wiliot-certificate 4.4.3__py3-none-any.whl → 4.5.0a1__py3-none-any.whl

brg_certificate/tests/energy2400/signal_indicator_test/signal_indicator_test.py

@@ -1,276 +0,0 @@
-from brg_certificate.cert_prints import *
-from brg_certificate.cert_defines import *
-from brg_certificate.wlt_types import *
-import brg_certificate.cert_common as cert_common
-import brg_certificate.cert_config as cert_config
-
-# Test Description:
-#   This test is to verify the functionality of both signal indicator tx (tx_brg) and rx (rx_brg) at BRG level.
-#   We will configure several signal indicator params during the test, and check the functionality of the signal indicator logic
-#   for each of them.
-#   It is important to execute the test with several setups: 2 Fanstel BRG's, 2 Minew BRG's and 1 Fanstel and 1 Minew BRG.
-#   At first, we will configure several tx signal indicator params and check for ack's, to verify all indicated params were
-#   received at the cloud.
-#   Then, we will examine the signal indicator end-2-end logic with both transmitter and receiver:
-#   phase 1 - One BRG will be configured as signal indicator tx, and the other as signal indicator rx, and we expect to see
-#   signal indicator packets only from the tx BRG, and according to the tx params (to check the repetition and cycle params).
-#   phase 2 - Same as phase 1, but with different tx params configured.
-#   phase 3 - One rx BRG without any tx BRG. We don't expect to see any signal indicator packets. This phase is to verify the
-#   brg module logic is working properly, and no tag packet is accidentally being treated as signal indicator packet.
-#   phase 4 - Both BRG's will be configured to be transmitters and receivers, with different tx params for each one. we expect
-#   to see signal indicator packets from both BRG's, according to the tx params.
-#   phase 5 - One BRG will be configured as signal indicator tx, but no rx, so we don't expect to receive signal indicatopr packets.
-#   that way we can assure the logic within the receiver is not confused by the signal indicator uuid as external sensor.
-
-
-# Test MACROS #
-NUM_OF_SCANNING_CYCLE = 5
-DEFAULT_SCAN_TIME = 30
-SCAN_DELAY_TIME = 3
-
-
-def test_rssi_threshold(test):
-    cycle, rep = 5, 4
-    tx_brg_ = test.brg0
-    rx_brg_ = test.brg1
-    rssi_threshold = -25
-
-    utPrint(f"TX BRG with RX- cycle = {cycle}, repetition = {rep}\n", "BLUE")
-    # configuring receiver #
-    utPrint(f"Configuring BRG {rx_brg_.id_str} as Signal Indicator Receiver with RSSI Threshold of {rssi_threshold}", "BOLD")
-    test = cert_config.brg1_configure(test=test, module=rx_brg_.sensors, fields=[BRG_SENSOR0, BRG_RSSI_THRESHOLD],
-                                      values=[ag.EXTERNAL_SENSORS_SIGNAL_INDICATOR, rssi_threshold])[0]
-    if test.rc == TEST_FAILED:
-        test.add_reason(f"BRG {rx_brg_.id_str}: didn't receive signal indicator receiver configuration!")
-        return test
-    # configuring transmitter #
-    utPrint(f"Configuring BRG {tx_brg_.id_str} as Signal Indicator Transmitter", "BOLD")
-    test = cert_config.brg_configure(test=test, module=tx_brg_.energy2400, fields=[BRG_SIGNAL_INDICATOR_CYCLE, BRG_SIGNAL_INDICATOR_REP],
-                                     values=[cycle, rep])[0]
-    if test.rc == TEST_FAILED:
-        test.add_reason(f"BRG {tx_brg_.id_str}: didn't receive signal indicator transmitter configuration!")
-        return test
-    utPrint(f"BRG {tx_brg_.id_str} configured to be transmitter - cycle = {cycle},"
-            f"repetition = {rep}", "BOLD")
-    # phase analysis #
-    mqtt_scan_n_create_log_file(test, (NUM_OF_SCANNING_CYCLE * cycle) + SCAN_DELAY_TIME, "rssi_threshold")
-    received_signal_ind_pkts = cert_common.get_all_sig_ind_pkts(test=test, rx_brg=rx_brg_, tx_brg=tx_brg_)
-    for p in received_signal_ind_pkts:
-        print(f"rssi value: {p[RSSI]}")
-    rssi_threshold_viloation_pkts = [p for p in received_signal_ind_pkts if p[RSSI] >= -1 * rssi_threshold]
-    if rssi_threshold_viloation_pkts:
-        test.rc = TEST_FAILED
-        test.add_reason(f"rssi_threshold phase failed - BRG {rx_brg_.id_str} echoed"
-                        f" {len(rssi_threshold_viloation_pkts)} signal indicator packets\n with RSSI weaker than {rssi_threshold}")
-    return test
-
-
-def test_brg0_rx_brg1_tx(test):
-
-    rx_brg_ = test.brg0
-    tx_brg_ = test.brg1
-    cycle, rep = 8, 4
-
-    utPrint(f"TX BRG with RX- cycle = {cycle}, repetition = {rep}\n", "BLUE")
-    # configuring receiver #
-    utPrint(f"Configuring BRG {rx_brg_.id_str} as Signal Indicator Receiver", "BOLD")
-    test = cert_config.brg_configure(test=test, module=rx_brg_.sensors, fields=[BRG_SENSOR0],
-                                     values=[ag.EXTERNAL_SENSORS_SIGNAL_INDICATOR])[0]
-    if test.rc == TEST_FAILED:
-        test.add_reason(f"BRG {rx_brg_.id_str}: didn't receive signal indicator receiver configuration!")
-        return test
-    # configuring transmitter #
-    utPrint(f"Configuring BRG {tx_brg_.id_str} as Signal Indicator Transmitter", "BOLD")
-    test = cert_config.brg1_configure(test=test, module=tx_brg_.energy2400,
-                                      fields=[BRG_SIGNAL_INDICATOR_CYCLE, BRG_SIGNAL_INDICATOR_REP],
-                                      values=[cycle, rep])[0]
-    if test.rc == TEST_FAILED:
-        test.add_reason(f"BRG {tx_brg_.id_str}: didn't receive signal indicator transmitter configuration!")
-        return test
-    utPrint(f"BRG {tx_brg_.id_str} configured to be transmitter - cycle = {cycle},"
-            f"repetition = {rep}", "BOLD")
-    # phase analysis #
-    mqtt_scan_n_create_log_file(test, (NUM_OF_SCANNING_CYCLE * cycle) + SCAN_DELAY_TIME, f"brg0_rx_brg1_tx_{cycle}_{rep}")
-    received_signal_ind_pkts = cert_common.get_all_sig_ind_pkts(test=test, rx_brg=rx_brg_, tx_brg=tx_brg_)
-
-    if cert_common.sig_ind_pkts_fail_analysis(tx_brg_, rx_brg_, NUM_OF_SCANNING_CYCLE, received_signal_ind_pkts):
-        test.rc = TEST_FAILED
-        expected_signal_ind_pkts = cert_common.exp_sig_ind_pkts2(tx_brg_, rx_brg_, NUM_OF_SCANNING_CYCLE)
-        test.add_reason(f"brg0_rx_brg1_tx phase failed - BRG {rx_brg_.id_str} received wrong number of "
-                        f"signal indicator packets\nreceived {len(received_signal_ind_pkts)} packets, "
-                        f"expected {expected_signal_ind_pkts} packets")
-        print(received_signal_ind_pkts)  # TODO: logging print(debug)
-        print([[p[TIMESTAMP], p[SENSOR_PKT].pkt.rx_antenna] for p in received_signal_ind_pkts])
-
-    test = cert_common.rx_tx_antenna_check(test, received_signal_ind_pkts, tx_brg_, rx_brg_, NUM_OF_SCANNING_CYCLE)
-    test = cert_common.output_power_check(test, received_signal_ind_pkts, tx_brg_)
-    test = cert_common.rssi_check(test, received_signal_ind_pkts)
-
-    return test
-
-
-def test_brg0_none_brg1_rx(test):
-    cycle, rep = ag.BRG_DEFAULT_SIGNAL_INDICATOR_CYCLE, ag.BRG_DEFAULT_SIGNAL_INDICATOR_REP
-    tx_brg_ = test.brg1
-    rx_brg_ = test.brg1
-    utPrint(f"RX BRG without TX- cycle = {cycle}, repetition = {rep}\n", "BLUE")
-    # configuring receiver #
-    utPrint(f"Configuring BRG {rx_brg_.id_str} as Signal Indicator Receiver", "BOLD")
-    test = cert_config.brg1_configure(test=test, module=rx_brg_.sensors, fields=[BRG_SENSOR0],
-                                      values=[ag.EXTERNAL_SENSORS_SIGNAL_INDICATOR])[0]
-    if test.rc == TEST_FAILED:
-        test.add_reason(f"BRG {rx_brg_.id_str}: didn't receive signal indicator receiver configuration!")
-        return test
-    utPrint(f"BRG {rx_brg_.id_str} successfully configured as Signal Indicator Receiver\n", "BOLD")
-
-    # phase analysis #
-    mqtt_scan_n_create_log_file(test, DEFAULT_SCAN_TIME, "brg0_none_brg1_rx")
-    expected_signal_ind_pkts = [0]
-    received_signal_ind_pkts = cert_common.get_all_sig_ind_pkts(test=test, rx_brg=rx_brg_, tx_brg=tx_brg_)
-    if len(received_signal_ind_pkts) not in expected_signal_ind_pkts:
-        test.rc = TEST_FAILED
-        test.add_reason(f"brg0_rx_brg1_tx phase failed - BRG {rx_brg_.id_str} received wrong number of "
-                        f"signal indicator packets\n received {len(received_signal_ind_pkts)} packets, "
-                        f"expected {expected_signal_ind_pkts} packets")
-
-    return test
-
-
-def test_brg0_rxtx_brg1_rxtx(test):
-    tx_cycle, tx_rep = 5, 4
-    rx_cycle, rx_rep = 5, 4
-    tx_brg_ = test.brg0
-    rx_brg_ = test.brg1
-    utPrint("Both BRG's are transmitter and receivers, with different values\n", "BLUE")
-    # configuring first brg (tx_brg_) as receiver
-    utPrint(f"Configuring BRG {tx_brg_.id_str} as Signal Indicator Receiver", "BOLD")
-    test = cert_config.brg_configure(test=test, module=tx_brg_.sensors, fields=[BRG_SENSOR0],
-                                     values=[ag.EXTERNAL_SENSORS_SIGNAL_INDICATOR])[0]
-    if test.rc == TEST_FAILED and test.exit_on_param_failure:
-        test.add_reason(f"BRG {tx_brg_.id_str}: didn't receive signal indicator receiver configuration!")
-        return test
-    utPrint(f"BRG {tx_brg_.id_str} successfully configured as Signal Indicator Receiver\n", "BOLD")
-    # configuring first brg (tx_brg_) as transmitter
-    utPrint(f"Configuring BRG {tx_brg_.id_str} as Signal Indicator Transmitter", "BOLD")
-    test = cert_config.brg_configure(test=test, module=tx_brg_.energy2400, fields=[BRG_SIGNAL_INDICATOR_CYCLE, BRG_SIGNAL_INDICATOR_REP],
-                                     values=[tx_cycle, tx_rep])[0]
-    if test.rc == TEST_FAILED and test.exit_on_param_failure:
-        test.add_reason(f"BRG {tx_brg_.id_str}: didn't receive signal indicator transmitter configuration!")
-        return test
-    utPrint(f"BRG {tx_brg_.id_str} configured to be transmitter - cycle={tx_cycle}, repetition={tx_rep}", "BOLD")
-
-    # configuring second brg (rx_brg_) as receiver
-    utPrint(f"Configuring BRG {rx_brg_.id_str} as Signal Indicator Receiver", "BOLD")
-    test = cert_config.brg1_configure(test=test, module=rx_brg_.sensors, fields=[BRG_SENSOR0],
-                                      values=[ag.EXTERNAL_SENSORS_SIGNAL_INDICATOR])[0]
-    if test.rc == TEST_FAILED and test.exit_on_param_failure:
-        test.add_reason(f"BRG {rx_brg_.id_str}: didn't receive signal indicator receiver configuration!")
-        return test
-    utPrint(f"BRG {rx_brg_.id_str} successfully configured as Signal Indicator Receiver\n", "BOLD")
-
-    # configuring second brg (rx_brg_) as transmitter (already configured as rx)
-    utPrint(f"Configuring BRG {rx_brg_.id_str} as Signal Indicator Transmitter", "BOLD")
-    test = cert_config.brg1_configure(test=test, module=rx_brg_.energy2400, fields=[BRG_SIGNAL_INDICATOR_CYCLE, BRG_SIGNAL_INDICATOR_REP],
-                                      values=[rx_cycle, rx_rep])[0]
-    if test.rc == TEST_FAILED and test.exit_on_param_failure:
-        test.add_reason(f"BRG {rx_brg_.id_str}: didn't receive signal indicator transmitter configuration!")
-        return test
-    utPrint(f"BRG {rx_brg_.id_str} configured to be transmitter - cycle={rx_cycle}, repetition={rx_rep}")
-
-    # phase analysis #
-    mqtt_scan_n_create_log_file(test, NUM_OF_SCANNING_CYCLE * max(tx_cycle, rx_cycle) + SCAN_DELAY_TIME, "brg0_rxtx_brg1_rxtx")
-
-    # Analyzing tx_brg_ performance as receiver
-    utPrint(f"Analyzing tx_brg {tx_brg_.id_str} performance as a Receiver\n", "BOLD")
-    received_signal_ind_pkts = cert_common.get_all_sig_ind_pkts(test=test, rx_brg=tx_brg_, tx_brg=rx_brg_)
-    if cert_common.sig_ind_pkts_fail_analysis(tx_brg_, rx_brg_, NUM_OF_SCANNING_CYCLE, received_signal_ind_pkts):
-        test.rc = TEST_FAILED
-        expected_signal_ind_pkts = cert_common.exp_sig_ind_pkts2(tx_brg_, rx_brg_, NUM_OF_SCANNING_CYCLE)
-        test.add_reason(f"brg0_rxtx_brg1_rxtx phase failed - BRG {tx_brg_.id_str} received wrong number of "
-                        f"signal indicator packets\nreceived {len(received_signal_ind_pkts)} packets, "
-                        f"expected {expected_signal_ind_pkts} packets")
-        print(received_signal_ind_pkts)  # TODO: logging print(debug)
-
-    # Analyzing rx_brg_ performance as receiver
-    utPrint(f"Analyzing rx_brg {rx_brg_.id_str} performance as a Receiver\n", "BOLD")
-    received_signal_ind_pkts = cert_common.get_all_sig_ind_pkts(test=test, rx_brg=rx_brg_, tx_brg=tx_brg_)
-    if cert_common.sig_ind_pkts_fail_analysis(tx_brg_, rx_brg_, NUM_OF_SCANNING_CYCLE, received_signal_ind_pkts):
-        test.rc = TEST_FAILED
-        expected_signal_ind_pkts = cert_common.exp_sig_ind_pkts2(tx_brg_, rx_brg_, NUM_OF_SCANNING_CYCLE)
-        test.add_reason(f"brg0_rxtx_brg1_rxtx phase failed - BRG {rx_brg_.id_str} received wrong number of "
-                        f"signal indicator packets\n received {len(received_signal_ind_pkts)} packets, "
-                        f"expected {expected_signal_ind_pkts} packets")
-        print(received_signal_ind_pkts)  # TODO: logging print(debug)
-    # NOTE: We skipped the antenna and output power checks for this phase
-    return test
-
-
-def test_brg0_tx_brg1_none(test):
-    # Tx BRG without rx. just waiting for packets to be sent from the transmitter and verify
-    # The receiver isn't receiving any signal indicator packets.
-    cycle, rep = 4, 3
-    tx_brg_ = test.brg0
-    rx_brg_ = test.brg1
-    utPrint(f"TX BRG without RX - cycle = {cycle}, repetition = {rep}\n", "BLUE")
-    # configuring transmitter #
-    utPrint(f"Configuring BRG {tx_brg_.id_str} as Signal Indicator Transmitter", "BOLD")
-    test = cert_config.brg_configure(test=test, module=tx_brg_.energy2400,
-                                     fields=[BRG_SIGNAL_INDICATOR_CYCLE, BRG_SIGNAL_INDICATOR_REP], values=[cycle, rep])[0]
-    if test.rc == TEST_FAILED:
-        test.add_reason(f"BRG {tx_brg_.id_str}: didn't receive signal indicator transmitter configuration!")
-        return test
-
-    # phase analysis #
-    mqtt_scan_n_create_log_file(test, (NUM_OF_SCANNING_CYCLE * cycle) + SCAN_DELAY_TIME, "brg0_tx_brg1_none")
-    expected_signal_ind_pkts = [0]
-    received_signal_ind_pkts = cert_common.get_all_sig_ind_pkts(test=test, rx_brg=rx_brg_, tx_brg=tx_brg_)
-    if len(received_signal_ind_pkts) not in expected_signal_ind_pkts:
-        test.rc = TEST_FAILED
-        test.add_reason(f"brg0_tx_brg1_none phase failed - received signal indicator packet from BRG"
-                        f"{rx_brg_.id_str}")
-    test = cert_common.output_power_check(test, received_signal_ind_pkts, tx_brg_)
-
-    return test
-
-
-SIGNAL_INDICATOR_TEST_MAP = {"rssi_threshold": test_rssi_threshold, "brg0_rx_brg1_tx": test_brg0_rx_brg1_tx,
-                             "brg0_none_brg1_rx": test_brg0_none_brg1_rx, "brg0_rxtx_brg1_rxtx": test_brg0_rxtx_brg1_rxtx,
-                             "brg0_tx_brg1_none": test_brg0_tx_brg1_none}
-
-
-def run(test):
-    # Test prolog
-    test = cert_common.test_prolog(test)
-
-    for param in test.params:
-        phase_run_print(param.name)
-        test = SIGNAL_INDICATOR_TEST_MAP[param.value](test)
-        generate_log_file(test, param.name)
-        field_functionality_pass_fail_print(test, param.name)
-        test.set_phase_rc(param.name, test.rc)
-        test.add_phase_reason(param.name, test.reason)
-        if test.rc == TEST_FAILED:
-            if test.exit_on_param_failure:
-                break  # break the whole for loop and keep the test as failed
-            else:
-                test.reset_result()  # reset result and continue to next param
-                continue
-
-        # Reset to defaults after every phase (don't fail the phase on that)
-        test = cert_config.config_brg_defaults(test, modules=[test.brg0.energy2400, test.brg0.sensors])[0]
-        if test.rc == TEST_FAILED:
-            test.add_reason("Failed to restore brg0 to defaults")
-        else:
-            test = cert_config.config_brg1_defaults(test, modules=[test.brg1.energy2400, test.brg1.sensors])[0]
-            if test.rc == TEST_FAILED:
-                test.add_reason("Failed to restore brg0 to defaults")
-        if test.rc == TEST_FAILED:
-            test.set_phase_rc(param.name, test.rc)
-            test.add_phase_reason(param.name, test.reason)
-            if test.exit_on_param_failure:
-                break
-        else:
-            test.reset_result()
-
-    return cert_common.test_epilog(test, revert_brgs=True, modules=[test.brg0.energy2400, test.brg0.sensors],
-                                   brg1_modules=[test.brg1.energy2400, test.brg1.sensors])

brg_certificate/tests/energy_sub1g/signal_indicator_functionality_test/signal_indicator_functionality_test.json

@@ -1,20 +0,0 @@
-{
-    "name": "Signal Indicator Functionality",
-    "module": "Energizer Sub-1GHz",
-    "purpose": "Test functionality for supported sub1g signal indicator cycle & repetitions sets of values",
-    "documentation": "https://community.wiliot.com/customers/s/article/Wiliot-Network-Sub1-Ghz-Energizer-module",
-    "initialCondition": "1 GW and at least 1 BRG configured to defaults",
-    "procedure": ["Test prolog",
-    "rssi_threshold - check the if rssi value is between 0 to -25.",
-    "brg0_tx_brg1_rx (for all EP's)- one brg is transmitter and the second is receiver, we expect to receive signal indicator packets for all energy patterns",
-    "brg0_tx_brg1_rx ( only israel ep) - one brg is transmitter and the second is receiver, we expect to receive signal indicator packets in the specified energy pattern",
-    "brg0_none_brg1_rx - One BRG will be configured as signal indicator rx, but no tx, so we don't expect to receive signal indicator packets.",
-    "brg0_rxtx_brg1_rxtx - Both BRG's will be configured to be transmitters and receivers, with different tx params for each one. we expect to see signal indicator packets from both BRG's, according to the tx params.",
-    "Test epilog"],
-    "expectedOutcome": "All phases passes successfully",
-    "mandatory": 0,
-    "multiBridgeTest": 1,
-    "gwOnlyTest": 0,
-    "internalBridge": 1,
-    "allSupportedValues": []
-}