zrb 0.28.1__py3-none-any.whl → 1.0.0a1__py3-none-any.whl

zrb/builtin/project/add/fastapp/app/template/src/kebab-zrb-app-name/deployment/helm-charts/signoz/values.yaml

@@ -1,2907 +0,0 @@
-# Global override values
-global:
-  # -- Overrides the Image registry globally
-  imageRegistry: &GLOBAL_IMAGE_REGISTRY null
-  # -- Global Image Pull Secrets
-  imagePullSecrets: []
-  # -- Overrides the storage class for all PVC with persistence enabled.
-  # If not set, the default storage class is used.
-  # If set to "-", storageClassName: "", which disables dynamic provisioning
-  storageClass: null
-  # -- Kubernetes cluster domain
-  # It is used only when components are installed in different namespace
-  clusterDomain: cluster.local
-  # -- Kubernetes cluster name
-  # It is used to attached to telemetry data via resource detection processor
-  clusterName: ""
-  # -- Kubernetes cluster cloud provider along with distribution if any.
-  # example: `aws`, `azure`, `gcp`, `gcp/autogke`, `hcloud`, `other`
-  # Based on the cloud, storage class for the persistent volume is selected.
-  # When set to 'aws' or 'gcp' along with `installCustomStorageClass` enabled, then new expandible storage class is created.
-  cloud: other
-
-# -- SigNoz chart name override
-nameOverride: ""
-
-# -- SigNoz chart full name override
-fullnameOverride: ""
-
-# -- Name of the K8s cluster. Used by SigNoz OtelCollectors to attach in telemetry data.
-clusterName: ""
-
-# -- Image Registry Secret Names for all SigNoz components.
-# If global.imagePullSecrets is set as well, it will merged.
-# However, this has lower precedence than the imagePullSecrets at inner component level.
-imagePullSecrets: []
-# - "signoz-pull-secret"
-
-# Clickhouse default values
-# For complete list of configurations, check `values.yaml` of `clickhouse` chart.
-# @ignored
-clickhouse:
-  # -- Whether to install clickhouse. If false, `clickhouse.host` must be set
-  enabled: true
-
-  # Zookeeper default values
-  # Ref: https://github.com/bitnami/charts/blob/main/bitnami/zookeeper/values.yaml
-  #
-  # @ignored
-  zookeeper:
-    # Refer to zookeeper section in values.yaml of clickhouse chart
-    # to know the default values.
-    #
-    # Please DO NOT override this value.
-    # This chart installs Zookeeper separately.
-    # Only if you know what you are doing, proceed with overriding.
-    #
-
-    # -- Whether to install zookeeper. If false, `clickhouse.externalZookeeper` must be set.
-    enabled: true
-
-    # Zookeeper image
-    image:
-      # -- Zookeeper image registry to use.
-      registry: *GLOBAL_IMAGE_REGISTRY
-      # -- Zookeeper image repository to use.
-      repository: bitnami/zookeeper
-      # -- Zookeeper image tag.
-      # Note: SigNoz ClickHouse does not support all versions of Zookeeper.
-      # Please override the default only if you know what you are doing.
-      tag: 3.7.1
-
-    # -- Replica count for zookeeper
-    replicaCount: 1
-
-    # -- Whether to install zookeeper into a different namespace than the parent
-    namespaceOverride: ""
-
-    # -- Resources requests and limits for zookeeper
-    resources:
-      limits: {}
-      requests:
-        memory: 256Mi
-        cpu: 100m
-
-  # -- Which namespace to install clickhouse and `clickhouse-operator` to (defaults to namespace chart is installed to)
-  namespace: ""
-  # -- Name override for clickhouse
-  nameOverride: ""
-  # -- Fullname override for clickhouse
-  fullnameOverride: ""
-
-  # -- Clickhouse cluster
-  cluster: cluster
-  # -- Clickhouse database (SigNoz Metrics)
-  database: signoz_metrics
-  # -- Clickhouse trace database (SigNoz Traces)
-  traceDatabase: signoz_traces
-  # -- Clickhouse user
-  user: admin
-  # -- Clickhouse password
-  password: 27ff0399-0d3a-4bd8-919d-17c2181e6fb9
-
-  # -- Clickhouse image
-  image:
-    # -- Clickhouse image registry to use.
-    registry: docker.io
-    # -- Clickhouse image repository to use.
-    repository: clickhouse/clickhouse-server
-    # -- Clickhouse image tag to use (example: `21.8`).
-    # SigNoz is not always tested with latest version of ClickHouse.
-    # Only if you know what you are doing, proceed with overriding.
-    tag: 24.1.2-alpine
-    # -- Clickhouse image pull policy.
-    pullPolicy: IfNotPresent
-
-  # -- Image Registry Secret Names for ClickHouse.
-  # If global.imagePullSecrets is set as well, it will merged.
-  imagePullSecrets: []
-    # - "clickhouse-pull-secret"
-
-  # -- ClickHouse instance annotations.
-  annotations: {}
-
-  # ClickHouse Service Account
-  serviceAccount:
-    # -- Specifies whether a service account should be created
-    create: true
-    # -- Annotations to add to the service account
-    annotations: {}
-    # -- The name of the service account to use.
-    # If not set and create is true, a name is generated using the fullname template
-    name:
-
-  # Clickhouse service
-  service:
-    # -- Annotations to use by service associated to Clickhouse instance
-    annotations: {}
-    # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-    type: ClusterIP
-    # -- Clickhouse HTTP port
-    httpPort: 8123
-    # -- Clickhouse TCP port
-    tcpPort: 9000
-
-  # -- Whether to use TLS connection connecting to ClickHouse
-  secure: false
-  # -- Whether to verify TLS certificate on connection to ClickHouse
-  verify: false
-  # -- URL for zookeeper.
-  externalZookeeper: {}
-    # servers:
-    # - host: signoz-signoz-zookeeper
-    #   port: 2181
-
-  # -- Node selector for settings for clickhouse pod
-  nodeSelector: {}
-  # -- Toleration labels for clickhouse pod assignment
-  tolerations: []
-  # -- Affinity settings for clickhouse pod
-  affinity: {}
-
-  # -- Configure resource requests and limits. Update according to your own use
-  # case as these values might not be suitable for your workload.
-  # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  #
-  # @default -- See `values.yaml` for defaults
-  resources:
-    requests:
-      cpu: 100m
-      memory: 200Mi
-  #   limits:
-  #     cpu: 2000m
-  #     memory: 4Gi
-
-  # -- Security context for Clickhouse node
-  securityContext:
-    enabled: true
-    runAsUser: 101
-    runAsGroup: 101
-    fsGroup: 101
-
-  # -- An allowlist of IP addresses or network masks the ClickHouse user is
-  # allowed to access from. By default anything within a private network will be
-  # allowed. This should suffice for most use case although to expose to other
-  # networks you will need to update this setting.
-  #
-  # Refs:
-  # - https://clickhouse.com/docs/en/operations/settings/settings-users/#user-namenetworks
-  # - https://en.wikipedia.org/wiki/Reserved_IP_addresses#IPv4
-  allowedNetworkIps:
-    - "10.0.0.0/8"
-    - "100.64.0.0/10"
-    - "172.16.0.0/12"
-    - "192.0.0.0/24"
-    - "198.18.0.0/15"
-    - "192.168.0.0/16"
-
-  persistence:
-    # -- Enable data persistence using PVC for ClickHouseDB data.
-    enabled: true
-
-    # -- Use a manually managed Persistent Volume and Claim.
-    # If defined, PVC must be created manually before volume will be bound.
-    # (only when deploying a single replica).
-    #
-    existingClaim: ""
-
-    # -- Persistent Volume Storage Class to use.
-    # If defined, `storageClassName: <storageClass>`.
-    # If set to "-", `storageClassName: ""`, which disables dynamic provisioning
-    # If undefined (the default) or set to `null`, no storageClassName spec is
-    # set, choosing the default provisioner.
-    #
-    storageClass: null
-
-    # -- Access Modes for persistent volume
-    accessModes:
-      - ReadWriteOnce
-
-    # -- Persistent Volume size
-    size: 20Gi
-
-  # -- Clickhouse user profile configuration.
-  # You can use this to override profile settings, for example
-  # `default/max_memory_usage: 40000000000` or `default/max_concurrent_queries: 200`
-  #
-  # For the full list of settings, see:
-  # - https://clickhouse.com/docs/en/operations/settings/settings-profiles/
-  # - https://clickhouse.com/docs/en/operations/settings/settings/
-  #
-  profiles: {}
-
-  # -- Default user profile configuration for Clickhouse. !!! Please DO NOT override this !!!
-  defaultProfiles:
-    default/allow_experimental_window_functions: "1"
-    default/allow_nondeterministic_mutations: "1"
-
-  # -- Clickhouse init container to copy histogramQuantile UDF
-  # @default -- See `values.yaml` for defaults
-  initContainers:
-    enabled: true
-    udf:
-      enabled: true
-      image:
-        registry: docker.io
-        repository: alpine
-        tag: 3.18.2
-        pullPolicy: IfNotPresent
-    init:
-      enabled: false
-      image:
-        registry: docker.io
-        repository: busybox
-        tag: 1.35
-        pullPolicy: IfNotPresent
-      command:
-        - /bin/sh
-        - -c
-        - |
-          set -e
-          until curl -s -o /dev/null http://signoz-clickhouse:8123/
-          do sleep 1
-          done
-
-  # -- Clickhouse cluster layout. (Experimental, use at own risk)
-  # For a full list of options, see https://github.com/Altinity/clickhouse-operator/blob/master/docs/custom_resource_explained.md
-  # section on clusters and layouts.
-  #
-  layout:
-    shardsCount: 1
-    replicasCount: 1
-
-  # -- ClickHouse settings configuration.
-  # You can use this to override settings, for example `prometheus/port: 9363`
-  # For the full list of settings, see:
-  # - https://clickhouse.com/docs/en/operations/settings/settings/
-  #
-  settings:
-    # Uncomment those lines if you want to enable the built-in Prometheus HTTP endpoint in ClickHouse.
-    prometheus/endpoint: /metrics
-    prometheus/port: 9363
-    # prometheus/metrics: true
-    # prometheus/events: true
-    # prometheus/asynchronous_metrics: true
-
-  # -- Default settings configuration for ClickHouse. !!! Please DO NOT override this !!!
-  defaultSettings:
-    format_schema_path: /etc/clickhouse-server/config.d/
-    user_scripts_path: /var/lib/clickhouse/user_scripts/
-    user_defined_executable_functions_config: '/etc/clickhouse-server/functions/custom-functions.xml'
-
-  # -- ClickHouse pod(s) annotation.
-  podAnnotations:
-    signoz.io/scrape: 'true'
-    signoz.io/port: '9363'
-    signoz.io/path: /metrics
-
-  # -- Topologies on how to distribute the ClickHouse pod.
-  # Possible values can be found here:
-  # - https://github.com/Altinity/clickhouse-operator/blob/1414503921da3ae475eb6f9a296d3475a6993768/docs/chi-examples/99-clickhouseinstallation-max.yaml#L428-L481
-  podDistribution: []
-    # - type: ShardAntiAffinity
-    #   topologyKey: kubernetes.io/hostname
-    # - type: ReplicaAntiAffinity
-    #   topologyKey: kubernetes.io/hostname
-    # - type: MaxNumberPerNode
-    #   number: 2
-    #   topologyKey: kubernetes.io/hostname
-
-  # Cold storage configuration
-  coldStorage:
-    # -- Whether to enable S3 cold storage
-    enabled: false
-    # -- Reserve free space on default disk (in bytes)
-    # Default value is 10MiB
-    defaultKeepFreeSpaceBytes: "10485760"
-    # -- Type of cold storage: s3 or gcs
-    type: s3
-    # -- Endpoint for S3 or GCS
-    # For S3, if region is us-east-1, endpoint can be https://s3.amazonaws.com
-    #         if region is not us-east-1, endpoint should be https://s3-<region>.amazonaws.com
-    # For GCS, endpoint should be https://storage.googleapis.com/<bucket-name>/data/
-    endpoint: https://<bucket-name>.s3-<region>.amazonaws.com/data/
-    # -- Access Key for S3 or GCS
-    accessKey: <access_key_id>
-    # -- Secret Access Key for S3 or GCS
-    secretAccess: <secret_access_key>
-    # AWS role configuration - to use environment variables instead of passing access and secret keys
-    role:
-      # -- Whether to enable AWS IAM ARN role.
-      enabled: false
-      # -- Annotations to use by service account associated to Clickhouse instance
-      annotations:
-        # aws role arn
-        eks.amazonaws.com/role-arn: arn:aws:iam::******:role/*****
-
-  # -- Clickhouse configuration files.
-  #
-  # Refs:
-  # - https://clickhouse.com/docs/en/operations/configuration-files/
-  # - https://github.com/Altinity/clickhouse-operator/blob/master/docs/chi-examples/05-settings-05-files-nested.yaml
-  files: {}
-    # config.d/log_rotation.xml: |
-    #   <clickhouse>
-    #     <logger>
-    #       <level>trace</level>
-    #       <console>true</console>
-    #       <errorlog>/var/log/clickhouse-server/clickhouse-server.err.log</errorlog>
-    #       <log>/var/log/clickhouse-server/clickhouse-server.log</log>
-    #       <size>100M</size>
-    #       <count>10</count>
-    #     </logger>
-    #   </clickhouse>
-    # test.xml: |
-    #   <clickhouse>
-    #     <some-setting>some-value</some-setting>
-    #   </clickhouse>
-
-  ###
-  ###
-  ### ---- MISC ----
-  ###
-  ###
-
-  # -- When the `installCustomStorageClass` is enabled with `cloud` set as `gcp` or `aws`,
-  # it creates custom storage class with volume expansion permission.
-  installCustomStorageClass: false
-
-  ###
-  ###
-  ### ---- CLICKHOUSE OPERATOR ----
-  ###
-  ###
-  clickhouseOperator:
-    # -- name of the component
-    name: operator
-
-    # -- Version of the operator
-    version: 0.21.2
-
-    # -- Clickhouse Operator image
-    image:
-      # -- Clickhouse Operator image registry to use.
-      registry: docker.io
-      # -- Clickhouse Operator image repository to use.
-      repository: altinity/clickhouse-operator
-      # -- Clickhouse Operator image tag.
-      tag: 0.21.2
-      # -- Clickhouse Operator image pull policy.
-      pullPolicy: IfNotPresent
-
-    # -- Image Registry Secret Names for Clickhouse Operator.
-    # If global.imagePullSecrets is set as well, it will merged.
-    imagePullSecrets: []
-      # - "clickhouseOperator-pull-secret"
-
-    # ClickHouse Operator Service Account
-    serviceAccount:
-      # -- Specifies whether a service account should be created
-      create: true
-      # -- Annotations to add to the service account
-      annotations: {}
-      # -- The name of the service account to use.
-      # If not set and create is true, a name is generated using the fullname template
-      name:
-
-    # Clickhouse logging config
-    logger:
-      # -- Logging level. Acceptable values: trace, debug, information, warning, error.
-      level: information
-      # -- Size of the file. Applies to log and errorlog. Once the file reaches size,
-      # ClickHouse archives and renames it, and creates a new log file in its place.
-      size: 1000M
-      # -- The number of archived log files that ClickHouse stores.
-      count: 10
-      # -- Whether to send log and errorlog to the console instead of file. To enable, set to 1 or true.
-      console: 1
-
-    # Query Log table configuration
-    queryLog:
-      # -- The number of days to keep the data in the query_log table.
-      ttl: 30
-      # -- Time interval in milliseconds between flushes of the query_log table.
-      flushInterval: 7500
-    # Part Log table configuration
-    partLog:
-      # -- The number of days to keep the data in the part_log table.
-      ttl: 30
-      # -- Time interval in milliseconds between flushes of the part_log table.
-      flushInterval: 7500
-    # Trace Log table configuration
-    traceLog:
-      # -- The number of days to keep the data in the trace_log table.
-      ttl: 7
-      # -- Time interval in milliseconds between flushes of the trace_log table.
-      flushInterval: 7500
-
-    asynchronousInsertLog:
-      # -- The number of days to keep the data in the asynchronous_insert_log table.
-      ttl: 7
-      # -- Time interval in milliseconds between flushes of the asynchronous_insert_log table.
-      flushInterval: 7500
-    asynchronousMetricLog:
-      # -- The number of days to keep the data in the asynchronous_metric_log table.
-      ttl: 30
-      # -- Time interval in milliseconds between flushes of the asynchronous_metric_log table.
-      flushInterval: 7500
-    backupLog:
-      # -- The number of days to keep the data in the backup_log table.
-      ttl: 7
-      # -- Time interval in milliseconds between flushes of the backup_log table.
-      flushInterval: 7500
-    blobStorageLog:
-      # -- The number of days to keep the data in the blob_storage_log table.
-      ttl: 30
-      # -- Time interval in milliseconds between flushes of the blob_storage_log table.
-      flushInterval: 7500
-    crashLog:
-      # -- The number of days to keep the data in the crash_log table.
-      ttl: 30
-      # -- Time interval in milliseconds between flushes of the crash_log table.
-      flushInterval: 7500
-    metricLog:
-      # -- The number of days to keep the data in the metric_log table.
-      ttl: 30
-      # -- Time interval in milliseconds between flushes of the metric_log table.
-      flushInterval: 7500
-    queryThreadLog:
-      # -- The number of days to keep the data in the query_thread_log table.
-      ttl: 7
-      # -- Time interval in milliseconds between flushes of the query_thread_log table.
-      flushInterval: 7500
-    queryViewsLog:
-      # -- The number of days to keep the data in the query_views_log table.
-      ttl: 15
-      # -- Time interval in milliseconds between flushes of the query_views_log table.
-      flushInterval: 7500
-    sessionLog:
-      # -- The number of days to keep the data in the session_log table.
-      ttl: 30
-      # -- Time interval in milliseconds between flushes of the session_log table.
-      flushInterval: 7500
-    zookeeperLog:
-      # -- The number of days to keep the data in the zookeeper_log table.
-      ttl: 30
-      # -- Time interval in milliseconds between flushes of the zookeeper_log table.
-      flushInterval: 7500
-    processorsProfileLog:
-      # -- The number of days to keep the data in the processors_profile_log table.
-      ttl: 7
-      # -- Time interval in milliseconds between flushes of the processors_profile_log table.
-      flushInterval: 7500
-
-    # -- Clickhouse Operator pod(s) annotation.
-    podAnnotations:
-      signoz.io/port: '8888'
-      signoz.io/scrape: 'true'
-
-    # -- Clickhouse Operator node selector
-    nodeSelector: {}
-
-    # -- Metrics Exporter config.
-    metricsExporter:
-      # -- name of the component
-      name: metrics-exporter
-
-      # -- Metrics Exporter service
-      service:
-        # -- Annotations to use by service associated to Metrics Exporter
-        annotations: {}
-        # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-        type: ClusterIP
-        # -- Metrics Exporter port
-        port: 8888
-
-      # -- Metrics Exporter image
-      image:
-        # -- Metrics Exporter image registry to use.
-        registry: docker.io
-        # -- Metrics Exporter image repository to use.
-        repository: altinity/metrics-exporter
-        # -- Metrics Exporter image tag.
-        tag: 0.21.2
-        # -- Metrics Exporter image pull policy.
-        pullPolicy: IfNotPresent
-
-
-## External clickhouse configuration
-## This is required when clickhouse.enabled is false
-##
-externalClickhouse:
-  # -- Host of the external cluster.
-  host:
-  # -- Name of the external cluster to run DDL queries on.
-  cluster: cluster
-  # -- Database name for the external cluster
-  database: signoz_metrics
-  # -- Clickhouse trace database (SigNoz Traces)
-  traceDatabase: signoz_traces
-  # -- User name for the external cluster to connect to the external cluster as
-  user: ""
-  # -- Password for the cluster. Ignored if externalClickhouse.existingSecret is set
-  password: ""
-  # -- Name of an existing Kubernetes secret object containing the password
-  existingSecret:
-  # -- Name of the key pointing to the password in your Kubernetes secret
-  existingSecretPasswordKey:
-  # -- Whether to use TLS connection connecting to ClickHouse
-  secure: false
-  # -- Whether to verify TLS connection connecting to ClickHouse
-  verify: false
-  # -- HTTP port of Clickhouse
-  httpPort: 8123
-  # -- TCP port of Clickhouse
-  tcpPort: 9000
-
-# Default values for query-service
-queryService:
-  name: "query-service"
-  replicaCount: 1
-  image:
-    registry: docker.io
-    repository: signoz/query-service
-    tag: 0.40.0
-    pullPolicy: IfNotPresent
-
-  # -- Image Registry Secret Names for Query-Service
-  # If set, this has higher precedence than the root level or global value of imagePullSecrets.
-  imagePullSecrets: []
-
-  # Query-Service Service Account
-  serviceAccount:
-    # Specifies whether a service account should be created
-    create: true
-    # Annotations to add to the service account
-    annotations: {}
-    # The name of the service account to use.
-    # If not set and create is true, a name is generated using the fullname template
-    name:
-
-  # Query-Service service
-  service:
-    # -- Annotations to use by service associated to Query-Service
-    annotations: {}
-    # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-    type: ClusterIP
-    # -- Query-Service HTTP port
-    port: 8080
-    # -- Query-Service Internal port
-    internalPort: 8085
-    # -- Query-Service OpAMP Internal port
-    opampPort: 4320
-    # -- Set this to you want to force a specific nodePort for http.
-    # Must be use with service.type=NodePort
-    nodePort: null
-    # -- Set this to you want to force a specific nodePort for internal.
-    # Must be use with service.type=NodePort
-    internalNodePort: null
-
-  # -- Query-Service annotations
-  annotations:
-    "helm.sh/hook-weight": "2"
-
-  # -- Query-Service additional arguments for command line
-  additionalArgs: []
-    # - --prefer-delta=true
-
-  # -- Additional environments to set for queryService
-  additionalEnvs: {}
-    # env_key: env_value
-
-  initContainers:
-    init:
-      enabled: true
-      image:
-        registry: docker.io
-        repository: busybox
-        tag: 1.35
-        pullPolicy: IfNotPresent
-      command:
-        delay: 5
-        endpoint: /ping
-        waitMessage: "waiting for clickhouseDB"
-        doneMessage: "clickhouse ready, starting query service now"
-      resources: {}
-        # requests:
-        #   cpu: 100m
-        #   memory: 100Mi
-        # limits:
-        #   cpu: 100m
-        #   memory: 100Mi
-    migration:
-      enabled: false
-      image:
-        registry: docker.io
-        repository: busybox
-        tag: 1.35
-        pullPolicy: IfNotPresent
-      args: []
-      command: []
-        # - sh
-        # - -c
-        # - |
-        #   echo "Running migration"
-        #   sleep 10  # Replace with actual migration command
-        #   echo "Migration completed"
-      resources: {}
-        # requests:
-        #   cpu: 100m
-        #   memory: 100Mi
-        # limits:
-        #   cpu: 100m
-        #   memory: 100Mi
-
-  configVars:
-    storage: clickhouse
-    # ClickHouse URL is set and applied internally.
-    # Don't override unless you know what you are doing.
-    # clickHouseUrl: tcp://my-release-clickhouse:9000/?database=signoz_traces&username=clickhouse_operator&password=clickhouse_operator_password
-    goDebug: netdns=go
-    telemetryEnabled: true
-    deploymentType: kubernetes-helm
-
-  # Query-Service cache options
-  cache:
-    # -- Whether to enable cache for Query-Service
-    enabled: false
-    # -- Cache flux interval for Query-Service
-    fluxInterval: 30m
-    # -- Cache configurations for Query-Service
-    config:
-      name: cache
-      provider: inmemory
-      inmemory:
-        ttl: 24h
-
-  podSecurityContext: {}
-    # fsGroup: 2000
-
-  securityContext: {}
-    # capabilities:
-    #   drop:
-    #   - ALL
-    # readOnlyRootFilesystem: true
-    # runAsNonRoot: true
-    # runAsUser: 1000
-
-  # -- Configure liveness and readiness probes.
-  # ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
-  livenessProbe:
-    enabled: true
-    port: http
-    path: /api/v1/health
-    initialDelaySeconds: 5
-    periodSeconds: 10
-    timeoutSeconds: 5
-    failureThreshold: 6
-    successThreshold: 1
-  readinessProbe:
-    enabled: true
-    port: http
-    path: /api/v1/health?live=1
-    initialDelaySeconds: 5
-    periodSeconds: 10
-    timeoutSeconds: 5
-    failureThreshold: 6
-    successThreshold: 1
-
-  # -- Custom liveness probe
-  customLivenessProbe: {}
-  # -- Custom readiness probe
-  customReadinessProbe: {}
-
-  ingress:
-    # -- Enable ingress for Query-Service
-    enabled: false
-    # -- Ingress Class Name to be used to identify ingress controllers
-    className: ""
-    # -- Annotations to Query-Service Ingress
-    annotations: {}
-      # kubernetes.io/ingress.class: nginx
-      # kubernetes.io/tls-acme: "true"
-      # cert-manager.io/cluster-issuer: letsencrypt-prod
-    # -- Query-Service Ingress Host names with their path details
-    hosts:
-      - host: query-service.domain.com
-        paths:
-          - path: /
-            pathType: ImplementationSpecific
-            port: 8080
-    # -- Query-Service Ingress TLS
-    tls: []
-    #  - secretName: chart-example-tls
-    #    hosts:
-    #      - query-service.domain.com
-
-  # -- Configure resource requests and limits. Update according to your own use
-  # case as these values might not be suitable for your workload.
-  # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  #
-  # @default -- See `values.yaml` for defaults
-  resources:
-    requests:
-      cpu: 100m
-      memory: 100Mi
-    # limits:
-    #   cpu: 750m
-    #   memory: 1000Mi
-
-  # -- QueryService priority class name
-  priorityClassName: ""
-  # -- Node selector for settings for QueryService pod
-  nodeSelector: {}
-  # -- Toleration labels for QueryService pod assignment
-  tolerations: []
-  # -- Affinity settings for QueryService pod
-  affinity: {}
-  # -- TopologySpreadConstraints describes how QueryService pods ought to spread
-  topologySpreadConstraints: []
-
-  persistence:
-    # -- Enable data persistence using PVC for SQLiteDB data.
-    enabled: true
-
-    # -- Name of an existing PVC to use (only when deploying a single replica)
-    existingClaim: ""
-
-    # -- Persistent Volume Storage Class to use.
-    # If defined, `storageClassName: <storageClass>`.
-    # If set to "-", `storageClassName: ""`, which disables dynamic provisioning
-    # If undefined (the default) or set to `null`, no storageClassName spec is
-    # set, choosing the default provisioner.
-    #
-    storageClass: null
-
-    # -- Access Modes for persistent volume
-    accessModes:
-      - ReadWriteOnce
-
-    # -- Persistent Volume size
-    size: 1Gi
-
-
-# Default values for frontend
-frontend:
-  name: "frontend"
-  replicaCount: 1
-
-  image:
-    registry: docker.io
-    repository: signoz/frontend
-    tag: 0.40.0
-    pullPolicy: IfNotPresent
-
-  # -- Image Registry Secret Names for Frontend
-  # If set, this has higher precedence than the root level or global value of imagePullSecrets.
-  imagePullSecrets: []
-
-  # Frontend Service Account
-  serviceAccount:
-    # Specifies whether a service account should be created
-    create: true
-    # Annotations to add to the service account
-    annotations: {}
-    # The name of the service account to use.
-    # If not set and create is true, a name is generated using the fullname template
-    name:
-
-  # Frontend service
-  service:
-    # -- Annotations to use by service associated to Frontend
-    annotations: {}
-    # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-    type: ClusterIP
-    # -- Frontend HTTP port
-    port: 3301
-
-  initContainers:
-    init:
-      enabled: true
-      image:
-        registry: docker.io
-        repository: busybox
-        tag: 1.35
-        pullPolicy: IfNotPresent
-      command:
-        delay: 5
-        endpoint: /api/v1/health?live=1
-        waitMessage: "waiting for query-service"
-        doneMessage: "query-service ready, starting frontend now"
-      resources: {}
-        # requests:
-        #   cpu: 100m
-        #   memory: 100Mi
-        # limits:
-        #   cpu: 100m
-        #   memory: 100Mi
-
-  autoscaling:
-    enabled: false
-    minReplicas: 1
-    maxReplicas: 11
-    targetCPUUtilizationPercentage: 50
-    targetMemoryUtilizationPercentage: 50
-    behavior: {}
-      # scaleDown:
-      #   stabilizationWindowSeconds: 300
-      #  policies:
-      #   - type: Pods
-      #     value: 1
-      #     periodSeconds: 180
-      # scaleUp:
-      #   stabilizationWindowSeconds: 300
-      #   policies:
-      #   - type: Pods
-      #     value: 2
-      #     periodSeconds: 60
-
-    autoscalingTemplate: []
-    keda:
-      enabled: false
-      pollingInterval: "30"   # check 30sec periodically for metrics data
-      cooldownPeriod: "300"   # once the load decreased, it will wait for 5 min and downscale
-      minReplicaCount: "1"    # should be >= replicaCount specified in values.yaml
-      maxReplicaCount: "5"
-      triggers:
-        - type: memory
-          metadata:
-            type: Utilization
-            value: "80"   # hpa make sure average Utilization <=80 by adding new pods
-        - type: cpu
-          metadata:
-            type: Utilization
-            value: "80"   # hpa make sure average Utlization <=80 by adding new pods
-
-  configVars: {}
-
-  # -- Frontend deployment annotations
-  annotations:
-    "helm.sh/hook-weight": "5"
-  # -- Frontend pod security context
-  podSecurityContext: {}
-    # fsGroup: 2000
-
-  securityContext: {}
-    # capabilities:
-    #   drop:
-    #   - ALL
-    # readOnlyRootFilesystem: true
-    # runAsNonRoot: true
-    # runAsUser: 1000
-
-  ingress:
-    # -- Enable ingress for Frontend
-    enabled: false
-    # -- Ingress Class Name to be used to identify ingress controllers
-    className: ""
-    # -- Annotations to Frontend Ingress
-    annotations: {}
-      # kubernetes.io/ingress.class: nginx
-      # kubernetes.io/tls-acme: "true"
-      # cert-manager.io/cluster-issuer: letsencrypt-prod
-    # -- Frontend Ingress Host names with their path details
-    hosts:
-      - host: frontend.domain.com
-        paths:
-          - path: /
-            pathType: ImplementationSpecific
-            port: 3301
-    # -- Frontend Ingress TLS
-    tls: []
-    #  - secretName: chart-example-tls
-    #    hosts:
-    #      - frontend.domain.com
-
-  # -- Frontend Nginx extra configurations
-  nginxExtraConfig: |
-      client_max_body_size 24M;
-      large_client_header_buffers 8 16k;
-
-  # -- Configure resource requests and limits. Update according to your own use
-  # case as these values might not be suitable for your workload.
-  # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  #
-  # @default -- See `values.yaml` for defaults
-  resources:
-    requests:
-      cpu: 100m
-      memory: 100Mi
-    # limits:
-    #   cpu: 200m
-    #   memory: 200Mi
-
-  # -- Frontend priority class name
-  priorityClassName: ""
-  # -- Node selector for settings for Frontend pod
-  nodeSelector: {}
-  # -- Toleration labels for Frontend pod assignment
-  tolerations: []
-  # -- Affinity settings for Frontend pod
-  affinity: {}
-  # -- TopologySpreadConstraints describes how Frontend pods ought to spread
-  topologySpreadConstraints: []
-
-# Default values for Alertmanager
-alertmanager:
-  enabled: true
-  name: "alertmanager"
-  replicaCount: 1
-
-  image:
-    registry: docker.io
-    repository: signoz/alertmanager
-    pullPolicy: IfNotPresent
-    # Overrides the image tag whose default is the chart appVersion.
-    tag: 0.23.4
-
-  # -- Image Registry Secret Names for Alertmanager
-  # If set, this has higher precedence than the root level or global value of imagePullSecrets.
-  imagePullSecrets: []
-
-  # -- Alertmanager custom command override
-  command: []
-  # -- Alertmanager extra Arguments
-  extraArgs: {}
-
-  # Alertmanager Service Account
-  serviceAccount:
-    # Specifies whether a service account should be created
-    create: true
-    # Annotations to add to the service account
-    annotations: {}
-    # The name of the service account to use.
-    # If not set and create is true, a name is generated using the fullname template
-    name:
-
-  # Alertmanager service
-  service:
-    # -- Annotations to use by service associated to Alertmanager
-    annotations: {}
-    # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-    type: ClusterIP
-    # -- Alertmanager HTTP port
-    port: 9093
-    # -- Alertmanager cluster port
-    clusterPort: 9094
-    # -- Set this to you want to force a specific nodePort. Must be use with service.type=NodePort
-    nodePort: null
-
-  initContainers:
-    init:
-      enabled: true
-      image:
-        registry: docker.io
-        repository: busybox
-        tag: 1.35
-        pullPolicy: IfNotPresent
-      command:
-        delay: 5
-        endpoint: /api/v1/health?live=1
-        waitMessage: "waiting for query-service"
-        doneMessage: "query-service ready, starting alertmanager now"
-      resources: {}
-        # requests:
-        #   cpu: 100m
-        #   memory: 100Mi
-        # limits:
-        #   cpu: 100m
-        #   memory: 100Mi
-
-  podSecurityContext:
-    fsGroup: 65534
-  dnsConfig: {}
-    # nameservers:
-    #   - 1.2.3.4
-    # searches:
-    #   - ns1.svc.cluster-domain.example
-    #   - my.dns.search.suffix
-    # options:
-    #   - name: ndots
-    #     value: "2"
-    #   - name: edns0
-  securityContext:
-    # capabilities:
-    #   drop:
-    #   - ALL
-    # readOnlyRootFilesystem: true
-    runAsUser: 65534
-    runAsNonRoot: true
-    runAsGroup: 65534
-
-  additionalPeers: []
-
-  livenessProbe:
-    httpGet:
-      path: /
-      port: http
-
-  readinessProbe:
-    httpGet:
-      path: /
-      port: http
-
-  ingress:
-    # -- Enable ingress for Alertmanager
-    enabled: false
-    # -- Ingress Class Name to be used to identify ingress controllers
-    className: ""
-    # -- Annotations to Alertmanager Ingress
-    annotations: {}
-      # kubernetes.io/ingress.class: nginx
-      # kubernetes.io/tls-acme: "true"
-      # cert-manager.io/cluster-issuer: letsencrypt-prod
-    # -- Alertmanager Ingress Host names with their path details
-    hosts:
-      - host: alertmanager.domain.com
-        paths:
-          - path: /
-            pathType: ImplementationSpecific
-            port: 9093
-    # -- Alertmanager Ingress TLS
-    tls: []
-    #  - secretName: chart-example-tls
-    #    hosts:
-    #      - alertmanager.domain.com
-
-  # -- Configure resource requests and limits. Update according to your own use
-  # case as these values might not be suitable for your workload.
-  # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  #
-  # @default -- See `values.yaml` for defaults
-  resources:
-    requests:
-      cpu: 100m
-      memory: 100Mi
-    # limits:
-    #   cpu: 200m
-    #   memory: 200Mi
-
-  # -- Alertmanager priority class name
-  priorityClassName: ""
-  # -- Node selector for settings for Alertmanager pod
-  nodeSelector: {}
-  # -- Toleration labels for Alertmanager pod assignment
-  tolerations: []
-  # -- Affinity settings for Alertmanager pod
-  affinity: {}
-  # -- TopologySpreadConstraints describes how Alertmanager pods ought to spread
-  topologySpreadConstraints: []
-
-  statefulSet:
-    annotations:
-      "helm.sh/hook-weight": "4"
-
-  podAnnotations: {}
-  podLabels: {}
-
-  # Ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
-  podDisruptionBudget: {}
-    # maxUnavailable: 1
-    # minAvailable: 1
-
-  persistence:
-    # -- Enable data persistence using PVC for Alertmanager data.
-    enabled: true
-
-    # -- Name of an existing PVC to use (only when deploying a single replica)
-    existingClaim: ""
-
-    # -- Persistent Volume Storage Class to use.
-    # If defined, `storageClassName: <storageClass>`.
-    # If set to "-", `storageClassName: ""`, which disables dynamic provisioning
-    # If undefined (the default) or set to `null`, no storageClassName spec is
-    # set, choosing the default provisioner.
-    #
-    storageClass: null
-
-    # -- Access Modes for persistent volume
-    accessModes:
-      - ReadWriteOnce
-
-    # -- Persistent Volume size
-    size: 100Mi
-
-  ## Using the config, alertmanager.yml file is created.
-  ## We no longer need the config file as query services
-  ## delivers the required config.
-  # config:
-  # global:
-  #   resolve_timeout: 1m
-  #   slack_api_url: 'https://hooks.slack.com/services/xxx'
-
-  # templates:
-  #   - '/etc/alertmanager/*.tmpl'
-
-  # receivers:
-  # - name: 'slack-notifications'
-  #   slack_configs:
-  #   - channel: '#alerts'
-  #     send_resolved: true
-  #     icon_url: https://avatars3.githubusercontent.com/u/3380462
-  #     title: '{{ template "slack.title" . }}'
-  #     text: '{{ template "slack.text" . }}'
-
-  # route:
-  #   receiver: 'slack-notifications'
-
-  ## Templates are no longer needed as they are included
-  ## from frontend placeholder while creating alert channels.
-  # templates:
-  #   title.tmpl: |-
-  #       {{ define "slack.title" }}
-  #       [{{ .Status | toUpper }}{{ if eq .Status "firing" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}
-  #       {{- if gt (len .CommonLabels) (len .GroupLabels) -}}
-  #         {{" "}}(
-  #         {{- with .CommonLabels.Remove .GroupLabels.Names }}
-  #           {{- range $index, $label := .SortedPairs -}}
-  #             {{ if $index }}, {{ end }}
-  #             {{- $label.Name }}="{{ $label.Value -}}"
-  #           {{- end }}
-  #         {{- end -}}
-  #         )
-  #       {{- end }}
-  #       {{ end }}
-  #   text.tmpl: |-
-  #       {{ define "slack.text" }}
-  #       {{ range .Alerts -}}
-  #       *Alert:* {{ .Labels.alertname }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}
-
-  #       *Summary:* {{ .Annotations.summary }}
-  #       *Description:* {{ .Annotations.description }}
-
-  #       *Details:*
-  #         {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`
-  #         {{ end }}
-  #       {{ end }}
-  #       {{ end }}
-
-  ## Monitors ConfigMap changes and POSTs to a URL
-  ## Ref: https://github.com/jimmidyson/configmap-reload
-  ##
-  configmapReload:
-    ## If false, the configmap-reload container will not be deployed
-    ##
-    enabled: false
-
-    ## configmap-reload container name
-    ##
-    name: configmap-reload
-
-    ## configmap-reload container image
-    ##
-    image:
-      repository: jimmidyson/configmap-reload
-      tag: v0.5.0
-      pullPolicy: IfNotPresent
-
-    # containerPort: 9533
-
-    # -- Configure resource requests and limits. Update as per your need.
-    # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-    #
-    # @default -- See `values.yaml` for defaults
-    resources:
-      requests:
-        cpu: 100m
-        memory: 100Mi
-      # limits:
-      #   cpu: 200m
-      #   memory: 200Mi
-
-# Default values for schemaMigrator
-schemaMigrator:
-  enabled: true
-  name: "schema-migrator"
-
-  image:
-    registry: docker.io
-    repository: signoz/signoz-schema-migrator
-    tag: 0.88.14
-    pullPolicy: IfNotPresent
-
-  args: {}
-  annotations:
-    "helm.sh/hook-weight": "1"
-    "helm.sh/hook-delete-policy": "before-hook-creation"
-
-  initContainers:
-    wait:
-      image:
-        registry: docker.io
-        repository: groundnuty/k8s-wait-for
-        tag: v2.0
-        pullPolicy: IfNotPresent
-    init:
-      enabled: true
-      image:
-        registry: docker.io
-        repository: busybox
-        tag: 1.35
-        pullPolicy: IfNotPresent
-      command:
-        delay: 5
-        endpoint: /ping
-        waitMessage: "waiting for clickhouseDB"
-        doneMessage: "clickhouse ready, starting schema migrator now"
-      resources: {}
-        # requests:
-        #   cpu: 100m
-        #   memory: 100Mi
-        # limits:
-        #   cpu: 100m
-        #   memory: 100Mi
-    chReady:
-      enabled: true
-      image:
-        registry: docker.io
-        repository: clickhouse/clickhouse-server
-        tag: 24.1.2-alpine
-        pullPolicy: IfNotPresent
-      command:
-        - "sh"
-        - "-c"
-        - |
-          echo "Running clickhouse ready check"
-          while true
-          do
-            version="$(CLICKHOUSE_VERSION)"
-            shards="$(CLICKHOUSE_SHARDS)"
-            current_version="$(clickhouse client --host ${CLICKHOUSE_HOST} --port ${CLICKHOUSE_PORT} --user "${CLICKHOUSE_USER}" --password "${CLICKHOUSE_PASSWORD}" -q "SELECT version()")"
-            if [ -z "$current_version" ]; then
-              echo "waiting for clickhouse to be ready"
-              sleep 5
-              continue
-            fi
-            if [ -z "$(echo "$current_version" | grep "$version")" ]; then
-              echo "expected version: $version, current version: $current_version"
-              echo "waiting for clickhouse with correct version"
-              sleep 5
-              continue
-            fi
-            current_shards="$(clickhouse client --host ${CLICKHOUSE_HOST} --port ${CLICKHOUSE_PORT} --user "${CLICKHOUSE_USER}" --password "${CLICKHOUSE_PASSWORD}" -q "SELECT count() FROM system.clusters WHERE cluster = '${CLICKHOUSE_CLUSTER}'")"
-            if [ -z "$current_shards" ]; then
-              echo "waiting for clickhouse to be ready"
-              sleep 5
-              continue
-            fi
-            if [ "$current_shards" -ne "$shards" ]; then
-              echo "expected shard count: $shards, current shard count: $current_shards"
-              echo "waiting for clickhouse with correct shard count"
-              sleep 5
-              continue
-            fi
-            break
-          done
-          echo "clickhouse ready, starting schema migrator now"
-      resources: {}
-        # requests:
-        #   cpu: 100m
-        #   memory: 100Mi
-        # limits:
-        #   cpu: 100m
-        #   memory: 100Mi
-
-# Default values for OtelCollector
-otelCollector:
-  name: "otel-collector"
-  image:
-    registry: docker.io
-    repository: signoz/signoz-otel-collector
-    tag: 0.88.14
-    pullPolicy: IfNotPresent
-
-  # -- Image Registry Secret Names for OtelCollector
-  # If set, this has higher precedence than the root level or global value of imagePullSecrets.
-  imagePullSecrets: []
-
-  initContainers:
-    init:
-      enabled: false
-      image:
-        registry: docker.io
-        repository: busybox
-        tag: 1.35
-        pullPolicy: IfNotPresent
-      command:
-        delay: 5
-        endpoint: /ping
-        waitMessage: "waiting for clickhouseDB"
-        doneMessage: "clickhouse ready, starting otel collector now"
-      resources: {}
-        # requests:
-        #   cpu: 100m
-        #   memory: 100Mi
-        # limits:
-        #   cpu: 100m
-        #   memory: 100Mi
-
-  # OpenTelemetry Collector executable
-  command:
-    # -- OtelCollector command name
-    name: /signoz-collector
-    # -- OtelCollector command extra arguments
-    extraArgs:
-      - --feature-gates=-pkg.translator.prometheus.NormalizeName
-
-  configMap:
-    # -- Specifies whether a configMap should be created (true by default)
-    create: true
-
-  # OtelCollector Service Account
-  serviceAccount:
-    # Specifies whether a service account should be created
-    create: true
-    # Annotations to add to the service account
-    annotations: {}
-    # The name of the service account to use.
-    # If not set and create is true, a name is generated using the fullname template
-    name:
-
-  # OtelCollector service
-  service:
-    # -- Annotations to use by service associated to OtelCollector
-    annotations: {}
-    # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-    type: ClusterIP
-
-  # -- OtelCollector Deployment annotation.
-  annotations:
-    "helm.sh/hook-weight": "3"
-  # -- OtelCollector pod(s) annotation.
-  podAnnotations:
-    signoz.io/scrape: 'true'
-    signoz.io/port: '8888'
-
-  # -- OtelCollector pod(s) labels.
-  podLabels: {}
-
-  # -- Additional environments to set for OtelCollector
-  additionalEnvs: {}
-    # env_key: env_value
-
-  # -- Whether to enable grouping of exceptions with same name and different stack trace.
-  # This is useful when you have a lot of exceptions with same name but different stack trace.
-  # This is a tradeoff between cardinality and accuracy of exception grouping.
-  lowCardinalityExceptionGrouping: false
-
-  minReadySeconds: 5
-  progressDeadlineSeconds: 120
-  replicaCount: 1
-
-  # OtelCollector RBAC config
-  clusterRole:
-    # -- Specifies whether a clusterRole should be created
-    create: true
-    # -- Annotations to add to the clusterRole
-    annotations: {}
-    # -- The name of the clusterRole to use.
-    # If not set and create is true, a name is generated using the fullname template
-    name: ""
-    # -- A set of rules as documented here.
-    # ref: https://kubernetes.io/docs/reference/access-authn-authz/rbac/
-    # @default -- See `values.yaml` for defaults
-    rules:
-      # k8sattributes processor requires these permissions
-      - apiGroups: [""]
-        resources: ["pods", "namespaces", "nodes"]
-        verbs: ["get", "list", "watch"]
-      - apiGroups: ["apps"]
-        resources: ["replicasets"]
-        verbs: ["get", "list", "watch"]
-      - apiGroups: ["extensions"]
-        resources: ["replicasets"]
-        verbs: ["get", "list", "watch"]
-      - apiGroups: ["batch"]
-        resources: ["jobs"]
-        verbs: ["get", "list", "watch"]
-
-    # OtelCollector clusterRoleBinding
-    clusterRoleBinding:
-      # Annotations to add to the clusterRoleBinding
-      annotations: {}
-      # The name of the clusterRoleBinding to use.
-      # If not set and create is true, a name is generated using the fullname template
-      name: ""
-
-  # Configuration for ports
-  ports:
-    otlp:
-      # -- Whether to enable service port for OTLP gRPC
-      enabled: true
-      # -- Container port for OTLP gRPC
-      containerPort: 4317
-      # -- Service port for OTLP gRPC
-      servicePort: 4317
-      # -- Node port for OTLP gRPC
-      nodePort: ""
-      # -- Protocol to use for OTLP gRPC
-      protocol: TCP
-    otlp-http:
-      # -- Whether to enable service port for OTLP HTTP
-      enabled: true
-      # -- Container port for OTLP HTTP
-      containerPort: 4318
-      # -- Service port for OTLP HTTP
-      servicePort: 4318
-      # -- Node port for OTLP HTTP
-      nodePort: ""
-      # -- Protocol to use for OTLP HTTP
-      protocol: TCP
-    jaeger-compact:
-      # -- Whether to enable service port for Jaeger Compact
-      enabled: false
-      # -- Container port for Jaeger Compact
-      containerPort: 6831
-      # -- Service port for Jaeger Compact
-      servicePort: 6831
-      # -- Node port for Jaeger Compact
-      nodePort: ""
-      # -- Protocol to use for Jaeger Compact
-      protocol: UDP
-    jaeger-thrift:
-      # -- Whether to enable service port for Jaeger Thrift HTTP
-      enabled: true
-      # -- Container port for Jaeger Thrift
-      containerPort: 14268
-      # -- Service port for Jaeger Thrift
-      servicePort: 14268
-      # -- Node port for Jaeger Thrift
-      nodePort: ""
-      # -- Protocol to use for Jaeger Thrift
-      protocol: TCP
-    jaeger-grpc:
-      # -- Whether to enable service port for Jaeger gRPC
-      enabled: true
-      # -- Container port for Jaeger gRPC
-      containerPort: 14250
-      # -- Service port for Jaeger gRPC
-      servicePort: 14250
-      # -- Node port for Jaeger gRPC
-      nodePort: ""
-      # -- Protocol to use for Jaeger gRPC
-      protocol: TCP
-    zipkin:
-      # -- Whether to enable service port for Zipkin
-      enabled: false
-      # -- Container port for Zipkin
-      containerPort: 9411
-      # -- Service port for Zipkin
-      servicePort: 9411
-      # -- Node port for Zipkin
-      nodePort: ""
-      # -- Protocol to use for Zipkin
-      protocol: TCP
-    prometheus:
-      # -- Whether to enable service port for SigNoz exported prometheus metrics
-      enabled: false
-      # -- Container port for SigNoz exported prometheus metrics
-      containerPort: 8889
-      # -- Service port for SigNoz exported prometheus metrics
-      servicePort: 8889
-      # -- Node port for SigNoz exported prometheus metrics
-      nodePort: ""
-      # -- Protocol to use for SigNoz exported prometheus metrics
-      protocol: TCP
-    metrics:
-      # -- Whether to enable service port for internal metrics
-      enabled: true
-      # -- Container port for internal metrics
-      containerPort: 8888
-      # -- Service port for internal metrics
-      servicePort: 8888
-      # -- Node port for internal metrics
-      nodePort: ""
-      # -- Protocol to use for internal metrics
-      protocol: TCP
-    zpages:
-      # -- Whether to enable service port for ZPages
-      enabled: false
-      # -- Container port for Zpages
-      containerPort: 55679
-      # -- Service port for Zpages
-      servicePort: 55679
-      # -- Node port for Zpages
-      nodePort: ""
-      # -- Protocol to use for Zpages
-      protocol: TCP
-    pprof:
-      # -- Whether to enable service port for pprof
-      enabled: false
-      # -- Container port for pprof
-      containerPort: 1777
-      # -- Service port for pprof
-      servicePort: 1777
-      # -- Node port for pprof
-      nodePort: ""
-      # -- Protocol to use for pprof
-      protocol: TCP
-    logsheroku:
-      # -- Whether to enable service port for logsheroku
-      enabled: true
-      # -- Container port for logsheroku
-      containerPort: 8081
-      # -- Service port for logsheroku
-      servicePort: 8081
-      # -- Node port for logsheroku
-      nodePort: ""
-      # -- Protocol to use for logsheroku
-      protocol: TCP
-    logsjson:
-      # -- Whether to enable service port for logsjson
-      enabled: true
-      # -- Container port for logsjson
-      containerPort: 8082
-      # -- Service port for logsjson
-      servicePort: 8082
-      # -- Node port for logsjson
-      nodePort: ""
-      # -- Protocol to use for logsjson
-      protocol: TCP
-
-  # -- Configure liveness and readiness probes.
-  # ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
-  livenessProbe:
-    enabled: true
-    port: 13133
-    path: /
-    initialDelaySeconds: 5
-    periodSeconds: 10
-    timeoutSeconds: 5
-    failureThreshold: 6
-    successThreshold: 1
-  readinessProbe:
-    enabled: true
-    port: 13133
-    path: /
-    initialDelaySeconds: 5
-    periodSeconds: 10
-    timeoutSeconds: 5
-    failureThreshold: 6
-    successThreshold: 1
-
-  # -- Custom liveness probe
-  customLivenessProbe: {}
-  # -- Custom readiness probe
-  customReadinessProbe: {}
-
-  # -- Extra volumes mount for OtelCollector pod
-  extraVolumeMounts: []
-  # -- Extra volumes for OtelCollector pod
-  extraVolumes: []
-
-  ingress:
-    # -- Enable ingress for OtelCollector
-    enabled: false
-    # -- Ingress Class Name to be used to identify ingress controllers
-    className: ""
-    # -- Annotations to OtelCollector Ingress
-    annotations: {}
-      # cert-manager.io/cluster-issuer: letsencrypt-prod
-      # nginx.ingress.kubernetes.io/ssl-redirect: "true"
-      # nginx.ingress.kubernetes.io/backend-protocol: "GRPC"
-      # kubernetes.io/ingress.class: nginx
-      # kubernetes.io/tls-acme: "true"
-    # -- OtelCollector Ingress Host names with their path details
-    hosts:
-      - host: otelcollector.domain.com
-        paths:
-          - path: /
-            pathType: ImplementationSpecific
-            port: 4318
-    # -- OtelCollector Ingress TLS
-    tls: []
-    #  - secretName: chart-example-tls
-    #    hosts:
-    #      - otelcollector.domain.com
-
-  # -- Configure resource requests and limits. Update according to your own use
-  # case as these values might not be suitable for your workload.
-  # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  #
-  # @default -- See `values.yaml` for defaults
-  resources:
-    requests:
-      cpu: 100m
-      memory: 200Mi
-    # limits:
-    #   cpu: "1"
-    #   memory: 2Gi
-
-  # -- OtelCollector priority class name
-  priorityClassName: ""
-  # -- Node selector for settings for OtelCollector pod
-  nodeSelector: {}
-  # -- Toleration labels for OtelCollector pod assignment
-  tolerations: []
-  # -- Affinity settings for OtelCollector pod
-  affinity: {}
-  # -- TopologySpreadConstraints describes how OtelCollector pods ought to spread
-  topologySpreadConstraints:
-    - maxSkew: 1
-      topologyKey: kubernetes.io/hostname
-      whenUnsatisfiable: ScheduleAnyway
-      labelSelector:
-        matchLabels:
-          app.kubernetes.io/component: otel-collector
-
-  podSecurityContext: {}
-    # fsGroup: 2000
-
-  securityContext: {}
-    # capabilities:
-    #   drop:
-    #   - ALL
-    # readOnlyRootFilesystem: true
-    # runAsNonRoot: true
-    # runAsUser: 1000
-
-  autoscaling:
-    enabled: false
-    minReplicas: 1
-    maxReplicas: 11
-    targetCPUUtilizationPercentage: 50
-    targetMemoryUtilizationPercentage: 50
-    behavior: {}
-      # scaleDown:
-      #   stabilizationWindowSeconds: 300
-      #  policies:
-      #   - type: Pods
-      #     value: 1
-      #     periodSeconds: 180
-      # scaleUp:
-      #   stabilizationWindowSeconds: 300
-      #   policies:
-      #   - type: Pods
-      #     value: 2
-      #     periodSeconds: 60
-
-    autoscalingTemplate: []
-    keda:
-      enabled: false
-      pollingInterval: "30"   # check 30sec periodically for metrics data
-      cooldownPeriod: "300"   # once the load decreased, it will wait for 5 min and downscale
-      minReplicaCount: "1"    # should be >= replicaCount specified in values.yaml
-      maxReplicaCount: "5"
-      triggers:
-        - type: memory
-          metadata:
-            type: Utilization
-            value: "80"   # hpa make sure average Utilization <=80 by adding new pods
-        - type: cpu
-          metadata:
-            type: Utilization
-            value: "80"   # hpa make sure average Utlization <=80 by adding new pods
-
-  # -- Configurations for OtelCollector
-  # @default -- See `values.yaml` for defaults
-  config:
-    receivers:
-      otlp/spanmetrics:
-        protocols:
-          grpc:
-            endpoint: localhost:12345
-      otlp:
-        protocols:
-          grpc:
-            endpoint: 0.0.0.0:4317
-            max_recv_msg_size_mib: 16
-          http:
-            endpoint: 0.0.0.0:4318
-      jaeger:
-        protocols:
-          grpc:
-            endpoint: 0.0.0.0:14250
-          thrift_http:
-            endpoint: 0.0.0.0:14268
-          # Uncomment to enable thift_company receiver.
-          # You will also have set set enable it in `otelCollector.ports
-          # thrift_compact:
-          #   endpoint: 0.0.0.0:6831
-      hostmetrics:
-        collection_interval: 30s
-        scrapers:
-          cpu: {}
-          load: {}
-          memory: {}
-          disk: {}
-          filesystem: {}
-          network: {}
-      httplogreceiver/heroku:
-        # endpoint specifies the network interface and port which will receive data
-        endpoint: 0.0.0.0:8081
-        source: heroku
-      httplogreceiver/json:
-        # endpoint specifies the network interface and port which will receive data
-        endpoint: 0.0.0.0:8082
-        source: json
-    processors:
-      # default parsing of logs
-      # logstransform/internal:
-      #   operators:
-      #     - type: regex_parser
-      #       id: traceid
-      #       # https://regex101.com/r/yFW5UC/1
-      #       regex: '(?i)(^trace|(("| )+trace))((-|_||)id("|=| |-|:)*)(?P<trace_id>[A-Fa-f0-9]+)'
-      #       parse_from: body
-      #       parse_to: attributes.temp_trace
-      #       if: 'body matches "(?i)(^trace|((\"| )+trace))((-|_||)id(\"|=| |-|:)*)(?P<trace_id>[A-Fa-f0-9]+)"'
-      #       output: spanid
-      #     - type: regex_parser
-      #       id: spanid
-      #       # https://regex101.com/r/DZ2gng/1
-      #       regex: '(?i)(^span|(("| )+span))((-|_||)id("|=| |-|:)*)(?P<span_id>[A-Fa-f0-9]+)'
-      #       parse_from: body
-      #       parse_to: attributes.temp_trace
-      #       if: 'body matches "(?i)(^span|((\"| )+span))((-|_||)id(\"|=| |-|:)*)(?P<span_id>[A-Fa-f0-9]+)"'
-      #       output: trace_parser
-      #     - type: trace_parser
-      #       id: trace_parser
-      #       trace_id:
-      #         parse_from: attributes.temp_trace.trace_id
-      #       span_id:
-      #         parse_from: attributes.temp_trace.span_id
-      #       output: remove_temp
-      #     - type: remove
-      #       id: remove_temp
-      #       field: attributes.temp_trace
-      #       if: '"temp_trace" in attributes'
-      # Batch processor config.
-      # ref: https://github.com/open-telemetry/opentelemetry-collector/blob/main/processor/batchprocessor/README.md
-      batch:
-        send_batch_size: 50000
-        timeout: 1s
-      # Resource detection processor config.
-      # ref: https://github.com/open-telemetry/opentelemetry-collector-contrib/blob/main/processor/resourcedetectionprocessor/README.md
-      resourcedetection:
-        # detectors: include ec2/eks for AWS, gcp for GCP and azure/aks for Azure
-        # env detector included below adds custom labels using OTEL_RESOURCE_ATTRIBUTES envvar
-        detectors:
-          - env
-          # - elastic_beanstalk
-          # - eks
-          # - ecs
-          # - ec2
-          # - gcp
-          # - azure
-          # - heroku
-          - system
-        timeout: 2s
-        system:
-          hostname_sources: [dns, os]
-      # Memory Limiter processor.
-      # If set to null, will be overridden with values based on k8s resource limits.
-      # ref: https://github.com/open-telemetry/opentelemetry-collector/blob/main/processor/memorylimiterprocessor/README.md
-      memory_limiter: null
-      signozspanmetrics/cumulative:
-        metrics_exporter: clickhousemetricswrite
-        latency_histogram_buckets:
-          [
-            100us,
-            1ms,
-            2ms,
-            6ms,
-            10ms,
-            50ms,
-            100ms,
-            250ms,
-            500ms,
-            1000ms,
-            1400ms,
-            2000ms,
-            5s,
-            10s,
-            20s,
-            40s,
-            60s,
-          ]
-        dimensions_cache_size: 100000
-        dimensions:
-          - name: service.namespace
-            default: default
-          - name: deployment.environment
-            default: default
-          - name: signoz.collector.id
-      signozspanmetrics/delta:
-        metrics_exporter: clickhousemetricswrite
-        latency_histogram_buckets:
-          [
-            100us,
-            1ms,
-            2ms,
-            6ms,
-            10ms,
-            50ms,
-            100ms,
-            250ms,
-            500ms,
-            1000ms,
-            1400ms,
-            2000ms,
-            5s,
-            10s,
-            20s,
-            40s,
-            60s,
-          ]
-        dimensions_cache_size: 100000
-        dimensions:
-          - name: service.namespace
-            default: default
-          - name: deployment.environment
-            default: default
-          - name: signoz.collector.id
-        aggregation_temporality: AGGREGATION_TEMPORALITY_DELTA
-      # K8s Attribute processor config.
-      # ref: https://github.com/open-telemetry/opentelemetry-collector-contrib/blob/main/processor/k8sattributesprocessor/README.md
-      k8sattributes:
-        # -- Whether to detect the IP address of agents and add it as an attribute to all telemetry resources.
-        # If set to true, Agents will not make any k8s API calls, do any discovery of pods or extract any metadata.
-        passthrough: false
-        # -- Filters can be used to limit each OpenTelemetry agent to query pods based on specific
-        # selector to only dramatically reducing resource requirements for very large clusters.
-        filter:
-          # -- Restrict each OpenTelemetry agent to query pods running on the same node
-          node_from_env_var: K8S_NODE_NAME
-        pod_association:
-          - sources:
-            - from: resource_attribute
-              name: k8s.pod.ip
-          - sources:
-            - from: resource_attribute
-              name: k8s.pod.uid
-          - sources:
-            - from: connection
-        extract:
-          metadata:
-            - k8s.namespace.name
-            - k8s.pod.name
-            - k8s.pod.uid
-            - k8s.pod.start_time
-            - k8s.deployment.name
-            - k8s.node.name
-    extensions:
-      health_check:
-        endpoint: 0.0.0.0:13133
-      zpages:
-        endpoint: localhost:55679
-      pprof:
-        endpoint: localhost:1777
-    exporters:
-      clickhousetraces:
-        datasource: tcp://${CLICKHOUSE_HOST}:${CLICKHOUSE_PORT}/?database=${CLICKHOUSE_TRACE_DATABASE}&username=${CLICKHOUSE_USER}&password=${CLICKHOUSE_PASSWORD}
-        low_cardinal_exception_grouping: ${LOW_CARDINAL_EXCEPTION_GROUPING}
-      clickhousemetricswrite:
-        endpoint: tcp://${CLICKHOUSE_HOST}:${CLICKHOUSE_PORT}/?database=${CLICKHOUSE_DATABASE}&username=${CLICKHOUSE_USER}&password=${CLICKHOUSE_PASSWORD}
-        timeout: 15s
-        resource_to_telemetry_conversion:
-          enabled: true
-      clickhouselogsexporter:
-        dsn: tcp://${CLICKHOUSE_HOST}:${CLICKHOUSE_PORT}/?username=${CLICKHOUSE_USER}&password=${CLICKHOUSE_PASSWORD}
-        timeout: 10s
-      prometheus:
-        endpoint: 0.0.0.0:8889
-    service:
-      telemetry:
-        metrics:
-          address: 0.0.0.0:8888
-      extensions: [health_check, zpages, pprof]
-      pipelines:
-        traces:
-          receivers: [otlp, jaeger]
-          processors: [signozspanmetrics/cumulative, signozspanmetrics/delta, batch]
-          exporters: [clickhousetraces]
-        metrics:
-          receivers: [otlp]
-          processors: [batch]
-          exporters: [clickhousemetricswrite]
-        metrics/internal:
-          receivers: [hostmetrics]
-          processors: [resourcedetection, k8sattributes, batch]
-          exporters: [clickhousemetricswrite]
-        logs:
-          receivers: [otlp, httplogreceiver/heroku, httplogreceiver/json]
-          processors: [batch]
-          exporters: [clickhouselogsexporter]
-
-# Default values for OtelCollectorMetrics
-otelCollectorMetrics:
-  enabled: true
-  name: "otel-collector-metrics"
-  image:
-    registry: docker.io
-    repository: signoz/signoz-otel-collector
-    tag: 0.88.14
-    pullPolicy: IfNotPresent
-
-  # -- Image Registry Secret Names for OtelCollector
-  # If set, this has higher precedence than the root level or global value of imagePullSecrets.
-  imagePullSecrets: []
-
-  # OpenTelemetry Collector executable
-  command:
-    # -- OtelCollectorMetrics command name
-    name: /signoz-collector
-    # -- OtelCollectorMetrics command extra arguments
-    extraArgs:
-      - --feature-gates=-pkg.translator.prometheus.NormalizeName
-
-  configMap:
-    # -- Specifies whether a configMap should be created (true by default)
-    create: true
-
-  # OtelCollectorMetrics Service Account
-  serviceAccount:
-    # Specifies whether a service account should be created
-    create: true
-    # Annotations to add to the service account
-    annotations: {}
-    # The name of the service account to use.
-    # If not set and create is true, a name is generated using the fullname template
-    name:
-
-  # OtelCollectorMetrics service
-  service:
-    # -- Annotations to use by service associated to OtelCollectorMetrics
-    annotations: {}
-    # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-    type: ClusterIP
-
-  # -- OtelCollectorMetrics Deployment annotation.
-  annotations:
-    "helm.sh/hook-weight": "3"
-  # -- OtelCollectorMetrics pod(s) annotation.
-  podAnnotations:
-    signoz.io/scrape: 'true'
-    signoz.io/port: '8888'
-
-  # -- Additional environments to set for OtelCollectorMetrics
-  additionalEnvs: {}
-    # env_key: env_value
-
-  podSecurityContext: {}
-    # fsGroup: 2000
-
-  securityContext: {}
-    # capabilities:
-    #   drop:
-    #   - ALL
-    # readOnlyRootFilesystem: true
-    # runAsNonRoot: true
-    # runAsUser: 1000
-
-  minReadySeconds: 5
-  progressDeadlineSeconds: 120
-  replicaCount: 1
-
-  initContainers:
-    init:
-      enabled: false
-      image:
-        registry: docker.io
-        repository: busybox
-        tag: 1.35
-        pullPolicy: IfNotPresent
-      command:
-        delay: 5
-        endpoint: /ping
-        waitMessage: "waiting for clickhouseDB"
-        doneMessage: "clickhouse ready, starting otel collector metrics now"
-      resources: {}
-        # requests:
-        #   cpu: 100m
-        #   memory: 100Mi
-        # limits:
-        #   cpu: 100m
-        #   memory: 100Mi
-
-  # Configuration for ports
-  ports:
-    metrics:
-      # -- Whether to enable service port for internal metrics
-      enabled: false
-      # -- Container port for internal metrics
-      containerPort: 8888
-      # -- Service port for internal metrics
-      servicePort: 8888
-      # -- Protocol to use for internal metrics
-      protocol: TCP
-    zpages:
-      # -- Whether to enable service port for ZPages
-      enabled: false
-      # -- Container port for Zpages
-      containerPort: 55679
-      # -- Service port for Zpages
-      servicePort: 55679
-      # -- Protocol to use for Zpages
-      protocol: TCP
-    health-check:
-      # -- Whether to enable service port for health check
-      enabled: true
-      # -- Container port for health check
-      containerPort: 13133
-      # -- Service port for health check
-      servicePort: 13133
-      # -- Protocol to use for health check
-      protocol: TCP
-    pprof:
-      # -- Whether to enable service port for pprof
-      enabled: false
-      # -- Container port for pprof
-      containerPort: 1777
-      # -- Service port for pprof
-      servicePort: 1777
-      # -- Protocol to use for pprof
-      protocol: TCP
-
-
-  ## Configure liveness and readiness probes.
-  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
-  ##
-  livenessProbe:
-    enabled: true
-    port: 13133
-    path: /
-    initialDelaySeconds: 5
-    periodSeconds: 10
-    timeoutSeconds: 5
-    failureThreshold: 6
-    successThreshold: 1
-  readinessProbe:
-    enabled: true
-    port: 13133
-    path: /
-    initialDelaySeconds: 5
-    periodSeconds: 10
-    timeoutSeconds: 5
-    failureThreshold: 6
-    successThreshold: 1
-
-  ## Custom liveness and readiness probes
-  customLivenessProbe: {}
-  customReadinessProbe: {}
-
-  # -- Extra volumes mount for OtelCollectorMetrics pod
-  extraVolumeMounts: []
-  # -- Extra volumes for OtelCollectorMetrics pod
-  extraVolumes: []
-
-  ingress:
-    # -- Enable ingress for OtelCollectorMetrics
-    enabled: false
-    # -- Ingress Class Name to be used to identify ingress controllers
-    className: ""
-    # -- Annotations to OtelCollectorMetrics Ingress
-    annotations: {}
-      # cert-manager.io/cluster-issuer: letsencrypt-prod
-      # nginx.ingress.kubernetes.io/ssl-redirect: "true"
-      # nginx.ingress.kubernetes.io/backend-protocol: "GRPC"
-      # kubernetes.io/ingress.class: nginx
-      # kubernetes.io/tls-acme: "true"
-    # -- OtelCollectorMetrics Ingress Host names with their path details
-    hosts:
-      - host: otelcollector-metrics.domain.com
-        paths:
-          - path: /
-            pathType: ImplementationSpecific
-            port: 13133
-    # -- OtelCollectorMetrics Ingress TLS
-    tls: []
-    #  - secretName: chart-example-tls
-    #    hosts:
-    #      - otelcollector-metrics.domain.com
-
-  # -- Configure resource requests and limits. Update according to your own use
-  # case as these values might not be suitable for your workload.
-  # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  #
-  # @default -- See `values.yaml` for defaults
-  resources:
-    requests:
-      cpu: 100m
-      memory: 100Mi
-    # limits:
-    #   cpu: "1"
-    #   memory: 2Gi
-
-  # -- OtelCollectorMetrics priority class name
-  priorityClassName: ""
-  # -- Node selector for settings for OtelCollectorMetrics pod
-  nodeSelector: {}
-  # -- Toleration labels for OtelCollectorMetrics pod assignment
-  tolerations: []
-  # -- Affinity settings for OtelCollectorMetrics pod
-  affinity: {}
-  # -- TopologySpreadConstraints describes how OtelCollectorMetrics pods ought to spread
-  topologySpreadConstraints: []
-
-  # OtelCollectorMetrics RBAC config
-  clusterRole:
-    # -- Specifies whether a clusterRole should be created
-    create: true
-    # -- Annotations to add to the clusterRole
-    annotations: {}
-    # -- The name of the clusterRole to use.
-    # If not set and create is true, a name is generated using the fullname template
-    name: ""
-    # -- A set of rules as documented here.
-    # ref: https://kubernetes.io/docs/reference/access-authn-authz/rbac/
-    # @default -- See `values.yaml` for defaults
-    rules:
-      # k8sattributes processor requires these permissions
-      - apiGroups: [""]
-        resources: ["pods", "namespaces", "nodes"]
-        verbs: ["get", "watch", "list"]
-      - apiGroups: ["batch"]
-        resources: ["jobs"]
-        verbs: ["get", "list", "watch"]
-      - apiGroups: ["apps"]
-        resources: ["replicasets"]
-        verbs: ["get", "list", "watch"]
-      - apiGroups: ["extensions"]
-        resources: ["replicasets"]
-        verbs: ["get", "list", "watch"]
-      # other processors and receivers require these permissions
-      - apiGroups: [""]
-        resources: ["nodes", "nodes/proxy", "services", "endpoints"]
-        verbs: ["get", "list", "watch"]
-      - apiGroups: ["extensions"]
-        resources: ["ingresses"]
-        verbs: ["get", "list", "watch"]
-      - nonResourceURLs: ["/metrics"]
-        verbs: ["get"]
-
-    # OtelCollectorMetrics clusterRoleBinding
-    clusterRoleBinding:
-      # -- Annotations to add to the clusterRoleBinding
-      annotations: {}
-      # -- The name of the clusterRoleBinding to use.
-      # If not set and create is true, a name is generated using the fullname template
-      name: ""
-
-  # -- Configurations for OtelCollectorMetrics
-  # @default -- See `values.yaml` for defaults
-  config:
-    receivers:
-      hostmetrics:
-        collection_interval: 30s
-        scrapers:
-          cpu: {}
-          load: {}
-          memory: {}
-          disk: {}
-          filesystem: {}
-          network: {}
-      # prometheus scrape config
-      prometheus:
-        config:
-          scrape_configs:
-            # generic prometheus metrics scraper (scrapped when signoz.io pod annotations are set)
-            - job_name: "generic-collector"
-              scrape_interval: 60s
-              kubernetes_sd_configs:
-                - role: pod
-              relabel_configs:
-                - source_labels:
-                    [__meta_kubernetes_pod_annotation_signoz_io_scrape]
-                  action: keep
-                  regex: true
-                - source_labels:
-                    [__meta_kubernetes_pod_annotation_signoz_io_path]
-                  action: replace
-                  target_label: __metrics_path__
-                  regex: (.+)
-                - source_labels:
-                    [
-                      __meta_kubernetes_pod_ip,
-                      __meta_kubernetes_pod_annotation_signoz_io_port,
-                    ]
-                  action: replace
-                  separator: ":"
-                  target_label: __address__
-                - target_label: job_name
-                  replacement: generic-collector
-                # Uncomment line below to include all labels of the pod
-                # - action: labelmap
-                #   regex: __meta_kubernetes_pod_label_(.+)
-                - source_labels: [__meta_kubernetes_pod_label_app_kubernetes_io_name]
-                  action: replace
-                  target_label: signoz_k8s_name
-                - source_labels: [__meta_kubernetes_pod_label_app_kubernetes_io_instance]
-                  action: replace
-                  target_label: signoz_k8s_instance
-                - source_labels: [__meta_kubernetes_pod_label_app_kubernetes_io_component]
-                  action: replace
-                  target_label: signoz_k8s_component
-                - source_labels: [__meta_kubernetes_namespace]
-                  action: replace
-                  target_label: k8s_namespace_name
-                - source_labels: [__meta_kubernetes_pod_name]
-                  action: replace
-                  target_label: k8s_pod_name
-                - source_labels: [__meta_kubernetes_pod_uid]
-                  action: replace
-                  target_label: k8s_pod_uid
-                - source_labels: [__meta_kubernetes_pod_container_name]
-                  action: replace
-                  target_label: k8s_container_name
-                - source_labels: [__meta_kubernetes_pod_container_name]
-                  regex: (.+)-init
-                  action: drop
-                - source_labels: [__meta_kubernetes_pod_node_name]
-                  action: replace
-                  target_label: k8s_node_name
-                - source_labels: [__meta_kubernetes_pod_ready]
-                  action: replace
-                  target_label: k8s_pod_ready
-                - source_labels: [__meta_kubernetes_pod_phase]
-                  action: replace
-                  target_label: k8s_pod_phase
-    processors:
-      # Batch processor config.
-      # ref: https://github.com/open-telemetry/opentelemetry-collector/blob/main/processor/batchprocessor/README.md
-      batch:
-        send_batch_size: 10000
-        timeout: 1s
-      # Resource detection processor config.
-      # ref: https://github.com/open-telemetry/opentelemetry-collector-contrib/blob/main/processor/resourcedetectionprocessor/README.md
-      resourcedetection:
-        # detectors: include ec2/eks for AWS, gcp for GCP and azure/aks for Azure
-        # env detector included below adds custom labels using OTEL_RESOURCE_ATTRIBUTES envvar
-        detectors:
-          - env
-          # - elastic_beanstalk
-          # - eks
-          # - ecs
-          # - ec2
-          # - gcp
-          # - azure
-          # - heroku
-          - system
-        timeout: 2s
-        system:
-          hostname_sources: [dns, os]
-      # Memory Limiter processor.
-      # If set to null, will be overridden with values based on k8s resource limits.
-      # ref: https://github.com/open-telemetry/opentelemetry-collector/blob/main/processor/memorylimiterprocessor/README.md
-      memory_limiter: null
-      # K8s Attribute processor config.
-      # ref: https://github.com/open-telemetry/opentelemetry-collector-contrib/blob/main/processor/k8sattributesprocessor/README.md
-      k8sattributes/hostmetrics:
-        # -- Whether to detect the IP address of agents and add it as an attribute to all telemetry resources.
-        # If set to true, Agents will not make any k8s API calls, do any discovery of pods or extract any metadata.
-        passthrough: false
-        # -- Filters can be used to limit each OpenTelemetry agent to query pods based on specific
-        # selector to only dramatically reducing resource requirements for very large clusters.
-        filter:
-          # -- Restrict each OpenTelemetry agent to query pods running on the same node
-          node_from_env_var: K8S_NODE_NAME
-        pod_association:
-          - sources:
-            - from: resource_attribute
-              name: k8s.pod.ip
-          - sources:
-            - from: resource_attribute
-              name: k8s.pod.uid
-          - sources:
-            - from: connection
-        extract:
-          metadata:
-            - k8s.namespace.name
-            - k8s.pod.name
-            - k8s.pod.uid
-            - k8s.pod.start_time
-            - k8s.deployment.name
-            - k8s.node.name
-    extensions:
-      health_check:
-        endpoint: 0.0.0.0:13133
-      zpages:
-        endpoint: localhost:55679
-      pprof:
-        endpoint: localhost:1777
-    exporters:
-      clickhousemetricswrite:
-        timeout: 15s
-        endpoint: tcp://${CLICKHOUSE_HOST}:${CLICKHOUSE_PORT}/?database=${CLICKHOUSE_DATABASE}&username=${CLICKHOUSE_USER}&password=${CLICKHOUSE_PASSWORD}
-      clickhousemetricswrite/hostmetrics:
-        endpoint: tcp://${CLICKHOUSE_HOST}:${CLICKHOUSE_PORT}/?database=${CLICKHOUSE_DATABASE}&username=${CLICKHOUSE_USER}&password=${CLICKHOUSE_PASSWORD}
-        resource_to_telemetry_conversion:
-          enabled: true
-    service:
-      telemetry:
-        metrics:
-          address: 0.0.0.0:8888
-      extensions: [health_check, zpages, pprof]
-      pipelines:
-        metrics:
-          receivers: [prometheus]
-          processors: [batch]
-          exporters: [clickhousemetricswrite]
-        metrics/hostmetrics:
-          receivers: [hostmetrics]
-          processors: [resourcedetection, k8sattributes/hostmetrics, batch]
-          exporters: [clickhousemetricswrite/hostmetrics]
-
-# Default values for k8s-infra.
-# For complete list of configurations, check `values.yaml` of `k8s-infra` chart.
-# @ignored
-k8s-infra:
-  # -- Whether to enable K8s infra monitoring
-  enabled: true
-
-  # -- Endpoint/IP Address of the SigNoz or any other OpenTelemetry backend.
-  # Set it to `ingest.signoz.io:4317` for SigNoz SaaS.
-  #
-  # If set to null and the chart is installed as dependency, it will attempt
-  # to autogenerate the endpoint of SigNoz OtelCollector.
-  otelCollectorEndpoint: null
-
-  # -- Whether the OTLP endpoint is insecure.
-  # Set this to false, in case of secure OTLP endpoint.
-  otelInsecure: true
-
-  # -- Whether to skip verifying the certificate.
-  insecureSkipVerify: false
-
-  # -- API key of SigNoz SaaS
-  signozApiKey: ""
-  # -- Existing secret name to be used for API key.
-  apiKeyExistingSecretName: ""
-  # -- Existing secret key to be used for API key.
-  apiKeyExistingSecretKey: ""
-
-  # OTLP receivers TLS
-  otelTlsSecrets:
-    # -- Whether to enable OpenTelemetry OTLP secrets
-    enabled: false
-
-    # -- Path for the secrets volume
-    path: /secrets
-
-    # -- Name of the existing secret with TLS certificate, key and CA to be used.
-    # Files in the secret must be named `cert.pem`, `key.pem` and `ca.pem`.
-    existingSecretName:
-
-    # -- TLS certificate to be included in the secret
-    certificate: |
-      <INCLUDE_CERTIFICATE_HERE>
-
-    # -- TLS private key to be included in the secret
-    key: |
-      <INCLUDE_PRIVATE_KEY_HERE>
-
-    # -- TLS certificate authority (CA) certificate to be included in the secret
-    ca: ""
-
-  # -- Which namespace to install k8s-infra components.
-  # By default installed to the namespace same as the chart.
-  namespace: ""
-
-  # -- Presets to easily set up OtelCollector configurations.
-  presets:
-    loggingExporter:
-      enabled: false
-      # Verbosity of the logging export: basic, normal, detailed
-      verbosity: basic
-      # Number of messages initially logged each second
-      samplingInitial: 2
-      # Sampling rate after the initial messages are logged
-      samplingThereafter: 500
-    logsCollection:
-      enabled: true
-      startAt: beginning
-      includeFilePath: true
-      includeFileName: false
-      # This include path patterns for log files to be collected.
-      # By default, all container logs are collected.
-      # If whitelist is set, this list is ignored.
-      include:
-        - /var/log/pods/*/*/*.log
-      # This can be used to exclude certain log files from being collected.
-      # By default, kube-system and hotrod, locust pods are excluded.
-      blacklist:
-        enabled: true
-        signozLogs: false
-        namespaces:
-          - kube-system
-        pods:
-          - hotrod
-          - locust
-        containers: []
-        additionalExclude: []
-      # This can be used to whitelist certain log files to be collected.
-      # By default this is disabled and all container logs are collected.
-      # If whitelist is enabled, `include` is ignored.
-      whitelist:
-        enabled: false
-        signozLogs: true
-        namespaces: []
-        pods: []
-        containers: []
-        additionalInclude: []
-      operators:
-        # Find out which format is used by kubernetes
-        - type: router
-          id: get-format
-          routes:
-            - output: parser-docker
-              expr: 'body matches "^\\{"'
-            - output: parser-crio
-              expr: 'body matches "^[^ Z]+ "'
-            - output: parser-containerd
-              expr: 'body matches "^[^ Z]+Z"'
-        # Parse CRI-O format
-        - type: regex_parser
-          id: parser-crio
-          regex: '^(?P<time>[^ Z]+) (?P<stream>stdout|stderr) (?P<logtag>[^ ]*) ?(?P<log>.*)$'
-          output: extract_metadata_from_filepath
-          timestamp:
-            parse_from: attributes.time
-            layout_type: gotime
-            layout: '2006-01-02T15:04:05.000000000-07:00'
-        # Parse CRI-Containerd format
-        - type: regex_parser
-          id: parser-containerd
-          regex: '^(?P<time>[^ ^Z]+Z) (?P<stream>stdout|stderr) (?P<logtag>[^ ]*) ?(?P<log>.*)$'
-          output: extract_metadata_from_filepath
-          timestamp:
-            parse_from: attributes.time
-            layout: '%Y-%m-%dT%H:%M:%S.%LZ'
-        # Parse Docker format
-        - type: json_parser
-          id: parser-docker
-          output: extract_metadata_from_filepath
-          timestamp:
-            parse_from: attributes.time
-            layout: '%Y-%m-%dT%H:%M:%S.%LZ'
-        # Extract metadata from file path
-        - type: regex_parser
-          id: extract_metadata_from_filepath
-          regex: '^.*\/(?P<namespace>[^_]+)_(?P<pod_name>[^_]+)_(?P<uid>[a-f0-9\-]+)\/(?P<container_name>[^\._]+)\/(?P<restart_count>\d+)\.log$'
-          parse_from: attributes["log.file.path"]
-          output: add_cluster_name
-        # Add cluster name attribute from environment variable
-        - id: add_cluster_name
-          type: add
-          field: resource["k8s.cluster.name"]
-          value: EXPR(env("K8S_CLUSTER_NAME"))
-          output: move_stream
-        # Rename attributes
-        - type: move
-          id: move_stream
-          from: attributes.stream
-          to: attributes["log.iostream"]
-          output: move_container_name
-        - type: move
-          id: move_container_name
-          from: attributes.container_name
-          to: resource["k8s.container.name"]
-          output: move_namespace
-        - type: move
-          id: move_namespace
-          from: attributes.namespace
-          to: resource["k8s.namespace.name"]
-          output: move_pod_name
-        - type: move
-          id: move_pod_name
-          from: attributes.pod_name
-          to: resource["k8s.pod.name"]
-          output: move_restart_count
-        - type: move
-          id: move_restart_count
-          from: attributes.restart_count
-          to: resource["k8s.container.restart_count"]
-          output: move_uid
-        - type: move
-          id: move_uid
-          from: attributes.uid
-          to: resource["k8s.pod.uid"]
-          output: move_log
-        # Clean up log body
-        - type: move
-          id: move_log
-          from: attributes.log
-          to: body
-    hostMetrics:
-      enabled: true
-      collectionInterval: 30s
-      scrapers:
-        cpu: {}
-        load: {}
-        memory: {}
-        disk: {}
-        filesystem: {}
-        network: {}
-    kubeletMetrics:
-      enabled: true
-      collectionInterval: 30s
-      authType: serviceAccount
-      endpoint: ${K8S_HOST_IP}:10250
-      insecureSkipVerify: true
-    kubernetesAttributes:
-      enabled: true
-      # -- Whether to detect the IP address of agents and add it as an attribute to all telemetry resources.
-      # If set to true, Agents will not make any k8s API calls, do any discovery of pods or extract any metadata.
-      passthrough: false
-      # -- Pod Association section allows to define rules for tagging spans, metrics,
-      # and logs with Pod metadata.
-      podAssociation:
-        - sources:
-          - from: resource_attribute
-            name: k8s.pod.ip
-        - sources:
-          - from: resource_attribute
-            name: k8s.pod.uid
-        - sources:
-          - from: connection
-      # -- Which pod/namespace metadata to extract from a list of default metadata fields.
-      extractMetadatas:
-        - k8s.namespace.name
-        - k8s.pod.name
-        - k8s.pod.uid
-        - k8s.pod.start_time
-        - k8s.deployment.name
-        - k8s.node.name
-    clusterMetrics:
-      enabled: true
-      collectionInterval: 30s
-      nodeConditionsToReport:
-        - Ready
-        - MemoryPressure
-        # - DiskPressure
-        # - NetworkUnavailable
-        # - PIDPressure
-      allocatableTypesToReport:
-        - cpu
-        - memory
-        # - ephemeral-storage
-        # - storage
-    resourceDetectionInternal:
-      enabled: true
-      timeout: 2s
-      # DO NOT CHANGE BELOW TO false, causes data duplication in case attributes mismatched.
-      override: true
-    resourceDetection:
-      enabled: true
-      timeout: 2s
-      # detectors: include ec2/eks for AWS, gcp for GCP and azure/aks for Azure
-      # env detector included below adds custom labels using OTEL_RESOURCE_ATTRIBUTES envvar (set envResourceAttributes value)
-      detectors:
-        # - elastic_beanstalk
-        # - eks
-        # - ecs
-        # - ec2
-        # - gcp
-        # - azure
-        # - heroku
-        - system
-      systemHostnameSources:
-        - dns
-        - os
-        # - cname
-        # - lookup
-      envResourceAttributes: ""
-
-  # Default values for OtelAgent
-  otelAgent:
-    name: "otel-agent"
-    image:
-      registry: docker.io
-      repository: otel/opentelemetry-collector-contrib
-      tag: 0.88.0
-      pullPolicy: IfNotPresent
-
-    # -- Image Registry Secret Names for OtelAgent.
-    # If global.imagePullSecrets is set as well, it will merged.
-    imagePullSecrets: []
-      # - "otelAgent-pull-secret"
-
-    # OpenTelemetry Collector executable
-    command:
-      # -- OtelAgent command name
-      name: /otelcol-contrib
-      # -- OtelAgent command extra arguments
-      extraArgs: []
-
-    configMap:
-      # -- Specifies whether a configMap should be created (true by default)
-      create: true
-
-    # OtelAgent service
-    service:
-      # -- Annotations to use by service associated to OtelAgent
-      annotations: {}
-      # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-      type: ClusterIP
-
-    # -- OtelAgent daemonset annotation.
-    annotations: {}
-    # -- OtelAgent pod(s) annotation.
-    podAnnotations:
-      signoz.io/scrape: 'true'
-      signoz.io/port: '8888'
-      signoz.io/path: /metrics
-
-    # -- Additional environments to set for OtelAgent
-    additionalEnvs: {}
-      # env_key: env_value
-
-    # -- Configure resource requests and limits. Update according to your own use
-    # case as these values might not be suitable for your workload.
-    # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-    #
-    # @default -- See `values.yaml` for defaults
-    resources:
-      requests:
-        cpu: 100m
-        memory: 100Mi
-      # limits:
-      #   cpu: 250m
-      #   memory: 500Mi
-
-    # -- Configurations for OtelAgent
-    # @default -- See `values.yaml` for defaults
-    config:
-      receivers:
-        otlp:
-          protocols:
-            grpc:
-              endpoint: 0.0.0.0:4317
-            http:
-              endpoint: 0.0.0.0:4318
-      processors:
-        # Batch processor config.
-        # ref: https://github.com/open-telemetry/opentelemetry-collector/blob/main/processor/batchprocessor/README.md
-        batch:
-          send_batch_size: 10000
-          timeout: 200ms
-        # Memory Limiter processor.
-        # If set to null, will be overridden with values based on k8s resource limits.
-        # ref: https://github.com/open-telemetry/opentelemetry-collector/blob/main/processor/memorylimiterprocessor/README.md
-        memory_limiter: null
-      extensions:
-        health_check:
-          endpoint: 0.0.0.0:13133
-        zpages:
-          endpoint: localhost:55679
-        pprof:
-          endpoint: localhost:1777
-      exporters: {}
-      service:
-        telemetry:
-          metrics:
-            address: 0.0.0.0:8888
-        extensions: [health_check, zpages, pprof]
-        pipelines:
-          traces:
-            receivers: [otlp]
-            processors: [batch]
-            exporters: []
-          metrics:
-            receivers: [otlp]
-            processors: [batch]
-            exporters: []
-          metrics/internal:
-            receivers: []
-            processors: [batch]
-            exporters: []
-          logs:
-            receivers: [otlp]
-            processors: [batch]
-            exporters: []
-
-  # Default values for OtelDeployment
-  otelDeployment:
-    name: "otel-deployment"
-    image:
-      registry: docker.io
-      repository: otel/opentelemetry-collector-contrib
-      tag: 0.88.0
-      pullPolicy: IfNotPresent
-
-    # -- Image Registry Secret Names for OtelDeployment.
-    # If global.imagePullSecrets is set as well, it will merged.
-    imagePullSecrets: []
-      # - "otelDeployment-pull-secret"
-
-    # OpenTelemetry Collector executable
-    command:
-      # -- OtelDeployment command name
-      name: /otelcol-contrib
-      # -- OtelDeployment command extra arguments
-      extraArgs: []
-
-    configMap:
-      # -- Specifies whether a configMap should be created (true by default)
-      create: true
-
-    # OtelDeployment service
-    service:
-      # -- Annotations to use by service associated to OtelDeployment
-      annotations: {}
-      # -- Service Type: LoadBalancer (allows external access) or NodePort (more secure, no extra cost)
-      type: ClusterIP
-
-    # -- OtelDeployment daemonset annotation.
-    annotations: {}
-    # -- OtelDeployment pod(s) annotation.
-    podAnnotations:
-      signoz.io/scrape: 'true'
-      signoz.io/port: '8888'
-      signoz.io/path: /metrics
-
-    # -- Additional environments to set for OtelDeployment
-    additionalEnvs: {}
-      # env_key: env_value
-
-    # -- Configure resource requests and limits. Update according to your own use
-    # case as these values might not be suitable for your workload.
-    # Ref: http://kubernetes.io/docs/user-guide/compute-resources/
-    #
-    # @default -- See `values.yaml` for defaults
-    resources:
-      requests:
-        cpu: 100m
-        memory: 100Mi
-      # limits:
-      #   cpu: 1000m
-      #   memory: 1Gi
-
-    # -- Configurations for OtelDeployment
-    # @default -- See `values.yaml` for defaults
-    config:
-      receivers: {}
-      processors:
-        # Batch processor config.
-        # ref: https://github.com/open-telemetry/opentelemetry-collector/blob/main/processor/batchprocessor/README.md
-        batch:
-          send_batch_size: 10000
-          timeout: 1s
-        # Memory Limiter processor.
-        # If set to null, will be overridden with values based on k8s resource limits.
-        # ref: https://github.com/open-telemetry/opentelemetry-collector/blob/main/processor/memorylimiterprocessor/README.md
-        memory_limiter: null
-      extensions:
-        health_check:
-          endpoint: 0.0.0.0:13133
-        zpages:
-          endpoint: localhost:55679
-        pprof:
-          endpoint: localhost:1777
-      exporters: {}
-      service:
-        telemetry:
-          metrics:
-            address: 0.0.0.0:8888
-        extensions: [health_check, zpages, pprof]
-        pipelines:
-          metrics/internal:
-            receivers: []
-            processors: [batch]
-            exporters: []
-
-###
-###
-### ---- CERT-MANAGER ----
-###
-###
-# @ignored
-cert-manager:
-  # --- Whether cert-manager dependency chart should be installed.
-  enabled: false
-
-  # -- Whether to install CRDs. It is recommended to be set it to true for initial installation.
-  installCRDs: false
-
-  # -- Whether to enable letsencrypt. Defaults to true if nginx and cert-manager are enabled otherwise false.
-  letsencrypt:
-
-  # -- Ingress Class Name to be used to for single challenge solver, HTTP01
-  ingressClassName: nginx
-
-  # -- Whom to email when certificates are about to expire
-  # Defaults to noreply@<frontend-ingress-hostname>
-  email: null
-
-###
-###
-### ---- NGINX INGRESS CONTROLLER ----
-###
-###
-# @ignored
-ingress-nginx:
-  enabled: false
-
-###
-###
-### ---- MINIO ----
-###
-###
-# @ignored
-minio:
-  enabled: false
-
-  rootUser: rootuser
-  rootPassword: rootpass123
-
-  drivesPerNode: 1
-  replicas: 1
-  pools: 1
-
-  persistence:
-    enabled: true
-    annotations: {}
-
-    existingClaim: ""
-
-    storageClass: ""
-    VolumeName: ""
-    accessMode: ReadWriteOnce
-    size: 50Gi
-
-  resources:
-    requests:
-      cpu: 100m
-      memory: 200Mi
-    # limits:
-    #   cpu: "1"
-    #   memory: 2Gi
-
-###
-###
-### ---- KEYCLOAK ----
-###
-###
-# @ignored
-keycloak:
-  enabled: false
-
-  auth:
-    adminUser: admin
-    adminPassword: adminpass123
-
-  postgresql:
-    auth:
-      postgresPassword: pgadminpass123
-      username: bn_keycloak
-      password: bn_keycloak@123
-      database: bitnami_keycloak
-      existingSecret: ""
-
-  service:
-    type: ClusterIP
-
-  ingress:
-    enabled: false
-
-    hostname: keycloak.domain.com
-    ingressClassName: nginx
-    pathType: Prefix
-    servicePort: http
-
-    annotations:
-      cert-manager.io/cluster-issuer: letsencrypt-prod
-
-    tls: true
-    selfSigned: false