.5, 2.5, 2.5, 2.75, 3.25, 4.75])
-    0.986893273527251
-
-    """
-    var = pvariance(data, mu)
-    try:
-        return var.sqrt()
-    except AttributeError:
-        return math.sqrt(var)

data/ext/apex_ext/apex_src/vendor/cmark-gfm/bench/stats.py

@@ -1,19 +0,0 @@
-#!/usr/bin/env python3
-
-import sys
-import statistics
-
-def pairs(l, n):
-        return zip(*[l[i::n] for i in range(n)])
-
-# data comes in pairs:
-#    n - time for running the program with no input
-#    m - time for running it with the benchmark input
-# we measure (m - n)
-
-values = [ float(y) - float(x) for (x,y) in pairs(sys.stdin.readlines(),2)]
-
-print("mean = %.4f, median = %.4f, stdev = %.4f" %
-    (statistics.mean(values), statistics.median(values),
-      statistics.stdev(values)))
-

data/ext/apex_ext/apex_src/vendor/cmark-gfm/benchmarks.md

@@ -1,33 +0,0 @@
-# Benchmarks
-
-Here are some benchmarks, run on an ancient Thinkpad running Intel
-Core 2 Duo at 2GHz.  The input text is a 11MB Markdown file built by
-concatenating the Markdown sources of all the localizations of the
-first edition of
-[*Pro Git*](https://github.com/progit/progit/tree/master/en) by Scott
-Chacon.
-
-|Implementation     |  Time (sec)|
-|-------------------|-----------:|
-| Markdown.pl       | 2921.24    |
-| Python markdown   |  291.25    |
-| PHP markdown      |   20.82    |
-| kramdown          |   17.32    |
-| cheapskate        |    8.24    |
-| peg-markdown      |    5.45    |
-| parsedown         |    5.06    |
-| **commonmark.js** |    2.09    |
-| marked            |    1.99    |
-| discount          |    1.85    |
-| **cmark**         |    0.29    |
-| hoedown           |    0.21    |
-
-To run these benchmarks, use `make bench PROG=/path/to/program`.
-
-`time` is used to measure execution speed.  The reported
-time is the *difference* between the time to run the program
-with the benchmark input and the time to run it with no input.
-(This procedure ensures that implementations in dynamic languages are
-not penalized by startup time.) A median of ten runs is taken.  The
-process is reniced to a high priority so that the system doesn't
-interrupt runs.