voxcity 0.6.22__py3-none-any.whl → 0.6.24__py3-none-any.whl

voxcity/utils/visualization.py

@@ -2385,6 +2385,23 @@ def _rgb_tuple_to_plotly_color(rgb_tuple):
     except Exception:
         return "rgb(128,128,128)"
 
+def _mpl_cmap_to_plotly_colorscale(cmap_name, n=256):
+    """
+    Convert a matplotlib colormap name to a Plotly colorscale list.
+    """
+    try:
+        cmap = cm.get_cmap(cmap_name)
+    except Exception:
+        cmap = cm.get_cmap('viridis')
+    if n < 2:
+        n = 2
+    scale = []
+    for i in range(n):
+        x = i / (n - 1)
+        r, g, b, _ = cmap(x)
+        scale.append([x, f"rgb({int(255*r)},{int(255*g)},{int(255*b)})"])
+    return scale
+
 
 def visualize_voxcity_plotly(
     voxel_array,
@@ -2399,49 +2416,123 @@ def visualize_voxcity_plotly(
     height=800,
     show=True,
     return_fig=False,
+    # Building simulation overlay
+    building_sim_mesh=None,
+    building_value_name='svf_values',
+    building_colormap='viridis',
+    building_vmin=None,
+    building_vmax=None,
+    building_nan_color='gray',
+    building_opacity=1.0,
+    building_shaded=False,
+    render_voxel_buildings=False,
+    # Ground simulation surface overlay
+    ground_sim_grid=None,
+    ground_dem_grid=None,
+    ground_z_offset=None,
+    ground_view_point_height=None,
+    ground_colormap='viridis',
+    ground_vmin=None,
+    ground_vmax=None,
+    sim_surface_opacity=0.95,
+    ground_shaded=False,
 ):
     """
-    Interactive 3D visualization where each occupied cell is rendered as a cube (six faces)
-    using Plotly Mesh3d. One Mesh3d trace per class.
+    Interactive 3D visualization using Plotly Mesh3d which can render:
+    - Voxel cubes (one Mesh3d trace per exposed face per class)
+    - Optional building-surface simulation mesh overlay
+    - Optional ground-level simulation surface overlay (triangulated)
 
-    Parameters are similar to visualize_voxcity_plotly, but rendering is via exact cubes.
+    Parameters
+    ----------
+    voxel_array : np.ndarray (nx, ny, nz)
+        Voxel class grid. Required for voxel rendering; can be None if only overlays are shown.
+    meshsize : float
+        Cell size (m) for converting voxel indices to metric coordinates.
+    classes : list[int] or None
+        Classes to render for voxel cubes. Default: all non-zero present in the array.
+    voxel_color_map : str or dict
+        Scheme name understood by get_voxel_color_map, or mapping {class_id: [R,G,B]}.
+    opacity : float
+        Opacity for voxel cubes.
+    max_dimension : int
+        Target maximum dimension for auto-downsampling.
+    downsample : int or None
+        Explicit stride for voxels. If None, auto-downsample when needed.
+    title, width, height, show, return_fig : standard display controls.
+
+    Building overlay
+    ----------------
+    building_sim_mesh : trimesh.Trimesh or similar with .vertices, .faces
+    building_value_name : str (default 'svf_values')
+    building_colormap : str (default 'viridis')
+    building_vmin, building_vmax : float or None
+    building_nan_color : str (default 'gray')
+    building_opacity : float (default 1.0)
+    building_shaded : bool (default False)
+    render_voxel_buildings : bool (default False; when False, exclude class -3 from voxel cubes)
+
+    Ground overlay
+    --------------
+    ground_sim_grid : 2D array of values
+    ground_dem_grid : 2D array of ground elevations
+    ground_z_offset or ground_view_point_height : float above DEM (default 1.5 m)
+    ground_colormap : str (default 'viridis')
+    ground_vmin, ground_vmax : float or None
+    sim_surface_opacity : float (default 0.95)
+    ground_shaded : bool (default False)
     """
     if voxel_array is None or getattr(voxel_array, 'ndim', 0) != 3:
-        raise ValueError("voxel_array must be a 3D numpy array (nx, ny, nz)")
-
-    vox = voxel_array
+        # Allow overlays without voxels
+        if building_sim_mesh is None and (ground_sim_grid is None or ground_dem_grid is None):
+            raise ValueError("voxel_array must be a 3D numpy array (nx, ny, nz) when no overlays are provided")
+        vox = None
+    else:
+        vox = voxel_array
 
     # Downsample for performance if requested or auto-needed
     # Respect explicit downsample even when it is 1 (no auto-downsample)
-    if downsample is not None:
-        stride = max(1, int(downsample))
-    else:
-        stride = 1
-        nx, ny, nz = vox.shape
-        max_dim = max(nx, ny, nz)
-        if max_dim > max_dimension:
-            stride = int(np.ceil(max_dim / max_dimension))
-
-    if stride > 1:
-        vox = vox[::stride, ::stride, ::stride]
-
-    nx, ny, nz = vox.shape
+    stride = 1
+    if vox is not None:
+        if downsample is not None:
+            stride = max(1, int(downsample))
+        else:
+            nx_tmp, ny_tmp, nz_tmp = vox.shape
+            max_dim = max(nx_tmp, ny_tmp, nz_tmp)
+            if max_dim > max_dimension:
+                stride = int(np.ceil(max_dim / max_dimension))
+        if stride > 1:
+            vox = vox[::stride, ::stride, ::stride]
 
-    # Coordinate of voxel centers in meters
-    dx = meshsize * stride
-    dy = meshsize * stride
-    dz = meshsize * stride
-    x = np.arange(nx, dtype=float) * dx
-    y = np.arange(ny, dtype=float) * dy
-    z = np.arange(nz, dtype=float) * dz
+        nx, ny, nz = vox.shape
 
-    # Choose classes
-    if classes is None:
-        classes = np.unique(vox[vox != 0]).tolist()
-    if not classes:
-        raise ValueError("No classes to visualize (voxel grid may be empty)")
+        # Coordinate of voxel centers in meters
+        dx = meshsize * stride
+        dy = meshsize * stride
+        dz = meshsize * stride
+        x = np.arange(nx, dtype=float) * dx
+        y = np.arange(ny, dtype=float) * dy
+        z = np.arange(nz, dtype=float) * dz
+
+        # Choose classes
+        if classes is None:
+            classes_all = np.unique(vox[vox != 0]).tolist()
+        else:
+            classes_all = list(classes)
+        # Exclude building voxels (-3) only when a building overlay is provided and hiding is desired
+        if building_sim_mesh is not None and getattr(building_sim_mesh, 'vertices', None) is not None:
+            if render_voxel_buildings:
+                classes_to_draw = classes_all
+            else:
+                classes_to_draw = [c for c in classes_all if int(c) != -3]
+        else:
+            classes_to_draw = classes_all
 
-    vox_dict = get_voxel_color_map(voxel_color_map)
+        # Resolve color map: accept scheme name or explicit dict
+        if isinstance(voxel_color_map, dict):
+            vox_dict = voxel_color_map
+        else:
+            vox_dict = get_voxel_color_map(voxel_color_map)
 
     def exposed_face_masks(occ):
         # occ shape (nx, ny, nz)
@@ -2542,21 +2633,204 @@ def visualize_voxcity_plotly(
 
     fig = go.Figure()
 
-    for cls in classes:
-        if not np.any(vox == cls):
-            continue
-        occ = (vox == cls)
-        posx, negx, posy, negy, posz, negz = exposed_face_masks(occ)
-        color_rgb = vox_dict.get(int(cls), [128,128,128])
-        add_faces(fig, posx, '+x', color_rgb)
-        add_faces(fig, negx, '-x', color_rgb)
-        add_faces(fig, posy, '+y', color_rgb)
-        add_faces(fig, negy, '-y', color_rgb)
-        add_faces(fig, posz, '+z', color_rgb)
-        add_faces(fig, negz, '-z', color_rgb)
+    # Draw voxel cubes if available
+    if vox is not None and classes_to_draw:
+        for cls in classes_to_draw:
+            if not np.any(vox == cls):
+                continue
+            occ = (vox == cls)
+            posx, negx, posy, negy, posz, negz = exposed_face_masks(occ)
+            color_rgb = vox_dict.get(int(cls), [128,128,128])
+            add_faces(fig, posx, '+x', color_rgb)
+            add_faces(fig, negx, '-x', color_rgb)
+            add_faces(fig, posy, '+y', color_rgb)
+            add_faces(fig, negy, '-y', color_rgb)
+            add_faces(fig, posz, '+z', color_rgb)
+            add_faces(fig, negz, '-z', color_rgb)
+
+    # Building simulation mesh overlay
+    if building_sim_mesh is not None and getattr(building_sim_mesh, 'vertices', None) is not None:
+        Vb = np.asarray(building_sim_mesh.vertices)
+        Fb = np.asarray(building_sim_mesh.faces)
+
+        # Values can be stored in metadata under building_value_name
+        values = None
+        if hasattr(building_sim_mesh, 'metadata') and isinstance(building_sim_mesh.metadata, dict):
+            values = building_sim_mesh.metadata.get(building_value_name)
+        if values is not None:
+            values = np.asarray(values)
+
+        face_vals = None
+        if values is not None and values.size == len(Fb):
+            face_vals = values.astype(float)
+        elif values is not None and values.size == len(Vb):
+            vals_v = values.astype(float)
+            face_vals = np.nanmean(vals_v[Fb], axis=1)
+
+        facecolor = None
+        if face_vals is not None:
+            finite = np.isfinite(face_vals)
+            vmin_b = building_vmin if building_vmin is not None else (float(np.nanmin(face_vals[finite])) if np.any(finite) else 0.0)
+            vmax_b = building_vmax if building_vmax is not None else (float(np.nanmax(face_vals[finite])) if np.any(finite) else 1.0)
+            norm = mcolors.Normalize(vmin=vmin_b, vmax=vmax_b)
+            cmap = cm.get_cmap(building_colormap)
+            colors_rgba = np.zeros((len(Fb), 4), dtype=float)
+            colors_rgba[finite] = cmap(norm(face_vals[finite]))
+            nan_rgba = np.array(mcolors.to_rgba(building_nan_color))
+            colors_rgba[~finite] = nan_rgba
+            facecolor = [f"rgb({int(255*c[0])},{int(255*c[1])},{int(255*c[2])})" for c in colors_rgba]
+
+        if building_shaded:
+            lighting_b = dict(ambient=0.35, diffuse=1.0, specular=0.4, roughness=0.5, fresnel=0.1)
+            flat_b = False
+        else:
+            lighting_b = dict(ambient=1.0, diffuse=0.0, specular=0.0, roughness=0.0, fresnel=0.0)
+            flat_b = False
+
+        # Place a directional light near mesh center
+        cx = float((Vb[:,0].min() + Vb[:,0].max()) * 0.5)
+        cy = float((Vb[:,1].min() + Vb[:,1].max()) * 0.5)
+        cz = float((Vb[:,2].min() + Vb[:,2].max()) * 0.5)
+        lx = cx + (Vb[:,0].max() - Vb[:,0].min() + meshsize) * 0.9
+        ly = cy + (Vb[:,1].max() - Vb[:,1].min() + meshsize) * 0.6
+        lz = cz + (Vb[:,2].max() - Vb[:,2].min() + meshsize) * 1.4
+
+        fig.add_trace(
+            go.Mesh3d(
+                x=Vb[:,0], y=Vb[:,1], z=Vb[:,2],
+                i=Fb[:,0], j=Fb[:,1], k=Fb[:,2],
+                facecolor=facecolor if facecolor is not None else None,
+                color=None if facecolor is not None else 'rgb(200,200,200)',
+                opacity=float(building_opacity),
+                flatshading=flat_b,
+                lighting=lighting_b,
+                lightposition=dict(x=lx, y=ly, z=lz),
+                name=building_value_name if facecolor is not None else 'building_mesh'
+            )
+        )
+
+        # Colorbar for building overlay
+        if face_vals is not None:
+            colorscale_b = _mpl_cmap_to_plotly_colorscale(building_colormap)
+            fig.add_trace(
+                go.Scatter3d(
+                    x=[None], y=[None], z=[None],
+                    mode='markers',
+                    marker=dict(
+                        size=0.1,
+                        color=[vmin_b, vmax_b],
+                        colorscale=colorscale_b,
+                        cmin=vmin_b,
+                        cmax=vmax_b,
+                        colorbar=dict(title=building_value_name, len=0.5, y=0.8),
+                        showscale=True,
+                    ),
+                    showlegend=False,
+                    hoverinfo='skip',
+                )
+            )
+
+    # Ground simulation surface overlay
+    if ground_sim_grid is not None and ground_dem_grid is not None:
+        sim_vals = np.asarray(ground_sim_grid, dtype=float)
+        finite = np.isfinite(sim_vals)
+        vmin_g = ground_vmin if ground_vmin is not None else (float(np.nanmin(sim_vals[finite])) if np.any(finite) else 0.0)
+        vmax_g = ground_vmax if ground_vmax is not None else (float(np.nanmax(sim_vals[finite])) if np.any(finite) else 1.0)
+
+        # Determine z offset
+        z_off = ground_z_offset if ground_z_offset is not None else ground_view_point_height
+        try:
+            z_off = float(z_off) if z_off is not None else 1.5
+        except Exception:
+            z_off = 1.5
+        if meshsize is not None:
+            try:
+                ms = float(meshsize)
+                if z_off < ms:
+                    z_off = ms
+                z_off = ms * math.ceil(z_off / ms)
+            except Exception:
+                pass
+
+        # Normalize DEM so its minimum becomes 0, matching voxel Z coordinates
+        try:
+            dem_norm = np.asarray(ground_dem_grid, dtype=float)
+            dem_norm = dem_norm - np.nanmin(dem_norm)
+        except Exception:
+            dem_norm = ground_dem_grid
+
+        sim_mesh = create_sim_surface_mesh(
+            ground_sim_grid,
+            dem_norm,
+            meshsize=meshsize,
+            z_offset=z_off,
+            cmap_name=ground_colormap,
+            vmin=vmin_g,
+            vmax=vmax_g,
+        )
+
+        if sim_mesh is not None and getattr(sim_mesh, 'vertices', None) is not None:
+            V = np.asarray(sim_mesh.vertices)
+            F = np.asarray(sim_mesh.faces)
+
+            facecolor = None
+            try:
+                colors_rgba = np.asarray(sim_mesh.visual.face_colors)
+                if colors_rgba.ndim == 2 and colors_rgba.shape[0] == len(F):
+                    facecolor = [f"rgb({int(c[0])},{int(c[1])},{int(c[2])})" for c in colors_rgba]
+            except Exception:
+                facecolor = None
+
+            if ground_shaded:
+                lighting = dict(ambient=0.35, diffuse=1.0, specular=0.4, roughness=0.5, fresnel=0.1)
+                flat = False
+            else:
+                lighting = dict(ambient=1.0, diffuse=0.0, specular=0.0, roughness=0.0, fresnel=0.0)
+                flat = False
+
+            cx = float((V[:,0].min() + V[:,0].max()) * 0.5)
+            cy = float((V[:,1].min() + V[:,1].max()) * 0.5)
+            cz = float((V[:,2].min() + V[:,2].max()) * 0.5)
+            lx = cx + (V[:,0].max() - V[:,0].min() + meshsize) * 0.9
+            ly = cy + (V[:,1].max() - V[:,1].min() + meshsize) * 0.6
+            lz = cz + (V[:,2].max() - V[:,2].min() + meshsize) * 1.4
+
+            fig.add_trace(
+                go.Mesh3d(
+                    x=V[:,0], y=V[:,1], z=V[:,2],
+                    i=F[:,0], j=F[:,1], k=F[:,2],
+                    facecolor=facecolor,
+                    color=None if facecolor is not None else 'rgb(200,200,200)',
+                    opacity=float(sim_surface_opacity),
+                    flatshading=flat,
+                    lighting=lighting,
+                    lightposition=dict(x=lx, y=ly, z=lz),
+                    name='sim_surface'
+                )
+            )
+
+            # Colorbar for ground overlay
+            colorscale_g = _mpl_cmap_to_plotly_colorscale(ground_colormap)
+            fig.add_trace(
+                go.Scatter3d(
+                    x=[None], y=[None], z=[None],
+                    mode='markers',
+                    marker=dict(
+                        size=0.1,
+                        color=[vmin_g, vmax_g],
+                        colorscale=colorscale_g,
+                        cmin=vmin_g,
+                        cmax=vmax_g,
+                        colorbar=dict(title='ground', len=0.5, y=0.2),
+                        showscale=True,
+                    ),
+                    showlegend=False,
+                    hoverinfo='skip',
+                )
+            )
 
     fig.update_layout(
-        title=title or "VoxCity 3D (Voxel Cubes)",
+        title=title or "VoxCity 3D",
         width=width,
         height=height,
         scene=dict(

{voxcity-0.6.22.dist-info → voxcity-0.6.24.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: voxcity
-Version: 0.6.22
+Version: 0.6.24
 Summary: voxcity is an easy and one-stop tool to output 3d city models for microclimate simulation by integrating multiple geospatial open-data
 License: MIT
 License-File: AUTHORS.rst

{voxcity-0.6.22.dist-info → voxcity-0.6.24.dist-info}/RECORD

@@ -29,10 +29,10 @@ voxcity/simulator/view.py,sha256=k3FoS6gsibR-eDrTHJivJSQfvN3Tg8R8eSTeMqd9ans,939
 voxcity/utils/__init__.py,sha256=Q-NYCqYnAAaF80KuNwpqIjbE7Ec3Gr4y_khMLIMhJrg,68
 voxcity/utils/lc.py,sha256=722Gz3lPbgAp0mmTZ-g-QKBbAnbxrcgaYwb1sa7q8Sk,16189
 voxcity/utils/material.py,sha256=H8K8Lq4wBL6dQtgj7esUW2U6wLCOTeOtelkTDJoRgMo,10007
-voxcity/utils/visualization.py,sha256=kccIndyz3idTTSVMwGgniQ7zFuKLRRnOP4pgyn1xs20,109849
+voxcity/utils/visualization.py,sha256=V2JPKuZktAby90dhMHbR2XUeLETdW75hGTk7a9yfGow,121404
 voxcity/utils/weather.py,sha256=cb6ZooL42Hc4214OtFiJ78cCgWYM6VE-DU8S3e-urRg,48449
-voxcity-0.6.22.dist-info/licenses/AUTHORS.rst,sha256=m82vkI5QokEGdcHof2OxK39lf81w1P58kG9ZNNAKS9U,175
-voxcity-0.6.22.dist-info/licenses/LICENSE,sha256=s_jE1Df1nTPL4A_5GCGic5Zwex0CVaPKcAmSilxJPPE,1089
-voxcity-0.6.22.dist-info/METADATA,sha256=DB0CXRCCFsr_THg8zt7BcGF-2GtXlBMzHFdKAES6jC0,26227
-voxcity-0.6.22.dist-info/WHEEL,sha256=M5asmiAlL6HEcOq52Yi5mmk9KmTVjY2RDPtO4p9DMrc,88
-voxcity-0.6.22.dist-info/RECORD,,
+voxcity-0.6.24.dist-info/licenses/AUTHORS.rst,sha256=m82vkI5QokEGdcHof2OxK39lf81w1P58kG9ZNNAKS9U,175
+voxcity-0.6.24.dist-info/licenses/LICENSE,sha256=s_jE1Df1nTPL4A_5GCGic5Zwex0CVaPKcAmSilxJPPE,1089
+voxcity-0.6.24.dist-info/METADATA,sha256=mr-_UullzXE8hCCq_YHpZOGEH5p3bEreSIHrWLia41g,26227
+voxcity-0.6.24.dist-info/WHEEL,sha256=zp0Cn7JsFoX2ATtOhtaFYIiE2rmFAD4OcMhtUki8W3U,88
+voxcity-0.6.24.dist-info/RECORD,,

{voxcity-0.6.22.dist-info → voxcity-0.6.24.dist-info}/WHEEL

@@ -1,4 +1,4 @@
 Wheel-Version: 1.0
-Generator: poetry-core 2.2.0
+Generator: poetry-core 2.2.1
 Root-Is-Purelib: true
 Tag: py3-none-any