valkey-glide 2.2.1rc3__cp314-cp314-macosx_11_0_arm64.whl

glide_shared/config.py

@@ -0,0 +1,975 @@
+# Copyright Valkey GLIDE Project Contributors - SPDX Identifier: Apache-2.0
+
+from __future__ import annotations
+
+from dataclasses import dataclass
+from enum import Enum, IntEnum
+from typing import Any, Callable, Dict, List, Optional, Set, Tuple, Union
+
+from glide_shared.commands.core_options import PubSubMsg
+from glide_shared.exceptions import ConfigurationError
+from glide_shared.protobuf.connection_request_pb2 import (
+    ConnectionRequest,
+)
+from glide_shared.protobuf.connection_request_pb2 import (
+    ProtocolVersion as SentProtocolVersion,
+)
+from glide_shared.protobuf.connection_request_pb2 import ReadFrom as ProtobufReadFrom
+from glide_shared.protobuf.connection_request_pb2 import (
+    TlsMode,
+)
+
+
+class NodeAddress:
+    """
+    Represents the address and port of a node in the cluster.
+
+    Attributes:
+        host (str, optional): The server host. Defaults to "localhost".
+        port (int, optional): The server port. Defaults to 6379.
+    """
+
+    def __init__(self, host: str = "localhost", port: int = 6379):
+        self.host = host
+        self.port = port
+
+
+class ReadFrom(Enum):
+    """
+    Represents the client's read from strategy.
+    """
+
+    PRIMARY = ProtobufReadFrom.Primary
+    """
+    Always get from primary, in order to get the freshest data.
+    """
+    PREFER_REPLICA = ProtobufReadFrom.PreferReplica
+    """
+    Spread the requests between all replicas in a round robin manner.
+    If no replica is available, route the requests to the primary.
+    """
+    AZ_AFFINITY = ProtobufReadFrom.AZAffinity
+    """
+    Spread the read requests between replicas in the same client's AZ (Aviliablity zone) in a round robin manner,
+    falling back to other replicas or the primary if needed
+    """
+    AZ_AFFINITY_REPLICAS_AND_PRIMARY = ProtobufReadFrom.AZAffinityReplicasAndPrimary
+    """
+    Spread the read requests among nodes within the client's Availability Zone (AZ) in a round robin manner,
+    prioritizing local replicas, then the local primary, and falling back to any replica or the primary if needed.
+    """
+
+
+class ProtocolVersion(Enum):
+    """
+    Represents the communication protocol with the server.
+    """
+
+    RESP2 = SentProtocolVersion.RESP2
+    """
+    Communicate using RESP2.
+    """
+    RESP3 = SentProtocolVersion.RESP3
+    """
+    Communicate using RESP3.
+    """
+
+
+class BackoffStrategy:
+    """
+    Represents the strategy used to determine how and when to reconnect, in case of connection failures.
+    The time between attempts grows exponentially, to the formula rand(0 .. factor * (exponentBase ^ N)), where N
+    is the number of failed attempts, and rand(...) applies a jitter of up to jitter_percent% to introduce randomness and reduce retry storms.
+    Once the maximum value is reached, that will remain the time between retry attempts until a reconnect attempt is
+    successful.
+    The client will attempt to reconnect indefinitely.
+
+    Attributes:
+        num_of_retries (int): Number of retry attempts that the client should perform when disconnected from the server,
+            where the time between retries increases. Once the retries have reached the maximum value, the time between
+            retries will remain constant until a reconnect attempt is succesful.
+        factor (int): The multiplier that will be applied to the waiting time between each retry.
+            This value is specified in milliseconds.
+        exponent_base (int): The exponent base configured for the strategy.
+        jitter_percent (Optional[int]): The Jitter percent on the calculated duration. If not set, a default value will be used.
+    """
+
+    def __init__(
+        self,
+        num_of_retries: int,
+        factor: int,
+        exponent_base: int,
+        jitter_percent: Optional[int] = None,
+    ):
+        self.num_of_retries = num_of_retries
+        self.factor = factor
+        self.exponent_base = exponent_base
+        self.jitter_percent = jitter_percent
+
+
+class ServiceType(Enum):
+    """
+    Represents the types of AWS services that can be used for IAM authentication.
+    """
+
+    ELASTICACHE = 0
+    """Amazon ElastiCache service."""
+    MEMORYDB = 1
+    """Amazon MemoryDB service."""
+
+
+class IamAuthConfig:
+    """
+    Configuration settings for IAM authentication.
+
+    Attributes:
+        cluster_name (str): The name of the ElastiCache/MemoryDB cluster.
+        service (ServiceType): The type of service being used (ElastiCache or MemoryDB).
+        region (str): The AWS region where the ElastiCache/MemoryDB cluster is located.
+        refresh_interval_seconds (Optional[int]): Optional refresh interval in seconds for renewing IAM authentication tokens.
+            If not provided, the core will use a default value of 300 seconds (5 min).
+    """
+
+    def __init__(
+        self,
+        cluster_name: str,
+        service: ServiceType,
+        region: str,
+        refresh_interval_seconds: Optional[int] = None,
+    ):
+        self.cluster_name = cluster_name
+        self.service = service
+        self.region = region
+        self.refresh_interval_seconds = refresh_interval_seconds
+
+
+class ServerCredentials:
+    """
+    Represents the credentials for connecting to a server.
+
+    Exactly one of the following authentication modes must be provided:
+        - Password-based authentication: Use password (and optionally username)
+        - IAM authentication: Use username (required) and iam_config
+
+    These modes are mutually exclusive - you cannot use both simultaneously.
+
+    Attributes:
+        password (Optional[str]): The password that will be used for authenticating connections to the servers.
+            Mutually exclusive with iam_config. Either password or iam_config must be provided.
+        username (Optional[str]): The username that will be used for authenticating connections to the servers.
+            If not supplied for password-based authentication, "default" will be used.
+            Required for IAM authentication.
+        iam_config (Optional[IamAuthConfig]): IAM authentication configuration. Mutually exclusive with password.
+            Either password or iam_config must be provided.
+            The client will automatically generate and refresh the authentication token based on the provided configuration.
+    """
+
+    def __init__(
+        self,
+        password: Optional[str] = None,
+        username: Optional[str] = None,
+        iam_config: Optional[IamAuthConfig] = None,
+    ):
+        # Validate mutual exclusivity
+        if password is not None and iam_config is not None:
+            raise ConfigurationError(
+                "password and iam_config are mutually exclusive. Use either password-based or IAM authentication, not both."
+            )
+
+        # Validate IAM requires username
+        if iam_config is not None and not username:
+            raise ConfigurationError("username is required for IAM authentication.")
+
+        # At least one authentication method must be provided
+        if password is None and iam_config is None:
+            raise ConfigurationError(
+                "Either password or iam_config must be provided for authentication."
+            )
+
+        self.password = password
+        self.username = username
+        self.iam_config = iam_config
+
+    def is_iam_auth(self) -> bool:
+        """Returns True if this credential is configured for IAM authentication."""
+        return self.iam_config is not None
+
+
+class PeriodicChecksManualInterval:
+    """
+    Represents a manually configured interval for periodic checks.
+
+    Attributes:
+        duration_in_sec (int): The duration in seconds for the interval between periodic checks.
+    """
+
+    def __init__(self, duration_in_sec: int) -> None:
+        self.duration_in_sec = duration_in_sec
+
+
+class PeriodicChecksStatus(Enum):
+    """
+    Represents the cluster's periodic checks status.
+    To configure specific interval, see PeriodicChecksManualInterval.
+    """
+
+    ENABLED_DEFAULT_CONFIGS = 0
+    """
+    Enables the periodic checks with the default configurations.
+    """
+    DISABLED = 1
+    """
+    Disables the periodic checks.
+    """
+
+
+class TlsAdvancedConfiguration:
+    """
+    Represents advanced TLS configuration settings.
+
+    Attributes:
+        use_insecure_tls (Optional[bool]): Whether to bypass TLS certificate verification.
+
+            - When set to True, the client skips certificate validation.
+              This is useful when connecting to servers or clusters using self-signed certificates,
+              or when DNS entries (e.g., CNAMEs) don't match certificate hostnames.
+
+            - This setting is typically used in development or testing environments. **It is
+              strongly discouraged in production**, as it introduces security risks such as man-in-the-middle attacks.
+
+            - Only valid if TLS is already enabled in the base client configuration.
+              Enabling it without TLS will result in a `ConfigurationError`.
+
+            - Default: False (verification is enforced).
+
+        root_pem_cacerts (Optional[bytes]): Custom root certificate data for TLS connections in PEM format.
+
+            - When provided, these certificates will be used instead of the system's default trust store.
+              This is useful for connecting to servers with self-signed certificates or corporate
+              certificate authorities.
+
+            - If set to an empty bytes object (non-None but length 0), a `ConfigurationError` will be raised.
+
+            - If None (default), the system's default certificate trust store will be used (platform verifier).
+
+            - The certificate data should be in PEM format as a bytes object.
+
+            - Multiple certificates can be provided by concatenating them in PEM format.
+
+            Example usage::
+
+                # Load from file
+                with open('/path/to/ca-cert.pem', 'rb') as f:
+                    cert_data = f.read()
+                tls_config = TlsAdvancedConfiguration(root_pem_cacerts=cert_data)
+
+                # Or provide directly
+                cert_data = b"-----BEGIN CERTIFICATE-----\\n...\\n-----END CERTIFICATE-----"
+                tls_config = TlsAdvancedConfiguration(root_pem_cacerts=cert_data)
+    """
+
+    def __init__(
+        self,
+        use_insecure_tls: Optional[bool] = None,
+        root_pem_cacerts: Optional[bytes] = None,
+    ):
+        self.use_insecure_tls = use_insecure_tls
+        self.root_pem_cacerts = root_pem_cacerts
+
+
+class AdvancedBaseClientConfiguration:
+    """
+    Represents the advanced configuration settings for a base Glide client.
+
+    Attributes:
+        connection_timeout (Optional[int]): The duration in milliseconds to wait for a TCP/TLS connection to complete.
+            This applies both during initial client creation and any reconnection that may occur during request processing.
+            **Note**: A high connection timeout may lead to prolonged blocking of the entire command pipeline.
+            If not explicitly set, a default value of 2000 milliseconds will be used.
+        tls_config (Optional[TlsAdvancedConfiguration]): The advanced TLS configuration settings.
+            This allows for more granular control of TLS behavior, such as enabling an insecure mode
+            that bypasses certificate validation.
+    """
+
+    def __init__(
+        self,
+        connection_timeout: Optional[int] = None,
+        tls_config: Optional[TlsAdvancedConfiguration] = None,
+    ):
+        self.connection_timeout = connection_timeout
+        self.tls_config = tls_config
+
+    def _create_a_protobuf_conn_request(
+        self, request: ConnectionRequest
+    ) -> ConnectionRequest:
+        if self.connection_timeout:
+            request.connection_timeout = self.connection_timeout
+
+        if self.tls_config:
+            if self.tls_config.use_insecure_tls:
+                # Validate that TLS is enabled before allowing insecure mode
+                if request.tls_mode == TlsMode.NoTls:
+                    raise ConfigurationError(
+                        "use_insecure_tls cannot be enabled when use_tls is disabled."
+                    )
+
+                # Override the default SecureTls mode to InsecureTls when user explicitly requests it
+                request.tls_mode = TlsMode.InsecureTls
+
+            # Handle root certificates
+            if self.tls_config.root_pem_cacerts is not None:
+                if len(self.tls_config.root_pem_cacerts) == 0:
+                    raise ConfigurationError(
+                        "root_pem_cacerts cannot be an empty bytes object; use None to use platform verifier"
+                    )
+                request.root_certs.append(self.tls_config.root_pem_cacerts)
+
+        return request
+
+
+class BaseClientConfiguration:
+    """
+    Represents the configuration settings for a Glide client.
+
+    Attributes:
+        addresses (List[NodeAddress]): DNS Addresses and ports of known nodes in the cluster.
+            If the server is in cluster mode the list can be partial, as the client will attempt to map out
+            the cluster and find all nodes.
+            If the server is in standalone mode, only nodes whose addresses were provided will be used by the
+            client.
+            For example::
+
+                [
+                    NodeAddress("sample-address-0001.use1.cache.amazonaws.com", 6379),
+                    NodeAddress("sample-address-0002.use1.cache.amazonaws.com", 6379)
+                ]
+
+        use_tls (bool): True if communication with the cluster should use Transport Level Security.
+            Should match the TLS configuration of the server/cluster, otherwise the connection attempt will fail.
+            For advanced tls configuration, please use `AdvancedBaseClientConfiguration`.
+        credentials (ServerCredentials): Credentials for authentication process.
+            If none are set, the client will not authenticate itself with the server.
+        read_from (ReadFrom): If not set, `PRIMARY` will be used.
+        request_timeout (Optional[int]): The duration in milliseconds that the client should wait for a request to
+            complete.
+            This duration encompasses sending the request, awaiting for a response from the server, and any required
+            reconnection or retries.
+            If the specified timeout is exceeded for a pending request, it will result in a timeout error. If not
+            explicitly set, a default value of 250 milliseconds will be used.
+        reconnect_strategy (Optional[BackoffStrategy]): Strategy used to determine how and when to reconnect, in case of
+            connection failures.
+            If not set, a default backoff strategy will be used.
+        database_id (Optional[int]): Index of the logical database to connect to.
+            Must be a non-negative integer.If not set, the client will connect to database 0.
+        client_name (Optional[str]): Client name to be used for the client. Will be used with CLIENT SETNAME command
+            during connection establishment.
+        protocol (ProtocolVersion): Serialization protocol to be used. If not set, `RESP3` will be used.
+        inflight_requests_limit (Optional[int]): The maximum number of concurrent requests allowed to be in-flight
+            (sent but not yet completed).
+            This limit is used to control the memory usage and prevent the client from overwhelming the server or getting
+            stuck in case of a queue backlog.
+            If not set, a default value will be used.
+        client_az (Optional[str]): Availability Zone of the client.
+            If ReadFrom strategy is AZAffinity, this setting ensures that readonly commands are directed to replicas
+            within the specified AZ if exits.
+            If ReadFrom strategy is AZAffinityReplicasAndPrimary, this setting ensures that readonly commands are directed
+            to nodes (first replicas then primary) within the specified AZ if they exist.
+        advanced_config (Optional[AdvancedBaseClientConfiguration]): Advanced configuration settings for the client.
+
+        lazy_connect (Optional[bool]): Enables lazy connection mode, where physical connections to the server(s)
+            are deferred until the first command is sent. This can reduce startup latency and allow for client
+            creation in disconnected environments.
+
+            When set to `True`, the client will not attempt to connect to the specified nodes during
+            initialization. Instead, connections will be established only when a command is actually executed.
+
+            Note that the first command executed with lazy connections may experience additional latency
+            as it needs to establish the connection first. During this initial connection, the standard
+            request timeout does not apply yet - instead, the connection establishment is governed by
+            `AdvancedBaseClientConfiguration.connection_timeout`. The request timeout (`request_timeout`)
+            only begins counting after the connection has been successfully established. This behavior
+            can effectively increase the total time needed for the first command to complete.
+
+            This setting applies to both standalone and cluster modes. Note that if an operation is
+            attempted and connection fails (e.g., unreachable nodes), errors will surface at that point.
+
+            If not set, connections are established immediately during client creation (equivalent to `False`).
+    """
+
+    def __init__(
+        self,
+        addresses: List[NodeAddress],
+        use_tls: bool = False,
+        credentials: Optional[ServerCredentials] = None,
+        read_from: ReadFrom = ReadFrom.PRIMARY,
+        request_timeout: Optional[int] = None,
+        reconnect_strategy: Optional[BackoffStrategy] = None,
+        database_id: Optional[int] = None,
+        client_name: Optional[str] = None,
+        protocol: ProtocolVersion = ProtocolVersion.RESP3,
+        inflight_requests_limit: Optional[int] = None,
+        client_az: Optional[str] = None,
+        advanced_config: Optional[AdvancedBaseClientConfiguration] = None,
+        lazy_connect: Optional[bool] = None,
+    ):
+        self.addresses = addresses
+        self.use_tls = use_tls
+        self.credentials = credentials
+        self.read_from = read_from
+        self.request_timeout = request_timeout
+        self.reconnect_strategy = reconnect_strategy
+        self.database_id = database_id
+        self.client_name = client_name
+        self.protocol = protocol
+        self.inflight_requests_limit = inflight_requests_limit
+        self.client_az = client_az
+        self.advanced_config = advanced_config
+        self.lazy_connect = lazy_connect
+
+        if read_from == ReadFrom.AZ_AFFINITY and not client_az:
+            raise ValueError(
+                "client_az must be set when read_from is set to AZ_AFFINITY"
+            )
+
+        if read_from == ReadFrom.AZ_AFFINITY_REPLICAS_AND_PRIMARY and not client_az:
+            raise ValueError(
+                "client_az must be set when read_from is set to AZ_AFFINITY_REPLICAS_AND_PRIMARY"
+            )
+
+    def _set_addresses_in_request(self, request: ConnectionRequest) -> None:
+        """Set addresses in the protobuf request."""
+        for address in self.addresses:
+            address_info = request.addresses.add()
+            address_info.host = address.host
+            address_info.port = address.port
+
+    def _set_reconnect_strategy_in_request(self, request: ConnectionRequest) -> None:
+        """Set reconnect strategy in the protobuf request."""
+        if not self.reconnect_strategy:
+            return
+
+        request.connection_retry_strategy.number_of_retries = (
+            self.reconnect_strategy.num_of_retries
+        )
+        request.connection_retry_strategy.factor = self.reconnect_strategy.factor
+        request.connection_retry_strategy.exponent_base = (
+            self.reconnect_strategy.exponent_base
+        )
+        if self.reconnect_strategy.jitter_percent is not None:
+            request.connection_retry_strategy.jitter_percent = (
+                self.reconnect_strategy.jitter_percent
+            )
+
+    def _set_credentials_in_request(self, request: ConnectionRequest) -> None:
+        """Set credentials in the protobuf request."""
+        if not self.credentials:
+            return
+
+        if self.credentials.username:
+            request.authentication_info.username = self.credentials.username
+
+        if self.credentials.password:
+            request.authentication_info.password = self.credentials.password
+
+        # Set IAM credentials if present
+        if self.credentials.iam_config:
+            iam_config = self.credentials.iam_config
+            request.authentication_info.iam_credentials.cluster_name = (
+                iam_config.cluster_name
+            )
+            request.authentication_info.iam_credentials.region = iam_config.region
+
+            # Map ServiceType enum to protobuf ServiceType
+            if iam_config.service == ServiceType.ELASTICACHE:
+                from glide_shared.protobuf.connection_request_pb2 import (
+                    ServiceType as ProtobufServiceType,
+                )
+
+                request.authentication_info.iam_credentials.service_type = (
+                    ProtobufServiceType.ELASTICACHE
+                )
+            elif iam_config.service == ServiceType.MEMORYDB:
+                from glide_shared.protobuf.connection_request_pb2 import (
+                    ServiceType as ProtobufServiceType,
+                )
+
+                request.authentication_info.iam_credentials.service_type = (
+                    ProtobufServiceType.MEMORYDB
+                )
+
+            # Set optional refresh interval
+            if iam_config.refresh_interval_seconds is not None:
+                request.authentication_info.iam_credentials.refresh_interval_seconds = (
+                    iam_config.refresh_interval_seconds
+                )
+
+    def _create_a_protobuf_conn_request(
+        self, cluster_mode: bool = False
+    ) -> ConnectionRequest:
+        """
+        Generates a Protobuf ConnectionRequest using the values from this ClientConfiguration.
+
+        Args:
+            cluster_mode (bool, optional): The cluster mode of the client. Defaults to False.
+
+        Returns:
+            ConnectionRequest: Protobuf ConnectionRequest.
+        """
+        request = ConnectionRequest()
+
+        # Set basic configuration
+        self._set_addresses_in_request(request)
+        request.tls_mode = TlsMode.SecureTls if self.use_tls else TlsMode.NoTls
+        request.read_from = self.read_from.value
+        request.cluster_mode_enabled = cluster_mode
+        request.protocol = self.protocol.value
+
+        # Set optional configuration
+        if self.request_timeout:
+            request.request_timeout = self.request_timeout
+
+        self._set_reconnect_strategy_in_request(request)
+        self._set_credentials_in_request(request)
+
+        if self.client_name:
+            request.client_name = self.client_name
+        if self.inflight_requests_limit:
+            request.inflight_requests_limit = self.inflight_requests_limit
+        if self.client_az:
+            request.client_az = self.client_az
+        if self.database_id is not None:
+            request.database_id = self.database_id
+        if self.advanced_config:
+            self.advanced_config._create_a_protobuf_conn_request(request)
+        if self.lazy_connect is not None:
+            request.lazy_connect = self.lazy_connect
+
+        return request
+
+    def _is_pubsub_configured(self) -> bool:
+        return False
+
+    def _get_pubsub_callback_and_context(
+        self,
+    ) -> Tuple[Optional[Callable[[PubSubMsg, Any], None]], Any]:
+        return None, None
+
+
+class AdvancedGlideClientConfiguration(AdvancedBaseClientConfiguration):
+    """
+    Represents the advanced configuration settings for a Standalone Glide client.
+    """
+
+    def __init__(
+        self,
+        connection_timeout: Optional[int] = None,
+        tls_config: Optional[TlsAdvancedConfiguration] = None,
+    ):
+
+        super().__init__(connection_timeout, tls_config)
+
+
+class GlideClientConfiguration(BaseClientConfiguration):
+    """
+    Represents the configuration settings for a Standalone Glide client.
+
+    Attributes:
+        addresses (List[NodeAddress]): DNS Addresses and ports of known nodes in the cluster.
+            Only nodes whose addresses were provided will be used by the client.
+            For example::
+
+                [
+                    NodeAddress("sample-address-0001.use1.cache.amazonaws.com", 6379),
+                    NodeAddress("sample-address-0002.use1.cache.amazonaws.com", 6379)
+                ]
+
+        use_tls (bool): True if communication with the cluster should use Transport Level Security.
+                Please use `AdvancedGlideClusterClientConfiguration`.
+        credentials (ServerCredentials): Credentials for authentication process.
+                If none are set, the client will not authenticate itself with the server.
+        read_from (ReadFrom): If not set, `PRIMARY` will be used.
+        request_timeout (Optional[int]):  The duration in milliseconds that the client should wait for a request to complete.
+                This duration encompasses sending the request, awaiting for a response from the server, and any required
+                reconnection or retries.
+                If the specified timeout is exceeded for a pending request, it will result in a timeout error.
+                If not explicitly set, a default value of 250 milliseconds will be used.
+        reconnect_strategy (Optional[BackoffStrategy]): Strategy used to determine how and when to reconnect, in case of
+            connection failures.
+            If not set, a default backoff strategy will be used.
+        database_id (Optional[int]): Index of the logical database to connect to.
+        client_name (Optional[str]): Client name to be used for the client. Will be used with CLIENT SETNAME command during
+            connection establishment.
+        protocol (ProtocolVersion): The version of the RESP protocol to communicate with the server.
+        pubsub_subscriptions (Optional[GlideClientConfiguration.PubSubSubscriptions]): Pubsub subscriptions to be used for the
+                client.
+                Will be applied via SUBSCRIBE/PSUBSCRIBE commands during connection establishment.
+        inflight_requests_limit (Optional[int]): The maximum number of concurrent requests allowed to be in-flight
+            (sent but not yet completed).
+            This limit is used to control the memory usage and prevent the client from overwhelming the server or getting
+            stuck in case of a queue backlog.
+            If not set, a default value will be used.
+        client_az (Optional[str]): Availability Zone of the client.
+            If ReadFrom strategy is AZAffinity, this setting ensures that readonly commands are directed to replicas within
+            the specified AZ if exits.
+            If ReadFrom strategy is AZAffinityReplicasAndPrimary, this setting ensures that readonly commands are directed to
+            nodes (first replicas then primary) within the specified AZ if they exist.
+        advanced_config (Optional[AdvancedGlideClientConfiguration]): Advanced configuration settings for the client,
+            see `AdvancedGlideClientConfiguration`.
+    """
+
+    class PubSubChannelModes(IntEnum):
+        """
+        Describes pubsub subsciption modes.
+        See [valkey.io](https://valkey.io/docs/topics/pubsub/) for more details
+        """
+
+        Exact = 0
+        """ Use exact channel names """
+        Pattern = 1
+        """ Use channel name patterns """
+
+    @dataclass
+    class PubSubSubscriptions:
+        """Describes pubsub configuration for standalone mode client.
+
+        Attributes:
+            channels_and_patterns (Dict[GlideClientConfiguration.PubSubChannelModes, Set[str]]):
+                Channels and patterns by modes.
+            callback (Optional[Callable[[PubSubMsg, Any], None]]):
+                Optional callback to accept the incomming messages.
+            context (Any):
+                Arbitrary context to pass to the callback.
+        """
+
+        channels_and_patterns: Dict[
+            GlideClientConfiguration.PubSubChannelModes, Set[str]
+        ]
+        callback: Optional[Callable[[PubSubMsg, Any], None]]
+        context: Any
+
+    def __init__(
+        self,
+        addresses: List[NodeAddress],
+        use_tls: bool = False,
+        credentials: Optional[ServerCredentials] = None,
+        read_from: ReadFrom = ReadFrom.PRIMARY,
+        request_timeout: Optional[int] = None,
+        reconnect_strategy: Optional[BackoffStrategy] = None,
+        database_id: Optional[int] = None,
+        client_name: Optional[str] = None,
+        protocol: ProtocolVersion = ProtocolVersion.RESP3,
+        pubsub_subscriptions: Optional[PubSubSubscriptions] = None,
+        inflight_requests_limit: Optional[int] = None,
+        client_az: Optional[str] = None,
+        advanced_config: Optional[AdvancedGlideClientConfiguration] = None,
+        lazy_connect: Optional[bool] = None,
+    ):
+        super().__init__(
+            addresses=addresses,
+            use_tls=use_tls,
+            credentials=credentials,
+            read_from=read_from,
+            request_timeout=request_timeout,
+            reconnect_strategy=reconnect_strategy,
+            database_id=database_id,
+            client_name=client_name,
+            protocol=protocol,
+            inflight_requests_limit=inflight_requests_limit,
+            client_az=client_az,
+            advanced_config=advanced_config,
+            lazy_connect=lazy_connect,
+        )
+        self.pubsub_subscriptions = pubsub_subscriptions
+
+    def _create_a_protobuf_conn_request(
+        self, cluster_mode: bool = False
+    ) -> ConnectionRequest:
+        assert cluster_mode is False
+        request = super()._create_a_protobuf_conn_request(cluster_mode)
+
+        if self.pubsub_subscriptions:
+            if self.protocol == ProtocolVersion.RESP2:
+                raise ConfigurationError(
+                    "PubSub subscriptions require RESP3 protocol, but RESP2 was configured."
+                )
+            if (
+                self.pubsub_subscriptions.context is not None
+                and not self.pubsub_subscriptions.callback
+            ):
+                raise ConfigurationError(
+                    "PubSub subscriptions with a context require a callback function to be configured."
+                )
+            for (
+                channel_type,
+                channels_patterns,
+            ) in self.pubsub_subscriptions.channels_and_patterns.items():
+                entry = request.pubsub_subscriptions.channels_or_patterns_by_type[
+                    int(channel_type)
+                ]
+                for channel_pattern in channels_patterns:
+                    entry.channels_or_patterns.append(str.encode(channel_pattern))
+
+        return request
+
+    def _is_pubsub_configured(self) -> bool:
+        return self.pubsub_subscriptions is not None
+
+    def _get_pubsub_callback_and_context(
+        self,
+    ) -> Tuple[Optional[Callable[[PubSubMsg, Any], None]], Any]:
+        if self.pubsub_subscriptions:
+            return self.pubsub_subscriptions.callback, self.pubsub_subscriptions.context
+        return None, None
+
+
+class AdvancedGlideClusterClientConfiguration(AdvancedBaseClientConfiguration):
+    """
+    Represents the advanced configuration settings for a Glide Cluster client.
+
+    Attributes:
+        connection_timeout (Optional[int]): The duration in milliseconds to wait for a TCP/TLS connection to complete.
+            This applies both during initial client creation and any reconnection that may occur during request processing.
+            **Note**: A high connection timeout may lead to prolonged blocking of the entire command pipeline.
+            If not explicitly set, a default value of 2000 milliseconds will be used.
+        tls_config (Optional[TlsAdvancedConfiguration]): The advanced TLS configuration settings.
+            This allows for more granular control of TLS behavior, such as enabling an insecure mode
+            that bypasses certificate validation.
+        refresh_topology_from_initial_nodes (bool): Enables refreshing the cluster topology using only the initial nodes.
+            When this option is enabled, all topology updates (both the periodic checks and on-demand refreshes
+            triggered by topology changes) will query only the initial nodes provided when creating the client, rather than using the internal cluster view.
+    """
+
+    def __init__(
+        self,
+        connection_timeout: Optional[int] = None,
+        tls_config: Optional[TlsAdvancedConfiguration] = None,
+        refresh_topology_from_initial_nodes: bool = False,
+    ):
+        super().__init__(connection_timeout, tls_config)
+        self.refresh_topology_from_initial_nodes = refresh_topology_from_initial_nodes
+
+    def _create_a_protobuf_conn_request(
+        self, request: ConnectionRequest
+    ) -> ConnectionRequest:
+        super()._create_a_protobuf_conn_request(request)
+
+        request.refresh_topology_from_initial_nodes = (
+            self.refresh_topology_from_initial_nodes
+        )
+        return request
+
+
+class GlideClusterClientConfiguration(BaseClientConfiguration):
+    """
+    Represents the configuration settings for a Cluster Glide client.
+
+    Attributes:
+        addresses (List[NodeAddress]): DNS Addresses and ports of known nodes in the cluster.
+            The list can be partial, as the client will attempt to map out the cluster and find all nodes.
+            For example::
+
+                [
+                    NodeAddress("sample-address-0001.use1.cache.amazonaws.com", 6379),
+                ]
+
+        use_tls (bool): True if communication with the cluster should use Transport Level Security.
+                For advanced tls configuration, please use `AdvancedGlideClusterClientConfiguration`.
+        credentials (ServerCredentials): Credentials for authentication process.
+                If none are set, the client will not authenticate itself with the server.
+        read_from (ReadFrom): If not set, `PRIMARY` will be used.
+        request_timeout (Optional[int]):  The duration in milliseconds that the client should wait for a request to complete.
+            This duration encompasses sending the request, awaiting for a response from the server, and any required
+            reconnection or retries.
+            If the specified timeout is exceeded for a pending request, it will result in a timeout error. If not explicitly
+            set, a default value of 250 milliseconds will be used.
+        reconnect_strategy (Optional[BackoffStrategy]): Strategy used to determine how and when to reconnect, in case of
+            connection failures.
+            If not set, a default backoff strategy will be used.
+        database_id (Optional[int]): Index of the logical database to connect to.
+        client_name (Optional[str]): Client name to be used for the client. Will be used with CLIENT SETNAME command during
+            connection establishment.
+        protocol (ProtocolVersion): The version of the RESP protocol to communicate with the server.
+        periodic_checks (Union[PeriodicChecksStatus, PeriodicChecksManualInterval]): Configure the periodic topology checks.
+            These checks evaluate changes in the cluster's topology, triggering a slot refresh when detected.
+            Periodic checks ensure a quick and efficient process by querying a limited number of nodes.
+            Defaults to PeriodicChecksStatus.ENABLED_DEFAULT_CONFIGS.
+        pubsub_subscriptions (Optional[GlideClusterClientConfiguration.PubSubSubscriptions]): Pubsub subscriptions to be used
+            for the client.
+            Will be applied via SUBSCRIBE/PSUBSCRIBE/SSUBSCRIBE commands during connection establishment.
+        inflight_requests_limit (Optional[int]): The maximum number of concurrent requests allowed to be in-flight
+            (sent but not yet completed).
+            This limit is used to control the memory usage and prevent the client from overwhelming the server or getting
+            stuck in case of a queue backlog.
+            If not set, a default value will be used.
+        client_az (Optional[str]): Availability Zone of the client.
+            If ReadFrom strategy is AZAffinity, this setting ensures that readonly commands are directed to replicas within
+            the specified AZ if exits.
+            If ReadFrom strategy is AZAffinityReplicasAndPrimary, this setting ensures that readonly commands are directed to
+            nodes (first replicas then primary) within the specified AZ if they exist.
+        advanced_config (Optional[AdvancedGlideClusterClientConfiguration]) : Advanced configuration settings for the client,
+            see `AdvancedGlideClusterClientConfiguration`.
+
+
+    Note:
+        Currently, the reconnection strategy in cluster mode is not configurable, and exponential backoff
+        with fixed values is used.
+    """
+
+    class PubSubChannelModes(IntEnum):
+        """
+        Describes pubsub subsciption modes.
+        See [valkey.io](https://valkey.io/docs/topics/pubsub/) for more details
+        """
+
+        Exact = 0
+        """ Use exact channel names """
+        Pattern = 1
+        """ Use channel name patterns """
+        Sharded = 2
+        """ Use sharded pubsub. Available since Valkey version 7.0. """
+
+    @dataclass
+    class PubSubSubscriptions:
+        """Describes pubsub configuration for cluster mode client.
+
+        Attributes:
+            channels_and_patterns (Dict[GlideClusterClientConfiguration.PubSubChannelModes, Set[str]]):
+                Channels and patterns by modes.
+            callback (Optional[Callable[[PubSubMsg, Any], None]]):
+                Optional callback to accept the incoming messages.
+            context (Any):
+                Arbitrary context to pass to the callback.
+        """
+
+        channels_and_patterns: Dict[
+            GlideClusterClientConfiguration.PubSubChannelModes, Set[str]
+        ]
+        callback: Optional[Callable[[PubSubMsg, Any], None]]
+        context: Any
+
+    def __init__(
+        self,
+        addresses: List[NodeAddress],
+        use_tls: bool = False,
+        credentials: Optional[ServerCredentials] = None,
+        read_from: ReadFrom = ReadFrom.PRIMARY,
+        request_timeout: Optional[int] = None,
+        reconnect_strategy: Optional[BackoffStrategy] = None,
+        database_id: Optional[int] = None,
+        client_name: Optional[str] = None,
+        protocol: ProtocolVersion = ProtocolVersion.RESP3,
+        periodic_checks: Union[
+            PeriodicChecksStatus, PeriodicChecksManualInterval
+        ] = PeriodicChecksStatus.ENABLED_DEFAULT_CONFIGS,
+        pubsub_subscriptions: Optional[PubSubSubscriptions] = None,
+        inflight_requests_limit: Optional[int] = None,
+        client_az: Optional[str] = None,
+        advanced_config: Optional[AdvancedGlideClusterClientConfiguration] = None,
+        lazy_connect: Optional[bool] = None,
+    ):
+        super().__init__(
+            addresses=addresses,
+            use_tls=use_tls,
+            credentials=credentials,
+            read_from=read_from,
+            request_timeout=request_timeout,
+            reconnect_strategy=reconnect_strategy,
+            database_id=database_id,
+            client_name=client_name,
+            protocol=protocol,
+            inflight_requests_limit=inflight_requests_limit,
+            client_az=client_az,
+            advanced_config=advanced_config,
+            lazy_connect=lazy_connect,
+        )
+        self.periodic_checks = periodic_checks
+        self.pubsub_subscriptions = pubsub_subscriptions
+
+    def _create_a_protobuf_conn_request(
+        self, cluster_mode: bool = False
+    ) -> ConnectionRequest:
+        assert cluster_mode is True
+        request = super()._create_a_protobuf_conn_request(cluster_mode)
+        if type(self.periodic_checks) is PeriodicChecksManualInterval:
+            request.periodic_checks_manual_interval.duration_in_sec = (
+                self.periodic_checks.duration_in_sec
+            )
+        elif self.periodic_checks == PeriodicChecksStatus.DISABLED:
+            request.periodic_checks_disabled.SetInParent()
+
+        if self.pubsub_subscriptions:
+            if self.protocol == ProtocolVersion.RESP2:
+                raise ConfigurationError(
+                    "PubSub subscriptions require RESP3 protocol, but RESP2 was configured."
+                )
+            if (
+                self.pubsub_subscriptions.context is not None
+                and not self.pubsub_subscriptions.callback
+            ):
+                raise ConfigurationError(
+                    "PubSub subscriptions with a context require a callback function to be configured."
+                )
+            for (
+                channel_type,
+                channels_patterns,
+            ) in self.pubsub_subscriptions.channels_and_patterns.items():
+                entry = request.pubsub_subscriptions.channels_or_patterns_by_type[
+                    int(channel_type)
+                ]
+                for channel_pattern in channels_patterns:
+                    entry.channels_or_patterns.append(str.encode(channel_pattern))
+
+        if self.lazy_connect is not None:
+            request.lazy_connect = self.lazy_connect
+        return request
+
+    def _is_pubsub_configured(self) -> bool:
+        return self.pubsub_subscriptions is not None
+
+    def _get_pubsub_callback_and_context(
+        self,
+    ) -> Tuple[Optional[Callable[[PubSubMsg, Any], None]], Any]:
+        if self.pubsub_subscriptions:
+            return self.pubsub_subscriptions.callback, self.pubsub_subscriptions.context
+        return None, None
+
+
+def load_root_certificates_from_file(path: str) -> bytes:
+    """
+    Load PEM-encoded root certificates from a file.
+
+    This is a convenience function for loading custom root certificates from disk
+    to be used with TlsAdvancedConfiguration.
+
+    Args:
+        path (str): The file path to the PEM-encoded certificate file.
+
+    Returns:
+        bytes: The certificate data in PEM format.
+
+    Raises:
+        FileNotFoundError: If the certificate file does not exist.
+        ConfigurationError: If the certificate file is empty.
+
+    Example usage::
+
+        from glide_shared.config import load_root_certificates_from_file, TlsAdvancedConfiguration
+
+        # Load certificates from file
+        certs = load_root_certificates_from_file('/path/to/ca-cert.pem')
+
+        # Use in TLS configuration
+        tls_config = TlsAdvancedConfiguration(root_pem_cacerts=certs)
+    """
+    try:
+        with open(path, "rb") as f:
+            data = f.read()
+    except FileNotFoundError:
+        raise FileNotFoundError(f"Certificate file not found: {path}")
+    except Exception as e:
+        raise ConfigurationError(f"Failed to read certificate file: {e}")
+
+    if len(data) == 0:
+        raise ConfigurationError(f"Certificate file is empty: {path}")
+
+    return data