vtlengine 1.0.3rc2__py3-none-any.whl → 1.0.4__py3-none-any.whl

vtlengine/Exceptions/messages.py

@@ -10,26 +10,25 @@ All exceptions exposed by the Vtl engine.
 centralised_messages = {
     # Input Validation errors
     "0-1-2-1": "Invalid json structure because additional properties have been supplied "
-               "on file {filename}.",
+    "on file {filename}.",
     "0-1-2-2": "Errors found on file {filename}: {errors}",
     "0-1-2-3": "Component {component} is duplicated.",
     "0-1-2-4": "Invalid json structure because {err} on file {filename}.",
     "0-1-2-5": "File {file} must be encoded in utf-8 (without BOM).",
-    # "0-1-2-5": "The library item {li}, used in this module {mdl}, is not found.",
     # JSON Schema validations
+    "0-3-1-1": "Dataset {dataset} is not valid according to JSON schema",
     # Infer Data Structure errors
-    # "0-1-1-1": "A csv file or a dataframe is required.",
     "0-1-1-2": "The provided {source} must have data to can infer the data structure.",
     "0-1-1-3": "Can not infer data structure: {errors}.",
     "0-1-1-4": "On Dataset {name} loading:  An identifier cannot have null values, found null "
-               "values on {null_identifier}.",
+    "values on {null_identifier}.",
     "0-1-1-5": "On Dataset {name} loading: Datasets without identifiers must have 0 or "
-               "1 datapoints.",
+    "1 datapoints.",
     "0-1-1-6": "Duplicated records. Combination of identifiers are repeated.",
     "0-1-1-7": "G1 - The provided CSV file is empty.",
     "0-1-1-8": "The following identifiers {ids} were not found , review file {file}.",
     "0-1-1-9": "You have a problem related with commas, review rfc4180 standard, review file "
-               "{file}.",
+    "{file}.",
     "0-1-1-10": "On Dataset {name} loading: Component {comp_name} is missing in Datapoints.",
     "0-1-1-11": "Wrong data in the file for this scalardataset {name}.",
     "0-1-1-12": "On Dataset {name} loading: not possible to cast column {column} to {type}.",
@@ -38,74 +37,43 @@ centralised_messages = {
     "0-1-0-1": " Trying to redefine input datasets {dataset}.",  # Semantic Error
     # ------------Operators-------------
     # General Semantic errors
-    # "1-1-1-1": "At op {op}. Unable to validate types.",
     "1-1-1-1": "Invalid implicit cast from {type_1} to {type_2}.",
     "1-1-1-2": "Invalid implicit cast from {type_1} and {type_2} to {type_check}.",
     "1-1-1-3": "At op {op}: {entity} {name} cannot be promoted to {target_type}.",
-    # "1-1-1-2": "At op {op}: Component {comp_name} type must be '{type_1}', found '{type_2}'.",
-    # "1-1-1-3": "At op {op}: Invalid data type for Component {comp_name} and Scalar
-    # {scalar_name}.",
     "1-1-1-4": "At op {op}: Operation not allowed for multimeasure datasets.",
-    # "1-1-1-5": "At op {op}: Invalid data type {type} for Scalar {scalar_name}.",
-    # TODO: Deprecated not in use, delete this.
-    # "1-1-1-6": "At op {op}: Internal error: Not same parents.",
-    # "1-1-1-7": "At op {op}: Invalid data type {type} for Component {name}.",
     "1-1-1-8": "At op {op}: Invalid Dataset {name}, no measures defined.",
     "1-1-1-9": "At op {op}: Invalid Dataset {name}, all measures must have the same type: {type}.",
     "1-1-1-10": "Component {comp_name} not found in Dataset {dataset_name}.",
-    # "1-1-1-11": "At op {op}: Identifier {name} is specified more than once.",
-    # "1-1-1-12": "At op {op}: Different scalar types for component {comp_name} and set
-    # {set_name}.",
     "1-1-1-13": "At op {op}: Component {comp_name} role must be '{role_1}', found '{role_2}'.",
-    # "1-1-1-14": "At op {op}: Dataset {name} type must be '{type_1}'.",
     "1-1-1-15": "At op {op}: Datasets {name_1} and {name_2} does not contain the same number of "
-                "{type}.",
+    "{type}.",
     "1-1-1-16": "Found structure not nullable and null values.",
-    # "1-1-1-17": "At op {op}: Problem with nullability for this components {name_1} and {name_2}.",
-    # "1-1-1-18": "No {type} {value} found.",
-    # "1-1-1-19": "At op {op}: Invalid data type for Scalar {scalar_name_1} and Scalar
-    # {scalar_name_2}.",
     "1-1-1-20": "At op {op}: Only applies to datasets, instead of this a Scalar was provided.",
-    # General Interpreter errors
-    # "2-1-1-1": "At op {op}: Unable to evaluate.",
-    # "2-1-1-2": "At op {op}: Dataset {name} is empty.",
-    # TODO: Review this message, for unpivot for example we can't raise this error,
-    #  because we can have a empty dataset
-    # "2-1-1-3": "At op {op}: No rules have results.",
     # Aggregate errors
-    # TODO: Use error message 1-1-1-8
-    # "1-1-2-1": "At op {op}: No measures found to aggregate.",
     "1-1-2-2": "At op {op}: Only Identifiers are allowed for grouping, "
-               "found {id_name} - {id_type}.",
+    "found {id_name} - {id_type}.",
     "1-1-2-3": "Having component output type must be boolean, found {type}.",
-    # "1-1-2-4": "At op {op}: Component {id_name} not found in dataset",
     # Analytic errors
-    # TODO: Use error message 1-1-1-8
-    # "1-1-3-1": "At op {op}: No measures found to analyse.",
     "1-1-3-2": "At op {op}: Only Identifiers are allowed for partitioning, "
-               "found {id_name} - {id_type}.",
+    "found {id_name} - {id_type}.",
     # Cast errors
     "1-1-5-1": "Type {type_1}, cannot be cast to {type_2}.",
     "1-1-5-3": "Impossible to cast from type {type_1} to {type_2}, without providing a mask.",
     "1-1-5-4": "Invalid mask to cast from type {type_1} to {type_2}.",
     "1-1-5-5": "A mask can't be provided to cast from type {type_1} to {type_2}. Mask provided: "
-               "{mask_value}.",
+    "{mask_value}.",
     "2-1-5-1": "Impossible to cast {value} from type {type_1} to {type_2}.",
     # Clause errors
-    # "1-1-6-1": "At op {op}: Component {comp_name} not found in dataset {dataset_name}.",
     "1-1-6-2": "At op {op}: The identifier {name} in dataset {dataset} could not be included "
-               "in the {op} op.",
-    # TODO: This is not possible at all, as calc clause adds a new column and
-    #  identifiers are still unique
-    # "1-1-6-3": "Found duplicated values on identifiers after Calc clause.",
+    "in the {op} op.",
     "1-1-6-4": "At op {op}: Alias symbol cannot have the name of a component symbol: "
-               "{symbol_name} - {comp_name}.",
+    "{symbol_name} - {comp_name}.",
     "1-1-6-5": "At op {op}: Scalar values are not allowed at sub operator, found {name}.",
     "1-1-6-6": "Membership is not allowed inside a clause, found {dataset_name}#{comp_name}.",
     "1-1-6-7": "Cannot use component {comp_name} as it was generated in another calc expression.",
     # all the components used in calccomp must belong to the operand dataset
     "1-1-6-8": "Cannot use component {comp_name} for rename, it is already in the dataset "
-               "{dataset_name}.",
+    "{dataset_name}.",
     # it is the same error that 1-1-8-1 AND similar but not the same 1-3-1
     "1-1-6-9": "At op {op}: The following components are repeated: {from_components}.",
     "1-1-6-10": "At op {op}: Component {operand} in dataset {dataset_name} is not an identifier",
@@ -113,28 +81,27 @@ centralised_messages = {
     # it is the same as the one that appears in joins, but are differents kinds of failures
     "1-1-6-12": "At op {op}: Not allowed to drop the last element.",
     "1-1-6-13": "At op {op}: Not allowed to overwrite an identifier: {comp_name}",
-    # "1-1-6-15": "At op {op}: Component {comp_name} already exists in dataset {dataset_name}",
     # Comparison errors
     "1-1-7-1": "At op {op}: Value in {left_name} of type {left_type} is not comparable to value "
-               "{right_name} of type {right_type}.",
+    "{right_name} of type {right_type}.",
     # Conditional errors
     "1-1-9-1": "At op {op}: The evaluation condition must result in a Boolean "
-               "expression, found '{type}'.",
+    "expression, found '{type}'.",
     "1-1-9-3": "At op {op}: Then clause {then_name} and else clause {else_name}, both must be "
-               "Scalars.",
+    "Scalars.",
     "1-1-9-4": "At op {op}: The condition dataset {name} must contain an unique measure.",
     "1-1-9-5": "At op {op}: The condition dataset Measure must be a Boolean, found '{type}'.",
     "1-1-9-6": "At op {op}: Then-else datasets have different number of identifiers compared "
-               "with condition dataset.",
+    "with condition dataset.",
     "1-1-9-9": "At op {op}: {clause} component {clause_name} role must be {role_1}, found "
-               "{role_2}.",
+    "{role_2}.",
     "1-1-9-10": "At op {op}: {clause} dataset have different number of identifiers compared with "
-                "condition dataset.",
+    "condition dataset.",
     "1-1-9-11": "At op {op}: Condition component {name} must be Boolean, found {type}.",
     "1-1-9-12": "At op {op}: then clause {then_symbol} and else clause {else_symbol}, both must "
-                "be Datasets or at least one of them a Scalar.",
+    "be Datasets or at least one of them a Scalar.",
     "1-1-9-13": "At op {op}: then {then} and else {else_clause} datasets must contain the same "
-                "number of components.",
+    "number of components.",
     "2-1-9-1": "At op {op}: Condition operators must have the same operator type.",
     "2-1-9-2": "At op {op}: Condition {name} it's not a boolean.",
     "2-1-9-3": "At op {op}: All then and else operands must be scalars.",
@@ -146,68 +113,66 @@ centralised_messages = {
     "1-1-10-1": "At op {op}: The {op_type} operand must have exactly one measure of type {me_type}",
     "1-1-10-2": "At op {op}: Number of variable has to be equal between the call and signature.",
     "1-1-10-3": "At op {op}: Name in the call {found} has to be equal to variable rule in "
-                "signature {expected}.",
+    "signature {expected}.",
     "1-1-10-4": "At op {op}: When a hierarchical ruleset is defined for value domain, it is "
-                "necessary to specify the component with the rule clause on call.",
+    "necessary to specify the component with the rule clause on call.",
     "1-1-10-5": "No rules to analyze on Hierarchy Roll-up as rules have no = operator.",
     "1-1-10-6": "At op {op}: Name in the call {found} has to be equal to variable condition in "
-                "signature {expected} .",
+    "signature {expected} .",
     "1-1-10-7": "Not found component {comp_name} on signature.",
     "1-1-10-8": "At op {op}: Measures involved have to be numerical, other types found {found}.",
     "1-1-10-9": "Invalid signature for the ruleset {ruleset}. On variables, condComp and "
-                "ruleComp must be the same",
+    "ruleComp must be the same",
     # General Operators
-    # "1-1-12-1": "At op {op}: You could not recalculate the identifier {name} on dataset "
-    # "{dataset}.",
-    # "2-1-12-1": "At op {op}: Create a null measure without a scalar type is not allowed. "
-    # "Please use cast operator.",
+    "2-1-12-1": "At op {op}: Create a null measure without a scalar type is not allowed."
+    "Please use cast operator.",
     # Join Operators
     "1-1-13-1": "At op {op}: Duplicated alias {duplicates}.",
     "1-1-13-2": "At op {op}: Missing mandatory aliasing.",
     "1-1-13-3": "At op {op}: Join conflict with duplicated names for column {name} from original "
-                "datasets.",
+    "datasets.",
     "1-1-13-4": "At op {op}: Using clause, using={using_names}, does not define all the "
-                "identifiers, of non reference dataset {dataset}.",
+    "identifiers, of non reference dataset {dataset}.",
     "1-1-13-5": "At op {op}: Invalid subcase B1, All the datasets must share as identifiers the "
-                "using ones.",
+    "using ones.",
     # not in use but we keep for later, in use 1-1-13-4
     "1-1-13-6": "At op {op}: Invalid subcase B2, All the declared using components "
-                "'{using_components}' must be present as components in the reference dataset "
-                "'{reference}'.",
+    "'{using_components}' must be present as components in the reference dataset "
+    "'{reference}'.",
     "1-1-13-7": "At op {op}: Invalid subcase B2, All the non reference datasets must share as "
-                "identifiers the using ones.",
+    "identifiers the using ones.",
     "1-1-13-8": "At op {op}: No available using clause.",
     "1-1-13-9": "Ambiguity for this variable {comp_name} inside a join clause.",
     "1-1-13-10": "The join operator does not perform scalar/component operations.",
     "1-1-13-11": "At op {op}: Invalid subcase A, {dataset_reference} should be a superset but "
-                 "{component} not found.",
+    "{component} not found.",
     # inner_join and left join
     "1-1-13-12": "At op {op}: Invalid subcase A. There are different identifiers for the provided "
-                 "datasets",
+    "datasets",
     # full_join
     "1-1-13-13": "At op {op}: Invalid subcase A. There are not same number of identifiers for the "
-                 "provided datasets",
+    "provided datasets",
     # full_join
     "1-1-13-14": "Cannot perform a join over a Dataset Without Identifiers: {name}.",
     "1-1-13-15": "At op {op}: {comp_name} has to be a Measure for all the provided datasets inside "
-                 "the join",
+    "the join",
     "1-1-13-16": "At op {op}: Invalid use, please review : {msg}.",
     "1-1-13-17": "At op {op}: {comp_name} not present in the dataset(result from join VDS) at the "
-                 "time it is called",
+    "time it is called",
     # Operators general errors
     "1-1-14-1": "At op {op}: Measure names don't match: {left} - {right}.",
     "1-1-14-3": "At op {op}: Invalid scalar types for identifiers at DataSet {dataset}. One {type} "
-                "identifier expected, {count} found.",
+    "identifier expected, {count} found.",
     "1-1-14-5": "At op {op}: {names} with type/s {types} is not compatible with {op}",
     "1-1-14-6": "At op {op}: {comp_name} with type {comp_type} and scalar_set with type "
-                "{scalar_type} is not compatible with {op}",
+    "{scalar_type} is not compatible with {op}",
     # "1-1-14-8": "At op {op}: Operation not allowed for multimeasure datasets.",
     "1-1-14-9": "At op {op}: {names} with type/s {types} is not compatible with {op} on datasets "
-                "{datasets}.",
+    "{datasets}.",
     # Numeric Operators
     "1-1-15-8": "At op {op}: {op} operator cannot have a {comp_type} as parameter.",
     "2-1-15-1": "At op {op}: Component {comp_name} from dataset {dataset_name} contains negative "
-                "values.",
+    "values.",
     "2-1-15-2": "At op {op}: Value {value} could not be negative.",
     "2-1-15-3": "At op {op}: Base value {value} could not be less or equal 0.",
     "2-1-15-4": "At op {op}: Invalid values in Component {name}.",
@@ -216,9 +181,9 @@ centralised_messages = {
     "2-1-15-7": "At op {op}: {op} operator cannot be a dataset.",
     # Set Operators
     "1-1-17-1": "At op {op}: Datasets {dataset_1} and {dataset_2} have different number of "
-                "components",
+    "components",
     # String Operators
-    # "1-1-18-1": "At op {op}: Invalid Dataset {name}. Dataset with one measure expected.",
+    "1-1-18-1": "At op {op}: Invalid Dataset {name}. Dataset with one measure expected.",
     "1-1-18-2": "At op {op}: Composition of DataSet and Component is not allowed.",
     "1-1-18-3": "At op {op}: Invalid parameter position: {pos}.",
     "1-1-18-4": "At op {op}: {param_type} parameter should be {correct_type}.",
@@ -230,12 +195,12 @@ centralised_messages = {
     "1-1-19-2": "At op {op}: Unknown date type for {op}.",
     "1-1-19-3": "At op {op}: Invalid {param} for {op}.",
     "1-1-19-4": "At op {op}: Invalid values {value_1} and {value_2}, periodIndTo parameter must be "
-                "a larger duration value than periodIndFrom parameter.",
+    "a larger duration value than periodIndFrom parameter.",
     "1-1-19-5": "At op {op}: periodIndTo parameter must be a larger duration value than the values "
-                "to aggregate.",
+    "to aggregate.",
     "1-1-19-6": "At op {op}: Time type used in the component {comp} is not supported.",
     "1-1-19-7": "At op {op}: can be applied only on Data Sets (of time series) and returns a Data "
-                "Set (of time series).",
+    "Set (of time series).",
     # flow_to_stock, stock_to_flow
     "1-1-19-8": "At op {op}: {op} can only be applied to a {comp_type}",
     "1-1-19-9": "At op {op}: {op} can only be applied to a {comp_type} with a {param}",
@@ -243,38 +208,35 @@ centralised_messages = {
     "1-1-19-10": "{op} can only be applied to operands with data type as Date or Time Period",
     # Other time operators
     "2-1-19-1": "At op {op}: Invalid values {value_1} and {value_2} for duration, "
-                "periodIndTo parameter must be a larger duration value than the "
-                "values to aggregate.",
+    "periodIndTo parameter must be a larger duration value than the "
+    "values to aggregate.",
     "2-1-19-2": "Invalid period indicator {period}.",
     "2-1-19-3": "Only same period indicator allowed for both parameters ({period1} != {period2}).",
     "2-1-19-4": "Date setter, ({value} > {date}). Cannot set date1 with a value higher than date2.",
     "2-1-19-5": "Date setter, ({value} < {date}). Cannot set date2 with a value lower than date1.",
     "2-1-19-6": "Invalid period format, must be YYYY-(L)NNN: {period_format}",
     "2-1-19-7": "Period Number must be between 1 and {periods} for period indicator "
-                "{period_indicator}.",
+    "{period_indicator}.",
     "2-1-19-8": "Invalid date format, must be YYYY-MM-DD: {date}",
     "2-1-19-9": "Invalid day {day} for year {year}.",
     "2-1-19-10": "Invalid year {year}, must be between 1900 and 9999.",
     "2-1-19-11": "{op} operator is not compatible with time values",
-    "2-1-19-12": "At op {op}: Invalid param type {type} for param {name}, "
-                 "expected {expected}.",
+    "2-1-19-12": "At op {op}: Invalid param type {type} for param {name}, expected {expected}.",
     "2-1-19-13": "At op {op}: Invalid param data_type {type} for param {name}, "
-                 "expected {expected}.",
+    "expected {expected}.",
     "2-1-19-14": "At op {op}: Invalid dataset {name}, requires at least one Date/Time_Period "
-                 "measure.",
-    "2-1-19-15": "{op} can only be applied according to the following mask: PY/YDDD/D",
-    "2-1-19-16": "{op} can only be applied according to the following mask: PM/MDD/D",
-    "2-1-19-17": "{op} can only be positive numbers",
+    "measure.",
+    "2-1-19-15": "{op} can only be applied according to the iso 8601 format mask",
+    "2-1-19-16": "{op} can only be positive numbers",
     # ----------- Interpreter Common ------
     "2-3-1": "{comp_type} {comp_name} not found.",
     "2-3-2": "{op_type} cannot be used with {node_op} operators.",
-    # "2-3-3": "Internal error: Not able to categorize {value}.",
     "2-3-4": "{op} operator must have a {comp}",
     "2-3-5": "Expected {param_type}, got {type_name} on UDO {op}, parameter {param_name}",
     "2-3-6": "Dataset {dataset_name} not found, please check input datastructures",
     "2-3-9": "{comp_type} {comp_name} not found in {param}.",
     "2-3-10": "No {comp_type} have been defined.",
-    # "2-3-11": "{pos} operand must be a dataset.",
+    "2-3-11": "{pos} operand must be a dataset.",
     # ---------Semantic Analyzer Common----
     "1-3-1": "Please don't use twice {alias} like var_to.",
     "1-3-3": "Overwriting a dataset/variable is not allowed, trying it with {varId_value}.",
@@ -285,7 +247,6 @@ centralised_messages = {
     "1-3-10": "Not valid set declaration, mixed scalar types {scalar_1} and {scalar_2}.",
     "1-3-12": "Default arguments cannot be followed by non-default arguments.",
     "1-3-15": "Missing datastructure definition for required input Dataset {input}.",
-    # "1-3-16": "Component {name} not found.",
     "1-3-17": "Operations without output assigned are not available.",
     "1-3-19": "No {node_type} {node_value} found.",
     "1-3-20": "RuleComp of Hierarchical Ruleset can only be an identifier, {name} is a {role}.",
@@ -293,13 +254,13 @@ centralised_messages = {
     "1-3-22": "Unable to categorize {node_value}.",
     "1-3-23": "Missing value domain '{name}' definition, please provide an structure.",
     "1-3-24": "Internal error on Analytic operators inside a calc, No partition or "
-              "order symbol found.",
+    "order symbol found.",
     "1-3-26": "Value domain {name} not found.",
     "1-3-27": "Dataset without identifiers are not allowed in {op} operator.",
     "1-3-28": "At op {op}: invalid number of parameters: received {received}, expected at "
-              "least: {expected}",
+    "least: {expected}",
     "1-3-29": "At op {op}: can not use user defined operator that returns a component outside "
-              "clause operator or rule",
+    "clause operator or rule",
     "1-3-30": "At op {op}: too many parameters: received {received}, expected: {expected}",
     "1-3-31": "Cannot use component {name} outside an aggregate function in a having clause.",
     "1-3-32": "Cannot perform operation {op} inside having clause.",
@@ -311,25 +272,24 @@ centralised_messages = {
     "1-4-1-1": "At op {op}: User defined {option} declared as {type_1}, found {type_2}.",
     "1-4-1-2": "Using variable {value}, not defined at {op} definition.",
     "1-4-1-3": "At op {op}: using variable {value}, not defined as an argument.",
-    "1-4-1-4": "Found duplicates at arguments naming, please review {type} " "definition {op}.",
+    "1-4-1-4": "Found duplicates at arguments naming, please review {type} definition {op}.",
     "1-4-1-5": "Found duplicates at rule naming: {names}. Please review {type} "
-               "{ruleset_name} definition.",
+    "{ruleset_name} definition.",
     "1-4-1-6": "At op {op}: Arguments incoherence, {defined} defined {passed} passed.",
     "1-4-1-7": "All rules must be named or not named, but found mixed criteria at {type} "
-               "definition {name}.",
+    "definition {name}.",
     "1-4-1-8": "All rules must have different code items in the left side of '=' in hierarchy "
-               "operator at hierachical ruleset definition {name}.",
+    "operator at hierachical ruleset definition {name}.",
     "1-4-1-9": "At op check_datapoint: {name} has an invalid datatype expected DataSet, found "
-               "Scalar.",
+    "Scalar.",
     # AST Creation
     "1-4-2-1": "Eval could not be called without a {option} type definition.",
     "1-4-2-2": "Optional or empty expression node is not allowed in time_agg.",
     "1-4-2-3": "{value} could not be called in the count.",
     "1-4-2-4": "At op {op}: Only one order_by element must be used in Analytic with range "
-               "windowing.",
+    "windowing.",
     "1-4-2-5": "At op {op}: User defined operator without returns is not implemented.",
     "1-4-2-6": "At op {op}: Window must be provided.",
     "1-4-2-7": "At op {op}: Partition by or order by clause must be provided for Analytic "
-               "operators.",
-    # Not Implemented Error
+    "operators.",
 }