adlint 1.18.6 → 2.0.0

data/features/{message_detection → code_check}/W1066.feature

@@ -5,7 +5,7 @@ Feature: W1066
 
   Scenario: explicit conversion from `float' to `double' when the source value
             is derived from `+', `-', `*' or `/' expressions
-    Given a target source named "W1066.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(float a, float b)
       {
@@ -16,7 +16,7 @@ Feature: W1066
           c = (double) (a / b); /* W1066 */
       }
       """
-    When I successfully run `adlint W1066.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |
@@ -35,7 +35,7 @@ Feature: W1066
 
   Scenario: explicit conversion from `float' to `double' when the source value
             is not derived from `+', `-', `*' or `/' expressions
-    Given a target source named "W1066.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(float a, float b)
       {
@@ -46,7 +46,7 @@ Feature: W1066
           c = (double) (a ^ b); /* OK */
       }
       """
-    When I successfully run `adlint W1066.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |
@@ -61,7 +61,7 @@ Feature: W1066
       | W0628 | 1    | 13     |
 
   Scenario: implicit conversion from `float' to `double'
-    Given a target source named "W1066.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(float a, float b)
       {
@@ -72,7 +72,7 @@ Feature: W1066
           c = a / b; /* W0777 */
       }
       """
-    When I successfully run `adlint W1066.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |

data/features/{message_detection → code_check}/W1067.feature

@@ -5,7 +5,7 @@ Feature: W1067
 
   Scenario: explicit conversion from `float' to `double' when the source value
             is derived from `+', `-', `*' or `/' expressions
-    Given a target source named "W1067.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(float a, float b)
       {
@@ -16,7 +16,7 @@ Feature: W1067
           c = (long double) (a / b); /* W1067 */
       }
       """
-    When I successfully run `adlint W1067.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |
@@ -35,7 +35,7 @@ Feature: W1067
 
   Scenario: explicit conversion from `float' to `double' when the source value
             is not derived from `+', `-', `*' or `/' expressions
-    Given a target source named "W1067.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(float a, float b)
       {
@@ -46,7 +46,7 @@ Feature: W1067
           c = (long double) (a ^ b); /* OK */
       }
       """
-    When I successfully run `adlint W1067.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |
@@ -61,7 +61,7 @@ Feature: W1067
       | W0628 | 1    | 13     |
 
   Scenario: implicit conversion from `float' to `long double'
-    Given a target source named "W1067.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(float a, float b)
       {
@@ -72,7 +72,7 @@ Feature: W1067
           c = a / b; /* W0778 */
       }
       """
-    When I successfully run `adlint W1067.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |

data/features/{message_detection → code_check}/W1068.feature

@@ -5,7 +5,7 @@ Feature: W1068
 
   Scenario: explicit conversion from `double' to `long double' when the source
             value is derived from `+', `-', `*' or `/' expressions
-    Given a target source named "W1068.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(double a, double b)
       {
@@ -16,7 +16,7 @@ Feature: W1068
           c = (long double) (a / b); /* W1068 */
       }
       """
-    When I successfully run `adlint W1068.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |
@@ -35,7 +35,7 @@ Feature: W1068
 
   Scenario: explicit conversion from `double' to `long double' when the source
             value is not derived from `+', `-', `*' or `/' expressions
-    Given a target source named "W1068.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(double a, double b)
       {
@@ -46,7 +46,7 @@ Feature: W1068
           c = (long double) (a ^ b); /* OK */
       }
       """
-    When I successfully run `adlint W1068.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |
@@ -61,7 +61,7 @@ Feature: W1068
       | W0628 | 1    | 13     |
 
   Scenario: implicit conversion from `double' to `long double'
-    Given a target source named "W1068.c" with:
+    Given a target source named "fixture.c" with:
       """
       static void func(double a, double b)
       {
@@ -72,7 +72,7 @@ Feature: W1068
           c = a / b; /* W0779 */
       }
       """
-    When I successfully run `adlint W1068.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 13     |

data/features/{message_detection → code_check}/W1069.feature

@@ -4,7 +4,7 @@ Feature: W1069
   statements chain.
 
   Scenario: no trailing `else' in `if-else-if' statements chain
-    Given a target source named "W1069.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(int i)
       {
@@ -17,7 +17,7 @@ Feature: W1069
           return 2;
       }
       """
-    When I successfully run `adlint W1069.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -28,7 +28,7 @@ Feature: W1069
       | W0628 | 1    | 12     |
 
   Scenario: no trailing `else' in `if-else-if-else-if' statements chain
-    Given a target source named "W1069.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(int i)
       {
@@ -44,7 +44,7 @@ Feature: W1069
           return 4;
       }
       """
-    When I successfully run `adlint W1069.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -55,7 +55,7 @@ Feature: W1069
       | W0628 | 1    | 12     |
 
   Scenario: `else' clause at the last of `if-else-if-else-if' statements chain
-    Given a target source named "W1069.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(int i)
       {
@@ -73,7 +73,7 @@ Feature: W1069
           }
       }
       """
-    When I successfully run `adlint W1069.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -83,7 +83,7 @@ Feature: W1069
       | W0628 | 1    | 12     |
 
   Scenario: standalone `if' statement
-    Given a target source named "W1069.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(int i)
       {
@@ -93,7 +93,7 @@ Feature: W1069
           return 10;
       }
       """
-    When I successfully run `adlint W1069.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -103,7 +103,7 @@ Feature: W1069
       | W0628 | 1    | 12     |
 
   Scenario: `else' clause at the last of `if-else-if' statements chain
-    Given a target source named "W1069.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(int i)
       {
@@ -118,7 +118,7 @@ Feature: W1069
           }
       }
       """
-    When I successfully run `adlint W1069.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |

data/features/{message_detection → code_check}/W1070.feature

@@ -4,7 +4,7 @@ Feature: W1070
   statement because there are only two execution paths.
 
   Scenario: `switch' statement which has only two execution paths
-    Given a target source named "W1070.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(const int i)
       {
@@ -16,7 +16,7 @@ Feature: W1070
           }
       }
       """
-    When I successfully run `adlint W1070.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -27,7 +27,7 @@ Feature: W1070
 
   Scenario: `switch' statement which has only two execution paths and doesn't
             have `default' clause
-    Given a target source named "W1070.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(const int i)
       {
@@ -40,7 +40,7 @@ Feature: W1070
           return 10;
       }
       """
-    When I successfully run `adlint W1070.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -52,12 +52,12 @@ Feature: W1070
 
   Scenario: `switch' statement which has only two execution paths and the
             control never reaches to one of that paths
-    Given a target source named "W1070.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(const int i)
       {
           if (i > 5) {
-              switch (i) { /* W1070, W0781 */
+              switch (i) { /* W1070 */
               case 5:
                   return 2;
               default:
@@ -67,7 +67,7 @@ Feature: W1070
           return 10;
       }
       """
-    When I successfully run `adlint W1070.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -80,17 +80,17 @@ Feature: W1070
       | W0628 | 1    | 12     |
 
   Scenario: `switch' statement which has only one execution path
-    Given a target source named "W1070.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(const int i)
       {
-          switch (i) { /* W0781 */
+          switch (i) { /* OK */
           default:
               return 8;
           }
       }
       """
-    When I successfully run `adlint W1070.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -100,12 +100,12 @@ Feature: W1070
 
   Scenario: `switch' statement which has three execution paths, but the control
             never reaches to only one of that paths
-    Given a target source named "W1070.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(const int i)
       {
           if (i > 5) {
-              switch (i) { /* W0781 */
+              switch (i) { /* OK */
               case 0:
                   return 1;
               case 5:
@@ -117,7 +117,7 @@ Feature: W1070
           return 10;
       }
       """
-    When I successfully run `adlint W1070.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |
@@ -131,7 +131,7 @@ Feature: W1070
       | W0628 | 1    | 12     |
 
   Scenario: `switch' statement which has three execution paths
-    Given a target source named "W1070.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(const int i)
       {
@@ -145,7 +145,7 @@ Feature: W1070
           }
       }
       """
-    When I successfully run `adlint W1070.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |

data/features/{message_detection → code_check}/W1071.feature

@@ -3,7 +3,7 @@ Feature: W1071
   W1071 detects that a function has multiple termination points.
 
   Scenario: explicit returns and implicit return
-    Given a target source named "W1071.c" with:
+    Given a target source named "fixture.c" with:
       """
       void foo(int i) /* W1071 */
       {
@@ -12,7 +12,7 @@ Feature: W1071
           }
       }
       """
-    When I successfully run `adlint W1071.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W0117 | 1    | 6      |
@@ -21,7 +21,7 @@ Feature: W1071
       | W0628 | 1    | 6      |
 
   Scenario: explicit return and no implicit return
-    Given a target source named "W1071.c" with:
+    Given a target source named "fixture.c" with:
       """
       void foo(int i) /* OK */
       {
@@ -31,7 +31,7 @@ Feature: W1071
           }
       }
       """
-    When I successfully run `adlint W1071.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W0117 | 1    | 6      |
@@ -40,7 +40,7 @@ Feature: W1071
       | W0628 | 1    | 6      |
 
   Scenario: dead explicit return and implicit return
-    Given a target source named "W1071.c" with:
+    Given a target source named "fixture.c" with:
       """
       void foo(unsigned int ui) /* OK */
       {
@@ -49,7 +49,7 @@ Feature: W1071
           }
       }
       """
-    When I successfully run `adlint W1071.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W0117 | 1    | 6      |
@@ -60,7 +60,7 @@ Feature: W1071
       | W0628 | 1    | 6      |
 
   Scenario: explicit returns and no implicit return
-    Given a target source named "W1071.c" with:
+    Given a target source named "fixture.c" with:
       """
       int foo(int i) /* W1071 */
       {
@@ -72,7 +72,7 @@ Feature: W1071
           }
       }
       """
-    When I successfully run `adlint W1071.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W0117 | 1    | 5      |

data/features/{message_detection → code_check}/W1072.feature

@@ -3,7 +3,7 @@ Feature: W1072
   W1072 detects that a `goto' statement is found.
 
   Scenario: `goto' statement is found
-    Given a target source named "W1072.c" with:
+    Given a target source named "fixture.c" with:
       """
       static int func(int i)
       {
@@ -21,7 +21,7 @@ Feature: W1072
           return i;
       }
       """
-    When I successfully run `adlint W1072.c` on noarch
+    When I successfully run `adlint fixture.c` on noarch
     Then the output should exactly match with:
       | mesg  | line | column |
       | W1076 | 1    | 12     |