activity_notification 2.4.1 → 2.5.0

data/spec/rails_app/bin/setup

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-require 'pathname'
-
-# path to your application root.
-APP_ROOT = Pathname.new File.expand_path('../../',  __FILE__)
-
-Dir.chdir APP_ROOT do
-  # This script is a starting point to setup your application.
-  # Add necessary setup steps to this file:
-
-  puts "== Installing dependencies =="
-  system "gem install bundler --conservative"
-  system "bundle check || bundle install"
-
-  # puts "\n== Copying sample files =="
-  # unless File.exist?("config/database.yml")
-  #   system "cp config/database.yml.sample config/database.yml"
-  # end
-
-  puts "\n== Preparing database =="
-  system "bin/rake db:setup"
-
-  puts "\n== Removing old logs and tempfiles =="
-  system "rm -f log/*"
-  system "rm -rf tmp/cache"
-
-  puts "\n== Restarting application server =="
-  system "touch tmp/restart.txt"
-end

data/spec/rails_app/bin/webpack

@@ -1,18 +0,0 @@
-#!/usr/bin/env ruby
-
-ENV["RAILS_ENV"] ||= ENV["RACK_ENV"] || "development"
-ENV["NODE_ENV"]  ||= "development"
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-require "bundler/setup"
-
-require "webpacker"
-require "webpacker/webpack_runner"
-
-APP_ROOT = File.expand_path("..", __dir__)
-Dir.chdir(APP_ROOT) do
-  Webpacker::WebpackRunner.run(ARGV)
-end

data/spec/rails_app/bin/webpack-dev-server

@@ -1,18 +0,0 @@
-#!/usr/bin/env ruby
-
-ENV["RAILS_ENV"] ||= ENV["RACK_ENV"] || "development"
-ENV["NODE_ENV"]  ||= "development"
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-require "bundler/setup"
-
-require "webpacker"
-require "webpacker/dev_server_runner"
-
-APP_ROOT = File.expand_path("..", __dir__)
-Dir.chdir(APP_ROOT) do
-  Webpacker::DevServerRunner.run(ARGV)
-end

data/spec/rails_app/config/application.rb

@@ -1,54 +0,0 @@
-require File.expand_path('../boot', __FILE__)
-
-# Load mongoid configuration if necessary:
-if ENV['AN_ORM'] == 'mongoid'
-  require 'mongoid'
-  require 'rails'
-  unless Rails.env.test?
-    Mongoid.load!(File.expand_path("config/mongoid.yml"), :development)
-  end
-# Load dynamoid configuration if necessary:
-elsif ENV['AN_ORM'] == 'dynamoid'
-  require 'dynamoid'
-  require 'rails'
-  require File.expand_path('../dynamoid', __FILE__)
-end
-
-# Pick the frameworks you want:
-if ENV['AN_ORM'] == 'mongoid' && ENV['AN_TEST_DB'] == 'mongodb'
-  require "mongoid/railtie"
-else
-  require "active_record/railtie"
-end
-require "action_controller/railtie"
-require "action_mailer/railtie"
-require "action_view/railtie"
-require "sprockets/railtie"
-require 'action_cable/engine'
-
-Bundler.require(*Rails.groups)
-require "activity_notification"
-
-module Dummy
-  class Application < Rails::Application
-    if Gem::Version.new("5.2.0") <= Rails.gem_version && Rails.gem_version < Gem::Version.new("6.0.0") && ENV['AN_TEST_DB'] != 'mongodb'
-      config.active_record.sqlite3.represent_boolean_as_integer = true
-    end
-    config.active_support.to_time_preserves_timezone = :zone
-
-    # Configure CORS for API mode
-    if defined?(Rack::Cors)
-      config.middleware.insert_before 0, Rack::Cors do
-        allow do
-          origins '*'
-          resource '*',
-            headers: :any,
-            expose: ['access-token', 'client', 'uid'],
-            methods: [:get, :post, :put, :delete]
-        end
-      end
-    end
-  end
-end
-
-puts "ActivityNotification test parameters: AN_ORM=#{ENV['AN_ORM'] || 'active_record(default)'} AN_TEST_DB=#{ENV['AN_TEST_DB'] || 'sqlite(default)'}"

data/spec/rails_app/config/boot.rb

@@ -1,5 +0,0 @@
-# Set up gems listed in the Gemfile.
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
-
-require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
-$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/spec/rails_app/config/cable.yml

@@ -1,8 +0,0 @@
-production:
-  adapter: async
-
-development:
-  adapter: async
-
-test:
-  adapter: test

data/spec/rails_app/config/database.yml

@@ -1,36 +0,0 @@
-sqlite: &sqlite
-  adapter: sqlite3
-  database: <%= Rails.env.test? ? '":memory:"' : "db/#{Rails.env}.sqlite3" %>
-
-mysql: &mysql
-  adapter: mysql2
-  database: activity_notification_<%= Rails.env %>
-  username: root
-  password:
-  encoding: utf8
-
-postgresql: &postgresql
-  adapter: postgresql
-  database: activity_notification_<%= Rails.env %>
-  username: postgres
-  password:
-  min_messages: ERROR
-
-mongodb: &mongodb
-  adapter: sqlite3
-  database: <%= Rails.env.test? ? '":memory:"' : "db/#{Rails.env}.sqlite3" %>
-
-default: &default
-  pool: 5
-  timeout: 5000
-  host: 127.0.0.1
-  <<: *<%= ENV['AN_TEST_DB'].blank? ? "sqlite" : ENV['AN_TEST_DB'] %>
-
-development:
-  <<: *default
-
-test:
-  <<: *default
-
-production:
-  <<: *default

data/spec/rails_app/config/dynamoid.rb

@@ -1,13 +0,0 @@
-Dynamoid.configure do |config|
-  config.namespace = ENV['AN_NO_DYNAMODB_NAMESPACE'] ? "" : "activity_notification_#{Rails.env}"
-  # TODO Update Dynamoid v3.4.0+
-  # config.capacity_mode = :on_demand
-  config.read_capacity = 5
-  config.write_capacity = 5
-  unless Rails.env.production?
-    config.endpoint = 'http://localhost:8000'
-  end
-  unless Rails.env.test?
-    config.store_datetime_as_string = true
-  end
-end

data/spec/rails_app/config/environment.rb

@@ -1,26 +0,0 @@
-# Load the Rails application.
-require File.expand_path('../application', __FILE__)
-
-# Demo application uses Devise and Devise Token Auth
-require 'devise'
-require 'devise_token_auth'
-
-# Initialize the Rails application.
-Rails.application.initialize!
-
-def silent_stdout(&block)
-  original_stdout = $stdout
-  $stdout = fake = StringIO.new
-  begin
-    yield
-  ensure
-    $stdout = original_stdout
-  end
-end
-
-# Load database schema
-if Rails.env.test? && ['mongodb', 'dynamodb'].exclude?(ENV['AN_TEST_DB'])
-  silent_stdout do
-    load "#{Rails.root}/db/schema.rb"
-  end
-end

data/spec/rails_app/config/environments/development.rb

@@ -1,60 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  unless ENV['AN_ORM'] == 'mongoid' && ENV['AN_TEST_DB'] == 'mongodb'
-    config.active_record.migration_error = :page_load
-  end
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
-  # yet still be able to expire them through the digest params.
-  config.assets.digest = true
-
-  # Adds additional error checking when serving assets at runtime.
-  # Checks for improperly declared sprockets dependencies.
-  # Raises helpful error messages.
-  config.assets.raise_runtime_errors = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-
-  # For devise and notification email
-  config.action_mailer.default_url_options = { host: 'localhost', port: 3000 }
-
-  # For notification email preview
-  config.action_mailer.preview_path = "#{Rails.root}/lib/mailer_previews"
-
-  # Specifies delivery job for mail
-  if Rails::VERSION::MAJOR >= 6
-    config.action_mailer.delivery_job = "ActionMailer::MailDeliveryJob"
-  end
-
-  # Configration for bullet
-  config.after_initialize do
-    Bullet.enable = true
-    Bullet.alert = true
-  end
-end

data/spec/rails_app/config/environments/production.rb

@@ -1,85 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like
-  # NGINX, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-  # Compress JavaScripts and CSS.
-  # config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
-  # yet still be able to expire them through the digest params.
-  config.assets.digest = true
-
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Specifies delivery job for mail
-  config.action_mailer.delivery_job = "ActionMailer::MailDeliveryJob"
-  
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
-
-  # Allow Action Cable connection from any host
-  config.action_cable.disable_request_forgery_protection = true
-end

data/spec/rails_app/config/environments/test.rb

@@ -1,53 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static file server for tests with Cache-Control for performance.
-  config.public_file_server.enabled = true
-  config.public_file_server.headers = {'Cache-Control' => 'public, max-age=3600'}
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Randomize the order test cases are executed.
-  config.active_support.test_order = :random
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-
-  # Use :test Active Job adapter for RSpec.
-  config.active_job.queue_adapter = :test
-
-  # Set default_url_options for devise and notification email.
-  config.action_mailer.default_url_options = { host: 'localhost', port: 3000 }
-
-  # Specifies delivery job for mail
-  if Rails::VERSION::MAJOR >= 6
-    config.action_mailer.delivery_job = "ActionMailer::MailDeliveryJob"
-  end
-end

data/spec/rails_app/config/initializers/activity_notification.rb

@@ -1,104 +0,0 @@
-ActivityNotification.configure do |config|
-
-  # Configure if all activity notifications are enabled
-  # Set false when you want to turn off activity notifications
-  config.enabled = true
-
-  # Configure ORM name for ActivityNotification.
-  # Set :active_record, :mongoid or :dynamoid.
-  ENV['AN_ORM'] = 'active_record' if ['mongoid', 'dynamoid'].exclude?(ENV['AN_ORM'])
-  config.orm = ENV['AN_ORM'].to_sym
-
-  # Configure table name to store notification data.
-  config.notification_table_name = ENV['AN_NOTIFICATION_TABLE_NAME'] || "notifications"
-
-  # Configure table name to store subscription data.
-  config.subscription_table_name = ENV['AN_SUBSCRIPTION_TABLE_NAME'] || "subscriptions"
-
-  # Configure if email notification is enabled as default.
-  # Note that you can configure them for each model by acts_as roles.
-  # Set true when you want to turn on email notifications as default.
-  config.email_enabled = false
-
-  # Configure if subscription is managed.
-  # Note that this parameter must be true when you want use subscription management.
-  # However, you can also configure them for each model by acts_as roles.
-  # Set true when you want to turn on subscription management as default.
-  config.subscription_enabled = false
-
-  # Configure default subscription value to use when the subscription record does not configured.
-  # Note that you can configure them for each method calling as default argument.
-  # Set false when you want to unsubscribe to any notifications as default.
-  config.subscribe_as_default = true
-
-  # Configure default email subscription value to use when the subscription record does not configured.
-  # Note that you can configure them for each method calling as default argument.
-  # Set false when you want to unsubscribe to email notifications as default.
-  # config.subscribe_to_email_as_default = true
-
-  # Configure default optional target subscription value to use when the subscription record does not configured.
-  # Note that you can configure them for each method calling as default argument.
-  # Set false when you want to unsubscribe to optinal target notifications as default.
-  # config.subscribe_to_optional_targets_as_default = true
-
-  # Configure the e-mail address which will be shown in ActivityNotification::Mailer,
-  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
-  config.mailer_sender = 'please-change-me-at-config-initializers-activity_notification@example.com'
-
-  # Configure the class responsible to send e-mails.
-  # config.mailer = "ActivityNotification::Mailer"
-
-  # Configure the parent class responsible to send e-mails.
-  # config.parent_mailer = 'ActionMailer::Base'
-
-  # Configure the parent job class for delayed notifications.
-  # config.parent_job = 'ActiveJob::Base'
-
-  # Configure the parent class for activity_notification controllers.
-  # config.parent_controller = 'ApplicationController'
-
-  # Configure the parent class for activity_notification channels.
-  # config.parent_channel = 'ActionCable::Channel::Base'
-
-  # Configure the custom mailer templates directory
-  # config.mailer_templates_dir = 'activity_notification/mailer'
-
-  # Configure default limit number of opened notifications you can get from opened* scope
-  config.opened_index_limit = 10
-
-  # Configure ActiveJob queue name for delayed notifications.
-  config.active_job_queue = :activity_notification
-
-  # Configure delimiter of composite key for DynamoDB.
-  # config.composite_key_delimiter = '#'
-
-  # Configure if activity_notification stores notificaion records including associated records like target and notifiable..
-  # This store_with_associated_records option can be set true only when you use mongoid or dynamoid ORM.
-  config.store_with_associated_records = (config.orm != :active_record)
-
-  # Configure if WebSocket subscription using ActionCable is enabled.
-  # Note that you can configure them for each model by acts_as roles.
-  # Set true when you want to turn on WebSocket subscription using ActionCable as default.
-  config.action_cable_enabled = false
-
-  # Configure if WebSocket API subscription using ActionCable is enabled.
-  # Note that you can configure them for each model by acts_as roles.
-  # Set true when you want to turn on WebSocket API subscription using ActionCable as default.
-  config.action_cable_api_enabled = false
-
-  # Configure if ctivity_notification publishes WebSocket notifications using ActionCable only to authenticated target with Devise.
-  # Note that you can configure them for each model by acts_as roles.
-  # Set true when you want to use Device integration with WebSocket subscription using ActionCable as default.
-  config.action_cable_with_devise = false
-
-  # Configure notification channel prefix for ActionCable.
-  config.notification_channel_prefix = 'activity_notification_channel'
-
-  # Configure notification API channel prefix for ActionCable.
-  config.notification_api_channel_prefix = 'activity_notification_api_channel'
-
-  # Configure if activity_notification internally rescues optional target errors. Default value is true.
-  # See https://github.com/simukappu/activity_notification/issues/155 for more details.
-  config.rescue_optional_target_errors = true
-
-end

data/spec/rails_app/config/initializers/assets.rb

@@ -1,11 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
-
-# Add additional assets to the asset load path
-# Rails.application.config.assets.paths << Emoji.images_path
-
-# Precompile additional assets.
-# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-# Rails.application.config.assets.precompile += %w( search.js )

data/spec/rails_app/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/spec/rails_app/config/initializers/cookies_serializer.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/rails_app/config/initializers/copy_it.aws.rb.template

@@ -1,6 +0,0 @@
-# Copy this template file as aws.rb and set your credentials
-unless Rails.env.test?
-  Aws.config.update({
-    credentials: Aws::Credentials.new('your_access_key_id', 'your_secret_access_key')
-  })
-end