zstd 1.5.6.3__cp36-cp36m-manylinux_2_4_i686.whl

zstd-1.5.6.3.dist-info/LICENSE

@@ -0,0 +1,24 @@
+Copyright (c) 2015-2022, Sergey Dryabzhinsky, Anton Stuk
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+

zstd-1.5.6.3.dist-info/METADATA

@@ -0,0 +1,496 @@
+Metadata-Version: 2.1
+Name: zstd
+Version: 1.5.6.3
+Summary: ZSTD Bindings for Python
+Home-page: https://github.com/sergey-dryabzhinsky/python-zstd
+Author: Sergey Dryabzhinsky, Anton Stuk
+Author-email: sergey.dryabzhinsky@gmail.com
+Maintainer: Sergey Dryabzhinsky
+Maintainer-email: sergey.dryabzhinsky@gmail.com
+License: BSD
+Keywords: zstd,zstandard,compression
+Platform: UNKNOWN
+Classifier: License :: OSI Approved :: BSD License
+Classifier: Intended Audience :: Developers
+Classifier: Development Status :: 5 - Production/Stable
+Classifier: Operating System :: POSIX
+Classifier: Programming Language :: C
+Classifier: Programming Language :: Python
+Classifier: Programming Language :: Python :: 2.7
+Classifier: Programming Language :: Python :: 3.4
+Classifier: Programming Language :: Python :: 3.5
+Classifier: Programming Language :: Python :: 3.6
+Classifier: Programming Language :: Python :: 3.7
+Classifier: Programming Language :: Python :: 3.8
+Classifier: Programming Language :: Python :: 3.9
+Classifier: Programming Language :: Python :: 3.10
+Classifier: Programming Language :: Python :: 3.11
+Classifier: Programming Language :: Python :: 3.12
+Classifier: Programming Language :: Python :: 3.13
+Classifier: Programming Language :: Python :: 3.14
+License-File: LICENSE
+
+=============
+python-zstd
+=============
+
+.. |releaseW| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/build-wheels.yml/badge.svg?tag=v1.5.6.3
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/build-wheels.yml
+
+.. |masterW| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/build-wheels.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/build-wheels.yml
+
+.. |cpython27x64| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython27_x86_64.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython27_x86_64.yml
+
+.. |cpython27x86| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython27_x86.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython27_x86.yml
+
+.. |cpython27armhf| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython27_armhf.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython27_armhf.yml
+
+.. |cpython34x86| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython34_x86.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython34_x86.yml
+
+.. |cpython34x64| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython34_x86_64.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython34_x86_64.yml
+
+.. |cpython35x86| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython35_x86.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython35_x86.yml
+
+.. |cpython35x64| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython35_x86_64.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython35_x86_64.yml
+
+.. |cpython36x86| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython36_x86.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython36_x86.yml
+
+.. |cpython36x64| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython36_x86_64.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython36_x86_64.yml
+
+.. |cpython37x86| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython37_x86.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython37_x86.yml
+
+.. |cpython37x64| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython37_x86_64_u24.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython37_x86_64_u24.yml
+
+.. |cpython38x86| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython38_x86.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython38_x86.yml
+
+.. |cpython38x64| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython38_x86_64_u24.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython38_x86_64_u24.yml
+
+.. |cpython39x86| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython39_x86.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython39_x86.yml
+
+.. |cpython39x64| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython39_x86_64_u24.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython39_x86_64_u24.yml
+
+.. |cpython310x86u16| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython310_x86_u16.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython310_x86_u16.yml
+
+.. |cpython310x64u20| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython310_x86_64_u24.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython310_x86_64_u24.yml
+
+.. |cpython311x86u16| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython311_x86_u16.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython311_x86_u16.yml
+
+.. |cpython311x64u20| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython311_x86_64_u24.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython311_x86_64_u24.yml
+
+.. |cpython312x86u16| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython312_x86_u16.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython312_x86_u16.yml
+
+.. |cpython312x64u20| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython312_x86_64_u20.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython312_x86_64_u20.yml
+
+.. |cpython313x64u20| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython313_x86_64_u24.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython313_x86_64_u24.yml
+
+.. |cpython314x64u20| image:: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython314_x86_64_u24.yml/badge.svg
+    :target: https://github.com/sergey-dryabzhinsky/python-zstd/actions/workflows/Build_wheels_for_cpython314_x86_64_u24.yml
+
++----------------------+---------------------+
+| wheels for:          |      status         |
++======================+=====================+
+| cpython 2.7 x86      | |cpython27x86|      |
++----------------------+---------------------+
+| cpython 2.7 x64      | |cpython27x64|      |
++----------------------+---------------------+
+| cpython 2.7 armhf    | |cpython27armhf|    |
++----------------------+---------------------+
+| cpython 3.4 x86      | |cpython34x86|      |
++----------------------+---------------------+
+| cpython 3.4 x64      | |cpython34x64|      |
++----------------------+---------------------+
+| cpython 3.5 x86      | |cpython35x86|      |
++----------------------+---------------------+
+| cpython 3.5 x64      | |cpython35x64|      |
++----------------------+---------------------+
+| cpython 3.6 x86      | |cpython36x86|      |
++----------------------+---------------------+
+| cpython 3.6 x64      | |cpython36x64|      |
++----------------------+---------------------+
+| cpython 3.7 x86      | |cpython37x86|      |
++----------------------+---------------------+
+| cpython 3.7 x64 u24  | |cpython37x64|      |
++----------------------+---------------------+
+| cpython 3.8 x86      | |cpython38x86|      |
++----------------------+---------------------+
+| cpython 3.8 x64 u24  | |cpython38x64|      |
++----------------------+---------------------+
+| cpython 3.9 x86      | |cpython39x86|      |
++----------------------+---------------------+
+| cpython 3.9 x64 u24  | |cpython39x64|      |
++----------------------+---------------------+
+| cpython 3.10 x86 u16 | |cpython310x86u16|  |
++----------------------+---------------------+
+| cpython 3.10 x64 u24 | |cpython310x64u20|  |
++----------------------+---------------------+
+| cpython 3.11 x86 u16 | |cpython311x86u16|  |
++----------------------+---------------------+
+| cpython 3.11 x64 u24 | |cpython311x64u20|  |
++----------------------+---------------------+
+| cpython 3.12 x86 u16 | |cpython312x86u16|  |
++----------------------+---------------------+
+| cpython 3.12 x64 u24 | |cpython312x64u20|  |
++----------------------+---------------------+
+| cpython 3.13 x64 u24 | |cpython313x64u20|  |
++----------------------+---------------------+
+| cpython 3.14 x64 u24 | |cpython314x64u20|  |
++----------------------+---------------------+
+| Release              | |releaseW|          |
+| 1.5.6.3              |                     |
++----------------------+---------------------+
+| Master               | |masterW|           |
++----------------------+---------------------+
+
+Simple python bindings to Yann Collet ZSTD compression library.
+
+**Zstd**, short for Zstandard, is a new lossless compression algorithm,
+ which provides both good compression ratio *and* speed for your standard compression needs.
+ "Standard" translates into everyday situations which neither look for highest possible ratio
+ (which LZMA and ZPAQ cover) nor extreme speeds (which LZ4 covers).
+
+It is provided as a BSD-license package, hosted on GitHub_.
+
+.. _GitHub: https://github.com/facebook/zstd
+
+
+WARNING!!!
+----------
+
+If you setup 1.0.0.99.1 version - remove it manualy to able to update.
+PIP matching version strings not tuple of numbers.
+
+Result generated by versions prior to 1.0.0.99.1 is not compatible with orignial Zstd
+by any means. It generates custom header and can be read only by zstd python module.
+
+As of 1.0.0.99.1 version it uses standard Zstd output, not modified.
+
+To prevent data loss there is two functions now: ```compress_old``` and ```decompress_old```.
+They are works just like in old versions prior to 1.0.0.99.1.
+
+As of 1.1.4 version module build without them by default.
+
+As of 1.3.4 version these functions are deprecated and will be removed in future releases.
+
+As of 1.5.0 version these functions are removed.
+
+
+DISCLAIMER
+__________
+
+These python bindings are kept simple and blunt.
+
+Support of dictionaries and streaming is not planned.
+
+
+LINKS
+-----
+
+* Zstandard: https://github.com/facebook/zstd
+* More full-featured and compatible with Zstandard python bindings by Gregory Szorc: https://github.com/indygreg/python-zstandard
+
+
+Build from source
+-----------------
+
+   >>> $ git clone https://github.com/sergey-dryabzhinsky/python-zstd
+   >>> $ git submodule update --init
+   >>> $ apt-get install python-dev python3-dev python-setuptools python3-setuptools
+   >>> $ python setup.py build_ext clean
+   >>> $ python3 setup.py build_ext clean
+
+And you need to install `libzstd` developer files at least version *1.4.0*:
+
+    >>> $ dnf install -y libzstd-devel
+    # or
+    >>> $ apt install -y libzstd-dev
+    # or
+    >>> $ apk add zstd-dev
+
+or do manual installation of zstd from source.
+
+Note: Zstd legacy format support disabled by default.
+To build with Zstd legacy versions support - pass ``--legacy`` option to setup.py script:
+
+   >>> $ python setup.py build_ext --legacy clean
+
+When using a PEP 517 builder you can use ``ZSTD_LEGACY`` environment variable instead:
+
+   >>> $ ZSTD_LEGACY=1 python -m build -w
+
+Note: Python-Zstd legacy format support removed since 1.5.0.
+If you need to convert old data - checkout 1.4.9.1 module version. Support of it disabled by default.
+To build with python-zstd legacy format support (pre 1.1.2) - pass ``--pyzstd-legacy`` option to setup.py script:
+
+   >>> $ python setup.py build_ext --pyzstd-legacy clean
+
+But beware! Legacy formats support state is unknown in this case.
+And if your version not equal with python-zstd - tests may not pass.
+
+If you're scared of threads you may pass option `--libzstd-no-threads`:
+
+   >>> $ python setup.py build_ext --libzstd-no-threads clean
+
+When using a PEP 517 builder you can use ``ZSTD_THREADS`` environment variable instead:
+
+   >>> $ ZSTD_THREADS=0 python -m build -w
+
+If you're meet some cpu instruction errorrs you may try to disable built-in optimizations and pass option `--libzstd-no-use-asm`:
+
+   >>> $ python setup.py build_ext --libzstd-no-use-asm clean
+
+Or add more speed with option `--libzstd-use-asm-bmi2` to use instructions for new AMD CPU.
+When using a PEP 517 builder you can use ``ZSTD_ASM`` environment variable instead:
+And ``ZST_ASM_BMI2=1`` too for bmi2 use.
+
+   >>> $ ZSTD_ASM=0 python -m build -w
+
+If you want bo build smaller module by size try to use option `--small`, but it will work slower.
+
+   >>> $ python setup.py build_ext --small clean
+
+When using a PEP 517 builder you can use ``ZSTD_SMALL`` environment variable instead:
+
+   >>> $ ZSTD_SMALL=1 python -m build -w
+
+If you want to build with existing distribution of libzstd just add ``--external`` option
+
+   >>> $ python setup.py build_ext --external clean
+
+When using a PEP 517 builder you can use ``ZSTD_EXTERNAL`` environment variable instead:
+
+   >>> $ ZSTD_EXTERNAL=1 python -m build -w
+
+If paths to header file ``zstd.h`` and libraries is uncommon - use common ``build`` params:
+--libraries --include-dirs --library-dirs.
+
+   >>> $ python setup.py build_ext --external --include-dirs /opt/zstd/usr/include --libraries zstd --library-dirs /opt/zstd/lib clean
+
+But If you want to build with bundled distribution of libzstd just add ``--
+libzstd-bundled`` option
+
+   >>> $ python setup.py build_ext --libzstd-bundled clean
+
+When using a PEP 517 builder you can use ``ZSTD_BUNDLED`` environment variable instead:
+
+   >>> $ ZSTD_BUNDLED=1 python -m build -w
+
+Install from pypi
+-----------------
+
+   >>> # for Python 2.7+
+   >>> $ pip install zstd
+   >>> # or for Python 3.4+
+   >>> $ pip3 install zstd
+
+
+API
+___
+
+Error
+  Standard python Exception for zstd module
+
+ZSTD_compress (data[, level, threads, strict]): string|bytes
+  Function, compress input data block via mutliple threads, return compressed block, or raises Error.
+
+  Params:
+
+  * **data**: string|bytes - input data block, length limited by 2Gb by Python API
+  * **level**: int - compression level, ultra-fast levels from -100 (ultra) to -1 (fast) available since zstd-1.3.4, and from 1 (fast) to 22 (slowest), 0 or unset - means default (3). Default - 3.
+  * **threads**: int - how many threads to use, from 0 to 200, 0 or unset - auto-tune by cpu cores count. Default - 0. Since: 1.4.4.1
+  * **strict**: int - strict behaviour, raise `zstd.Error` if threads number or compression level is beyond limitations. Default - 0. Since: 1.5.6.3
+  
+  Aliases:
+       - *compress(...)*, 
+       - *dumps(...)*, 
+       - *encode(...)* since: 1.5.6.2
+
+  Exception if:
+  - level bigger than max level
+
+  Max number of threads:
+  - 32bit system: 64
+  - 64bit system: 256
+  If provided bigger number - silently set maximber (since 1.5.4.1)
+
+  Since: 0.1
+
+ZSTD_uncompress (data): string|bytes
+  Function, decompress input compressed data block, return decompressed block, or raises Error.
+
+  Support compressed data with multiple/concatenated frames (blocks) (since 1.5.5.1).
+
+  Params:
+
+  * **data**: string|bytes - input compressed data block, length limited by 2Gb by Python API
+
+  Aliases: 
+     - *decompress(...)*, 
+     - *uncompress(...)*,  
+     - *loads(...)*, 
+     - *decode(...)* since: 1.5.6.2
+
+  Since: 0.1
+
+ZSTD_check (data): int
+  Function, checks if input is zstd compressed data block, returns 1 if yes, 0 if no, or raises Error.
+
+  Support compressed data with multiple/concatenated frames (blocks) .
+
+  Params:
+
+  * **data**: string|bytes - input compressed data block, length limited by 2Gb by Python API
+
+  Aliases:
+     - *check(...)*,
+     - *verify(...)* since: 1.5.6.3
+
+  Since: 1.5.6.2
+
+version (): string|bytes
+  Returns this module doted version string.
+
+  The first three digits are folow libzstd version.
+  Fourth digit - module release number for that version.
+
+  Since: 1.3.4.3
+
+ZSTD_version (): string|bytes
+  Returns ZSTD library doted version string.
+
+  Since: 1.3.4.3
+
+ZSTD_version_number (): int
+  Returns ZSTD library version in format: MAJOR*100*100 + MINOR*100 + RELEASE.
+
+  Since: 1.3.4.3
+
+ZSTD_threads_count (): int
+  Returns ZSTD determined CPU cores count.
+
+  Since: 1.5.4.1
+
+ZSTD_max_threads_count (): int
+  Returns ZSTD library determined maximum working threads count.
+
+  Since: 1.5.4.1
+
+ZSTD_max_compression_level (): int
+  Returns ZSTD library determined maximum number of compression level .
+
+  Since: 1.5.6.3
+
+ZSTD_min_compression_level (): int
+  Returns ZSTD library determined minimum number of compression level .
+
+  Since: 1.5.6.3
+
+ZSTD_external (): int
+  Returns 0 of 1 if ZSTD library linked as external.
+
+  Since: 1.5.0.2
+
+ZSTD_legacy_support (): int
+  Returns 0 of 1 if ZSTD library built with legacy formats support.
+
+  Since: 1.5.6.3
+
+ZSTD_with_threads (): int
+  Returns 0 of 1 if bundled ZSTD library build with threads support.
+
+  Since: 1.5.6.2
+
+ZSTD_with_asm (): int
+  Returns 0 of 1 if bundled ZSTD library build with asm optimization s.
+
+  Since: 1.5.6.2
+
+
+Removed
+_______
+
+ZSTD_compress_old (data[, level]): string|bytes
+  Function, compress input data block, return compressed block, or raises Error.
+
+  **DEPRECATED**: Returns not compatible with ZSTD block header
+
+  **REMOVED**: since 1.5.0
+
+  Params:
+
+  * **data**: string|bytes - input data block, length limited by 2Gb by Python API
+  * **level**: int - compression level, ultra-fast levels from -5 (ultra) to -1 (fast) available since zstd-1.3.4, and from 1 (fast) to 22 (slowest), 0 or unset - means default (3). Default - 3.
+
+  Since: 1.0.0.99.1
+
+ZSTD_uncompress_old (data): string|bytes
+  Function, decompress input compressed data block, return decompressed block, or raises Error.
+
+  **DEPRECATED**: Accepts data with not compatible with ZSTD block header
+
+  **REMOVED**: since 1.5.0
+
+  Params:
+
+  * **data**: string|bytes - input compressed data block, length limited by 2Gb by Python API
+
+  Since: 1.0.0.99.1
+
+Use
+___
+
+Module has simple API:
+
+   >>> import zstd
+   >>> dir(zstd)
+   ['Error', 'ZSTD_compress', 'ZSTD_external', 'ZSTD_uncompress', 'ZSTD_version', 'ZSTD_version_number', '__doc__', '__file__', '__loader__', '__name__', '__package__', '__spec__', 'compress', 'decompress', 'dumps', 'loads', 'uncompress', 'version']
+   >>> zstd.version()
+   '1.5.1.0'
+   >>> zstd.ZSTD_version()
+   '1.5.1'
+   >>> zstd.ZSTD_version_number()
+   10501
+   >>> zstd.ZSTD_external()
+   0
+
+In python2
+
+   >>> data = "123456qwert"
+
+In python3 use bytes
+
+   >>> data = b"123456qwert"
+
+
+   >>> cdata = zstd.compress(data, 1)
+   >>> data == zstd.decompress(cdata)
+   True
+   >>> cdata_mt = zstd.compress(data, 1, 4)
+   >>> cdata == cdata_mt
+   True
+   >>> data == zstd.decompress(cdata_mt)
+   True
+
+

zstd-1.5.6.3.dist-info/RECORD

@@ -0,0 +1,6 @@
+zstd.cpython-36m-i386-linux-gnu.so,sha256=6XYuqO1PRsdliSho6XXX4kWQ3bGP7zV1C1Nfet72jiY,624640
+zstd-1.5.6.3.dist-info/LICENSE,sha256=uFlI3LUItL6HHwW5JwyqwrihDxfV2LORnmQkAhy3b-8,1320
+zstd-1.5.6.3.dist-info/METADATA,sha256=GPjOBVhjl8e89gkMvWzqzAKTquYk7141cd2D3FhDR8Q,20335
+zstd-1.5.6.3.dist-info/WHEEL,sha256=h-NjklnXDBEy_A62Gokctr8w9syUJEGS1wOMj7saliI,102
+zstd-1.5.6.3.dist-info/top_level.txt,sha256=DhQX04hbm3dWgbCywpue8ejkkSuxZjpZGkVlo8ca-jM,5
+zstd-1.5.6.3.dist-info/RECORD,,

zstd-1.5.6.3.dist-info/WHEEL

@@ -0,0 +1,5 @@
+Wheel-Version: 1.0
+Generator: bdist_wheel (0.37.1)
+Root-Is-Purelib: false
+Tag: cp36-cp36m-linux_i686
+

zstd-1.5.6.3.dist-info/top_level.txt

@@ -0,0 +1 @@
+zstd