LilyPond-Ruby 0.0.2.1 → 0.1.2

data/share/lilypond/2.24.1/fonts/source/feta-noteheads.mf

@@ -0,0 +1,2642 @@
+% Feta (not the Font-En-Tja) music font -- implement noteheads
+% This file is part of LilyPond, the GNU music typesetter.
+%
+% Copyright (C) 1997--2022 Jan Nieuwenhuizen <janneke@gnu.org>
+% & Han-Wen Nienhuys <hanwen@xs4all.nl>
+% & Juergen Reuter <reuter@ipd.uka.de>
+%
+% The LilyPond font is free software: you can redistribute it and/or modify
+% it under the terms of the GNU General Public License as published by
+% the Free Software Foundation, either version 3 of the License, or
+% (at your option) any later version, or under the SIL Open Font License.
+%
+% LilyPond is distributed in the hope that it will be useful,
+% but WITHOUT ANY WARRANTY; without even the implied warranty of
+% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+% GNU General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with LilyPond.  If not, see <http://www.gnu.org/licenses/>.
+
+test_outlines := 0;
+
+
+% Most beautiful noteheads are pronounced, not circular,
+% and not even symmetric.
+% These examples are inspired by [Wanske]; see literature list.
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% NOTE HEAD VARIABLES
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+save half_notehead_width, whole_notehead_width;
+save solfa_noteheight;
+
+numeric whole_notehead_width;
+numeric half_notehead_width;
+
+fet_begingroup ("noteheads");
+
+
+%
+% solfa heads should not overlap on chords.
+%
+solfa_noteheight# := staff_space# - stafflinethickness#;
+
+% OFFSET is needed for breves and longae only.
+def undraw_inside_ellipse (expr ellipticity, tilt, superness, clearance,
+                                offset) =
+  begingroup
+    save pat;
+    path pat;
+
+    pat := superellipse ((ellipticity, 0), (0, 1.0),
+                         (-ellipticity, 0), (0, -1.0),
+                         superness);
+    pat := pat rotated tilt;
+
+    save top_point, right_point;
+    pair top_point, right_point;
+
+    top_point := directionpoint left of pat;
+    right_point := directionpoint up of pat;
+
+    save height, scaling;
+
+    height# = staff_space# + stafflinethickness# - clearance;
+    scaling# = height# / (2 ypart (top_point));
+    define_pixels (scaling);
+    pat := pat scaled scaling shifted (w / 2 + offset, .5 (h - d));
+
+    if test_outlines = 1:
+      draw pat;
+    else:
+      unfill pat;
+    fi
+  endgroup;
+enddef;
+
+
+def draw_longa (expr up) =
+  save stemthick, fudge;
+
+  stemthick# = 2 stafflinethickness#;
+  define_whole_blacker_pixels (stemthick);
+
+  % Longae of smaller design sizes should have their lines farther
+  % apart (i.e., the overlap with the notehead ellipsoid should be
+  % smaller).
+  fudge# = blot_diameter# * min (max (-0.15,
+                                      0.9 - (20 / (design_size + 4))),
+                                 0.3);
+  define_whole_pixels (fudge);
+
+  % `draw_outside_ellipse` also sets `width#` and `width`.
+  draw_outside_ellipse (1.80, 0, 0.707, 0, -fudge);
+  undraw_inside_ellipse (1.30, 125, 0.68, 2 stafflinethickness#, -fudge);
+
+  pickup pencircle scaled stemthick;
+
+  % Longae of smaller design sizes should have their lines longer.
+  line_length := min (max (0.7, 64/60 - (design_size / 60)), 0.85);
+
+  % Line lengths between 0.72 and 0.77 are not nice because they are
+  % neither separate nor connected when there is an interval of a
+  % fourth.
+  if line_length < 0.75:
+    quanted_line_length := min (0.72, line_length);
+  else:
+    quanted_line_length := max (0.77, line_length);
+  fi;
+
+  final_line_length := quanted_line_length * staff_space;
+
+  save boxtop, boxbot;
+  define_pixels (boxtop, boxbot);
+
+  if up:
+    bot y1 = -final_line_length;
+    top y2 = final_line_length;
+    rt x1 = 0;
+    x1 = x2;
+
+    lft x3 = width - 2 fudge;
+    x4 = x3;
+    top y4 = h + 3.0 staff_space;
+    y3 = y1;
+    boxtop# := staff_space# * (quanted_line_length + 3.0) - stemthick#;
+    boxbot# := staff_space# * quanted_line_length;
+  else:
+    bot y1 = -d - 3.0 staff_space;
+    top y2 = final_line_length;
+    rt x1 = 0;
+    x1 = x2;
+
+    lft x3 = width - 2 fudge;
+    x4 = x3;
+    y4 = y2;
+    bot y3 = -final_line_length;
+    boxtop# := staff_space# * quanted_line_length;
+    boxbot# := staff_space# * (quanted_line_length + 3.0) - stemthick#;
+  fi;
+
+  draw_gridline (z1, z2, stemthick);
+  draw_gridline (z3, z4, stemthick);
+
+  set_char_box (stemthick#,
+                width# + stemthick# - 2 fudge#,
+                boxbot#,
+                boxtop#);
+
+  labels (1, 2, 3, 4);
+enddef;
+
+
+fet_beginchar ("longa notehead (up)", "uM2");
+  draw_longa (true);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("longa notehead (down)", "dM2");
+  draw_longa (false);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+def draw_brevis (expr linecount, line_thickness_multiplier) =
+  save stemthick, fudge, gap;
+
+  stemthick# = line_thickness_multiplier * 2 * stafflinethickness#;
+  define_whole_blacker_pixels (stemthick);
+
+  % Double-lined breves of smaller design sizes should have a bigger
+  % gap between the lines.
+  gap# := (0.95 - 0.008 * design_size) * stemthick#;
+  define_pixels (gap);
+
+  % Breves of smaller design sizes should have their lines farther
+  % apart (i.e., the overlap with the notehead ellipsoid should be
+  % smaller).
+  fudge# = blot_diameter# * min (max (-0.15,
+                                      0.8 - (20 / (design_size + 4))
+                                      + .1 linecount),
+                                 0.3);
+  define_whole_pixels (fudge);
+
+  % `draw_outside_ellipse` also sets `width#` and `width`.
+  draw_outside_ellipse (1.80, 0, 0.707, 0, -fudge);
+  undraw_inside_ellipse (1.30, 125, 0.68, 2 stafflinethickness#, -fudge);
+
+  pickup pencircle scaled stemthick;
+
+  % Breves of smaller design sizes should have their lines longer.
+  line_length := min (max (0.7, 64/60 - (design_size / 60)), 0.85);
+
+  % Line lengths between 0.72 and 0.77 are not nice because they are
+  % neither separate nor connected when there is an interval of a
+  % fourth.
+  if line_length < 0.75:
+    quanted_line_length := min (0.72, line_length);
+  else:
+    quanted_line_length := max (0.77, line_length);
+  fi;
+
+  % If breves are aligned for intervals like a second, they overlap so
+  % that the vertical stems fall together.  To ensure this, the
+  % 'breapth' value should be the thickness of the left vertical
+  % stem(s).
+  set_char_box (stemthick# * linecount + gap# * (linecount - 1),
+                width# + stemthick# * linecount
+                  + gap# * (linecount - 1) - 2 fudge#,
+                staff_space# * quanted_line_length,
+                staff_space# * quanted_line_length);
+
+  bot y1 = -quanted_line_length * staff_space;
+  top y2 = quanted_line_length * staff_space;
+  rt x1 = 0;
+  x1 = x2;
+
+  lft x3 = width - 2 fudge;
+  x4 = x3;
+  y4 = y2;
+  y3 = y1;
+
+  for i := 0 step 1 until linecount - 1:
+    line_distance := i * (gap + stemthick);
+    draw_gridline (z1 - (line_distance, 0),
+                   z2 - (line_distance, 0),
+                   stemthick);
+    draw_gridline (z3 + (line_distance, 0),
+                   z4 + (line_distance, 0),
+                   stemthick);
+  endfor;
+enddef;
+
+
+fet_beginchar ("brevis notehead", "sM1");
+  draw_brevis (1, 1);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("double-lined brevis notehead", "sM1double");
+  draw_brevis (2, 0.8);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("whole notehead", "s0");
+  draw_outside_ellipse (1.80 - puff_up_factor / 3.0, 0, 0.707, 0, 0);
+  undraw_inside_ellipse (1.30, 125 - puff_up_factor * 10,
+                         0.68, 2 stafflinethickness#, 0);
+
+  whole_notehead_width# := charwd;
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("half notehead", "s1");
+  draw_outside_ellipse (1.53 - puff_up_factor / 3.0, 34, 0.66, 0.17, 0);
+  undraw_inside_ellipse (3.25, 33, 0.81, 2.5 stafflinethickness#, 0);
+
+  half_notehead_width# := charwd;
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("quarter notehead", "s2");
+  draw_quarter_path;
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+fet_beginchar ("whole diamondhead", "s0diamond");
+  draw_outside_ellipse (1.80, 0, 0.495, 0, 0);
+  undraw_inside_ellipse (1.30, 125, 0.6,
+                         .4 staff_space# + stafflinethickness#, 0);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("half diamondhead", "s1diamond");
+  draw_outside_ellipse (1.50, 34, 0.49, 0.17, 0);
+  undraw_inside_ellipse (3.5, 33, 0.80,
+                         .3 staff_space# + 1.5 stafflinethickness#, 0);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("quarter diamondhead", "s2diamond");
+  draw_outside_ellipse (1.80, 35, 0.495, -0.25, 0);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+vardef penposx@# (expr d) =
+  begingroup;
+    save pat;
+    path pat;
+
+    pat = top z@#
+          .. lft z@#
+          .. bot z@#
+          .. rt z@#
+          .. cycle;
+    z@#l = pat intersectionpoint (z@# -- infinity * dir (d + 180));
+    z@#r = pat intersectionpoint (z@# -- infinity * dir (d));
+  endgroup
+enddef;
+
+
+%
+% UGH: xs not declared as argument.
+%
+def define_triangle_shape =
+  save triangle_a, triangle_b, triangle_c;
+  save triangle_out_a, triangle_out_b, triangle_out_c;
+  save triangle_in, triangle_out;
+  save width, depth, height;
+  save origin, left_up_dir;
+  save exact_left_point, exact_right_point, exact_down_point;
+
+  path triangle_a, triangle_b, triangle_c;
+  path triangle_out_a, triangle_out_b, triangle_out_c;
+  path triangle_in, triangle_out;
+  pair origin, left_up_dir;
+  pair exact_down_point, exact_left_point, exact_right_point;
+
+  save pen_thick;
+  pen_thick# = stafflinethickness# + .1 staff_space#;
+  define_pixels (llap);
+  define_blacker_pixels (pen_thick);
+
+  left_up_dir = llap# * dir (90 + tilt);
+
+  xpart (left_up_dir) * xs - (pen_thick# * xs) / 2 + xpart origin = 0;
+  ypart origin = 0;
+
+  exact_left_point := origin + (left_up_dir xscaled xs);
+  exact_down_point := origin + (left_up_dir rotated 120 xscaled xs);
+  exact_right_point := origin + (left_up_dir rotated 240 xscaled xs);
+
+  height# = ypart (exact_left_point + origin) + pen_thick# / 2;
+  depth# = -ypart (exact_down_point + origin) + pen_thick# / 2;
+  width# = xpart (exact_right_point - exact_left_point)
+           + pen_thick# * xs;
+
+  set_char_box (0, width#, depth#, height#);
+
+  % Formerly, the shape has simply been drawn with an elliptical pen
+  % (`scaled pen_thick xscaled xs'), but the envelope of such a curve
+  % is of 6th degree.  For the sake of mf2pt1, we approximate it.
+
+  pickup pencircle scaled pen_thick xscaled xs;
+
+  z0 = (hround_pixels (xpart origin), 0);
+
+  z1 = z1' = z0 + llap * dir (90 + tilt) xscaled xs;
+  z2 = z2' = z0 + llap * dir (90 + tilt + 120) xscaled xs;
+  z3 = z3' = z0 + llap * dir (90 + tilt + 240) xscaled xs;
+
+  z12 = caveness [.5[z1, z2], z3];
+  z23 = caveness [.5[z2, z3], z1];
+  z31 = caveness [.5[z3, z1], z2];
+
+  triangle_a = z1 .. z12 .. z2;
+  triangle_b = z2 .. z23 .. z3;
+  triangle_c = z3 .. z31 .. z1;
+
+  penposx1 (angle (direction 0 of triangle_a) - 90);
+  penposx2 (angle (direction 0 of triangle_b) - 90);
+  penposx3 (angle (direction 0 of triangle_c) - 90);
+
+  penposx1' (angle (direction infinity of triangle_c) + 90);
+  penposx2' (angle (direction infinity of triangle_a) + 90);
+  penposx3' (angle (direction infinity of triangle_b) + 90);
+
+  penposx12 (angle (z12 - z0));
+  penposx23 (angle (z23 - z0));
+  penposx31 (angle (z31 - z0));
+
+  z10 = (z0 -- z1) intersectionpoint (z1l .. z12l .. z2'r);
+  z20 = (z0 -- z2) intersectionpoint (z2l .. z23l .. z3'r);
+  z30 = (z0 -- z3) intersectionpoint (z3l .. z31l .. z1'r);
+
+  triangle_in = z10
+                .. z12l
+                .. z20
+                & z20
+                .. z23l
+                .. z30
+                & z30
+                .. z31l
+                .. z10
+                & cycle;
+
+  triangle_out_a = z1r .. z12r .. z2'l;
+  triangle_out_b = z2r .. z23r .. z3'l;
+  triangle_out_c = z3r .. z31r .. z1'l;
+
+  triangle_out = top z1
+                 .. lft z1
+                 .. z1r{direction 0 of triangle_out_a}
+                 & triangle_out_a
+                 & {direction infinity of triangle_out_a}z2'l
+                 .. lft z2
+                 .. bot z2
+                 .. z2r{direction 0 of triangle_out_b}
+                 & triangle_out_b
+                 & {direction infinity of triangle_out_b}z3'l
+                 .. rt z3
+                 .. top z3
+                 .. z3r{direction 0 of triangle_out_c}
+                 & triangle_out_c
+                 & {direction infinity of triangle_out_c}z1'l
+                 .. cycle;
+
+  labels (0, 10, 20, 30);
+  penlabels (1, 1', 2, 2', 3, 3', 12, 23, 31);
+
+  % attachment Y
+  charwy := ypart exact_right_point;
+  charwx := xpart exact_right_point + .5 pen_thick# * xs;
+  chardwy := ypart exact_down_point;
+  chardwx := xpart exact_down_point - .5 pen_thick# * xs;
+enddef;
+
+
+def draw_whole_triangle_head =
+  save hei, xs;
+  save llap;
+  save tilt;
+
+  tilt = 40;
+  llap# = 3/4 noteheight#;
+
+  xs = 1.5;
+  caveness := 0.1;
+  define_triangle_shape;
+  fill triangle_out;
+  unfill triangle_in;
+enddef;
+
+
+fet_beginchar ("whole trianglehead", "s0triangle");
+  draw_whole_triangle_head;
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+def draw_small_triangle_head =
+  save hei, xs;
+  save llap;
+  save tilt;
+
+  tilt = 40;
+  llap# = 2/3 noteheight#;
+  xs = 1.2;
+  caveness := 0.1;
+  define_triangle_shape;
+
+  pickup feta_fillpen;
+
+  filldraw triangle_out;
+  unfilldraw triangle_in;
+enddef;
+
+
+fet_beginchar ("half trianglehead", "s1triangle");
+  draw_small_triangle_head;
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+def draw_closed_triangle_head =
+  save hei, xs;
+  save llap;
+  save tilt;
+
+  tilt = 40;
+  llap# = 2/3 noteheight#;
+  xs = 1.0;
+  caveness := 0.1;
+  define_triangle_shape;
+  fill triangle_out;
+enddef;
+
+
+fet_beginchar ("quarter trianglehead", "s2triangle");
+  draw_closed_triangle_head;
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% Slash heads are for indicating improvisation.  They are
+% twice as high as normal heads.
+%
+def draw_slash (expr hwid_hash) =
+  save exact_height;
+  save ne, nw_dist;
+  pair ne, nw_dist;
+  exact_height = staff_space# + stafflinethickness# / 2;
+
+  set_char_box (0, 2 exact_height / slash_slope + hwid_hash,
+                exact_height, exact_height);
+
+  charwx := charwd;
+  charwy := charht;
+
+  clearxy;
+
+  d := d - feta_shift;
+
+  pickup pencircle scaled blot_diameter;
+
+  bot y1 = -d;
+  top y2 = h;
+  lft x1 = 0;
+  lft x2 = 2 h / slash_slope;
+
+  rt x3 = w;
+  y3 = y2;
+  y4 = y1;
+  x3 - x2 = x4 - x1;
+
+  ne = unitvector (z3 - z4);
+  nw_dist = (ne rotated 90) * 0.5 blot_diameter;
+
+  fill bot z1{left}
+       .. (z1 + nw_dist){ne}
+       -- (z2 + nw_dist){ne}
+       .. top z2{right}
+       -- top z3{right}
+       .. (z3 - nw_dist){-ne}
+       -- (z4 - nw_dist){-ne}
+       .. bot z4{left}
+       -- cycle;
+
+  if hwid_hash > 2 slash_thick#:
+    save th;
+
+    th = slash_thick - blot_diameter;
+    y6 = y7;
+    y5 = y8;
+    y3 - y7 = th;
+    y5 - y1 = th;
+    z6 - z5 = whatever * ne;
+    z8 - z7 = whatever * ne;
+
+    z5 = z1 + whatever * ne + th * (ne rotated -90);
+    z8 = z4 + whatever * ne + th * (ne rotated 90);
+
+    unfill z5
+           -- z6
+           -- z7
+           -- z8
+           -- cycle;
+  fi
+  labels (range 1 thru 10);
+enddef;
+
+
+fet_beginchar ("whole slashhead", "s0slash");
+  draw_slash (4 slash_thick# + 0.5 staff_space#);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("half slashhead", "s1slash");
+  draw_slash (3.0 slash_thick# + 0.15 staff_space#);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("quarter slashhead", "s2slash");
+  draw_slash (1.5 slash_thick#);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% `thick' is the distance between the NE/SW parallel lines in the cross
+% (distance between centres of lines) in multiples of stafflinethickness
+%
+def draw_cross (expr thick) =
+  save ne, nw;
+  save ne_dist, nw_dist, rt_dist, up_dist;
+  save crz_in, crz_out;
+  save thickness;
+  pair ne, nw;
+  pair ne_dist, nw_dist, rt_dist, up_dist;
+  path crz_in, crz_out;
+
+  pen_thick# := 1.2 stafflinethickness#;
+  thickness# := thick * stafflinethickness#;
+  define_pixels (thickness);
+  define_blacker_pixels (pen_thick);
+
+  pickup pencircle scaled pen_thick;
+
+  h := h - feta_shift;
+
+  top y3 = h;
+  ne = unitvector ((1, (2 h - pen_thick) / (w - pen_thick)));
+  rt x4 = w / 2;
+  y5 = 0;
+  z4 - z5 = whatever * ne;
+  x6 = 0;
+  z6 - z3 = whatever * ne;
+  z3 - z4 = whatever * (ne yscaled -1);
+
+  z4 - z3 = whatever * (ne) + (ne rotated -90) * thickness;
+
+
+  x1 = charwd / 2 - .5 pen_thick#;
+  z1 = whatever * ne
+       + thick / 2 * stafflinethickness# * (ne rotated -90);
+
+  % labels (1, 2, 3, 4, 5, 6);
+
+  nw = unitvector (z3 - z4);
+
+  up_dist = up * 0.5 pen_thick / cosd (angle (ne));
+  rt_dist = right * 0.5 pen_thick / sind (angle (ne));
+  nw_dist = (ne rotated 90) * 0.5 pen_thick;
+  ne_dist = (nw rotated -90) * 0.5 pen_thick;
+
+  x4' := x4;
+  x5' := x5;
+  y6' := y6;
+
+  x4 := hround (x4' + .5 pen_thick) - .5 pen_thick;
+  x5 := hfloor (x5' + xpart rt_dist) - xpart rt_dist;
+  y6 := vfloor (y6' + ypart up_dist) - ypart up_dist;
+
+  crz_out = (z6 + up_dist)
+            -- (z3 + nw_dist){ne}
+            .. (top z3)
+            .. (z3 + ne_dist){-nw}
+            -- (z4 + ne_dist){-nw}
+            .. (rt z4)
+            .. (z4 - nw_dist){-ne}
+            -- (z5 + rt_dist);
+  crz_out := crz_out shifted (0, feta_shift)
+             -- reverse crz_out yscaled -1 shifted (0, -feta_eps);
+  fill crz_out
+       -- reverse crz_out xscaled -1 shifted (-feta_eps, 0)
+       -- cycle;
+
+  if (thick > 1):
+    x4 := hround (x4' - xpart rt_dist) + xpart rt_dist;
+    x5 := hceiling (x5' - .5 pen_thick) + .5 pen_thick;
+    y6 := vfloor (y6' - .5 pen_thick) + .5 pen_thick;
+
+    crz_in = (bot z6){right}
+             .. (z6 - nw_dist){ne}
+             -- (z3 - up_dist)
+             -- (z4 - rt_dist)
+             -- (z5 + nw_dist){-ne}
+             .. {down}(lft z5);
+    crz_in := crz_in shifted (0, feta_shift)
+              -- reverse crz_in yscaled -1 shifted (0, -feta_eps);
+    unfill crz_in
+           -- reverse crz_in xscaled -1 shifted (-feta_eps, 0)
+           -- cycle;
+  fi
+
+  % ugh
+  currentpicture := currentpicture shifted (hround (w / 2), 0);
+
+  charwx := charwd;
+  charwy := y1 + feta_shift;
+
+  z12 = (charwx * hppp, y1 * vppp);
+
+  labels (12);
+enddef;
+
+
+fet_beginchar ("whole crossed notehead", "s0cross");
+  save wid, hei;
+
+  wid# := black_notehead_width# + 4 stafflinethickness#;
+  hei# := noteheight# + stafflinethickness#;
+
+  set_char_box (0, wid#, hei# / 2, hei# / 2);
+
+  draw_cross (3.75);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("half crossed notehead", "s1cross");
+  save wid, hei;
+
+  wid# := black_notehead_width# + 2 stafflinethickness#;
+  hei# := noteheight# + stafflinethickness# / 2;
+
+  set_char_box (0, wid#, hei# / 2, hei# / 2);
+
+  draw_cross (3.0);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("crossed notehead", "s2cross");
+  wid# := black_notehead_width#;
+  hei# := noteheight#;
+  set_char_box (0, wid#, hei# / 2, hei# / 2);
+
+  draw_cross (1.0);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+fet_beginchar ("x-circled notehead", "s2xcircle");
+  save wid, hei;
+  save cthick, cxd, cyd, dy;
+
+  wid# := black_notehead_width# * sqrt (sqrt2);
+  hei# := noteheight# * sqrt (sqrt2);
+
+  set_char_box (0, wid#, hei# / 2, hei# / 2);
+
+  d := d - feta_space_shift;
+
+  cthick# := (1.2 + 1/4) * stafflinethickness#;
+  define_blacker_pixels (cthick);
+
+  cxd := w - cthick;
+  cyd := h + d - cthick / 2;
+
+  dy = .5 (h - d);
+
+  pickup pencircle scaled cthick;
+
+  fill fullcircle xscaled (cxd + cthick)
+                  yscaled (cyd + cthick)
+                  shifted (w / 2, dy);
+  unfill fullcircle xscaled (cxd - cthick)
+                    yscaled (cyd - cthick)
+                    shifted (w / 2, dy);
+
+  xpos := .5 cxd / sqrt2;
+  ypos := .5 cyd / sqrt2;
+
+  pickup penrazor scaled cthick rotated (angle (xpos, ypos) + 90);
+  draw (-xpos + w / 2, -ypos + dy)
+       -- (xpos + w / 2, ypos + dy);
+
+  pickup penrazor scaled cthick rotated (angle (xpos, -ypos) + 90);
+  draw (-xpos + w / 2, ypos + dy)
+       -- (xpos + w / 2, -ypos + dy);
+
+  charwx := charwd;
+  charwy := 0;
+
+  z12 = (charwx * hppp, charwy * vppp);
+  labels (12);
+
+  draw_staff_if_debugging (-2, 2);
+fet_endchar;
+
+
+%%%%%%%%
+%
+% SOLFA SHAPED NOTES
+%
+%
+% Note: For whole and half notes, the `fill' curve (p_out) is offset from
+%       the points that specify the outer geometry, because we need to add
+%       the rounding.  In contrast, the inner curve is not offset, because
+%       there is no rounding.
+%
+%       This means that to get a line of thick_factor * pen_thickness,
+%       we need to offset the inner curve by
+%
+%         (thick_factor - 0.5) * pen_thickness
+%
+%       or by
+%
+%         (2 * thick_factor - 1) * half_pen_thickness
+%
+save solfa_pen_thick;
+solfa_pen_thick# = 1.3 stafflinethickness#;
+define_blacker_pixels (solfa_pen_thick);
+
+save solfa_pen_radius;
+solfa_pen_radius = 0.5 solfa_pen_thick;
+
+save solfa_base_notewidth;
+solfa_base_notewidth# := black_notehead_width#;
+
+solfa_whole_width := 1.0;
+solfa_half_width := 1.0;
+solfa_quarter_width := 1.0;
+
+
+%%% Do head
+%
+% Triangle with base parallel to staff lines.
+%
+
+def draw_do_head (expr width_factor, thickness_factor) =
+  save p_in, p_out;
+  save left_dist, right_dist, bottom_dist;
+  path p_in, p_out;
+  pair left_dist, right_dist, bottom_dist;
+
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  bottom_thick_factor := 2 * thickness_factor - 1;
+  % no different thickness for left side if we want uniform thickness
+  if thickness_factor = 1:
+    left_thick_factor := 1;
+  else:
+    left_thick_factor := 0.7 * bottom_thick_factor;
+  fi
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius,
+                     (h + d) / (3 * (1 + bottom_thick_factor)));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  bot y1 = -d;
+  y1 = y2;
+  lft x1 = 0;
+  rt x2 = w;
+  top y3 = h;
+  x3 = .5 [x1, x2];
+
+  left_dist = (unitvector (z3 - z1) rotated 90) * pen_radius;
+  right_dist = (unitvector (z2 - z3) rotated 90) * pen_radius;
+  bottom_dist = (0,1) * pen_radius;
+
+  save pa, pb, pc;
+  path pa, pb, pc;
+  save point_a, point_b, point_c;
+  pair point_a, point_b, point_c;
+
+  pa := (z1 - left_thick_factor * left_dist)
+        -- (z3 - left_thick_factor * left_dist);
+  pb := (z1 + bottom_thick_factor * bottom_dist)
+        -- (z2 + bottom_thick_factor * bottom_dist);
+  pc := (z2 - right_dist)
+        -- (z3 - right_dist);
+
+  point_a := pa intersectionpoint pb;
+  point_b := pb intersectionpoint pc;
+  point_c := pc intersectionpoint pa;
+
+  p_in := point_a
+          -- point_b
+          -- point_c
+          -- cycle;
+
+  p_out := bot z1
+           -- bot z2{right}
+           .. rt z2{up}
+           .. (z2 + right_dist){z3 - z2}
+           -- (z3 + right_dist){z3 - z2}
+           .. top z3{left}
+           .. (z3 + left_dist){z1 - z3}
+           -- (z1 + left_dist){z1 - z3}
+           .. lft z1{down}
+           .. {right}cycle;
+
+  labels (1, 2, 3);
+
+  charwx := charwd;
+  charwy := -chardp + 0.5 stafflinethickness#;
+  chardwy := charwy;
+enddef;
+
+save do_weight;
+do_weight := 2;
+
+
+fet_beginchar ("whole dohead", "s0do");
+  draw_do_head (solfa_whole_width, do_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half dohead", "s1do");
+  draw_do_head (solfa_half_width, do_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter dohead", "s2do");
+  draw_do_head (solfa_quarter_width, do_weight);
+  fill p_out;
+fet_endchar;
+
+
+fet_beginchar ("whole thin dohead", "s0doThin");
+  draw_do_head (solfa_whole_width, 1);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half thin dohead", "s1doThin");
+  draw_do_head (solfa_half_width, 1);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter thin dohead", "s2doThin");
+  draw_do_head (solfa_quarter_width, 1);
+  fill p_out;
+fet_endchar;
+
+
+%
+% re - flat top, curved bottom:
+%
+%   (0,h/2) {dir -90}
+%   .. (w/2,-h/2)
+%   .. {dir 90} (w,h/2)
+%   -- cycle;
+%
+% (broader along the base and with more vertical sides for half and
+% whole notes)
+%
+% Note: According to some shape-note singers, there should be no size
+%       differences for half and whole notes, contrary to the comment above.
+%       Consequently, we have made them all the same width.
+%
+% stem attachment: h/2
+%
+def draw_re_head (expr width_factor, thickness_factor) =
+  save p_in, p_out;
+  path p_in, p_out;
+
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  save offset;
+  offset = (2 * thickness_factor - 1);
+
+  save curve_start;
+  curve_start = 0.7;
+
+  save pen_radius;
+
+  pen_radius := min (solfa_pen_radius,
+                     (h + d) * (1-curve_start) / (1+ offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  lft x1 = 0;
+  top y1 = h;
+  x2 = x1;
+  y2 = curve_start [y3, y1];
+  bot y3 = -d;
+  x3 = .5 [x2, x4];
+  rt x4 = w;
+  y4 = y2;
+  y5 = y1;
+  x5 = x4;
+
+  labels (range 1 thru 5);
+
+  p_in := (z1 + pen_radius * (1, -1 * offset))
+          -- rt z2{down}
+          .. ((top z3) + (0, offset * pen_radius))
+          .. lft z4{up}
+          -- (z5 + pen_radius * (-1, -1 * offset))
+          -- cycle;
+
+  p_out := lft z1
+           -- lft z2{down}
+           .. bot z3
+           .. rt z4{up}
+           -- rt z5{up}
+           .. top z5{left}
+           -- top z1{left}
+           .. {down}cycle;
+
+  charwx := charwd;
+  charwy := curve_start [-chardp, charht];
+  chardwy := charwy
+enddef;
+
+
+save re_weight;
+re_weight := 2;
+
+fet_beginchar ("whole rehead", "s0re");
+  draw_re_head (solfa_whole_width, re_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half rehead", "s1re");
+  draw_re_head (solfa_half_width, re_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter rehead", "s2re");
+  draw_re_head (solfa_quarter_width, re_weight);
+  fill p_out;
+fet_endchar;
+
+
+fet_beginchar ("whole thin rehead", "s0reThin");
+  draw_re_head (solfa_whole_width, 1);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half thin rehead", "s1reThin");
+  draw_re_head (solfa_half_width, 1);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter thin rehead", "s2reThin");
+  draw_re_head (solfa_quarter_width, 1);
+  fill p_out;
+fet_endchar;
+
+
+%%%% mi head -- diamond shape
+%
+% two versions, depending on whether the `strong' lines are on the nw & se
+% or the ne & sw
+%
+def draw_mi_head (expr width_factor, thickness_factor, mirror) =
+  save path_out, path_in;
+  save ne_dist, se_dist, ne, se;
+  save path_a, path_b, path_c, path_d;
+  path path_out, path_in;
+  pair ne_dist, se_dist, ne, se;
+  path path_a, path_b, path_c, path_d;
+  save inner_path;
+  path inner_path;
+
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save note_diagonal;
+
+  note_diagonal := w / 2 ++ (h + d) / 2;
+
+  save pen_radius;
+
+  pen_radius := min (solfa_pen_radius,
+                     .3 * note_diagonal / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  lft x1 = 0;
+  y1 = 0;
+  bot y2 = -d;
+  x2 = .5 [x1, x3];
+  rt x3 = w;
+  x4 = x2;
+  y3 = y1;
+  top y4 = h;
+
+  % inner sides are parallel to outer sides
+  z6 - z5 = whatever * (z2 - z1);
+  z8 - z7 = whatever * (z4 - z3);
+  z8 - z5 = whatever * (z4 - z1);
+  z7 - z6 = whatever * (z3 - z2);
+
+  ne = unitvector (z4 - z1);
+  se = unitvector (z2 - z1);
+
+  ne_dist = (ne rotated 90) * pen_radius;
+  se_dist = (se rotated 90) * pen_radius;
+
+  path_a := (z1 + se_dist)
+            -- (z2 + se_dist);
+  path_b := (z2 + (ne_dist * offset))
+            -- (z3 + (ne_dist * offset));
+  path_c := (z3 - se_dist)
+            -- (z4 - se_dist);
+  path_d := (z4 - (ne_dist * offset))
+            -- (z1 - (ne_dist * offset));
+
+  z5 = path_a intersectionpoint path_d;
+  z7 = path_b intersectionpoint path_c;
+
+  labels (range 1 thru 8);
+
+  inner_path := z5
+                -- z6
+                -- z7
+                -- z8
+                -- cycle;
+
+  if mirror:
+    path_in := inner_path;
+  else:
+    path_in := inner_path reflectedabout (z2, z4);
+  fi
+
+  path_out := lft z1 {down}
+              .. (z1 - se_dist){se}
+              -- (z2 - se_dist){se}
+              .. bot z2 {right}
+              .. (z2 - ne_dist){ne}
+              -- (z3 - ne_dist){ne}
+              .. rt z3 {up}
+              .. (z3 + se_dist){-se}
+              -- (z4 + se_dist){-se}
+              .. top z4 {left}
+              .. (z4 + ne_dist){-ne}
+              -- (z1 + ne_dist){-ne}
+              .. cycle;
+enddef;
+
+
+save mi_weight;
+mi_weight := 2;
+
+fet_beginchar ("whole mihead", "s0mi");
+  draw_mi_head (solfa_whole_width, mi_weight, false);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("half mihead", "s1mi");
+  draw_mi_head (solfa_quarter_width, mi_weight, false);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter mihead", "s2mi");
+  draw_mi_head (solfa_quarter_width, mi_weight, false);
+  fill path_out;
+fet_endchar;
+
+
+fet_beginchar ("whole mirror mihead", "s0miMirror");
+  draw_mi_head (solfa_whole_width, mi_weight, true);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("half mirror mihead", "s1miMirror");
+  draw_mi_head (solfa_quarter_width, mi_weight, true);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter mirror mihead", "s2miMirror");
+  draw_mi_head (solfa_quarter_width, mi_weight, true);
+  fill path_out;
+fet_endchar;
+
+
+fet_beginchar ("whole thin mihead", "s0miThin");
+  draw_mi_head (solfa_whole_width, 1, false);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("half thin mihead", "s1miThin");
+  draw_mi_head (solfa_quarter_width, 1, false);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter thin mihead", "s2miThin");
+  draw_mi_head (solfa_quarter_width, 1, false);
+  fill path_out;
+fet_endchar;
+
+
+%%%% fa head
+%
+% Right triangle, hypotenuse from nw to se corner.  Stem attaches on
+% vertical side in direction of horizontal side.
+%
+def draw_fa_head (expr width_factor, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  save p_down_in, p_down_out, p_up_in, p_up_out, nw_dist, nw;
+  path p_down_in, p_down_out, p_up_in, p_up_out;
+  save path_a, path_b, path_c;
+  path path_a, path_b, path_c;
+  pair nw_dist, nw;
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius,
+                     .33 * (h + d) / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  lft x1 = 0;
+  top y1 = h;
+
+  rt x2 = w;
+  y2 = y1;
+  bot y3 = -d;
+  x3 = x2;
+
+  y4 = y3;
+  x4 = x1;
+
+  labels (1, 2, 3, 4);
+
+  nw = unitvector (z1 - z3);
+  nw_dist = (nw rotated 90) * pen_radius;
+
+  path_a := (z1 - (0,1) * offset * pen_radius)
+            -- (z2 - (0,1) * offset * pen_radius);
+  path_b := (z2 - (1,0) * pen_radius)
+            -- (z3 - (1,0) * pen_radius);
+  path_c := (z3 - nw_dist)
+            -- (z1 - nw_dist);
+
+  p_up_in := (path_a intersectionpoint path_b)
+             -- (path_b intersectionpoint path_c)
+             -- (path_c intersectionpoint path_a)
+             -- cycle;
+
+  p_up_out := lft z1{down}
+              .. (z1 + nw_dist){-nw}
+              -- (z3 + nw_dist){-nw}
+              .. bot z3{right}
+              .. rt z3{up}
+              -- rt z2{up}
+              .. top z2{left}
+              -- top z1{left}
+              .. cycle;
+
+  p_down_in := p_up_in rotated 180 shifted (w, 0);
+  p_down_out := p_up_out rotated 180 shifted (w, 0);
+
+  charwy := 0.0;
+  charwx := charwd;
+enddef;
+
+save fa_weight;
+fa_weight := 1.75;
+
+fet_beginchar ("whole fa up head", "u0fa");
+  draw_fa_head (solfa_whole_width, fa_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("whole fa down head", "d0fa");
+  draw_fa_head (solfa_whole_width, fa_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half fa up head", "u1fa");
+  draw_fa_head (solfa_half_width, fa_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half fa down head", "d1fa");
+  draw_fa_head (solfa_half_width, fa_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter fa up head", "u2fa");
+  draw_fa_head (solfa_quarter_width, fa_weight);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter fa down head", "d2fa");
+  draw_fa_head (solfa_quarter_width, fa_weight);
+  fill p_down_out;
+fet_endchar;
+
+
+fet_beginchar ("whole thin fa up head", "u0faThin");
+  draw_fa_head (solfa_whole_width, 1);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("whole thin fa down head", "d0faThin");
+  draw_fa_head (solfa_whole_width, 1);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half thin fa up head", "u1faThin");
+  draw_fa_head (solfa_half_width, 1);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half thin fa down head", "d1faThin");
+  draw_fa_head (solfa_half_width, 1);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter thin fa up head", "u2faThin");
+  draw_fa_head (solfa_quarter_width, 1);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter thin fa down head", "d2faThin");
+  draw_fa_head (solfa_quarter_width, 1);
+  fill p_down_out;
+fet_endchar;
+
+
+
+%%%% sol head
+%
+% Note: sol head is the same shape as a standard music head, and doesn't
+%       vary from style to style.  However, width is constant with duration,
+%       so we can't just use the standard note font.
+%
+def draw_sol_head (expr filled) =
+  draw_outside_ellipse (1.49 - puff_up_factor / 3.0, 31, 0.707, 0, 0);
+  if not filled:
+    undraw_inside_ellipse (2.5 - puff_up_factor / 3.0, 31, 0.707,
+                           3.5 stafflinethickness#, 0);
+  fi
+  draw_staff_if_debugging (-2, 2);
+enddef;
+
+fet_beginchar ("whole solhead", "s0sol");
+  draw_sol_head ( false);
+fet_endchar;
+
+
+fet_beginchar ("half solhead", "s1sol");
+  draw_sol_head ( false);
+fet_endchar;
+
+
+fet_beginchar ("quarter solhead", "s2sol");
+  draw_sol_head ( true);
+fet_endchar;
+
+
+%%%% la head
+%
+%   Rectangle head
+%
+def draw_la_head (expr width_factor, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+  save p_in, p_out;
+  path p_in, p_out;
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius,
+                     .35 * (h + d) / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  lft x1 = 0;
+  top y1 = h;
+
+  rt x2 = w;
+  y2 = y1;
+  bot y3 = -d;
+  x3 = x2;
+
+  y4 = y3;
+  x4 = x1;
+
+  labels (range 1 thru 4);
+
+  p_in := (z1 + pen_radius * (1, -offset))
+          -- (z2 + pen_radius * (-1, -offset))
+          -- (z3 + pen_radius * (-1, offset))
+          -- (z4 + pen_radius * (1, offset))
+          -- cycle;
+
+  p_out := top z1
+           -- top z2{right}
+           .. rt z2{down}
+           -- rt z3{down}
+           .. bot z3{left}
+           -- bot z4{left}
+           .. lft z4{up}
+           -- lft z1{up}
+           .. cycle;
+enddef;
+
+
+save la_weight;
+la_weight := 2;
+
+fet_beginchar ("whole lahead", "s0la");
+  draw_la_head (solfa_whole_width, la_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half lahead", "s1la");
+  draw_la_head (solfa_half_width, la_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter lahead", "s2la");
+  draw_la_head (solfa_quarter_width, la_weight);
+  fill p_out;
+fet_endchar;
+
+
+fet_beginchar ("whole thin lahead", "s0laThin");
+  draw_la_head (solfa_whole_width, 1);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half thin lahead", "s1laThin");
+  draw_la_head (solfa_half_width, 1);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter lahead", "s2laThin");
+  draw_la_head (solfa_quarter_width, 1);
+  fill p_out;
+fet_endchar;
+
+
+%%%% ti head
+%
+%   `Snow-cone', V with rounded top.
+%
+def draw_ti_head (expr width_factor, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+  save p_in, p_out, p_top, p_top_in;
+  path p_in, p_out, p_top, p_top_in;
+  save cone_height;
+  cone_height = 0.64;
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius,
+                     .4 * (h + d) / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  x1 = .5 [x2, x4];
+  bot y1 = -d;
+  lft x2 = 0;
+  y2 = cone_height [y1, y3];
+  rt x4 = w;
+  y4 = y2;
+  x3 = x1;
+  top y3 = h;
+  x5 = x1;
+  y5 = y1 + offset * pen_radius;
+
+  labels (range 1 thru 4);
+
+  save nw_dist, sw_dist, nw, sw;
+  pair nw_dist, sw_dist, nw, sw;
+
+  nw = unitvector (z2 - z1);
+  sw = unitvector (z1 - z4);
+
+  nw_dist = (nw rotated 90) * pen_radius;
+  sw_dist = (sw rotated 90) * pen_radius;
+
+  p_top := (z2 + nw * pen_radius)
+           .. (top z3){right}
+           .. (z4 - sw * pen_radius);
+
+  p_top_in := (z2 - nw * offset * pen_radius)
+              .. (z3 - (0,1) * pen_radius) {right}
+              .. (z4 + sw * offset * pen_radius);
+
+  save path_a, path_b;
+  path path_a, path_b;
+  path_a := z2
+            -- z5;
+  path_b := z5
+            -- z4;
+
+  z6 = path_a intersectionpoint p_top_in;
+  z7 = path_b intersectionpoint p_top_in;
+
+  p_in := z5
+          -- z6
+          .. bot z3
+          .. z7
+          -- cycle;
+
+  p_out := bot z1
+           .. (z1 + nw_dist)
+           -- (z2 + nw_dist)
+           .. lft z2
+           .. (z2 + nw * pen_radius){direction 0 of p_top}
+           & p_top
+           & {direction infinity of p_top}(z4 - sw * pen_radius)
+           .. rt z4
+           .. (z4 + sw_dist)
+           -- (z1 + sw_dist)
+           .. cycle;
+
+  charwx := charwd;
+  charwy := cone_height [-chardp, charht];
+  chardwy := charwy;
+enddef;
+
+
+save ti_weight;
+ti_weight := 2;
+
+fet_beginchar ("whole tihead", "s0ti");
+  draw_ti_head (solfa_whole_width, ti_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half tihead", "s1ti");
+  draw_ti_head (solfa_half_width, ti_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter tihead", "s2ti");
+  draw_ti_head (solfa_quarter_width, ti_weight);
+  fill p_out;
+fet_endchar;
+
+
+fet_beginchar ("whole thin tihead", "s0tiThin");
+  draw_ti_head (solfa_whole_width, 1);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half thin tihead", "s1tiThin");
+  draw_ti_head (solfa_half_width, 1);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter thin tihead", "s2tiThin");
+  draw_ti_head (solfa_quarter_width, 1);
+  fill p_out;
+fet_endchar;
+
+
+%%%%%%   Funk shape note heads
+%
+%  Funk heads are narrower than Aiken and Sacred Harp, so we need a new
+%  width.
+%
+funk_notehead_width := 0.75;
+
+
+%%%%%%   Funk do head
+%          Parabolic on one side, vertical line on other
+%          Has up and down shapes for *all* notes
+%
+def draw_Funk_do_head (expr width_factor, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius,
+                     .3 * (h + d) / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  rt x1 = w;
+  bot y1 = -d;
+
+  lft x2 = 0;
+  y2 = 0.5 [y1, y3];
+
+  x3 = x1;
+  top y3 = h;
+
+  x4 = x1 - pen_radius;
+  y4 = y1 + offset * pen_radius;
+
+  y5 = y2;
+  x5 = x2 + pen_radius;
+
+  x6 = x4;
+  y6 = y3 - offset * pen_radius;
+
+  save p_up_in, p_up_out, p_down_in, p_down_out;
+  path p_up_in, p_up_out, p_down_in, p_down_out;
+
+  p_down_in := z4{left}
+               ... z5{up}
+               ... z6{right}
+               -- cycle;
+
+  p_down_out := bot z1{left}
+                .. lft z2{up}
+                .. top z3{right}
+                .. rt z3{down}
+                -- rt z1{down}
+                .. cycle;
+
+  p_up_in := p_down_in rotated 180 shifted (w,0);
+  p_up_out := p_down_out rotated 180 shifted (w,0);
+
+enddef;
+
+
+save funk_do_weight;
+funk_do_weight := 1.7;
+
+fet_beginchar ("whole up Funk dohead", "u0doFunk");
+  draw_Funk_do_head (funk_notehead_width, funk_do_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("whole down Funk dohead", "d0doFunk");
+  draw_Funk_do_head (funk_notehead_width, funk_do_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Funk dohead", "u1doFunk");
+  draw_Funk_do_head (funk_notehead_width, funk_do_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Funk dohead", "d1doFunk");
+  draw_Funk_do_head (funk_notehead_width, funk_do_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter up Funk dohead", "u2doFunk");
+  draw_Funk_do_head (funk_notehead_width, funk_do_weight);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter down Funk dohead", "d2doFunk");
+  draw_Funk_do_head (funk_notehead_width, funk_do_weight);
+  fill p_down_out;
+fet_endchar;
+
+
+%%%%%%  Funk re head
+%       Arrowhead shape.
+%       Has up and down shapes for *all* notes
+%
+def draw_Funk_re_head (expr width_factor, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius, .3 * (h + d) / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  save curve_in;
+  curve_in := 0.9;
+
+  lft x1 = 0;
+  y1 := 0.5 [y2, y4];
+
+  rt x2 = w;
+  top y2 = h;
+
+  x3 := curve_in [x1, x2];
+  y3 := y1;
+
+  x4 = x2;
+  bot y4 = -d;
+
+  z6 = lft z3;
+
+  save ne, se, ne_perp, se_perp;
+  pair ne, se, ne_perp, se_perp;
+
+  ne := unitvector (z2 - z1);
+  se := unitvector (z4 - z1);
+  ne_perp := ne rotated 90;
+  se_perp := se rotated 90;
+
+  save path_a, path_b, path_c, path_d;
+  path path_a, path_b, path_c, path_d;
+  save arrow_a_perp, arrow_b_perp;
+  pair arrow_a_perp, arrow_b_perp;
+
+
+  path_d := z2 .. z3{down} .. z4;
+  arrow_a_perp = unitvector (direction 0 of path_d rotated 90)
+                 * pen_radius;
+
+  arrow_b_perp = unitvector (direction 2 of path_d rotated 90)
+                 * pen_radius;
+
+  path_b := (z1 + se_perp * pen_radius)
+            -- z4 + se_perp * offset * pen_radius;
+  path_a := (z1 - ne_perp * pen_radius)
+            -- z2 - ne_perp * offset * pen_radius;
+  path_c := z2 - arrow_a_perp
+            .. z6{down}
+            .. z4 - arrow_b_perp;
+
+  z5 = path_a intersectionpoint path_b;
+  z7 = path_a intersectionpoint path_c;
+  z8 = path_b intersectionpoint path_c;
+
+  save p_up_in, p_down_in, p_up_out, p_down_out;
+  path p_up_in, p_down_in, p_up_out, p_down_out;
+
+  p_down_in := z5
+               -- z7
+               .. z6{down}
+               .. z8
+               -- cycle;
+
+  p_down_out := lft z1{up}
+                .. (z1 + ne_perp * pen_radius){ne}
+                -- (z2 + ne_perp * pen_radius){ne}
+                .. top z2 {right}
+                .. rt z2{down}
+                .. (z2 + arrow_a_perp)
+                .. rt z3{down}
+                .. (z4 + arrow_b_perp)
+                .. rt z4{down}
+                .. bot z4 {left}
+                .. z4 - se_perp * pen_radius
+                -- z1 - se_perp * pen_radius
+                .. cycle;
+
+  p_up_in := p_down_in rotated 180 shifted (w, 0);
+  p_up_out := p_down_out rotated 180 shifted (w, 0);
+
+ enddef;
+
+
+save funk_re_weight;
+funk_re_weight = 1.7;
+
+fet_beginchar ("whole up Funk rehead", "u0reFunk");
+  draw_Funk_re_head (funk_notehead_width, funk_re_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("whole down Funk rehead", "d0reFunk");
+  draw_Funk_re_head (funk_notehead_width, funk_re_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Funk rehead", "u1reFunk");
+  draw_Funk_re_head (funk_notehead_width, funk_re_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Funk rehead", "d1reFunk");
+  draw_Funk_re_head (funk_notehead_width, funk_re_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter up Funk rehead", "u2reFunk");
+  draw_Funk_re_head (funk_notehead_width, funk_re_weight);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter down Funk rehead", "d2reFunk");
+  draw_Funk_re_head (funk_notehead_width, funk_re_weight);
+  fill p_down_out;
+fet_endchar;
+
+
+%%%%%%  Funk mi head
+%       Diamond shape
+%       Has up and down shapes for all hollow notes
+%
+save funk_mi_weight;
+funk_mi_weight := 1.9;
+
+fet_beginchar ("whole up Funk mihead", "u0miFunk");
+  draw_mi_head (funk_notehead_width, funk_mi_weight, false);
+
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("whole down Funk mihead", "d0miFunk");
+  draw_mi_head (funk_notehead_width, funk_mi_weight, true);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Funk mihead", "u1miFunk");
+  draw_mi_head (funk_notehead_width, funk_mi_weight, false);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Funk mihead", "d1miFunk");
+  draw_mi_head (funk_notehead_width, funk_mi_weight, true);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter Funk mihead", "s2miFunk");
+  draw_mi_head (funk_notehead_width, funk_mi_weight, false);
+  fill path_out;
+fet_endchar;
+
+
+%%%%%%  Funk fa
+%       Triangle shape
+%       Does it rotate for whole notes?
+%       Same as other shape note systems
+%       Need special notes because of special width
+%
+save funk_fa_weight;
+funk_fa_weight := 1.9;
+
+fet_beginchar ("whole up Funk fahead", "u0faFunk");
+  draw_fa_head (funk_notehead_width, funk_fa_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("whole down Funk fahead", "d0faFunk");
+  draw_fa_head (funk_notehead_width, funk_fa_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Funk fahead", "u1faFunk");
+  draw_fa_head (funk_notehead_width, funk_fa_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Funk fahead", "d1faFunk");
+  draw_fa_head (funk_notehead_width, funk_fa_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter up Funk fahead", "u2faFunk");
+  draw_fa_head (funk_notehead_width, funk_fa_weight);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter down Funk fahead", "d2faFunk");
+  draw_fa_head (funk_notehead_width, funk_fa_weight);
+  fill p_down_out;
+fet_endchar;
+
+
+%%%%%%  Funk sol head is the same as the others
+%       Need special character because of skinnier head
+%
+def draw_Funk_sol_head (expr filled) =
+  begingroup
+    save noteheight;
+    noteheight# := solfa_noteheight#;
+    draw_outside_ellipse (1.2, 34, 0.71, 0, 0);
+    if not filled:
+      undraw_inside_ellipse (1.9, 33, 0.74, 5.5 stafflinethickness#, 0);
+    fi
+    draw_staff_if_debugging (-2, 2);
+  endgroup
+enddef;
+
+
+fet_beginchar ("whole Funk solhead", "s0solFunk");
+  draw_Funk_sol_head ( false);
+fet_endchar;
+
+
+fet_beginchar ("half Funk solhead", "s1solFunk");
+  draw_Funk_sol_head ( false);
+fet_endchar;
+
+
+fet_beginchar ("quarter Funk solhead", "s2solFunk");
+  draw_Funk_sol_head ( true);
+fet_endchar;
+
+
+%%%%%%  Funk la head
+%       Rectangle head
+%       Same as for other shape notes
+%       Smaller width requires special characters
+%
+save funk_la_weight;
+funk_la_weight := 1.9;
+
+fet_beginchar ("whole Funk lahead", "s0laFunk");
+  draw_la_head (funk_notehead_width, funk_notehead_width);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half Funk lahead", "s1laFunk");
+  draw_la_head (funk_notehead_width, funk_notehead_width);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter Funk lahead", "s2laFunk");
+  draw_la_head (funk_notehead_width, funk_notehead_width);
+  fill p_out;
+fet_endchar;
+
+
+%%%%%%  Funk ti head
+%       `Sideways snow cone'.
+%       Rotates for all notes.
+%
+def draw_Funk_ti_head (expr width_factor, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+  save cone_width;
+  cone_width = 0.8;
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius,
+                     .33 * (h + d) / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  lft x1 = 0;
+  y1 = .5 [y2, y4];
+
+  x2 = cone_width [x1, x3];
+  top y2 = h;
+
+  rt x3 = w;
+  y3 = y1;
+
+  x4 = x2;
+  bot y4 = -d;
+
+  save nw_dist, sw_dist, ne, se;
+  pair nw_dist, sw_dist, ne, se;
+
+  ne = unitvector (z2 - z1);
+  se = unitvector (z4 - z1);
+
+  nw_dist = (ne rotated 90) * pen_radius;
+  sw_dist = (se rotated -90) * pen_radius;
+
+  save path_a, path_b;
+  path path_a, path_b;
+  path_a := z1 - nw_dist
+            -- z2 - offset * nw_dist;
+  path_b := z1 - sw_dist
+            -- z4 - offset * sw_dist;
+
+  save path_right, path_right_in;
+  path path_right, path_right_in;
+  path_right := (z2 + ne * pen_radius)
+                .. (rt z3){down}
+                .. (z4 + se * pen_radius);
+
+  path_right_in := (z2 - ne * pen_radius)
+                   .. lft z3{down}
+                   .. (z4 - se * pen_radius);
+
+  z5 = path_a intersectionpoint path_b;
+  z6 = path_a intersectionpoint path_right_in;
+  z7 = path_b intersectionpoint path_right_in;
+
+  save p_up_in, p_down_in, p_up_out, p_down_out;
+  path p_up_in, p_down_in, p_up_out, p_down_out;
+
+  p_down_in := z5
+               -- z6
+               .. lft z3
+               .. z7
+               -- cycle;
+
+  p_down_out := lft z1
+                .. (z1 + nw_dist)
+                -- (z2 + nw_dist)
+                .. top z2
+                .. (z2 + ne * pen_radius){direction 0 of path_right}
+                & path_right
+                & {direction infinity of path_right}(z4 + se * pen_radius)
+                .. bot z4
+                .. (z4 + sw_dist)
+                -- (z1 + sw_dist)
+                .. cycle;
+
+  p_up_in := p_down_in rotated 180 shifted (w, 0);
+  p_up_out := p_down_out rotated 180 shifted (w, 0);
+enddef;
+
+
+save funk_ti_weight;
+funk_ti_weight := 1.6;
+
+fet_beginchar ("whole up Funk tihead", "u0tiFunk");
+  draw_Funk_ti_head (funk_notehead_width, funk_ti_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("whole down Funk tihead", "d0tiFunk");
+  draw_Funk_ti_head (funk_notehead_width, funk_ti_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Funk tihead", "u1tiFunk");
+  draw_Funk_ti_head (funk_notehead_width, funk_ti_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Funk tihead", "d1tiFunk");
+  draw_Funk_ti_head (funk_notehead_width, funk_ti_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter up Funk tihead", "u2tiFunk");
+  draw_Funk_ti_head (funk_notehead_width, funk_ti_weight);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter down Funk tihead", "d2tiFunk");
+  draw_Funk_ti_head (funk_notehead_width, funk_ti_weight);
+  fill p_down_out;
+fet_endchar;
+
+
+%%%%%%   Walker shape note heads
+%
+% Walker heads are narrow like Funk heads, so use funk_notehead_width.
+%
+
+%%%%%%   Walker do head
+%
+% Trapezoid, with largest side on stem side
+%
+def draw_Walker_do_head (expr width_factor, dir, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  pickup pencircle scaled solfa_pen_thick;
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  % adjust width so stem can be centered
+  if .5w <> good.x .5w: change_width; fi
+
+  save scaling;
+
+  scaling# = charwd / w;
+
+  save inset;
+  inset := 0.25;
+
+  x1 = inset [x4, x3];
+  top y1 = h;
+
+  x2 = inset [x3, x4];
+  y2 = y1;
+
+  bot y3 = -d;
+  rt x3 = w;
+
+  y4 = y3;
+  lft x4 = 0;
+
+  labels (range 1 thru 4);
+
+  save left_dir, left_perp, right_dir, right_perp;
+  pair left_dir, left_perp, right_dir, right_perp;
+
+  left_dir = unitvector (z1 - z4);
+  left_perp = (left_dir rotated 90) * solfa_pen_radius;
+  right_dir = unitvector (z3 - z2);
+  right_perp = (right_dir rotated 90) * solfa_pen_radius;
+
+  save path_a, path_b, path_c, path_d;
+  path path_a, path_b, path_c, path_d;
+
+  path_a := (z4 - left_perp)
+            -- (z1 - left_perp);
+  path_b := (z1 - (0, offset*solfa_pen_radius))
+            -- (z2 - (0, offset*solfa_pen_radius));
+  path_c := (z2 - right_perp)
+            -- (z3 - right_perp);
+  path_d := (z3 + (0, offset*solfa_pen_radius))
+            -- (z4 + (0, offset*solfa_pen_radius));
+
+  save p_in, p_out;
+  path p_in, p_out;
+
+  p_in := (path_a intersectionpoint path_b)
+          -- (path_b intersectionpoint path_c)
+          -- (path_c intersectionpoint path_d)
+          -- (path_d intersectionpoint path_a)
+          -- cycle;
+
+  p_out := top z1{right}
+           -- top z2{right}
+           .. z2 + right_perp {right_dir}
+           -- z3 + right_perp {right_dir}
+           .. bot z3{left}
+           -- bot z4{left}
+           .. z4 + left_perp {left_dir}
+           .. z1 + left_perp {left_dir}
+           .. cycle;
+
+  charwx := scaling# * (w/2 + solfa_pen_radius);
+  charwy := scaling# * y2;
+
+  if dir = 1:
+    p_in := p_in rotated 180 shifted (w,0);
+    p_out := p_out rotated 180 shifted (w,0);
+  fi;
+enddef;
+
+
+save walker_do_weight;
+walker_do_weight := 1.5;
+
+fet_beginchar ("whole Walker dohead", "s0doWalker");
+  draw_Walker_do_head (funk_notehead_width, 0, walker_do_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Walker dohead", "u1doWalker");
+  draw_Walker_do_head (funk_notehead_width, 1, walker_do_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Walker dohead", "d1doWalker");
+  draw_Walker_do_head (funk_notehead_width, 0, walker_do_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter up Walker dohead", "u2doWalker");
+  draw_Walker_do_head (funk_notehead_width, 1, walker_do_weight);
+  fill p_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter down Walker dohead", "d2doWalker");
+  draw_Walker_do_head (funk_notehead_width, 0, walker_do_weight);
+  fill p_out;
+fet_endchar;
+
+
+%%%%%%   Walker re head
+%          Parabolic on one side, shallow parabola on other
+%          Has up and down shapes for *all* notes
+%
+def draw_Walker_re_head (expr width_factor, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius,
+                     .3 * (h + d) / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  save dish_factor;
+  dish_factor := 0.20;
+
+  rt x1 = w;
+  bot y1 = -d;
+
+  lft x2 = 0;
+  y2 = 0.5 [y1, y3];
+
+  top y3 = h;
+  x3 = x1;
+
+  x4 = dish_factor [x1, x2];
+  y4 = y2;
+
+  x5 = x1;
+  y5 = y1 + offset * pen_radius;
+
+  y6 = y2;
+  x6 = x2 + pen_radius;
+
+  x7 = x3;
+  y7 = y3 - offset * pen_radius;
+
+  y8 = y4;
+  x8 = x4 - pen_radius;
+
+  save path_a, path_d;
+  path path_a, path_d;
+
+  save p_a_start_dir, p_a_end_dir, p_a_start_perp, p_a_end_perp;
+  pair p_a_start_dir, p_a_end_dir, p_a_start_perp, p_a_end_perp;
+
+  path_a := z3
+            .. z4{down}
+            .. z1;
+
+  p_a_start_dir := unitvector (direction 0 of path_a);
+  p_a_end_dir := unitvector (direction infinity of path_a);
+  p_a_start_perp := (p_a_start_dir rotated 90) * pen_radius;
+  p_a_end_perp := (p_a_end_dir rotated 90) * pen_radius;
+
+  path_d := (z3 - p_a_start_perp){p_a_start_dir}
+            .. z4 {down}
+            .. (z1 - p_a_end_perp){p_a_end_dir};
+
+  save path_b, path_c;
+  path path_b, path_c;
+
+  path_b := z5 {left}
+            .. z6{up};
+  path_c := z7 {left}
+            .. z6{down};
+
+  z9 = path_d intersectionpoint path_b;
+  z10 = path_d intersectionpoint path_c;
+
+  labels (range 1 thru 4);
+
+  save p_up_in, p_up_out, p_down_in, p_down_out;
+  path p_up_in, p_up_out, p_down_in, p_down_out;
+
+  p_down_in := z6{up}
+               ... {right} z10 {p_a_start_dir}
+               .. z8{down}
+               .. {p_a_end_dir} z9 {left}
+               ... cycle;
+
+  p_down_out := lft z2{up}
+                .. top z3{right}
+                .. rt z3
+                .. (z3 + p_a_start_perp){p_a_start_dir}
+                .. rt z4{down}
+                .. (z1 + p_a_end_perp) {p_a_end_dir}
+                .. rt z1
+                .. bot z1 {left}
+                .. cycle;
+
+  p_up_in := p_down_in rotated 180 shifted (w,0);
+  p_up_out := p_down_out rotated 180 shifted (w,0);
+enddef;
+
+
+save walker_re_weight;
+walker_re_weight := 1.2;
+
+fet_beginchar ("whole Walker rehead", "s0reWalker");
+  draw_Walker_re_head (funk_notehead_width, walker_re_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Walker rehead", "u1reWalker");
+  draw_Walker_re_head (funk_notehead_width, walker_re_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Walker rehead", "d1reWalker");
+  draw_Walker_re_head (funk_notehead_width, walker_re_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter up Walker rehead", "u2reWalker");
+  draw_Walker_re_head (funk_notehead_width, walker_re_weight);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter down Walker rehead", "d2reWalker");
+  draw_Walker_re_head (funk_notehead_width, walker_re_weight);
+  fill p_down_out;
+fet_endchar;
+
+
+%%%%%%  Walker mi head
+%       Diamond shape
+%       Symmetric for all hollow notes
+%
+save walker_mi_width, walker_mi_weight;
+walker_mi_width := 1;
+walker_mi_weight := 1.5;
+
+fet_beginchar ("whole Walker mihead", "s0miWalker");
+  draw_mi_head (walker_mi_width * funk_notehead_width,
+                walker_mi_weight, true);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("half Walker mihead", "s1miWalker");
+  draw_mi_head (walker_mi_width * funk_notehead_width,
+                walker_mi_weight, true);
+  fill path_out;
+  unfill path_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter Walker mihead", "s2miWalker");
+  draw_mi_head (walker_mi_width * funk_notehead_width,
+                walker_mi_weight, true);
+  fill path_out;
+fet_endchar;
+
+
+%%%%%%  Walker fa
+%       Triangle shape
+%       Does not rotate for whole notes
+%       Whole rotation is different from Funk, so special notes
+
+%%%%%%  Funk sol head is the same as the others
+%       Need special character because of skinnier head
+%
+save walker_fa_weight;
+walker_fa_weight := 1.5;
+
+fet_beginchar ("whole Walker fahead", "s0faWalker");
+  draw_fa_head (funk_notehead_width, walker_fa_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Walker fahead", "u1faWalker");
+  draw_fa_head (funk_notehead_width, walker_fa_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Walker fahead", "d1faWalker");
+  draw_fa_head (funk_notehead_width, walker_fa_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter up Walker fahead", "u2faWalker");
+  draw_fa_head (funk_notehead_width, walker_fa_weight);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter down Walker fahead", "d2faWalker");
+  draw_fa_head (funk_notehead_width, walker_fa_weight);
+  fill p_down_out;
+fet_endchar;
+
+
+%%%%%%  Walker sol
+%       Same as Funk, no special notes
+%
+
+%%%%%%  Walker la head
+%       Rectcangle head
+%       Lighter weight requires separate notes
+%
+save walker_la_weight;
+walker_la_weight := 1.5;
+
+fet_beginchar ("whole Walker lahead", "s0laWalker");
+  draw_la_head (funk_notehead_width, walker_la_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("half Funk lahead", "s1laWalker");
+  draw_la_head (funk_notehead_width, walker_la_weight);
+  fill p_out;
+  unfill p_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter Funk lahead", "s2laWalker");
+  draw_la_head (funk_notehead_width, walker_la_weight);
+  fill p_out;
+fet_endchar;
+
+
+%%%%%%  Walker ti head
+%       Triangular arrowhead
+%       Rotates for all but whole notes
+%
+def draw_Walker_ti_head (expr width_factor, thickness_factor) =
+  set_char_box (0, width_factor * solfa_base_notewidth#,
+                0.5 solfa_noteheight#, 0.5 solfa_noteheight#);
+
+  save offset;
+  offset := 2 * thickness_factor - 1;
+
+  save pen_radius;
+  pen_radius := min (solfa_pen_radius,
+                     .3 * (h + d) / (1 + offset));
+
+  pickup pencircle scaled (2 * pen_radius);
+
+  lft x1 = 0;
+  y1 = .5 [y2, y3];
+
+  rt x2 = w;
+  top y2 = h;
+
+  x3 = x2;
+  bot y3 = -d;
+
+
+  labels (range 1 thru 4);
+
+  save nw_dist, sw_dist, ne, se;
+  pair nw_dist, sw_dist, ne, se;
+
+  ne = unitvector (z2 - z1);
+  se = unitvector (z3 - z1);
+
+  nw_dist = (ne rotated 90) * pen_radius;
+  sw_dist = (se rotated -90) * pen_radius;
+
+
+  save path_a, path_b, path_c;
+  path path_a, path_b, path_c;
+  path_a := z2 - nw_dist * offset
+            -- z1 - nw_dist * offset;
+  path_b := z3 - sw_dist * offset
+            -- z1 - sw_dist * offset;
+  path_c := z2 + left * pen_radius
+            -- z3 + left * pen_radius;
+
+  z4 = path_a intersectionpoint path_b;
+  z5 = path_a intersectionpoint path_c;
+  z6 = path_b intersectionpoint path_c;
+
+  save p_up_in, p_down_in, p_up_out, p_down_out;
+  path p_up_in, p_down_in, p_up_out, p_down_out;
+
+  p_down_in := z4
+               -- z5
+               -- z6
+               -- cycle;
+
+  p_down_out := lft z1{up}
+                .. (z1 + nw_dist){ne}
+                -- (z2 + nw_dist){ne}
+                .. top z2{right}
+                .. rt z2 {down}
+                -- rt z3 {down}
+                .. bot z3 {left}
+                .. (z3 + sw_dist){- se}
+                .. (z1 + sw_dist){- se}
+                .. cycle;
+
+  p_up_in := p_down_in rotated 180 shifted (w, 0);
+  p_up_out := p_down_out rotated 180 shifted (w, 0);
+enddef;
+
+
+save walker_ti_weight;
+walker_ti_weight := 1.4;
+
+fet_beginchar ("whole Walker tihead", "s0tiWalker");
+  draw_Walker_ti_head (funk_notehead_width, walker_ti_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("half up Walker tihead", "u1tiWalker");
+  draw_Walker_ti_head (funk_notehead_width, walker_ti_weight);
+  fill p_up_out;
+  unfill p_up_in;
+fet_endchar;
+
+
+fet_beginchar ("half down Walker tihead", "d1tiWalker");
+  draw_Walker_ti_head (funk_notehead_width, walker_ti_weight);
+  fill p_down_out;
+  unfill p_down_in;
+fet_endchar;
+
+
+fet_beginchar ("quarter up Walker tihead", "u2tiWalker");
+  draw_Walker_ti_head (funk_notehead_width, walker_ti_weight);
+  fill p_up_out;
+fet_endchar;
+
+
+fet_beginchar ("quarter down Walker tihead", "d2tiWalker");
+  draw_Walker_ti_head (funk_notehead_width, walker_ti_weight);
+  fill p_down_out;
+fet_endchar;
+
+fet_endgroup ("noteheads");
+
+
+%
+% we derive black_notehead_width# from the quarter head,
+% so we have to define black_notehead_width (pixel qty)
+% after the black_notehead_width# itself.
+%
+% Let's keep it outside the group as well.
+%
+
+define_pixels (black_notehead_width);